linux-kernel - Re: [bug report] media: allegro: possible NULL pointer dereference.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210511072834.GC17882@pengutronix.de>
Date:   Tue, 11 May 2021 09:28:34 +0200
From:   Michael Tretter <m.tretter@...gutronix.de>
To:     Yuri Savinykh <s02190703@....cs.msu.ru>
Cc:     Pengutronix Kernel Team <kernel@...gutronix.de>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
        ldv-project@...uxtesting.org
Subject: Re: [bug report] media: allegro: possible NULL pointer dereference.

Hello Yuri,

On Sat, 08 May 2021 19:04:55 +0300, Yuri Savinykh wrote:
> At the moment of enabling irq handling:
> 
> 3166     ret = devm_request_threaded_irq(&pdev->dev, irq,
> 3167                     allegro_hardirq,
> 3168                     allegro_irq_thread,
> 3169                     IRQF_SHARED, dev_name(&pdev->dev), dev);
> 
> there is still uninitialized field mbox_status of struct allegro_dev *dev.
> If an interrupt occurs in the interval between the installation of the
> interrupt handler and the initialization of this field, NULL pointer
> dereference happens.
> 
> This field is dereferenced in the handler function without any check:
> 
> 1801 static irqreturn_t allegro_irq_thread(int irq, void *data)
> 1802 {
> 1803     struct allegro_dev *dev = data;
> 1804
> 1805     allegro_mbox_notify(dev->mbox_status);
> 
> 
> and then:
> 
> 752 static void allegro_mbox_notify(struct allegro_mbox *mbox)
> 753 {
> 754     struct allegro_dev *dev = mbox->dev;
> 
> The initialization of the mbox_status field happens asynchronously in
> allegro_fw_callback() via allegro_mcu_hw_init(). 
> 
> Is it guaranteed that an interrupt does not occur in this interval?
> If it is not, is it better to move interrupt handler installation
> after initialization of this field has been completed?

Thanks for the report. The interrupt is triggered by the firmware, which is
only loaded in allegro_fw_callback(), and is enabled only after the
initialization of mbox_status in allegro_mcu_hw_init():

3507	allegro_mcu_enable_interrupts(dev)

The interrupt handler is installed in probe(), because that's where all the
platform information is retrieved. Unfortunately, at that time, the driver is
not able to setup the mailboxes, because the mailbox configuration depends on
the firmware and is only known in allegro_fw_callback().

It might be interesting to tie the interrupt more closely to the mailboxes,
because it is actually only used to notify the driver about mails in the
mailbox, but that's something I have not yet considered worth the effort.

Michael