[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9c577f11-46e7-55a0-95e8-6c3376077049@huawei.com>
Date: Mon, 12 Apr 2021 21:34:30 +0800
From: "liuqi (BA)" <liuqi115@...wei.com>
To: John Garry <john.garry@...wei.com>, Qi Liu <liuqi115@...wei.com>,
<will@...nel.org>, <mark.rutland@....com>, <bhelgaas@...gle.com>
CC: <linux-pci@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <zhangshaokun@...ilicon.com>
Subject: Re: [PATCH v2 1/2] drivers/perf: hisi: Add driver for HiSilicon PCIe
PMU
Hi John,
Thanks for reviewing this.
On 2021/4/9 18:22, John Garry wrote:
> On 09/04/2021 10:05, Qi Liu wrote:
>> PCIe PMU Root Complex Integrated End Point(RCiEP) device is supported
>> to sample bandwidth, latency, buffer occupation etc.
>>
>> Each PMU RCiEP device monitors multiple Root Ports, and each RCiEP is
>> registered as a PMU in /sys/bus/event_source/devices, so users can
>> select target PMU, and use filter to do further sets.
>>
>> Filtering options contains:
>> event - select the event.
>> subevent - select the subevent.
>> port - select target Root Ports. Information of Root Ports
>> are shown under sysfs.
>> bdf - select requester_id of target EP device.
>> trig_len - set trigger condition for starting event statistics.
>> trigger_mode - set trigger mode. 0 means starting to statistic when
>> bigger than trigger condition, and 1 means smaller.
>> thr_len - set threshold for statistics.
>> thr_mode - set threshold mode. 0 means count when bigger than
>> threshold, and 1 means smaller.
>>
>> Signed-off-by: Qi Liu <liuqi115@...wei.com>
>> ---
>> MAINTAINERS | 6 +
>> drivers/perf/Kconfig | 2 +
>> drivers/perf/Makefile | 1 +
>> drivers/perf/pci/Kconfig | 16 +
>> drivers/perf/pci/Makefile | 2 +
>> drivers/perf/pci/hisilicon/Makefile | 5 +
>> drivers/perf/pci/hisilicon/hisi_pcie_pmu.c | 1011
>> ++++++++++++++++++++++++++++
>> include/linux/cpuhotplug.h | 1 +
>> 8 files changed, 1044 insertions(+)
>> create mode 100644 drivers/perf/pci/Kconfig
>> create mode 100644 drivers/perf/pci/Makefile
>> create mode 100644 drivers/perf/pci/hisilicon/Makefile
>> create mode 100644 drivers/perf/pci/hisilicon/hisi_pcie_pmu.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 3353de0..46c7861 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -8023,6 +8023,12 @@ W: http://www.hisilicon.com
>> F: Documentation/admin-guide/perf/hisi-pmu.rst
>> F: drivers/perf/hisilicon
>> +HISILICON PCIE PMU DRIVER
>> +M: Qi Liu <liuqi115@...wei.com>
>> +S: Maintained
>> +F: Documentation/admin-guide/perf/hisi-pcie-pmu.rst
>
> nit: this does not exist yet...
>
thanks, I'll move this add-maintainer-part to the second patch.
>> +F: drivers/perf/pci/hisilicon/hisi_pcie_pmu.c
>> +
>> HISILICON QM AND ZIP Controller DRIVER
>> M: Zhou Wang <wangzhou1@...ilicon.com>
>> L: linux-crypto@...r.kernel.org
>> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
>> index 3075cf1..99d4760 100644
>> --- a/drivers/perf/Kconfig
>> +++ b/drivers/perf/Kconfig
>> @@ -139,4 +139,6 @@ config ARM_DMC620_PMU
>> source "drivers/perf/hisilicon/Kconfig"
>> +source "drivers/perf/pci/Kconfig"
>> +
>> endmenu
>> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
>> index 5260b11..1208c08 100644
>> --- a/drivers/perf/Makefile
>> +++ b/drivers/perf/Makefile
>> @@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
>> obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
>> obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
>> obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
>> +obj-y += pci/
>> diff --git a/drivers/perf/pci/Kconfig b/drivers/perf/pci/Kconfig
>> new file mode 100644
>> index 0000000..a119486
>> --- /dev/null
>> +++ b/drivers/perf/pci/Kconfig
>> @@ -0,0 +1,16 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +#
>> +# PCIe Performance Monitor Drivers
>> +#
>> +menu "PCIe Performance Monitor"
>> +
>> +config HISI_PCIE_PMU
>> + tristate "HiSilicon PCIE PERF PMU"
>> + depends on ARM64 && PCI && HISI_PMU
>
> What from HISI_PMU is needed? I couldn't find anything here
The event_sysfs_show() and format_sysfs_show() function of
hisi_uncore_pmu.h can be reused in hisi_pcie_pmu.c, So I add path in
Makefile and include "hisi_uncore_pmu.h".
>
>> + help
>> + Provide support for HiSilicon PCIe performance monitoring unit
>> (PMU)
>> + RCiEP devices.
>> + Adds the PCIe PMU into perf events system for monitoring latency,
>> + bandwidth etc.
>> +
>> +endmenu
>> diff --git a/drivers/perf/pci/Makefile b/drivers/perf/pci/Makefile
>> new file mode 100644
>> index 0000000..a56b1a9
>> --- /dev/null
>> +++ b/drivers/perf/pci/Makefile
>> @@ -0,0 +1,2 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +obj-y += hisilicon/
>> diff --git a/drivers/perf/pci/hisilicon/Makefile
>> b/drivers/perf/pci/hisilicon/Makefile
>> new file mode 100644
>> index 0000000..6f99f52
>> --- /dev/null
>> +++ b/drivers/perf/pci/hisilicon/Makefile
>> @@ -0,0 +1,5 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +
>> +ccflags-y := -I $(srctree)/drivers/perf/hisilicon
>> +
>> +obj-$(CONFIG_HISI_PCIE_PMU) += hisi_pcie_pmu.o
>> diff --git a/drivers/perf/pci/hisilicon/hisi_pcie_pmu.c
>> b/drivers/perf/pci/hisilicon/hisi_pcie_pmu.c
>> new file mode 100644
>> index 0000000..ac0e444
>> --- /dev/null
>> +++ b/drivers/perf/pci/hisilicon/hisi_pcie_pmu.c
>> @@ -0,0 +1,1011 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * This driver adds support for PCIe PMU RCiEP device. Related
>> + * perf events are bandwidth, bandwidth utilization, latency
>> + * etc.
