| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210616134658.1471835-7-hch@lst.de>
Date: Wed, 16 Jun 2021 15:46:58 +0200
From: Christoph Hellwig <hch@....de>
To: "David S. Miller" <davem@...emloft.net>,
Jens Axboe <axboe@...nel.dk>,
Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Richard Henderson <rth@...ddle.net>,
Ivan Kokshaysky <ink@...assic.park.msu.ru>,
Matt Turner <mattst88@...il.com>,
Russell King <linux@...linux.org.uk>,
Michael Ellerman <mpe@...erman.id.au>,
Linus Torvalds <torvalds@...ux-foundation.org>,
linux-ide@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-alpha@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-m68k@...ts.linux-m68k.org
Subject: [PATCH 6/6] ide: remove the legacy ide driver
The legay ide driver has been replace with libata startin in 2003 and has
been scheduled for removal for a while. Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.
Signed-off-by: Christoph Hellwig <hch@....de>
---
Documentation/userspace-api/ioctl/hdio.rst | 845 +-------
MAINTAINERS | 16 -
drivers/Kconfig | 2 -
drivers/Makefile | 1 -
drivers/ide/Kconfig | 827 --------
drivers/ide/Makefile | 109 -
drivers/ide/aec62xx.c | 331 ----
drivers/ide/ali14xx.c | 250 ---
drivers/ide/alim15x3.c | 602 ------
drivers/ide/amd74xx.c | 343 ----
drivers/ide/atiixp.c | 212 --
drivers/ide/buddha.c | 238 ---
drivers/ide/cmd640.c | 848 --------
drivers/ide/cmd64x.c | 452 -----
drivers/ide/cs5520.c | 168 --
drivers/ide/cs5530.c | 295 ---
drivers/ide/cs5535.c | 216 --
drivers/ide/cs5536.c | 294 ---
drivers/ide/cy82c693.c | 234 ---
drivers/ide/delkin_cb.c | 181 --
drivers/ide/dtc2278.c | 155 --
drivers/ide/falconide.c | 226 ---
drivers/ide/gayle.c | 188 --
drivers/ide/hpt366.c | 1545 ---------------
drivers/ide/ht6560b.c | 383 ----
drivers/ide/icside.c | 692 -------
drivers/ide/ide-4drives.c | 65 -
drivers/ide/ide-acpi.c | 622 ------
drivers/ide/ide-atapi.c | 756 -------
drivers/ide/ide-cd.c | 1858 -----------------
drivers/ide/ide-cd.h | 123 --
drivers/ide/ide-cd_ioctl.c | 468 -----
drivers/ide/ide-cd_verbose.c | 362 ----
drivers/ide/ide-cs.c | 364 ----
drivers/ide/ide-devsets.c | 192 --
drivers/ide/ide-disk.c | 795 --------
drivers/ide/ide-disk.h | 30 -
drivers/ide/ide-disk_ioctl.c | 33 -
drivers/ide/ide-disk_proc.c | 125 --
drivers/ide/ide-dma-sff.c | 336 ----
drivers/ide/ide-dma.c | 551 ------
drivers/ide/ide-eh.c | 443 -----
drivers/ide/ide-floppy.c | 551 ------
drivers/ide/ide-floppy.h | 42 -
drivers/ide/ide-floppy_ioctl.c | 339 ----
drivers/ide/ide-floppy_proc.c | 34 -
drivers/ide/ide-gd.c | 432 ----
drivers/ide/ide-gd.h | 43 -
drivers/ide/ide-generic.c | 139 --
drivers/ide/ide-io-std.c | 262 ---
drivers/ide/ide-io.c | 904 ---------
drivers/ide/ide-ioctls.c | 306 ---
drivers/ide/ide-iops.c | 536 -----
drivers/ide/ide-legacy.c | 59 -
drivers/ide/ide-lib.c | 146 --
drivers/ide/ide-park.c | 155 --
drivers/ide/ide-pci-generic.c | 203 --
drivers/ide/ide-pio-blacklist.c | 96 -
drivers/ide/ide-pm.c | 261 ---
drivers/ide/ide-pnp.c | 92 -
drivers/ide/ide-probe.c | 1623 ---------------
drivers/ide/ide-proc.c | 633 ------
drivers/ide/ide-scan-pci.c | 113 --
drivers/ide/ide-sysfs.c | 143 --
drivers/ide/ide-tape.c | 2083 --------------------
drivers/ide/ide-taskfile.c | 668 -------
drivers/ide/ide-timings.c | 198 --
drivers/ide/ide-xfer-mode.c | 267 ---
drivers/ide/ide.c | 415 ----
drivers/ide/ide_platform.c | 133 --
drivers/ide/it8172.c | 165 --
drivers/ide/it8213.c | 217 --
drivers/ide/it821x.c | 715 -------
drivers/ide/jmicron.c | 176 --
drivers/ide/ns87415.c | 350 ----
drivers/ide/opti621.c | 179 --
drivers/ide/palm_bk3710.c | 387 ----
drivers/ide/pdc202xx_new.c | 557 ------
drivers/ide/pdc202xx_old.c | 362 ----
drivers/ide/piix.c | 476 -----
drivers/ide/pmac.c | 1703 ----------------
drivers/ide/qd65xx.c | 446 -----
drivers/ide/qd65xx.h | 145 --
drivers/ide/rapide.c | 106 -
drivers/ide/rz1000.c | 100 -
drivers/ide/sc1200.c | 355 ----
drivers/ide/serverworks.c | 456 -----
drivers/ide/setup-pci.c | 682 -------
drivers/ide/siimage.c | 843 --------
drivers/ide/sis5513.c | 637 ------
drivers/ide/sl82c105.c | 367 ----
drivers/ide/slc90e66.c | 182 --
drivers/ide/tc86c001.c | 270 ---
drivers/ide/triflex.c | 143 --
drivers/ide/trm290.c | 374 ----
drivers/ide/tx4938ide.c | 209 --
drivers/ide/tx4939ide.c | 628 ------
drivers/ide/umc8672.c | 184 --
drivers/ide/via82cxxx.c | 532 -----
include/linux/ide.h | 1623 ---------------
100 files changed, 25 insertions(+), 41196 deletions(-)
delete mode 100644 drivers/ide/Kconfig
delete mode 100644 drivers/ide/Makefile
delete mode 100644 drivers/ide/aec62xx.c
delete mode 100644 drivers/ide/ali14xx.c
delete mode 100644 drivers/ide/alim15x3.c
delete mode 100644 drivers/ide/amd74xx.c
delete mode 100644 drivers/ide/atiixp.c
delete mode 100644 drivers/ide/buddha.c
delete mode 100644 drivers/ide/cmd640.c
delete mode 100644 drivers/ide/cmd64x.c
delete mode 100644 drivers/ide/cs5520.c
delete mode 100644 drivers/ide/cs5530.c
delete mode 100644 drivers/ide/cs5535.c
delete mode 100644 drivers/ide/cs5536.c
delete mode 100644 drivers/ide/cy82c693.c
delete mode 100644 drivers/ide/delkin_cb.c
delete mode 100644 drivers/ide/dtc2278.c
delete mode 100644 drivers/ide/falconide.c
delete mode 100644 drivers/ide/gayle.c
delete mode 100644 drivers/ide/hpt366.c
delete mode 100644 drivers/ide/ht6560b.c
delete mode 100644 drivers/ide/icside.c
delete mode 100644 drivers/ide/ide-4drives.c
delete mode 100644 drivers/ide/ide-acpi.c
delete mode 100644 drivers/ide/ide-atapi.c
delete mode 100644 drivers/ide/ide-cd.c
delete mode 100644 drivers/ide/ide-cd.h
delete mode 100644 drivers/ide/ide-cd_ioctl.c
delete mode 100644 drivers/ide/ide-cd_verbose.c
delete mode 100644 drivers/ide/ide-cs.c
delete mode 100644 drivers/ide/ide-devsets.c
delete mode 100644 drivers/ide/ide-disk.c
delete mode 100644 drivers/ide/ide-disk.h
delete mode 100644 drivers/ide/ide-disk_ioctl.c
delete mode 100644 drivers/ide/ide-disk_proc.c
delete mode 100644 drivers/ide/ide-dma-sff.c
delete mode 100644 drivers/ide/ide-dma.c
delete mode 100644 drivers/ide/ide-eh.c
delete mode 100644 drivers/ide/ide-floppy.c
delete mode 100644 drivers/ide/ide-floppy.h
delete mode 100644 drivers/ide/ide-floppy_ioctl.c
delete mode 100644 drivers/ide/ide-floppy_proc.c
delete mode 100644 drivers/ide/ide-gd.c
delete mode 100644 drivers/ide/ide-gd.h
delete mode 100644 drivers/ide/ide-generic.c
delete mode 100644 drivers/ide/ide-io-std.c
delete mode 100644 drivers/ide/ide-io.c
delete mode 100644 drivers/ide/ide-ioctls.c
delete mode 100644 drivers/ide/ide-iops.c
delete mode 100644 drivers/ide/ide-legacy.c
delete mode 100644 drivers/ide/ide-lib.c
delete mode 100644 drivers/ide/ide-park.c
delete mode 100644 drivers/ide/ide-pci-generic.c
delete mode 100644 drivers/ide/ide-pio-blacklist.c
delete mode 100644 drivers/ide/ide-pm.c
delete mode 100644 drivers/ide/ide-pnp.c
delete mode 100644 drivers/ide/ide-probe.c
delete mode 100644 drivers/ide/ide-proc.c
delete mode 100644 drivers/ide/ide-scan-pci.c
delete mode 100644 drivers/ide/ide-sysfs.c
delete mode 100644 drivers/ide/ide-tape.c
delete mode 100644 drivers/ide/ide-taskfile.c
delete mode 100644 drivers/ide/ide-timings.c
delete mode 100644 drivers/ide/ide-xfer-mode.c
delete mode 100644 drivers/ide/ide.c
delete mode 100644 drivers/ide/ide_platform.c
delete mode 100644 drivers/ide/it8172.c
delete mode 100644 drivers/ide/it8213.c
delete mode 100644 drivers/ide/it821x.c
delete mode 100644 drivers/ide/jmicron.c
delete mode 100644 drivers/ide/ns87415.c
delete mode 100644 drivers/ide/opti621.c
delete mode 100644 drivers/ide/palm_bk3710.c
delete mode 100644 drivers/ide/pdc202xx_new.c
delete mode 100644 drivers/ide/pdc202xx_old.c
delete mode 100644 drivers/ide/piix.c
delete mode 100644 drivers/ide/pmac.c
delete mode 100644 drivers/ide/qd65xx.c
delete mode 100644 drivers/ide/qd65xx.h
delete mode 100644 drivers/ide/rapide.c
delete mode 100644 drivers/ide/rz1000.c
delete mode 100644 drivers/ide/sc1200.c
delete mode 100644 drivers/ide/serverworks.c
delete mode 100644 drivers/ide/setup-pci.c
delete mode 100644 drivers/ide/siimage.c
delete mode 100644 drivers/ide/sis5513.c
delete mode 100644 drivers/ide/sl82c105.c
delete mode 100644 drivers/ide/slc90e66.c
delete mode 100644 drivers/ide/tc86c001.c
delete mode 100644 drivers/ide/triflex.c
delete mode 100644 drivers/ide/trm290.c
delete mode 100644 drivers/ide/tx4938ide.c
delete mode 100644 drivers/ide/tx4939ide.c
delete mode 100644 drivers/ide/umc8672.c
delete mode 100644 drivers/ide/via82cxxx.c
delete mode 100644 include/linux/ide.h
diff --git a/Documentation/userspace-api/ioctl/hdio.rst b/Documentation/userspace-api/ioctl/hdio.rst
index 817371bf94e9..6ee8fc88699f 100644
--- a/Documentation/userspace-api/ioctl/hdio.rst
+++ b/Documentation/userspace-api/ioctl/hdio.rst
@@ -7,8 +7,8 @@ Summary of `HDIO_` ioctl calls
November, 2004
This document attempts to describe the ioctl(2) calls supported by
-the HD/IDE layer. These are by-and-large implemented (as of Linux 2.6)
-in drivers/ide/ide.c and drivers/block/scsi_ioctl.c
+the HD/IDE layer. These are by-and-large implemented (as of Linux 5.11)
+drivers/ata/libata-scsi.c.
ioctl values are listed in <linux/hdreg.h>. As of this writing, they
are as follows:
@@ -17,50 +17,17 @@ are as follows:
======================= =======================================
HDIO_GETGEO get device geometry
- HDIO_GET_UNMASKINTR get current unmask setting
- HDIO_GET_MULTCOUNT get current IDE blockmode setting
- HDIO_GET_QDMA get use-qdma flag
- HDIO_SET_XFER set transfer rate via proc
- HDIO_OBSOLETE_IDENTITY OBSOLETE, DO NOT USE
- HDIO_GET_KEEPSETTINGS get keep-settings-on-reset flag
HDIO_GET_32BIT get current io_32bit setting
- HDIO_GET_NOWERR get ignore-write-error flag
- HDIO_GET_DMA get use-dma flag
- HDIO_GET_NICE get nice flags
HDIO_GET_IDENTITY get IDE identification info
- HDIO_GET_WCACHE get write cache mode on|off
- HDIO_GET_ACOUSTIC get acoustic value
- HDIO_GET_ADDRESS get sector addressing mode
- HDIO_GET_BUSSTATE get the bus state of the hwif
- HDIO_TRISTATE_HWIF execute a channel tristate
- HDIO_DRIVE_RESET execute a device reset
HDIO_DRIVE_TASKFILE execute raw taskfile
HDIO_DRIVE_TASK execute task and special drive command
HDIO_DRIVE_CMD execute a special drive command
- HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK
======================= =======================================
ioctls that pass non-pointer values:
======================= =======================================
- HDIO_SET_MULTCOUNT change IDE blockmode
- HDIO_SET_UNMASKINTR permit other irqs during I/O
- HDIO_SET_KEEPSETTINGS keep ioctl settings on reset
HDIO_SET_32BIT change io_32bit flags
- HDIO_SET_NOWERR change ignore-write-error flag
- HDIO_SET_DMA change use-dma flag
- HDIO_SET_PIO_MODE reconfig interface to new speed
- HDIO_SCAN_HWIF register and (re)scan interface
- HDIO_SET_NICE set nice flags
- HDIO_UNREGISTER_HWIF unregister interface
- HDIO_SET_WCACHE change write cache enable-disable
- HDIO_SET_ACOUSTIC change acoustic behavior
- HDIO_SET_BUSSTATE set the bus state of the hwif
- HDIO_SET_QDMA change use-qdma flag
- HDIO_SET_ADDRESS change lba addressing modes
-
- HDIO_SET_IDE_SCSI Set scsi emulation mode on/off
- HDIO_SET_SCSI_IDE not implemented yet
======================= =======================================
@@ -137,512 +104,49 @@ HDIO_GETGEO
-
-HDIO_GET_UNMASKINTR
- get current unmask setting
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_UNMASKINTR, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the drive's current unmask setting
-
-
-
-
-
-HDIO_SET_UNMASKINTR
- permit other irqs during I/O
-
-
- usage::
-
- unsigned long val;
-
- ioctl(fd, HDIO_SET_UNMASKINTR, val);
-
- inputs:
- New value for unmask flag
-
-
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 1]
- - EBUSY Controller busy
-
-
-
-
-HDIO_GET_MULTCOUNT
- get current IDE blockmode setting
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_MULTCOUNT, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current IDE block mode setting. This
- controls how many sectors the drive will transfer per
- interrupt.
-
-
-
-HDIO_SET_MULTCOUNT
- change IDE blockmode
-
-
- usage::
-
- int val;
-
- ioctl(fd, HDIO_SET_MULTCOUNT, val);
-
- inputs:
- New value for IDE block mode setting. This controls how many
- sectors the drive will transfer per interrupt.
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range supported by disk.
- - EBUSY Controller busy or blockmode already set.
- - EIO Drive did not accept new block mode.
-
- notes:
- Source code comments read::
-
- This is tightly woven into the driver->do_special cannot
- touch. DON'T do it again until a total personality rewrite
- is committed.
-
- If blockmode has already been set, this ioctl will fail with
- -EBUSY
-
-
-
-HDIO_GET_QDMA
- get use-qdma flag
-
-
- Not implemented, as of 2.6.8.1
-
-
-
-HDIO_SET_XFER
- set transfer rate via proc
-
-
- Not implemented, as of 2.6.8.1
-
-
-
-HDIO_OBSOLETE_IDENTITY
- OBSOLETE, DO NOT USE
-
-
- Same as HDIO_GET_IDENTITY (see below), except that it only
- returns the first 142 bytes of drive identity information.
-
-
-
-HDIO_GET_IDENTITY
- get IDE identification info
-
-
- usage::
-
- unsigned char identity[512];
-
- ioctl(fd, HDIO_GET_IDENTITY, identity);
-
- inputs:
- none
-
-
-
- outputs:
- ATA drive identity information. For full description, see
- the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in
- the ATA specification.
-
- error returns:
- - EINVAL Called on a partition instead of the whole disk device
- - ENOMSG IDENTIFY DEVICE information not available
-
- notes:
- Returns information that was obtained when the drive was
- probed. Some of this information is subject to change, and
- this ioctl does not re-probe the drive to update the
- information.
-
- This information is also available from /proc/ide/hdX/identify
-
-
-
-HDIO_GET_KEEPSETTINGS
- get keep-settings-on-reset flag
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_KEEPSETTINGS, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current "keep settings" flag
-
-
-
- notes:
- When set, indicates that kernel should restore settings
- after a drive reset.
-
-
-
-HDIO_SET_KEEPSETTINGS
- keep ioctl settings on reset
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_SET_KEEPSETTINGS, val);
-
- inputs:
- New value for keep_settings flag
-
-
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 1]
- - EBUSY Controller busy
-
-
-
-HDIO_GET_32BIT
- get current io_32bit setting
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_32BIT, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current io_32bit setting
-
-
-
- notes:
- 0=16-bit, 1=32-bit, 2,3 = 32bit+sync
-
-
-
-
-
-HDIO_GET_NOWERR
- get ignore-write-error flag
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_NOWERR, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current ignore-write-error flag
-
-
-
-
-
-HDIO_GET_DMA
- get use-dma flag
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_DMA, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current use-dma flag
-
-
-
-
-
-HDIO_GET_NICE
- get nice flags
-
-
- usage::
-
- long nice;
-
- ioctl(fd, HDIO_GET_NICE, &nice);
-
- inputs:
- none
-
-
-
- outputs:
- The drive's "nice" values.
-
-
-
- notes:
- Per-drive flags which determine when the system will give more
- bandwidth to other devices sharing the same IDE bus.
-
- See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP.
-
-
-
-
-HDIO_SET_NICE
- set nice flags
-
-
- usage::
-
- unsigned long nice;
-
- ...
- ioctl(fd, HDIO_SET_NICE, nice);
-
- inputs:
- bitmask of nice flags.
-
-
-
- outputs:
- none
-
-
-
- error returns:
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EPERM Flags other than DSC_OVERLAP and NICE_1 set.
- - EPERM DSC_OVERLAP specified but not supported by drive
-
- notes:
- This ioctl sets the DSC_OVERLAP and NICE_1 flags from values
- provided by the user.
-
- Nice flags are listed in <linux/hdreg.h>, starting with
- IDE_NICE_DSC_OVERLAP. These values represent shifts.
-
-
-
-
-
-HDIO_GET_WCACHE
- get write cache mode on|off
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_WCACHE, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current write cache mode
-
-
-
-
-
-HDIO_GET_ACOUSTIC
- get acoustic value
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_GET_ACOUSTIC, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current acoustic settings
-
-
-
- notes:
- See HDIO_SET_ACOUSTIC
-
-
-
-
-
-HDIO_GET_ADDRESS
- usage::
-
-
- long val;
-
- ioctl(fd, HDIO_GET_ADDRESS, &val);
-
- inputs:
- none
-
-
-
- outputs:
- The value of the current addressing mode:
-
- = ===================
- 0 28-bit
- 1 48-bit
- 2 48-bit doing 28-bit
- 3 64-bit
- = ===================
-
-
-
-HDIO_GET_BUSSTATE
- get the bus state of the hwif
-
-
- usage::
-
- long state;
-
- ioctl(fd, HDIO_SCAN_HWIF, &state);
-
- inputs:
- none
-
-
-
- outputs:
- Current power state of the IDE bus. One of BUSSTATE_OFF,
- BUSSTATE_ON, or BUSSTATE_TRISTATE
-
- error returns:
- - EACCES Access denied: requires CAP_SYS_ADMIN
-
-
-
-
-HDIO_SET_BUSSTATE
- set the bus state of the hwif
+HDIO_GET_IDENTITY
+ get IDE identification info
usage::
- int state;
+ unsigned char identity[512];
- ...
- ioctl(fd, HDIO_SCAN_HWIF, state);
+ ioctl(fd, HDIO_GET_IDENTITY, identity);
inputs:
- Desired IDE power state. One of BUSSTATE_OFF, BUSSTATE_ON,
- or BUSSTATE_TRISTATE
-
- outputs:
none
- error returns:
- - EACCES Access denied: requires CAP_SYS_RAWIO
- - EOPNOTSUPP Hardware interface does not support bus power control
-
-
-
+ outputs:
+ ATA drive identity information. For full description, see
+ the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in
+ the ATA specification.
-HDIO_TRISTATE_HWIF
- execute a channel tristate
+ error returns:
+ - EINVAL Called on a partition instead of the whole disk device
+ - ENOMSG IDENTIFY DEVICE information not available
+ notes:
+ Returns information that was obtained when the drive was
+ probed. Some of this information is subject to change, and
+ this ioctl does not re-probe the drive to update the
+ information.
- Not implemented, as of 2.6.8.1. See HDIO_SET_BUSSTATE
+ This information is also available from /proc/ide/hdX/identify
-HDIO_DRIVE_RESET
- execute a device reset
+HDIO_GET_32BIT
+ get current io_32bit setting
usage::
- int args[3]
+ long val;
- ...
- ioctl(fd, HDIO_DRIVE_RESET, args);
+ ioctl(fd, HDIO_GET_32BIT, &val);
inputs:
none
@@ -650,22 +154,12 @@ HDIO_DRIVE_RESET
outputs:
- none
-
+ The value of the current io_32bit setting
- error returns:
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - ENXIO No such device: phy dead or ctl_addr == 0
- - EIO I/O error: reset timed out or hardware error
notes:
-
- - Execute a reset on the device as soon as the current IO
- operation has completed.
-
- - Executes an ATAPI soft reset if applicable, otherwise
- executes an ATA soft reset on the controller.
+ 0=16-bit, 1=32-bit, 2,3 = 32bit+sync
@@ -1026,14 +520,6 @@ HDIO_DRIVE_TASK
-HDIO_DRIVE_CMD_AEB
- HDIO_DRIVE_TASK
-
-
- Not implemented, as of 2.6.8.1
-
-
-
HDIO_SET_32BIT
change io_32bit flags
@@ -1059,284 +545,3 @@ HDIO_SET_32BIT
- EACCES Access denied: requires CAP_SYS_ADMIN
- EINVAL value out of range [0 3]
- EBUSY Controller busy
-
-
-
-
-HDIO_SET_NOWERR
- change ignore-write-error flag
-
-
- usage::
-
- int val;
-
- ioctl(fd, HDIO_SET_NOWERR, val);
-
- inputs:
- New value for ignore-write-error flag. Used for ignoring
-
-
- WRERR_STAT
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 1]
- - EBUSY Controller busy
-
-
-
-HDIO_SET_DMA
- change use-dma flag
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_SET_DMA, val);
-
- inputs:
- New value for use-dma flag
-
-
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 1]
- - EBUSY Controller busy
-
-
-
-HDIO_SET_PIO_MODE
- reconfig interface to new speed
-
-
- usage::
-
- long val;
-
- ioctl(fd, HDIO_SET_PIO_MODE, val);
-
- inputs:
- New interface speed.
-
-
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 255]
- - EBUSY Controller busy
-
-
-
-HDIO_SCAN_HWIF
- register and (re)scan interface
-
-
- usage::
-
- int args[3]
-
- ...
- ioctl(fd, HDIO_SCAN_HWIF, args);
-
- inputs:
-
- ======= =========================
- args[0] io address to probe
-
-
- args[1] control address to probe
- args[2] irq number
- ======= =========================
-
- outputs:
- none
-
-
-
- error returns:
- - EACCES Access denied: requires CAP_SYS_RAWIO
- - EIO Probe failed.
-
- notes:
- This ioctl initializes the addresses and irq for a disk
- controller, probes for drives, and creates /proc/ide
- interfaces as appropriate.
-
-
-
-HDIO_UNREGISTER_HWIF
- unregister interface
-
-
- usage::
-
- int index;
-
- ioctl(fd, HDIO_UNREGISTER_HWIF, index);
-
- inputs:
- index index of hardware interface to unregister
-
-
-
- outputs:
- none
-
-
-
- error returns:
- - EACCES Access denied: requires CAP_SYS_RAWIO
-
- notes:
- This ioctl removes a hardware interface from the kernel.
-
- Currently (2.6.8) this ioctl silently fails if any drive on
- the interface is busy.
-
-
-
-HDIO_SET_WCACHE
- change write cache enable-disable
-
-
- usage::
-
- int val;
-
- ioctl(fd, HDIO_SET_WCACHE, val);
-
- inputs:
- New value for write cache enable
-
-
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 1]
- - EBUSY Controller busy
-
-
-
-HDIO_SET_ACOUSTIC
- change acoustic behavior
-
-
- usage::
-
- int val;
-
- ioctl(fd, HDIO_SET_ACOUSTIC, val);
-
- inputs:
- New value for drive acoustic settings
-
-
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 254]
- - EBUSY Controller busy
-
-
-
-HDIO_SET_QDMA
- change use-qdma flag
-
-
- Not implemented, as of 2.6.8.1
-
-
-
-HDIO_SET_ADDRESS
- change lba addressing modes
-
-
- usage::
-
- int val;
-
- ioctl(fd, HDIO_SET_ADDRESS, val);
-
- inputs:
- New value for addressing mode
-
- = ===================
- 0 28-bit
- 1 48-bit
- 2 48-bit doing 28-bit
- = ===================
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 2]
- - EBUSY Controller busy
- - EIO Drive does not support lba48 mode.
