lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJMQK-gXfR2Ca-Ay5fwcRgQ4F6h4xXVt1bbAL+3LFwgotwYREA@mail.gmail.com>
Date:   Fri, 9 Apr 2021 15:16:44 +0800
From:   Hsin-Yi Wang <hsinyi@...omium.org>
To:     Michael Kao <michael.kao@...iatek.com>
Cc:     fan.chen@...iatek.com, Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Linux PM <linux-pm@...r.kernel.org>,
        srv_heupstream@...iatek.com,
        Eduardo Valentin <edubezval@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Devicetree List <devicetree@...r.kernel.org>,
        lkml <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH 1/1] arm64: dts: mt8183-kukui: Enable thermal Tboard

On Fri, Apr 9, 2021 at 3:12 PM Michael Kao <michael.kao@...iatek.com> wrote:
>
> Add Tboard thermal sensor settings.
>
> pull-up voltage: 1800 mv
> pull-up resistor: 75K
>
> Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
> AuxIn = Vsense * 4096 / 1500
>
> TEST=boot kukui
>      check /sys/class/thermal/thermal_zone*/type
>      check /sys/class/thermal/thermal_zone*/temp
the TEST lines can be removed.

>
> Signed-off-by: Michael Kao <michael.kao@...iatek.com>
> Signed-off-by: Nicolas Boichat <drinkcat@...omium.org>
> ---

Tested-by: Hsin-Yi Wang <hsinyi@...omium.org>

This removes following error:
[   10.882325] generic-adc-thermal thermal-sensor1: Thermal zone
sensor register failed: -19
[   10.911912] generic-adc-thermal thermal-sensor2: Thermal zone
sensor register failed: -19

>  arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 14 ++++++++++++++
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi       |  2 +-
>  2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd3..202acb542b12 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -801,6 +801,20 @@
>         status = "okay";
>  };
>
> +&thermal_zones {
> +       Tboard1 {
> +               polling-delay = <1000>; /* milliseconds */
> +               polling-delay-passive = <0>; /* milliseconds */
> +               thermal-sensors = <&tboard_thermistor1>;
> +       };
> +
> +       Tboard2 {
> +               polling-delay = <1000>; /* milliseconds */
> +               polling-delay-passive = <0>; /* milliseconds */
> +               thermal-sensors = <&tboard_thermistor2>;
> +       };
> +};
> +
>  &u3phy {
>         status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 1ad0a1d55d53..f0719dbef249 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -673,7 +673,7 @@
>                         nvmem-cell-names = "calibration-data";
>                 };
>
> -               thermal-zones {
> +               thermal_zones: thermal-zones {
>                         cpu_thermal: cpu_thermal {
>                                 polling-delay-passive = <100>;
>                                 polling-delay = <500>;
> --
> 2.18.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