Message-ID: <HK2PR06MB3300FC50877DC77AF06DED8C8C7C9@HK2PR06MB3300.apcprd06.prod.outlook.com>
Date:   Wed, 31 Mar 2021 06:56:19 +0000
From:   Kuo-Hsiang Chou <kuohsiang_chou@...eedtech.com>
To:     Thomas Zimmermann <tzimmermann@...e.de>,
        "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     "airlied@...ux.ie" <airlied@...ux.ie>,
        Tommy Huang <tommy_huang@...eedtech.com>,
        Jenmin Yuan <jenmin_yuan@...eedtech.com>,
        "airlied@...hat.com" <airlied@...hat.com>,
        Arc Sung <arc_sung@...eedtech.com>
Subject: RE: [PATCH V3] drm/ast: Disable fast reset after DRAM initial

Message-ID: <20201228030823.294147-1-kuohsiang_chou@...eedtech.com>

-----Original Message-----
From: Thomas Zimmermann [mailto:tzimmermann@...e.de] 
Sent: Monday, March 29, 2021 5:17 PM
To: Kuo-Hsiang Chou <kuohsiang_chou@...eedtech.com>; dri-devel@...ts.freedesktop.org; linux-kernel@...r.kernel.org

Subject: Re: [PATCH V3] drm/ast: Disable fast reset after DRAM initial

Hi,

I cannot apply this patch. The error is shown below. Which tree do you use? Can you please move to drm-misc-next?

Applying: drm/ast: Disable fast reset after DRAM initial
error: sha1 information is lacking or useless (drivers/gpu/drm/ast/ast_drv.h).
error: could not build fake ancestor
Patch failed at 0001 drm/ast: Disable fast reset after DRAM initial
hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
dim: ERROR: git apply-mbox failed

Hi, Thomas,

Thanks for the comments, I still use kernel_5.9. Yes, I will move to the latest version of drm-misc-next.
The errors seem to be caused by a pending patch(Message-ID: <20201228030823.294147-1-kuohsiang_chou@...eedtech.com>). 
And I submitted current patch before reviewer result of pending patch(Message-ID: <20201228030823.294147-1-kuohsiang_chou@...eedtech.com>).

Please give an instruction how to works to next step. 
Continue waiting for the reviewer result, or move to kernel_5.12-rc1 and submit the pending patch again? Or other suggestions?
Thanks!

