Message-ID: <YLmvkdbIB0OahzDY@dhcp-128-65.nay.redhat.com>
Date:   Fri, 4 Jun 2021 12:44:01 +0800
From:   Dave Young <dyoung@...hat.com>
To:     Baoquan He <bhe@...hat.com>
Cc:     linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
        kexec@...ts.infradead.org, Jonathan Corbet <corbet@....net>,
        akpm@...ux-foundation.org,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>,
        Michael Ellerman <mpe@...erman.id.au>,
        Hari Bathini <hbathini@...ux.ibm.com>,
        Heiko Carstens <hca@...ux.ibm.com>,
        Vasily Gorbik <gor@...ux.ibm.com>,
        Christian Borntraeger <borntraeger@...ibm.com>,
        Russell King <linux@...linux.org.uk>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        "H. Peter Anvin" <hpa@...or.com>, vgoyal@...hat.com,
        x86@...nel.org, Eric Biederman <ebiederm@...ssion.com>
Subject: Re: [PATCH v2] Documentation: kdump: update kdump guide

Hi Baoquan,

Just some spell checking found issues please see comments inline.
Otherwise looks good to me:

Acked-by: Dave Young <dyoung@...hat.com>

On 06/03/21 at 12:30pm, Baoquan He wrote:
> Some parts of the guide are aged, hence need be updated.
> 
> 1) The backup area of the 1st 640K on X86_64 has been removed
>    by below commits, update the description accordingly.
> 
>    commit 7c321eb2b843 ("x86/kdump: Remove the backup region handling")
>    commit 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
> 
> 2) Sort out the descripiton of "crashkernel syntax" part.
> 
> 3) And some other minor cleanups.
> 
> Signed-off-by: Baoquan He <bhe@...hat.com>
> ---
> v1->v2:
>  Update the obsolete descriptions about SMP and RELOCATABLE according
>  to Dave's comment.
> 
>  Documentation/admin-guide/kdump/kdump.rst | 165 ++++++++++++++--------
>  1 file changed, 106 insertions(+), 59 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
> index 75a9dd98e76e..f83bf7bac503 100644
> --- a/Documentation/admin-guide/kdump/kdump.rst
> +++ b/Documentation/admin-guide/kdump/kdump.rst
> @@ -2,7 +2,7 @@
>  Documentation for Kdump - The kexec-based Crash Dumping Solution
>  ================================================================
>  
> -This document includes overview, setup and installation, and analysis
> +This document includes overview, setup, installation, and analysis
>  information.
>  
>  Overview
> @@ -13,9 +13,9 @@ dump of the system kernel's memory needs to be taken (for example, when
>  the system panics). The system kernel's memory image is preserved across
>  the reboot and is accessible to the dump-capture kernel.
>  
> -You can use common commands, such as cp and scp, to copy the
> -memory image to a dump file on the local disk, or across the network to
> -a remote system.
> +You can use common commands, such as cp, scp or makedumpfile to copy
> +the memory image to a dump file on the local disk, or across the network
> +to a remote system.
>  
>  Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
>  s390x, arm and arm64 architectures.
> @@ -27,12 +27,14 @@ The kexec -p command loads the dump-capture kernel into this reserved
>  memory.
>  
>  On x86 machines, the first 640 KB of physical memory is needed to boot,

s/to boot/for boot

> -regardless of where the kernel loads. Therefore, kexec backs up this
> -region just before rebooting into the dump-capture kernel.
> +regardless of where the kernel loads. For simpler handling, the whole
> +low 1M is reserved to avoid any later kernel or device driver writing
> +data into this area. Like this, the low 1M can be reused as system RAM
> +by kdump kernel without extra handling.
>  
> -Similarly on PPC64 machines first 32KB of physical memory is needed for
> -booting regardless of where the kernel is loaded and to support 64K page
> -size kexec backs up the first 64KB memory.
> +On PPC64 machines first 32KB of physical memory is needed for booting
> +regardless of where the kernel is loaded and to support 64K page size
> +kexec backs up the first 64KB memory.
>  
>  For s390x, when kdump is triggered, the crashkernel region is exchanged
>  with the region [0, crashkernel region size] and then the kdump kernel
> @@ -46,14 +48,14 @@ passed to the dump-capture kernel through the elfcorehdr= boot
>  parameter. Optionally the size of the ELF header can also be passed
>  when using the elfcorehdr=[size[KMG]@]offset[KMG] syntax.
>  
> -
>  With the dump-capture kernel, you can access the memory image through
>  /proc/vmcore. This exports the dump as an ELF-format file that you can
> -write out using file copy commands such as cp or scp. Further, you can
> -use analysis tools such as the GNU Debugger (GDB) and the Crash tool to
> -debug the dump file. This method ensures that the dump pages are correctly
> -ordered.
> -
> +write out using file copy commands such as cp or scp. You can also use
> +makedumpfile utility to analyze and write out filtered contents with
> +options, e.g with '-d 31' it will only write out kernel data. Further,
> +you can use analysis tools such as the GNU Debugger (GDB) and the Crash
> +tool to debug the dump file. This method ensures that the dump pages are
> +correctly ordered.
>  
>  Setup and Installation
>  ======================
> @@ -125,9 +127,18 @@ dump-capture kernels for enabling kdump support.
>  System kernel config options
>  ----------------------------
>  
> -1) Enable "kexec system call" in "Processor type and features."::
> +1) Enable "kexec system call" or "kexec file based system call" in
> +   "Processor type and features."::
> +
> +	CONFIG_KEXEC=y or CONFIG_KEXEC_FILE=y
> +
> +   And both of them will select KEXEC_CORE::
>  
> -	CONFIG_KEXEC=y
> +	CONFIG_KEXEC_CORE=y
> +
> +   Subsequently, CRASH_CORE is selected by KEXEC_CORE::
> +
> +	CONFIG_CRASH_CORE=y
>  
>  2) Enable "sysfs file system support" in "Filesystem" -> "Pseudo
>     filesystems." This is usually enabled by default::
> @@ -175,17 +186,19 @@ Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
>  
>  	CONFIG_HIGHMEM4G
>  
> -2) On i386 and x86_64, disable symmetric multi-processing support
> -   under "Processor type and features"::
> +2) With CONFIG_SMP=y, usually nr_cpus=1 need specified on the kernel
> +   command line when loading the dump-capture kernel because one
> +   CPU is enough for kdump kernel to dump vmcore on most of systems.
>  
> -	CONFIG_SMP=n
> +   However, you can also specify nr_cpus=X to enable multiple processors
> +   in kdump kernel. In this case, "disable_cpu_apicid=" is needed to
> +   tell kdump kernel which cpu is 1st kernel's BSP. Please refer to
> +   admin-guide/kernel-parameters.txt for more details.
>  
> -   (If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
> -   when loading the dump-capture kernel, see section "Load the Dump-capture
> -   Kernel".)
> +   With CONFIG_SMP=n, the above things are not related.
>  
> -3) If one wants to build and use a relocatable kernel,
> -   Enable "Build a relocatable kernel" support under "Processor type and
> +3) A relocatable kernel is suggested to be built by default. If not yet,
> +   enable "Build a relocatable kernel" support under "Processor type and
>     features"::
>  
>  	CONFIG_RELOCATABLE=y
> @@ -241,10 +254,6 @@ Dump-capture kernel config options (Arch Dependent, ia64)
>  
>  	crashkernel=256M
>  
> -  If the start address is specified, note that the start address of the
> -  kernel will be aligned to 64Mb, so if the start address is not then
> -  any space below the alignment point will be wasted.
> -
>  Dump-capture kernel config options (Arch Dependent, arm)
>  ----------------------------------------------------------
>  
> @@ -260,46 +269,81 @@ Dump-capture kernel config options (Arch Dependent, arm64)
>    on non-VHE systems even if it is configured. This is because the CPU
>    will not be reset to EL2 on panic.
>  
> -Extended crashkernel syntax
> +crashkernel syntax
>  ===========================
> +1) crashkernel=size@...set
>  
> -While the "crashkernel=size[@offset]" syntax is sufficient for most
> -configurations, sometimes it's handy to have the reserved memory dependent
> -on the value of System RAM -- that's mostly for distributors that pre-setup
> -the kernel command line to avoid a unbootable system after some memory has
> -been removed from the machine.
> +   Here 'size' specifies how much memory to reserve for the dump-capture kernel
> +   and 'offset' specifies the beginning of this reserved memory. For example,
> +   "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
> +   starting at physical address 0x01000000 (16MB) for the dump-capture kernel.
>  
> -The syntax is::
> +   The crashkernel region can be automatically placed by the system
> +   kernel at run time. This is done by specifying the base address as 0,

s/run time/runtime

> +   or omitting it all together::
>  
> -    crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
> -    range=start-[end]
> +         crashkernel=256M@0
> +   or::
>  
> -For example::
> +         crashkernel=256M
>  
> -    crashkernel=512M-2G:64M,2G-:128M
> +   If the start address is specified, note that the start address of the
> +   kernel will be aligned to a value (which is Arch dependent), so if the
> +   start address is not then any space below the alignment point will be
> +   wasted.
>  
> -This would mean:
> +2) range1:size1[,range2:size2,...][@offset]
>  
> -    1) if the RAM is smaller than 512M, then don't reserve anything
> -       (this is the "rescue" case)
> -    2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
> -    3) if the RAM size is larger than 2G, then reserve 128M
> +   While the "crashkernel=size[@offset]" syntax is sufficient for most
> +   configurations, sometimes it's handy to have the reserved memory dependent
> +   on the value of System RAM -- that's mostly for distributors that pre-setup
> +   the kernel command line to avoid a unbootable system after some memory has
> +   been removed from the machine.
>  
> +   The syntax is::
>  
> +       crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
> +       range=start-[end]
>  
> -Boot into System Kernel
> -=======================
> +   For example::
> +
> +       crashkernel=512M-2G:64M,2G-:128M
> +
> +   This would mean:
>  
> +       1) if the RAM is smaller than 512M, then don't reserve anything
> +          (this is the "rescue" case)
> +       2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
> +       3) if the RAM size is larger than 2G, then reserve 128M
> +
> +3) crashkernel=size,high and crashkernel=size,low
> +
> +   If memory above 4G is preferred, crashkernel=size,high can be used to
> +   fulfill that. With it, physical memory is allowed to allocate from top,

s/allocate/be allocated

> +   so could be above 4G if system has more than 4G RAM installed. Otherwise,
> +   memory region will be allocated below 4G if available.
> +
> +   When crashkernel=X,high is passed, kernel could allocate physical memory
> +   region above 4G, low memory under 4G is needed in this case. There are
> +   three ways to get low memory:
> +
> +      1) Kernel will allocate at least 256M memory below 4G automatically
> +         if crashkernel=Y,low is not specified.
> +      2) Let user specify low memory size instread.

s/instread/instead

> +      3) Specified value 0 will disable low memory allocation::
> +
> +            crashkernel=0,low
> +
> +Boot into System Kernel
> +-----------------------
>  1) Update the boot loader (such as grub, yaboot, or lilo) configuration
>     files as necessary.
>  
> -2) Boot the system kernel with the boot parameter "crashkernel=Y@X",
> -   where Y specifies how much memory to reserve for the dump-capture kernel
> -   and X specifies the beginning of this reserved memory. For example,
> -   "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
> -   starting at physical address 0x01000000 (16MB) for the dump-capture kernel.
> +2) Boot the system kernel with the boot parameter "crashkernel=Y@X".
>  
> -   On x86 and x86_64, use "crashkernel=64M@16M".
> +   On x86 and x86_64, use "crashkernel=Y[@X]". Most of the time, the
> +   start address 'X' is not necessary, kernel will search a suitable
> +   area. Unless an explicit start address is expected.
>  
>     On ppc64, use "crashkernel=128M@32M".
>  
> @@ -331,8 +375,8 @@ of dump-capture kernel. Following is the summary.
>  
>  For i386 and x86_64:
>  
> -	- Use vmlinux if kernel is not relocatable.
>  	- Use bzImage/vmlinuz if kernel is relocatable.
> +	- Use vmlinux if kernel is not relocatable.
>  
>  For ppc64:
>  
> @@ -392,7 +436,7 @@ loading dump-capture kernel.
>  
>  For i386, x86_64 and ia64:
>  
> -	"1 irqpoll maxcpus=1 reset_devices"
> +	"1 irqpoll nr_cpus=1 reset_devices"
>  
>  For ppc64:
>  
> @@ -400,7 +444,7 @@ For ppc64:
>  
>  For s390x:
>  
> -	"1 maxcpus=1 cgroup_disable=memory"
> +	"1 nr_cpus=1 cgroup_disable=memory"
>  
>  For arm:
>  
> @@ -408,7 +452,7 @@ For arm:
>  
>  For arm64:
>  
> -	"1 maxcpus=1 reset_devices"
> +	"1 nr_cpus=1 reset_devices"
>  
>  Notes on loading the dump-capture kernel:
>  
> @@ -488,6 +532,10 @@ the following command::
>  
>     cp /proc/vmcore <dump-file>
>  
> +You can also use makedumpfile utility to write out the dump file
> +with specified options to filter out unwanted contents, e.g::
> +
> +   makedumpfile -l --message-level 1 -d 31 /proc/vmcore <dump-file>
>  
>  Analysis
>  ========
> @@ -535,8 +583,7 @@ This will cause a kdump to occur at the add_taint()->panic() call.
>  Contact
>  =======
>  
> -- Vivek Goyal (vgoyal@...hat.com)
> -- Maneesh Soni (maneesh@...ibm.com)
> +- kexec@...ts.infradead.org
>  
>  GDB macros
>  ==========
> -- 
> 2.17.2
> 

Thanks
Dave

Powered by blists - more mailing lists