| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <efdd8910b519dd55838570c72e3ce35e063f4a11.1619022192.git.drv@mailo.com>
Date: Wed, 21 Apr 2021 22:26:09 +0530
From: Deepak R Varma <drv@...lo.com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-media@...r.kernel.org, linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org, mh12gx2825@...il.com, drv@...lo.com
Subject: [PATCH v1 4/6] staging: media: atomisp: reformat code comment blocks
Reformat code comment blocks according to the coding style guidelines.
This resolves different checkpatch script WARNINGs around block comments.
Signed-off-by: Deepak R Varma <drv@...lo.com>
---
Changes in v1:
- implement following changes suggested by Fabio Aiuto
a. Corrected commenting style
b. Similar style implemented for other comment blocks in
the same files.
.../media/atomisp/i2c/atomisp-gc2235.c | 19 ++++----
.../atomisp/i2c/atomisp-libmsrlisthelper.c | 6 ++-
.../media/atomisp/i2c/atomisp-mt9m114.c | 46 +++++++++++--------
.../media/atomisp/i2c/atomisp-ov2680.c | 20 +++++---
4 files changed, 56 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
index 548c572d3b57..6ee6e8414f0e 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
@@ -228,7 +228,7 @@ static int gc2235_g_focal(struct v4l2_subdev *sd, s32 *val)
static int gc2235_g_fnumber(struct v4l2_subdev *sd, s32 *val)
{
- /*const f number for imx*/
+ /* const f number for imx */
*val = (GC2235_F_NUMBER_DEFAULT_NUM << 16) | GC2235_F_NUMBER_DEM;
return 0;
}
@@ -427,7 +427,8 @@ static long gc2235_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
return 0;
}
-/* This returns the exposure time being used. This should only be used
+/*
+ * This returns the exposure time being used. This should only be used
* for filling in EXIF data, not for actual image processing.
*/
static int gc2235_q_exposure(struct v4l2_subdev *sd, s32 *value)
@@ -746,11 +747,12 @@ static int startup(struct v4l2_subdev *sd)
int ret = 0;
if (is_init == 0) {
- /* force gc2235 to do a reset in res change, otherwise it
- * can not output normal after switching res. and it is not
- * necessary for first time run up after power on, for the sack
- * of performance
- */
+ /*
+ * force gc2235 to do a reset in res change, otherwise it
+ * can not output normal after switching res. and it is not
+ * necessary for first time run up after power on, for the sack
+ * of performance
+ */
power_down(sd);
power_up(sd);
gc2235_write_reg_array(client, gc2235_init_settings);
@@ -904,7 +906,8 @@ static int gc2235_s_config(struct v4l2_subdev *sd,
(struct camera_sensor_platform_data *)platform_data;
mutex_lock(&dev->input_lock);
- /* power off the module, then power on it in future
+ /*
+ * power off the module, then power on it in future
* as first power on by board may not fulfill the
* power on sequqence needed by the module
*/
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
index b93c80471f22..7a20d918a9d5 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
@@ -50,14 +50,16 @@ struct tbd_data_record_header {
static int set_msr_configuration(struct i2c_client *client, uint8_t *bufptr,
unsigned int size)
{
- /* The configuration data contains any number of sequences where
+ /*
+ * The configuration data contains any number of sequences where
* the first byte (that is, uint8_t) that marks the number of bytes
* in the sequence to follow, is indeed followed by the indicated
* number of bytes of actual data to be written to sensor.
* By convention, the first two bytes of actual data should be
* understood as an address in the sensor address space (hibyte
* followed by lobyte) where the remaining data in the sequence
- * will be written. */
+ * will be written.
+ */
u8 *ptr = bufptr;
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
index 465fc4468442..f314e5fed9cb 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
@@ -475,10 +475,12 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
if (!dev || !dev->platform_data)
return -ENODEV;
- /* Note: current modules wire only one GPIO signal (RESET#),
+ /*
+ * Note: current modules wire only one GPIO signal (RESET#),
* but the schematic wires up two to the connector. BIOS
* versions have been unfortunately inconsistent with which
- * ACPI index RESET# is on, so hit both */
+ * ACPI index RESET# is on, so hit both
+ */
if (flag) {
ret = dev->platform_data->gpio0_ctrl(sd, 0);
@@ -560,7 +562,7 @@ static int power_down(struct v4l2_subdev *sd)
if (ret)
dev_err(&client->dev, "vprog failed.\n");
- /*according to DS, 20ms is needed after power down*/
+ /* according to DS, 20ms is needed after power down */
msleep(20);
return ret;
@@ -947,7 +949,7 @@ static int mt9m114_g_focal(struct v4l2_subdev *sd, s32 *val)
static int mt9m114_g_fnumber(struct v4l2_subdev *sd, s32 *val)
{
- /*const f number for mt9m114*/
+ /* const f number for mt9m114 */
*val = (MT9M114_F_NUMBER_DEFAULT_NUM << 16) | MT9M114_F_NUMBER_DEM;
return 0;
}
@@ -1014,13 +1016,13 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
AnalogGain = exposure->gain[0];
DigitalGain = exposure->gain[1];
if (!dev->streamon) {
- /*Save the first exposure values while stream is off*/
+ /* Save the first exposure values while stream is off */
dev->first_exp = coarse_integration;
dev->first_gain = AnalogGain;
dev->first_diggain = DigitalGain;
}
- /* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) +
- ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */
+ /* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) + */
+ /* ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */
/* set frame length */
if (FLines < coarse_integration + 6)
@@ -1034,8 +1036,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
}
/* set coarse integration */
- /* 3A provide real exposure time.
- should not translate to any value here. */
+ /*
+ * 3A provide real exposure time.
+ * should not translate to any value here.
+ */
ret = mt9m114_write_reg(client, MISENSOR_16BIT,
REG_EXPO_COARSE, (u16)(coarse_integration));
if (ret) {
@@ -1044,7 +1048,7 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
}
/*
- // set analog/digital gain
+ * set analog/digital gain
switch(AnalogGain)
{
case 0:
@@ -1069,8 +1073,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
*/
if (DigitalGain >= 16 || DigitalGain <= 1)
DigitalGain = 1;
- /* AnalogGainToWrite =
- (u16)((DigitalGain << 12) | AnalogGainToWrite); */
+
+ /*
+ * AnalogGainToWrite = (u16)((DigitalGain << 12) | AnalogGainToWrite);
+ */
AnalogGainToWrite = (u16)((DigitalGain << 12) | (u16)AnalogGain);
ret = mt9m114_write_reg(client, MISENSOR_16BIT,
REG_GAIN, AnalogGainToWrite);
@@ -1095,8 +1101,10 @@ static long mt9m114_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
return 0;
}
-/* This returns the exposure time being used. This should only be used
- for filling in EXIF data, not for actual image processing. */
+/*
+ * This returns the exposure time being used. This should only be used
+ * for filling in EXIF data, not for actual image processing.
+ */
static int mt9m114_g_exposure(struct v4l2_subdev *sd, s32 *value)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -1247,7 +1255,8 @@ static int mt9m114_s_ev(struct v4l2_subdev *sd, s32 val)
s32 luma = 0x37;
int err;
- /* EV value only support -2 to 2
+ /*
+ * EV value only support -2 to 2
* 0: 0x37, 1:0x47, 2:0x57, -1:0x27, -2:0x17
*/
if (val < -2 || val > 2)
@@ -1295,9 +1304,10 @@ static int mt9m114_g_ev(struct v4l2_subdev *sd, s32 *val)
return 0;
}
-/* Fake interface
+/*
+ * Fake interface
* mt9m114 now can not support 3a_lock
-*/
+ */
static int mt9m114_s_3a_lock(struct v4l2_subdev *sd, s32 val)
{
aaalock = val;
@@ -1843,7 +1853,7 @@ static int mt9m114_probe(struct i2c_client *client)
return ret;
}
- /*TODO add format code here*/
+ /* TODO add format code here */
dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
dev->pad.flags = MEDIA_PAD_FL_SOURCE;
dev->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index c17615149f46..4571f4328b80 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -127,7 +127,7 @@ static int ov2680_g_focal(struct v4l2_subdev *sd, s32 *val)
static int ov2680_g_fnumber(struct v4l2_subdev *sd, s32 *val)
{
- /*const f number for ov2680*/
+ /* const f number for ov2680 */
*val = (OV2680_F_NUMBER_DEFAULT_NUM << 16) | OV2680_F_NUMBER_DEM;
return 0;
@@ -399,7 +399,8 @@ static long ov2680_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
return 0;
}
-/* This returns the exposure time being used. This should only be used
+/*
+ * This returns the exposure time being used. This should only be used
* for filling in EXIF data, not for actual image processing.
*/
static int ov2680_q_exposure(struct v4l2_subdev *sd, s32 *value)
@@ -728,11 +729,13 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
if (!dev || !dev->platform_data)
return -ENODEV;
- /* The OV2680 documents only one GPIO input (#XSHUTDN), but
+ /*
+ * The OV2680 documents only one GPIO input (#XSHUTDN), but
* existing integrations often wire two (reset/power_down)
* because that is the way other sensors work. There is no
* way to tell how it is wired internally, so existing
- * firmwares expose both and we drive them symmetrically. */
+ * firmwares expose both and we drive them symmetrically.
+ */
if (flag) {
ret = dev->platform_data->gpio0_ctrl(sd, 1);
usleep_range(10000, 15000);
@@ -978,7 +981,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
goto err;
}
- /*recall flip functions to avoid flip registers
+ /*
+ * recall flip functions to avoid flip registers
* were overridden by default setting
*/
if (h_flag)
@@ -988,7 +992,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
v4l2_info(client, "\n%s idx %d\n", __func__, dev->fmt_idx);
- /*ret = startup(sd);
+ /*
+ * ret = startup(sd);
* if (ret)
* dev_err(&client->dev, "ov2680 startup err\n");
*/
@@ -1097,7 +1102,8 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
(struct camera_sensor_platform_data *)platform_data;
mutex_lock(&dev->input_lock);
- /* power off the module, then power on it in future
+ /*
+ * power off the module, then power on it in future
* as first power on by board may not fulfill the
* power on sequqence needed by the module
*/
--
2.25.1
Powered by blists - more mailing lists