| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210510145429.8752-1-nm@ti.com>
Date: Mon, 10 May 2021 09:54:29 -0500
From: Nishanth Menon <nm@...com>
To: Tero Kristo <kristo@...nel.org>, <vigneshr@...com>,
<grygorii.strashko@...com>
CC: <lokeshvutla@...com>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, Nishanth Menon <nm@...com>
Subject: [PATCH] arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
Instead of using empty ranges property, lets map explicitly the address
range that is mapped onto the dma / navigator subsystems (navss/dmss).
This is also exposed via the dtbs_check with dt-schema newer than
2021.03 version by throwing out following:
arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@...000: main-navss:
{'type': 'object'} is not allowed for
{'compatible': ['simple-mfd'], '#address-cells': [[2]], .....
This has already been correctly done for J7200, however was missed for
other k3 SoCs. Fix that oversight.
Signed-off-by: Nishanth Menon <nm@...com>
---
if possible, I'd like to pick this fixup for 5.13 window..
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index a49e41021573..bb19db04a746 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -42,12 +42,12 @@ gic_its: msi-controller@...0000 {
};
};
- dmss: dmss {
+ dmss: bus@...00000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
dma-ranges;
- ranges;
+ ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
ti,sci-dev-id = <25>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 037f9776c4c8..fea8260d33a8 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -445,11 +445,11 @@ intr_main_gpio: interrupt-controller@...000 {
ti,interrupt-ranges = <0 392 32>;
};
- main-navss {
+ main_navss: bus@...00000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
dma-coherent;
dma-ranges;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 0388c02c2203..f5b8ef2f5f77 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -116,11 +116,11 @@ adc {
};
};
- mcu-navss {
+ mcu_navss: bus@...80000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 512371e36a30..b2d25af872e2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -88,11 +88,11 @@ main_gpio_intr: interrupt-controller@...000 {
ti,interrupt-ranges = <8 392 56>;
};
- main-navss {
+ main_navss: bus@...00000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
dma-coherent;
dma-ranges;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index ad12a5c9f209..172629fa3c7c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -250,11 +250,11 @@ adc {
};
};
- mcu-navss {
+ mcu_navss: bus@...80000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;
--
2.31.0
Powered by blists - more mailing lists