| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAE2upjR2062tGztm15NVTTKOACtrO-Rc4PH7t=_t-Bm5RGzVhw@mail.gmail.com>
Date: Wed, 7 Apr 2021 11:45:30 -0400
From: Rajneesh Bhardwaj <irenic.rajneesh@...il.com>
To: "David E. Box" <david.e.box@...ux.intel.com>
Cc: hdegoede@...hat.com, mgross@...ux.intel.com,
gayatri.kammela@...el.com, platform-driver-x86@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 6/9] platform/x86: intel_pmc_core: Add requirements file
to debugfs
On Wed, Mar 31, 2021 at 11:06 PM David E. Box
<david.e.box@...ux.intel.com> wrote:
>
> From: Gayatri Kammela <gayatri.kammela@...el.com>
>
> Add the debugfs file, substate_requirements, to view the low power mode
> (LPM) requirements for each enabled mode alongside the last latched status
> of the condition.
>
> After this patch, the new file will look like this:
>
> Element | S0i2.0 | S0i3.0 | S0i2.1 | S0i3.1 | S0i3.2 | Status |
> USB2PLL_OFF_STS | Required | Required | Required | Required | Required | |
> PCIe/USB3.1_Gen2PLL_OFF_STS | Required | Required | Required | Required | Required | |
> PCIe_Gen3PLL_OFF_STS | Required | Required | Required | Required | Required | Yes |
> OPIOPLL_OFF_STS | Required | Required | Required | Required | Required | Yes |
> OCPLL_OFF_STS | Required | Required | Required | Required | Required | Yes |
> MainPLL_OFF_STS | | Required | | Required | Required | |
>
> Signed-off-by: Gayatri Kammela <gayatri.kammela@...el.com>
> Co-developed-by: David E. Box <david.e.box@...ux.intel.com>
> Signed-off-by: David E. Box <david.e.box@...ux.intel.com>
> ---
> drivers/platform/x86/intel_pmc_core.c | 86 +++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
>
> diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
> index 0ec26a4c715e..0b47a1da5f49 100644
> --- a/drivers/platform/x86/intel_pmc_core.c
> +++ b/drivers/platform/x86/intel_pmc_core.c
> @@ -1122,6 +1122,86 @@ static int pmc_core_substate_l_sts_regs_show(struct seq_file *s, void *unused)
> }
> DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_l_sts_regs);
>
> +static void pmc_core_substate_req_header_show(struct seq_file *s)
> +{
> + struct pmc_dev *pmcdev = s->private;
> + int i, mode;
> +
> + seq_printf(s, "%30s |", "Element");
> + pmc_for_each_mode(i, mode, pmcdev)
> + seq_printf(s, " %9s |", pmc_lpm_modes[mode]);
> +
> + seq_printf(s, " %9s |\n", "Status");
> +}
> +
> +static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused)
> +{
> + struct pmc_dev *pmcdev = s->private;
> + const struct pmc_bit_map **maps = pmcdev->map->lpm_sts;
> + const struct pmc_bit_map *map;
> + const int num_maps = pmcdev->map->lpm_num_maps;
> + u32 sts_offset = pmcdev->map->lpm_status_offset;
> + u32 *lpm_req_regs = pmcdev->lpm_req_regs;
> + int mp;
> +
> + /* Display the header */
> + pmc_core_substate_req_header_show(s);
> +
> + /* Loop over maps */
> + for (mp = 0; mp < num_maps; mp++) {
> + u32 req_mask = 0;
> + u32 lpm_status;
> + int mode, idx, i, len = 32;
> +
> + /*
> + * Capture the requirements and create a mask so that we only
> + * show an element if it's required for at least one of the
> + * enabled low power modes
> + */
> + pmc_for_each_mode(idx, mode, pmcdev)
> + req_mask |= lpm_req_regs[mp + (mode * num_maps)];
> +
> + /* Get the last latched status for this map */
> + lpm_status = pmc_core_reg_read(pmcdev, sts_offset + (mp * 4));
> +
> + /* Loop over elements in this map */
> + map = maps[mp];
> + for (i = 0; map[i].name && i < len; i++) {
> + u32 bit_mask = map[i].bit_mask;
> +
> + if (!(bit_mask & req_mask))
> + /*
> + * Not required for any enabled states
> + * so don't display
> + */
> + continue;
> +
> + /* Display the element name in the first column */
> + seq_printf(s, "%30s |", map[i].name);
> +
> + /* Loop over the enabled states and display if required */
> + pmc_for_each_mode(idx, mode, pmcdev) {
> + if (lpm_req_regs[mp + (mode * num_maps)] & bit_mask)
> + seq_printf(s, " %9s |",
> + "Required");
> + else
> + seq_printf(s, " %9s |", " ");
> + }
> +
> + /* In Status column, show the last captured state of this agent */
> + if (lpm_status & bit_mask)
> + seq_printf(s, " %9s |", "Yes");
> + else
> + seq_printf(s, " %9s |", " ");
Why is this left blank, maybe NA (Not Available)?
> +
> + seq_puts(s, "\n");
> + }
> + }
> +
> + return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_req_regs);
> +
> static int pmc_core_pkgc_show(struct seq_file *s, void *unused)
> {
> struct pmc_dev *pmcdev = s->private;
> @@ -1241,6 +1321,12 @@ static void pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
> pmcdev->dbgfs_dir, pmcdev,
> &pmc_core_substate_l_sts_regs_fops);
> }
> +
> + if (pmcdev->lpm_req_regs) {
> + debugfs_create_file("substate_requirements", 0444,
> + pmcdev->dbgfs_dir, pmcdev,
> + &pmc_core_substate_req_regs_fops);
> + }
> }
>
> static const struct x86_cpu_id intel_pmc_core_ids[] = {
> --
> 2.25.1
>
--
Thanks,
Rajneesh
Powered by blists - more mailing lists