>> + *
>> + * Copyright (C) 2021 HiSilicon Limited
>> + * Author: Qi Liu<liuqi115@...wei.com>
>> + */
>> +#include <linux/bitfield.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/bug.h>
>> +#include <linux/cpuhotplug.h>
>> +#include <linux/cpumask.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +#include <linux/kernel.h>
>> +#include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/pci.h>
>> +#include <linux/perf_event.h>
>> +
>> +#include "hisi_uncore_pmu.h"
>> +
>> +/* Define registers */
>> +#define HISI_PCIE_GLOBAL_CTRL 0x00
>> +#define HISI_PCIE_EVENT_CTRL 0x010
>> +#define HISI_PCIE_CNT 0x090
>> +#define HISI_PCIE_EXT_CNT 0x110
>> +#define HISI_PCIE_INT_STAT 0x150
>> +#define HISI_PCIE_INT_MASK 0x154
>> +#define HISI_PCIE_REG_BDF 0xfe0
>> +#define HISI_PCIE_REG_VERSION 0xfe4
>> +#define HISI_PCIE_REG_INFO 0xfe8
>> +#define HISI_PCIE_REG_FREQ 0xfec
>> +
>> +/* Define PCIE CTRL CMD */
>> +#define HISI_PCIE_GLOBAL_EN 0x01
>> +#define HISI_PCIE_GLOBAL_NONE 0
>> +#define HISI_PCIE_EVENT_EN BIT(20)
>> +#define HISI_PCIE_RESET_CNT BIT(22)
>> +#define HISI_PCIE_DEFAULT_SET BIT(34)
>> +#define HISI_PCIE_THR_EN BIT(26)
>> +#define HISI_PCIE_TARGET_EN BIT(32)
>> +#define HISI_PCIE_TRIG_EN BIT(52)
>> +
>> +/* Define offsets in event ctrl regesiter */
>> +#define HISI_PCIE_EVENT_M GENMASK_ULL(7, 0)
>> +#define HISI_PCIE_SUBEVENT_M GENMASK_ULL(15, 8)
>> +#define HISI_PCIE_THR_MODE_M GENMASK_ULL(27, 27)
>> +#define HISI_PCIE_THR_M GENMASK_ULL(31, 28)
>> +#define HISI_PCIE_TARGET_M GENMASK_ULL(52, 36)
>> +#define HISI_PCIE_TRIG_MODE_M GENMASK_ULL(53, 53)
>> +#define HISI_PCIE_TRIG_M GENMASK_ULL(59, 56)
>> +
>> +#define HISI_PCIE_MAX_COUNTERS 8
>> +#define HISI_PCIE_REG_STEP 8
>> +#define HISI_PCIE_EVENT_MAX 0xa2
>> +#define HISI_PCIE_SUBEVENT_MAX 0x20
>> +#define HISI_PCIE_THR_MAX_VAL 10
>> +#define HISI_PCIE_TRIG_MAX_VAL 10
>> +#define HISI_PCIE_COUNTER_BITS 64
>> +#define HISI_PCIE_MAX_PERIOD BIT_ULL(63)
>> +
>> +struct hisi_pcie_pmu {
>> + struct perf_event *hw_events[HISI_PCIE_MAX_COUNTERS];
>> + struct hlist_node node;
>> + struct pci_dev *pdev;
>> + struct pmu pmu;
>> + void __iomem *base;
>> + cpumask_t cpumask;
>> + int irq;
>> + u32 identifier;
>> + /* Minimum and maximum bdf of root ports monitored by PMU */
>> + u16 bdf_min;
>> + u16 bdf_max;
>> +};
>> +
>> +#define to_pcie_pmu(p) (container_of((p), struct hisi_pcie_pmu, pmu))
>> +#define GET_PCI_DEVFN(bdf) ((bdf) & 0xff)
>> +
>> +#define HISI_PCIE_PMU_FILTER_ATTR(_name, _config, _hi, _lo) \
>> + static inline u64 hisi_pcie_get_##_name(struct perf_event *event) \
>> + { \
>> + return FIELD_GET(GENMASK(_hi, _lo), event->attr._config); \
>> + } \
>> +
>> +HISI_PCIE_PMU_FILTER_ATTR(event, config, 7, 0);
>> +HISI_PCIE_PMU_FILTER_ATTR(subevent, config, 15, 8);
>> +HISI_PCIE_PMU_FILTER_ATTR(thr_len, config1, 3, 0);
>> +HISI_PCIE_PMU_FILTER_ATTR(thr_mode, config1, 4, 4);
>> +HISI_PCIE_PMU_FILTER_ATTR(trig_len, config1, 8, 5);
>> +HISI_PCIE_PMU_FILTER_ATTR(trig_mode, config1, 9, 9);
>> +HISI_PCIE_PMU_FILTER_ATTR(port, config2, 15, 0);
>> +HISI_PCIE_PMU_FILTER_ATTR(bdf, config2, 31, 16);
>> +
>> +#define HISI_PCIE_CHECK_EVENTS(name, list) \
>
> "check" in a function name is too vague, as it does not imply any
> side-effect from calling this function.
>
> And I think "build" or similar would be good to be included in the macro
> name.
>
>> + static inline bool is_##name##_event(u32 idx) \
>
> why inline?
>
>> +
>> { \
>> + if ((idx >= list[0] && idx <= list[1]) || idx == list[2]) \
>> + return true; \
>> + return false; \
>
> isn't this just:
> {
> return (idx >= list[0] && idx <= list[1]) || idx == list[2])
> }
thanks, will address in next version.
>
>> + }
>> +
>> +/*
>> + * The first element of event list is minimum index of TL-layer events
>> + * and the second element is maximum index. The third element is index
>> + * of a DL-layer event.
>> + */
>> +static const u32 bw_events_list[] = {0x04, 0x08, 0x84};
>> +static const u32 latency_events_list[] = {0x10, 0x15, 0x85};
>> +static const u32 bus_util_events_list[] = {0x20, 0x24, 0x09};
>> +static const u32 buf_util_events_list[] = {0x28, 0x2a, 0x33};
>> +
>> +HISI_PCIE_CHECK_EVENTS(bw, bw_events_list);
>> +HISI_PCIE_CHECK_EVENTS(latency, latency_events_list);
>> +HISI_PCIE_CHECK_EVENTS(bus_util, bus_util_events_list);
>> +HISI_PCIE_CHECK_EVENTS(buf_util, buf_util_events_list);
>
> Surely the macro can be fixed such that you need to have:
> HISI_PCIE_CHECK_EVENTS(buf_util);
>
will address in next version.
