| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210407083315.b3f7527e931fe6c1f4bfc553@intel.com>
Date: Wed, 7 Apr 2021 08:33:15 +1200
From: Kai Huang <kai.huang@...el.com>
To: Borislav Petkov <bp@...en8.de>
Cc: kvm@...r.kernel.org, linux-sgx@...r.kernel.org, x86@...nel.org,
linux-kernel@...r.kernel.org, seanjc@...gle.com, jarkko@...nel.org,
luto@...nel.org, dave.hansen@...el.com, rick.p.edgecombe@...el.com,
haitao.huang@...el.com, pbonzini@...hat.com, tglx@...utronix.de,
mingo@...hat.com, hpa@...or.com
Subject: Re: [PATCH v3 13/25] x86/sgx: Add helpers to expose ECREATE and
EINIT to KVM
On Tue, 6 Apr 2021 19:08:58 +0200 Borislav Petkov wrote:
> On Tue, Apr 06, 2021 at 09:41:52PM +1200, Kai Huang wrote:
> > > Ok, I'll make the changes and you can redo the KVM rest ontop.
> > >
> >
> > Thank you!
>
> I.e., something like this:
Looks good. I'll update KVM part patches based on this one.
Thanks.
>
> ---
> From: Sean Christopherson <sean.j.christopherson@...el.com>
> Date: Fri, 19 Mar 2021 20:23:08 +1300
> Subject: [PATCH] x86/sgx: Add helpers to expose ECREATE and EINIT to KVM
>
> The host kernel must intercept ECREATE to impose policies on guests, and
> intercept EINIT to be able to write guest's virtual SGX_LEPUBKEYHASH MSR
> values to hardware before running guest's EINIT so it can run correctly
> according to hardware behavior.
>
> Provide wrappers around __ecreate() and __einit() to hide the ugliness
> of overloading the ENCLS return value to encode multiple error formats
> in a single int. KVM will trap-and-execute ECREATE and EINIT as part
> of SGX virtualization, and reflect ENCLS execution result to guest by
> setting up guest's GPRs, or on an exception, injecting the correct fault
> based on return value of __ecreate() and __einit().
>
> Use host userspace addresses (provided by KVM based on guest physical
> address of ENCLS parameters) to execute ENCLS/EINIT when possible.
> Accesses to both EPC and memory originating from ENCLS are subject to
> segmentation and paging mechanisms. It's also possible to generate
> kernel mappings for ENCLS parameters by resolving PFN but using
> __uaccess_xx() is simpler.
>
> [ bp: Return early if the __user memory accesses fail. ]
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@...el.com>
> Signed-off-by: Kai Huang <kai.huang@...el.com>
> Signed-off-by: Borislav Petkov <bp@...e.de>
> Acked-by: Jarkko Sakkinen <jarkko@...nel.org>
> Link: https://lkml.kernel.org/r/20e09daf559aa5e9e680a0b4b5fba940f1bad86e.1616136308.git.kai.huang@intel.com
> ---
> arch/x86/include/asm/sgx.h | 7 ++
> arch/x86/kernel/cpu/sgx/virt.c | 117 +++++++++++++++++++++++++++++++++
> 2 files changed, 124 insertions(+)
>
> diff --git a/arch/x86/include/asm/sgx.h b/arch/x86/include/asm/sgx.h
> index 3b025afec0a7..954042e04102 100644
> --- a/arch/x86/include/asm/sgx.h
> +++ b/arch/x86/include/asm/sgx.h
> @@ -365,4 +365,11 @@ struct sgx_sigstruct {
> * comment!
> */
>
> +#ifdef CONFIG_X86_SGX_KVM
> +int sgx_virt_ecreate(struct sgx_pageinfo *pageinfo, void __user *secs,
> + int *trapnr);
> +int sgx_virt_einit(void __user *sigstruct, void __user *token,
> + void __user *secs, u64 *lepubkeyhash, int *trapnr);
> +#endif
> +
> #endif /* _ASM_X86_SGX_H */
> diff --git a/arch/x86/kernel/cpu/sgx/virt.c b/arch/x86/kernel/cpu/sgx/virt.c
> index 259cc46ad78c..7d221eac716a 100644
> --- a/arch/x86/kernel/cpu/sgx/virt.c
> +++ b/arch/x86/kernel/cpu/sgx/virt.c
> @@ -257,3 +257,120 @@ int __init sgx_vepc_init(void)
>
> return misc_register(&sgx_vepc_dev);
> }
> +
> +/**
> + * sgx_virt_ecreate() - Run ECREATE on behalf of guest
> + * @pageinfo: Pointer to PAGEINFO structure
> + * @secs: Userspace pointer to SECS page
> + * @trapnr: trap number injected to guest in case of ECREATE error
> + *
> + * Run ECREATE on behalf of guest after KVM traps ECREATE for the purpose
> + * of enforcing policies of guest's enclaves, and return the trap number
> + * which should be injected to guest in case of any ECREATE error.
