| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 7 Jun 2021 19:15:58 +0530
From: Vignesh Raghavendra <vigneshr@...com>
To: Nishanth Menon <nm@...com>
CC: Rob Herring <robh+dt@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Linux ARM Mailing List <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH] arm64: dts: ti: Drop reg-io-width/reg-shift from UART nodes
8250_omap compatible UART IPs on all SoCs have registers aligned at 4
byte address boundary and constant byte addressability. Thus there is no
need for reg-io-width or reg-shift DT properties. These properties are
not used by 8250_omap driver nor documented as part of binding document.
Therefore drop them.
This is in preparation to move omap-serial.txt to YAML format.
Signed-off-by: Vignesh Raghavendra <vigneshr@...com>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 14 -------------
arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 4 ----
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 6 ------
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 20 -------------------
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 4 ----
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 20 -------------------
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ----
9 files changed, 76 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index ca59d1f711f8..f1c42ef05e52 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -189,8 +189,6 @@ phy_gmii_sel: phy@...4 {
main_uart0: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -202,8 +200,6 @@ main_uart0: serial@...0000 {
main_uart1: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -215,8 +211,6 @@ main_uart1: serial@...0000 {
main_uart2: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -228,8 +222,6 @@ main_uart2: serial@...0000 {
main_uart3: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -241,8 +233,6 @@ main_uart3: serial@...0000 {
main_uart4: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -254,8 +244,6 @@ main_uart4: serial@...0000 {
main_uart5: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -267,8 +255,6 @@ main_uart5: serial@...0000 {
main_uart6: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index deb19ae5e168..20274df5f216 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -9,8 +9,6 @@ &cbass_mcu {
mcu_uart0: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x04a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -22,8 +20,6 @@ mcu_uart0: serial@...0000 {
mcu_uart1: serial@...0000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x04a10000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 6cd3131eb9ff..05964943a4a4 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -84,8 +84,6 @@ serdes1: serdes@...000 {
main_uart0: serial@...0000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -95,8 +93,6 @@ main_uart0: serial@...0000 {
main_uart1: serial@...0000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
@@ -105,8 +101,6 @@ main_uart1: serial@...0000 {
main_uart2: serial@...0000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index f5b8ef2f5f77..c93ff1520a0e 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -23,8 +23,6 @@ phy_gmii_sel: phy@...0 {
mcu_uart0: serial@...00000 {
compatible = "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 7cb864b4d74a..9d21cdf6fce8 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -50,8 +50,6 @@ wkup_pmx0: pinctrl@...1c000 {
wkup_uart0: serial@...00000 {
compatible = "ti,am654-uart";
reg = <0x42300000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 19fea8adbcff..5a2f75a455c5 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -301,8 +301,6 @@ main_pmx0: pinctrl@...000 {
main_uart0: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -314,8 +312,6 @@ main_uart0: serial@...0000 {
main_uart1: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -327,8 +323,6 @@ main_uart1: serial@...0000 {
main_uart2: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -340,8 +334,6 @@ main_uart2: serial@...0000 {
main_uart3: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -353,8 +345,6 @@ main_uart3: serial@...0000 {
main_uart4: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -366,8 +356,6 @@ main_uart4: serial@...0000 {
main_uart5: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -379,8 +367,6 @@ main_uart5: serial@...0000 {
main_uart6: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -392,8 +378,6 @@ main_uart6: serial@...0000 {
main_uart7: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02870000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -405,8 +389,6 @@ main_uart7: serial@...0000 {
main_uart8: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02880000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -418,8 +400,6 @@ main_uart8: serial@...0000 {
main_uart9: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02890000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 5663fe3ea466..5f069b55f449 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -73,8 +73,6 @@ mcu_ram: sram@...00000 {
wkup_uart0: serial@...00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -86,8 +84,6 @@ wkup_uart0: serial@...00000 {
mcu_uart0: serial@...00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 3bcafe4c1742..8a0e29636074 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -775,8 +775,6 @@ pcie3_ep: pcie-ep@...0000 {
main_uart0: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -788,8 +786,6 @@ main_uart0: serial@...0000 {
main_uart1: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -801,8 +797,6 @@ main_uart1: serial@...0000 {
main_uart2: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -814,8 +808,6 @@ main_uart2: serial@...0000 {
main_uart3: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -827,8 +819,6 @@ main_uart3: serial@...0000 {
main_uart4: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -840,8 +830,6 @@ main_uart4: serial@...0000 {
main_uart5: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -853,8 +841,6 @@ main_uart5: serial@...0000 {
main_uart6: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -866,8 +852,6 @@ main_uart6: serial@...0000 {
main_uart7: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02870000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -879,8 +863,6 @@ main_uart7: serial@...0000 {
main_uart8: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02880000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -892,8 +874,6 @@ main_uart8: serial@...0000 {
main_uart9: serial@...0000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02890000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 5e825e4d0306..d2dceda72fe9 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -73,8 +73,6 @@ mcu_ram: sram@...00000 {
wkup_uart0: serial@...00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -86,8 +84,6 @@ wkup_uart0: serial@...00000 {
mcu_uart0: serial@...00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
--
2.31.1
Powered by blists - more mailing lists