[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YMDdyEzCpdttQyNu@builder.lan>
Date: Wed, 9 Jun 2021 10:27:04 -0500
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Douglas Anderson <dianders@...omium.org>
Cc: Andrzej Hajda <a.hajda@...sung.com>,
Neil Armstrong <narmstrong@...libre.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Sam Ravnborg <sam@...nborg.org>,
Linus W <linus.walleij@...aro.org>, robdclark@...omium.org,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Stanislav Lisovskiy <stanislav.lisovskiy@...el.com>,
Steev Klimaszewski <steev@...i.org>,
linux-arm-msm@...r.kernel.org, Thierry Reding <treding@...dia.com>,
Lyude Paul <lyude@...hat.com>, dri-devel@...ts.freedesktop.org,
Stephen Boyd <swboyd@...omium.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v9 11/11] arm64: dts: qcom: sc7180-trogdor: Move panel
under the bridge chip
On Mon 07 Jun 12:05 CDT 2021, Douglas Anderson wrote:
> Putting the panel under the bridge chip (under the aux-bus node)
> allows the panel driver to get access to the DP AUX bus, enabling all
> sorts of fabulous new features.
>
> While we're at this, get rid of a level of hierarchy for the panel
> node. It doesn't need "ports / port" and can just have a "port" child.
>
> For Linux, this patch has a hard requirement on the patches adding DP
> AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch
> ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus").
>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> Acked-by: Linus Walleij <linus.walleij@...aro.org>
In case you want to merge this together with the driver changes
(even though there's no direct need for them to go together):
Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> ---
>
> (no changes since v7)
>
> Changes in v7:
> - Panel now under bridge chip instead of getting a link to ddc-i2c
>
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 30 ++++++++++----------
> 1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index 24d293ef56d7..c76afd857b54 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -260,21 +260,6 @@ max98357a: audio-codec-0 {
> #sound-dai-cells = <0>;
> };
>
> - panel: panel {
> - /* Compatible will be filled in per-board */
> - power-supply = <&pp3300_dx_edp>;
> - backlight = <&backlight>;
> - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
> -
> - ports {
> - port {
> - panel_in_edp: endpoint {
> - remote-endpoint = <&sn65dsi86_out>;
> - };
> - };
> - };
> - };
> -
> pwmleds {
> compatible = "pwm-leds";
> keyboard_backlight: keyboard-backlight {
> @@ -674,6 +659,21 @@ sn65dsi86_out: endpoint {
> };
> };
> };
> +
> + aux-bus {
> + panel: panel {
> + /* Compatible will be filled in per-board */
> + power-supply = <&pp3300_dx_edp>;
> + backlight = <&backlight>;
> + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + panel_in_edp: endpoint {
> + remote-endpoint = <&sn65dsi86_out>;
> + };
> + };
> + };
> + };
> };
> };
>
> --
> 2.32.0.rc1.229.g3e70b5a671-goog
>
Powered by blists - more mailing lists