>
>> +
>> +static ssize_t hisi_pcie_cpumask_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(dev_get_drvdata(dev));
>> +
>> + return cpumap_print_to_pagebuf(true, buf, &pcie_pmu->cpumask);
>> +}
>> +
>> +static ssize_t hisi_pcie_identifier_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(dev_get_drvdata(dev));
>> +
>> + return sysfs_emit(buf, "0x%x\n", pcie_pmu->identifier);
>> +}
>> +
>> +static ssize_t hisi_pcie_bus_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(dev_get_drvdata(dev));
>> +
>> + return sysfs_emit(buf, "0x%02x\n", PCI_BUS_NUM(pcie_pmu->bdf_min));
>> +}
>> +
>> +static void hisi_pcie_parse_data(struct hisi_pcie_pmu *pcie_pmu, u32
>> reg_off,
>
> hisi_pcie_parse_data() name is way too vague. I mean, parse what data?
>
> is there is some standard format register we use for various data types,
> then make that clear please
Seems that we only have lower_32_bits() but do not have lower_16_bits().
perhaps we could change the function name to hisi_pcie_parse_reg_value()?
>
>> + u16 *arg0, u16 *arg1)
>> +{
>> + u32 val = readl(pcie_pmu->base + reg_off);
>> +
>> + *arg0 = val & 0xffff;
>> + *arg1 = (val & 0xffff0000) >> 16;
>> +}
>> +
>> +static u32 hisi_pcie_pmu_get_offset(u32 offset, u32 idx)
>> +{
>> + return offset + HISI_PCIE_REG_STEP * idx;
>> +}
>> +
>> +static u32 hisi_pcie_pmu_readl(struct hisi_pcie_pmu *pcie_pmu, u32
>> reg_offset,
>> + u32 idx)
>> +{
>> + u32 offset = hisi_pcie_pmu_get_offset(reg_offset, idx);
>> +
>> + return readl(pcie_pmu->base + offset);
>> +}
>> +
>> +static void hisi_pcie_pmu_writel(struct hisi_pcie_pmu *pcie_pmu, u32
>> reg_offset,
>> + u32 idx, u32 val)
>> +{
>> + u32 offset = hisi_pcie_pmu_get_offset(reg_offset, idx);
>> +
>> + writel(val, pcie_pmu->base + offset);
>> +}
>> +
>> +static u64 hisi_pcie_pmu_readq(struct hisi_pcie_pmu *pcie_pmu, u32
>> reg_offset,
>> + u32 idx)
>> +{
>> + u32 offset = hisi_pcie_pmu_get_offset(reg_offset, idx);
>> +
>> + return readq(pcie_pmu->base + offset);
>> +}
>> +
>> +static void hisi_pcie_pmu_writeq(struct hisi_pcie_pmu *pcie_pmu, u32
>> reg_offset,
>> + u32 idx, u64 val)
>> +{
>> + u32 offset = hisi_pcie_pmu_get_offset(reg_offset, idx);
>> +
>> + writeq(val, pcie_pmu->base + offset);
>> +}
>> +
>> +static u64 hisi_pcie_pmu_get_event(struct perf_event *event)
>
> that function name is too vague
>
>> +{
>> + return FIELD_PREP(HISI_PCIE_EVENT_M, hisi_pcie_get_event(event)) |
>> + FIELD_PREP(HISI_PCIE_SUBEVENT_M,
>> hisi_pcie_get_subevent(event));
>> +}
>> +
>> +static u64 hisi_pcie_pmu_get_target(struct perf_event *event)
>
> same here
>
>> +{
>> + u64 port, val;
>> +
>> + port = hisi_pcie_get_port(event);
>> + if (port) {
>> + val = FIELD_PREP(HISI_PCIE_TARGET_M, port);
>> + } else {
>> + val = FIELD_PREP(HISI_PCIE_TARGET_M, hisi_pcie_get_bdf(event));
>> + val |= HISI_PCIE_TARGET_EN;
>> + }
>> +
>> + return val;
>> +}
>> +
>> +static u64 hisi_pcie_pmu_get_trigger(struct perf_event *event)
>
> and here
>
> what you really seem to be doing is getting the formatted fields for the
> register
>
>
> Having all these call-once functions seem to make life a bit more
> difficult...
>
Do you mean config all the filters in one function?, will fix it, thanks.
>> +{
>> + u64 trig_len, val;
>> +
>> + trig_len = hisi_pcie_get_trig_len(event);
>> + if (!trig_len)
>> + return 0;
>> +
>> + val = FIELD_PREP(HISI_PCIE_TRIG_M, trig_len);
>> + val |= FIELD_PREP(HISI_PCIE_TRIG_MODE_M,
>> + hisi_pcie_get_trig_mode(event));
>> + val |= HISI_PCIE_TRIG_EN;
>> +
>> + return val;
>> +}
>> +
>> +static u64 hisi_pcie_pmu_get_thr(struct perf_event *event)
>> +{
>> + u64 thr_len, val;
>> +
>> + thr_len = hisi_pcie_get_thr_len(event);
>> + if (!thr_len)
>> + return 0;
>> +
>> + val = FIELD_PREP(HISI_PCIE_THR_M, thr_len);
>> + val |= FIELD_PREP(HISI_PCIE_THR_MODE_M,
>> hisi_pcie_get_thr_mode(event));
>> + val |= HISI_PCIE_THR_EN;
>> +
>> + return val;
>> +}
>> +
>> +static void hisi_pcie_pmu_config_filter(struct perf_event *event)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + struct hw_perf_event *hwc = &event->hw;
>> + u32 idx = hwc->idx;
>> + u64 val;
>> +
>> + val = HISI_PCIE_DEFAULT_SET;
>> + val |= hisi_pcie_pmu_get_event(event);
>> + val |= hisi_pcie_pmu_get_target(event);
>> + val |= hisi_pcie_pmu_get_trigger(event);
>> + val |= hisi_pcie_pmu_get_thr(event);
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_EVENT_CTRL, idx, val);
>> +}
>> +
>> +static void hisi_pcie_pmu_clear_filter(struct perf_event *event)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + struct hw_perf_event *hwc = &event->hw;
>> +
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_EVENT_CTRL, hwc->idx,
>> + HISI_PCIE_DEFAULT_SET);
>> +}
>> +
>> +static bool hisi_pcie_pmu_valid_port(struct hisi_pcie_pmu *pcie_pmu,
>> u16 bdf)
>> +{
>> + return bdf <= pcie_pmu->bdf_max && bdf >= pcie_pmu->bdf_min;
>
> nit: it is standard to have:
>
> if (x >= min && x <= max)
>
> i.e. have min on the left
>
> 2nd nit: it is passed bdf, yet "port" is in the name
>
will fix the function, bdf means the BDF of Root Port, I'll use rp_bdf
in bext version to describe it.
