lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 13 Apr 2021 16:09:48 +0200
From:   Vitaly Kuznetsov <vkuznets@...hat.com>
To:     Siddharth Chandrasekaran <sidcha@...zon.de>
Cc:     Alexander Graf <graf@...zon.com>,
        Evgeny Iakovlev <eyakovl@...zon.de>,
        Liran Alon <liran@...zon.com>,
        Ioannis Aslanidis <iaslan@...zon.de>,
        linux-hyperv@...r.kernel.org, linux-kernel@...r.kernel.org,
        kvm@...r.kernel.org, "K. Y. Srinivasan" <kys@...rosoft.com>,
        Haiyang Zhang <haiyangz@...rosoft.com>,
        Stephen Hemminger <sthemmin@...rosoft.com>,
        Wei Liu <wei.liu@...nel.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
        x86@...nel.org, "H. Peter Anvin" <hpa@...or.com>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Sean Christopherson <seanjc@...gle.com>,
        Wanpeng Li <wanpengli@...cent.com>,
        Jim Mattson <jmattson@...gle.com>,
        Joerg Roedel <joro@...tes.org>
Subject: Re: [PATCH v2 3/4] KVM: x86: kvm_hv_flush_tlb use inputs from XMM
 registers

Siddharth Chandrasekaran <sidcha@...zon.de> writes:

> Hyper-V supports the use of XMM registers to perform fast hypercalls.
> This allows guests to take advantage of the improved performance of the
> fast hypercall interface even though a hypercall may require more than
> (the current maximum of) two input registers.
>
> The XMM fast hypercall interface uses six additional XMM registers (XMM0
> to XMM5) to allow the guest to pass an input parameter block of up to
> 112 bytes. Hyper-V can also return data back to the guest in the
> remaining XMM registers that are not used by the current hypercall.
>
> Add framework to read/write to XMM registers in kvm_hv_hypercall() and
> use the additional hypercall inputs from XMM registers in
> kvm_hv_flush_tlb() when possible.
>
> Cc: Alexander Graf <graf@...zon.com>
> Co-developed-by: Evgeny Iakovlev <eyakovl@...zon.de>
> Signed-off-by: Evgeny Iakovlev <eyakovl@...zon.de>
> Signed-off-by: Siddharth Chandrasekaran <sidcha@...zon.de>
> ---
>  arch/x86/kvm/hyperv.c | 109 ++++++++++++++++++++++++++++++++++--------
>  1 file changed, 90 insertions(+), 19 deletions(-)
>
> diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
> index 8f6babd1ea0d..1f9959aba70d 100644
> --- a/arch/x86/kvm/hyperv.c
> +++ b/arch/x86/kvm/hyperv.c
> @@ -36,6 +36,7 @@
>  
>  #include "trace.h"
>  #include "irq.h"
> +#include "fpu.h"
>  
>  /* "Hv#1" signature */
>  #define HYPERV_CPUID_SIGNATURE_EAX 0x31237648
> @@ -1623,6 +1624,8 @@ static __always_inline unsigned long *sparse_set_to_vcpu_mask(
>  	return vcpu_bitmap;
>  }
>  
> +#define KVM_HV_HYPERCALL_MAX_XMM_REGISTERS  6

Nitpick: this is not KVM-specific so could probably go to arch/x86/include/asm/hyperv-tlfs.h