-
-
-HDIO_SET_IDE_SCSI
- usage::
-
-
- long val;
-
- ioctl(fd, HDIO_SET_IDE_SCSI, val);
-
- inputs:
- New value for scsi emulation mode (?)
-
-
-
- outputs:
- none
-
-
-
- error return:
- - EINVAL Called on a partition instead of the whole disk device
- - EACCES Access denied: requires CAP_SYS_ADMIN
- - EINVAL value out of range [0 1]
- - EBUSY Controller busy
-
-
-
-HDIO_SET_SCSI_IDE
- Not implemented, as of 2.6.8.1
diff --git a/MAINTAINERS b/MAINTAINERS
index 008fcad7ac00..4f3a7e3ce93f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8763,22 +8763,6 @@ L: linux-i2c@...r.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-icy.c
-IDE SUBSYSTEM
-M: "David S. Miller" <davem@...emloft.net>
-L: linux-ide@...r.kernel.org
-S: Maintained
-Q: http://patchwork.ozlabs.org/project/linux-ide/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide.git
-F: Documentation/ide/
-F: drivers/ide/
-F: include/linux/ide.h
-
-IDE/ATAPI DRIVERS
-L: linux-ide@...r.kernel.org
-S: Orphan
-F: Documentation/cdrom/ide-cd.rst
-F: drivers/ide/ide-cd*
-
IDEAPAD LAPTOP EXTRAS DRIVER
M: Ike Panhc <ike.pan@...onical.com>
L: platform-driver-x86@...r.kernel.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 47980c6b1945..8bad63417a50 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -33,8 +33,6 @@ source "drivers/nvme/Kconfig"
source "drivers/misc/Kconfig"
-source "drivers/ide/Kconfig"
-
source "drivers/scsi/Kconfig"
source "drivers/ata/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 5a6d613e868d..f85185f9139e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -78,7 +78,6 @@ obj-$(CONFIG_CXL_BUS) += cxl/
obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
obj-$(CONFIG_NUBUS) += nubus/
obj-y += macintosh/
-obj-$(CONFIG_IDE) += ide/
obj-y += scsi/
obj-y += nvme/
obj-$(CONFIG_ATA) += ata/
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
deleted file mode 100644
index 8af1ac69e5f8..000000000000
--- a/drivers/ide/Kconfig
+++ /dev/null
@@ -1,827 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# IDE ATA ATAPI Block device driver configuration
-#
-
-# Select HAVE_IDE if IDE is supported
-config HAVE_IDE
- bool
-
-menuconfig IDE
- tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
- depends on HAVE_IDE
- depends on BLOCK
- select BLK_SCSI_REQUEST
- help
- If you say Y here, your kernel will be able to manage ATA/(E)IDE and
- ATAPI units. The most common cases are IDE hard drives and ATAPI
- CD-ROM drives.
-
- This subsystem is currently in maintenance mode with only bug fix
- changes applied. Users of ATA hardware are encouraged to migrate to
- the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
- (experimental) drivers") which is more actively maintained.
-
- To compile this driver as a module, choose M here: the
- module will be called ide-core.
-
- For further information, please read <file:Documentation/ide/ide.rst>.
-
- If unsure, say N.
-
-if IDE
-
-comment "Please see Documentation/ide/ide.rst for help/info on IDE drives"
-
-config IDE_XFER_MODE
- bool
-
-config IDE_TIMINGS
- bool
- select IDE_XFER_MODE
-
-config IDE_ATAPI
- bool
-
-config IDE_LEGACY
- bool
-
-config BLK_DEV_IDE_SATA
- bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
- default n
- help
- There are two drivers for Serial ATA controllers.
-
- The main driver, "libata", uses the SCSI subsystem
- and supports most modern SATA controllers. In order to use it
- you may take a look at "Serial ATA (prod) and Parallel ATA
- (experimental) drivers".
-
- The IDE driver (which you are currently configuring) supports
- a few first-generation SATA controllers.
-
- In order to eliminate conflicts between the two subsystems,
- this config option enables the IDE driver's SATA support.
- Normally this is disabled, as it is preferred that libata
- supports SATA controllers, and this (IDE) driver supports
- PATA controllers.
-
- If unsure, say N.
-
-config IDE_GD
- tristate "generic ATA/ATAPI disk support"
- default y
- help
- Support for ATA/ATAPI disks (including ATAPI floppy drives).
-
- To compile this driver as a module, choose M here.
- The module will be called ide-gd_mod.
-
- If unsure, say Y.
-
-config IDE_GD_ATA
- bool "ATA disk support"
- depends on IDE_GD
- default y
- help
- This will include support for ATA hard disks.
-
- If unsure, say Y.
-
-config IDE_GD_ATAPI
- bool "ATAPI floppy support"
- depends on IDE_GD
- select IDE_ATAPI
- help
- This will include support for ATAPI floppy drives
- (i.e. Iomega ZIP or MKE LS-120).
-
- For information about jumper settings and the question
- of when a ZIP drive uses a partition table, see
- <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
-
- If unsure, say N.
-
-config BLK_DEV_IDECS
- tristate "PCMCIA IDE support"
- depends on PCMCIA
- help
- Support for Compact Flash cards, outboard IDE disks, tape drives,
- and CD-ROM drives connected through a PCMCIA card.
-
-config BLK_DEV_DELKIN
- tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
- depends on CARDBUS && PCI
- help
- Support for Delkin, ASKA, and Workbit Cardbus CompactFlash
- Adapters. This may also work for similar SD and XD adapters.
-
-config BLK_DEV_IDECD
- tristate "Include IDE/ATAPI CDROM support"
- depends on BLK_DEV
- select IDE_ATAPI
- select CDROM
- help
- If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
- a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
- SCSI protocol. Most new CD-ROM drives use ATAPI, including the
- NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
- double(2X) or better speed drives.
-
- If you say Y here, the CD-ROM drive will be identified at boot time
- along with other IDE devices, as "hdb" or "hdc", or something
- similar (check the boot messages with dmesg). If this is your only
- CD-ROM drive, you can say N to all other CD-ROM options, but be sure
- to say Y or M to "ISO 9660 CD-ROM file system support".
-
- To compile this driver as a module, choose M here: the
- module will be called ide-cd.
-
-config BLK_DEV_IDECD_VERBOSE_ERRORS
- bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT
- depends on BLK_DEV_IDECD
- default y
- help
- Turn this on to have the driver print out the meanings of the
- ATAPI error codes. This will use up additional 8kB of kernel-space
- memory, though.
-
-config BLK_DEV_IDETAPE
- tristate "Include IDE/ATAPI TAPE support"
- select IDE_ATAPI
- help
- If you have an IDE tape drive using the ATAPI protocol, say Y.
- ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
- similar to the SCSI protocol. If you have an SCSI tape drive
- however, you can say N here.
-
- You should also say Y if you have an OnStream DI-30 tape drive; this
- will not work with the SCSI protocol, until there is support for the
- SC-30 and SC-50 versions.
-
- If you say Y here, the tape drive will be identified at boot time
- along with other IDE devices, as "hdb" or "hdc", or something
- similar, and will be mapped to a character device such as "ht0"
- (check the boot messages with dmesg). Be sure to consult the
- <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.rst>
- files for usage information.
-
- To compile this driver as a module, choose M here: the
- module will be called ide-tape.
-
-config BLK_DEV_IDEACPI
- bool "IDE ACPI support"
- depends on ACPI
- help
- Implement ACPI support for generic IDE devices. On modern
- machines ACPI support is required to properly handle ACPI S3 states.
-
-config IDE_TASK_IOCTL
- bool "IDE Taskfile Access"
- help
- This is a direct raw access to the media. It is a complex but
- elegant solution to test and validate the domain of the hardware and
- perform below the driver data recovery if needed. This is the most
- basic form of media-forensics.
-
- If you are unsure, say N here.
-
-config IDE_PROC_FS
- bool "legacy /proc/ide/ support"
- depends on IDE && PROC_FS
- default y
- help
- This option enables support for the various files in
- /proc/ide. In Linux 2.6 this has been superseded by
- files in sysfs but many legacy applications rely on this.
-
- If unsure say Y.
-
-comment "IDE chipset support/bugfixes"
-
-config IDE_GENERIC
- tristate "generic/default IDE chipset support"
- depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC
- default ARM && ARCH_RPC
- help
- This is the generic IDE driver. This driver attaches to the
- fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
- so on). Please note that if this driver is built into the
- kernel or loaded before other ATA (IDE or libata) drivers
- and the controller is located at legacy ports, this driver
- may grab those ports and thus can prevent the controller
- specific driver from attaching.
-
- Also, currently, IDE generic doesn't allow IRQ sharing
- meaning that the IRQs it grabs won't be available to other
- controllers sharing those IRQs which usually makes drivers
- for those controllers fail. Generally, it's not a good idea
- to load IDE generic driver on modern systems.
-
- If unsure, say N.
-
-config BLK_DEV_PLATFORM
- tristate "Platform driver for IDE interfaces"
- help
- This is the platform IDE driver, used mostly for Memory Mapped
- IDE devices, like Compact Flashes running in True IDE mode.
-
- If unsure, say N.
-
-config BLK_DEV_CMD640
- tristate "CMD640 chipset bugfix/support"
- depends on X86
- select IDE_TIMINGS
- help
- The CMD-Technologies CMD640 IDE chip is used on many common 486 and
- Pentium motherboards, usually in combination with a "Neptune" or
- "SiS" chipset. Unfortunately, it has a number of rather nasty
- design flaws that can cause severe data corruption under many common
- conditions. Say Y here to include code which tries to automatically
- detect and correct the problems under Linux. This option also
- enables access to the secondary IDE ports in some CMD640 based
- systems.
-
- This driver will work automatically in PCI based systems (most new
- systems have PCI slots). But if your system uses VESA local bus
- (VLB) instead of PCI, you must also supply a kernel boot parameter
- to enable the CMD640 bugfix/support: "cmd640.probe_vlb". (Try "man
- bootparam" or see the documentation of your boot loader about how to
- pass options to the kernel.)
-
- The CMD640 chip is also used on add-in cards by Acculogic, and on
- the "CSA-6400E PCI to IDE controller" that some people have. For
- details, read <file:Documentation/ide/ide.rst>.
-
-config BLK_DEV_CMD640_ENHANCED
- bool "CMD640 enhanced support"
- depends on BLK_DEV_CMD640
- help
- This option includes support for setting/autotuning PIO modes and
- prefetch on CMD640 IDE interfaces. For details, read
- <file:Documentation/ide/ide.rst>. If you have a CMD640 IDE interface
- and your BIOS does not already do this for you, then say Y here.
- Otherwise say N.
-
-config BLK_DEV_IDEPNP
- tristate "PNP EIDE support"
- depends on PNP
- help
- If you have a PnP (Plug and Play) compatible EIDE card and
- would like the kernel to automatically detect and activate
- it, say Y here.
-
-config BLK_DEV_IDEDMA_SFF
- bool
-
-if PCI
-
-comment "PCI IDE chipsets support"
-
-config BLK_DEV_IDEPCI
- bool
-
-config IDEPCI_PCIBUS_ORDER
- bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
- depends on IDE=y && BLK_DEV_IDEPCI
- default y
- help
- Probe IDE PCI devices in the order in which they appear on the
- PCI bus (i.e. 00:1f.1 PCI device before 02:01.0 PCI device)
- instead of the order in which IDE PCI host drivers are loaded.
-
- Please note that this method of assuring stable naming of
- IDE devices is unreliable and use other means for achieving
- it (i.e. udev).
-
- If in doubt, say N.
-
-# TODO: split it on per host driver config options (or module parameters)
-config BLK_DEV_OFFBOARD
- bool "Boot off-board chipsets first support (DEPRECATED)"
- depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
- help
- Normally, IDE controllers built into the motherboard (on-board
- controllers) are assigned to ide0 and ide1 while those on add-in PCI
- cards (off-board controllers) are relegated to ide2 and ide3.
- Answering Y here will allow you to reverse the situation, with
- off-board controllers on ide0/1 and on-board controllers on ide2/3.
- This can improve the usability of some boot managers such as lilo
- when booting from a drive on an off-board controller.
-
- Note that, if you do this, the order of the hd* devices will be
- rearranged which may require modification of fstab and other files.
-
- Please also note that this method of assuring stable naming of
- IDE devices is unreliable and use other means for achieving it
- (i.e. udev).
-
- If in doubt, say N.
-
-config BLK_DEV_GENERIC
- tristate "Generic PCI IDE Chipset Support"
- select BLK_DEV_IDEPCI
- help
- This option provides generic support for various PCI IDE Chipsets
- which otherwise might not be supported.
-
-config BLK_DEV_OPTI621
- tristate "OPTi 82C621 chipset enhanced support"
- select BLK_DEV_IDEPCI
- help
- This is a driver for the OPTi 82C621 EIDE controller.
- Please read the comments at the top of <file:drivers/ide/opti621.c>.
-
-config BLK_DEV_RZ1000
- tristate "RZ1000 chipset bugfix/support"
- depends on X86
- select BLK_DEV_IDEPCI
- help
- The PC-Technologies RZ1000 IDE chip is used on many common 486 and
- Pentium motherboards, usually along with the "Neptune" chipset.
- Unfortunately, it has a rather nasty design flaw that can cause
- severe data corruption under many conditions. Say Y here to include
- code which automatically detects and corrects the problem under
- Linux. This may slow disk throughput by a few percent, but at least
- things will operate 100% reliably.
-
-config BLK_DEV_IDEDMA_PCI
- bool
- select BLK_DEV_IDEPCI
- select BLK_DEV_IDEDMA_SFF
-
-config BLK_DEV_AEC62XX
- tristate "AEC62XX chipset support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
- IDE controllers. This allows the kernel to change PIO, DMA and UDMA
- speeds and to configure the chip to optimum performance.
-
-config BLK_DEV_ALI15X3
- tristate "ALI M15x3 chipset support"
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_PCI
- help
- This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
- onboard chipsets. It also tests for Simplex mode and enables
- normal dual channel support.
-
- Please read the comments at the top of
- <file:drivers/ide/alim15x3.c>.
-
- If unsure, say N.
-
-config BLK_DEV_AMD74XX
- tristate "AMD and nVidia IDE support"
- depends on !ARM
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds explicit support for AMD-7xx and AMD-8111 chips
- and also for the nVidia nForce chip. This allows the kernel to
- change PIO, DMA and UDMA speeds and to configure the chip to
- optimum performance.
-
-config BLK_DEV_ATIIXP
- tristate "ATI IXP chipset IDE support"
- depends on X86
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds explicit support for ATI IXP chipset.
- This allows the kernel to change PIO, DMA and UDMA speeds
- and to configure the chip to optimum performance.
-
- Say Y here if you have an ATI IXP chipset IDE controller.
-
-config BLK_DEV_CMD64X
- tristate "CMD64{3|6|8|9} chipset support"
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_PCI
- help
- Say Y here if you have an IDE controller which uses any of these
- chipsets: CMD643, CMD646, or CMD648.
-
-config BLK_DEV_TRIFLEX
- tristate "Compaq Triflex IDE support"
- select BLK_DEV_IDEDMA_PCI
- help
- Say Y here if you have a Compaq Triflex IDE controller, such
- as those commonly found on Compaq Pentium-Pro systems
-
-config BLK_DEV_CY82C693
- tristate "CY82C693 chipset support"
- depends on ALPHA
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds detection and support for the CY82C693 chipset
- used on Digital's PC-Alpha 164SX boards.
-
-config BLK_DEV_CS5520
- tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
- depends on X86_32 || COMPILE_TEST
- select BLK_DEV_IDEDMA_PCI
- help
- Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
- 5510/5520 chipset. This will automatically be detected and
- configured if found.
-
- It is safe to say Y to this question.
-
-config BLK_DEV_CS5530
- tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
- depends on X86_32 || COMPILE_TEST
- select BLK_DEV_IDEDMA_PCI
- help
- Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
- will automatically be detected and configured if found.
-
- It is safe to say Y to this question.
-
-config BLK_DEV_CS5535
- tristate "AMD CS5535 chipset support"
- depends on X86_32
- select BLK_DEV_IDEDMA_PCI
- help
- Include support for UDMA on the NSC/AMD CS5535 companion chipset.
- This will automatically be detected and configured if found.
-
- It is safe to say Y to this question.
-
-config BLK_DEV_CS5536
- tristate "CS5536 chipset support"
- depends on X86_32
- select BLK_DEV_IDEDMA_PCI
- help
- This option enables support for the AMD CS5536
- companion chip used with the Geode LX processor family.
-
- If unsure, say N.
-
-config BLK_DEV_HPT366
- tristate "HPT36X/37X chipset support"
- select BLK_DEV_IDEDMA_PCI
- help
- HPT366 is an Ultra DMA chipset for ATA-66.
- HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
- HPT370 is an Ultra DMA chipset for ATA-100.
- HPT372 is an Ultra DMA chipset for ATA-100.
- HPT374 is an Ultra DMA chipset for ATA-100.
-
- This driver adds up to 4 more EIDE devices sharing a single
- interrupt.
-
- The HPT366 chipset in its current form is bootable. One solution
- for this problem are special LILO commands for redirecting the
- reference to device 0x80. The other solution is to say Y to "Boot
- off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
- your mother board has the chipset natively mounted. Regardless one
- should use the fore mentioned option and call at LILO.
-
- This driver requires dynamic tuning of the chipset during the
- ide-probe at boot. It is reported to support DVD II drives, by the
- manufacturer.
-
-config BLK_DEV_JMICRON
- tristate "JMicron JMB36x support"
- select BLK_DEV_IDEDMA_PCI
- help
- Basic support for the JMicron ATA controllers. For full support
- use the libata drivers.
-
-config BLK_DEV_SC1200
- tristate "National SCx200 chipset support"
- depends on X86_32 || COMPILE_TEST
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds support for the on-board IDE controller on the
- National SCx200 series of embedded x86 "Geode" systems.
-
-config BLK_DEV_PIIX
- tristate "Intel PIIX/ICH chipsets support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds explicit support for Intel PIIX and ICH chips.
- This allows the kernel to change PIO, DMA and UDMA speeds and to
- configure the chip to optimum performance.
-
-config BLK_DEV_IT8172
- tristate "IT8172 IDE support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds support for the IDE controller on the
- IT8172 System Controller.
-
-config BLK_DEV_IT8213
- tristate "IT8213 IDE support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds support for the ITE 8213 IDE controller.
-
-config BLK_DEV_IT821X
- tristate "IT821X IDE support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds support for the ITE 8211 IDE controller and the
- IT 8212 IDE RAID controller in both RAID and pass-through mode.
-
-config BLK_DEV_NS87415
- tristate "NS87415 chipset support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds detection and support for the NS87415 chip
- (used mainly on SPARC64 and PA-RISC machines).
-
- Please read the comments at the top of <file:drivers/ide/ns87415.c>.
-
-config BLK_DEV_PDC202XX_OLD
- tristate "PROMISE PDC202{46|62|65|67} support"
- select BLK_DEV_IDEDMA_PCI
- help
- Promise Ultra33 or PDC20246
- Promise Ultra66 or PDC20262
- Promise Ultra100 or PDC20265/PDC20267/PDC20268
-
- This driver adds up to 4 more EIDE devices sharing a single
- interrupt. This add-on card is a bootable PCI UDMA controller. Since
- multiple cards can be installed and there are BIOS ROM problems that
- happen if the BIOS revisions of all installed cards (three-max) do
- not match, the driver attempts to do dynamic tuning of the chipset
- at boot-time for max-speed. Ultra33 BIOS 1.25 or newer is required
- for more than one card.
-
- Please read the comments at the top of
- <file:drivers/ide/pdc202xx_old.c>.
-
- If unsure, say N.
-
-config BLK_DEV_PDC202XX_NEW
- tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
- select BLK_DEV_IDEDMA_PCI
-
-config BLK_DEV_SVWKS
- tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
- chipsets.
-
-config BLK_DEV_SIIMAGE
- tristate "Silicon Image chipset support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds PIO/(U)DMA support for the SI CMD680 and SII
- 3112 (Serial ATA) chips.
-
-config BLK_DEV_SIS5513
- tristate "SiS5513 chipset support"
- depends on X86
- select BLK_DEV_IDEDMA_PCI
- help
- This driver ensures (U)DMA support for SIS5513 chipset family based
- mainboards.
-
- The following chipsets are supported:
- ATA16: SiS5511, SiS5513
- ATA33: SiS5591, SiS5597, SiS5598, SiS5600
- ATA66: SiS530, SiS540, SiS620, SiS630, SiS640
- ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
- SiS745, SiS750
-
- Please read the comments at the top of <file:drivers/ide/sis5513.c>.
-
-config BLK_DEV_SL82C105
- tristate "Winbond SL82c105 support"
- depends on (PPC || ARM)
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_PCI
- help
- If you have a Winbond SL82c105 IDE controller, say Y here to enable
- special configuration for this chip. This is common on various CHRP
- motherboards, but could be used elsewhere. If in doubt, say Y.
-
-config BLK_DEV_SLC90E66
- tristate "SLC90E66 chipset support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver ensures (U)DMA support for Victory66 SouthBridges for
- SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
- The nice thing about it is that you can mix Ultra/DMA/PIO devices
- and it will handle timing cycles. Since this is an improved
- look-a-like to the PIIX4 it should be a nice addition.
-
- Please read the comments at the top of
- <file:drivers/ide/slc90e66.c>.
-
-config BLK_DEV_TRM290
- tristate "Tekram TRM290 chipset support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds support for bus master DMA transfers
- using the Tekram TRM290 PCI IDE chip. Volunteers are
- needed for further tweaking and development.
- Please read the comments at the top of <file:drivers/ide/trm290.c>.
-
-config BLK_DEV_VIA82CXXX
- tristate "VIA82CXXX chipset support"
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds explicit support for VIA BusMastering IDE chips.
- This allows the kernel to change PIO, DMA and UDMA speeds and to
- configure the chip to optimum performance.
-
-config BLK_DEV_TC86C001
- tristate "Toshiba TC86C001 support"
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds support for Toshiba TC86C001 GOKU-S chip.
-
-endif
-
-# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
-config BLK_DEV_IDE_PMAC
- tristate "PowerMac on-board IDE support"
- depends on PPC_PMAC
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_PCI
- help
- This driver provides support for the on-board IDE controller on
- most of the recent Apple Power Macintoshes and PowerBooks.
- If unsure, say Y.
-
-config BLK_DEV_IDE_PMAC_ATA100FIRST
- bool "Probe on-board ATA/100 (Kauai) first"
- depends on BLK_DEV_IDE_PMAC
- help
- This option will cause the ATA/100 controller found in UniNorth2
- based machines (Windtunnel PowerMac, Aluminium PowerBooks, ...)
- to be probed before the ATA/66 and ATA/33 controllers. Without
- these, those machine used to have the hard disk on hdc and the
- CD-ROM on hda. This option changes this to more natural hda for
- hard disk and hdc for CD-ROM.
-
-config BLK_DEV_IDE_TX4938
- tristate "TX4938 internal IDE support"
- depends on SOC_TX4938
- select IDE_TIMINGS
-
-config BLK_DEV_IDE_TX4939
- tristate "TX4939 internal IDE support"
- depends on SOC_TX4939
- select BLK_DEV_IDEDMA_SFF
-
-config BLK_DEV_IDE_ICSIDE
- tristate "ICS IDE interface support"
- depends on ARM && ARCH_ACORN
- help
- On Acorn systems, say Y here if you wish to use the ICS IDE
- interface card. This is not required for ICS partition support.
- If you are unsure, say N to this.
-
-config BLK_DEV_IDEDMA_ICS
- bool "ICS DMA support"
- depends on BLK_DEV_IDE_ICSIDE
- help
- Say Y here if you want to add DMA (Direct Memory Access) support to
- the ICS IDE driver.
-
-config BLK_DEV_IDE_RAPIDE
- tristate "RapIDE interface support"
- depends on ARM && ARCH_ACORN
- help
- Say Y here if you want to support the Yellowstone RapIDE controller
- manufactured for use with Acorn computers.
-
-config BLK_DEV_GAYLE
- tristate "Amiga Gayle IDE interface support"
- depends on AMIGA
- help
- This is the IDE driver for the Amiga Gayle IDE interface. It supports
- both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
- This includes on-board IDE interfaces on some Amiga models (A600,
- A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
- bus (M-Tech E-Matrix 530 expansion card).
-
- It also provides support for the so-called `IDE doublers' (made
- by various manufacturers, e.g. Eyetech) that can be connected to
- the on-board IDE interface of some Amiga models. Using such an IDE
- doubler, you can connect up to four instead of two IDE devices to
- the Amiga's on-board IDE interface. The feature is enabled at kernel
- runtime using the "gayle.doubler" kernel boot parameter.
-
- Say Y if you have an Amiga with a Gayle IDE interface and want to use
- IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
- it.
-
- Note that you also have to enable Zorro bus support if you want to
- use Gayle IDE interfaces on the Zorro expansion bus.
-
-config BLK_DEV_BUDDHA
- tristate "Buddha/Catweasel/X-Surf IDE interface support"
- depends on ZORRO
- help
- This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
- and X-Surf expansion boards. It supports up to two interfaces on the
- Buddha, three on the Catweasel and two on the X-Surf.
-
- Say Y if you have a Buddha or Catweasel expansion board and want to
- use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
- to one of its IDE interfaces.
-
-config BLK_DEV_FALCON_IDE
- tristate "Falcon and Q40/Q60 IDE interface support"
- depends on ATARI || Q40
- help
- This is the IDE driver for the on-board IDE interface on the Atari
- Falcon and Q40/Q60. Say Y if you have such a machine and want to use
- IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
- the on-board IDE interface.
-
-config BLK_DEV_PALMCHIP_BK3710
- tristate "Palmchip bk3710 IDE controller support"
- depends on ARCH_DAVINCI
- select IDE_TIMINGS
- select BLK_DEV_IDEDMA_SFF
- help
- Say Y here if you want to support the onchip IDE controller on the
- TI DaVinci SoC
-
-# no isa -> no vlb
-if ISA && (ALPHA || X86 || MIPS)
-
-comment "Other IDE chipsets support"
-comment "Note: most of these also require special kernel boot parameters"
-
-config BLK_DEV_4DRIVES
- tristate "Generic 4 drives/port support"
- help
- Certain older chipsets, including the Tekram 690CD, use a single set
- of I/O ports at 0x1f0 to control up to four drives, instead of the
- customary two drives per port. Support for this can be enabled at
- runtime using the "ide-4drives.probe" kernel boot parameter if you
- say Y here.