>
>> +}
>> +
>> +static bool hisi_pcie_pmu_valid_requester_id(struct hisi_pcie_pmu
>> *pcie_pmu,
>> + u32 bdf)
>> +{
>> + struct pci_dev *root_port, *pdev;
>> +
>> + pdev =
>> pci_get_domain_bus_and_slot(pci_domain_nr(pcie_pmu->pdev->bus),
>> + PCI_BUS_NUM(bdf),
>> + GET_PCI_DEVFN(bdf));
>> + if (!pdev)
>> + return false;
>> +
>> + root_port = pcie_find_root_port(pdev);
>> + if (!root_port)
>> + return false;
>> +
>> + pci_dev_put(pdev);
>> + return hisi_pcie_pmu_valid_port(pcie_pmu, pci_dev_id(root_port));
>> +}
>> +
>> +static bool hisi_pcie_pmu_valid_filter(struct perf_event *event,
>> + struct hisi_pcie_pmu *pcie_pmu)
>> +{
>> + u32 subev_idx = hisi_pcie_get_subevent(event);
>> + u32 event_idx = hisi_pcie_get_event(event);
>> + u32 requester_id = hisi_pcie_get_bdf(event);
>> +
>> + if (subev_idx > HISI_PCIE_SUBEVENT_MAX ||
>> + event_idx > HISI_PCIE_EVENT_MAX) {
>> + pci_err(pcie_pmu->pdev,
>> + "Max event index and max subevent index is: %d, %d.\n",
>> + HISI_PCIE_EVENT_MAX, HISI_PCIE_SUBEVENT_MAX);
>
> if this is just going to be fed back to userspace, I don't see why we
> need a kernel log
>
> and the only caller also triggers an error message, which I doubt is needed
>
Print out the HISI_PCIE_EVENT_MAX and HISI_PCIE_SUBEVENT_MAX here may be
more convenient for users to get the right value.
If you this is redundant I'll remove it. :)
>> + return false;
>> + }
>> +
>> + if (hisi_pcie_get_thr_len(event) > HISI_PCIE_THR_MAX_VAL)
>> + return false;
>> +
>> + if (hisi_pcie_get_trig_len(event) > HISI_PCIE_TRIG_MAX_VAL)
>> + return false;
>> +
>> + if (requester_id) {
>> + if (!hisi_pcie_pmu_valid_requester_id(pcie_pmu, requester_id)) {
>> + pci_err(pcie_pmu->pdev, "Invalid requester id.\n");
>
> see previous comments
>
>> + return false;
>> + }
>> + }
>> +
>> + return true;
>> +}
>> +
>> +static bool hisi_pcie_pmu_validate_event_group(struct perf_event *event)
>> +{
>> + struct perf_event *sibling, *leader = event->group_leader;
>> + int counters = 1;
>> +
>> + if (!is_software_event(leader)) {
>> + if (leader->pmu != event->pmu)
>> + return false;
>> +
>> + if (leader != event)
>> + counters++;
>> + }
>> +
>> + for_each_sibling_event(sibling, event->group_leader) {
>> + if (is_software_event(sibling))
>> + continue;
>> +
>> + if (sibling->pmu != event->pmu)
>> + return false;
>> +
>> + counters++;
>> + }
>> +
>> + return counters <= HISI_PCIE_MAX_COUNTERS;
>> +}
>> +
>> +static int hisi_pcie_pmu_event_init(struct perf_event *event)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> +
>> + event->cpu = cpumask_first(&pcie_pmu->cpumask);
>> +
>> + if (event->attr.type != event->pmu->type)
>> + return -ENOENT;
>> +
>> + /* Sampling is not supported. */
>> + if (is_sampling_event(event) || event->attach_state &
>> PERF_ATTACH_TASK)
>> + return -EOPNOTSUPP;
>> +
>> + /* Per-task mode is not supported. */
>> + if (event->cpu < 0)
>
> cpumask_first() gives an unsigned int - this can never happen
>
>> + return -EINVAL;
>> +
>> + if (!hisi_pcie_pmu_valid_filter(event, pcie_pmu)) {
>> + pci_err(pcie_pmu->pdev, "Invalid filter!\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (!hisi_pcie_pmu_validate_event_group(event))
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static u64 hisi_pcie_pmu_process_data(struct perf_event *event, u64 val,
>
> function name too vague, as are the argument names
will fix it, thanks.
>
>> + u64 val_ext)
>> +{
>> +#define CONVERT_DW_TO_BYTE(x) (sizeof(u32) * (x))
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + u64 us_per_cycle = readl(pcie_pmu->base + HISI_PCIE_REG_FREQ);
>> + u32 idx = hisi_pcie_get_event(event);
>> +
>> + if (!val_ext)
>> + return 0;
>> +
>> + /*
>> + * The bandwidth, latency, bus utilization and buffer occupancy
>> + * are obtained by the (COMMON_COUNTER and EXT_COUNTER). And other
>> + * features are obtained by COMMON_COUNTER.
>> + */
>> + if (is_bw_event(idx)) {
>> + if (!val_ext / 1000)
>> + return 0;
>> +
>> + /* Process data to set unit of bandwidth as "Byte/ms". */
>> + return (CONVERT_DW_TO_BYTE(val)) / (val_ext / 1000);
>> + }
>> +
>> + if (is_latency_event(idx))
>> + /* Process data to set unit of latency as "us". */
>
> it's not a good programming practice to put comments after an if
> statement like this
will fix it, thanks.
