| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210526094609.14068-2-steven_lee@aspeedtech.com>
Date: Wed, 26 May 2021 17:46:05 +0800
From: Steven Lee <steven_lee@...eedtech.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@...ts.ozlabs.org>,
open list <linux-kernel@...r.kernel.org>
CC: <steven_lee@...eedtech.com>, <Hongweiz@....com>,
<ryan_chen@...eedtech.com>, <billy_tsai@...eedtech.com>
Subject: [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
SGPIO bindings should be converted as yaml format.
In addition to the file conversion, a new property max-ngpios is
added in the yaml file as well.
The new property is required by the enhanced sgpio driver for
making the configuration of the max number of gpio pins more flexible.
Signed-off-by: Steven Lee <steven_lee@...eedtech.com>
---
.../bindings/gpio/aspeed,sgpio.yaml | 91 +++++++++++++++++++
.../devicetree/bindings/gpio/sgpio-aspeed.txt | 46 ----------
2 files changed, 91 insertions(+), 46 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
new file mode 100644
index 000000000000..8b8588a29685
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sgpio-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SGPIO controller
+
+maintainers:
+ - Andrew Jeffery <andrew@...id.au>
+
+description:
+ This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
+ AST2600 have two sgpio master one with 128 pins another one with 80 pins,
+ AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
+ GPIO pins can be programmed to support the following options
+ - Support interrupt option for each input port and various interrupt
+ sensitivity option (level-high, level-low, edge-high, edge-low)
+ - Support reset tolerance option for each output port
+ - Directly connected to APB bus and its shift clock is from APB bus clock
+ divided by a programmable value.
+ - Co-work with external signal-chained TTL components (74LV165/74LV595)
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-sgpiom
+ - aspeed,ast2500-sgpiom
+ - aspeed,ast2600-sgpiom
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ clocks:
+ maxItems: 1
+
+ ngpios:
+ minimum: 0
+ maximum: 128
+
+ max-ngpios:
+ description:
+ represents the number of actual hardware-supported GPIOs (ie,
+ slots within the clocked serial GPIO data). Since each HW GPIO is both an
+ input and an output, we provide max_ngpios * 2 lines on our gpiochip
+ device. We also use it to define the split between the inputs and
+ outputs; the inputs start at line 0, the outputs start at max_ngpios.
+ minimum: 0
+ maximum: 128
+
+ bus-frequency: true
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - interrupt-controller
+ - ngpios
+ - max-ngpios
+ - clocks
+ - bus-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ sgpio: sgpio@...80200 {
+ #gpio-cells = <2>;
+ compatible = "aspeed,ast2500-sgpiom";
+ gpio-controller;
+ interrupts = <40>;
+ reg = <0x1e780200 0x0100>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ interrupt-controller;
+ ngpios = <8>;
+ max-ngpios = <80>;
+ bus-frequency = <12000000>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
deleted file mode 100644
index be329ea4794f..000000000000
--- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Aspeed SGPIO controller Device Tree Bindings
---------------------------------------------
-
-This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
-featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
-support the following options:
-- Support interrupt option for each input port and various interrupt
- sensitivity option (level-high, level-low, edge-high, edge-low)
-- Support reset tolerance option for each output port
-- Directly connected to APB bus and its shift clock is from APB bus clock
- divided by a programmable value.
-- Co-work with external signal-chained TTL components (74LV165/74LV595)
-
-Required properties:
-
-- compatible : Should be one of
- "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio"
-- #gpio-cells : Should be 2, see gpio.txt
-- reg : Address and length of the register set for the device
-- gpio-controller : Marks the device node as a GPIO controller
-- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
-- interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
- 2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
- output. Up to 80 pins, must be a multiple of 8.
-- clocks : A phandle to the APB clock for SGPM clock division
-- bus-frequency : SGPM CLK frequency
-
-The sgpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
- Example:
- sgpio: sgpio@...80200 {
- #gpio-cells = <2>;
- compatible = "aspeed,ast2500-sgpio";
- gpio-controller;
- interrupts = <40>;
- reg = <0x1e780200 0x0100>;
- clocks = <&syscon ASPEED_CLK_APB>;
- interrupt-controller;
- ngpios = <8>;
- bus-frequency = <12000000>;
- };
--
2.17.1
Powered by blists - more mailing lists