| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aaab2b5036e4fa217fb4e660884c85ecb580afc8.camel@oss.nxp.com>
Date: Fri, 23 Apr 2021 10:13:28 +0000
From: "Mirela Rabulea (OSS)" <mirela.rabulea@....nxp.com>
To: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
Aisheng Dong <aisheng.dong@....com>,
"G.n. Zhou" <guoniu.zhou@....com>
CC: dl-linux-imx <linux-imx@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Laurentiu Palcu <laurentiu.palcu@....com>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"paul.kocialkowski@...tlin.com" <paul.kocialkowski@...tlin.com>,
"mchehab@...nel.org" <mchehab@...nel.org>,
Robert Chiras <robert.chiras@....com>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
Peng Fan <peng.fan@....com>,
"hverkuil-cisco@...all.nl" <hverkuil-cisco@...all.nl>,
Daniel Baluta <daniel.baluta@....com>,
"ezequiel@...labora.com" <ezequiel@...labora.com>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>
Subject: Re: [PATCH v10] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes
Hi Aisheng,
thanks for feedback, responses below.
On Wed, 2021-04-21 at 10:12 +0000, Aisheng Dong wrote:
> + linux-arm-kernel@...ts.infradead.org
>
> > From: Mirela Rabulea (OSS) <mirela.rabulea@....nxp.com>
> > Sent: Wednesday, April 7, 2021 1:28 AM
> >
> > Add dts for imaging subsytem, include jpeg nodes here.
> > Tested on imx8qxp only, should work on imx8qm, but it was not
> > tested.
> >
> > Signed-off-by: Mirela Rabulea <mirela.rabulea@....com>
> > ---
> > This was patch #7 in the initial patch set that added mxc-jpeg
> > driver
> >
> > Changes in v10:
> > Addressed feedback from Aisheng Dong:
> > -Add jpeg clocks in the jpeg dts nodes.
> > -Adapt to the recent split of the dts into subsystems:
> > add the imaging subsystem, and place jpeg nodes there.
> >
> > .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 89
> > +++++++++++++++++++
> > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 1 +
> > 2 files changed, 90 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > new file mode 100644
> > index 000000000000..1457d219a658
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > @@ -0,0 +1,89 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019-2021 NXP
> > + * Zhou Guoniu <guoniu.zhou@....com>
> > + */
> > +img_subsys: bus@...00000 {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x58000000 0x0 0x58000000 0x1000000>;
> > +
> > + img_ipg_clk: clock-img-ipg {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <200000000>;
> > + clock-output-names = "img_ipg_clk";
> > + };
> > +
> > + img_jpeg_dec_clk: clock-controller@...d0000 {
>
> s/clk/lpcg
Channged in v11
>
> > + compatible = "fsl,imx8qxp-lpcg";
> > + reg = <0x585d0000 0x10000>;
> > + #clock-cells = <1>;
> > + clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > + clock-indices = <IMX_LPCG_CLK_0>,
> > + <IMX_LPCG_CLK_4>;
> > + clock-output-names = "img_jpeg_dec_clk",
> > + "img_jpeg_dec_ipg_clk";
> > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
> > + };
> > +
> > + img_jpeg_enc_clk: clock-controller@...f0000 {
>
> s/clk/lpcg
Channged in v11
>
> > + compatible = "fsl,imx8qxp-lpcg";
> > + reg = <0x585f0000 0x10000>;
> > + #clock-cells = <1>;
> > + clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > + clock-indices = <IMX_LPCG_CLK_0>,
> > + <IMX_LPCG_CLK_4>;
> > + clock-output-names = "img_jpeg_enc_clk",
> > + "img_jpeg_enc_ipg_clk";
> > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
> > + };
> > +
> > + cameradev: camera {
>
> Is this node necessary?
Dropped in v11
>
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + jpegdec: jpegdec@...00000 {
> > + compatible = "nxp,imx8qxp-jpgdec";
>
> Is this compatible string upstreamed already?
Yes, it's upstreamed.
>
> > + reg = <0x58400000 0x00050000 >;
> > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&img_jpeg_dec_clk 0>,
> > + <&img_jpeg_dec_clk 1>;
>
> Is the index correct here?
Yes, per is for the lower 16 bits (15:0) of LPCG_MJPEG_COMMON_DEC_REGS,
and ipg for the upper 16-bits (31:16) of LPCG_MJPEG_COMMON_DEC_REGS.
The IMX_LPCG_CLK_4 is 16.
>
> > + clock-names = "per", "ipg";
> > + assigned-clocks = <&img_jpeg_dec_clk 0>,
> > + <&img_jpeg_dec_clk 1>;
> > + assigned-clock-rates = <200000000>;
>
> Mismatch with assigned-clocks
Aligned in v11.
>
> > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S0>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S1>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S2>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S3>;
> > + };
> > +
> > + jpegenc: jpegenc@...50000 {
> > + compatible = "nxp,imx8qxp-jpgenc";
> > + reg = <0x58450000 0x00050000 >;
> > + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&img_jpeg_enc_clk 0>,
> > + <&img_jpeg_enc_clk 1>;
>
> Ditto
>
> > + clock-names = "per", "ipg";
> > + assigned-clocks = <&img_jpeg_enc_clk 0>,
> > + <&img_jpeg_enc_clk 1>;
> > + assigned-clock-rates = <200000000>;
>
> Ditto
>
> > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S0>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S1>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S2>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S3>;
> > + };
> > + };
> > +};
>
> Regards
> Aisheng
>
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > index 1e6b4995091e..2d9589309bd0 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > @@ -258,6 +258,7 @@
> > };
> >
> > /* sorted in register address */
> > + #include "imx8-ss-img.dtsi"
> > #include "imx8-ss-adma.dtsi"
> > #include "imx8-ss-conn.dtsi"
> > #include "imx8-ss-ddr.dtsi"
> > --
> > 2.17.1
>
>
Powered by blists - more mailing lists