[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAATdQgAYrq7sHJQN=_5ipH0N_kbixjac=BLFCYv5jTScH_c+Lw@mail.gmail.com>
Date: Mon, 29 Mar 2021 14:23:52 +0800
From: Ikjoon Jang <ikjn@...omium.org>
To: Takashi Iwai <tiwai@...e.de>
Cc: Joakim Tjernlund <Joakim.Tjernlund@...inera.com>,
Jaroslav Kysela <perex@...ex.cz>, alsa-devel@...a-project.org,
Takashi Iwai <tiwai@...e.com>,
Gregor Pintar <grpintar@...il.com>, linux-usb@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Dylan Robinson <dylan_robinson@...u.com>,
Kai-Heng Feng <kai.heng.feng@...onical.com>,
Olivia Mackintosh <livvy@...e.nu>,
Alexander Tsoy <alexander@...y.me>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ALSA: usb-audio: Apply sample rate quirk to Logitech Connect
On Wed, Mar 24, 2021 at 8:49 PM Takashi Iwai <tiwai@...e.de> wrote:
>
> On Wed, 24 Mar 2021 13:03:14 +0100,
> Ikjoon Jang wrote:
> >
> > On Wed, Mar 24, 2021, 7:16 PM Joakim Tjernlund <Joakim.Tjernlund@...inera.com>
> > wrote:
> >
> > On Wed, 2021-03-24 at 18:51 +0800, Ikjoon Jang wrote:
> > > Logitech ConferenceCam Connect is a compound USB device with UVC and
> > > UAC. Not 100% reproducible but sometimes it keeps responding STALL to
> > > every control transfer once it receives get_freq request.
> > >
> > > This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.
> > >
> > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419
> > > Signed-off-by: Ikjoon Jang <ikjn@...omium.org>
> >
> > Most Logitech USB headset I got needs a delay in snd_usb_ctl_msg_quirk()
> > Have you tried to add say 20 ms delay in there?
> >
> > I didn't try that. But it sounds reasonable to me.
> >
> > let me try that quirk here. If that is the case, HID might need that delay
> > also. Logitech Group webcam had a similar problem on control xfer of
> > get_report from an another interface for HID.
>
> The Logitech devices with 046d:* should be covered generally in
> snd_usb_ctl_msg_quirk(), so I guess it's a different problem.
> But please check it first.
>
> > And 20ms can be too long if it's applied to every control transfer. I will
> > test the device with shorter delay if you didn't try it before.
>
> Actually the delay applied to Logitech devices is from 1 to 2ms, not
> 20ms. The 20ms delay is applied for some other devices. But if
> extending the delay fixes the problem, we need to reconsider the delay
> length.
I tested this Logitech device with various delays 2..20ms
in snd_usb_ctl_msg_quirk() but it didn't help.
Disregarding the delay between control transfers,
This device is always stuck at get_cur, responding STALL to all
control transfers.
[ 24.045618] usb 1-1.2.1.1: 1:1: cannot get freq at ep 0x82
[ 24.167475] usb 1-1.2.1.1: 2:0: cannot get min/max values for
control 2 (id 2)
[ 24.287393] usb 1-1.2.1.1: 6:0: cannot get min/max values for
control 2 (id 6)
[ 24.289854] usbcore: registered new interface driver snd-usb-audio
[ 24.877073] usb 1-1.2.1.1: 2:1: usb_set_interface failed (-32)
And I've also found that in some other platforms (with the same kernel),
this device fails at get_freq - timeout with NYETs or NAKs (instead of STALL),
and succeeded in following set_interface even without any delays
I've tried but couldn't find any differences between the two. ;-(
So until now, I think this approach of skipping get_rate is the only
one possible
workaround for Logitech Connect.
>
>
> Takashi
Powered by blists - more mailing lists