>
>> + return (val * us_per_cycle) / val_ext;
>> +
>> + if (is_bus_util_event(idx))
>> + return (val * us_per_cycle) / val_ext;
>> +
>> + if (is_buf_util_event(idx))
>> + return val / (val_ext * us_per_cycle);
>> +
>> + return val;
>> +}
>> +
>> +static void hisi_pcie_pmu_read_counter(struct perf_event *event, u64
>> *cnt,
>> + u64 *cnt_ext)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + u32 idx = event->hw.idx;
>> +
>> + *cnt = hisi_pcie_pmu_readq(pcie_pmu, HISI_PCIE_CNT, idx);
>> + *cnt_ext = hisi_pcie_pmu_readq(pcie_pmu, HISI_PCIE_EXT_CNT, idx);
>> +}
>> +
>> +static void hisi_pcie_pmu_write_counter(struct perf_event *event, u64
>> val,
>> + u64 val_ext)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + u32 idx = event->hw.idx;
>> +
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_CNT, idx, val);
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_EXT_CNT, idx, val_ext);
>> +}
>> +
>> +static int hisi_pcie_pmu_get_event_idx(struct hisi_pcie_pmu *pcie_pmu)
>> +{
>> + int idx;
>> +
>> + for (idx = 0; idx < HISI_PCIE_MAX_COUNTERS; idx++) {
>> + if (!pcie_pmu->hw_events[idx])
>> + return idx;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static void hisi_pcie_pmu_read(struct perf_event *event)
>> +{
>> + struct hw_perf_event *hwc = &event->hw;
>> + struct hw_perf_event_extra *hwc_ext = &hwc->extra_reg;
>> + u64 new_cnt_ext, prev_cnt_ext;
>> + u64 new_cnt, prev_cnt, delta;
>> +
>> + hwc_ext = &hwc->extra_reg;
>> + do {
>> + prev_cnt = local64_read(&hwc->prev_count);
>> + prev_cnt_ext = hwc_ext->config;
>> + hisi_pcie_pmu_read_counter(event, &new_cnt, &new_cnt_ext);
>> + } while (local64_cmpxchg(&hwc->prev_count, prev_cnt,
>> + new_cnt) != prev_cnt);
>> +
>> + hwc_ext->config = new_cnt_ext;
>> +
>> + delta = hisi_pcie_pmu_process_data(event, new_cnt - prev_cnt,
>> + new_cnt_ext - prev_cnt_ext);
>> + local64_add(delta, &event->count);
>> +}
>> +
>> +static void hisi_pcie_pmu_set_period(struct perf_event *event)
>> +{
>> + struct hw_perf_event *hwc = &event->hw;
>> + struct hw_perf_event_extra *hwc_ext;
>> + u64 val = BIT_ULL(HISI_PCIE_COUNTER_BITS - 1);
>> +
>> + hwc_ext = &hwc->extra_reg;
>> + local64_set(&hwc->prev_count, val);
>> + hwc_ext->config = 0;
>> + hisi_pcie_pmu_write_counter(event, val, 0);
>> +}
>> +
>> +static void hisi_pcie_pmu_enable_counter(struct hisi_pcie_pmu *pcie_pmu,
>> + struct hw_perf_event *hwc)
>> +{
>> + u32 idx = hwc->idx;
>> + u64 val;
>> +
>> + val = hisi_pcie_pmu_readq(pcie_pmu, HISI_PCIE_EVENT_CTRL, idx);
>> + val |= HISI_PCIE_EVENT_EN;
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_EVENT_CTRL, idx, val);
>> +}
>> +
>> +static void hisi_pcie_pmu_disable_counter(struct hisi_pcie_pmu
>> *pcie_pmu,
>> + struct hw_perf_event *hwc)
>> +{
>> + u32 idx = hwc->idx;
>> + u64 val;
>> +
>> + val = hisi_pcie_pmu_readq(pcie_pmu, HISI_PCIE_EVENT_CTRL, idx);
>> + val &= ~HISI_PCIE_EVENT_EN;
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_EVENT_CTRL, idx, val);
>> +}
>> +
>> +static void hisi_pcie_pmu_enable_int(struct hisi_pcie_pmu *pcie_pmu,
>> + struct hw_perf_event *hwc)
>> +{
>> + u32 idx = hwc->idx;
>> +
>> + hisi_pcie_pmu_writel(pcie_pmu, HISI_PCIE_INT_MASK, idx, 0);
>> +}
>> +
>> +static void hisi_pcie_pmu_disable_int(struct hisi_pcie_pmu *pcie_pmu,
>> + struct hw_perf_event *hwc)
>> +{
>> + u32 idx = hwc->idx;
>> +
>> + hisi_pcie_pmu_writel(pcie_pmu, HISI_PCIE_INT_MASK, idx, 1);
>> +}
>> +
>> +static void hisi_pcie_pmu_reset_counter(struct hisi_pcie_pmu *pcie_pmu,
>> + struct hw_perf_event *hwc)
>> +{
>> + u32 idx = hwc->idx;
>> +
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_EVENT_CTRL, idx,
>> + HISI_PCIE_RESET_CNT);
>> + hisi_pcie_pmu_writeq(pcie_pmu, HISI_PCIE_EVENT_CTRL, idx,
>> + HISI_PCIE_DEFAULT_SET);
>> +}
>> +
>> +static void hisi_pcie_pmu_start(struct perf_event *event, int flags)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + struct hw_perf_event *hwc = &event->hw;
>> + struct hw_perf_event_extra *hwc_ext;
>> + u64 prev_cnt, prev_cnt_ext;
>> +
>> + hwc_ext = &hwc->extra_reg;
>> + if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
>> + return;
>> +
>> + WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
>> + hwc->state = 0;
>> +
>> + hisi_pcie_pmu_config_filter(event);
>> + hisi_pcie_pmu_enable_counter(pcie_pmu, hwc);
>> + hisi_pcie_pmu_enable_int(pcie_pmu, hwc);
>> + hisi_pcie_pmu_set_period(event);
>> +
>> + if (flags & PERF_EF_RELOAD) {
>> + prev_cnt = local64_read(&hwc->prev_count);
>> + prev_cnt_ext = hwc_ext->config;
>> + hisi_pcie_pmu_write_counter(event, prev_cnt, prev_cnt_ext);
>> + }
>> +
>> + perf_event_update_userpage(event);
>> +}
>> +
>> +static void hisi_pcie_pmu_stop(struct perf_event *event, int flags)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + struct hw_perf_event *hwc = &event->hw;
>> +
>> + hisi_pcie_pmu_read(event);
>
> why do this - it just reads a register? and so why not check the return
> value?
>
hisi_pcie_pmu_read() is a void function, perhaps I should use
hisi_pcie_pmu_update_counter().