-
-config BLK_DEV_ALI14XX
- tristate "ALI M14xx support"
- select IDE_TIMINGS
- select IDE_LEGACY
- help
- This driver is enabled at runtime using the "ali14xx.probe" kernel
- boot parameter. It enables support for the secondary IDE interface
- of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
- I/O speeds to be set as well.
- See the files <file:Documentation/ide/ide.rst> and
- <file:drivers/ide/ali14xx.c> for more info.
-
-config BLK_DEV_DTC2278
- tristate "DTC-2278 support"
- select IDE_XFER_MODE
- select IDE_LEGACY
- help
- This driver is enabled at runtime using the "dtc2278.probe" kernel
- boot parameter. It enables support for the secondary IDE interface
- of the DTC-2278 card, and permits faster I/O speeds to be set as
- well. See the <file:Documentation/ide/ide.rst> and
- <file:drivers/ide/dtc2278.c> files for more info.
-
-config BLK_DEV_HT6560B
- tristate "Holtek HT6560B support"
- select IDE_TIMINGS
- select IDE_LEGACY
- help
- This driver is enabled at runtime using the "ht6560b.probe" kernel
- boot parameter. It enables support for the secondary IDE interface
- of the Holtek card, and permits faster I/O speeds to be set as well.
- See the <file:Documentation/ide/ide.rst> and
- <file:drivers/ide/ht6560b.c> files for more info.
-
-config BLK_DEV_QD65XX
- tristate "QDI QD65xx support"
- select IDE_TIMINGS
- select IDE_LEGACY
- help
- This driver is enabled at runtime using the "qd65xx.probe" kernel
- boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide/ide.rst> and <file:drivers/ide/qd65xx.c>
- for more info.
-
-config BLK_DEV_UMC8672
- tristate "UMC-8672 support"
- select IDE_XFER_MODE
- select IDE_LEGACY
- help
- This driver is enabled at runtime using the "umc8672.probe" kernel
- boot parameter. It enables support for the secondary IDE interface
- of the UMC-8672, and permits faster I/O speeds to be set as well.
- See the files <file:Documentation/ide/ide.rst> and
- <file:drivers/ide/umc8672.c> for more info.
-
-endif
-
-config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_ICS
- select IDE_XFER_MODE
-
-endif # IDE
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
deleted file mode 100644
index 991eb72a786b..000000000000
--- a/drivers/ide/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# link order is important here
-#
-
-ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
- ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \
- ide-io-std.o ide-eh.o
-
-# core IDE code
-ide-core-$(CONFIG_IDE_XFER_MODE) += ide-pio-blacklist.o ide-xfer-mode.o
-ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
-ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
-ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
-ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
-ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF) += ide-dma-sff.o
-ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
-ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
-ide-core-$(CONFIG_IDE_LEGACY) += ide-legacy.o
-
-obj-$(CONFIG_IDE) += ide-core.o
-
-obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o
-obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o
-obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o
-obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
-obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o
-obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o
-
-obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o
-obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o
-obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o
-
-obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
-obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
-obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
-obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o
-obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
-obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
-obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
-obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o
-obj-$(CONFIG_BLK_DEV_CS5536) += cs5536.o
-obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o
-obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
-obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o
-obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
-obj-$(CONFIG_BLK_DEV_IT8172) += it8172.o
-obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o
-obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o
-obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o
-obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o
-obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o
-obj-$(CONFIG_BLK_DEV_PIIX) += piix.o
-obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o
-obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o
-obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o
-obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o
-obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o
-obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o
-obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o
-obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o
-obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o
-obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o
-
-# Must appear at the end of the block
-obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o
-
-obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o
-
-obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o
-
-obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o
-
-obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
-obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
-
-ide-gd_mod-y += ide-gd.o
-ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
-
-ifeq ($(CONFIG_IDE_GD_ATA), y)
- ide-gd_mod-y += ide-disk.o ide-disk_ioctl.o
-ifeq ($(CONFIG_IDE_PROC_FS), y)
- ide-gd_mod-y += ide-disk_proc.o
-endif
-endif
-
-ifeq ($(CONFIG_IDE_GD_ATAPI), y)
- ide-gd_mod-y += ide-floppy.o ide-floppy_ioctl.o
-ifeq ($(CONFIG_IDE_PROC_FS), y)
- ide-gd_mod-y += ide-floppy_proc.o
-endif
-endif
-
-obj-$(CONFIG_IDE_GD) += ide-gd_mod.o
-obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
-obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
-
-obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o
-
-obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o
-
-obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
-obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
-obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o
-
-obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
-obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c
deleted file mode 100644
index 4c959ce41ba9..000000000000
--- a/drivers/ide/aec62xx.c
+++ /dev/null
@@ -1,331 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1999-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2007 MontaVista Software, Inc. <source@...sta.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "aec62xx"
-
-struct chipset_bus_clock_list_entry {
- u8 xfer_speed;
- u8 chipset_settings;
- u8 ultra_settings;
-};
-
-static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
- { XFER_UDMA_6, 0x31, 0x07 },
- { XFER_UDMA_5, 0x31, 0x06 },
- { XFER_UDMA_4, 0x31, 0x05 },
- { XFER_UDMA_3, 0x31, 0x04 },
- { XFER_UDMA_2, 0x31, 0x03 },
- { XFER_UDMA_1, 0x31, 0x02 },
- { XFER_UDMA_0, 0x31, 0x01 },
-
- { XFER_MW_DMA_2, 0x31, 0x00 },
- { XFER_MW_DMA_1, 0x31, 0x00 },
- { XFER_MW_DMA_0, 0x0a, 0x00 },
- { XFER_PIO_4, 0x31, 0x00 },
- { XFER_PIO_3, 0x33, 0x00 },
- { XFER_PIO_2, 0x08, 0x00 },
- { XFER_PIO_1, 0x0a, 0x00 },
- { XFER_PIO_0, 0x00, 0x00 },
- { 0, 0x00, 0x00 }
-};
-
-static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
- { XFER_UDMA_6, 0x41, 0x06 },
- { XFER_UDMA_5, 0x41, 0x05 },
- { XFER_UDMA_4, 0x41, 0x04 },
- { XFER_UDMA_3, 0x41, 0x03 },
- { XFER_UDMA_2, 0x41, 0x02 },
- { XFER_UDMA_1, 0x41, 0x01 },
- { XFER_UDMA_0, 0x41, 0x01 },
-
- { XFER_MW_DMA_2, 0x41, 0x00 },
- { XFER_MW_DMA_1, 0x42, 0x00 },
- { XFER_MW_DMA_0, 0x7a, 0x00 },
- { XFER_PIO_4, 0x41, 0x00 },
- { XFER_PIO_3, 0x43, 0x00 },
- { XFER_PIO_2, 0x78, 0x00 },
- { XFER_PIO_1, 0x7a, 0x00 },
- { XFER_PIO_0, 0x70, 0x00 },
- { 0, 0x00, 0x00 }
-};
-
-/*
- * TO DO: active tuning and correction of cards without a bios.
- */
-static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
-{
- for ( ; chipset_table->xfer_speed ; chipset_table++)
- if (chipset_table->xfer_speed == speed) {
- return chipset_table->chipset_settings;
- }
- return chipset_table->chipset_settings;
-}
-
-static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
-{
- for ( ; chipset_table->xfer_speed ; chipset_table++)
- if (chipset_table->xfer_speed == speed) {
- return chipset_table->ultra_settings;
- }
- return chipset_table->ultra_settings;
-}
-
-static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
- u16 d_conf = 0;
- u8 ultra = 0, ultra_conf = 0;
- u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
- const u8 speed = drive->dma_mode;
- unsigned long flags;
-
- local_irq_save(flags);
- /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
- pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
- tmp0 = pci_bus_clock_list(speed, bus_clock);
- d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
- pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
-
- tmp1 = 0x00;
- tmp2 = 0x00;
- pci_read_config_byte(dev, 0x54, &ultra);
- tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
- ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
- tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
- pci_write_config_byte(dev, 0x54, tmp2);
- local_irq_restore(flags);
-}
-
-static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
- u8 unit = drive->dn & 1;
- u8 tmp1 = 0, tmp2 = 0;
- u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
- const u8 speed = drive->dma_mode;
- unsigned long flags;
-
- local_irq_save(flags);
- /* high 4-bits: Active, low 4-bits: Recovery */
- pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
- drive_conf = pci_bus_clock_list(speed, bus_clock);
- pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
-
- pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
- tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
- ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
- tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
- pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
- local_irq_restore(flags);
-}
-
-static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- hwif->port_ops->set_dma_mode(hwif, drive);
-}
-
-static int init_chipset_aec62xx(struct pci_dev *dev)
-{
- /* These are necessary to get AEC6280 Macintosh cards to work */
- if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
- (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
- u8 reg49h = 0, reg4ah = 0;
- /* Clear reset and test bits. */
- pci_read_config_byte(dev, 0x49, ®49h);
- pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
- /* Enable chip interrupt output. */
- pci_read_config_byte(dev, 0x4a, ®4ah);
- pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
- /* Enable burst mode. */
- pci_read_config_byte(dev, 0x4a, ®4ah);
- pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
- }
-
- return 0;
-}
-
-static u8 atp86x_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x49, &ata66);
-
- return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static const struct ide_port_ops atp850_port_ops = {
- .set_pio_mode = aec_set_pio_mode,
- .set_dma_mode = aec6210_set_mode,
-};
-
-static const struct ide_port_ops atp86x_port_ops = {
- .set_pio_mode = aec_set_pio_mode,
- .set_dma_mode = aec6260_set_mode,
- .cable_detect = atp86x_cable_detect,
-};
-
-static const struct ide_port_info aec62xx_chipsets[] = {
- { /* 0: AEC6210 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .port_ops = &atp850_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_NO_DSC |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
- },
- { /* 1: AEC6260 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
- },
- { /* 2: AEC6260R */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_NON_BOOTABLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
- },
- { /* 3: AEC6280 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 4: AEC6280R */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- }
-};
-
-/**
- * aec62xx_init_one - called when a AEC is found
- * @dev: the aec62xx device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- *
- * NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
- * chips, pass a local copy of 'struct ide_port_info' down the call chain.
- */
-
-static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct chipset_bus_clock_list_entry *bus_clock;
- struct ide_port_info d;
- u8 idx = id->driver_data;
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- int err;
-
- if (bus_speed <= 33)
- bus_clock = aec6xxx_33_base;
- else
- bus_clock = aec6xxx_34_base;
-
- err = pci_enable_device(dev);
- if (err)
- return err;
-
- d = aec62xx_chipsets[idx];
-
- if (idx == 3 || idx == 4) {
- unsigned long dma_base = pci_resource_start(dev, 4);
-
- if (inb(dma_base + 2) & 0x10) {
- printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected"
- "\n", pci_name(dev), (idx == 4) ? "R" : "");
- d.udma_mask = ATA_UDMA6;
- }
- }
-
- err = ide_pci_init_one(dev, &d, (void *)bus_clock);
- if (err)
- pci_disable_device(dev);
-
- return err;
-}
-
-static void aec62xx_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id aec62xx_pci_tbl[] = {
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
-
-static struct pci_driver aec62xx_pci_driver = {
- .name = "AEC62xx_IDE",
- .id_table = aec62xx_pci_tbl,
- .probe = aec62xx_init_one,
- .remove = aec62xx_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init aec62xx_ide_init(void)
-{
- return ide_pci_register_driver(&aec62xx_pci_driver);
-}
-
-static void __exit aec62xx_ide_exit(void)
-{
- pci_unregister_driver(&aec62xx_pci_driver);
-}
-
-module_init(aec62xx_ide_init);
-module_exit(aec62xx_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c
deleted file mode 100644
index 3268931c2c7a..000000000000
--- a/drivers/ide/ali14xx.c
+++ /dev/null
@@ -1,250 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1996 Linus Torvalds & author (see below)
- */
-
-/*
- * ALI M14xx chipset EIDE controller
- *
- * Works for ALI M1439/1443/1445/1487/1489 chipsets.
- *
- * Adapted from code developed by derekn@...ece.cmu.edu. -ml
- * Derek's notes follow:
- *
- * I think the code should be pretty understandable,
- * but I'll be happy to (try to) answer questions.
- *
- * The critical part is in the setupDrive function. The initRegisters
- * function doesn't seem to be necessary, but the DOS driver does it, so
- * I threw it in.
- *
- * I've only tested this on my system, which only has one disk. I posted
- * it to comp.sys.linux.hardware, so maybe some other people will try it
- * out.
- *
- * Derek Noonburg (derekn@....cmu.edu)
- * 95-sep-26
- *
- * Update 96-jul-13:
- *
- * I've since upgraded to two disks and a CD-ROM, with no trouble, and
- * I've also heard from several others who have used it successfully.
- * This driver appears to work with both the 1443/1445 and the 1487/1489
- * chipsets. I've added support for PIO mode 4 for the 1487. This
- * seems to work just fine on the 1443 also, although I'm not sure it's
- * advertised as supporting mode 4. (I've been running a WDC AC21200 in
- * mode 4 for a while now with no trouble.) -Derek
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "ali14xx"
-
-/* port addresses for auto-detection */
-#define ALI_NUM_PORTS 4
-static const int ports[ALI_NUM_PORTS] __initconst =
- { 0x074, 0x0f4, 0x034, 0x0e4 };
-
-/* register initialization data */
-typedef struct { u8 reg, data; } RegInitializer;
-
-static const RegInitializer initData[] __initconst = {
- {0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
- {0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
- {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
- {0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
- {0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
- {0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
- {0x35, 0x03}, {0x00, 0x00}
-};
-
-/* timing parameter registers for each drive */
-static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
- {0x03, 0x26, 0x04, 0x27}, /* drive 0 */
- {0x05, 0x28, 0x06, 0x29}, /* drive 1 */
- {0x2b, 0x30, 0x2c, 0x31}, /* drive 2 */
- {0x2d, 0x32, 0x2e, 0x33}, /* drive 3 */
-};
-
-static int basePort; /* base port address */
-static int regPort; /* port for register number */
-static int dataPort; /* port for register data */
-static u8 regOn; /* output to base port to access registers */
-static u8 regOff; /* output to base port to close registers */
-
-/*------------------------------------------------------------------------*/
-
-/*
- * Read a controller register.
- */
-static inline u8 inReg(u8 reg)
-{
- outb_p(reg, regPort);
- return inb(dataPort);
-}
-
-/*
- * Write a controller register.
- */
-static void outReg(u8 data, u8 reg)
-{
- outb_p(reg, regPort);
- outb_p(data, dataPort);
-}
-
-static DEFINE_SPINLOCK(ali14xx_lock);
-
-/*
- * Set PIO mode for the specified drive.
- * This function computes timing parameters
- * and sets controller registers accordingly.
- */
-static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- int driveNum;
- int time1, time2;
- u8 param1, param2, param3, param4;
- unsigned long flags;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-
- /* calculate timing, according to PIO mode */
- time1 = ide_pio_cycle_time(drive, pio);
- time2 = t->active;
- param3 = param1 = (time2 * bus_speed + 999) / 1000;
- param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
- if (pio < 3) {
- param3 += 8;
- param4 += 8;
- }
- printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
- drive->name, pio, time1, time2, param1, param2, param3, param4);
-
- /* stuff timing parameters into controller registers */
- driveNum = (drive->hwif->index << 1) + (drive->dn & 1);
- spin_lock_irqsave(&ali14xx_lock, flags);
- outb_p(regOn, basePort);
- outReg(param1, regTab[driveNum].reg1);
- outReg(param2, regTab[driveNum].reg2);
- outReg(param3, regTab[driveNum].reg3);
- outReg(param4, regTab[driveNum].reg4);
- outb_p(regOff, basePort);
- spin_unlock_irqrestore(&ali14xx_lock, flags);
-}
-
-/*
- * Auto-detect the IDE controller port.
- */
-static int __init findPort(void)
-{
- int i;
- u8 t;
- unsigned long flags;
-
- local_irq_save(flags);
- for (i = 0; i < ALI_NUM_PORTS; ++i) {
- basePort = ports[i];
- regOff = inb(basePort);
- for (regOn = 0x30; regOn <= 0x33; ++regOn) {
- outb_p(regOn, basePort);
- if (inb(basePort) == regOn) {
- regPort = basePort + 4;
- dataPort = basePort + 8;
- t = inReg(0) & 0xf0;
- outb_p(regOff, basePort);
- local_irq_restore(flags);
- if (t != 0x50)
- return 0;
- return 1; /* success */
- }
- }
- outb_p(regOff, basePort);
- }
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * Initialize controller registers with default values.
- */
-static int __init initRegisters(void)
-{
- const RegInitializer *p;
- u8 t;
- unsigned long flags;
-
- local_irq_save(flags);
- outb_p(regOn, basePort);
- for (p = initData; p->reg != 0; ++p)
- outReg(p->data, p->reg);
- outb_p(0x01, regPort);
- t = inb(regPort) & 0x01;
- outb_p(regOff, basePort);
- local_irq_restore(flags);
- return t;
-}
-
-static const struct ide_port_ops ali14xx_port_ops = {
- .set_pio_mode = ali14xx_set_pio_mode,
-};
-
-static const struct ide_port_info ali14xx_port_info = {
- .name = DRV_NAME,
- .chipset = ide_ali14xx,
- .port_ops = &ali14xx_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
-};
-
-static int __init ali14xx_probe(void)
-{
- printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
- basePort, regOn);
-
- /* initialize controller registers */
- if (!initRegisters()) {
- printk(KERN_ERR "ali14xx: Chip initialization failed.\n");
- return 1;
- }
-
- return ide_legacy_device_add(&ali14xx_port_info, 0);
-}
-
-static bool probe_ali14xx;
-
-module_param_named(probe, probe_ali14xx, bool, 0);
-MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
-
-static int __init ali14xx_init(void)
-{
- if (probe_ali14xx == 0)
- goto out;
-
- /* auto-detect IDE controller port */
- if (findPort()) {
- if (ali14xx_probe())
- return -ENODEV;
- return 0;
- }
- printk(KERN_ERR "ali14xx: not found.\n");
-out:
- return -ENODEV;
-}
-
-module_init(ali14xx_init);
-
-MODULE_AUTHOR("see local file");
-MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
deleted file mode 100644
index 3265970aee34..000000000000
--- a/drivers/ide/alim15x3.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/*
- * Copyright (C) 1998-2000 Michel Aubry, Maintainer
- * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
- * Copyright (C) 1999-2000 CJ, cjtsai@....com.tw, Maintainer
- *
- * Copyright (C) 1998-2000 Andre Hedrick (andre@...ux-ide.org)
- * May be copied or modified under the terms of the GNU General Public License
- * Copyright (C) 2002 Alan Cox
- * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@....com.tw>
- * Copyright (C) 2007 MontaVista Software, Inc. <source@...sta.com>
- * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
- *
- * (U)DMA capable version of ali 1533/1543(C), 1535(D)
- *
- **********************************************************************
- * 9/7/99 --Parts from the above author are included and need to be
- * converted into standard interface, once I finish the thought.
- *
- * Recent changes
- * Don't use LBA48 mode on ALi <= 0xC4
- * Don't poke 0x79 with a non ALi northbridge
- * Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang)
- * Allow UDMA6 on revisions > 0xC4
- *
- * Documentation
- * Chipset documentation available under NDA only
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "alim15x3"
-
-/*
- * ALi devices are not plug in. Otherwise these static values would
- * need to go. They ought to go away anyway
- */
-
-static u8 m5229_revision;
-static u8 chip_is_1543c_e;
-static struct pci_dev *isa_dev;
-
-static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- int pio_fifo = 0x54 + hwif->channel;
- u8 fifo;
- int shift = 4 * (drive->dn & 1);
-
- pci_read_config_byte(pdev, pio_fifo, &fifo);
- fifo &= ~(0x0F << shift);
- fifo |= (on << shift);
- pci_write_config_byte(pdev, pio_fifo, fifo);
-}
-
-static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive,
- struct ide_timing *t, u8 ultra)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int port = hwif->channel ? 0x5c : 0x58;
- int udmat = 0x56 + hwif->channel;
- u8 unit = drive->dn & 1, udma;
- int shift = 4 * unit;
-
- /* Set up the UDMA */
- pci_read_config_byte(dev, udmat, &udma);
- udma &= ~(0x0F << shift);
- udma |= ultra << shift;
- pci_write_config_byte(dev, udmat, udma);
-
- if (t == NULL)
- return;
-
- t->setup = clamp_val(t->setup, 1, 8) & 7;
- t->act8b = clamp_val(t->act8b, 1, 8) & 7;
- t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
- t->active = clamp_val(t->active, 1, 8) & 7;
- t->recover = clamp_val(t->recover, 1, 16) & 15;
-
- pci_write_config_byte(dev, port, t->setup);
- pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b);
- pci_write_config_byte(dev, port + unit + 2,
- (t->active << 4) | t->recover);
-}
-
-/**
- * ali_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Program the controller for the given PIO mode.
- */
-
-static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- ide_drive_t *pair = ide_get_pair_dev(drive);
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- unsigned long T = 1000000 / bus_speed; /* PCI clock based */
- struct ide_timing t;
-
- ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
- if (pair) {
- struct ide_timing p;
-
- ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
- ide_timing_merge(&p, &t, &t,
- IDE_TIMING_SETUP | IDE_TIMING_8BIT);
- if (pair->dma_mode) {
- ide_timing_compute(pair, pair->dma_mode, &p, T, 1);
- ide_timing_merge(&p, &t, &t,
- IDE_TIMING_SETUP | IDE_TIMING_8BIT);
- }
- }
-
- /*
- * PIO mode => ATA FIFO on, ATAPI FIFO off
- */
- ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
-
- ali_program_timings(hwif, drive, &t, 0);
-}
-
-/**
- * ali_udma_filter - compute UDMA mask
- * @drive: IDE device
- *
- * Return available UDMA modes.
- *
- * The actual rules for the ALi are:
- * No UDMA on revisions <= 0x20
- * Disk only for revisions < 0xC2
- * Not WDC drives on M1543C-E (?)
- */
-
-static u8 ali_udma_filter(ide_drive_t *drive)
-{
- if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
- if (drive->media != ide_disk)
- return 0;
- if (chip_is_1543c_e &&
- strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
- return 0;
- }
-
- return drive->hwif->ultra_mask;
-}
-
-/**
- * ali_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Configure the hardware for the desired IDE transfer mode.
- */
-
-static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- unsigned long T = 1000000 / bus_speed; /* PCI clock based */
- const u8 speed = drive->dma_mode;
- u8 tmpbyte = 0x00;
- struct ide_timing t;
-
- if (speed < XFER_UDMA_0) {
- ide_timing_compute(drive, drive->dma_mode, &t, T, 1);
- if (pair) {
- struct ide_timing p;
-
- ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
- ide_timing_merge(&p, &t, &t,
- IDE_TIMING_SETUP | IDE_TIMING_8BIT);
- if (pair->dma_mode) {
- ide_timing_compute(pair, pair->dma_mode,
- &p, T, 1);
- ide_timing_merge(&p, &t, &t,
- IDE_TIMING_SETUP | IDE_TIMING_8BIT);
- }
- }
- ali_program_timings(hwif, drive, &t, 0);
- } else {
- ali_program_timings(hwif, drive, NULL,
- udma_timing[speed - XFER_UDMA_0]);
- if (speed >= XFER_UDMA_3) {
- pci_read_config_byte(dev, 0x4b, &tmpbyte);
- tmpbyte |= 1;
- pci_write_config_byte(dev, 0x4b, tmpbyte);
- }
- }
-}
-
-/**
- * ali_dma_check - DMA check
- * @drive: target device
- * @cmd: command
- *
- * Returns 1 if the DMA cannot be performed, zero on success.
- */
-
-static int ali_dma_check(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- if (m5229_revision < 0xC2 && drive->media != ide_disk) {
- if (cmd->tf_flags & IDE_TFLAG_WRITE)
- return 1; /* try PIO instead of DMA */
- }
- return 0;
-}
-
-/**
- * init_chipset_ali15x3 - Initialise an ALi IDE controller
- * @dev: PCI device
- *
- * This function initializes the ALI IDE controller and where
- * appropriate also sets up the 1533 southbridge.
- */
-
-static int init_chipset_ali15x3(struct pci_dev *dev)
-{
- unsigned long flags;
- u8 tmpbyte;
- struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
-
- m5229_revision = dev->revision;
-
- isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
- local_irq_save(flags);
-
- if (m5229_revision < 0xC2) {
- /*
- * revision 0x20 (1543-E, 1543-F)
- * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E)
- * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7
- */
- pci_read_config_byte(dev, 0x4b, &tmpbyte);
- /*
- * clear bit 7
- */
- pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
- /*
- * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
- */
- if (m5229_revision >= 0x20 && isa_dev) {
- pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
- chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
- }
- goto out;
- }
-
- /*
- * 1543C-B?, 1535, 1535D, 1553
- * Note 1: not all "motherboard" support this detection
- * Note 2: if no udma 66 device, the detection may "error".
- * but in this case, we will not set the device to
- * ultra 66, the detection result is not important
- */
-
- /*
- * enable "Cable Detection", m5229, 0x4b, bit3
- */
- pci_read_config_byte(dev, 0x4b, &tmpbyte);
- pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08);
-
- /*
- * We should only tune the 1533 enable if we are using an ALi
- * North bridge. We might have no north found on some zany
- * box without a device at 0:0.0. The ALi bridge will be at
- * 0:0.0 so if we didn't find one we know what is cooking.
- */
- if (north && north->vendor != PCI_VENDOR_ID_AL)
- goto out;
-
- if (m5229_revision < 0xC5 && isa_dev)
- {
- /*
- * set south-bridge's enable bit, m1533, 0x79
- */
-
- pci_read_config_byte(isa_dev, 0x79, &tmpbyte);
- if (m5229_revision == 0xC2) {
- /*
- * 1543C-B0 (m1533, 0x79, bit 2)
- */
- pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04);
- } else if (m5229_revision >= 0xC3) {
- /*
- * 1553/1535 (m1533, 0x79, bit 1)
- */
- pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
- }
- }
-
-out:
- /*
- * CD_ROM DMA on (m5229, 0x53, bit0)
- * Enable this bit even if we want to use PIO.