> +
>  struct kvm_hv_hcall {
>  	u64 param;
>  	u64 ingpa;
> @@ -1632,10 +1635,14 @@ struct kvm_hv_hcall {
>  	u16 rep_idx;
>  	bool fast;
>  	bool rep;
> +	sse128_t xmm[KVM_HV_HYPERCALL_MAX_XMM_REGISTERS];
> +	bool xmm_dirty;
>  };
>  
>  static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc, bool ex)
>  {
> +	int i, j;
> +	gpa_t gpa;
>  	struct kvm *kvm = vcpu->kvm;
>  	struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
>  	struct hv_tlb_flush_ex flush_ex;
> @@ -1649,8 +1656,15 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc, bool
>  	bool all_cpus;
>  
>  	if (!ex) {
> -		if (unlikely(kvm_read_guest(kvm, hc->ingpa, &flush, sizeof(flush))))
> -			return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +		if (hc->fast) {
> +			flush.address_space = hc->ingpa;
> +			flush.flags = hc->outgpa;
> +			flush.processor_mask = sse128_lo(hc->xmm[0]);
> +		} else {
> +			if (unlikely(kvm_read_guest(kvm, hc->ingpa,
> +						    &flush, sizeof(flush))))
> +				return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +		}
>  
>  		trace_kvm_hv_flush_tlb(flush.processor_mask,
>  				       flush.address_space, flush.flags);
> @@ -1668,9 +1682,16 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc, bool
>  		all_cpus = (flush.flags & HV_FLUSH_ALL_PROCESSORS) ||
>  			flush.processor_mask == 0;
>  	} else {
> -		if (unlikely(kvm_read_guest(kvm, hc->ingpa, &flush_ex,
> -					    sizeof(flush_ex))))
> -			return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +		if (hc->fast) {
> +			flush_ex.address_space = hc->ingpa;
> +			flush_ex.flags = hc->outgpa;
> +			memcpy(&flush_ex.hv_vp_set,
> +			       &hc->xmm[0], sizeof(hc->xmm[0]));
> +		} else {
> +			if (unlikely(kvm_read_guest(kvm, hc->ingpa, &flush_ex,
> +						    sizeof(flush_ex))))
> +				return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +		}
>  
>  		trace_kvm_hv_flush_tlb_ex(flush_ex.hv_vp_set.valid_bank_mask,
>  					  flush_ex.hv_vp_set.format,
> @@ -1681,20 +1702,29 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc, bool
>  		all_cpus = flush_ex.hv_vp_set.format !=
>  			HV_GENERIC_SET_SPARSE_4K;
>  
> -		sparse_banks_len =
> -			bitmap_weight((unsigned long *)&valid_bank_mask, 64) *
> -			sizeof(sparse_banks[0]);
> +		sparse_banks_len = bitmap_weight((unsigned long *)&valid_bank_mask, 64);
>  
>  		if (!sparse_banks_len && !all_cpus)
>  			goto ret_success;
>  
> -		if (!all_cpus &&
> -		    kvm_read_guest(kvm,
> -				   hc->ingpa + offsetof(struct hv_tlb_flush_ex,
> -							hv_vp_set.bank_contents),
> -				   sparse_banks,
> -				   sparse_banks_len))
> -			return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +		if (!all_cpus) {
> +			if (hc->fast) {
> +				if (sparse_banks_len > KVM_HV_HYPERCALL_MAX_XMM_REGISTERS - 1)
> +					return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +				for (i = 0, j = 1; i < sparse_banks_len; i += 2, j++) {

Nitpick: you don't really need 'j' here as 'j == i/2 + 1', right?

> +					sparse_banks[i + 0] = sse128_lo(hc->xmm[j]);

Using ' + 0' for identation is ... unusual :-) I'm not opposed to it
here though.

> +					sparse_banks[i + 1] = sse128_hi(hc->xmm[j]);
> +				}
> +			} else {
> +				gpa = hc->ingpa;
> +				gpa += offsetof(struct hv_tlb_flush_ex,
> +						hv_vp_set.bank_contents);

Nitpick: if splitting these into two lines is only done to fit into 80
chars then I'd the requirement is no more so we can be a bit wider.

 gpa = hc->ingpa + offsetof(...) 

