| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210602120329.2444672-5-j.neuschaefer@gmx.net>
Date: Wed, 2 Jun 2021 14:03:25 +0200
From: Jonathan Neuschäfer <j.neuschaefer@....net>
To: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>, openbmc@...ts.ozlabs.org,
Tomer Maimon <tmaimon77@...il.com>,
Joel Stanley <joel@....id.au>, linux-kernel@...r.kernel.org,
Jonathan Neuschäfer <j.neuschaefer@....net>
Subject: [PATCH 4/8] dt-bindings: pinctrl: Add Nuvoton WPCM450
This binding is heavily based on the one for NPCM7xx, because the
hardware is similar. One notable difference is that there are no
sub-nodes for GPIO banks, because the GPIO registers are arranged
differently.
Certain pins support blink patterns in hardware. This is currently not
modelled in the DT binding.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@....net>
---
.../pinctrl/nuvoton,wpcm450-pinctrl.yaml | 142 ++++++++++++++++++
1 file changed, 142 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
new file mode 100644
index 0000000000000..0664fe2b90db6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 pin control and GPIO
+
+maintainers:
+ - Jonathan Neuschäfer <j.neuschaefer@....net>
+
+properties:
+ compatible:
+ const: "nuvoton,wpcm450-pinctrl"
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts: true
+
+patternProperties:
+ # There are two kinds of subnodes:
+ # 1. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
+ # 2. a pinctrl node configures properties of a single pin
+ "^.*$":
+ if:
+ type: object
+ then:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+ properties:
+ groups:
+ description:
+ One or more groups of pins to mux to a certain function
+ minItems: 1
+ items:
+ enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+ hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
+ clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
+ fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
+ fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+ pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
+ function:
+ description:
+ The function that a group of pins is muxed to
+ enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+ hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
+ dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
+ gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
+ fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
+ pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
+ hg2, hg3, hg4, hg5, hg6, hg7 ]
+
+ pins:
+ description:
+ A list of pins to configure in certain ways, such as enabling
+ debouncing
+ minItems: 1
+ items:
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, gpio28,
+ gpio29, gpio30, gpio31, gpio32, gpio33, gpio34, gpio35,
+ gpio36, gpio37, gpio38, gpio39, gpio40, gpio41, gpio42,
+ gpio43, gpio44, gpio45, gpio46, gpio47, gpio48, gpio49,
+ gpio50, gpio51, gpio52, gpio53, gpio54, gpio55, gpio56,
+ gpio57, gpio58, gpio59, gpio60, gpio61, gpio62, gpio63,
+ gpio64, gpio65, gpio66, gpio67, gpio68, gpio69, gpio70,
+ gpio71, gpio72, gpio73, gpio74, gpio75, gpio76, gpio77,
+ gpio78, gpio79, gpio80, gpio81, gpio82, gpio83, gpio84,
+ gpio85, gpio86, gpio87, gpio88, gpio89, gpio90, gpio91,
+ gpio92, gpio93, gpio94, gpio95, gpio96, gpio97, gpio98,
+ gpio99, gpio100, gpio101, gpio102, gpio103, gpio104,
+ gpio105, gpio106, gpio107, gpio108, gpio109, gpio110,
+ gpio111, gpio112, gpio113, gpio114, gpio115, gpio116,
+ gpio117, gpio118, gpio119, gpio120, gpio121, gpio122,
+ gpio123, gpio124, gpio125, gpio126, gpio127 ]
+
+ input-debounce: true
+ phandle: true
+
+ dependencies:
+ groups: [ function ]
+ function: [ groups ]
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ pinctrl: pinctrl@...03000 {
+ compatible = "nuvoton,wpcm450-pinctrl";
+ reg = <0xb8003000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH
+ 3 IRQ_TYPE_LEVEL_HIGH
+ 4 IRQ_TYPE_LEVEL_HIGH
+ 5 IRQ_TYPE_LEVEL_HIGH>;
+ rmii2 {
+ groups = "rmii2";
+ function = "rmii2";
+ };
+
+ pinctrl_uid: uid {
+ pins = "gpio14";
+ input-debounce = <1>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uid>;
+
+ uid {
+ label = "UID";
+ linux,code = <102>;
+ gpios = <&pinctrl 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.30.2
Powered by blists - more mailing lists