linux-kernel - Re: [PATCH 1/1] staging: ipu3-imgu: Move the UAPI header from include under include/uapi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f94863a5-3e6a-7f4f-afef-634f66fec10d@linux.intel.com>
Date:   Tue, 13 Apr 2021 19:03:04 +0800
From:   Bingbu Cao <bingbu.cao@...ux.intel.com>
To:     Sakari Ailus <sakari.ailus@...ux.intel.com>,
        linux-media@...r.kernel.org
Cc:     Greg KH <gregkh@...uxfoundation.org>,
        Mitali Borkar <mitaliborkar810@...il.com>,
        bingbu.cao@...el.com, tian.shu.qiu@...el.com, mchehab@...nel.org,
        linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org,
        outreachy-kernel@...glegroups.com, mitali_s@...iitr.ac.in,
        laurent.pinchart@...asonboard.com
Subject: Re: [PATCH 1/1] staging: ipu3-imgu: Move the UAPI header from include
 under include/uapi

Reviewed-by: Bingbu Cao <bingbu.cao@...el.com>

On 4/12/21 7:11 PM, Sakari Ailus wrote:
> The header defines the user space interface but may be mistaken as
> kernel-only header due to its location. Add "uapi" directory under
> driver's include directory and move the header there.
> 
> Suggested-by: Greg KH <gregkh@...uxfoundation.org>
> Signed-off-by: Sakari Ailus <sakari.ailus@...ux.intel.com>
> ---
>  Documentation/admin-guide/media/ipu3.rst      | 35 ++++++++++---------
>  .../media/v4l/pixfmt-meta-intel-ipu3.rst      |  2 +-
>  .../ipu3/include/{ => uapi}/intel-ipu3.h      |  0
>  drivers/staging/media/ipu3/ipu3-abi.h         |  2 +-
>  4 files changed, 20 insertions(+), 19 deletions(-)
>  rename drivers/staging/media/ipu3/include/{ => uapi}/intel-ipu3.h (100%)
> 
> diff --git a/Documentation/admin-guide/media/ipu3.rst b/Documentation/admin-guide/media/ipu3.rst
> index f59697c7b374..d6454f637ff4 100644
> --- a/Documentation/admin-guide/media/ipu3.rst
> +++ b/Documentation/admin-guide/media/ipu3.rst
> @@ -234,22 +234,23 @@ The IPU3 ImgU pipelines can be configured using the Media Controller, defined at
>  Running mode and firmware binary selection
>  ------------------------------------------
>  
> -ImgU works based on firmware, currently the ImgU firmware support run 2 pipes in
> -time-sharing with single input frame data. Each pipe can run at certain mode -
> -"VIDEO" or "STILL", "VIDEO" mode is commonly used for video frames capture, and
> -"STILL" is used for still frame capture. However, you can also select "VIDEO" to
> -capture still frames if you want to capture images with less system load and
> -power. For "STILL" mode, ImgU will try to use smaller BDS factor and output
> -larger bayer frame for further YUV processing than "VIDEO" mode to get high
> -quality images. Besides, "STILL" mode need XNR3 to do noise reduction, hence
> -"STILL" mode will need more power and memory bandwidth than "VIDEO" mode. TNR
> -will be enabled in "VIDEO" mode and bypassed by "STILL" mode. ImgU is running at
> -“VIDEO” mode by default, the user can use v4l2 control V4L2_CID_INTEL_IPU3_MODE
> -(currently defined in drivers/staging/media/ipu3/include/intel-ipu3.h) to query
> -and set the running mode. For user, there is no difference for buffer queueing
> -between the "VIDEO" and "STILL" mode, mandatory input and main output node
> -should be enabled and buffers need be queued, the statistics and the view-finder
> -queues are optional.
> +ImgU works based on firmware, currently the ImgU firmware support run 2 pipes
> +in time-sharing with single input frame data. Each pipe can run at certain mode
> +- "VIDEO" or "STILL", "VIDEO" mode is commonly used for video frames capture,
> +and "STILL" is used for still frame capture. However, you can also select
> +"VIDEO" to capture still frames if you want to capture images with less system
> +load and power. For "STILL" mode, ImgU will try to use smaller BDS factor and
> +output larger bayer frame for further YUV processing than "VIDEO" mode to get
> +high quality images. Besides, "STILL" mode need XNR3 to do noise reduction,
> +hence "STILL" mode will need more power and memory bandwidth than "VIDEO" mode.
> +TNR will be enabled in "VIDEO" mode and bypassed by "STILL" mode. ImgU is
> +running at “VIDEO” mode by default, the user can use v4l2 control
> +V4L2_CID_INTEL_IPU3_MODE (currently defined in
> +drivers/staging/media/ipu3/include/uapi/intel-ipu3.h) to query and set the
> +running mode. For user, there is no difference for buffer queueing between the
> +"VIDEO" and "STILL" mode, mandatory input and main output node should be
> +enabled and buffers need be queued, the statistics and the view-finder queues
> +are optional.
>  
>  The firmware binary will be selected according to current running mode, such log
>  "using binary if_to_osys_striped " or "using binary if_to_osys_primary_striped"
> @@ -586,7 +587,7 @@ preserved.
>  References
>  ==========
>  
> -.. [#f5] drivers/staging/media/ipu3/include/intel-ipu3.h
> +.. [#f5] drivers/staging/media/ipu3/include/uapi/intel-ipu3.h
>  
>  .. [#f1] https://github.com/intel/nvt
>  
> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
> index 5f33d35532ef..84d81dd7a7b5 100644
> --- a/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
> +++ b/Documentation/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.rst
> @@ -78,4 +78,4 @@ hardware and algorithm details.
>  Intel IPU3 ImgU uAPI data types
>  ===============================
>  
> -.. kernel-doc:: drivers/staging/media/ipu3/include/intel-ipu3.h
> +.. kernel-doc:: drivers/staging/media/ipu3/include/uapi/intel-ipu3.h
> diff --git a/drivers/staging/media/ipu3/include/intel-ipu3.h b/drivers/staging/media/ipu3/include/uapi/intel-ipu3.h
> similarity index 100%
> rename from drivers/staging/media/ipu3/include/intel-ipu3.h
> rename to drivers/staging/media/ipu3/include/uapi/intel-ipu3.h
> diff --git a/drivers/staging/media/ipu3/ipu3-abi.h b/drivers/staging/media/ipu3/ipu3-abi.h
> index e1185602c7fd..c76935b436d7 100644
> --- a/drivers/staging/media/ipu3/ipu3-abi.h
> +++ b/drivers/staging/media/ipu3/ipu3-abi.h
> @@ -4,7 +4,7 @@
>  #ifndef __IPU3_ABI_H
>  #define __IPU3_ABI_H
>  
> -#include "include/intel-ipu3.h"
> +#include "include/uapi/intel-ipu3.h"
>  
>  /******************* IMGU Hardware information *******************/
>  
> 

-- 
Best regards,
Bingbu Cao