linux-kernel - Re: [PATCH 1/1] arm64: dts: mt8183-kukui: Enable thermal Tboard

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <7ae074f1f80d6c874e5db12d2650e301d8e4a080.camel@mediatek.com>
Date:   Thu, 6 May 2021 13:11:44 +0800
From:   Michael Kao <michael.kao@...iatek.com>
To:     Hsin-Yi Wang <hsinyi@...omium.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        <Ben.Tseng@...iatek.com>
CC:     <fan.chen@...iatek.com>, Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Linux PM <linux-pm@...r.kernel.org>,
        <srv_heupstream@...iatek.com>,
        Eduardo Valentin <edubezval@...il.com>,
        "Rob Herring" <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        "Matthias Brugger" <matthias.bgg@...il.com>,
        Devicetree List <devicetree@...r.kernel.org>,
        lkml <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH 1/1] arm64: dts: mt8183-kukui: Enable thermal Tboard

Hi Maintainers,

Gentle pin for this patch.

Thanks

On Fri, 2021-04-09 at 15:16 +0800, Hsin-Yi Wang wrote:
> On Fri, Apr 9, 2021 at 3:12 PM Michael Kao <michael.kao@...iatek.com>
> wrote:
> > 
> > Add Tboard thermal sensor settings.
> > 
> > pull-up voltage: 1800 mv
> > pull-up resistor: 75K
> > 
> > Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
> > AuxIn = Vsense * 4096 / 1500
> > 
> > TEST=boot kukui
> >      check /sys/class/thermal/thermal_zone*/type
> >      check /sys/class/thermal/thermal_zone*/temp
> 
> the TEST lines can be removed.
> 
> > 
> > Signed-off-by: Michael Kao <michael.kao@...iatek.com>
> > Signed-off-by: Nicolas Boichat <drinkcat@...omium.org>
> > ---
> 
> Tested-by: Hsin-Yi Wang <hsinyi@...omium.org>
> 
> This removes following error:
> [   10.882325] generic-adc-thermal thermal-sensor1: Thermal zone
> sensor register failed: -19
> [   10.911912] generic-adc-thermal thermal-sensor2: Thermal zone
> sensor register failed: -19
> 
> >  arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 14 ++++++++++++++
> >  arch/arm64/boot/dts/mediatek/mt8183.dtsi       |  2 +-
> >  2 files changed, 15 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > index bf2ad1294dd3..202acb542b12 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > @@ -801,6 +801,20 @@
> >         status = "okay";
> >  };
> > 
> > +&thermal_zones {
> > +       Tboard1 {
> > +               polling-delay = <1000>; /* milliseconds */
> > +               polling-delay-passive = <0>; /* milliseconds */
> > +               thermal-sensors = <&tboard_thermistor1>;
> > +       };
> > +
> > +       Tboard2 {
> > +               polling-delay = <1000>; /* milliseconds */
> > +               polling-delay-passive = <0>; /* milliseconds */
> > +               thermal-sensors = <&tboard_thermistor2>;
> > +       };
> > +};
> > +
> >  &u3phy {
> >         status = "okay";
> >  };
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 1ad0a1d55d53..f0719dbef249 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -673,7 +673,7 @@
> >                         nvmem-cell-names = "calibration-data";
> >                 };
> > 
> > -               thermal-zones {
> > +               thermal_zones: thermal-zones {
> >                         cpu_thermal: cpu_thermal {
> >                                 polling-delay-passive = <100>;
> >                                 polling-delay = <500>;
> > --
> > 2.18.0
> >