| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_Jsq+Ft0V8d_3GJ6cgb2g5uocKL-Xn5WUsfPbn+mFmWHDhuw@mail.gmail.com>
Date: Fri, 21 May 2021 11:30:35 -0500
From: Rob Herring <robh@...nel.org>
To: Grygorii Strashko <grygorii.strashko@...com>
Cc: Aswath Govindraju <a-govindraju@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Keerthy <j-keerthy@...com>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] dt-bindings: gpio: gpio-davinci: Convert to json-schema
On Fri, May 21, 2021 at 11:06 AM Grygorii Strashko
<grygorii.strashko@...com> wrote:
>
> Hi Rob,
>
> On 21/05/2021 15:56, Rob Herring wrote:
> > On Fri, May 21, 2021 at 3:32 AM Grygorii Strashko
> > <grygorii.strashko@...com> wrote:
> >>
> >> Hi Rob, All
> >>
> >> On 18/05/2021 01:15, Rob Herring wrote:
> >>> On Tue, May 11, 2021 at 02:31:20PM +0530, Aswath Govindraju wrote:
> >>>> Convert gpio-davinci dt-binding documentation from txt to yaml format.
> >>>>
> >>>> Signed-off-by: Aswath Govindraju <a-govindraju@...com>
> >>>> ---
> >>>> .../devicetree/bindings/gpio/gpio-davinci.txt | 167 ---------------
> >>>> .../bindings/gpio/gpio-davinci.yaml | 193 ++++++++++++++++++
> >>>> MAINTAINERS | 2 +-
> >>>> 3 files changed, 194 insertions(+), 168 deletions(-)
> >>>> delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> >>>> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> >>>> deleted file mode 100644
> >>>> index 696ea46227d1..000000000000
> >>>> --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> >>>> +++ /dev/null
> >>>> @@ -1,167 +0,0 @@
> >>>> -Davinci/Keystone GPIO controller bindings
> >>>> -
> >>>> -Required Properties:
> >>>> -- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
> >>>> - "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
> >>>> - 66AK2E SoCs
> >>>> - "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
> >>>> - "ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
> >>>> - "ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
> >>>> - "ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs
> >>>> -
> >>
> >> [...]
> >>
> >>>> -};
> >>>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
> >>>> new file mode 100644
> >>>> index 000000000000..1e16172669c7
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
> >>>> @@ -0,0 +1,193 @@
> >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>>> +%YAML 1.2
> >>>> +---
> >>>> +$id: http://devicetree.org/schemas/gpio/gpio-davinci.yaml#
> >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>>> +
> >>>> +title: GPIO controller for Davinci and keystone devices
> >>>> +
> >>>> +maintainers:
> >>>> + - Keerthy <j-keerthy@...com>
> >>>> +
> >>>> +properties:
> >>>> + compatible:
> >>>> + oneOf:
> >>>> + - items:
> >>>> + - enum:
> >>>> + - ti,k2g-gpio
> >>>> + - ti,am654-gpio
> >>>> + - ti,j721e-gpio
> >>>> + - ti,am64-gpio
> >>>> + - const: ti,keystone-gpio
> >>>> +
> >>>> + - items:
> >>>> + - const: ti,dm6441-gpio
> >>>> + - items:
> >>>> + - const: ti,keystone-gpio
> >>>
> >>> These 2 can be expressed as an 'enum'.
> >>>
> >>>> +
> >>>> + reg:
> >>>> + maxItems: 1
> >>>> + description:
> >>>> + Physical base address of the controller and the size of memory mapped registers.
> >>>
> >>> Drop. That's every 'reg' property.
> >>>
> >>>> +
> >>>> + gpio-controller: true
> >>>> +
> >>>> + gpio-ranges: true
> >>>> +
> >>>> + gpio-line-names:
> >>>> + description: strings describing the names of each gpio line.
> >>>
> >>> Any constraints like min/max number of lines?
> >>>
> >>>> +
> >>>> + "#gpio-cells":
> >>>> + const: 2
> >>>> + description:
> >>>> + first cell is the pin number and second cell is used to specify optional parameters (unused).
> >>>> +
> >>>> + interrupts:
> >>>> + description:
> >>>> + Array of GPIO interrupt number. Only banked or unbanked IRQs are supported at a time.
> >>>
> >>> Needs constraints. How many items and what are they?
> >>>
> >>>> +
> >>>> + ti,ngpio:
> >>>> + $ref: /schemas/types.yaml#/definitions/uint32
> >>>> + description: The number of GPIO pins supported consecutively.
> >>>> + minimum: 1
> >>>> +
> >>>> + ti,davinci-gpio-unbanked:
> >>>> + $ref: /schemas/types.yaml#/definitions/uint32
> >>>> + description: The number of GPIOs that have an individual interrupt line to processor.
> >>>> + minimum: 0
> >>>> +
> >>>> + clocks:
> >>>> + maxItems: 1
> >>>> + description:
> >>>> + clock-specifier to represent input to the GPIO controller.
> >>>
> >>> Drop description.
> >>>
> >>>> +
> >>>> + clock-names:
> >>>> + const: gpio
> >>>> +
> >>>> + interrupt-controller: true
> >>>> +
> >>>> + power-domains:
> >>>> + maxItems: 1
> >>>> + description:
> >>>> + Phandle to the power domain provider node.
> >>>
> >>> Drop.
> >>>
> >>>> +
> >>>> + "#interrupt-cells":
> >>>> + const: 2
> >>>> +
> >>>> +patternProperties:
> >>>> + "-hog$":
> >>>> + type: object
> >>>> + properties:
> >>>> + gpios: true
> >>>> + gpio-hog: true
> >>>> + input: true
> >>>> + output-high: true
> >>>> + output-low: true
> >>>> + line-name: true
> >>>> +
> >>>> + required:
> >>>> + - gpio-hog
> >>>> + - gpios
> >>
> >> I see that gpio-hog.yaml dtschema has been added.
> >> Can it be reused here and how?
> >
> > It's applied to any node containing 'gpio-hog' property, so all you need is:
> >
> > required:
> > - gpio-hog
> >
> Thanks for you comments. But I'd like to clarify the Hog child node definition - will work as below?
Yes, but...
> patternProperties:
> "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
> type: object
>
> properties:
> gpio-hog: true
Don't need this.
>
> required:
> - gpio-hog
>
> In general, patternProperties duplicates $nodename in gpio-hog dtschema.
I'd hope you could be a bit stricter here and only support one form.
Rob
Powered by blists - more mailing lists