- * PIO FIFO off (m5229, 0x53, bit1)
- * The hardware will use 0x54h and 0x55h to control PIO FIFO.
- * (Not on later devices it seems)
- *
- * 0x53 changes meaning on later revs - we must no touch
- * bit 1 on them. Need to check if 0x20 is the right break.
- */
- if (m5229_revision >= 0x20) {
- pci_read_config_byte(dev, 0x53, &tmpbyte);
-
- if (m5229_revision <= 0x20)
- tmpbyte = (tmpbyte & (~0x02)) | 0x01;
- else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
- tmpbyte |= 0x03;
- else
- tmpbyte |= 0x01;
-
- pci_write_config_byte(dev, 0x53, tmpbyte);
- }
- local_irq_restore(flags);
- pci_dev_put(north);
- pci_dev_put(isa_dev);
- return 0;
-}
-
-/*
- * Cable special cases
- */
-
-static const struct dmi_system_id cable_dmi_table[] = {
- {
- .ident = "HP Pavilion N5430",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
- },
- },
- {
- .ident = "Toshiba Satellite S1800-814",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
- },
- },
- { }
-};
-
-static int ali_cable_override(struct pci_dev *pdev)
-{
- /* Fujitsu P2000 */
- if (pdev->subsystem_vendor == 0x10CF &&
- pdev->subsystem_device == 0x10AF)
- return 1;
-
- /* Mitac 8317 (Winbook-A) and relatives */
- if (pdev->subsystem_vendor == 0x1071 &&
- pdev->subsystem_device == 0x8317)
- return 1;
-
- /* Systems by DMI */
- if (dmi_check_system(cable_dmi_table))
- return 1;
-
- return 0;
-}
-
-/**
- * ali_cable_detect - cable detection
- * @hwif: IDE interface
- *
- * This checks if the controller and the cable are capable
- * of UDMA66 transfers. It doesn't check the drives.
- */
-
-static u8 ali_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 cbl = ATA_CBL_PATA40, tmpbyte;
-
- if (m5229_revision >= 0xC2) {
- /*
- * m5229 80-pin cable detection (from Host View)
- *
- * 0x4a bit0 is 0 => primary channel has 80-pin
- * 0x4a bit1 is 0 => secondary channel has 80-pin
- *
- * Certain laptops use short but suitable cables
- * and don't implement the detect logic.
- */
- if (ali_cable_override(dev))
- cbl = ATA_CBL_PATA40_SHORT;
- else {
- pci_read_config_byte(dev, 0x4a, &tmpbyte);
- if ((tmpbyte & (1 << hwif->channel)) == 0)
- cbl = ATA_CBL_PATA80;
- }
- }
-
- return cbl;
-}
-
-#ifndef CONFIG_SPARC64
-/**
- * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff
- * @hwif: interface to configure
- *
- * Obtain the IRQ tables for an ALi based IDE solution on the PC
- * class platforms. This part of the code isn't applicable to the
- * Sparc systems.
- */
-
-static void init_hwif_ali15x3(ide_hwif_t *hwif)
-{
- u8 ideic, inmir;
- s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
- 1, 11, 0, 12, 0, 14, 0, 15 };
- int irq = -1;
-
- if (isa_dev) {
- /*
- * read IDE interface control
- */
- pci_read_config_byte(isa_dev, 0x58, &ideic);
-
- /* bit0, bit1 */
- ideic = ideic & 0x03;
-
- /* get IRQ for IDE Controller */
- if ((hwif->channel && ideic == 0x03) ||
- (!hwif->channel && !ideic)) {
- /*
- * get SIRQ1 routing table
- */
- pci_read_config_byte(isa_dev, 0x44, &inmir);
- inmir = inmir & 0x0f;
- irq = irq_routing_table[inmir];
- } else if (hwif->channel && !(ideic & 0x01)) {
- /*
- * get SIRQ2 routing table
- */
- pci_read_config_byte(isa_dev, 0x75, &inmir);
- inmir = inmir & 0x0f;
- irq = irq_routing_table[inmir];
- }
- if(irq >= 0)
- hwif->irq = irq;
- }
-}
-#else
-#define init_hwif_ali15x3 NULL
-#endif /* CONFIG_SPARC64 */
-
-/**
- * init_dma_ali15x3 - set up DMA on ALi15x3
- * @hwif: IDE interface
- * @d: IDE port info
- *
- * Set up the DMA functionality on the ALi 15x3.
- */
-
-static int init_dma_ali15x3(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = ide_pci_dma_base(hwif, d);
-
- if (base == 0)
- return -1;
-
- hwif->dma_base = base;
-
- if (ide_pci_check_simplex(hwif, d) < 0)
- return -1;
-
- if (ide_pci_set_master(dev, d->name) < 0)
- return -1;
-
- if (!hwif->channel)
- outb(inb(base + 2) & 0x60, base + 2);
-
- printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
- hwif->name, base, base + 7);
-
- if (ide_allocate_dma_engine(hwif))
- return -1;
-
- return 0;
-}
-
-static const struct ide_port_ops ali_port_ops = {
- .set_pio_mode = ali_set_pio_mode,
- .set_dma_mode = ali_set_dma_mode,
- .udma_filter = ali_udma_filter,
- .cable_detect = ali_cable_detect,
-};
-
-static const struct ide_dma_ops ali_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_check = ali_dma_check,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info ali15x3_chipset = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_ali15x3,
- .init_hwif = init_hwif_ali15x3,
- .init_dma = init_dma_ali15x3,
- .port_ops = &ali_port_ops,
- .dma_ops = &sff_dma_ops,
- .pio_mask = ATA_PIO5,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-/**
- * alim15x3_init_one - set up an ALi15x3 IDE controller
- * @dev: PCI device to set up
- *
- * Perform the actual set up for an ALi15x3 that has been found by the
- * hot plug layer.
- */
-
-static int alim15x3_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- struct ide_port_info d = ali15x3_chipset;
- u8 rev = dev->revision, idx = id->driver_data;
-
- /* don't use LBA48 DMA on ALi devices before rev 0xC5 */
- if (rev <= 0xC4)
- d.host_flags |= IDE_HFLAG_NO_LBA48_DMA;
-
- if (rev >= 0x20) {
- if (rev == 0x20)
- d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-
- if (rev < 0xC2)
- d.udma_mask = ATA_UDMA2;
- else if (rev == 0xC2 || rev == 0xC3)
- d.udma_mask = ATA_UDMA4;
- else if (rev == 0xC4)
- d.udma_mask = ATA_UDMA5;
- else
- d.udma_mask = ATA_UDMA6;
-
- d.dma_ops = &ali_dma_ops;
- } else {
- d.host_flags |= IDE_HFLAG_NO_DMA;
-
- d.mwdma_mask = d.swdma_mask = 0;
- }
-
- if (idx == 0)
- d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-
-static const struct pci_device_id alim15x3_pci_tbl[] = {
- { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
- { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
-
-static struct pci_driver alim15x3_pci_driver = {
- .name = "ALI15x3_IDE",
- .id_table = alim15x3_pci_tbl,
- .probe = alim15x3_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init ali15x3_ide_init(void)
-{
- return ide_pci_register_driver(&alim15x3_pci_driver);
-}
-
-static void __exit ali15x3_ide_exit(void)
-{
- pci_unregister_driver(&alim15x3_pci_driver);
-}
-
-module_init(ali15x3_ide_init);
-module_exit(ali15x3_ide_exit);
-
-MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
deleted file mode 100644
index 7340597a373e..000000000000
--- a/drivers/ide/amd74xx.c
+++ /dev/null
@@ -1,343 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
- * IDE driver for Linux.
- *
- * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
- *
- * Based on the work of:
- * Andre Hedrick
- */
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "amd74xx"
-
-enum {
- AMD_IDE_CONFIG = 0x41,
- AMD_CABLE_DETECT = 0x42,
- AMD_DRIVE_TIMING = 0x48,
- AMD_8BIT_TIMING = 0x4e,
- AMD_ADDRESS_SETUP = 0x4c,
- AMD_UDMA_TIMING = 0x50,
-};
-
-static unsigned int amd_80w;
-static unsigned int amd_clock;
-
-static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
-static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
-
-static inline u8 amd_offset(struct pci_dev *dev)
-{
- return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
-}
-
-/*
- * amd_set_speed() writes timing values to the chipset registers
- */
-
-static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
- struct ide_timing *timing)
-{
- u8 t = 0, offset = amd_offset(dev);
-
- pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
- pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
-
- pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
- ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
-
- pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
- ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
-
- switch (udma_mask) {
- case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
- case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break;
- case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break;
- case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break;
- default: return;
- }
-
- if (timing->udma)
- pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t);
-}
-
-/*
- * amd_set_drive() computes timing values and configures the chipset
- * to a desired transfer mode. It also can be called by upper layers.
- */
-
-static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- ide_drive_t *peer = ide_get_pair_dev(drive);
- struct ide_timing t, p;
- int T, UT;
- u8 udma_mask = hwif->ultra_mask;
- const u8 speed = drive->dma_mode;
-
- T = 1000000000 / amd_clock;
- UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
-
- ide_timing_compute(drive, speed, &t, T, UT);
-
- if (peer) {
- ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
- ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
- }
-
- if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
- if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
-
- amd_set_speed(dev, drive->dn, udma_mask, &t);
-}
-
-/*
- * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
- */
-
-static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- amd_set_drive(hwif, drive);
-}
-
-static void amd7409_cable_detect(struct pci_dev *dev)
-{
- /* no host side cable detection */
- amd_80w = 0x03;
-}
-
-static void amd7411_cable_detect(struct pci_dev *dev)
-{
- int i;
- u32 u = 0;
- u8 t = 0, offset = amd_offset(dev);
-
- pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
- pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
- amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
- printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
- "cable bits correctly. Enabling workaround.\n",
- pci_name(dev));
- amd_80w |= (1 << (1 - (i >> 4)));
- }
-}
-
-/*
- * The initialization callback. Initialize drive independent registers.
- */
-
-static int init_chipset_amd74xx(struct pci_dev *dev)
-{
- u8 t = 0, offset = amd_offset(dev);
-
-/*
- * Check 80-wire cable presence.
- */
-
- if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
- ; /* no UDMA > 2 */
- else if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
- amd7409_cable_detect(dev);
- else
- amd7411_cable_detect(dev);
-
-/*
- * Take care of prefetch & postwrite.
- */
-
- pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
- /*
- * Check for broken FIFO support.
- */
- if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
- t &= 0x0f;
- else
- t |= 0xf0;
- pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
-
- return 0;
-}
-
-static u8 amd_cable_detect(ide_hwif_t *hwif)
-{
- if ((amd_80w >> hwif->channel) & 1)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops amd_port_ops = {
- .set_pio_mode = amd_set_pio_mode,
- .set_dma_mode = amd_set_drive,
- .cable_detect = amd_cable_detect,
-};
-
-#define IDE_HFLAGS_AMD \
- (IDE_HFLAG_PIO_NO_BLACKLIST | \
- IDE_HFLAG_POST_SET_MODE | \
- IDE_HFLAG_IO_32BIT | \
- IDE_HFLAG_UNMASK_IRQS)
-
-#define DECLARE_AMD_DEV(swdma, udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_amd74xx, \
- .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
- .port_ops = &amd_port_ops, \
- .host_flags = IDE_HFLAGS_AMD, \
- .pio_mask = ATA_PIO5, \
- .swdma_mask = swdma, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- }
-
-#define DECLARE_NV_DEV(udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_amd74xx, \
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
- .port_ops = &amd_port_ops, \
- .host_flags = IDE_HFLAGS_AMD, \
- .pio_mask = ATA_PIO5, \
- .swdma_mask = ATA_SWDMA2, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- }
-
-static const struct ide_port_info amd74xx_chipsets[] = {
- /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2),
- /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
- /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
- /* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),
-
- /* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5),
- /* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6),
-
- /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
-};
-
-static int amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d;
- u8 idx = id->driver_data;
-
- d = amd74xx_chipsets[idx];
-
- /*
- * Check for bad SWDMA and incorrectly wired Serenade mainboards.
- */
- if (idx == 1) {
- if (dev->revision <= 7)
- d.swdma_mask = 0;
- d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
- } else if (idx == 3) {
- if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
- dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
- d.udma_mask = ATA_UDMA5;
- }
-
- /*
- * It seems that on some nVidia controllers using AltStatus
- * register can be unreliable so default to Status register
- * if the device is in Compatibility Mode.
- */
- if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
- ide_pci_is_in_compatibility_mode(dev))
- d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;
-
- printk(KERN_INFO "%s %s: UDMA%s controller\n",
- d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
-
- /*
- * Determine the system bus clock.
- */
- amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
- switch (amd_clock) {
- case 33000: amd_clock = 33333; break;
- case 37000: amd_clock = 37500; break;
- case 41000: amd_clock = 41666; break;
- }
-
- if (amd_clock < 20000 || amd_clock > 50000) {
- printk(KERN_WARNING "%s: User given PCI clock speed impossible"
- " (%d), using 33 MHz instead.\n",
- d.name, amd_clock);
- amd_clock = 33333;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id amd74xx_pci_tbl[] = {
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 },
-#endif
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 },
-#endif
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
-
-static struct pci_driver amd74xx_pci_driver = {
- .name = "AMD_IDE",
- .id_table = amd74xx_pci_tbl,
- .probe = amd74xx_probe,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init amd74xx_ide_init(void)
-{
- return ide_pci_register_driver(&amd74xx_pci_driver);
-}
-
-static void __exit amd74xx_ide_exit(void)
-{
- pci_unregister_driver(&amd74xx_pci_driver);
-}
-
-module_init(amd74xx_ide_init);
-module_exit(amd74xx_ide_exit);
-
-MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("AMD PCI IDE driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
deleted file mode 100644
index e08b0aac08b9..000000000000
--- a/drivers/ide/atiixp.c
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2003 ATI Inc. <hyu@....com>
- * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "atiixp"
-
-#define ATIIXP_IDE_PIO_TIMING 0x40
-#define ATIIXP_IDE_MDMA_TIMING 0x44
-#define ATIIXP_IDE_PIO_CONTROL 0x48
-#define ATIIXP_IDE_PIO_MODE 0x4a
-#define ATIIXP_IDE_UDMA_CONTROL 0x54
-#define ATIIXP_IDE_UDMA_MODE 0x56
-
-struct atiixp_ide_timing {
- u8 command_width;
- u8 recover_width;
-};
-
-static struct atiixp_ide_timing pio_timing[] = {
- { 0x05, 0x0d },
- { 0x04, 0x07 },
- { 0x03, 0x04 },
- { 0x02, 0x02 },
- { 0x02, 0x00 },
-};
-
-static struct atiixp_ide_timing mdma_timing[] = {
- { 0x07, 0x07 },
- { 0x02, 0x01 },
- { 0x02, 0x00 },
-};
-
-static DEFINE_SPINLOCK(atiixp_lock);
-
-/**
- * atiixp_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Set the interface PIO mode.
- */
-
-static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn ^ 1) * 8;
- u32 pio_timing_data;
- u16 pio_mode_data;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
- pio_mode_data &= ~(0x07 << (drive->dn * 4));
- pio_mode_data |= (pio << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
-
- pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
- pio_timing_data &= ~(0xff << timing_shift);
- pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
- (pio_timing[pio].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-/**
- * atiixp_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Set a ATIIXP host controller to the desired DMA mode. This involves
- * programming the right timing data into the PCI configuration space.
- */
-
-static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn ^ 1) * 8;
- u32 tmp32;
- u16 tmp16;
- u16 udma_ctl = 0;
- const u8 speed = drive->dma_mode;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl);
-
- if (speed >= XFER_UDMA_0) {
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
- tmp16 &= ~(0x07 << (drive->dn * 4));
- tmp16 |= ((speed & 0x07) << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
-
- udma_ctl |= (1 << drive->dn);
- } else if (speed >= XFER_MW_DMA_0) {
- u8 i = speed & 0x03;
-
- pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
- tmp32 &= ~(0xff << timing_shift);
- tmp32 |= (mdma_timing[i].recover_width << timing_shift) |
- (mdma_timing[i].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
-
- udma_ctl &= ~(1 << drive->dn);
- }
-
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-static u8 atiixp_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u8 udma_mode = 0, ch = hwif->channel;
-
- pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
- if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops atiixp_port_ops = {
- .set_pio_mode = atiixp_set_pio_mode,
- .set_dma_mode = atiixp_set_dma_mode,
- .cable_detect = atiixp_cable_detect,
-};
-
-static const struct ide_port_info atiixp_pci_info[] = {
- { /* 0: IXP200/300/400/700 */
- .name = DRV_NAME,
- .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
- .port_ops = &atiixp_port_ops,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 1: IXP600 */
- .name = DRV_NAME,
- .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
- .port_ops = &atiixp_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
-};
-
-/**
- * atiixp_init_one - called when a ATIIXP is found
- * @dev: the atiixp device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL);
-}
-
-static const struct pci_device_id atiixp_pci_tbl[] = {
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
-
-static struct pci_driver atiixp_pci_driver = {
- .name = "ATIIXP_IDE",
- .id_table = atiixp_pci_tbl,
- .probe = atiixp_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init atiixp_ide_init(void)
-{
- return ide_pci_register_driver(&atiixp_pci_driver);
-}
-
-static void __exit atiixp_ide_exit(void)
-{
- pci_unregister_driver(&atiixp_pci_driver);
-}
-
-module_init(atiixp_ide_init);
-module_exit(atiixp_ide_exit);
-
-MODULE_AUTHOR("HUI YU");
-MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
deleted file mode 100644
index 46eaf58d881b..000000000000
--- a/drivers/ide/buddha.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Amiga Buddha, Catweasel and X-Surf IDE Driver
- *
- * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
- *
- * This driver was written based on the specifications in README.buddha and
- * the X-Surf info from Inside_XSurf.txt available at
- * http://www.jschoenfeld.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * TODO:
- * - test it :-)
- * - tune the timings using the speed-register
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/zorro.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-
- /*
- * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
- */
-
-#define BUDDHA_NUM_HWIFS 2
-#define CATWEASEL_NUM_HWIFS 3
-#define XSURF_NUM_HWIFS 2
-
-#define MAX_NUM_HWIFS 3
-
- /*
- * Bases of the IDE interfaces (relative to the board address)
- */
-
-#define BUDDHA_BASE1 0x800
-#define BUDDHA_BASE2 0xa00
-#define BUDDHA_BASE3 0xc00
-
-#define XSURF_BASE1 0xb000 /* 2.5" Interface */
-#define XSURF_BASE2 0xd000 /* 3.5" Interface */
-
-static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
- BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
-};
-
-static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
- XSURF_BASE1, XSURF_BASE2
-};
-
- /*
- * Offsets from one of the above bases
- */
-
-#define BUDDHA_CONTROL 0x11a
-
- /*
- * Other registers
- */
-
-#define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */
-#define BUDDHA_IRQ2 0xf40 /* interrupt */
-#define BUDDHA_IRQ3 0xf80
-
-#define XSURF_IRQ1 0x7e
-#define XSURF_IRQ2 0x7e
-
-static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
- BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
-};
-
-static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
- XSURF_IRQ1, XSURF_IRQ2
-};
-
-#define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
-
-
- /*
- * Board information
- */
-
-typedef enum BuddhaType_Enum {
- BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
-} BuddhaType;
-
-static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
-
- /*
- * Check and acknowledge the interrupt status
- */
-
-static int buddha_test_irq(ide_hwif_t *hwif)
-{
- unsigned char ch;
-
- ch = z_readb(hwif->io_ports.irq_addr);
- if (!(ch & 0x80))
- return 0;
- return 1;
-}
-
-static void xsurf_clear_irq(ide_drive_t *drive)
-{
- /*
- * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
- */
- z_writeb(0, drive->hwif->io_ports.irq_addr);
-}
-
-static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
- unsigned long ctl, unsigned long irq_port)
-{
- int i;
-
- memset(hw, 0, sizeof(*hw));
-
- hw->io_ports.data_addr = base;
-
- for (i = 1; i < 8; i++)
- hw->io_ports_array[i] = base + 2 + i * 4;
-
- hw->io_ports.ctl_addr = ctl;
- hw->io_ports.irq_addr = irq_port;
-
- hw->irq = IRQ_AMIGA_PORTS;
-}
-
-static const struct ide_port_ops buddha_port_ops = {
- .test_irq = buddha_test_irq,
-};
-
-static const struct ide_port_ops xsurf_port_ops = {
- .clear_irq = xsurf_clear_irq,
- .test_irq = buddha_test_irq,
-};
-
-static const struct ide_port_info buddha_port_info = {
- .port_ops = &buddha_port_ops,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
- .irq_flags = IRQF_SHARED,
- .chipset = ide_generic,
-};
-
- /*
- * Probe for a Buddha or Catweasel IDE interface
- */
-
-static int __init buddha_init(void)
-{
- struct zorro_dev *z = NULL;
- u_long buddha_board = 0;
- BuddhaType type;
- int buddha_num_hwifs, i;
-
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- unsigned long board;
- struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
- struct ide_port_info d = buddha_port_info;
-
- if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
- buddha_num_hwifs = BUDDHA_NUM_HWIFS;
- type=BOARD_BUDDHA;
- } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
- buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
- type=BOARD_CATWEASEL;
- } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
- buddha_num_hwifs = XSURF_NUM_HWIFS;
- type=BOARD_XSURF;
- d.port_ops = &xsurf_port_ops;
- } else
- continue;
-
- board = z->resource.start;
-
- if(type != BOARD_XSURF) {
- if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
- continue;
- } else {
- if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
- continue;
- if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
- goto fail_base2;
- if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
- release_mem_region(board+XSURF_BASE2, 0x1000);
-fail_base2:
- release_mem_region(board+XSURF_BASE1, 0x1000);
- continue;
- }
- }
- buddha_board = (unsigned long)ZTWO_VADDR(board);
-
- /* write to BUDDHA_IRQ_MR to enable the board IRQ */
- /* X-Surf doesn't have this. IRQs are always on */
- if (type != BOARD_XSURF)
- z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
-
- printk(KERN_INFO "ide: %s IDE controller\n",
- buddha_board_name[type]);
-
- for (i = 0; i < buddha_num_hwifs; i++) {
- unsigned long base, ctl, irq_port;
-
- if (type != BOARD_XSURF) {
- base = buddha_board + buddha_bases[i];
- ctl = base + BUDDHA_CONTROL;
- irq_port = buddha_board + buddha_irqports[i];
- } else {
- base = buddha_board + xsurf_bases[i];
- /* X-Surf has no CS1* (Control/AltStat) */
- ctl = 0;
- irq_port = buddha_board + xsurf_irqports[i];
- }
-
- buddha_setup_ports(&hw[i], base, ctl, irq_port);
-
- hws[i] = &hw[i];
- }
-
- ide_host_add(&d, hws, i, NULL);
- }
-
- return 0;
-}
-
-module_init(buddha_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
deleted file mode 100644
index f48decb9fac4..000000000000
--- a/drivers/ide/cmd640.c
+++ /dev/null
@@ -1,848 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
- */
-
-/*
- * Original authors: abramov@...mow.enet.dec.com (Igor Abramov)
- * mlord@...ox.com (Mark Lord)
- *
- * See linux/MAINTAINERS for address of current maintainer.
- *
- * This file provides support for the advanced features and bugs
- * of IDE interfaces using the CMD Technologies 0640 IDE interface chip.
- *
- * These chips are basically fucked by design, and getting this driver
- * to work on every motherboard design that uses this screwed chip seems
- * bloody well impossible. However, we're still trying.
- *
- * Version 0.97 worked for everybody.
- *
- * User feedback is essential. Many thanks to the beta test team:
- *
- * A.Hartgers@...d.tue.nl, JZDQC@...YVM.CUNY.edu, abramov@...mow.enet.dec.com,
- * bardj@...pia.ppp.sn.no, bart@...a.tue.nl, bbol001@...auckland.ac.nz,
- * chrisc@...ss.demon.co.uk, dalecki@...u26.Num.Math.Uni-Goettingen.de,
- * derekn@...ece.cmu.edu, florian@...2x3.phy.uni-bayreuth.de,
- * flynn@....unipd.it, gadio@...vision.net.il, godzilla@...uris.net,
- * j@...ox.com, jkemp1@...es.uni-paderborn.de, jtoppe@...aay.net,
- * kerouac@...et.com, meskes@...ormatik.rwth-aachen.de, hzoli@...elte.hu,
- * peter@...aard.isgtec.com, phil@...enda.demon.co.uk, roadcapw@....com,
- * s0033las@...10.vsz.bme.hu, schaffer@....cornell.edu, sjd@...p.net,
- * steve@...org, ulrpeg@...comm.gun.de, ism@...dis.ed.ac.uk, mack@...y.com
- * liug@...a.indstate.edu, and others.
- *
- * Version 0.01 Initial version, hacked out of ide.c,
- * and #include'd rather than compiled separately.
- * This will get cleaned up in a subsequent release.
- *
- * Version 0.02 Fixes for vlb initialization code, enable prefetch
- * for versions 'B' and 'C' of chip by default,
- * some code cleanup.
- *
- * Version 0.03 Added reset of secondary interface,
- * and black list for devices which are not compatible
- * with prefetch mode. Separate function for setting
- * prefetch is added, possibly it will be called some
- * day from ioctl processing code.
- *
- * Version 0.04 Now configs/compiles separate from ide.c
- *
- * Version 0.05 Major rewrite of interface timing code.
- * Added new function cmd640_set_mode to set PIO mode
- * from ioctl call. New drives added to black list.
- *
- * Version 0.06 More code cleanup. Prefetch is enabled only for
- * detected hard drives, not included in prefetch
- * black list.
- *
- * Version 0.07 Changed to more conservative drive tuning policy.
- * Unknown drives, which report PIO < 4 are set to
- * (reported_PIO - 1) if it is supported, or to PIO0.
- * List of known drives extended by info provided by
- * CMD at their ftp site.
- *
- * Version 0.08 Added autotune/noautotune support.
- *
- * Version 0.09 Try to be smarter about 2nd port enabling.
- * Version 0.10 Be nice and don't reset 2nd port.
- * Version 0.11 Try to handle more weird situations.
- *
- * Version 0.12 Lots of bug fixes from Laszlo Peter
- * irq unmasking disabled for reliability.
- * try to be even smarter about the second port.
- * tidy up source code formatting.
- * Version 0.13 permit irq unmasking again.
- * Version 0.90 massive code cleanup, some bugs fixed.
- * defaults all drives to PIO mode0, prefetch off.
- * autotune is OFF by default, with compile time flag.
- * prefetch can be turned OFF/ON using "hdparm -p8/-p9"
- * (requires hdparm-3.1 or newer)
- * Version 0.91 first release to linux-kernel list.
- * Version 0.92 move initial reg dump to separate callable function
- * change "readahead" to "prefetch" to avoid confusion
- * Version 0.95 respect original BIOS timings unless autotuning.
- * tons of code cleanup and rearrangement.
- * added CONFIG_BLK_DEV_CMD640_ENHANCED option
- * prevent use of unmask when prefetch is on
- * Version 0.96 prevent use of io_32bit when prefetch is off
- * Version 0.97 fix VLB secondary interface for sjd@...p.net
- * other minor tune-ups: 0.96 was very good.
- * Version 0.98 ignore PCI version when disabled by BIOS
- * Version 0.99 display setup/active/recovery clocks with PIO mode
- * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems
- * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7"
- * ("fast" is necessary for 32bit I/O in some systems)
- * Version 1.02 fix bug that resulted in slow "setup times"
- * (patch courtesy of Zoltan Hidvegi)
- */
-
-#define CMD640_PREFETCH_MASKS 1
-
-/*#define CMD640_DUMP_REGS */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cmd640"
-
-static bool cmd640_vlb;
-
-/*
- * CMD640 specific registers definition.
- */
-
-#define VID 0x00
-#define DID 0x02
-#define PCMD 0x04
-#define PCMD_ENA 0x01
-#define PSTTS 0x06
-#define REVID 0x08
-#define PROGIF 0x09
-#define SUBCL 0x0a
-#define BASCL 0x0b
-#define BaseA0 0x10
-#define BaseA1 0x14
-#define BaseA2 0x18
-#define BaseA3 0x1c
-#define INTLINE 0x3c
-#define INPINE 0x3d
-
-#define CFR 0x50
-#define CFR_DEVREV 0x03
-#define CFR_IDE01INTR 0x04
-#define CFR_DEVID 0x18
-#define CFR_AT_VESA_078h 0x20
-#define CFR_DSA1 0x40
-#define CFR_DSA0 0x80
-
-#define CNTRL 0x51
-#define CNTRL_DIS_RA0 0x40
-#define CNTRL_DIS_RA1 0x80
-#define CNTRL_ENA_2ND 0x08
-
-#define CMDTIM 0x52
-#define ARTTIM0 0x53
-#define DRWTIM0 0x54
-#define ARTTIM1 0x55
-#define DRWTIM1 0x56
-#define ARTTIM23 0x57
-#define ARTTIM23_DIS_RA2 0x04
-#define ARTTIM23_DIS_RA3 0x08
-#define ARTTIM23_IDE23INTR 0x10
-#define DRWTIM23 0x58
-#define BRST 0x59
-
-/*
- * Registers and masks for easy access by drive index:
- */
-static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
-static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
-static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
-
-/*
- * Current cmd640 timing values for each drive.
- * The defaults for each are the slowest possible timings.
- */
-static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */
-static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */
-static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
-
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static DEFINE_SPINLOCK(cmd640_lock);
-
-/*
- * Interface to access cmd640x registers
- */
-static unsigned int cmd640_key;
-static void (*__put_cmd640_reg)(u16 reg, u8 val);
-static u8 (*__get_cmd640_reg)(u16 reg);
-
-/*
- * This is read from the CFR reg, and is used in several places.
- */
-static unsigned int cmd640_chip_version;
-
-/*
- * The CMD640x chip does not support DWORD config write cycles, but some
- * of the BIOSes use them to implement the config services.
- * Therefore, we must use direct IO instead.
- */
-
-/* PCI method 1 access */
-
-static void put_cmd640_reg_pci1(u16 reg, u8 val)
-{
- outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
- outb_p(val, (reg & 3) | 0xcfc);
-}
-
-static u8 get_cmd640_reg_pci1(u16 reg)
-{
- outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
- return inb_p((reg & 3) | 0xcfc);
-}
-
-/* PCI method 2 access (from CMD datasheet) */
-
-static void put_cmd640_reg_pci2(u16 reg, u8 val)
-{
- outb_p(0x10, 0xcf8);
- outb_p(val, cmd640_key + reg);
- outb_p(0, 0xcf8);
-}
-
-static u8 get_cmd640_reg_pci2(u16 reg)
-{
- u8 b;
-
- outb_p(0x10, 0xcf8);
- b = inb_p(cmd640_key + reg);
- outb_p(0, 0xcf8);
- return b;
-}
-
-/* VLB access */
-
-static void put_cmd640_reg_vlb(u16 reg, u8 val)
-{
- outb_p(reg, cmd640_key);
- outb_p(val, cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg_vlb(u16 reg)
-{
- outb_p(reg, cmd640_key);
- return inb_p(cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg(u16 reg)
-{
- unsigned long flags;
- u8 b;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- b = __get_cmd640_reg(reg);
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return b;
-}
-
-static void put_cmd640_reg(u16 reg, u8 val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- __put_cmd640_reg(reg, val);
- spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-static int __init match_pci_cmd640_device(void)
-{
- const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
- unsigned int i;
- for (i = 0; i < 4; i++) {
- if (get_cmd640_reg(i) != ven_dev[i])
- return 0;
- }
-#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
- if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
- printk("ide: cmd640 on PCI disabled by BIOS\n");
- return 0;
- }
-#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
- return 1; /* success */
-}
-
-/*
- * Probe for CMD640x -- pci method 1
- */
-static int __init probe_for_cmd640_pci1(void)
-{
- __get_cmd640_reg = get_cmd640_reg_pci1;
- __put_cmd640_reg = put_cmd640_reg_pci1;
- for (cmd640_key = 0x80000000;
- cmd640_key <= 0x8000f800;
- cmd640_key += 0x800) {
- if (match_pci_cmd640_device())
- return 1; /* success */
- }
- return 0;
-}
-
-/*
- * Probe for CMD640x -- pci method 2
- */
-static int __init probe_for_cmd640_pci2(void)
-{
- __get_cmd640_reg = get_cmd640_reg_pci2;
- __put_cmd640_reg = put_cmd640_reg_pci2;
- for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) {
- if (match_pci_cmd640_device())
- return 1; /* success */
- }
- return 0;
-}
-
-/*
- * Probe for CMD640x -- vlb
- */
-static int __init probe_for_cmd640_vlb(void)
-{
- u8 b;
-
- __get_cmd640_reg = get_cmd640_reg_vlb;
- __put_cmd640_reg = put_cmd640_reg_vlb;
- cmd640_key = 0x178;
- b = get_cmd640_reg(CFR);
- if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {
- cmd640_key = 0x78;
- b = get_cmd640_reg(CFR);
- if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))
- return 0;
- }
- return 1; /* success */
-}
-
-/*
- * Returns 1 if an IDE interface/drive exists at 0x170,
- * Returns 0 otherwise.
- */
-static int __init secondary_port_responding(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cmd640_lock, flags);
-
- outb_p(0x0a, 0x176); /* select drive0 */
- udelay(100);
- if ((inb_p(0x176) & 0x1f) != 0x0a) {
- outb_p(0x1a, 0x176); /* select drive1 */
- udelay(100);
- if ((inb_p(0x176) & 0x1f) != 0x1a) {
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 0; /* nothing responded */
- }
- }
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 1; /* success */
-}
-
-#ifdef CMD640_DUMP_REGS
-/*
- * Dump out all cmd640 registers. May be called from ide.c
- */
-static void cmd640_dump_regs(void)
-{
- unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
-
- /* Dump current state of chip registers */
- printk("ide: cmd640 internal register dump:");
- for (; reg <= 0x59; reg++) {
- if (!(reg & 0x0f))
- printk("\n%04x:", reg);
- printk(" %02x", get_cmd640_reg(reg));
- }
- printk("\n");
-}
-#endif
-
-static void __set_prefetch_mode(ide_drive_t *drive, int mode)
-{
- if (mode) { /* want prefetch on? */
-#if CMD640_PREFETCH_MASKS
- drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
- drive->dev_flags &= ~IDE_DFLAG_UNMASK;
-#endif
- drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
- } else {
- drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
- drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
- drive->io_32bit = 0;
- }
-}
-
-#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED
-/*
- * Check whether prefetch is on for a drive,
- * and initialize the unmask flags for safe operation.
- */
-static void __init check_prefetch(ide_drive_t *drive, unsigned int index)
-{
- u8 b = get_cmd640_reg(prefetch_regs[index]);
-
- __set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1);
-}
-#else
-
-/*
- * Sets prefetch mode for a drive.
- */
-static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode)
-{
- unsigned long flags;
- int reg = prefetch_regs[index];
- u8 b;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- b = __get_cmd640_reg(reg);
- __set_prefetch_mode(drive, mode);
- if (mode)
- b &= ~prefetch_masks[index]; /* enable prefetch */
- else
- b |= prefetch_masks[index]; /* disable prefetch */
- __put_cmd640_reg(reg, b);
- spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-/*
- * Dump out current drive clocks settings
- */
-static void display_clocks(unsigned int index)
-{
- u8 active_count, recovery_count;
-
- active_count = active_counts[index];
- if (active_count == 1)
- ++active_count;
- recovery_count = recovery_counts[index];
- if (active_count > 3 && recovery_count == 1)
- ++recovery_count;
- if (cmd640_chip_version > 1)
- recovery_count += 1; /* cmd640b uses (count + 1)*/
- printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count);
-}
-
-/*
- * Pack active and recovery counts into single byte representation
- * used by controller
- */
-static inline u8 pack_nibbles(u8 upper, u8 lower)
-{
- return ((upper & 0x0f) << 4) | (lower & 0x0f);
-}
-
-/*
- * This routine writes the prepared setup/active/recovery counts
- * for a drive into the cmd640 chipset registers to active them.
- */
-static void program_drive_counts(ide_drive_t *drive, unsigned int index)
-{
- unsigned long flags;
- u8 setup_count = setup_counts[index];
- u8 active_count = active_counts[index];
- u8 recovery_count = recovery_counts[index];
-
- /*
- * Set up address setup count and drive read/write timing registers.
- * Primary interface has individual count/timing registers for
- * each drive. Secondary interface has one common set of registers,
- * so we merge the timings, using the slowest value for each timing.
- */
- if (index > 1) {
- ide_drive_t *peer = ide_get_pair_dev(drive);
- unsigned int mate = index ^ 1;
-
- if (peer) {
- if (setup_count < setup_counts[mate])
- setup_count = setup_counts[mate];
- if (active_count < active_counts[mate])
- active_count = active_counts[mate];
- if (recovery_count < recovery_counts[mate])
- recovery_count = recovery_counts[mate];
- }
- }
-
- /*
- * Convert setup_count to internal chipset representation
- */
- switch (setup_count) {
- case 4: setup_count = 0x00; break;
- case 3: setup_count = 0x80; break;
- case 1:
- case 2: setup_count = 0x40; break;
- default: setup_count = 0xc0; /* case 5 */
- }
-
- /*
- * Now that everything is ready, program the new timings
- */
- spin_lock_irqsave(&cmd640_lock, flags);
- /*
- * Program the address_setup clocks into ARTTIM reg,
- * and then the active/recovery counts into the DRWTIM reg
- * (this converts counts of 16 into counts of zero -- okay).
- */
- setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f;
- __put_cmd640_reg(arttim_regs[index], setup_count);
- __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count));
- spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-/*
- * Set a specific pio_mode for a drive
- */
-static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
- u8 pio_mode, unsigned int cycle_time)
-{
- struct ide_timing *t;
- int setup_time, active_time, recovery_time, clock_time;
- u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
- int bus_speed;
-
- if (cmd640_vlb)
- bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
- else
- bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-
- if (pio_mode > 5)
- pio_mode = 5;
-
- t = ide_timing_find_mode(XFER_PIO_0 + pio_mode);
- setup_time = t->setup;
- active_time = t->active;
-
- recovery_time = cycle_time - (setup_time + active_time);
- clock_time = 1000 / bus_speed;
- cycle_count = DIV_ROUND_UP(cycle_time, clock_time);
-
- setup_count = DIV_ROUND_UP(setup_time, clock_time);
-
- active_count = DIV_ROUND_UP(active_time, clock_time);
- if (active_count < 2)
- active_count = 2; /* minimum allowed by cmd640 */
-
- recovery_count = DIV_ROUND_UP(recovery_time, clock_time);
- recovery_count2 = cycle_count - (setup_count + active_count);
- if (recovery_count2 > recovery_count)
- recovery_count = recovery_count2;
- if (recovery_count < 2)
- recovery_count = 2; /* minimum allowed by cmd640 */
- if (recovery_count > 17) {
- active_count += recovery_count - 17;
- recovery_count = 17;
- }
- if (active_count > 16)
- active_count = 16; /* maximum allowed by cmd640 */
- if (cmd640_chip_version > 1)
- recovery_count -= 1; /* cmd640b uses (count + 1)*/
- if (recovery_count > 16)
- recovery_count = 16; /* maximum allowed by cmd640 */
-
- setup_counts[index] = setup_count;
- active_counts[index] = active_count;
- recovery_counts[index] = recovery_count;
-
- /*
- * In a perfect world, we might set the drive pio mode here
- * (using WIN_SETFEATURE) before continuing.
- *
- * But we do not, because:
- * 1) this is the wrong place to do it (proper is do_special() in ide.c)
- * 2) in practice this is rarely, if ever, necessary
- */
- program_drive_counts(drive, index);
-}
-
-static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned int index = 0, cycle_time;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- u8 b;
-
- switch (pio) {
- case 6: /* set fast-devsel off */
- case 7: /* set fast-devsel on */
- b = get_cmd640_reg(CNTRL) & ~0x27;
- if (pio & 1)
- b |= 0x27;
- put_cmd640_reg(CNTRL, b);
- printk("%s: %sabled cmd640 fast host timing (devsel)\n",
- drive->name, (pio & 1) ? "en" : "dis");
- return;
- case 8: /* set prefetch off */
- case 9: /* set prefetch on */
- set_prefetch_mode(drive, index, pio & 1);
- printk("%s: %sabled cmd640 prefetch\n",
- drive->name, (pio & 1) ? "en" : "dis");
- return;
- }
-
- cycle_time = ide_pio_cycle_time(drive, pio);
- cmd640_set_mode(drive, index, pio, cycle_time);
-
- printk("%s: selected cmd640 PIO mode%d (%dns)",
- drive->name, pio, cycle_time);
-
- display_clocks(index);
-}
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static void __init cmd640_init_dev(ide_drive_t *drive)
-{
- unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- /*
- * Reset timing to the slowest speed and turn off prefetch.
- * This way, the drive identify code has a better chance.
- */
- setup_counts[i] = 4; /* max possible */
- active_counts[i] = 16; /* max possible */
- recovery_counts[i] = 16; /* max possible */
- program_drive_counts(drive, i);
- set_prefetch_mode(drive, i, 0);
- printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i);
-#else
- /*
- * Set the drive unmask flags to match the prefetch setting.
- */
- check_prefetch(drive, i);
- printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
- i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on");
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-}
-
-static int cmd640_test_irq(ide_hwif_t *hwif)
-{
- int irq_reg = hwif->channel ? ARTTIM23 : CFR;
- u8 irq_mask = hwif->channel ? ARTTIM23_IDE23INTR :
- CFR_IDE01INTR;
- u8 irq_stat = get_cmd640_reg(irq_reg);
-
- return (irq_stat & irq_mask) ? 1 : 0;
-}
-
-static const struct ide_port_ops cmd640_port_ops = {
- .init_dev = cmd640_init_dev,
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- .set_pio_mode = cmd640_set_pio_mode,
-#endif
- .test_irq = cmd640_test_irq,
-};
-
-static int pci_conf1(void)
-{
- unsigned long flags;
- u32 tmp;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- outb(0x01, 0xCFB);
- tmp = inl(0xCF8);
- outl(0x80000000, 0xCF8);
- if (inl(0xCF8) == 0x80000000) {
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 1;
- }
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 0;
-}
-
-static int pci_conf2(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- outb(0x00, 0xCFB);
- outb(0x00, 0xCF8);
- outb(0x00, 0xCFA);
- if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) {
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 1;
- }
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 0;
-}
-
-static const struct ide_port_info cmd640_port_info __initconst = {
- .chipset = ide_cmd640,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_NO_DMA |
- IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_ABUSE_FAST_DEVSEL,
- .port_ops = &cmd640_port_ops,
- .pio_mask = ATA_PIO5,
-};
-
-static int __init cmd640x_init_one(unsigned long base, unsigned long ctl)
-{
- if (!request_region(base, 8, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- DRV_NAME, base, base + 7);
- return -EBUSY;
- }
-
- if (!request_region(ctl, 1, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- DRV_NAME, ctl);
- release_region(base, 8);
- return -EBUSY;
- }
-
- return 0;
-}
-
-/*
- * Probe for a cmd640 chipset, and initialize it if found.
- */
-static int __init cmd640x_init(void)
-{
- int second_port_cmd640 = 0, rc;
- const char *bus_type, *port2;
- u8 b, cfr;
- struct ide_hw hw[2], *hws[2];
-
- if (cmd640_vlb && probe_for_cmd640_vlb()) {
- bus_type = "VLB";
- } else {
- cmd640_vlb = 0;
- /* Find out what kind of PCI probing is supported otherwise
- Justin Gibbs will sulk.. */
- if (pci_conf1() && probe_for_cmd640_pci1())
- bus_type = "PCI (type1)";
- else if (pci_conf2() && probe_for_cmd640_pci2())
- bus_type = "PCI (type2)";
- else
- return 0;
- }
- /*
- * Undocumented magic (there is no 0x5b reg in specs)
- */
- put_cmd640_reg(0x5b, 0xbd);
- if (get_cmd640_reg(0x5b) != 0xbd) {
- printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n");
- return 0;
- }
- put_cmd640_reg(0x5b, 0);
-
-#ifdef CMD640_DUMP_REGS
- cmd640_dump_regs();
-#endif
-
- /*
- * Documented magic begins here
- */
- cfr = get_cmd640_reg(CFR);
- cmd640_chip_version = cfr & CFR_DEVREV;
- if (cmd640_chip_version == 0) {
- printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
- return 0;
- }
-
- rc = cmd640x_init_one(0x1f0, 0x3f6);
- if (rc)
- return rc;
-
- rc = cmd640x_init_one(0x170, 0x376);
- if (rc) {
- release_region(0x3f6, 1);
- release_region(0x1f0, 8);
- return rc;
- }
-
- memset(&hw, 0, sizeof(hw));
-
- ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
- hw[0].irq = 14;
-
- ide_std_init_ports(&hw[1], 0x170, 0x376);
- hw[1].irq = 15;
-
- printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
- "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
-
- /*
- * Initialize data for primary port
- */
- hws[0] = &hw[0];
-
- /*
- * Ensure compatibility by always using the slowest timings
- * for access to the drive's command register block,
- * and reset the prefetch burstsize to default (512 bytes).
- *
- * Maybe we need a way to NOT do these on *some* systems?
- */
- put_cmd640_reg(CMDTIM, 0);
- put_cmd640_reg(BRST, 0x40);
-
- b = get_cmd640_reg(CNTRL);
-
- /*
- * Try to enable the secondary interface, if not already enabled
- */
- if (secondary_port_responding()) {
- if ((b & CNTRL_ENA_2ND)) {
- second_port_cmd640 = 1;
- port2 = "okay";
- } else if (cmd640_vlb) {
- second_port_cmd640 = 1;
- port2 = "alive";
- } else
- port2 = "not cmd640";
- } else {
- put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
- if (secondary_port_responding()) {
- second_port_cmd640 = 1;
- port2 = "enabled";
- } else {
- put_cmd640_reg(CNTRL, b); /* restore original setting */
- port2 = "not responding";
- }
- }
-
- /*
- * Initialize data for secondary cmd640 port, if enabled
- */
- if (second_port_cmd640)
- hws[1] = &hw[1];
-
- printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
- second_port_cmd640 ? "" : "not ", port2);
-
-#ifdef CMD640_DUMP_REGS
- cmd640_dump_regs();
-#endif
-
- return ide_host_add(&cmd640_port_info, hws, second_port_cmd640 ? 2 : 1,
- NULL);
-}
-
-module_param_named(probe_vlb, cmd640_vlb, bool, 0);
-MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
-
-module_init(cmd640x_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
deleted file mode 100644
index 943bf944bf72..000000000000
--- a/drivers/ide/cmd64x.c
+++ /dev/null
@@ -1,452 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
- * Due to massive hardware bugs, UltraDMA is only supported
- * on the 646U2 and not on the 646U.
- *
- * Copyright (C) 1998 Eddie C. Dost (ecd@...net.be)
- * Copyright (C) 1998 David S. Miller (davem@...hat.com)
- *
- * Copyright (C) 1999-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
- * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@...sta.com>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cmd64x"
-
-/*
- * CMD64x specific registers definition.
- */
-#define CFR 0x50
-#define CFR_INTR_CH0 0x04
-
-#define CMDTIM 0x52
-#define ARTTIM0 0x53
-#define DRWTIM0 0x54
-#define ARTTIM1 0x55
-#define DRWTIM1 0x56
-#define ARTTIM23 0x57
-#define ARTTIM23_DIS_RA2 0x04
-#define ARTTIM23_DIS_RA3 0x08
-#define ARTTIM23_INTR_CH1 0x10
-#define DRWTIM2 0x58
-#define BRST 0x59
-#define DRWTIM3 0x5b
-
-#define BMIDECR0 0x70
-#define MRDMODE 0x71
-#define MRDMODE_INTR_CH0 0x04
-#define MRDMODE_INTR_CH1 0x08
-#define UDIDETCR0 0x73
-#define DTPR0 0x74
-#define BMIDECR1 0x78
-#define BMIDECSR 0x79
-#define UDIDETCR1 0x7B
-#define DTPR1 0x7C
-
-static void cmd64x_program_timings(ide_drive_t *drive, u8 mode)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- const unsigned long T = 1000000 / bus_speed;
- static const u8 recovery_values[] =
- {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
- static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
- static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
- struct ide_timing t;
- u8 arttim = 0;
-
- if (drive->dn >= ARRAY_SIZE(drwtim_regs))
- return;
-
- ide_timing_compute(drive, mode, &t, T, 0);
-
- /*
- * In case we've got too long recovery phase, try to lengthen
- * the active phase
- */
- if (t.recover > 16) {
- t.active += t.recover - 16;
- t.recover = 16;
- }
- if (t.active > 16) /* shouldn't actually happen... */
- t.active = 16;
-
- /*
- * Convert values to internal chipset representation
- */
- t.recover = recovery_values[t.recover];
- t.active &= 0x0f;
-
- /* Program the active/recovery counts into the DRWTIM register */
- pci_write_config_byte(dev, drwtim_regs[drive->dn],
- (t.active << 4) | t.recover);
-
- /*
- * The primary channel has individual address setup timing registers
- * for each drive and the hardware selects the slowest timing itself.
- * The secondary channel has one common register and we have to select
- * the slowest address setup timing ourselves.
- */
- if (hwif->channel) {
- ide_drive_t *pair = ide_get_pair_dev(drive);
-
- if (pair) {
- struct ide_timing tp;
-
- ide_timing_compute(pair, pair->pio_mode, &tp, T, 0);
- ide_timing_merge(&t, &tp, &t, IDE_TIMING_SETUP);
- if (pair->dma_mode) {
- ide_timing_compute(pair, pair->dma_mode,
- &tp, T, 0);
- ide_timing_merge(&tp, &t, &t, IDE_TIMING_SETUP);
- }
- }
- }
-
- if (t.setup > 5) /* shouldn't actually happen... */
- t.setup = 5;
-
- /*
- * Program the address setup clocks into the ARTTIM registers.
- * Avoid clearing the secondary channel's interrupt bit.
- */
- (void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim);
- if (hwif->channel)
- arttim &= ~ARTTIM23_INTR_CH1;
- arttim &= ~0xc0;
- arttim |= setup_values[t.setup];
- (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
-}
-
-/*
- * Attempts to set drive's PIO mode.
- * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
- */
-
-static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /*
- * Filter out the prefetch control values
- * to prevent PIO5 from being programmed
- */
- if (pio == 8 || pio == 9)
- return;
-
- cmd64x_program_timings(drive, XFER_PIO_0 + pio);
-}
-
-static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 unit = drive->dn & 0x01;
- u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
- const u8 speed = drive->dma_mode;
-
- pci_read_config_byte(dev, pciU, ®U);
- regU &= ~(unit ? 0xCA : 0x35);
-
- switch(speed) {
- case XFER_UDMA_5:
- regU |= unit ? 0x0A : 0x05;
- break;
- case XFER_UDMA_4:
- regU |= unit ? 0x4A : 0x15;
- break;
- case XFER_UDMA_3:
- regU |= unit ? 0x8A : 0x25;
- break;
- case XFER_UDMA_2:
- regU |= unit ? 0x42 : 0x11;
- break;
- case XFER_UDMA_1:
- regU |= unit ? 0x82 : 0x21;
- break;
- case XFER_UDMA_0:
- regU |= unit ? 0xC2 : 0x31;
- break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- cmd64x_program_timings(drive, speed);
- break;
- }
-
- pci_write_config_byte(dev, pciU, regU);
-}
-
-static void cmd648_clear_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = pci_resource_start(dev, 4);
- u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
- MRDMODE_INTR_CH0;
- u8 mrdmode = inb(base + 1);
-
- /* clear the interrupt bit */
- outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
- base + 1);
-}
-
-static void cmd64x_clear_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int irq_reg = hwif->channel ? ARTTIM23 : CFR;
- u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
- CFR_INTR_CH0;
- u8 irq_stat = 0;
-
- (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
- /* clear the interrupt bit */
- (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
-}
-
-static int cmd648_test_irq(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = pci_resource_start(dev, 4);
- u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
- MRDMODE_INTR_CH0;
- u8 mrdmode = inb(base + 1);
-
- pr_debug("%s: mrdmode: 0x%02x irq_mask: 0x%02x\n",
- hwif->name, mrdmode, irq_mask);
-
- return (mrdmode & irq_mask) ? 1 : 0;
-}
-
-static int cmd64x_test_irq(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int irq_reg = hwif->channel ? ARTTIM23 : CFR;
- u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
- CFR_INTR_CH0;
- u8 irq_stat = 0;
-
- (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
-
- pr_debug("%s: irq_stat: 0x%02x irq_mask: 0x%02x\n",
- hwif->name, irq_stat, irq_mask);
-
- return (irq_stat & irq_mask) ? 1 : 0;
-}
-
-/*
- * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
- * event order for DMA transfers.
- */
-
-static int cmd646_1_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat = 0, dma_cmd = 0;
-
- /* get DMA status */
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- /* read DMA command state */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- /* stop DMA */
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- /* clear the INTR & ERROR bits */
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
- /* verify good DMA status */
- return (dma_stat & 7) != 4;
-}
-
-static int init_chipset_cmd64x(struct pci_dev *dev)
-{
- u8 mrdmode = 0;
-
- /* Set a good latency timer and cache line size value. */
- (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
- /* FIXME: pci_set_master() to ensure a good latency timer value */
-
- /*
- * Enable interrupts, select MEMORY READ LINE for reads.
- *
- * NOTE: although not mentioned in the PCI0646U specs,
- * bits 0-1 are write only and won't be read back as
- * set or not -- PCI0646U2 specs clarify this point.
- */
- (void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
- mrdmode &= ~0x30;
- (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
-
- return 0;
-}
-
-static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- switch (dev->device) {
- case PCI_DEVICE_ID_CMD_648:
- case PCI_DEVICE_ID_CMD_649:
- pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
- return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- default:
- return ATA_CBL_PATA40;
- }
-}
-
-static const struct ide_port_ops cmd64x_port_ops = {
- .set_pio_mode = cmd64x_set_pio_mode,
- .set_dma_mode = cmd64x_set_dma_mode,
- .clear_irq = cmd64x_clear_irq,
- .test_irq = cmd64x_test_irq,
- .cable_detect = cmd64x_cable_detect,
-};
-
-static const struct ide_port_ops cmd648_port_ops = {
- .set_pio_mode = cmd64x_set_pio_mode,
- .set_dma_mode = cmd64x_set_dma_mode,
- .clear_irq = cmd648_clear_irq,
- .test_irq = cmd648_test_irq,
- .cable_detect = cmd64x_cable_detect,
-};
-
-static const struct ide_dma_ops cmd646_rev1_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = cmd646_1_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info cmd64x_chipsets[] = {
- { /* 0: CMD643 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
- .port_ops = &cmd64x_port_ops,
- .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
- IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_SERIALIZE,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = 0x00, /* no udma */
- },
- { /* 1: CMD646 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
- .port_ops = &cmd648_port_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_SERIALIZE,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
- },
- { /* 2: CMD648 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
- .port_ops = &cmd648_port_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
- },
- { /* 3: CMD649 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
- .port_ops = &cmd648_port_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- }
-};
-
-static int cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d;
- u8 idx = id->driver_data;
-
- d = cmd64x_chipsets[idx];
-
- if (idx == 1) {
- /*
- * UltraDMA only supported on PCI646U and PCI646U2, which
- * correspond to revisions 0x03, 0x05 and 0x07 respectively.
- * Actually, although the CMD tech support people won't
- * tell me the details, the 0x03 revision cannot support
- * UDMA correctly without hardware modifications, and even
- * then it only works with Quantum disks due to some
- * hold time assumptions in the 646U part which are fixed
- * in the 646U2.
- *
- * So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
- */
- if (dev->revision < 5) {
- d.udma_mask = 0x00;
- /*
- * The original PCI0646 didn't have the primary
- * channel enable bit, it appeared starting with
- * PCI0646U (i.e. revision ID 3).
- */
- if (dev->revision < 3) {
- d.enablebits[0].reg = 0;
- d.port_ops = &cmd64x_port_ops;
- if (dev->revision == 1)
- d.dma_ops = &cmd646_rev1_dma_ops;
- }
- }
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id cmd64x_pci_tbl[] = {
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);
-
-static struct pci_driver cmd64x_pci_driver = {
- .name = "CMD64x_IDE",
- .id_table = cmd64x_pci_tbl,
- .probe = cmd64x_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cmd64x_ide_init(void)
-{
- return ide_pci_register_driver(&cmd64x_pci_driver);
-}
-
-static void __exit cmd64x_ide_exit(void)
-{
- pci_unregister_driver(&cmd64x_pci_driver);
-}
-
-module_init(cmd64x_ide_init);
-module_exit(cmd64x_ide_exit);
-
-MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
deleted file mode 100644
index 89a4ff100b7a..000000000000
--- a/drivers/ide/cs5520.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * IDE tuning and bus mastering support for the CS5510/CS5520
- * chipsets
- *
- * The CS5510/CS5520 are slightly unusual devices. Unlike the
- * typical IDE controllers they do bus mastering with the drive in
- * PIO mode and smarter silicon.
- *
- * The practical upshot of this is that we must always tune the
- * drive for the right PIO mode. We must also ignore all the blacklists
- * and the drive bus mastering DMA information.
- *
- * *** This driver is strictly experimental ***
- *
- * (c) Copyright Red Hat Inc 2002
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * For the avoidance of doubt the "preferred form" of this code is one which
- * is in an open non patent encumbered format. Where cryptographic key signing
- * forms part of the process of creating an executable the information
- * including keys needed to generate an equivalently functional executable
- * are deemed to be part of the source code.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/dma-mapping.h>
-
-#define DRV_NAME "cs5520"
-
-struct pio_clocks
-{
- int address;
- int assert;
- int recovery;
-};
-
-static struct pio_clocks cs5520_pio_clocks[]={
- {3, 6, 11},
- {2, 5, 6},
- {1, 4, 3},
- {1, 3, 2},
- {1, 2, 1}
-};
-
-static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- int controller = drive->dn > 1 ? 1 : 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /* 8bit CAT/CRT - 8bit command timing for channel */
- pci_write_config_byte(pdev, 0x62 + controller,
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
-
- /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
-
- /* FIXME: should these use address ? */
- /* Data read timing */
- pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
- /* Write command timing */
- pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
-}
-
-static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- printk(KERN_ERR "cs55x0: bad ide timing.\n");
-
- drive->pio_mode = XFER_PIO_0 + 0;
- cs5520_set_pio_mode(hwif, drive);
-}
-
-static const struct ide_port_ops cs5520_port_ops = {
- .set_pio_mode = cs5520_set_pio_mode,
- .set_dma_mode = cs5520_set_dma_mode,
-};
-
-static const struct ide_port_info cyrix_chipset = {
- .name = DRV_NAME,
- .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } },
- .port_ops = &cs5520_port_ops,
- .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
- .pio_mask = ATA_PIO4,
-};
-
-/*
- * The 5510/5520 are a bit weird. They don't quite set up the way
- * the PCI helper layer expects so we must do much of the set up
- * work longhand.
- */
-
-static int cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d = &cyrix_chipset;
- struct ide_hw hw[2], *hws[] = { NULL, NULL };
-
- ide_setup_pci_noise(dev, d);
-
- /* We must not grab the entire device, it has 'ISA' space in its
- * BARS too and we will freak out other bits of the kernel
- */
- if (pci_enable_device_io(dev)) {
- printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
- return -ENODEV;
- }
- pci_set_master(dev);
- if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING "%s: No suitable DMA available.\n",
- d->name);
- return -ENODEV;
- }
-
- /*
- * Now the chipset is configured we can let the core
- * do all the device setup for us
- */
-
- ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
- hw[0].irq = 14;
- hw[1].irq = 15;
-
- return ide_host_add(d, hws, 2, NULL);
-}
-
-static const struct pci_device_id cs5520_pci_tbl[] = {
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 },
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
-
-static struct pci_driver cs5520_pci_driver = {
- .name = "Cyrix_IDE",
- .id_table = cs5520_pci_tbl,
- .probe = cs5520_init_one,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cs5520_ide_init(void)
-{
- return ide_pci_register_driver(&cs5520_pci_driver);
-}
-
-module_init(cs5520_ide_init);
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
deleted file mode 100644
index 65371599b976..000000000000
--- a/drivers/ide/cs5530.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Copyright (C) 2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2000 Mark Lord <mlord@...ox.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Development of this chipset driver was funded
- * by the nice folks at National Semiconductor.
- *
- * Documentation:
- * CS5530 documentation available from National Semiconductor.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cs5530"
-
-/*
- * Here are the standard PIO mode 0-4 timings for each "format".
- * Format-0 uses fast data reg timings, with slower command reg timings.
- * Format-1 uses fast timings for all registers, but won't work with all drives.
- */
-static unsigned int cs5530_pio_timings[2][5] = {
- {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
- {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
-};
-
-/*
- * After chip reset, the PIO timings are set to 0x0000e132, which is not valid.
- */
-#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
-#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
-
-/**
- * cs5530_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Handles setting of PIO mode for the chipset.
- *
- * The init_hwif_cs5530() routine guarantees that all drives
- * will have valid default PIO timings set up before we get here.
- */
-
-static void cs5530_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned long basereg = CS5530_BASEREG(hwif);
- unsigned int format = (inl(basereg + 4) >> 31) & 1;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
-}
-
-/**
- * cs5530_udma_filter - UDMA filter
- * @drive: drive
- *
- * cs5530_udma_filter() does UDMA mask filtering for the given drive
- * taking into the consideration capabilities of the mate device.
- *
- * The CS5530 specifies that two drives sharing a cable cannot mix
- * UDMA/MDMA. It has to be one or the other, for the pair, though
- * different timings can still be chosen for each drive. We could
- * set the appropriate timing bits on the fly, but that might be
- * a bit confusing. So, for now we statically handle this requirement
- * by looking at our mate drive to see what it is capable of, before
- * choosing a mode for our own drive.
- *
- * Note: This relies on the fact we never fail from UDMA to MWDMA2
- * but instead drop to PIO.
- */
-
-static u8 cs5530_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid;
- u8 mask = hwif->ultra_mask;
-
- if (mate == NULL)
- goto out;
- mateid = mate->id;
-
- if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
- if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
- (mateid[ATA_ID_UDMA_MODES] & 7))
- goto out;
- if (mateid[ATA_ID_MWDMA_MODES] & 7)
- mask = 0;
- }
-out:
- return mask;
-}
-
-static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned long basereg;
- unsigned int reg, timings = 0;
-
- switch (drive->dma_mode) {
- case XFER_UDMA_0: timings = 0x00921250; break;
- case XFER_UDMA_1: timings = 0x00911140; break;
- case XFER_UDMA_2: timings = 0x00911030; break;
- case XFER_MW_DMA_0: timings = 0x00077771; break;
- case XFER_MW_DMA_1: timings = 0x00012121; break;
- case XFER_MW_DMA_2: timings = 0x00002020; break;
- }
- basereg = CS5530_BASEREG(hwif);
- reg = inl(basereg + 4); /* get drive0 config register */
- timings |= reg & 0x80000000; /* preserve PIO format bit */
- if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
- outl(timings, basereg + 4); /* write drive0 config register */
- } else {
- if (timings & 0x00100000)
- reg |= 0x00100000; /* enable UDMA timings for both drives */
- else
- reg &= ~0x00100000; /* disable UDMA timings for both drives */
- outl(reg, basereg + 4); /* write drive0 config register */
- outl(timings, basereg + 12); /* write drive1 config register */
- }
-}
-
-/**
- * init_chipset_5530 - set up 5530 bridge
- * @dev: PCI device
- *
- * Initialize the cs5530 bridge for reliable IDE DMA operation.
- */
-
-static int init_chipset_cs5530(struct pci_dev *dev)
-{
- struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
-
- if (pci_resource_start(dev, 4) == 0)
- return -EFAULT;
-
- dev = NULL;
- while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
- switch (dev->device) {
- case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
- master_0 = pci_dev_get(dev);
- break;
- case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
- cs5530_0 = pci_dev_get(dev);
- break;
- }
- }
- if (!master_0) {
- printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
- goto out;
- }
- if (!cs5530_0) {
- printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
- goto out;
- }
-
- /*
- * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530:
- * --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530
- */
-
- pci_set_master(cs5530_0);
- pci_try_set_mwi(cs5530_0);
-
- /*
- * Set PCI CacheLineSize to 16-bytes:
- * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
- */
-
- pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
-
- /*
- * Disable trapping of UDMA register accesses (Win98 hack):
- * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
- */
-
- pci_write_config_word(cs5530_0, 0xd0, 0x5006);
-
- /*
- * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
- * The other settings are what is necessary to get the register
- * into a sane state for IDE DMA operation.
- */
-
- pci_write_config_byte(master_0, 0x40, 0x1e);
-
- /*
- * Set max PCI burst size (16-bytes seems to work best):
- * 16bytes: set bit-1 at 0x41 (reg value of 0x16)
- * all others: clear bit-1 at 0x41, and do:
- * 128bytes: OR 0x00 at 0x41
- * 256bytes: OR 0x04 at 0x41
- * 512bytes: OR 0x08 at 0x41
- * 1024bytes: OR 0x0c at 0x41
- */
-
- pci_write_config_byte(master_0, 0x41, 0x14);
-
- /*
- * These settings are necessary to get the chip
- * into a sane state for IDE DMA operation.
- */
-
- pci_write_config_byte(master_0, 0x42, 0x00);
- pci_write_config_byte(master_0, 0x43, 0xc1);
-
-out:
- pci_dev_put(master_0);
- pci_dev_put(cs5530_0);
- return 0;
-}
-
-/**
- * init_hwif_cs5530 - initialise an IDE channel
- * @hwif: IDE to initialize
- *
- * This gets invoked by the IDE driver once for each channel. It
- * performs channel-specific pre-initialization before drive probing.
- */
-
-static void init_hwif_cs5530 (ide_hwif_t *hwif)
-{
- unsigned long basereg;
- u32 d0_timings;
-
- basereg = CS5530_BASEREG(hwif);
- d0_timings = inl(basereg + 0);
- if (CS5530_BAD_PIO(d0_timings))
- outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
- if (CS5530_BAD_PIO(inl(basereg + 8)))
- outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
-}
-
-static const struct ide_port_ops cs5530_port_ops = {
- .set_pio_mode = cs5530_set_pio_mode,
- .set_dma_mode = cs5530_set_dma_mode,
- .udma_filter = cs5530_udma_filter,
-};
-
-static const struct ide_port_info cs5530_chipset = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_cs5530,
- .init_hwif = init_hwif_cs5530,
- .port_ops = &cs5530_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_POST_SET_MODE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
-};
-
-static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &cs5530_chipset, NULL);
-}
-
-static const struct pci_device_id cs5530_pci_tbl[] = {
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
-
-static struct pci_driver cs5530_pci_driver = {
- .name = "CS5530 IDE",
- .id_table = cs5530_pci_tbl,
- .probe = cs5530_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cs5530_ide_init(void)
-{
- return ide_pci_register_driver(&cs5530_pci_driver);
-}
-
-static void __exit cs5530_ide_exit(void)
-{
- pci_unregister_driver(&cs5530_pci_driver);
-}
-
-module_init(cs5530_ide_init);
-module_exit(cs5530_ide_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
deleted file mode 100644
index 70fdbe3161f8..000000000000
--- a/drivers/ide/cs5535.c
+++ /dev/null
@@ -1,216 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * History:
- * 09/20/2005 - Jaya Kumar <jayakumar.ide@...il.com>
- * - Reworked tuneproc, set_drive, misc mods to prep for mainline
- * - Work was sponsored by CIS (M) Sdn Bhd.
- * Ported to Kernel 2.6.11 on June 26, 2005 by
- * Wolfgang Zuleger <wolfgang.zuleger@....de>
- * Alexander Kiausch <alex.kiausch@...nline.de>
- * Originally developed by AMD for 2.4/2.6
- *
- * Development of this chipset driver was funded
- * by the nice folks at National Semiconductor/AMD.
- *
- * Documentation:
- * CS5535 documentation available from AMD
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "cs5535"
-
-#define MSR_ATAC_BASE 0x51300000
-#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
-#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
-#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
-#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
-#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
-#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
-#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
-#define ATAC_RESET (MSR_ATAC_BASE+0x10)
-#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
-#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
-#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
-#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
-#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
-#define ATAC_BM0_CMD_PRIM 0x00
-#define ATAC_BM0_STS_PRIM 0x02
-#define ATAC_BM0_PRD 0x04
-#define CS5535_CABLE_DETECT 0x48
-
-/* Format I PIO settings. We separate out cmd and data for safer timings */
-
-static unsigned int cs5535_pio_cmd_timings[5] =
-{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
-static unsigned int cs5535_pio_dta_timings[5] =
-{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
-
-static unsigned int cs5535_mwdma_timings[3] =
-{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
-
-static unsigned int cs5535_udma_timings[5] =
-{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
-
-/* Macros to check if the register is the reset value - reset value is an
- invalid timing and indicates the register has not been set previously */
-
-#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
-#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
-
-/****
- * cs5535_set_speed - Configure the chipset to the new speed
- * @drive: Drive to set up
- * @speed: desired speed
- *
- * cs5535_set_speed() configures the chipset to a new speed.
- */
-static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
-{
- u32 reg = 0, dummy;
- u8 unit = drive->dn & 1;
-
- /* Set the PIO timings */
- if (speed < XFER_SW_DMA_0) {
- ide_drive_t *pair = ide_get_pair_dev(drive);
- u8 cmd, pioa;
-
- cmd = pioa = speed - XFER_PIO_0;
-
- if (pair) {
- u8 piob = pair->pio_mode - XFER_PIO_0;
-
- if (piob < cmd)
- cmd = piob;
- }
-
- /* Write the speed of the current drive */
- reg = (cs5535_pio_cmd_timings[cmd] << 16) |
- cs5535_pio_dta_timings[pioa];
- wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
-
- /* And if nessesary - change the speed of the other drive */
- rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
-
- if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
- cs5535_pio_cmd_timings[cmd]) {
- reg &= 0x0000FFFF;
- reg |= cs5535_pio_cmd_timings[cmd] << 16;
- wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
- }
-
- /* Set bit 31 of the DMA register for PIO format 1 timings */
- rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
- wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
- reg | 0x80000000UL, 0);
- } else {
- rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
-
- reg &= 0x80000000UL; /* Preserve the PIO format bit */
-
- if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
- reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
- else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
- else
- return;
-
- wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
- }
-}
-
-/**
- * cs5535_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Programs the chipset for DMA mode.
- */
-
-static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- cs5535_set_speed(drive, drive->dma_mode);
-}
-
-/**
- * cs5535_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * A callback from the upper layers for PIO-only tuning.
- */
-
-static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- cs5535_set_speed(drive, drive->pio_mode);
-}
-
-static u8 cs5535_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 bit;
-
- /* if a 80 wire cable was detected */
- pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
-
- return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops cs5535_port_ops = {
- .set_pio_mode = cs5535_set_pio_mode,
- .set_dma_mode = cs5535_set_dma_mode,
- .cable_detect = cs5535_cable_detect,
-};
-
-static const struct ide_port_info cs5535_chipset = {
- .name = DRV_NAME,
- .port_ops = &cs5535_port_ops,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
-};
-
-static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &cs5535_chipset, NULL);
-}
-
-static const struct pci_device_id cs5535_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
-
-static struct pci_driver cs5535_pci_driver = {
- .name = "CS5535_IDE",
- .id_table = cs5535_pci_tbl,
- .probe = cs5535_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cs5535_ide_init(void)
-{
- return ide_pci_register_driver(&cs5535_pci_driver);
-}
-
-static void __exit cs5535_ide_exit(void)
-{
- pci_unregister_driver(&cs5535_pci_driver);
-}
-
-module_init(cs5535_ide_init);
-module_exit(cs5535_ide_exit);
-
-MODULE_AUTHOR("AMD");
-MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
deleted file mode 100644
index 8b5ca145191b..000000000000
--- a/drivers/ide/cs5536.c
+++ /dev/null
@@ -1,294 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CS5536 PATA support
- * (C) 2007 Martin K. Petersen <mkp@....net>
- * (C) 2009 Bartlomiej Zolnierkiewicz
- *
- * Documentation:
- * Available from AMD web site.
- *
- * The IDE timing registers for the CS5536 live in the Geode Machine
- * Specific Register file and not PCI config space. Most BIOSes
- * virtualize the PCI registers so the chip looks like a standard IDE
- * controller. Unfortunately not all implementations get this right.
- * In particular some have problems with unaligned accesses to the
- * virtualized PCI registers. This driver always does full dword
- * writes to work around the issue. Also, in case of a bad BIOS this
- * driver can be loaded with the "msr=1" parameter which forces using
- * the Machine Specific Registers to configure the device.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <asm/msr.h>
-
-#define DRV_NAME "cs5536"
-
-enum {
- MSR_IDE_CFG = 0x51300010,
- PCI_IDE_CFG = 0x40,
-
- CFG = 0,
- DTC = 2,
- CAST = 3,
- ETC = 4,
-
- IDE_CFG_CHANEN = (1 << 1),
- IDE_CFG_CABLE = (1 << 17) | (1 << 16),
-
- IDE_D0_SHIFT = 24,
- IDE_D1_SHIFT = 16,
- IDE_DRV_MASK = 0xff,
-
- IDE_CAST_D0_SHIFT = 6,
- IDE_CAST_D1_SHIFT = 4,
- IDE_CAST_DRV_MASK = 0x3,
-
- IDE_CAST_CMD_SHIFT = 24,
- IDE_CAST_CMD_MASK = 0xff,
-
- IDE_ETC_UDMA_MASK = 0xc0,
-};
-
-static int use_msr;
-
-static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
-{
- if (unlikely(use_msr)) {
- u32 dummy;
-
- rdmsr(MSR_IDE_CFG + reg, *val, dummy);
- return 0;
- }
-
- return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
-}
-
-static int cs5536_write(struct pci_dev *pdev, int reg, int val)
-{
- if (unlikely(use_msr)) {
- wrmsr(MSR_IDE_CFG + reg, val, 0);
- return 0;
- }
-
- return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
-}
-
-static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
-{
- struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
- int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
- u32 dtc;
-
- cs5536_read(pdev, DTC, &dtc);
- dtc &= ~(IDE_DRV_MASK << dshift);
- dtc |= tim << dshift;
- cs5536_write(pdev, DTC, dtc);
-}
-
-/**
- * cs5536_cable_detect - detect cable type
- * @hwif: Port to detect on
- *
- * Perform cable detection for ATA66 capable cable.
- *
- * Returns a cable type.
- */
-
-static u8 cs5536_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u32 cfg;
-
- cs5536_read(pdev, CFG, &cfg);
-
- if (cfg & IDE_CFG_CABLE)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-/**
- * cs5536_set_pio_mode - PIO timing setup
- * @hwif: ATA port
- * @drive: ATA device
- */
-
-static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static const u8 drv_timings[5] = {
- 0x98, 0x55, 0x32, 0x21, 0x20,
- };
-
- static const u8 addr_timings[5] = {
- 0x2, 0x1, 0x0, 0x0, 0x0,
- };
-
- static const u8 cmd_timings[5] = {
- 0x99, 0x92, 0x90, 0x22, 0x20,
- };
-
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
- unsigned long timings = (unsigned long)ide_get_drivedata(drive);
- u32 cast;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- u8 cmd_pio = pio;
-
- if (pair)
- cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0);
-
- timings &= (IDE_DRV_MASK << 8);
- timings |= drv_timings[pio];
- ide_set_drivedata(drive, (void *)timings);
-
- cs5536_program_dtc(drive, drv_timings[pio]);
-
- cs5536_read(pdev, CAST, &cast);
-
- cast &= ~(IDE_CAST_DRV_MASK << cshift);
- cast |= addr_timings[pio] << cshift;
-
- cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
- cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
-
- cs5536_write(pdev, CAST, cast);
-}
-
-/**
- * cs5536_set_dma_mode - DMA timing setup
- * @hwif: ATA port
- * @drive: ATA device
- */
-
-static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static const u8 udma_timings[6] = {
- 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
- };
-
- static const u8 mwdma_timings[3] = {
- 0x67, 0x21, 0x20,
- };
-
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
- unsigned long timings = (unsigned long)ide_get_drivedata(drive);
- u32 etc;
- const u8 mode = drive->dma_mode;
-
- cs5536_read(pdev, ETC, &etc);
-
- if (mode >= XFER_UDMA_0) {
- etc &= ~(IDE_DRV_MASK << dshift);
- etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
- } else { /* MWDMA */
- etc &= ~(IDE_ETC_UDMA_MASK << dshift);
- timings &= IDE_DRV_MASK;
- timings |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
- ide_set_drivedata(drive, (void *)timings);
- }
-
- cs5536_write(pdev, ETC, etc);
-}
-
-static void cs5536_dma_start(ide_drive_t *drive)
-{
- unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-
- if (drive->current_speed < XFER_UDMA_0 &&
- (timings >> 8) != (timings & IDE_DRV_MASK))
- cs5536_program_dtc(drive, timings >> 8);
-
- ide_dma_start(drive);
-}
-
-static int cs5536_dma_end(ide_drive_t *drive)
-{
- int ret = ide_dma_end(drive);
- unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-
- if (drive->current_speed < XFER_UDMA_0 &&
- (timings >> 8) != (timings & IDE_DRV_MASK))
- cs5536_program_dtc(drive, timings & IDE_DRV_MASK);
-
- return ret;
-}
-
-static const struct ide_port_ops cs5536_port_ops = {
- .set_pio_mode = cs5536_set_pio_mode,
- .set_dma_mode = cs5536_set_dma_mode,
- .cable_detect = cs5536_cable_detect,
-};
-
-static const struct ide_dma_ops cs5536_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = cs5536_dma_start,
- .dma_end = cs5536_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info cs5536_info = {
- .name = DRV_NAME,
- .port_ops = &cs5536_port_ops,
- .dma_ops = &cs5536_dma_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
-};
-
-/**
- * cs5536_init_one
- * @dev: PCI device
- * @id: Entry in match table
- */
-
-static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- u32 cfg;
-
- if (use_msr)
- printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
-
- cs5536_read(dev, CFG, &cfg);
-
- if ((cfg & IDE_CFG_CHANEN) == 0) {
- printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
- return -ENODEV;
- }
-
- return ide_pci_init_one(dev, &cs5536_info, NULL);
-}
-
-static const struct pci_device_id cs5536_pci_tbl[] = {
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
- { },
-};
-
-static struct pci_driver cs5536_pci_driver = {
- .name = DRV_NAME,
- .id_table = cs5536_pci_tbl,
- .probe = cs5536_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-module_pci_driver(cs5536_pci_driver);
-
-MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
-
-module_param_named(msr, use_msr, int, 0644);
-MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
deleted file mode 100644
index bc01660ee8fd..000000000000
--- a/drivers/ide/cy82c693.c
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@...avista.net), Maintainer
- * Copyright (C) 1998-2002 Andre Hedrick <andre@...ux-ide.org>, Integrator
- * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
- *
- * CYPRESS CY82C693 chipset IDE controller
- *
- * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cy82c693"
-
-/*
- * NOTE: the value for busmaster timeout is tricky and I got it by
- * trial and error! By using a to low value will cause DMA timeouts
- * and drop IDE performance, and by using a to high value will cause
- * audio playback to scatter.