Best Regards,
	Kuo-Hsiang Chou

Best regards
Thomas


Am 19.03.21 um 10:23 schrieb KuoHsiang Chou:
> [Bug][AST2500]
> 
> V1:
> When AST2500 acts as stand-alone VGA so that DRAM and DVO 
> initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling.
> However, HW suggests disable Fast reset mode after DRAM initializaton, 
> because fast reset mode is mainly designed for ARM ICE debugger.
> Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should 
> be first enabled to avoid system deadlock before disable fast reset mode.
> 
> V2:
> Use to_pci_dev() to get revision of PCI configuration.
> 
> V3:
> If SCU00 is not unlocked, just enter its password again.
> It is unnecessary to clear AHB lock condition and restore WDT default 
> setting again, before Fast-reset clearing.
> 
> Signed-off-by: KuoHsiang Chou <kuohsiang_chou@...eedtech.com>
> ---
>   drivers/gpu/drm/ast/ast_drv.h  |  1 +
>   drivers/gpu/drm/ast/ast_main.c |  5 +++
>   drivers/gpu/drm/ast/ast_post.c | 68 +++++++++++++++++++++-------------
>   3 files changed, 48 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/gpu/drm/ast/ast_drv.h 
> b/drivers/gpu/drm/ast/ast_drv.h index da6dfb677540..a2cf5fef2399 
> 100644
> --- a/drivers/gpu/drm/ast/ast_drv.h
> +++ b/drivers/gpu/drm/ast/ast_drv.h
> @@ -320,6 +320,7 @@ bool ast_is_vga_enabled(struct drm_device *dev);
>   void ast_post_gpu(struct drm_device *dev);
>   u32 ast_mindwm(struct ast_private *ast, u32 r);
>   void ast_moutdwm(struct ast_private *ast, u32 r, u32 v);
> +void ast_patch_ahb_2500(struct ast_private *ast);
>   /* ast dp501 */
>   void ast_set_dp501_video_output(struct drm_device *dev, u8 mode);
>   bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); diff 
> --git a/drivers/gpu/drm/ast/ast_main.c 
> b/drivers/gpu/drm/ast/ast_main.c index 3775fe26f792..0e4dfcc25623 
> 100644
> --- a/drivers/gpu/drm/ast/ast_main.c
> +++ b/drivers/gpu/drm/ast/ast_main.c
> @@ -69,6 +69,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>   {
>   	struct device_node *np = dev->pdev->dev.of_node;
>   	struct ast_private *ast = to_ast_private(dev);
> +	struct pci_dev *pdev = to_pci_dev(dev->dev);
>   	uint32_t data, jregd0, jregd1;
> 
>   	/* Defaults */
> @@ -96,6 +97,10 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>   	jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
>   	jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
>   	if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {
> +		/* Patch AST2500 */
> +		if (((pdev->revision & 0xF0) == 0x40) && ((jregd0 & 0xC0) == 0))
> +			ast_patch_ahb_2500(ast);
> +
>   		/* Double check it's actually working */
>   		data = ast_read32(ast, 0xf004);
>   		if (data != 0xFFFFFFFF) {
> diff --git a/drivers/gpu/drm/ast/ast_post.c 
> b/drivers/gpu/drm/ast/ast_post.c index 8902c2f84bf9..4f194c5fd2c2 
> 100644
> --- a/drivers/gpu/drm/ast/ast_post.c
> +++ b/drivers/gpu/drm/ast/ast_post.c
> @@ -2026,6 +2026,30 @@ static bool ast_dram_init_2500(struct ast_private *ast)
>   	return true;
>   }
> 
> +void ast_patch_ahb_2500(struct ast_private *ast) {
> +	u32	data;
> +
> +	/* Clear bus lock condition */
> +	ast_moutdwm(ast, 0x1e600000, 0xAEED1A03);
> +	ast_moutdwm(ast, 0x1e600084, 0x00010000);
> +	ast_moutdwm(ast, 0x1e600088, 0x00000000);
> +	ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8);
> +	data = ast_mindwm(ast, 0x1e6e2070);
> +	if (data & 0x08000000) {					/* check fast reset */
> +
> +		ast_moutdwm(ast, 0x1E785004, 0x00000010);
> +		ast_moutdwm(ast, 0x1E785008, 0x00004755);
> +		ast_moutdwm(ast, 0x1E78500c, 0x00000033);
> +		udelay(1000);
> +	}
> +	do {
> +		ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8);
> +		data = ast_mindwm(ast, 0x1e6e2000);
> +	}	while (data != 1);
> +	ast_moutdwm(ast, 0x1e6e207c, 0x08000000);	/* clear fast reset */
> +}
> +
>   void ast_post_chip_2500(struct drm_device *dev)
>   {
>   	struct ast_private *ast = to_ast_private(dev); @@ -2033,39 +2057,31 
> @@ void ast_post_chip_2500(struct drm_device *dev)
>   	u8 reg;
> 
>   	reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
> -	if ((reg & 0x80) == 0) {/* vga only */
> +	if ((reg & 0xC0) == 0) {/* vga only */
>   		/* Clear bus lock condition */
> -		ast_moutdwm(ast, 0x1e600000, 0xAEED1A03);
> -		ast_moutdwm(ast, 0x1e600084, 0x00010000);
> -		ast_moutdwm(ast, 0x1e600088, 0x00000000);
> -		ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8);
> -		ast_write32(ast, 0xf004, 0x1e6e0000);
> -		ast_write32(ast, 0xf000, 0x1);
> -		ast_write32(ast, 0x12000, 0x1688a8a8);
> -		while (ast_read32(ast, 0x12000) != 0x1)
> -			;
> -
> -		ast_write32(ast, 0x10000, 0xfc600309);
> -		while (ast_read32(ast, 0x10000) != 0x1)
> -			;
> +		ast_patch_ahb_2500(ast);
> +
> +		/* Disable watchdog */
> +		ast_moutdwm(ast, 0x1E78502C, 0x00000000);
> +		ast_moutdwm(ast, 0x1E78504C, 0x00000000);
> +		/* Reset USB port */
> +		ast_moutdwm(ast, 0x1E6E2090, 0x20000000);
> +		ast_moutdwm(ast, 0x1E6E2094, 0x00004000);
> +		if (ast_mindwm(ast, 0x1E6E2070) & 0x00800000) {
> +			ast_moutdwm(ast, 0x1E6E207C, 0x00800000);
> +			mdelay(100);
> +			ast_moutdwm(ast, 0x1E6E2070, 0x00800000);
> +		}
> +		/* Modify eSPI reset pin */
> +		temp = ast_mindwm(ast, 0x1E6E2070);
> +		if (temp & 0x02000000)
> +			ast_moutdwm(ast, 0x1E6E207C, 0x00004000);
> 
>   		/* Slow down CPU/AHB CLK in VGA only mode */
>   		temp = ast_read32(ast, 0x12008);
>   		temp |= 0x73;
>   		ast_write32(ast, 0x12008, temp);
> 
> -		/* Reset USB port to patch USB unknown device issue */
> -		ast_moutdwm(ast, 0x1e6e2090, 0x20000000);
> -		temp  = ast_mindwm(ast, 0x1e6e2094);
> -		temp |= 0x00004000;
> -		ast_moutdwm(ast, 0x1e6e2094, temp);
> -		temp  = ast_mindwm(ast, 0x1e6e2070);
> -		if (temp & 0x00800000) {
> -			ast_moutdwm(ast, 0x1e6e207c, 0x00800000);
> -			mdelay(100);
> -			ast_moutdwm(ast, 0x1e6e2070, 0x00800000);
> -		}
> -
>   		if (!ast_dram_init_2500(ast))
>   			drm_err(dev, "DRAM init failed !\n");
> 
> --
> 2.18.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


Content of type "message/rfc822" skipped

Powered by blists - more mailing lists