linux-kernel - [patch 11/41] x86/fpu: Get rid of copy_supervisor_to

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210611163112.153392869@linutronix.de>
Date:   Fri, 11 Jun 2021 18:15:34 +0200
From:   Thomas Gleixner <tglx@...utronix.de>
To:     LKML <linux-kernel@...r.kernel.org>
Cc:     Andy Lutomirski <luto@...nel.org>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        Fenghua Yu <fenghua.yu@...el.com>,
        Tony Luck <tony.luck@...el.com>,
        Yu-cheng Yu <yu-cheng.yu@...el.com>,
        Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
        Borislav Petkov <bp@...e.de>,
        Peter Zijlstra <peterz@...radead.org>,
        Kan Liang <kan.liang@...ux.intel.com>
Subject: [patch 11/41] x86/fpu: Get rid of copy_supervisor_to_kernel()

If the fast path of restoring the FPU state on sigreturn fails or is not
taken and the current task's FPU is active then the FPU has to be
deactivated for the slow path to allow a safe update of the tasks FPU
memory state.

With supervisor states enabled, this requires to save the supervisor state
in the memory state first. Supervisor states require XSAVES so saving only
the supervisor state requires to reshuffle the memory buffer because XSAVES
uses the compacted format and therefore stores the supervisor states at the
beginning of the memory state. That's just an overengineered optimization.

Get rid of it and save the full state for this case.

Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
V4: New patch
---
 arch/x86/include/asm/fpu/xstate.h |    1 
 arch/x86/kernel/fpu/signal.c      |   13 +++++---
 arch/x86/kernel/fpu/xstate.c      |   55 --------------------------------------
 3 files changed, 8 insertions(+), 61 deletions(-)

--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -107,7 +107,6 @@ struct membuf;
 void copy_xstate_to_kernel(struct membuf to, struct xregs_state *xsave);
 int copy_kernel_to_xstate(struct xregs_state *xsave, const void *kbuf);
 int copy_user_to_xstate(struct xregs_state *xsave, const void __user *ubuf);
-void copy_supervisor_to_kernel(struct xregs_state *xsave);
 void copy_dynamic_supervisor_to_kernel(struct xregs_state *xstate, u64 mask);
 void copy_kernel_to_dynamic_supervisor(struct xregs_state *xstate, u64 mask);
 
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -411,15 +411,18 @@ static int __fpu__restore_sig(void __use
 	 * the optimisation).
 	 */
 	fpregs_lock();
-
 	if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
-
 		/*
-		 * Supervisor states are not modified by user space input.  Save
-		 * current supervisor states first and invalidate the FPU regs.
+		 * If supervisor states are available then save the
+		 * hardware state in current's fpstate so that the
+		 * supervisor state is preserved. Save the full state for
+		 * simplicity. There is no point in optimizing this by only
+		 * saving the supervisor states and then shuffle them to
+		 * the right place in memory. This is the slow path and the
+		 * above XRSTOR failed or ia32_fxstate is true. Shrug.
 		 */
 		if (xfeatures_mask_supervisor())
-			copy_supervisor_to_kernel(&fpu->state.xsave);
+			copy_xregs_to_kernel(&fpu->state.xsave);
 		set_thread_flag(TIF_NEED_FPU_LOAD);
 	}
 	__fpu_invalidate_fpregs_state(fpu);
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -1129,61 +1129,6 @@ int copy_user_to_xstate(struct xregs_sta
 	return 0;
 }
 
-/*
- * Save only supervisor states to the kernel buffer.  This blows away all
- * old states, and is intended to be used only in __fpu__restore_sig(), where
- * user states are restored from the user buffer.
- */
-void copy_supervisor_to_kernel(struct xregs_state *xstate)
-{
-	struct xstate_header *header;
-	u64 max_bit, min_bit;
-	u32 lmask, hmask;
-	int err, i;
-
-	if (WARN_ON(!boot_cpu_has(X86_FEATURE_XSAVES)))
-		return;
-
-	if (!xfeatures_mask_supervisor())
-		return;
-
-	max_bit = __fls(xfeatures_mask_supervisor());
-	min_bit = __ffs(xfeatures_mask_supervisor());
-
-	lmask = xfeatures_mask_supervisor();
-	hmask = xfeatures_mask_supervisor() >> 32;
-	XSTATE_OP(XSAVES, xstate, lmask, hmask, err);
-
-	/* We should never fault when copying to a kernel buffer: */
-	if (WARN_ON_FPU(err))
-		return;
-
-	/*
-	 * At this point, the buffer has only supervisor states and must be
-	 * converted back to normal kernel format.
-	 */
-	header = &xstate->header;
-	header->xcomp_bv |= xfeatures_mask_all;
-
-	/*
-	 * This only moves states up in the buffer.  Start with
-	 * the last state and move backwards so that states are
-	 * not overwritten until after they are moved.  Note:
-	 * memmove() allows overlapping src/dst buffers.
-	 */
-	for (i = max_bit; i >= min_bit; i--) {
-		u8 *xbuf = (u8 *)xstate;
-
-		if (!((header->xfeatures >> i) & 1))
-			continue;
-
-		/* Move xfeature 'i' into its normal location */
-		memmove(xbuf + xstate_comp_offsets[i],
-			xbuf + xstate_supervisor_only_offsets[i],
-			xstate_sizes[i]);
-	}
-}
-
 /**
  * copy_dynamic_supervisor_to_kernel() - Save dynamic supervisor states to
  *                                       an xsave area