lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3f76d6cc-df32-6bf3-9971-4ca8f0ee8169@roeck-us.net>
Date:   Sun, 23 May 2021 21:03:20 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Sai Prakash Ranjan <saiprakash.ranjan@...eaurora.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Douglas Anderson <dianders@...omium.org>,
        Wim Van Sebroeck <wim@...ux-watchdog.org>,
        linux-watchdog@...r.kernel.org, Stephen Boyd <swboyd@...omium.org>,
        Matthias Kaehlcke <mka@...omium.org>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, Guenter Roeck <groeck7@...il.com>
Subject: Re: [PATCH] watchdog: qcom: Move suspend/resume to
 suspend_late/resume_early

On 5/23/21 7:38 PM, Sai Prakash Ranjan wrote:
> On 2021-04-20 11:13, Sai Prakash Ranjan wrote:
>> Hi Guenter,
>>
>> On 2021-03-11 01:53, Guenter Roeck wrote:
>>> On Thu, Mar 11, 2021 at 01:50:04AM +0530, Sai Prakash Ranjan wrote:
>>>> During suspend/resume usecases and tests, it is common to see issues
>>>> such as lockups either in suspend path or resume path because of the
>>>> bugs in the corresponding device driver pm handling code. In such cases,
>>>> it is important that watchdog is active to make sure that we either
>>>> receive a watchdog pretimeout notification or a bite causing reset
>>>> instead of a hang causing us to hard reset the machine.
>>>>
>>>> There are good reasons as to why we need this because:
>>>>
>>>> * We can have a watchdog pretimeout governor set to panic in which
>>>>   case we can have a backtrace which would help identify the issue
>>>>   with the particular driver and cause a normal reboot.
>>>>
>>>> * Even in case where there is no pretimeout support, a watchdog
>>>>   bite is still useful because some firmware has debug support to dump
>>>>   CPU core context on watchdog bite for post-mortem analysis.
>>>>
>>>> * One more usecase which comes to mind is of warm reboot. In case we
>>>>   hard reset the target, a cold reboot could be induced resulting in
>>>>   lose of ddr contents thereby losing all the debug info.
>>>>
>>>> Currently, the watchdog pm callback just invokes the usual suspend
>>>> and resume callback which do not have any special ordering in the
>>>> sense that a watchdog can be suspended before the buggy device driver
>>>> suspend callback and watchdog resume can happen after the buggy device
>>>> driver resume callback. This would mean that the watchdog will not be
>>>> active when the buggy driver cause the lockups thereby hanging the
>>>> system. So to make sure this doesn't happen, move the watchdog pm to
>>>> use late/early system pm callbacks which will ensure that the watchdog
>>>> is suspended late and resumed early so that it can catch such issues.
>>>>
>>>> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@...eaurora.org>
>>>
>>> Reviewed-by: Guenter Roeck <linux@...ck-us.net>
>>>
>>
>> Gentle Ping. I don't see this in linux-next or linux-watchdog, please let
>> me know if anything is pending from my side.
>>
> 
> Gentle Ping !!
> 

It is my watchdog-next branch. At some point Wim will hopefully pick it up.

Guenter

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