[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1620813392-30933-1-git-send-email-michal.vokac@ysoft.com>
Date: Wed, 12 May 2021 11:56:32 +0200
From: Michal Vokáč <michal.vokac@...ft.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
linux-kernel@...r.kernel.org,
Michal Vokáč <michal.vokac@...ft.com>,
stable@...r.kernel.org
Subject: [PATCH RESEND] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
The FEC does not have a PHY so it should not have a phy-handle. It is
connected to the switch at RGMII level so we need a fixed-link sub-node
on both ends.
This was not a problem until the qca8k.c driver was converted to PHYLINK
by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
PHYLIB"). That commit revealed the FEC configuration was not correct.
Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Cc: stable@...r.kernel.org
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 111d4d331f98..686dab57a1e4 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -121,9 +121,13 @@
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
- phy-handle = <ðphy0>;
status = "okay";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
mdio {
#address-cells = <1>;
#size-cells = <0>;
--
2.1.4
Powered by blists - more mailing lists