| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210330071958.3788214-1-slyfox@gentoo.org>
Date: Tue, 30 Mar 2021 08:19:56 +0100
From: Sergei Trofimovich <slyfox@...too.org>
To: "Martin K. Petersen" <martin.petersen@...cle.com>,
Arnd Bergmann <arnd@...nel.org>,
John Paul Adrian Glaubitz <glaubitz@...sik.fu-berlin.de>,
Don Brace <don.brace@...rochip.com>,
linux-ia64@...r.kernel.org, storagedev@...rochip.com,
linux-scsi <linux-scsi@...r.kernel.org>, jszczype@...hat.com,
Scott Benesh <scott.benesh@...rochip.com>,
Scott Teel <scott.teel@...rochip.com>, thenzl@...hat.com
Cc: linux-kernel@...r.kernel.org,
Sergei Trofimovich <slyfox@...too.org>
Subject: [PATCH v2 1/3] hpsa: use __packed on individual structs, not header-wide
Some of the structs contain `atomic_t` values and are not intended to be
sent to IO controller as is.
The change adds __packed to every struct and union in the file.
Follow-up commits will fix `atomic_t` problems.
The commit is a no-op at least on ia64:
$ diff -u <(objdump -d -r old.o) <(objdump -d -r new.o)
CC: linux-ia64@...r.kernel.org
CC: storagedev@...rochip.com
CC: linux-scsi@...r.kernel.org
CC: Joe Szczypek <jszczype@...hat.com>
CC: Scott Benesh <scott.benesh@...rochip.com>
CC: Scott Teel <scott.teel@...rochip.com>
CC: Tomas Henzl <thenzl@...hat.com>
CC: "Martin K. Petersen" <martin.petersen@...cle.com>
CC: Don Brace <don.brace@...rochip.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@...sik.fu-berlin.de>
Suggested-by: Don Brace <don.brace@...rochip.com>
Fixes: f749d8b7a "scsi: hpsa: Correct dev cmds outstanding for retried cmds"
Signed-off-by: Sergei Trofimovich <slyfox@...too.org>
---
drivers/scsi/hpsa_cmd.h | 68 ++++++++++++++++++++---------------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index d126bb877250..280e933d27e7 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -20,6 +20,8 @@
#ifndef HPSA_CMD_H
#define HPSA_CMD_H
+#include <linux/compiler.h>
+
/* general boundary defintions */
#define SENSEINFOBYTES 32 /* may vary between hbas */
#define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */
@@ -200,12 +202,10 @@ union u64bit {
MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */
/* SCSI-3 Commands */
-#pragma pack(1)
-
#define HPSA_INQUIRY 0x12
struct InquiryData {
u8 data_byte[36];
-};
+} __packed;
#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */
#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */
@@ -221,7 +221,7 @@ struct raid_map_disk_data {
u8 xor_mult[2]; /**< XOR multipliers for this position,
* valid for data disks only */
u8 reserved[2];
-};
+} __packed;
struct raid_map_data {
__le32 structure_size; /* Size of entire structure in bytes */
@@ -247,14 +247,14 @@ struct raid_map_data {
__le16 dekindex; /* Data encryption key index. */
u8 reserved[16];
struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES];
-};
+} __packed;
struct ReportLUNdata {
u8 LUNListLength[4];
u8 extended_response_flag;
u8 reserved[3];
u8 LUN[HPSA_MAX_LUN][8];
-};
+} __packed;
struct ext_report_lun_entry {
u8 lunid[8];
@@ -269,20 +269,20 @@ struct ext_report_lun_entry {
u8 lun_count; /* multi-lun device, how many luns */
u8 redundant_paths;
u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
-};
+} __packed;
struct ReportExtendedLUNdata {
u8 LUNListLength[4];
u8 extended_response_flag;
u8 reserved[3];
struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN];
-};
+} __packed;
struct SenseSubsystem_info {
u8 reserved[36];
u8 portname[8];
u8 reserved1[1108];
-};
+} __packed;
/* BMIC commands */
#define BMIC_READ 0x26
@@ -317,7 +317,7 @@ union SCSI3Addr {
u8 Targ:6;
u8 Mode:2; /* b10 */
} LogUnit;
-};
+} __packed;
struct PhysDevAddr {
u32 TargetId:24;
@@ -325,20 +325,20 @@ struct PhysDevAddr {
u32 Mode:2;
/* 2 level target device addr */
union SCSI3Addr Target[2];
-};
+} __packed;
struct LogDevAddr {
u32 VolId:30;
u32 Mode:2;
u8 reserved[4];
-};
+} __packed;
union LUNAddr {
u8 LunAddrBytes[8];
union SCSI3Addr SCSI3Lun[4];
struct PhysDevAddr PhysDev;
struct LogDevAddr LogDev;
-};
+} __packed;
struct CommandListHeader {
u8 ReplyQueue;
@@ -346,7 +346,7 @@ struct CommandListHeader {
__le16 SGTotal;
__le64 tag;
union LUNAddr LUN;
-};
+} __packed;
struct RequestBlock {
