linux-kernel - Re: [PATCH] ARM: dts: stm32: set stm32mp157c-odyssey DCMI pins

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <fcee4f30-446e-f4da-6d95-c9223cf82981@pengutronix.de>
Date:   Thu, 3 Jun 2021 16:26:59 +0200
From:   Ahmad Fatoum <a.fatoum@...gutronix.de>
To:     Grzegorz Szymaszek <gszymaszek@...rt.pl>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Marcin Sloniewski <marcin.sloniewski@...il.com>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com
Subject: Re: [PATCH] ARM: dts: stm32: set stm32mp157c-odyssey DCMI pins

Hello Grzegorz,

On 03.06.21 16:23, Grzegorz Szymaszek wrote:
> The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
> stm32mp15-pinctrl.dtsi contains one pin state definition for the DCMI
> interface, dcmi-0, AKA phandle dcmi_pins_a. This definition is
> incompatible with the pins used on the Odyssey board, where:
> - there are 8 data pins instead of 12,
> - DCMI_HSYNC is available at PA4 instead of PH8,
> - DCMI_D0 is at PC6 instead of PH9,
> - DCMI_D3 is at PE1 instead of PH12,
> - DCMI_D4 is at PE11 instead of PH14,
> - DCMI_D5 is at PD3 instead of PI4,
> - DCMI_D6 is at PE13 instead of PB8,
> - DCMI_D7 is at PB9 instead of PE6.
> 
> Override the dcmi_pins_a definition (as well as dcmi_sleep_pins_a) in
> the Odyssey device tree.

Rather define a new pinctrl group (e.g. &dcmi_pins_b) and use that
instead of overriding an existing one.

Current convention is also to place all STM32MP1 pinctrl nodes into
a central file, not in the individual board device trees.

Cheers,
Ahmad

> 
> Signed-off-by: Grzegorz Szymaszek <gszymaszek@...rt.pl>
> ---
>  arch/arm/boot/dts/stm32mp157c-odyssey.dts | 32 +++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
> index be1dd5e9e744..2d6cf70ca623 100644
> --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
> @@ -22,6 +22,38 @@ chosen {
>  	};
>  };
>  
> +&dcmi_pins_a {
> +	pins {
> +		pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
> +			 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
> +			 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
> +			 <STM32_PINMUX('C', 6,  AF13)>,/* DCMI_D0 */
> +			 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
> +			 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
> +			 <STM32_PINMUX('E', 1,  AF13)>,/* DCMI_D3 */
> +			 <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
> +			 <STM32_PINMUX('D', 3,  AF13)>,/* DCMI_D5 */
> +			 <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
> +			 <STM32_PINMUX('B', 9,  AF13)>;/* DCMI_D7 */
> +	};
> +};
> +
> +&dcmi_sleep_pins_a {
> +	pins {
> +		pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
> +			 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
> +			 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
> +			 <STM32_PINMUX('C', 6,  ANALOG)>,/* DCMI_D0 */
> +			 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
> +			 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
> +			 <STM32_PINMUX('E', 1,  ANALOG)>,/* DCMI_D3 */
> +			 <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
> +			 <STM32_PINMUX('D', 3,  ANALOG)>,/* DCMI_D5 */
> +			 <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
> +			 <STM32_PINMUX('B', 9,  ANALOG)>;/* DCMI_D7 */
> +	};
> +};
> +
>  &ethernet0 {
>  	status = "okay";
>  	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |