| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 6 Jun 2021 08:44:01 +0200
From: Bernd Edlinger <bernd.edlinger@...mail.de>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
"Gustavo A. R. Silva" <gustavoars@...nel.org>,
Colin Ian King <colin.king@...onical.com>,
"jingle.wu" <jingle.wu@....com.tw>,
Lee Jones <lee.jones@...aro.org>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3] Input: elantech - fix x_max/y_max values
Ping...
On 5/30/21 6:35 AM, Bernd Edlinger wrote:
> Since commit 37548659bb22 ("Input: elantech - query the min/max information beforehand too")
> moved the querying of the x_max/y_max values from
> elantech_set_input_params to elantech_query_info,
> the returned x_max/y_max values are different than before,
> at least for some firmware versions.
>
> The reason is likely that this is now done before
> elantech_set_absolute_mode does run. So it may happen that
> the returned values are exactly half of what they used to be,
> which makes input_report_abs in PS/2 mode report ABS_X values which
> exceed the x_max value, which is very annoying since the mouse stops
> to move then, and ABS_Y value become negative, which is benign.
>
> This was observed with a MSI GX70 laptop:
>
> elantech: assuming hardware version 3 (with firmware version 0x250f01)
> elantech: Synaptics capabilities query result 0x18, 0x17, 0x0b.
> elantech: Elan sample query result 05, 0e, 00
> input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio...
>
> This patch moves the code sending the ETP_FW_ID_QUERY command to
> the function elantech_set_range and calls this function in
> elantech_query_info for hw_version == 4, but for hw_version < 4 it is
> called in elantech_setup_ps2 after the function elantech_set_absolute_mode.
>
> It is right to switch the touchpad into absolute mode first to get valid
> results from the ID query call in hardware version 2 and 3.
>
> There is no way how this change can affect the state of the firmware
> when elantech_setup_smbus is called later, since that can only happen for
> hardware version 4, see elantech_init_smbusand elantech_use_host_notify
> which uses ETP_NEW_IC_SMBUS_HOST_NOTIFY and info->bus.
>
> The macro ETP_NEW_IC_SMBUS_HOST_NOTIFY can only return true
> for (fw_version & 0x0f0000) == 0x0f0000 which implies v4 hardware.
> The value info->bus can only be unequal to ETP_BUS_PS2_ONLY,
> if elantech_get_resolution_v4 was called from elantech_query_info,
> which is again guarded by info->hw_version == 4.
>
> Fixes: 37548659bb22 ("Input: elantech - query the min/max information beforehand too")
>
> Signed-off-by: Bernd Edlinger <bernd.edlinger@...mail.de>
> ---
> v3: Do the ID_QUEERY after set absoulute mode for hw_version < 4.
> Note: It turned out to be more difficult to call elantech_set_absolute_mode
> from elantech_query_info.
>
> drivers/input/mouse/elantech.c | 172 ++++++++++++++++++++++-------------------
> 1 file changed, 94 insertions(+), 78 deletions(-)
>
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index 97381e2..5f4a1a4 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -1078,6 +1078,94 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
> return rc;
> }
>
> +static int elantech_set_range(struct psmouse *psmouse,
> + struct elantech_device_info *info)
> +{
> + unsigned char param[3];
> + unsigned char traces;
> +
> + /* query range information */
> + switch (info->hw_version) {
> + case 1:
> + info->x_min = ETP_XMIN_V1;
> + info->y_min = ETP_YMIN_V1;
> + info->x_max = ETP_XMAX_V1;
> + info->y_max = ETP_YMAX_V1;
> + break;
> +
> + case 2:
> + if (info->fw_version == 0x020800 ||
> + info->fw_version == 0x020b00 ||
> + info->fw_version == 0x020030) {
> + info->x_min = ETP_XMIN_V2;
> + info->y_min = ETP_YMIN_V2;
> + info->x_max = ETP_XMAX_V2;
> + info->y_max = ETP_YMAX_V2;
> + } else {
> + int i;
> + int fixed_dpi;
> +
> + i = (info->fw_version > 0x020800 &&
> + info->fw_version < 0x020900) ? 1 : 2;
> +
> + if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
> + return -EINVAL;
> +
> + fixed_dpi = param[1] & 0x10;
> +
> + if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
> + if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
> + return -EINVAL;
> +
> + info->x_max = (info->capabilities[1] - i) * param[1] / 2;
> + info->y_max = (info->capabilities[2] - i) * param[2] / 2;
