linux-kernel - [PATCH v1 2/4] ARM: dts: aspeed-g6: Add SGPIO node.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210526094609.14068-3-steven_lee@aspeedtech.com>
Date:   Wed, 26 May 2021 17:46:06 +0800
From:   Steven Lee <steven_lee@...eedtech.com>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Rob Herring <robh+dt@...nel.org>,
        Joel Stanley <joel@....id.au>,
        Andrew Jeffery <andrew@...id.au>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-aspeed@...ts.ozlabs.org>,
        open list <linux-kernel@...r.kernel.org>
CC:     <steven_lee@...eedtech.com>, <Hongweiz@....com>,
        <ryan_chen@...eedtech.com>, <billy_tsai@...eedtech.com>
Subject: [PATCH v1 2/4] ARM: dts: aspeed-g6: Add SGPIO node.

AST2600 supports 2 SGPIO master interfaces one with 128 pins another one
with 80 pins.

Signed-off-by: Steven Lee <steven_lee@...eedtech.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index f96607b7b4e2..556ce9535c22 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -377,6 +377,38 @@
 				#interrupt-cells = <2>;
 			};
 
+			sgpiom0: sgpiom@...80500 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780500 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				max-ngpios = <128>;
+				ngpios = <128>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm1_default>;
+				status = "disabled";
+			};
+
+			sgpiom1: sgpiom@...80600 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780600 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				max-ngpios = <80>;
+				ngpios = <80>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm2_default>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@...80800 {
 				#gpio-cells = <2>;
 				gpio-controller;
-- 
2.17.1