Message-Id: <20210611090039.22450-2-james.clark@arm.com>
Date:   Fri, 11 Jun 2021 12:00:38 +0300
From:   James Clark <james.clark@....com>
To:     acme@...nel.org, mathieu.poirier@...aro.org,
        coresight@...ts.linaro.org, leo.yan@...aro.org
Cc:     al.grant@....com, branislav.rankov@....com, denik@...omium.org,
        suzuki.poulose@....com, anshuman.khandual@....com,
        James Clark <james.clark@....com>,
        John Garry <john.garry@...wei.com>,
        Will Deacon <will@...nel.org>,
        Mike Leach <mike.leach@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
        Jiri Olsa <jolsa@...hat.com>,
        Namhyung Kim <namhyung@...nel.org>,
        linux-arm-kernel@...ts.infradead.org,
        linux-perf-users@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v6 1/1] perf cs-etm: Split Coresight decode by aux records

Populate the auxtrace queues using AUX records rather than whole
auxtrace buffers so that the decoder is reset between each aux record.

This is similar to the auxtrace_queues__process_index() ->
auxtrace_queues__add_indexed_event() flow where
perf_session__peek_event() is used to read AUXTRACE events out of
random positions in the file based on the auxtrace index. But now we
loop over all PERF_RECORD_AUX events instead of AUXTRACE buffers. For
each PERF_RECORD_AUX event, we find the corresponding AUXTRACE buffer
using the index, and add a fragment of that buffer to the auxtrace
queues. No other changes to decoding were made, apart from populating
the auxtrace queues. The result of decoding is identical to before,
except in cases where decoding failed completely, due to not resetting
the decoder.

The reason for this change is because AUX records are emitted any time
tracing is disabled, for example when the process is scheduled out.
Because ETM was disabled and enabled again, the decoder also needs to
be reset to force the search for a sync packet. Otherwise there would
be fatal decoding errors.

Testing
=======

Testing was done with the following script, to diff the decoding results
between the patched and un-patched versions of perf:

	#!/bin/bash
	set -ex

	$1 script -i $3 $4 > split.script
	$2 script -i $3 $4 > default.script

	diff split.script default.script | head -n 20

And it was run like this, with various itrace options depending on the
quantity of synthesised events:

	compare.sh ./perf-patched ./perf-default perf-per-cpu-2-threads.data --itrace=i100000ns

No changes in output were observed in the following scenarios:

* Simple per-cpu
	perf record -e cs_etm/@..._etr0/u top

* Per-thread, single thread
	perf record -e cs_etm/@..._etr0/u --per-thread ./threads_C

* Per-thread multiple threads (but only one thread collected data):
	perf record -e cs_etm/@..._etr0/u --per-thread --pid 4596,4597

* Per-thread multiple threads (both threads collected data):
	perf record -e cs_etm/@..._etr0/u --per-thread --pid 4596,4597

* Per-cpu explicit threads:
	perf record -e cs_etm/@..._etr0/u --pid 853,854

* System-wide (per-cpu):
    perf record -e cs_etm/@..._etr0/u -a

* No data collected (no aux buffers)
	Can happen with any command when run for a short period

* Containing truncated records
	Can happen with any command

* Containing aux records with 0 size
	Can happen with any command

* Snapshot mode
	perf record -e cs_etm/@..._etr0/u -a --snapshot

Signed-off-by: James Clark <james.clark@....com>
---
 tools/perf/util/cs-etm.c | 156 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 155 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 64536a6ed10a..2e764f140d5e 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -2679,6 +2679,160 @@ static u64 *cs_etm__create_meta_blk(u64 *buff_in, int *buff_in_offset,
 	return metadata;
 }
 
