[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210417195150.5fdcpxfbasp4y264@pengutronix.de>
Date: Sat, 17 Apr 2021 21:51:50 +0200
From: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
To: Clemens Gruber <clemens.gruber@...ruber.com>
Cc: linux-pwm@...r.kernel.org,
Thierry Reding <thierry.reding@...il.com>,
Sven Van Asbroeck <TheSven73@...il.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v9 1/8] pwm: pca9685: Switch to atomic API
On Thu, Apr 15, 2021 at 02:14:48PM +0200, Clemens Gruber wrote:
> The switch to the atomic API goes hand in hand with a few fixes to
> previously experienced issues:
> - The duty cycle is no longer lost after disable/enable (previously the
> OFF registers were cleared in disable and the user was required to
> call config to restore the duty cycle settings)
> - If one sets a period resulting in the same prescale register value,
> the sleep and write to the register is now skipped
> - Previously, only the full ON bit was toggled in GPIO mode (and full
> OFF cleared if set to high), which could result in both full OFF and
> full ON not being set and on=0, off=0, which is not allowed according
> to the datasheet
> - The OFF registers were reset to 0 in probe, which could lead to the
> forbidden on=0, off=0. Fixed by resetting to POR default (full OFF)
>
> Signed-off-by: Clemens Gruber <clemens.gruber@...ruber.com>
(I sent my ack to v8 before, but indeed this was the version I intended
to ack)
Acked-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists