Message-ID: <mhng-89583eb9-2031-4afd-8ebc-aa758fe077ca@palmerdabbelt-glaptop>
Date:   Thu, 22 Apr 2021 20:30:44 -0700 (PDT)
From:   Palmer Dabbelt <palmer@...belt.com>
To:     mick@....forth.gr
CC:     linux-riscv@...ts.infradead.org,
        Paul Walmsley <paul.walmsley@...ive.com>,
        linux-kernel@...r.kernel.org, mick@....forth.gr
Subject:     Re: [PATCH v3 2/5] RISC-V: Add kexec support

On Mon, 05 Apr 2021 01:57:09 PDT (-0700), mick@....forth.gr wrote:
> This patch adds support for kexec on RISC-V. On SMP systems it depends
> on HOTPLUG_CPU in order to be able to bring up all harts after kexec.
> It also needs a recent OpenSBI version that supports the HSM extension.
> I tested it on riscv64 QEMU on both an smp and a non-smp system.
>
> v5:
>  * For now depend on MMU, further changes needed for NOMMU support
>  * Make sure stvec is aligned
>  * Cleanup some unneeded fences
>  * Verify control code's buffer size
>  * Compile kexec_relocate.S with medany and norelax
>
> v4:
>  * No functional changes, just re-based
>
> v3:
>  * Use the new smp_shutdown_nonboot_cpus() call.
>  * Move riscv_kexec_relocate to .rodata
>
> v2:
>  * Pass needed parameters as arguments to riscv_kexec_relocate
>    instead of using global variables.
>  * Use kimage_arch to hold the fdt address of the included fdt.
>  * Use SYM_* macros on kexec_relocate.S.
>  * Compatibility with STRICT_KERNEL_RWX.
>  * Compatibility with HOTPLUG_CPU for SMP
>  * Small cleanups

If you put these below a "---" then I don't have to manually remove 
them, but the best thing to do is to include the changelog as part of 
the cover letter when you have one as it's pretty tough to track 
changelogs on single patches.

>
> Signed-off-by: Nick Kossifidis <mick@....forth.gr>
> ---
>  arch/riscv/Kconfig                 |  15 +++
>  arch/riscv/include/asm/kexec.h     |  47 ++++++++
>  arch/riscv/kernel/Makefile         |   5 +
>  arch/riscv/kernel/kexec_relocate.S | 156 ++++++++++++++++++++++++
>  arch/riscv/kernel/machine_kexec.c  | 186 +++++++++++++++++++++++++++++
>  5 files changed, 409 insertions(+)
>  create mode 100644 arch/riscv/include/asm/kexec.h
>  create mode 100644 arch/riscv/kernel/kexec_relocate.S
>  create mode 100644 arch/riscv/kernel/machine_kexec.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 8ea60a0a1..3716262ef 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -389,6 +389,21 @@ config RISCV_SBI_V01
>  	help
>  	  This config allows kernel to use SBI v0.1 APIs. This will be
>  	  deprecated in future once legacy M-mode software are no longer in use.
> +
> +config KEXEC
> +	bool "Kexec system call"
> +	select KEXEC_CORE
> +	select HOTPLUG_CPU if SMP
> +	depends on MMU
> +	help
> +	  kexec is a system call that implements the ability to shutdown your
> +	  current kernel, and to start another kernel. It is like a reboot
> +	  but it is independent of the system firmware. And like a reboot
> +	  you can start any kernel with it, not just Linux.
> +
> +	  The name comes from the similarity to the exec system call.
> +
> +
>  endmenu
>
>  menu "Boot options"
> diff --git a/arch/riscv/include/asm/kexec.h b/arch/riscv/include/asm/kexec.h
> new file mode 100644
> index 000000000..efc69feb4
> --- /dev/null
> +++ b/arch/riscv/include/asm/kexec.h
> @@ -0,0 +1,47 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 FORTH-ICS/CARV
> + *  Nick Kossifidis <mick@....forth.gr>
> + */
> +
> +#ifndef _RISCV_KEXEC_H
> +#define _RISCV_KEXEC_H
> +
> +/* Maximum physical address we can use pages from */
> +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
> +
> +/* Maximum address we can reach in physical address mode */
> +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
> +
> +/* Maximum address we can use for the control code buffer */
> +#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
> +
> +/* Reserve a page for the control code buffer */
> +#define KEXEC_CONTROL_PAGE_SIZE 4096
> +
> +#define KEXEC_ARCH KEXEC_ARCH_RISCV
> +
> +static inline void
> +crash_setup_regs(struct pt_regs *newregs,
> +		 struct pt_regs *oldregs)
> +{
> +	/* Dummy implementation for now */
> +}
> +
> +
> +#define ARCH_HAS_KIMAGE_ARCH
> +
> +struct kimage_arch {
> +	unsigned long fdt_addr;
> +};
> +
> +const extern unsigned char riscv_kexec_relocate[];
> +const extern unsigned int riscv_kexec_relocate_size;
> +
> +typedef void (*riscv_kexec_do_relocate)(unsigned long first_ind_entry,
> +					unsigned long jump_addr,
> +					unsigned long fdt_addr,
> +					unsigned long hartid,
> +					unsigned long va_pa_off);
> +
> +#endif
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index 3dc0abde9..c2594018c 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -9,6 +9,10 @@ CFLAGS_REMOVE_patch.o	= $(CC_FLAGS_FTRACE)
>  CFLAGS_REMOVE_sbi.o	= $(CC_FLAGS_FTRACE)
>  endif
>
> +ifdef CONFIG_KEXEC
> +AFLAGS_kexec_relocate.o := -mcmodel=medany -mno-relax
> +endif
> +
>  extra-y += head.o
>  extra-y += vmlinux.lds
>
> @@ -54,6 +58,7 @@ obj-$(CONFIG_SMP) += cpu_ops_sbi.o
>  endif
>  obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
>  obj-$(CONFIG_KGDB)		+= kgdb.o
> +obj-${CONFIG_KEXEC}		+= kexec_relocate.o machine_kexec.o
>
>  obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
>
> diff --git a/arch/riscv/kernel/kexec_relocate.S b/arch/riscv/kernel/kexec_relocate.S
> new file mode 100644
> index 000000000..616c20771
> --- /dev/null
> +++ b/arch/riscv/kernel/kexec_relocate.S
> @@ -0,0 +1,156 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 FORTH-ICS/CARV
> + *  Nick Kossifidis <mick@....forth.gr>
> + */
> +
> +#include <asm/asm.h>	/* For RISCV_* and REG_* macros */
> +#include <asm/page.h>	/* For PAGE_SHIFT */
> +#include <linux/linkage.h> /* For SYM_* macros */
> +
> +.section ".rodata"
> +SYM_CODE_START(riscv_kexec_relocate)
> +
> +	/*
> +	 * s0: Pointer to the current entry
> +	 * s1: (const) Phys address to jump to after relocation
> +	 * s2: (const) Phys address of the FDT image
> +	 * s3: (const) The hartid of the current hart
> +	 * s4: Pointer to the destination address for the relocation
> +	 * s5: (const) Number of words per page
> +	 * s6: (const) 1, used for subtraction
> +	 * s7: (const) va_pa_offset, used when switching MMU off
> +	 * s8: (const) Physical address of the main loop
> +	 * s9: (debug) indirection page counter
> +	 * s10: (debug) entry counter
> +	 * s11: (debug) copied words counter
> +	 */
> +	mv	s0, a0
> +	mv	s1, a1
> +	mv	s2, a2
> +	mv	s3, a3
> +	mv	s4, zero
> +	li	s5, ((1 << PAGE_SHIFT) / RISCV_SZPTR)
> +	li	s6, 1
> +	mv	s7, a4
> +	mv	s8, zero
> +	mv	s9, zero
> +	mv	s10, zero
> +	mv	s11, zero
> +
> +	/* Disable / cleanup interrupts */
> +	csrw	sie, zero
> +	csrw	sip, zero
> +
> +	/*
> +	 * When we switch SATP.MODE to "Bare" we'll only
> +	 * play with physical addresses. However the first time
> +	 * we try to jump somewhere, the offset on the jump
> +	 * will be relative to pc which will still be on VA. To
> +	 * deal with this we set stvec to the physical address at
> +	 * the start of the loop below so that we jump there in
> +	 * any case.
> +	 */
> +	la	s8, 1f
> +	sub	s8, s8, s7
> +	csrw	stvec, s8
> +
> +	/* Process entries in a loop */
> +.align 2
> +1:
> +	addi	s10, s10, 1
> +	REG_L	t0, 0(s0)		/* t0 = *image->entry */
> +	addi	s0, s0, RISCV_SZPTR	/* image->entry++ */
> +
> +	/* IND_DESTINATION entry ? -> save destination address */
> +	andi	t1, t0, 0x1
> +	beqz	t1, 2f
> +	andi	s4, t0, ~0x1
> +	j	1b
> +
> +2:
> +	/* IND_INDIRECTION entry ? -> update next entry ptr (PA) */
> +	andi	t1, t0, 0x2
> +	beqz	t1, 2f
> +	andi	s0, t0, ~0x2
> +	addi	s9, s9, 1
> +	csrw	sptbr, zero
> +	jalr	zero, s8, 0
> +
> +2:
> +	/* IND_DONE entry ? -> jump to done label */
> +	andi	t1, t0, 0x4
> +	beqz	t1, 2f
> +	j	4f
> +
> +2:
> +	/*
> +	 * IND_SOURCE entry ? -> copy page word by word to the
> +	 * destination address we got from IND_DESTINATION
> +	 */
> +	andi	t1, t0, 0x8
> +	beqz	t1, 1b		/* Unknown entry type, ignore it */
> +	andi	t0, t0, ~0x8
> +	mv	t3, s5		/* i = num words per page */
> +3:	/* copy loop */
> +	REG_L	t1, (t0)	/* t1 = *src_ptr */
> +	REG_S	t1, (s4)	/* *dst_ptr = *src_ptr */
> +	addi	t0, t0, RISCV_SZPTR /* stc_ptr++ */
> +	addi	s4, s4, RISCV_SZPTR /* dst_ptr++ */
> +	sub	t3, t3, s6	/* i-- */
> +	addi	s11, s11, 1	/* c++ */
> +	beqz	t3, 1b		/* copy done ? */
> +	j	3b
> +
> +4:
> +	/* Pass the arguments to the next kernel  / Cleanup*/
> +	mv	a0, s3
> +	mv	a1, s2
> +	mv	a2, s1
> +
> +	/* Cleanup */
> +	mv	a3, zero
> +	mv	a4, zero
> +	mv	a5, zero
> +	mv	a6, zero
> +	mv	a7, zero
> +
> +	mv	s0, zero
> +	mv	s1, zero
> +	mv	s2, zero
> +	mv	s3, zero
> +	mv	s4, zero
> +	mv	s5, zero
> +	mv	s6, zero
> +	mv	s7, zero
> +	mv	s8, zero
> +	mv	s9, zero
> +	mv	s10, zero
> +	mv	s11, zero
> +
> +	mv	t0, zero
> +	mv	t1, zero
> +	mv	t2, zero
> +	mv	t3, zero
> +	mv	t4, zero
> +	mv	t5, zero
> +	mv	t6, zero
> +	csrw	sepc, zero
> +	csrw	scause, zero
> +	csrw	sscratch, zero
> +
> +	/*
> +	 * Make sure the relocated code is visible
> +	 * and jump to the new kernel
> +	 */
> +	fence.i
> +
> +	jalr	zero, a2, 0
> +
> +SYM_CODE_END(riscv_kexec_relocate)
> +riscv_kexec_relocate_end:
> +
> +	.section ".rodata"
> +SYM_DATA(riscv_kexec_relocate_size,
> +	.long riscv_kexec_relocate_end - riscv_kexec_relocate)
> +
> diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c
> new file mode 100644
> index 000000000..2ce6c3daf
> --- /dev/null
> +++ b/arch/riscv/kernel/machine_kexec.c
> @@ -0,0 +1,186 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 FORTH-ICS/CARV
> + *  Nick Kossifidis <mick@....forth.gr>
> + */
> +
> +#include <linux/kexec.h>
> +#include <asm/kexec.h>		/* For riscv_kexec_* symbol defines */
> +#include <linux/smp.h>		/* For smp_send_stop () */
> +#include <asm/cacheflush.h>	/* For local_flush_icache_all() */
> +#include <asm/barrier.h>	/* For smp_wmb() */
> +#include <asm/page.h>		/* For PAGE_MASK */
> +#include <linux/libfdt.h>	/* For fdt_check_header() */
> +#include <asm/set_memory.h>	/* For set_memory_x() */
> +#include <linux/compiler.h>	/* For unreachable() */
> +#include <linux/cpu.h>		/* For cpu_down() */
> +
> +/**
> + * kexec_image_info - Print received image details
> + */
> +static void
> +kexec_image_info(const struct kimage *image)
> +{
> +	unsigned long i;
> +
> +	pr_debug("Kexec image info:\n");
> +	pr_debug("\ttype:        %d\n", image->type);
> +	pr_debug("\tstart:       %lx\n", image->start);
> +	pr_debug("\thead:        %lx\n", image->head);
> +	pr_debug("\tnr_segments: %lu\n", image->nr_segments);
> +
> +	for (i = 0; i < image->nr_segments; i++) {
> +		pr_debug("\t    segment[%lu]: %016lx - %016lx", i,
> +			image->segment[i].mem,
> +			image->segment[i].mem + image->segment[i].memsz);
> +		pr_debug("\t\t0x%lx bytes, %lu pages\n",
> +			(unsigned long) image->segment[i].memsz,
> +			(unsigned long) image->segment[i].memsz /  PAGE_SIZE);
> +	}
> +}
> +
> +/**
> + * machine_kexec_prepare - Initialize kexec
> + *
> + * This function is called from do_kexec_load, when the user has
> + * provided us with an image to be loaded. Its goal is to validate
> + * the image and prepare the control code buffer as needed.
> + * Note that kimage_alloc_init has already been called and the
> + * control buffer has already been allocated.