>> + hisi_pcie_pmu_disable_int(pcie_pmu, hwc);
>> + hisi_pcie_pmu_disable_counter(pcie_pmu, hwc);
>> + hisi_pcie_pmu_clear_filter(event);
>> + WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
>> + hwc->state |= PERF_HES_STOPPED;
>> +
>> + if (hwc->state & PERF_HES_UPTODATE)
>> + return;
>> +
>> + hwc->state |= PERF_HES_UPTODATE;
>> +}
>> +
>> +static int hisi_pcie_pmu_add(struct perf_event *event, int flags)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + struct hw_perf_event *hwc = &event->hw;
>> + int idx;
>> +
>> + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
>> + idx = hisi_pcie_pmu_get_event_idx(pcie_pmu);
>> + if (idx < 0)
>> + return idx;
>> +
>> + hwc->idx = idx;
>> + pcie_pmu->hw_events[idx] = event;
>> +
>> + /* Reset PMC to avoid interference caused by previous statistic. */
>
> what is PMC?
PMU counter, will fix it, thanks.
>
>> + hisi_pcie_pmu_reset_counter(pcie_pmu, hwc);
>> +
>> + if (flags & PERF_EF_START)
>> + hisi_pcie_pmu_start(event, PERF_EF_RELOAD);
>> +
>> + return 0;
>> +}
>> +
>> +static void hisi_pcie_pmu_del(struct perf_event *event, int flags)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(event->pmu);
>> + struct hw_perf_event *hwc = &event->hw;
>> +
>> + hisi_pcie_pmu_stop(event, PERF_EF_UPDATE);
>> + pcie_pmu->hw_events[hwc->idx] = NULL;
>> + perf_event_update_userpage(event);
>> +}
>> +
>> +static void hisi_pcie_pmu_enable(struct pmu *pmu)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(pmu);
>> + int num;
>> +
>> + for (num = 0; num < HISI_PCIE_MAX_COUNTERS; num++) {
>> + if (pcie_pmu->hw_events[num])
>> + break;
>> + }
>> +
>> + if (num == HISI_PCIE_MAX_COUNTERS)
>> + return;
>> +
>> + writel(HISI_PCIE_GLOBAL_EN, pcie_pmu->base + HISI_PCIE_GLOBAL_CTRL);
>> +}
>> +
>> +static void hisi_pcie_pmu_disable(struct pmu *pmu)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = to_pcie_pmu(pmu);
>> +
>> + writel(HISI_PCIE_GLOBAL_NONE, pcie_pmu->base +
>> HISI_PCIE_GLOBAL_CTRL);
>> +}
>> +
>> +static irqreturn_t hisi_pcie_pmu_irq(int irq, void *data)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = data;
>> + irqreturn_t ret = IRQ_NONE;
>> + struct perf_event *event;
>> + u32 overflown;
>> + int idx;
>> +
>> + for (idx = 0; idx < HISI_PCIE_MAX_COUNTERS; idx++) {
>> + overflown = hisi_pcie_pmu_readl(pcie_pmu, HISI_PCIE_INT_STAT,
>> + idx);
>> + if (!overflown)
>> + continue;
>> +
>> + /* Clear status of interrupt. */
>> + hisi_pcie_pmu_writel(pcie_pmu, HISI_PCIE_INT_STAT, idx, 1);
>> + event = pcie_pmu->hw_events[idx];
>> + if (!event)
>> + continue;
>> +
>> + hisi_pcie_pmu_read(event);
>> + hisi_pcie_pmu_set_period(event);
>> + ret = IRQ_HANDLED;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int hisi_pcie_pmu_irq_register(struct pci_dev *pdev,
>> + struct hisi_pcie_pmu *pcie_pmu)
>> +{
>> + int irq, ret;
>> +
>> + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
>> + if (ret < 0) {
>> + pci_err(pdev, "Failed to enable MSI vectors, ret = %d!\n", ret);
>> + return ret;
>> + }
>> +
>> + irq = pci_irq_vector(pdev, 0);
>> + ret = request_irq(irq, hisi_pcie_pmu_irq, IRQF_SHARED,
>> "hisi_pcie_pmu",
>
>
> is this interrupt line really shared?
>
No, I'll fix it, thanks.
>> + pcie_pmu);
>> + if (ret) {
>> + pci_err(pdev, "Failed to register irq, ret = %d!\n", ret);
>> + pci_free_irq_vectors(pdev);
>> + return ret;
>> + }
>> +
>> + pcie_pmu->irq = irq;
>> +
>> + return 0;
>> +}
>> +
>> +static void hisi_pcie_pmu_irq_unregister(struct pci_dev *pdev,
>> + struct hisi_pcie_pmu *pcie_pmu)
>> +{
>> + free_irq(pcie_pmu->irq, pcie_pmu);
>> + pci_free_irq_vectors(pdev);
>> +}
>> +
>> +static int hisi_pcie_pmu_online_cpu(unsigned int cpu, struct
>> hlist_node *node)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = hlist_entry_safe(node,
>> + struct hisi_pcie_pmu, node);
>> +
>> + if (cpumask_empty(&pcie_pmu->cpumask)) {
>> + cpumask_set_cpu(cpu, &pcie_pmu->cpumask);
>> + WARN_ON(irq_set_affinity_hint(pcie_pmu->irq, cpumask_of(cpu)));
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int hisi_pcie_pmu_offline_cpu(unsigned int cpu, struct
>> hlist_node *node)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu = hlist_entry_safe(node,
>> + struct hisi_pcie_pmu, node);
>> + unsigned int target;
>> +
>> + if (!cpumask_test_and_clear_cpu(cpu, &pcie_pmu->cpumask))
>
> I do wonder why we even need maintain pcie_pmu->cpumask
>
> Can't we just use cpu_online_mask as appropiate instead?
>
>> + return 0;
>> +
>> + /* Choose a new CPU from all online cpus. */
>> + target = cpumask_any_but(cpu_online_mask, cpu);
>> + if (target >= nr_cpu_ids)
>> + return 0;
>> +
>> + perf_pmu_migrate_context(&pcie_pmu->pmu, cpu, target);
>> + WARN_ON(irq_set_affinity_hint(pcie_pmu->irq, cpumask_of(target)));
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Events with the "dl" suffix in their names count performance in DL
>> layer,
>> + * otherswise, events count performance in TL layer.