> +				if (unlikely(kvm_read_guest(kvm, gpa, sparse_banks,
> +							    sparse_banks_len *
> +							    sizeof(sparse_banks[0]))))
> +					return HV_STATUS_INVALID_HYPERCALL_INPUT;
> +			}
> +		}
>  	}
>  
>  	cpumask_clear(&hv_vcpu->tlb_flush);
> @@ -1890,6 +1920,41 @@ static u16 kvm_hvcall_signal_event(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *h
>  	return HV_STATUS_SUCCESS;
>  }
>  
> +static bool is_xmm_fast_hypercall(struct kvm_hv_hcall *hc)
> +{
> +	switch (hc->code) {
> +	case HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST:
> +	case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE:
> +	case HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX:
> +	case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX:
> +		return true;
> +	}
> +
> +	return false;
> +}
> +
> +static inline void kvm_hv_hypercall_read_xmm(struct kvm_hv_hcall *hc)
> +{
> +	int reg;
> +
> +	kvm_fpu_get();
> +	for (reg = 0; reg < KVM_HV_HYPERCALL_MAX_XMM_REGISTERS; reg++)
> +		_kvm_read_sse_reg(reg, &hc->xmm[reg]);
> +	kvm_fpu_put();
> +	hc->xmm_dirty = false;
> +}
> +
> +static inline void kvm_hv_hypercall_write_xmm(struct kvm_hv_hcall *hc)
> +{
> +	int reg;
> +
> +	kvm_fpu_get();
> +	for (reg = 0; reg < KVM_HV_HYPERCALL_MAX_XMM_REGISTERS; reg++)
> +		_kvm_write_sse_reg(reg, &hc->xmm[reg]);
> +	kvm_fpu_put();
> +	hc->xmm_dirty = false;
> +}
> +
>  int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
>  {
>  	struct kvm_hv_hcall hc;
> @@ -1926,6 +1991,9 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
>  	hc.rep_idx = (hc.param >> HV_HYPERCALL_REP_START_OFFSET) & 0xfff;
>  	hc.rep = !!(hc.rep_cnt || hc.rep_idx);
>  
> +	if (hc.fast && is_xmm_fast_hypercall(&hc))
> +		kvm_hv_hypercall_read_xmm(&hc);
> +
>  	trace_kvm_hv_hypercall(hc.code, hc.fast, hc.rep_cnt, hc.rep_idx,
>  			       hc.ingpa, hc.outgpa);
>  
> @@ -1961,28 +2029,28 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
>  				kvm_hv_hypercall_complete_userspace;
>  		return 0;
>  	case HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST:
> -		if (unlikely(hc.fast || !hc.rep_cnt || hc.rep_idx)) {
> +		if (unlikely(!hc.rep_cnt || hc.rep_idx)) {
>  			ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
>  			break;
>  		}
>  		ret = kvm_hv_flush_tlb(vcpu, &hc, false);
>  		break;
>  	case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE:
> -		if (unlikely(hc.fast || hc.rep)) {
> +		if (unlikely(hc.rep)) {
>  			ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
>  			break;
>  		}
>  		ret = kvm_hv_flush_tlb(vcpu, &hc, false);
>  		break;
>  	case HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX:
> -		if (unlikely(hc.fast || !hc.rep_cnt || hc.rep_idx)) {
> +		if (unlikely(!hc.rep_cnt || hc.rep_idx)) {
>  			ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
>  			break;
>  		}
>  		ret = kvm_hv_flush_tlb(vcpu, &hc, true);
>  		break;
>  	case HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX:
> -		if (unlikely(hc.fast || hc.rep)) {
> +		if (unlikely(hc.rep)) {
>  			ret = HV_STATUS_INVALID_HYPERCALL_INPUT;
>  			break;
>  		}
> @@ -2035,6 +2103,9 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
>  		break;
>  	}
>  
> +	if (hc.xmm_dirty)
> +		kvm_hv_hypercall_write_xmm(&hc);
> +

Wei already mention that but as 'xmm_dirty' is not being used in this
patch I'd suggest we move it out too.

>  	return kvm_hv_hypercall_complete(vcpu, ret);
>  }

-- 
Vitaly

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