+/**
+ * Puts a fragment of an auxtrace buffer into the auxtrace queues based
+ * on the bounds of aux_event, if it matches with the buffer that's at
+ * file_offset.
+ *
+ * Normally, whole auxtrace buffers would be added to the queue. But we
+ * want to reset the decoder for every PERF_RECORD_AUX event, and the decoder
+ * is reset across each buffer, so splitting the buffers up in advance has
+ * the same effect.
+ */
+static int cs_etm__queue_aux_fragment(struct perf_session *session, off_t file_offset, size_t sz,
+				      struct perf_record_aux *aux_event, struct perf_sample *sample)
+{
+	int err;
+	char buf[PERF_SAMPLE_MAX_SIZE];
+	union perf_event *auxtrace_event_union;
+	struct perf_record_auxtrace *auxtrace_event;
+	union perf_event auxtrace_fragment;
+	__u64 aux_offset;
+	struct cs_etm_auxtrace *etm = container_of(session->auxtrace,
+						   struct cs_etm_auxtrace,
+						   auxtrace);
+
+	/*
+	 * There should be a PERF_RECORD_AUXTRACE event at the file_offset that we got
+	 * from looping through the auxtrace index.
+	 */
+	err = perf_session__peek_event(session, file_offset, buf,
+				       PERF_SAMPLE_MAX_SIZE, &auxtrace_event_union, NULL);
+	if (err)
+		return err;
+	auxtrace_event = &auxtrace_event_union->auxtrace;
+	if (auxtrace_event->header.type != PERF_RECORD_AUXTRACE)
+		return -EINVAL;
+
+	if (auxtrace_event->header.size < sizeof(struct perf_record_auxtrace) ||
+		auxtrace_event->header.size != sz) {
+		return -EINVAL;
+	}
+
+	/*
+	 * In per-thread mode, CPU is set to -1, but TID will be set instead. See
+	 * auxtrace_mmap_params__set_idx(). Return 'not found' if neither CPU nor TID match.
+	 */
+	if ((auxtrace_event->cpu == (__u32) -1 && auxtrace_event->tid != sample->tid) ||
+			auxtrace_event->cpu != sample->cpu)
+		return 1;
+
+	/*
+	 * In snapshot/overwrite mode, the head points to the end of the buffer so aux_offset needs
+	 * to have the size subtracted so it points to the beginning as in normal mode.
+	 */
+	if (aux_event->flags & PERF_AUX_FLAG_OVERWRITE)
+		aux_offset = aux_event->aux_offset - aux_event->aux_size;
+	else
+		aux_offset = aux_event->aux_offset;
+
+	if (aux_offset >= auxtrace_event->offset &&
+	    aux_offset + aux_event->aux_size <= auxtrace_event->offset + auxtrace_event->size) {
+		/*
+		 * If this AUX event was inside this buffer somewhere, create a new auxtrace event
+		 * based on the sizes of the aux event, and queue that fragment.
+		 */
+		auxtrace_fragment.auxtrace = *auxtrace_event;
+		auxtrace_fragment.auxtrace.size = aux_event->aux_size;
+		auxtrace_fragment.auxtrace.offset = aux_offset;
+		file_offset += aux_offset - auxtrace_event->offset + auxtrace_event->header.size;
+		return auxtrace_queues__add_event(&etm->queues, session,
+						  &auxtrace_fragment,
+						  file_offset, NULL);
+	}
+
+	/* Wasn't inside this buffer, but there were no parse errors. 1 == 'not found' */
+	return 1;
+}
+
+static int cs_etm__queue_aux_records_cb(struct perf_session *session, union perf_event *event,
+					u64 offset __maybe_unused, void *data __maybe_unused)
+{
+	struct perf_sample sample;
+	int ret;
+	struct auxtrace_index_entry *ent;
+	struct auxtrace_index *auxtrace_index;
+	struct evsel *evsel;
+	size_t i;
+
+	/* Don't care about any other events, we're only queuing buffers for AUX events */
+	if (event->header.type != PERF_RECORD_AUX)
+		return 0;
+
+	if (event->header.size < sizeof(struct perf_record_aux))
+		return -EINVAL;
+
+	/* Truncated Aux records can have 0 size and shouldn't result in anything being queued. */
+	if (!event->aux.aux_size)
+		return 0;
+
+	/*
+	 * Parse the sample, we need the sample_id_all data that comes after the event so that the
+	 * CPU or PID can be matched to an AUXTRACE buffer's CPU or PID.
+	 */
+	evsel = evlist__event2evsel(session->evlist, event);
+	if (!evsel)
+		return -EINVAL;
+	ret = evsel__parse_sample(evsel, event, &sample);
+	if (ret)
+		return ret;
+
+	/*
+	 * Loop throuch the auxtrace index to find the buffer that matches up with this aux event.
+	 */
+	list_for_each_entry(auxtrace_index, &session->auxtrace_index, list) {
+		for (i = 0; i < auxtrace_index->nr; i++) {
+			ent = &auxtrace_index->entries[i];
+			ret = cs_etm__queue_aux_fragment(session, ent->file_offset,
+							 ent->sz, &event->aux, &sample);
+			/*
+			 * Stop search on error or successful values. Continue search on
+			 * 1 ('not found')
+			 */
+			if (ret != 1)
+				return ret;
+		}
+	}
+
+	/*
+	 * Couldn't find the buffer corresponding to this aux record, something went wrong. Warn but
+	 * don't exit with an error because it will still be possible to decode other aux records.
+	 */
+	pr_err("CS ETM: Couldn't find auxtrace buffer for aux_offset %"PRI_lx64"\n",
+	       event->aux.aux_offset);
+	return 0;
+}
+
+static int cs_etm__queue_aux_records(struct perf_session *session)
+{
+	struct auxtrace_index *index = list_first_entry_or_null(&session->auxtrace_index,
+								struct auxtrace_index, list);
+	if (index && index->nr > 0)
+		return perf_session__peek_events(session, session->header.data_offset,
+						 session->header.data_size,
+						 cs_etm__queue_aux_records_cb, NULL);
+
+	/*
+	 * We would get here if there are no entries in the index (either no auxtrace
+	 * buffers or no index at all). Fail silently as there is the possibility of
+	 * queueing them in cs_etm__process_auxtrace_event() if etm->data_queued is still
+	 * false.
+	 *
+	 * In that scenario, buffers will not be split by AUX records.
+	 */
+	return 0;
+}
+
 int cs_etm__process_auxtrace_info(union perf_event *event,
 				  struct perf_session *session)
 {
@@ -2879,7 +3033,7 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
 	if (err)
 		goto err_delete_thread;
 
-	err = auxtrace_queues__process_index(&etm->queues, session);
+	err = cs_etm__queue_aux_records(session);
 	if (err)
 		goto err_delete_thread;
 
-- 
2.28.0

Powered by blists - more mailing lists