u8 CDBLen;
@@ -365,18 +365,18 @@ struct RequestBlock {
#define GET_DIR(tad) (((tad) >> 6) & 0x03)
u16 Timeout;
u8 CDB[16];
-};
+} __packed;
struct ErrDescriptor {
__le64 Addr;
__le32 Len;
-};
+} __packed;
struct SGDescriptor {
__le64 Addr;
__le32 Len;
__le32 Ext;
-};
+} __packed;
union MoreErrInfo {
struct {
@@ -390,7 +390,8 @@ union MoreErrInfo {
u8 offense_num; /* byte # of offense 0-base */
u32 offense_value;
} Invalid_Cmd;
-};
+} __packed;
+
struct ErrorInfo {
u8 ScsiStatus;
u8 SenseLen;
@@ -398,7 +399,7 @@ struct ErrorInfo {
u32 ResidualCnt;
union MoreErrInfo MoreErrInfo;
u8 SenseInfo[SENSEINFOBYTES];
-};
+} __packed;
/* Command types */
#define CMD_IOCTL_PEND 0x01
#define CMD_SCSI 0x03
@@ -451,7 +452,7 @@ struct CommandList {
bool retry_pending;
struct hpsa_scsi_dev_t *device;
atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
-} __aligned(COMMANDLIST_ALIGNMENT);
+} __packed __aligned(COMMANDLIST_ALIGNMENT);
/* Max S/G elements in I/O accelerator command */
#define IOACCEL1_MAXSGENTRIES 24
@@ -489,7 +490,7 @@ struct io_accel1_cmd {
__le64 host_addr; /* 0x70 - 0x77 */
u8 CISS_LUN[8]; /* 0x78 - 0x7F */
struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
-} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
+} __packed __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
#define IOACCEL1_FUNCTION_SCSIIO 0x00
#define IOACCEL1_SGLOFFSET 32
@@ -519,7 +520,7 @@ struct ioaccel2_sg_element {
u8 chain_indicator;
#define IOACCEL2_CHAIN 0x80
#define IOACCEL2_LAST_SG 0x40
-};
+} __packed;
/*
* SCSI Response Format structure for IO Accelerator Mode 2
@@ -559,7 +560,7 @@ struct io_accel2_scsi_response {
u8 sense_data_len; /* sense/response data length */
u8 resid_cnt[4]; /* residual count */
u8 sense_data_buff[32]; /* sense/response data buffer */
-};
+} __packed;
/*
* Structure for I/O accelerator (mode 2 or m2) commands.
@@ -592,7 +593,7 @@ struct io_accel2_cmd {
__le32 tweak_upper; /* Encryption tweak, upper 4 bytes */
struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
struct io_accel2_scsi_response error_data;
-} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
+} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
/*
* defines for Mode 2 command struct
@@ -618,7 +619,7 @@ struct hpsa_tmf_struct {
__le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */
__le64 error_ptr; /* Error Pointer */
__le32 error_len; /* Error Length */
-} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
+} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
/* Configuration Table Structure */
struct HostWrite {
@@ -626,7 +627,7 @@ struct HostWrite {
__le32 command_pool_addr_hi;
__le32 CoalIntDelay;
__le32 CoalIntCount;
-};
+} __packed;
#define SIMPLE_MODE 0x02
#define PERFORMANT_MODE 0x04
@@ -675,7 +676,7 @@ struct CfgTable {
#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
__le32 clear_event_notify;
-};
+} __packed;
#define NUM_BLOCKFETCH_ENTRIES 8
struct TransTable_struct {
@@ -686,14 +687,14 @@ struct TransTable_struct {
__le32 RepQCtrAddrHigh32;
#define MAX_REPLY_QUEUES 64
struct vals32 RepQAddr[MAX_REPLY_QUEUES];
-};
+} __packed;
struct hpsa_pci_info {
unsigned char bus;
unsigned char dev_fn;
unsigned short domain;
u32 board_id;
-};
+} __packed;
struct bmic_identify_controller {
u8 configured_logical_drive_count; /* offset 0 */
@@ -702,7 +703,7 @@ struct bmic_identify_controller {
u8 pad2[136];
u8 controller_mode; /* offset 292 */
u8 pad3[32];
-};
+} __packed;
struct bmic_identify_physical_device {
@@ -845,7 +846,7 @@ struct bmic_identify_physical_device {
u8 max_link_rate[256];
u8 neg_phys_link_rate[256];
u8 box_conn_name[8];
-} __attribute((aligned(512)));
+} __packed __attribute((aligned(512)));
struct bmic_sense_subsystem_info {
u8 primary_slot_number;
@@ -858,7 +859,7 @@ struct bmic_sense_subsystem_info {
u8 secondary_array_serial_number[32];
u8 secondary_cache_serial_number[32];
u8 pad[332];
-};
+} __packed;
struct bmic_sense_storage_box_params {
u8 reserved[36];
@@ -870,7 +871,6 @@ struct bmic_sense_storage_box_params {
u8 reserver_3[84];
u8 phys_connector[2];
u8 reserved_4[296];
-};
+} __packed;
-#pragma pack()
#endif /* HPSA_CMD_H */
--
2.31.1
Powered by blists - more mailing lists