> + } else if (info->fw_version == 0x040216) {
> + info->x_max = 819;
> + info->y_max = 405;
> + } else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
> + info->x_max = 900;
> + info->y_max = 500;
> + } else {
> + info->x_max = (info->capabilities[1] - i) * 64;
> + info->y_max = (info->capabilities[2] - i) * 64;
> + }
> + }
> + break;
> +
> + case 3:
> + if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
> + return -EINVAL;
> +
> + info->x_max = (0x0f & param[0]) << 8 | param[1];
> + info->y_max = (0xf0 & param[0]) << 4 | param[2];
> + break;
> +
> + case 4:
> + if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
> + return -EINVAL;
> +
> + info->x_max = (0x0f & param[0]) << 8 | param[1];
> + info->y_max = (0xf0 & param[0]) << 4 | param[2];
> + traces = info->capabilities[1];
> + if ((traces < 2) || (traces > info->x_max))
> + return -EINVAL;
> +
> + info->width = info->x_max / (traces - 1);
> +
> + /* column number of traces */
> + info->x_traces = traces;
> +
> + /* row number of traces */
> + traces = info->capabilities[2];
> + if ((traces >= 2) && (traces <= info->y_max))
> + info->y_traces = traces;
> +
> + break;
> + }
> +
> + return 0;
> +}
> +
> /*
> * (value from firmware) * 10 + 790 = dpi
> * we also have to convert dpi to dots/mm (*10/254 to avoid floating point)
> @@ -1659,7 +1747,6 @@ static int elantech_query_info(struct psmouse *psmouse,
> struct elantech_device_info *info)
> {
> unsigned char param[3];
> - unsigned char traces;
> unsigned char ic_body[3];
>
> memset(info, 0, sizeof(*info));
> @@ -1759,85 +1846,9 @@ static int elantech_query_info(struct psmouse *psmouse,
> psmouse_warn(psmouse,
> "failed to query resolution data.\n");
> }
> - }
> -
> - /* query range information */
> - switch (info->hw_version) {
> - case 1:
> - info->x_min = ETP_XMIN_V1;
> - info->y_min = ETP_YMIN_V1;
> - info->x_max = ETP_XMAX_V1;
> - info->y_max = ETP_YMAX_V1;
> - break;
> -
> - case 2:
> - if (info->fw_version == 0x020800 ||
> - info->fw_version == 0x020b00 ||
> - info->fw_version == 0x020030) {
> - info->x_min = ETP_XMIN_V2;
> - info->y_min = ETP_YMIN_V2;
> - info->x_max = ETP_XMAX_V2;
> - info->y_max = ETP_YMAX_V2;
> - } else {
> - int i;
> - int fixed_dpi;
> -
> - i = (info->fw_version > 0x020800 &&
> - info->fw_version < 0x020900) ? 1 : 2;
> -
> - if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
> - return -EINVAL;
>
> - fixed_dpi = param[1] & 0x10;
> -
> - if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
> - if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
> - return -EINVAL;
> -
> - info->x_max = (info->capabilities[1] - i) * param[1] / 2;
> - info->y_max = (info->capabilities[2] - i) * param[2] / 2;
> - } else if (info->fw_version == 0x040216) {
> - info->x_max = 819;
> - info->y_max = 405;
> - } else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
> - info->x_max = 900;
> - info->y_max = 500;
> - } else {
> - info->x_max = (info->capabilities[1] - i) * 64;
> - info->y_max = (info->capabilities[2] - i) * 64;
> - }
> - }
> - break;
> -
> - case 3:
> - if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
> - return -EINVAL;
> -
> - info->x_max = (0x0f & param[0]) << 8 | param[1];
> - info->y_max = (0xf0 & param[0]) << 4 | param[2];
> - break;
> -
> - case 4:
> - if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
> + if (elantech_set_range(psmouse, info))
> return -EINVAL;
> -
> - info->x_max = (0x0f & param[0]) << 8 | param[1];
> - info->y_max = (0xf0 & param[0]) << 4 | param[2];
> - traces = info->capabilities[1];
> - if ((traces < 2) || (traces > info->x_max))
> - return -EINVAL;
> -
> - info->width = info->x_max / (traces - 1);
> -
> - /* column number of traces */
> - info->x_traces = traces;
> -
> - /* row number of traces */
> - traces = info->capabilities[2];
> - if ((traces >= 2) && (traces <= info->y_max))
> - info->y_traces = traces;
> -
> - break;
> }
>
> /* check for the middle button: DMI matching or new v4 firmwares */
> @@ -2037,6 +2048,11 @@ static int elantech_setup_ps2(struct psmouse *psmouse,
> goto init_fail;
> }
>
> + if (info->hw_version < 4) {
> + if (elantech_set_range(psmouse, &etd->info))
> + goto init_fail;
> + }
> +
> if (info->fw_version == 0x381f17) {
> etd->original_set_rate = psmouse->set_rate;
> psmouse->set_rate = elantech_set_rate_restore_reg_07;
>
Powered by blists - more mailing lists