- * If you know a better value or how to calc it, please let me know.
- */
-
-/* twice the value written in cy82c693ub datasheet */
-#define BUSMASTER_TIMEOUT 0x50
-/*
- * the value above was tested on my machine and it seems to work okay
- */
-
-/* here are the offset definitions for the registers */
-#define CY82_IDE_CMDREG 0x04
-#define CY82_IDE_ADDRSETUP 0x48
-#define CY82_IDE_MASTER_IOR 0x4C
-#define CY82_IDE_MASTER_IOW 0x4D
-#define CY82_IDE_SLAVE_IOR 0x4E
-#define CY82_IDE_SLAVE_IOW 0x4F
-#define CY82_IDE_MASTER_8BIT 0x50
-#define CY82_IDE_SLAVE_8BIT 0x51
-
-#define CY82_INDEX_PORT 0x22
-#define CY82_DATA_PORT 0x23
-
-#define CY82_INDEX_CHANNEL0 0x30
-#define CY82_INDEX_CHANNEL1 0x31
-#define CY82_INDEX_TIMEOUT 0x32
-
-/*
- * set DMA mode a specific channel for CY82C693
- */
-
-static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- const u8 mode = drive->dma_mode;
- u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
-
- index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
-
- data = (mode & 3) | (single << 2);
-
- outb(index, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-
- /*
- * note: below we set the value for Bus Master IDE TimeOut Register
- * I'm not absolutely sure what this does, but it solved my problem
- * with IDE DMA and sound, so I now can play sound and work with
- * my IDE driver at the same time :-)
- *
- * If you know the correct (best) value for this register please
- * let me know - ASK
- */
-
- data = BUSMASTER_TIMEOUT;
- outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-}
-
-static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- const unsigned long T = 1000000 / bus_speed;
- unsigned int addrCtrl;
- struct ide_timing t;
- u8 time_16, time_8;
-
- /* select primary or secondary channel */
- if (drive->dn > 1) { /* drive is on the secondary channel */
- dev = pci_get_slot(dev->bus, dev->devfn+1);
- if (!dev) {
- printk(KERN_ERR "%s: tune_drive: "
- "Cannot find secondary interface!\n",
- drive->name);
- return;
- }
- }
-
- ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
-
- time_16 = clamp_val(t.recover - 1, 0, 15) |
- (clamp_val(t.active - 1, 0, 15) << 4);
- time_8 = clamp_val(t.act8b - 1, 0, 15) |
- (clamp_val(t.rec8b - 1, 0, 15) << 4);
-
- /* now let's write the clocks registers */
- if ((drive->dn & 1) == 0) {
- /*
- * set master drive
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= (~0xF);
- addrCtrl |= clamp_val(t.setup - 1, 0, 15);
- pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
- /* now let's set the remaining registers */
- pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
- pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
- pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
- } else {
- /*
- * set slave drive
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= (~0xF0);
- addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
- pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
- /* now let's set the remaining registers */
- pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
- pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
- pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
- }
- if (drive->dn > 1)
- pci_dev_put(dev);
-}
-
-static void init_iops_cy82c693(ide_hwif_t *hwif)
-{
- static ide_hwif_t *primary;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (PCI_FUNC(dev->devfn) == 1)
- primary = hwif;
- else {
- hwif->mate = primary;
- hwif->channel = 1;
- }
-}
-
-static const struct ide_port_ops cy82c693_port_ops = {
- .set_pio_mode = cy82c693_set_pio_mode,
- .set_dma_mode = cy82c693_set_dma_mode,
-};
-
-static const struct ide_port_info cy82c693_chipset = {
- .name = DRV_NAME,
- .init_iops = init_iops_cy82c693,
- .port_ops = &cy82c693_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int cy82c693_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- struct pci_dev *dev2;
- int ret = -ENODEV;
-
- /* CY82C693 is more than only a IDE controller.
- Function 1 is primary IDE channel, function 2 - secondary. */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
- PCI_FUNC(dev->devfn) == 1) {
- dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
- ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
- if (ret)
- pci_dev_put(dev2);
- }
- return ret;
-}
-
-static void cy82c693_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
- ide_pci_remove(dev);
- pci_dev_put(dev2);
-}
-
-static const struct pci_device_id cy82c693_pci_tbl[] = {
- { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
-
-static struct pci_driver cy82c693_pci_driver = {
- .name = "Cypress_IDE",
- .id_table = cy82c693_pci_tbl,
- .probe = cy82c693_init_one,
- .remove = cy82c693_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cy82c693_ide_init(void)
-{
- return ide_pci_register_driver(&cy82c693_pci_driver);
-}
-
-static void __exit cy82c693_ide_exit(void)
-{
- pci_unregister_driver(&cy82c693_pci_driver);
-}
-
-module_init(cy82c693_ide_init);
-module_exit(cy82c693_ide_exit);
-
-MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c
deleted file mode 100644
index 300daabaa575..000000000000
--- a/drivers/ide/delkin_cb.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Created 20 Oct 2004 by Mark Lord
- *
- * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
- *
- * Modeled after the 16-bit PCMCIA driver: ide-cs.c
- *
- * This is slightly peculiar, in that it is a PCI driver,
- * but is NOT an IDE PCI driver -- the IDE layer does not directly
- * support hot insertion/removal of PCI interfaces, so this driver
- * is unable to use the IDE PCI interfaces. Instead, it uses the
- * same interfaces as the ide-cs (PCMCIA) driver uses.
- * On the plus side, the driver is also smaller/simpler this way.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-
-/*
- * No chip documentation has yet been found,
- * so these configuration values were pulled from
- * a running Win98 system using "debug".
- * This gives around 3MByte/second read performance,
- * which is about 2/3 of what the chip is capable of.
- *
- * There is also a 4KByte mmio region on the card,
- * but its purpose has yet to be reverse-engineered.
- */
-static const u8 setup[] = {
- 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00,
- 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
-};
-
-static const struct ide_port_ops delkin_cb_port_ops = {
- .quirkproc = ide_undecoded_slave,
-};
-
-static int delkin_cb_init_chipset(struct pci_dev *dev)
-{
- unsigned long base = pci_resource_start(dev, 0);
- int i;
-
- outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
- inb(base + 0x17); /* read status to clear interrupts */
-
- for (i = 0; i < sizeof(setup); ++i) {
- if (setup[i])
- outb(setup[i], base + i);
- }
-
- return 0;
-}
-
-static const struct ide_port_info delkin_cb_port_info = {
- .port_ops = &delkin_cb_port_ops,
- .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
- IDE_HFLAG_NO_DMA,
- .irq_flags = IRQF_SHARED,
- .init_chipset = delkin_cb_init_chipset,
- .chipset = ide_pci,
-};
-
-static int delkin_cb_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_host *host;
- unsigned long base;
- int rc;
- struct ide_hw hw, *hws[] = { &hw };
-
- rc = pci_enable_device(dev);
- if (rc) {
- printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc);
- return rc;
- }
- rc = pci_request_regions(dev, "delkin_cb");
- if (rc) {
- printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc);
- pci_disable_device(dev);
- return rc;
- }
- base = pci_resource_start(dev, 0);
-
- delkin_cb_init_chipset(dev);
-
- memset(&hw, 0, sizeof(hw));
- ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
- hw.irq = dev->irq;
- hw.dev = &dev->dev;
-
- rc = ide_host_add(&delkin_cb_port_info, hws, 1, &host);
- if (rc)
- goto out_disable;
-
- pci_set_drvdata(dev, host);
-
- return 0;
-
-out_disable:
- pci_release_regions(dev);
- pci_disable_device(dev);
- return rc;
-}
-
-static void
-delkin_cb_remove (struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- ide_host_remove(host);
-
- pci_release_regions(dev);
- pci_disable_device(dev);
-}
-
-#ifdef CONFIG_PM
-static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
-{
- pci_save_state(dev);
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
-
- return 0;
-}
-
-static int delkin_cb_resume(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- int rc;
-
- pci_set_power_state(dev, PCI_D0);
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- pci_restore_state(dev);
- pci_set_master(dev);
-
- if (host->init_chipset)
- host->init_chipset(dev);
-
- return 0;
-}
-#else
-#define delkin_cb_suspend NULL
-#define delkin_cb_resume NULL
-#endif
-
-static struct pci_device_id delkin_cb_pci_tbl[] = {
- { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
-
-static struct pci_driver delkin_cb_pci_driver = {
- .name = "Delkin-ASKA-Workbit Cardbus IDE",
- .id_table = delkin_cb_pci_tbl,
- .probe = delkin_cb_probe,
- .remove = delkin_cb_remove,
- .suspend = delkin_cb_suspend,
- .resume = delkin_cb_resume,
-};
-
-module_pci_driver(delkin_cb_pci_driver);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c
deleted file mode 100644
index 714e8cd0fa49..000000000000
--- a/drivers/ide/dtc2278.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1996 Linus Torvalds & author (see below)
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "dtc2278"
-
-/*
- * Changing this #undef to #define may solve start up problems in some systems.
- */
-#undef ALWAYS_SET_DTC2278_PIO_MODE
-
-/*
- * From: andy@...cle.cts.com (Dyan Wile)
- *
- * Below is a patch for DTC-2278 - alike software-programmable controllers
- * The code enables the secondary IDE controller and the PIO4 (3?) timings on
- * the primary (EIDE). You may probably have to enable the 32-bit support to
- * get the full speed. You better get the disk interrupts disabled ( hdparm -u0
- * /dev/hd.. ) for the drives connected to the EIDE interface. (I get my
- * filesystem corrupted with -u1, but under heavy disk load only :-)
- *
- * This card is now forced to use the "serialize" feature,
- * and irq-unmasking is disallowed. If io_32bit is enabled,
- * it must be done for BOTH drives on each interface.
- *
- * This code was written for the DTC2278E, but might work with any of these:
- *
- * DTC2278S has only a single IDE interface.
- * DTC2278D has two IDE interfaces and is otherwise identical to the S version.
- * DTC2278E also has serial ports and a printer port
- * DTC2278EB: has onboard BIOS, and "works like a charm" -- Kent Bradford <kent@...ory.caltech.edu>
- *
- * There may be a fourth controller type. The S and D versions use the
- * Winbond chip, and I think the E version does also.
- *
- */
-
-static void sub22 (char b, char c)
-{
- int i;
-
- for(i = 0; i < 3; ++i) {
- inb(0x3f6);
- outb_p(b,0xb0);
- inb(0x3f6);
- outb_p(c,0xb4);
- inb(0x3f6);
- if(inb(0xb4) == c) {
- outb_p(7,0xb0);
- inb(0x3f6);
- return; /* success */
- }
- }
-}
-
-static DEFINE_SPINLOCK(dtc2278_lock);
-
-static void dtc2278_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned long flags;
-
- if (drive->pio_mode >= XFER_PIO_3) {
- spin_lock_irqsave(&dtc2278_lock, flags);
- /*
- * This enables PIO mode4 (3?) on the first interface
- */
- sub22(1,0xc3);
- sub22(0,0xa0);
- spin_unlock_irqrestore(&dtc2278_lock, flags);
- } else {
- /* we don't know how to set it back again.. */
- /* Actually we do - there is a data sheet available for the
- Winbond but does anyone actually care */
- }
-}
-
-static const struct ide_port_ops dtc2278_port_ops = {
- .set_pio_mode = dtc2278_set_pio_mode,
-};
-
-static const struct ide_port_info dtc2278_port_info __initconst = {
- .name = DRV_NAME,
- .chipset = ide_dtc2278,
- .port_ops = &dtc2278_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_NO_UNMASK_IRQS |
- IDE_HFLAG_IO_32BIT |
- /* disallow ->io_32bit changes */
- IDE_HFLAG_NO_IO_32BIT |
- IDE_HFLAG_NO_DMA |
- IDE_HFLAG_DTC2278,
- .pio_mask = ATA_PIO4,
-};
-
-static int __init dtc2278_probe(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- /*
- * This enables the second interface
- */
- outb_p(4,0xb0);
- inb(0x3f6);
- outb_p(0x20,0xb4);
- inb(0x3f6);
-#ifdef ALWAYS_SET_DTC2278_PIO_MODE
- /*
- * This enables PIO mode4 (3?) on the first interface
- * and may solve start-up problems for some people.
- */
- sub22(1,0xc3);
- sub22(0,0xa0);
-#endif
- local_irq_restore(flags);
-
- return ide_legacy_device_add(&dtc2278_port_info, 0);
-}
-
-static bool probe_dtc2278;
-
-module_param_named(probe, probe_dtc2278, bool, 0);
-MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
-
-static int __init dtc2278_init(void)
-{
- if (probe_dtc2278 == 0)
- return -ENODEV;
-
- if (dtc2278_probe()) {
- printk(KERN_ERR "dtc2278: ide interfaces already in use!\n");
- return -EBUSY;
- }
- return 0;
-}
-
-module_init(dtc2278_init);
-
-MODULE_AUTHOR("See Local File");
-MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
deleted file mode 100644
index a73a9dc17e4d..000000000000
--- a/drivers/ide/falconide.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Atari Falcon IDE Driver
- *
- * Created 12 Jul 1997 by Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_stdma.h>
-#include <asm/ide.h>
-
-#define DRV_NAME "falconide"
-
-#ifdef CONFIG_ATARI
- /*
- * falconide_intr_lock is used to obtain access to the IDE interrupt,
- * which is shared between several drivers.
- */
-
-static int falconide_intr_lock;
-
-static void falconide_release_lock(void)
-{
- if (falconide_intr_lock == 0) {
- printk(KERN_ERR "%s: bug\n", __func__);
- return;
- }
- falconide_intr_lock = 0;
- stdma_release();
-}
-
-static void falconide_get_lock(irq_handler_t handler, void *data)
-{
- if (falconide_intr_lock == 0) {
- stdma_lock(handler, data);
- falconide_intr_lock = 1;
- }
-}
-#endif
-
-static void falconide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
- __ide_mm_insw(data_addr, buf, (len + 1) / 2);
- return;
- }
-
- raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
-}
-
-static void falconide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
- __ide_mm_outsw(data_addr, buf, (len + 1) / 2);
- return;
- }
-
- raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
-}
-
-/* Atari has a byte-swapped IDE interface */
-static const struct ide_tp_ops falconide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = falconide_input_data,
- .output_data = falconide_output_data,
-};
-
-static const struct ide_port_info falconide_port_info = {
-#ifdef CONFIG_ATARI
- .get_lock = falconide_get_lock,
- .release_lock = falconide_release_lock,
-#endif
- .tp_ops = &falconide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_NO_DMA,
- .irq_flags = IRQF_SHARED,
- .chipset = ide_generic,
-};
-
-static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base,
- unsigned long ctl, int irq)
-{
- int i;
-
- memset(hw, 0, sizeof(*hw));
-
- hw->io_ports.data_addr = base;
-
- for (i = 1; i < 8; i++)
- hw->io_ports_array[i] = base + 1 + i * 4;
-
- hw->io_ports.ctl_addr = ctl + 1;
-
- hw->irq = irq;
-}
-
- /*
- * Probe for a Falcon IDE interface
- */
-
-static int __init falconide_init(struct platform_device *pdev)
-{
- struct resource *base_mem_res, *ctl_mem_res;
- struct resource *base_res, *ctl_res, *irq_res;
- struct ide_host *host;
- struct ide_hw hw, *hws[] = { &hw };
- int rc;
- int irq;
-
- dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 IDE controller\n");
-
- base_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (base_res && !devm_request_region(&pdev->dev, base_res->start,
- resource_size(base_res), DRV_NAME)) {
- dev_err(&pdev->dev, "resources busy\n");
- return -EBUSY;
- }
-
- ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (ctl_res && !devm_request_region(&pdev->dev, ctl_res->start,
- resource_size(ctl_res), DRV_NAME)) {
- dev_err(&pdev->dev, "resources busy\n");
- return -EBUSY;
- }
-
- base_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!base_mem_res)
- return -ENODEV;
-
- if (!devm_request_mem_region(&pdev->dev, base_mem_res->start,
- resource_size(base_mem_res), DRV_NAME)) {
- dev_err(&pdev->dev, "resources busy\n");
- return -EBUSY;
- }
-
- ctl_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!ctl_mem_res)
- return -ENODEV;
-
- if (MACH_IS_ATARI) {
- irq = IRQ_MFP_IDE;
- } else {
- irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (irq_res && irq_res->start > 0)
- irq = irq_res->start;
- else
- return -ENODEV;
- }
-
- falconide_setup_ports(&hw, base_mem_res->start, ctl_mem_res->start, irq);
-
- host = ide_host_alloc(&falconide_port_info, hws, 1);
- if (!host)
- return -ENOMEM;
-
- if (!MACH_IS_ATARI) {
- host->get_lock = NULL;
- host->release_lock = NULL;
- }
-
- if (host->get_lock)
- host->get_lock(NULL, NULL);
- rc = ide_host_register(host, &falconide_port_info, hws);
- if (host->release_lock)
- host->release_lock();
-
- if (rc)
- goto err_free;
-
- platform_set_drvdata(pdev, host);
- return 0;
-err_free:
- ide_host_free(host);
- return rc;
-}
-
-static int falconide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
-
- ide_host_remove(host);
-
- return 0;
-}
-
-static struct platform_driver ide_falcon_driver = {
- .remove = falconide_remove,
- .driver = {
- .name = "atari-falcon-ide",
- },
-};
-
-module_platform_driver_probe(ide_falcon_driver, falconide_init);
-
-MODULE_AUTHOR("Geert Uytterhoeven");
-MODULE_DESCRIPTION("low-level driver for Atari Falcon IDE");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:atari-falcon-ide");
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
deleted file mode 100644
index 901e6ebfeb96..000000000000
--- a/drivers/ide/gayle.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Amiga Gayle IDE Driver
- *
- * Created 9 Jul 1997 by Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/zorro.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amigayle.h>
-
-
- /*
- * Offsets from one of the above bases
- */
-
-#define GAYLE_CONTROL 0x101a
-
- /*
- * These are at different offsets from the base
- */
-
-#define GAYLE_IRQ_4000 0xdd3020 /* MSB = 1, Harddisk is source of */
-#define GAYLE_IRQ_1200 0xda9000 /* interrupt */
-
-
- /*
- * Offset of the secondary port for IDE doublers
- * Note that GAYLE_CONTROL is NOT available then!
- */
-
-#define GAYLE_NEXT_PORT 0x1000
-
-#define GAYLE_NUM_HWIFS 2
-#define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \
- GAYLE_NUM_HWIFS-1)
-#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
-
-static bool ide_doubler;
-module_param_named(doubler, ide_doubler, bool, 0);
-MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
-
- /*
- * Check and acknowledge the interrupt status
- */
-
-static int gayle_test_irq(ide_hwif_t *hwif)
-{
- unsigned char ch;
-
- ch = z_readb(hwif->io_ports.irq_addr);
- if (!(ch & GAYLE_IRQ_IDE))
- return 0;
- return 1;
-}
-
-static void gayle_a1200_clear_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- (void)z_readb(hwif->io_ports.status_addr);
- z_writeb(0x7c, hwif->io_ports.irq_addr);
-}
-
-static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
- unsigned long ctl, unsigned long irq_port)
-{
- int i;
-
- memset(hw, 0, sizeof(*hw));
-
- hw->io_ports.data_addr = base;
-
- for (i = 1; i < 8; i++)
- hw->io_ports_array[i] = base + 2 + i * 4;
-
- hw->io_ports.ctl_addr = ctl;
- hw->io_ports.irq_addr = irq_port;
-
- hw->irq = IRQ_AMIGA_PORTS;
-}
-
-static const struct ide_port_ops gayle_a4000_port_ops = {
- .test_irq = gayle_test_irq,
-};
-
-static const struct ide_port_ops gayle_a1200_port_ops = {
- .clear_irq = gayle_a1200_clear_irq,
- .test_irq = gayle_test_irq,
-};
-
-static const struct ide_port_info gayle_port_info = {
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_NO_DMA,
- .irq_flags = IRQF_SHARED,
- .chipset = ide_generic,
-};
-
- /*
- * Probe for a Gayle IDE interface (and optionally for an IDE doubler)
- */
-
-static int __init amiga_gayle_ide_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct gayle_ide_platform_data *pdata;
- unsigned long base, ctrlport, irqport;
- unsigned int i;
- int error;
- struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
- struct ide_port_info d = gayle_port_info;
- struct ide_host *host;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- if (!request_mem_region(res->start, resource_size(res), "IDE"))
- return -EBUSY;
-
- pdata = dev_get_platdata(&pdev->dev);
- pr_info("ide: Gayle IDE controller (A%u style%s)\n",
- pdata->explicit_ack ? 1200 : 4000,
- ide_doubler ? ", IDE doubler" : "");
-
- base = (unsigned long)ZTWO_VADDR(pdata->base);
- ctrlport = 0;
- irqport = (unsigned long)ZTWO_VADDR(pdata->irqport);
- if (pdata->explicit_ack)
- d.port_ops = &gayle_a1200_port_ops;
- else
- d.port_ops = &gayle_a4000_port_ops;
-
- for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) {
- if (GAYLE_HAS_CONTROL_REG)
- ctrlport = base + GAYLE_CONTROL;
-
- gayle_setup_ports(&hw[i], base, ctrlport, irqport);
- hws[i] = &hw[i];
- }
-
- error = ide_host_add(&d, hws, i, &host);
- if (error)
- goto out;
-
- platform_set_drvdata(pdev, host);
- return 0;
-
-out:
- release_mem_region(res->start, resource_size(res));
- return error;
-}
-
-static int __exit amiga_gayle_ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- ide_host_remove(host);
- release_mem_region(res->start, resource_size(res));
- return 0;
-}
-
-static struct platform_driver amiga_gayle_ide_driver = {
- .remove = __exit_p(amiga_gayle_ide_remove),
- .driver = {
- .name = "amiga-gayle-ide",
- },
-};
-
-module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:amiga-gayle-ide");
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
deleted file mode 100644
index 50c9a41467c8..000000000000
--- a/drivers/ide/hpt366.c
+++ /dev/null
@@ -1,1545 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1999-2003 Andre Hedrick <andre@...ux-ide.org>
- * Portions Copyright (C) 2001 Sun Microsystems, Inc.
- * Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
- *
- * Thanks to HighPoint Technologies for their assistance, and hardware.
- * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
- * donation of an ABit BP6 mainboard, processor, and memory acellerated
- * development and support.
- *
- *
- * HighPoint has its own drivers (open source except for the RAID part)
- * available from http://www.highpoint-tech.com/USA_new/service_support.htm
- * This may be useful to anyone wanting to work on this driver, however do not
- * trust them too much since the code tends to become less and less meaningful
- * as the time passes... :-/
- *
- * Note that final HPT370 support was done by force extraction of GPL.
- *
- * - add function for getting/setting power status of drive
- * - the HPT370's state machine can get confused. reset it before each dma
- * xfer to prevent that from happening.
- * - reset state engine whenever we get an error.
- * - check for busmaster state at end of dma.
- * - use new highpoint timings.
- * - detect bus speed using highpoint register.
- * - use pll if we don't have a clock table. added a 66MHz table that's
- * just 2x the 33MHz table.
- * - removed turnaround. NOTE: we never want to switch between pll and
- * pci clocks as the chip can glitch in those cases. the highpoint
- * approved workaround slows everything down too much to be useful. in
- * addition, we would have to serialize access to each chip.
- * Adrian Sun <a.sun@....com>
- *
- * add drive timings for 66MHz PCI bus,
- * fix ATA Cable signal detection, fix incorrect /proc info
- * add /proc display for per-drive PIO/DMA/UDMA mode and
- * per-channel ATA-33/66 Cable detect.
- * Duncan Laurie <void@....com>
- *
- * fixup /proc output for multiple controllers
- * Tim Hockin <thockin@....com>
- *
- * On hpt366:
- * Reset the hpt366 on error, reset on dma
- * Fix disabling Fast Interrupt hpt366.
- * Mike Waychison <crlf@....com>
- *
- * Added support for 372N clocking and clock switching. The 372N needs
- * different clocks on read/write. This requires overloading rw_disk and
- * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for
- * keeping me sane.
