lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <67cc87c4-2ad8-04ab-e583-0b544bcadbce@ti.com>
Date:   Tue, 11 May 2021 20:39:31 +0530
From:   Vignesh Raghavendra <vigneshr@...com>
To:     Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
        <grygorii.strashko@...com>
CC:     <lokeshvutla@...com>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] arm64: dts: ti: k3-am65|j721e|am64: Map the dma /
 navigator subsystem via explicit ranges



On 5/10/21 8:24 PM, Nishanth Menon wrote:
> Instead of using empty ranges property, lets map explicitly the address
> range that is mapped onto the dma / navigator subsystems (navss/dmss).
> 
> This is also exposed via the dtbs_check with dt-schema newer than
> 2021.03 version by throwing out following:
> arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@...000: main-navss:
> {'type': 'object'} is not allowed for
> {'compatible': ['simple-mfd'], '#address-cells': [[2]], .....
> 
> This has already been correctly done for J7200, however was missed for
> other k3 SoCs. Fix that oversight.
> 
> Signed-off-by: Nishanth Menon <nm@...com>
> ---
> 

Acked-by: Vignesh Raghavendra <vigneshr@...com>

> if possible, I'd like to pick this fixup for 5.13 window..
> 
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi        | 4 ++--
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi        | 4 ++--
>  arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi         | 4 ++--
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi       | 4 ++--
>  arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++--
>  5 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index a49e41021573..bb19db04a746 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -42,12 +42,12 @@ gic_its: msi-controller@...0000 {
>  		};
>  	};
>  
> -	dmss: dmss {
> +	dmss: bus@...00000 {
>  		compatible = "simple-mfd";
>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		dma-ranges;
> -		ranges;
> +		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
>  
>  		ti,sci-dev-id = <25>;
>  
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index 037f9776c4c8..fea8260d33a8 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -445,11 +445,11 @@ intr_main_gpio: interrupt-controller@...000 {
>  		ti,interrupt-ranges = <0 392 32>;
>  	};
>  
> -	main-navss {
> +	main_navss: bus@...00000 {
>  		compatible = "simple-mfd";
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> -		ranges;
> +		ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
>  		dma-coherent;
>  		dma-ranges;
>  
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> index 0388c02c2203..f5b8ef2f5f77 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> @@ -116,11 +116,11 @@ adc {
>  		};
>  	};
>  
> -	mcu-navss {
> +	mcu_navss: bus@...80000 {
>  		compatible = "simple-mfd";
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> -		ranges;
> +		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
>  		dma-coherent;
>  		dma-ranges;
>  
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index 512371e36a30..b2d25af872e2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -88,11 +88,11 @@ main_gpio_intr: interrupt-controller@...000 {
>  		ti,interrupt-ranges = <8 392 56>;
>  	};
>  
> -	main-navss {
> +	main_navss: bus@...00000 {
>  		compatible = "simple-mfd";
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> -		ranges;
> +		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
>  		dma-coherent;
>  		dma-ranges;
>  
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> index ad12a5c9f209..172629fa3c7c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -250,11 +250,11 @@ adc {
>  		};
>  	};
>  
> -	mcu-navss {
> +	mcu_navss: bus@...80000 {
>  		compatible = "simple-mfd";
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> -		ranges;
> +		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
>  		dma-coherent;
>  		dma-ranges;
>  
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