> + */
> +int
> +machine_kexec_prepare(struct kimage *image)
> +{
> +	struct kimage_arch *internal = &image->arch;
> +	struct fdt_header fdt = {0};
> +	void *control_code_buffer = NULL;
> +	unsigned int control_code_buffer_sz = 0;
> +	int i = 0;
> +
> +	kexec_image_info(image);
> +
> +	if (image->type == KEXEC_TYPE_CRASH) {
> +		pr_warn("Loading a crash kernel is unsupported for now.\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Find the Flattened Device Tree and save its physical address */
> +	for (i = 0; i < image->nr_segments; i++) {
> +		if (image->segment[i].memsz <= sizeof(fdt))
> +			continue;
> +
> +		if (copy_from_user(&fdt, image->segment[i].buf, sizeof(fdt)))
> +			continue;
> +
> +		if (fdt_check_header(&fdt))
> +			continue;
> +
> +		internal->fdt_addr = (unsigned long) image->segment[i].mem;
> +		break;
> +	}
> +
> +	if (!internal->fdt_addr) {
> +		pr_err("Device tree not included in the provided image\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Copy the assembler code for relocation to the control page */
> +	control_code_buffer = page_address(image->control_code_page);
> +	control_code_buffer_sz = page_size(image->control_code_page);
> +	if (unlikely(riscv_kexec_relocate_size > control_code_buffer_sz)) {
> +		pr_err("Relocation code doesn't fit within a control page\n");
> +		return -EINVAL;
> +	}
> +	memcpy(control_code_buffer, riscv_kexec_relocate,
> +		riscv_kexec_relocate_size);
> +
> +	/* Mark the control page executable */
> +	set_memory_x((unsigned long) control_code_buffer, 1);
> +
> +	return 0;
> +}
> +
> +
> +/**
> + * machine_kexec_cleanup - Cleanup any leftovers from
> + *			   machine_kexec_prepare
> + *
> + * This function is called by kimage_free to handle any arch-specific
> + * allocations done on machine_kexec_prepare. Since we didn't do any
> + * allocations there, this is just an empty function. Note that the
> + * control buffer is freed by kimage_free.
> + */
> +void
> +machine_kexec_cleanup(struct kimage *image)
> +{
> +}
> +
> +
> +/*
> + * machine_shutdown - Prepare for a kexec reboot
> + *
> + * This function is called by kernel_kexec just before machine_kexec
> + * below. Its goal is to prepare the rest of the system (the other
> + * harts and possibly devices etc) for a kexec reboot.
> + */
> +void machine_shutdown(void)
> +{
> +	/*
> +	 * No more interrupts on this hart
> +	 * until we are back up.
> +	 */
> +	local_irq_disable();
> +
> +#if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
> +	smp_shutdown_nonboot_cpus(smp_processor_id());
> +#endif
> +}
> +
> +/**
> + * machine_crash_shutdown - Prepare to kexec after a kernel crash
> + *
> + * This function is called by crash_kexec just before machine_kexec
> + * below and its goal is similar to machine_shutdown, but in case of
> + * a kernel crash. Since we don't handle such cases yet, this function
> + * is empty.
> + */
> +void
> +machine_crash_shutdown(struct pt_regs *regs)
> +{
> +}
> +
> +/**
> + * machine_kexec - Jump to the loaded kimage
> + *
> + * This function is called by kernel_kexec which is called by the
> + * reboot system call when the reboot cmd is LINUX_REBOOT_CMD_KEXEC,
> + * or by crash_kernel which is called by the kernel's arch-specific
> + * trap handler in case of a kernel panic. It's the final stage of
> + * the kexec process where the pre-loaded kimage is ready to be
> + * executed. We assume at this point that all other harts are
> + * suspended and this hart will be the new boot hart.
> + */
> +void __noreturn
> +machine_kexec(struct kimage *image)
> +{
> +	struct kimage_arch *internal = &image->arch;
> +	unsigned long jump_addr = (unsigned long) image->start;
> +	unsigned long first_ind_entry = (unsigned long) &image->head;
> +	unsigned long this_hart_id = raw_smp_processor_id();
> +	unsigned long fdt_addr = internal->fdt_addr;
> +	void *control_code_buffer = page_address(image->control_code_page);
> +	riscv_kexec_do_relocate do_relocate = control_code_buffer;
> +
> +	pr_notice("Will call new kernel at %08lx from hart id %lx\n",
> +		  jump_addr, this_hart_id);
> +	pr_notice("FDT image at %08lx\n", fdt_addr);
> +
> +	/* Make sure the relocation code is visible to the hart */
> +	local_flush_icache_all();
> +
> +	/* Jump to the relocation code */
> +	pr_notice("Bye...\n");
> +	do_relocate(first_ind_entry, jump_addr, fdt_addr,
> +		    this_hart_id, va_pa_offset);
> +	unreachable();
> +}

Powered by blists - more mailing lists