> + *
> + * Return:
> + * - 0: ECREATE was successful.
> + * - <0: on error.
> + */
> +int sgx_virt_ecreate(struct sgx_pageinfo *pageinfo, void __user *secs,
> + int *trapnr)
> +{
> + int ret;
> +
> + /*
> + * @secs is an untrusted, userspace-provided address. It comes from
> + * KVM and is assumed to be a valid pointer which points somewhere in
> + * userspace. This can fault and call SGX or other fault handlers when
> + * userspace mapping @secs doesn't exist.
> + *
> + * Add a WARN() to make sure @secs is already valid userspace pointer
> + * from caller (KVM), who should already have handled invalid pointer
> + * case (for instance, made by malicious guest). All other checks,
> + * such as alignment of @secs, are deferred to ENCLS itself.
> + */
> + if (WARN_ON_ONCE(!access_ok(secs, PAGE_SIZE)))
> + return -EINVAL;
> +
> + __uaccess_begin();
> + ret = __ecreate(pageinfo, (void *)secs);
> + __uaccess_end();
> +
> + if (encls_faulted(ret)) {
> + *trapnr = ENCLS_TRAPNR(ret);
> + return -EFAULT;
> + }
> +
> + /* ECREATE doesn't return an error code, it faults or succeeds. */
> + WARN_ON_ONCE(ret);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(sgx_virt_ecreate);
> +
> +static int __sgx_virt_einit(void __user *sigstruct, void __user *token,
> + void __user *secs)
> +{
> + int ret;
> +
> + /*
> + * Make sure all userspace pointers from caller (KVM) are valid.
> + * All other checks deferred to ENCLS itself. Also see comment
> + * for @secs in sgx_virt_ecreate().
> + */
> +#define SGX_EINITTOKEN_SIZE 304
> + if (WARN_ON_ONCE(!access_ok(sigstruct, sizeof(struct sgx_sigstruct)) ||
> + !access_ok(token, SGX_EINITTOKEN_SIZE) ||
> + !access_ok(secs, PAGE_SIZE)))
> + return -EINVAL;
> +
> + __uaccess_begin();
> + ret = __einit((void *)sigstruct, (void *)token, (void *)secs);
> + __uaccess_end();
> +
> + return ret;
> +}
> +
> +/**
> + * sgx_virt_einit() - Run EINIT on behalf of guest
> + * @sigstruct: Userspace pointer to SIGSTRUCT structure
> + * @token: Userspace pointer to EINITTOKEN structure
> + * @secs: Userspace pointer to SECS page
> + * @lepubkeyhash: Pointer to guest's *virtual* SGX_LEPUBKEYHASH MSR values
> + * @trapnr: trap number injected to guest in case of EINIT error
> + *
> + * Run EINIT on behalf of guest after KVM traps EINIT. If SGX_LC is available
> + * in host, SGX driver may rewrite the hardware values at wish, therefore KVM
> + * needs to update hardware values to guest's virtual MSR values in order to
> + * ensure EINIT is executed with expected hardware values.
> + *
> + * Return:
> + * - 0: EINIT was successful.
> + * - <0: on error.
> + */
> +int sgx_virt_einit(void __user *sigstruct, void __user *token,
> + void __user *secs, u64 *lepubkeyhash, int *trapnr)
> +{
> + int ret;
> +
> + if (!cpu_feature_enabled(X86_FEATURE_SGX_LC)) {
> + ret = __sgx_virt_einit(sigstruct, token, secs);
> + } else {
> + preempt_disable();
> +
> + sgx_update_lepubkeyhash(lepubkeyhash);
> +
> + ret = __sgx_virt_einit(sigstruct, token, secs);
> + preempt_enable();
> + }
> +
> + /* Propagate up the error from the WARN_ON_ONCE in __sgx_virt_einit() */
> + if (ret == -EINVAL)
> + return ret;
> +
> + if (encls_faulted(ret)) {
> + *trapnr = ENCLS_TRAPNR(ret);
> + return -EFAULT;
> + }
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(sgx_virt_einit);
> --
> 2.29.2
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
Powered by blists - more mailing lists