| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210609221055.GA171974@robh.at.kernel.org>
Date: Wed, 9 Jun 2021 17:10:55 -0500
From: Rob Herring <robh@...nel.org>
To: Jonathan Marek <jonathan@...ek.ca>
Cc: linux-arm-msm@...r.kernel.org, robert.foss@...aro.org,
andrey.konovalov@...aro.org, Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Todor Tomov <todor.too@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
"open list:QUALCOMM CAMERA SUBSYSTEM DRIVER"
<linux-media@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 17/17] media: dt-bindings: media: camss: Add
qcom,sm8250-camss binding
On Tue, Jun 08, 2021 at 06:35:06PM -0400, Jonathan Marek wrote:
> Add bindings for qcom,sm8250-camss in order to support the camera
> subsystem for SM8250.
>
> Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
> ---
> .../bindings/media/qcom,sm8250-camss.yaml | 399 ++++++++++++++++++
> 1 file changed, 399 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
> new file mode 100644
> index 0000000000000..7180e52ee59a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
> @@ -0,0 +1,399 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
> + - Robert Foss <robert.foss@...aro.org>
> +
> +description: |
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,sm8250-camss
> +
> + clocks:
> + minItems: 31
> + maxItems: 31
> +
> + clock-names:
> + items:
> + - const: cam_hf_axi
> + - const: camnoc_axi
> + - const: csiphy0
> + - const: csiphy0_timer
> + - const: csiphy1
> + - const: csiphy1_timer
> + - const: csiphy2
> + - const: csiphy2_timer
> + - const: csiphy3
> + - const: csiphy3_timer
> + - const: csiphy4
> + - const: csiphy4_timer
> + - const: csiphy5
> + - const: csiphy5_timer
> + - const: vfe0_ahb
> + - const: vfe0_axi
> + - const: vfe0
> + - const: vfe0_cphy_rx
> + - const: vfe0_csid
> + - const: vfe0_areg
> + - const: vfe1_ahb
> + - const: vfe1_axi
> + - const: vfe1
> + - const: vfe1_cphy_rx
> + - const: vfe1_csid
> + - const: vfe1_areg
> + - const: vfe_lite_ahb
> + - const: vfe_lite_axi
> + - const: vfe_lite
> + - const: vfe_lite_cphy_rx
> + - const: vfe_lite_csid
> +
> + interrupts:
> + minItems: 14
> + maxItems: 14
> +
> + interrupt-names:
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csiphy3
> + - const: csiphy4
> + - const: csiphy5
> + - const: vfe0
> + - const: vfe1
> + - const: vfe_lite0
> + - const: vfe_lite1
> +
> + iommus:
> + maxItems: 1
> +
> + power-domains:
> + items:
> + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@4:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@5:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + reg:
> + minItems: 10
> + maxItems: 10
> +
> + reg-names:
Move these before ports. (DT) properties first then nodes.
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csiphy3
> + - const: csiphy4
> + - const: csiphy5
Should be separate phy nodes? Same/similar DPHY or CPHY as QCom DSI PHY?
> + - const: vfe0
> + - const: vfe1
> + - const: vfe_lite0
> + - const: vfe_lite1
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
> + - interrupt-names
> + - interrupts
> + - iommus
> + - power-domains
> + - reg
> + - reg-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,camcc-sm8250.h>
> + #include <dt-bindings/clock/qcom,gcc-sm8250.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + camss: camss@...a000 {
> + compatible = "qcom,sm8250-camss";
> +
> + reg = <0 0xac6a000 0 0x2000>,
> + <0 0xac6c000 0 0x2000>,
> + <0 0xac6e000 0 0x1000>,
> + <0 0xac70000 0 0x1000>,
> + <0 0xac72000 0 0x1000>,
> + <0 0xac74000 0 0x1000>,
> + <0 0xacb4000 0 0xd000>,
> + <0 0xacc3000 0 0xd000>,
> + <0 0xacd9000 0 0x2200>,
> + <0 0xacdb200 0 0x2200>;
> + reg-names = "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + power-domains = <&camcc IFE_0_GDSC>,
> + <&camcc IFE_1_GDSC>,
> + <&camcc TITAN_TOP_GDSC>;
> +
> + clocks = <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY1_CLK>,
> + <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY2_CLK>,
> + <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY3_CLK>,
> + <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY4_CLK>,
> + <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY5_CLK>,
> + <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
> + <&camcc CAM_CC_IFE_0_AHB_CLK>,
> + <&camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_0_AREG_CLK>,
> + <&camcc CAM_CC_IFE_1_AHB_CLK>,
> + <&camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&camcc CAM_CC_IFE_1_CLK>,
> + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&camcc CAM_CC_IFE_1_AREG_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
> +
> + clock-names = "cam_hf_axi",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "csiphy5",
> + "csiphy5_timer",
> + "vfe0_ahb",
> + "vfe0_axi",
> + "vfe0",
> + "vfe0_cphy_rx",
> + "vfe0_csid",
> + "vfe0_areg",
> + "vfe1_ahb",
> + "vfe1_axi",
> + "vfe1",
> + "vfe1_cphy_rx",
> + "vfe1_csid",
> + "vfe1_areg",
> + "vfe_lite_ahb",
> + "vfe_lite_axi",
> + "vfe_lite",
> + "vfe_lite_cphy_rx",
> + "vfe_lite_csid";
> +
> + iommus = <&apps_smmu 0x800 0x400>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
> --
> 2.26.1
Powered by blists - more mailing lists