>> + */
>> +static struct attribute *hisi_pcie_pmu_events_attr[] = {
>> + HISI_PMU_EVENT_ATTR(bw_rx_mwr, 0x0104),
>> + HISI_PMU_EVENT_ATTR(bw_rx_mrd, 0x1005),
>> + HISI_PMU_EVENT_ATTR(bw_tx_mwr, 0x0105),
>> + HISI_PMU_EVENT_ATTR(bw_tx_mrd, 0x2004),
>> + HISI_PMU_EVENT_ATTR(lat_rx_mwr, 0x0010),
>> + HISI_PMU_EVENT_ATTR(lat_rx_mrd, 0x0210),
>> + HISI_PMU_EVENT_ATTR(lat_tx_mrd, 0x0011),
>> + HISI_PMU_EVENT_ATTR(lat_tx_cfg, 0x0111),
>> + HISI_PMU_EVENT_ATTR(bw_rx_dl, 0x0184),
>> + HISI_PMU_EVENT_ATTR(bw_tx_dl, 0x0384),
>
> it would be nice to see JSONs for these as well with full event
> descriptions
will add one latter, thanks.
>
>> + NULL
>> +};
>> +
>> +static struct attribute_group hisi_pcie_pmu_events_group = {
>> + .name = "events",
>> + .attrs = hisi_pcie_pmu_events_attr,
>> +};
>> +
>> +static struct attribute *hisi_pcie_pmu_format_attr[] = {
>> + HISI_PMU_FORMAT_ATTR(event, "config:0-7"),
>> + HISI_PMU_FORMAT_ATTR(subevent, "config:8-15"),
>> + HISI_PMU_FORMAT_ATTR(thr_len, "config1:0-3"),
>> + HISI_PMU_FORMAT_ATTR(thr_mode, "config1:4"),
>> + HISI_PMU_FORMAT_ATTR(trig_len, "config1:5-8"),
>> + HISI_PMU_FORMAT_ATTR(trig_mode, "config1:9"),
>> + HISI_PMU_FORMAT_ATTR(port, "config2:0-15"),
>> + HISI_PMU_FORMAT_ATTR(bdf, "config2:16-31"),
>> + NULL
>> +};
>> +
>> +static struct attribute_group hisi_pcie_pmu_format_group = {
>> + .name = "format",
>> + .attrs = hisi_pcie_pmu_format_attr,
>> +};
>> +
>> +static struct device_attribute hisi_pcie_pmu_bus_attr =
>> + __ATTR(bus, 0444, hisi_pcie_bus_show, NULL);
>> +
>> +static struct attribute *hisi_pcie_pmu_bus_attrs[] = {
>> + &hisi_pcie_pmu_bus_attr.attr,
>> + NULL
>> +};
>> +
>> +static struct attribute_group hisi_pcie_pmu_bus_attr_group = {
>> + .attrs = hisi_pcie_pmu_bus_attrs,
>> +};
>> +
>> +static struct device_attribute hisi_pcie_pmu_cpumask_attr =
>> + __ATTR(cpumask, 0444, hisi_pcie_cpumask_show, NULL);
>> +
>> +static struct attribute *hisi_pcie_pmu_cpumask_attrs[] = {
>> + &hisi_pcie_pmu_cpumask_attr.attr,
>> + NULL
>> +};
>> +
>> +static struct attribute_group hisi_pcie_pmu_cpumask_attr_group = {
>> + .attrs = hisi_pcie_pmu_cpumask_attrs,
>> +};
>> +
>> +static struct device_attribute hisi_pcie_pmu_identifier_attr =
>> + __ATTR(identifier, 0444, hisi_pcie_identifier_show, NULL);
>> +
>> +static struct attribute *hisi_pcie_pmu_identifier_attrs[] = {
>> + &hisi_pcie_pmu_identifier_attr.attr,
>> + NULL
>> +};
>> +
>> +static struct attribute_group hisi_pcie_pmu_identifier_attr_group = {
>> + .attrs = hisi_pcie_pmu_identifier_attrs,
>> +};
>> +
>> +static const struct attribute_group *hisi_pcie_pmu_attr_groups[] = {
>> + &hisi_pcie_pmu_events_group,
>> + &hisi_pcie_pmu_format_group,
>> + &hisi_pcie_pmu_bus_attr_group,
>> + &hisi_pcie_pmu_cpumask_attr_group,
>> + &hisi_pcie_pmu_identifier_attr_group,
>> + NULL
>> +};
>> +
>> +static int hisi_pcie_alloc_pmu(struct pci_dev *pdev,
>> + struct hisi_pcie_pmu *pcie_pmu)
>> +{
>> + u16 sicl_id, device_id;
>> + char *name;
>> +
>> + pcie_pmu->base = pci_ioremap_bar(pdev, 2);
>> + if (!pcie_pmu->base) {
>> + pci_err(pdev, "Ioremap failed for pcie_pmu resource.\n");
>> + return -ENOMEM;
>> + }
>> +
>> + hisi_pcie_parse_data(pcie_pmu, HISI_PCIE_REG_BDF,
>> &pcie_pmu->bdf_min,
>> + &pcie_pmu->bdf_max);
>> + hisi_pcie_parse_data(pcie_pmu, HISI_PCIE_REG_INFO, &device_id,
>> + &sicl_id);
>> + name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
>> + "hisi_pcie%u_%u", sicl_id, device_id);
>> + if (!name) {
>> + pci_err(pdev, "Failed to allocate name for PMU.\n");
>
> no need for that log
will fix it.
>
>> + return -ENOMEM;
>> + }
>> +
>> + pcie_pmu->pdev = pdev;
>> + pcie_pmu->identifier = readl(pcie_pmu->base +
>> HISI_PCIE_REG_VERSION);
>> + pcie_pmu->pmu = (struct pmu) {
>> + .name = name,
>> + .module = THIS_MODULE,
>> + .event_init = hisi_pcie_pmu_event_init,
>> + .pmu_enable = hisi_pcie_pmu_enable,
>> + .pmu_disable = hisi_pcie_pmu_disable,
>> + .add = hisi_pcie_pmu_add,
>> + .del = hisi_pcie_pmu_del,
>> + .start = hisi_pcie_pmu_start,
>> + .stop = hisi_pcie_pmu_stop,
>> + .read = hisi_pcie_pmu_read,
>> + .task_ctx_nr = perf_invalid_context,
>> + .attr_groups = hisi_pcie_pmu_attr_groups,
>> + .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
>> + };
>> +
>> + return 0;
>> +}
>> +
>> +static int hisi_pcie_init_pmu(struct pci_dev *pdev,
>> + struct hisi_pcie_pmu *pcie_pmu)
>> +{
>> + int ret;
>> +
>> + ret = hisi_pcie_alloc_pmu(pdev, pcie_pmu);
>> + if (ret)
>> + return ret;
>> +
>> + ret = hisi_pcie_pmu_irq_register(pdev, pcie_pmu);
>> + if (ret)
>> + goto err_set_pmu_fail;
>> +
>> + ret =
>> cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE,
>> + &pcie_pmu->node);
>> + if (ret) {
>> + pci_err(pdev, "Failed to register hotplug, ret = %d.\n", ret);
>> + goto err_irq_unregister;
>> + }
>> +
>> + ret = perf_pmu_register(&pcie_pmu->pmu, pcie_pmu->pmu.name, -1);
>> + if (ret) {
>> + pci_err(pdev, "Failed to register PCIe PMU, ret = %d.\n", ret);
>> + goto err_hotplug_unregister;
>> + }
>> +
>> + return ret;
>> +
>> +err_hotplug_unregister:
>> + cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE,
>> + &pcie_pmu->node);
>> + irq_set_affinity_hint(pcie_pmu->irq, NULL);
>> +
>> +err_irq_unregister:
>> + hisi_pcie_pmu_irq_unregister(pdev, pcie_pmu);
>> +
>> +err_set_pmu_fail:
>> + iounmap(pcie_pmu->base);
>> +
>> + return ret;
>> +}
>> +
>> +static void hisi_pcie_uninit_pmu(struct pci_dev *pdev,
>> + struct hisi_pcie_pmu *pcie_pmu)
>> +{
>> + perf_pmu_unregister(&pcie_pmu->pmu);
>> + cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE,
>> + &pcie_pmu->node);
>> + irq_set_affinity_hint(pcie_pmu->irq, NULL);
>> + hisi_pcie_pmu_irq_unregister(pdev, pcie_pmu);
>> + iounmap(pcie_pmu->base);
>> +}
>> +
>> +static int hisi_pcie_init_dev(struct pci_dev *pdev)
>> +{
>> + int ret;
>> +
>> + ret = pci_enable_device(pdev);
>> + if (ret) {
>> + pci_err(pdev, "Failed to enable pci device, ret = %d.\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = pci_request_mem_regions(pdev, "hisi_pcie_pmu");
>> + if (ret < 0) {
>> + pci_err(pdev, "Failed to request pci mem regions, ret = %d.\n",
>> + ret);
>> + pci_disable_device(pdev);
>> + return ret;
>> + }
>> +
>> + pci_set_master(pdev);
>> +
>> + return 0;
>> +}
>> +
>> +static void hisi_pcie_uninit_dev(struct pci_dev *pdev)
>> +{
>> + pci_clear_master(pdev);
>> + pci_release_mem_regions(pdev);
>> + pci_disable_device(pdev);
>> +}
>> +
>> +static int hisi_pcie_pmu_probe(struct pci_dev *pdev,
>> + const struct pci_device_id *id)
>> +{
>> + struct hisi_pcie_pmu *pcie_pmu;
>> + int ret;
>> +
>> + pcie_pmu = devm_kzalloc(&pdev->dev, sizeof(*pcie_pmu), GFP_KERNEL);
>> + if (!pcie_pmu)
>> + return -ENOMEM;
>> +
>> + ret = hisi_pcie_init_dev(pdev);
>> + if (ret)
>> + return ret;
>> +
>> + ret = hisi_pcie_init_pmu(pdev, pcie_pmu);
>> + if (ret)
>> + hisi_pcie_uninit_dev(pdev);
>> +
>> + pci_set_drvdata(pdev, pcie_pmu);
>> +
>> + return ret;
>> +}
>> +
>> +static void hisi_pcie_pmu_remove(struct pci_dev *pdev)
>> +{
>> + hisi_pcie_uninit_pmu(pdev, pci_get_drvdata(pdev));
>
> passing both pdev and pci_get_drvdata(pdev) should not be needed
>
>> + hisi_pcie_uninit_dev(pdev);
>> + pci_set_drvdata(pdev, NULL); > +}
>> +
>> +static const struct pci_device_id hisi_pcie_pmu_ids[] = {
>> + { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12d) },
>> + { 0, }
>> +};
>> +MODULE_DEVICE_TABLE(pci, hisi_pcie_pmu_ids);
>> +
>> +static struct pci_driver hisi_pcie_pmu_driver = {
>> + .name = "hisi_pcie_pmu",
>> + .id_table = hisi_pcie_pmu_ids,
>> + .probe = hisi_pcie_pmu_probe,
>> + .remove = hisi_pcie_pmu_remove,
>> +};
>> +
>> +static int __init hisi_pcie_module_init(void)
>> +{
>> + int ret;
>> +
>> + ret =
>> cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE,
>> + "AP_PERF_ARM_HISI_PCIE_PMU_ONLINE",
>> + hisi_pcie_pmu_online_cpu,
>> + hisi_pcie_pmu_offline_cpu);
>> + if (ret) {
>> + pr_err("Failed to setup PCIE PMU hotplug, ret = %d.\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = pci_register_driver(&hisi_pcie_pmu_driver);
>> + if (ret)
>> + cpuhp_remove_multi_state(
>> + CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE);
>> +
>> + return ret;
>> +}
>> +module_init(hisi_pcie_module_init);
>> +
>> +static void __exit hisi_pcie_module_exit(void)
>> +{
>> + pci_unregister_driver(&hisi_pcie_pmu_driver);
>> + cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE);
>> +}
>> +module_exit(hisi_pcie_module_exit);
>> +
>> +MODULE_DESCRIPTION("HiSilicon PCIe PMU driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Qi Liu <liuqi115@...wei.com>");
>> diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
>> index 113f51f..c17861a 100644
>> --- a/include/linux/cpuhotplug.h
>> +++ b/include/linux/cpuhotplug.h
>> @@ -174,6 +174,7 @@ enum cpuhp_state {
>> CPUHP_AP_PERF_ARM_HISI_DDRC_ONLINE,
>> CPUHP_AP_PERF_ARM_HISI_HHA_ONLINE,
>> CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
>> + CPUHP_AP_PERF_ARM_HISI_PCIE_PMU_ONLINE,
>> CPUHP_AP_PERF_ARM_L2X0_ONLINE,
>> CPUHP_AP_PERF_ARM_QCOM_L2_ONLINE,
>> CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE,
>>
>
> .
Powered by blists - more mailing lists