- * Alan Cox <alan@...rguk.ukuu.org.uk>
- *
- * - fix the clock turnaround code: it was writing to the wrong ports when
- * called for the secondary channel, caching the current clock mode per-
- * channel caused the cached register value to get out of sync with the
- * actual one, the channels weren't serialized, the turnaround shouldn't
- * be done on 66 MHz PCI bus
- * - disable UltraATA/100 for HPT370 by default as the 33 MHz clock being used
- * does not allow for this speed anyway
- * - avoid touching disabled channels (e.g. HPT371/N are single channel chips,
- * their primary channel is kind of virtual, it isn't tied to any pins)
- * - fix/remove bad/unused timing tables and use one set of tables for the whole
- * HPT37x chip family; save space by introducing the separate transfer mode
- * table in which the mode lookup is done
- * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives
- * the wrong PCI frequency since DPLL has already been calibrated by BIOS;
- * read it only from the function 0 of HPT374 chips
- * - fix the hotswap code: it caused RESET- to glitch when tristating the bus,
- * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead
- * - pass to init_chipset() handlers a copy of the IDE PCI device structure as
- * they tamper with its fields
- * - pass to the init_setup handlers a copy of the ide_pci_device_t structure
- * since they may tamper with its fields
- * - prefix the driver startup messages with the real chip name
- * - claim the extra 240 bytes of I/O space for all chips
- * - optimize the UltraDMA filtering and the drive list lookup code
- * - use pci_get_slot() to get to the function 1 of HPT36x/374
- * - cache offset of the channel's misc. control registers (MCRs) being used
- * throughout the driver
- * - only touch the relevant MCR when detecting the cable type on HPT374's
- * function 1
- * - rename all the register related variables consistently
- * - move all the interrupt twiddling code from the speedproc handlers into
- * init_hwif_hpt366(), also grouping all the DMA related code together there
- * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and
- * separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
- * when setting an UltraDMA mode
- * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
- * the best possible one
- * - clean up DMA timeout handling for HPT370
- * - switch to using the enumeration type to differ between the numerous chip
- * variants, matching PCI device/revision ID with the chip type early, at the
- * init_setup stage
- * - extend the hpt_info structure to hold the DPLL and PCI clock frequencies,
- * stop duplicating it for each channel by storing the pointer in the pci_dev
- * structure: first, at the init_setup stage, point it to a static "template"
- * with only the chip type and its specific base DPLL frequency, the highest
- * UltraDMA mode, and the chip settings table pointer filled, then, at the
- * init_chipset stage, allocate per-chip instance and fill it with the rest
- * of the necessary information
- * - get rid of the constant thresholds in the HPT37x PCI clock detection code,
- * switch to calculating PCI clock frequency based on the chip's base DPLL
- * frequency
- * - switch to using the DPLL clock and enable UltraATA/133 mode by default on
- * anything newer than HPT370/A (except HPT374 that is not capable of this
- * mode according to the manual)
- * - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(),
- * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips;
- * unify HPT36x/37x timing setup code and the speedproc handlers by joining
- * the register setting lists into the table indexed by the clock selected
- * - set the correct hwif->ultra_mask for each individual chip
- * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
- * - stop resetting HPT370's state machine before each DMA transfer as that has
- * caused more harm than good
- * Sergei Shtylyov, <sshtylyov@...mvista.com> or <source@...sta.com>
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/slab.h>
-
-#include <linux/uaccess.h>
-#include <asm/io.h>
-
-#define DRV_NAME "hpt366"
-
-/* various tuning parameters */
-#undef HPT_RESET_STATE_ENGINE
-#undef HPT_DELAY_INTERRUPT
-
-static const char *bad_ata100_5[] = {
- "IBM-DTLA-307075",
- "IBM-DTLA-307060",
- "IBM-DTLA-307045",
- "IBM-DTLA-307030",
- "IBM-DTLA-307020",
- "IBM-DTLA-307015",
- "IBM-DTLA-305040",
- "IBM-DTLA-305030",
- "IBM-DTLA-305020",
- "IC35L010AVER07-0",
- "IC35L020AVER07-0",
- "IC35L030AVER07-0",
- "IC35L040AVER07-0",
- "IC35L060AVER07-0",
- "WDC AC310200R",
- NULL
-};
-
-static const char *bad_ata66_4[] = {
- "IBM-DTLA-307075",
- "IBM-DTLA-307060",
- "IBM-DTLA-307045",
- "IBM-DTLA-307030",
- "IBM-DTLA-307020",
- "IBM-DTLA-307015",
- "IBM-DTLA-305040",
- "IBM-DTLA-305030",
- "IBM-DTLA-305020",
- "IC35L010AVER07-0",
- "IC35L020AVER07-0",
- "IC35L030AVER07-0",
- "IC35L040AVER07-0",
- "IC35L060AVER07-0",
- "WDC AC310200R",
- "MAXTOR STM3320620A",
- NULL
-};
-
-static const char *bad_ata66_3[] = {
- "WDC AC310200R",
- NULL
-};
-
-static const char *bad_ata33[] = {
- "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
- "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
- "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
- "Maxtor 90510D4",
- "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
- "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
- "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
- NULL
-};
-
-static u8 xfer_speeds[] = {
- XFER_UDMA_6,
- XFER_UDMA_5,
- XFER_UDMA_4,
- XFER_UDMA_3,
- XFER_UDMA_2,
- XFER_UDMA_1,
- XFER_UDMA_0,
-
- XFER_MW_DMA_2,
- XFER_MW_DMA_1,
- XFER_MW_DMA_0,
-
- XFER_PIO_4,
- XFER_PIO_3,
- XFER_PIO_2,
- XFER_PIO_1,
- XFER_PIO_0
-};
-
-/* Key for bus clock timings
- * 36x 37x
- * bits bits
- * 0:3 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
- * cycles = value + 1
- * 4:7 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
- * cycles = value + 1
- * 8:11 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
- * register access.
- * 12:15 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file
- * register access.
- * 16:18 18:20 udma_cycle_time. Clock cycles for UDMA xfer.
- * - 21 CLK frequency: 0=ATA clock, 1=dual ATA clock.
- * 19:21 22:24 pre_high_time. Time to initialize the 1st cycle for PIO and
- * MW DMA xfer.
- * 22:24 25:27 cmd_pre_high_time. Time to initialize the 1st PIO cycle for
- * task file register access.
- * 28 28 UDMA enable.
- * 29 29 DMA enable.
- * 30 30 PIO MST enable. If set, the chip is in bus master mode during
- * PIO xfer.
- * 31 31 FIFO enable.
- */
-
-static u32 forty_base_hpt36x[] = {
- /* XFER_UDMA_6 */ 0x900fd943,
- /* XFER_UDMA_5 */ 0x900fd943,
- /* XFER_UDMA_4 */ 0x900fd943,
- /* XFER_UDMA_3 */ 0x900ad943,
- /* XFER_UDMA_2 */ 0x900bd943,
- /* XFER_UDMA_1 */ 0x9008d943,
- /* XFER_UDMA_0 */ 0x9008d943,
-
- /* XFER_MW_DMA_2 */ 0xa008d943,
- /* XFER_MW_DMA_1 */ 0xa010d955,
- /* XFER_MW_DMA_0 */ 0xa010d9fc,
-
- /* XFER_PIO_4 */ 0xc008d963,
- /* XFER_PIO_3 */ 0xc010d974,
- /* XFER_PIO_2 */ 0xc010d997,
- /* XFER_PIO_1 */ 0xc010d9c7,
- /* XFER_PIO_0 */ 0xc018d9d9
-};
-
-static u32 thirty_three_base_hpt36x[] = {
- /* XFER_UDMA_6 */ 0x90c9a731,
- /* XFER_UDMA_5 */ 0x90c9a731,
- /* XFER_UDMA_4 */ 0x90c9a731,
- /* XFER_UDMA_3 */ 0x90cfa731,
- /* XFER_UDMA_2 */ 0x90caa731,
- /* XFER_UDMA_1 */ 0x90cba731,
- /* XFER_UDMA_0 */ 0x90c8a731,
-
- /* XFER_MW_DMA_2 */ 0xa0c8a731,
- /* XFER_MW_DMA_1 */ 0xa0c8a732, /* 0xa0c8a733 */
- /* XFER_MW_DMA_0 */ 0xa0c8a797,
-
- /* XFER_PIO_4 */ 0xc0c8a731,
- /* XFER_PIO_3 */ 0xc0c8a742,
- /* XFER_PIO_2 */ 0xc0d0a753,
- /* XFER_PIO_1 */ 0xc0d0a7a3, /* 0xc0d0a793 */
- /* XFER_PIO_0 */ 0xc0d0a7aa /* 0xc0d0a7a7 */
-};
-
-static u32 twenty_five_base_hpt36x[] = {
- /* XFER_UDMA_6 */ 0x90c98521,
- /* XFER_UDMA_5 */ 0x90c98521,
- /* XFER_UDMA_4 */ 0x90c98521,
- /* XFER_UDMA_3 */ 0x90cf8521,
- /* XFER_UDMA_2 */ 0x90cf8521,
- /* XFER_UDMA_1 */ 0x90cb8521,
- /* XFER_UDMA_0 */ 0x90cb8521,
-
- /* XFER_MW_DMA_2 */ 0xa0ca8521,
- /* XFER_MW_DMA_1 */ 0xa0ca8532,
- /* XFER_MW_DMA_0 */ 0xa0ca8575,
-
- /* XFER_PIO_4 */ 0xc0ca8521,
- /* XFER_PIO_3 */ 0xc0ca8532,
- /* XFER_PIO_2 */ 0xc0ca8542,
- /* XFER_PIO_1 */ 0xc0d08572,
- /* XFER_PIO_0 */ 0xc0d08585
-};
-
-/*
- * The following are the new timing tables with PIO mode data/taskfile transfer
- * overclocking fixed...
- */
-
-/* This table is taken from the HPT370 data manual rev. 1.02 */
-static u32 thirty_three_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */
- /* XFER_UDMA_5 */ 0x16455031,
- /* XFER_UDMA_4 */ 0x16455031,
- /* XFER_UDMA_3 */ 0x166d5031,
- /* XFER_UDMA_2 */ 0x16495031,
- /* XFER_UDMA_1 */ 0x164d5033,
- /* XFER_UDMA_0 */ 0x16515097,
-
- /* XFER_MW_DMA_2 */ 0x26515031,
- /* XFER_MW_DMA_1 */ 0x26515033,
- /* XFER_MW_DMA_0 */ 0x26515097,
-
- /* XFER_PIO_4 */ 0x06515021,
- /* XFER_PIO_3 */ 0x06515022,
- /* XFER_PIO_2 */ 0x06515033,
- /* XFER_PIO_1 */ 0x06915065,
- /* XFER_PIO_0 */ 0x06d1508a
-};
-
-static u32 fifty_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1a861842,
- /* XFER_UDMA_5 */ 0x1a861842,
- /* XFER_UDMA_4 */ 0x1aae1842,
- /* XFER_UDMA_3 */ 0x1a8e1842,
- /* XFER_UDMA_2 */ 0x1a0e1842,
- /* XFER_UDMA_1 */ 0x1a161854,
- /* XFER_UDMA_0 */ 0x1a1a18ea,
-
- /* XFER_MW_DMA_2 */ 0x2a821842,
- /* XFER_MW_DMA_1 */ 0x2a821854,
- /* XFER_MW_DMA_0 */ 0x2a8218ea,
-
- /* XFER_PIO_4 */ 0x0a821842,
- /* XFER_PIO_3 */ 0x0a821843,
- /* XFER_PIO_2 */ 0x0a821855,
- /* XFER_PIO_1 */ 0x0ac218a8,
- /* XFER_PIO_0 */ 0x0b02190c
-};
-
-static u32 sixty_six_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1c86fe62,
- /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */
- /* XFER_UDMA_4 */ 0x1c8afe62,
- /* XFER_UDMA_3 */ 0x1c8efe62,
- /* XFER_UDMA_2 */ 0x1c92fe62,
- /* XFER_UDMA_1 */ 0x1c9afe62,
- /* XFER_UDMA_0 */ 0x1c82fe62,
-
- /* XFER_MW_DMA_2 */ 0x2c82fe62,
- /* XFER_MW_DMA_1 */ 0x2c82fe66,
- /* XFER_MW_DMA_0 */ 0x2c82ff2e,
-
- /* XFER_PIO_4 */ 0x0c82fe62,
- /* XFER_PIO_3 */ 0x0c82fe84,
- /* XFER_PIO_2 */ 0x0c82fea6,
- /* XFER_PIO_1 */ 0x0d02ff26,
- /* XFER_PIO_0 */ 0x0d42ff7f
-};
-
-#define HPT371_ALLOW_ATA133_6 1
-#define HPT302_ALLOW_ATA133_6 1
-#define HPT372_ALLOW_ATA133_6 1
-#define HPT370_ALLOW_ATA100_5 0
-#define HPT366_ALLOW_ATA66_4 1
-#define HPT366_ALLOW_ATA66_3 1
-
-/* Supported ATA clock frequencies */
-enum ata_clock {
- ATA_CLOCK_25MHZ,
- ATA_CLOCK_33MHZ,
- ATA_CLOCK_40MHZ,
- ATA_CLOCK_50MHZ,
- ATA_CLOCK_66MHZ,
- NUM_ATA_CLOCKS
-};
-
-struct hpt_timings {
- u32 pio_mask;
- u32 dma_mask;
- u32 ultra_mask;
- u32 *clock_table[NUM_ATA_CLOCKS];
-};
-
-/*
- * Hold all the HighPoint chip information in one place.
- */
-
-struct hpt_info {
- char *chip_name; /* Chip name */
- u8 chip_type; /* Chip type */
- u8 udma_mask; /* Allowed UltraDMA modes mask. */
- u8 dpll_clk; /* DPLL clock in MHz */
- u8 pci_clk; /* PCI clock in MHz */
- struct hpt_timings *timings; /* Chipset timing data */
- u8 clock; /* ATA clock selected */
-};
-
-/* Supported HighPoint chips */
-enum {
- HPT36x,
- HPT370,
- HPT370A,
- HPT374,
- HPT372,
- HPT372A,
- HPT302,
- HPT371,
- HPT372N,
- HPT302N,
- HPT371N
-};
-
-static struct hpt_timings hpt36x_timings = {
- .pio_mask = 0xc1f8ffff,
- .dma_mask = 0x303800ff,
- .ultra_mask = 0x30070000,
- .clock_table = {
- [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x,
- [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x,
- [ATA_CLOCK_40MHZ] = forty_base_hpt36x,
- [ATA_CLOCK_50MHZ] = NULL,
- [ATA_CLOCK_66MHZ] = NULL
- }
-};
-
-static struct hpt_timings hpt37x_timings = {
- .pio_mask = 0xcfc3ffff,
- .dma_mask = 0x31c001ff,
- .ultra_mask = 0x303c0000,
- .clock_table = {
- [ATA_CLOCK_25MHZ] = NULL,
- [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x,
- [ATA_CLOCK_40MHZ] = NULL,
- [ATA_CLOCK_50MHZ] = fifty_base_hpt37x,
- [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x
- }
-};
-
-static const struct hpt_info hpt36x = {
- .chip_name = "HPT36x",
- .chip_type = HPT36x,
- .udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
- .dpll_clk = 0, /* no DPLL */
- .timings = &hpt36x_timings
-};
-
-static const struct hpt_info hpt370 = {
- .chip_name = "HPT370",
- .chip_type = HPT370,
- .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
- .dpll_clk = 48,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt370a = {
- .chip_name = "HPT370A",
- .chip_type = HPT370A,
- .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
- .dpll_clk = 48,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt374 = {
- .chip_name = "HPT374",
- .chip_type = HPT374,
- .udma_mask = ATA_UDMA5,
- .dpll_clk = 48,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt372 = {
- .chip_name = "HPT372",
- .chip_type = HPT372,
- .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 55,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt372a = {
- .chip_name = "HPT372A",
- .chip_type = HPT372A,
- .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 66,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt302 = {
- .chip_name = "HPT302",
- .chip_type = HPT302,
- .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 66,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt371 = {
- .chip_name = "HPT371",
- .chip_type = HPT371,
- .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 66,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt372n = {
- .chip_name = "HPT372N",
- .chip_type = HPT372N,
- .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 77,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt302n = {
- .chip_name = "HPT302N",
- .chip_type = HPT302N,
- .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 77,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt371n = {
- .chip_name = "HPT371N",
- .chip_type = HPT371N,
- .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 77,
- .timings = &hpt37x_timings
-};
-
-static bool check_in_drive_list(ide_drive_t *drive, const char **list)
-{
- return match_string(list, -1, (char *)&drive->id[ATA_ID_PROD]) >= 0;
-}
-
-static struct hpt_info *hpt3xx_get_info(struct device *dev)
-{
- struct ide_host *host = dev_get_drvdata(dev);
- struct hpt_info *info = (struct hpt_info *)host->host_priv;
-
- return dev == host->dev[1] ? info + 1 : info;
-}
-
-/*
- * The Marvell bridge chips used on the HighPoint SATA cards do not seem
- * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
- */
-
-static u8 hpt3xx_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- u8 mask = hwif->ultra_mask;
-
- switch (info->chip_type) {
- case HPT36x:
- if (!HPT366_ALLOW_ATA66_4 ||
- check_in_drive_list(drive, bad_ata66_4))
- mask = ATA_UDMA3;
-
- if (!HPT366_ALLOW_ATA66_3 ||
- check_in_drive_list(drive, bad_ata66_3))
- mask = ATA_UDMA2;
- break;
- case HPT370:
- if (!HPT370_ALLOW_ATA100_5 ||
- check_in_drive_list(drive, bad_ata100_5))
- mask = ATA_UDMA4;
- break;
- case HPT370A:
- if (!HPT370_ALLOW_ATA100_5 ||
- check_in_drive_list(drive, bad_ata100_5))
- return ATA_UDMA4;
- fallthrough;
- case HPT372 :
- case HPT372A:
- case HPT372N:
- case HPT374 :
- if (ata_id_is_sata(drive->id))
- mask &= ~0x0e;
- fallthrough;
- default:
- return mask;
- }
-
- return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
-}
-
-static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
-
- switch (info->chip_type) {
- case HPT372 :
- case HPT372A:
- case HPT372N:
- case HPT374 :
- if (ata_id_is_sata(drive->id))
- return 0x00;
- fallthrough;
- default:
- return 0x07;
- }
-}
-
-static u32 get_speed_setting(u8 speed, struct hpt_info *info)
-{
- int i;
-
- /*
- * Lookup the transfer mode table to get the index into
- * the timing table.
- *
- * NOTE: For XFER_PIO_SLOW, PIO mode 0 timings will be used.
- */
- for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
- if (xfer_speeds[i] == speed)
- break;
-
- return info->timings->clock_table[info->clock][i];
-}
-
-static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- struct hpt_timings *t = info->timings;
- u8 itr_addr = 0x40 + (drive->dn * 4);
- u32 old_itr = 0;
- const u8 speed = drive->dma_mode;
- u32 new_itr = get_speed_setting(speed, info);
- u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
- (speed < XFER_UDMA_0 ? t->dma_mask :
- t->ultra_mask);
-
- pci_read_config_dword(dev, itr_addr, &old_itr);
- new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
- /*
- * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
- * to avoid problems handling I/O errors later
- */
- new_itr &= ~0xc0000000;
-
- pci_write_config_dword(dev, itr_addr, new_itr);
-}
-
-static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- hpt3xx_set_mode(hwif, drive);
-}
-
-static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
-
- if ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
- return;
-
- if (info->chip_type >= HPT370) {
- u8 scr1 = 0;
-
- pci_read_config_byte(dev, 0x5a, &scr1);
- if (((scr1 & 0x10) >> 4) != mask) {
- if (mask)
- scr1 |= 0x10;
- else
- scr1 &= ~0x10;
- pci_write_config_byte(dev, 0x5a, scr1);
- }
- } else if (mask)
- disable_irq(hwif->irq);
- else
- enable_irq(hwif->irq);
-}
-
-/*
- * This is specific to the HPT366 UDMA chipset
- * by HighPoint|Triones Technologies, Inc.
- */
-static void hpt366_dma_lost_irq(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
-
- pci_read_config_byte(dev, 0x50, &mcr1);
- pci_read_config_byte(dev, 0x52, &mcr3);
- pci_read_config_byte(dev, 0x5a, &scr1);
- printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
- drive->name, __func__, mcr1, mcr3, scr1);
- if (scr1 & 0x10)
- pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
- ide_dma_lost_irq(drive);
-}
-
-static void hpt370_clear_engine(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- pci_write_config_byte(dev, hwif->select_data, 0x37);
- udelay(10);
-}
-
-static void hpt370_irq_timeout(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 bfifo = 0;
- u8 dma_cmd;
-
- pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
- printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
-
- /* get DMA command mode */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- /* stop DMA */
- outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
- hpt370_clear_engine(drive);
-}
-
-static void hpt370_dma_start(ide_drive_t *drive)
-{
-#ifdef HPT_RESET_STATE_ENGINE
- hpt370_clear_engine(drive);
-#endif
- ide_dma_start(drive);
-}
-
-static int hpt370_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-
- if (dma_stat & ATA_DMA_ACTIVE) {
- /* wait a little */
- udelay(20);
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & ATA_DMA_ACTIVE)
- hpt370_irq_timeout(drive);
- }
- return ide_dma_end(drive);
-}
-
-/* returns 1 if DMA IRQ issued, 0 otherwise */
-static int hpt374_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 bfifo = 0;
- u8 dma_stat;
-
- pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
- if (bfifo & 0x1FF) {
-// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
- return 0;
- }
-
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- /* return 1 if INTR asserted */
- if (dma_stat & ATA_DMA_INTR)
- return 1;
-
- return 0;
-}
-
-static int hpt374_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 mcr = 0, mcr_addr = hwif->select_data;
- u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x6a, &bwsr);
- pci_read_config_byte(dev, mcr_addr, &mcr);
- if (bwsr & mask)
- pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
- return ide_dma_end(drive);
-}
-
-/**
- * hpt3xxn_set_clock - perform clock switching dance
- * @hwif: hwif to switch
- * @mode: clocking mode (0x21 for write, 0x23 otherwise)
- *
- * Switch the DPLL clock on the HPT3xxN devices. This is a right mess.
- */
-
-static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
-{
- unsigned long base = hwif->extra_base;
- u8 scr2 = inb(base + 0x6b);
-
- if ((scr2 & 0x7f) == mode)
- return;
-
- /* Tristate the bus */
- outb(0x80, base + 0x63);
- outb(0x80, base + 0x67);
-
- /* Switch clock and reset channels */
- outb(mode, base + 0x6b);
- outb(0xc0, base + 0x69);
-
- /*
- * Reset the state machines.
- * NOTE: avoid accidentally enabling the disabled channels.
- */
- outb(inb(base + 0x60) | 0x32, base + 0x60);
- outb(inb(base + 0x64) | 0x32, base + 0x64);
-
- /* Complete reset */
- outb(0x00, base + 0x69);
-
- /* Reconnect channels to bus */
- outb(0x00, base + 0x63);
- outb(0x00, base + 0x67);
-}
-
-/**
- * hpt3xxn_rw_disk - prepare for I/O
- * @drive: drive for command
- * @rq: block request structure
- *
- * This is called when a disk I/O is issued to HPT3xxN.
- * We need it because of the clock switching.
- */
-
-static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
-{
- hpt3xxn_set_clock(drive->hwif, rq_data_dir(rq) ? 0x21 : 0x23);
-}
-
-/**
- * hpt37x_calibrate_dpll - calibrate the DPLL
- * @dev: PCI device
- *
- * Perform a calibration cycle on the DPLL.
- * Returns 1 if this succeeds
- */
-static int hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
-{
- u32 dpll = (f_high << 16) | f_low | 0x100;
- u8 scr2;
- int i;
-
- pci_write_config_dword(dev, 0x5c, dpll);
-
- /* Wait for oscillator ready */
- for(i = 0; i < 0x5000; ++i) {
- udelay(50);
- pci_read_config_byte(dev, 0x5b, &scr2);
- if (scr2 & 0x80)
- break;
- }
- /* See if it stays ready (we'll just bail out if it's not yet) */
- for(i = 0; i < 0x1000; ++i) {
- pci_read_config_byte(dev, 0x5b, &scr2);
- /* DPLL destabilized? */
- if(!(scr2 & 0x80))
- return 0;
- }
- /* Turn off tuning, we have the DPLL set */
- pci_read_config_dword (dev, 0x5c, &dpll);
- pci_write_config_dword(dev, 0x5c, (dpll & ~0x100));
- return 1;
-}
-
-static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
- u8 chip_type = info->chip_type;
- u8 new_mcr, old_mcr = 0;
-
- /*
- * Disable the "fast interrupt" prediction. Don't hold off
- * on interrupts. (== 0x01 despite what the docs say)
- */
- pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
-
- if (chip_type >= HPT374)
- new_mcr = old_mcr & ~0x07;
- else if (chip_type >= HPT370) {
- new_mcr = old_mcr;
- new_mcr &= ~0x02;
-#ifdef HPT_DELAY_INTERRUPT
- new_mcr &= ~0x01;
-#else
- new_mcr |= 0x01;
-#endif
- } else /* HPT366 and HPT368 */
- new_mcr = old_mcr & ~0x80;
-
- if (new_mcr != old_mcr)
- pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
-}
-
-static int init_chipset_hpt366(struct pci_dev *dev)
-{
- unsigned long io_base = pci_resource_start(dev, 4);
- struct hpt_info *info = hpt3xx_get_info(&dev->dev);
- const char *name = DRV_NAME;
- u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
- u8 chip_type;
- enum ata_clock clock;
-
- chip_type = info->chip_type;
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
- pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
- pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
-
- /*
- * First, try to estimate the PCI clock frequency...
- */
- if (chip_type >= HPT370) {
- u8 scr1 = 0;
- u16 f_cnt = 0;
- u32 temp = 0;
-
- /* Interrupt force enable. */
- pci_read_config_byte(dev, 0x5a, &scr1);
- if (scr1 & 0x10)
- pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
-
- /*
- * HighPoint does this for HPT372A.
- * NOTE: This register is only writeable via I/O space.
- */
- if (chip_type == HPT372A)
- outb(0x0e, io_base + 0x9c);
-
- /*
- * Default to PCI clock. Make sure MA15/16 are set to output
- * to prevent drives having problems with 40-pin cables.
- */
- pci_write_config_byte(dev, 0x5b, 0x23);
-
- /*
- * We'll have to read f_CNT value in order to determine
- * the PCI clock frequency according to the following ratio:
- *
- * f_CNT = Fpci * 192 / Fdpll
- *
- * First try reading the register in which the HighPoint BIOS
- * saves f_CNT value before reprogramming the DPLL from its
- * default setting (which differs for the various chips).
- *
- * NOTE: This register is only accessible via I/O space;
- * HPT374 BIOS only saves it for the function 0, so we have to
- * always read it from there -- no need to check the result of
- * pci_get_slot() for the function 0 as the whole device has
- * been already "pinned" (via function 1) in init_setup_hpt374()
- */
- if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
- struct pci_dev *dev1 = pci_get_slot(dev->bus,
- dev->devfn - 1);
- unsigned long io_base = pci_resource_start(dev1, 4);
-
- temp = inl(io_base + 0x90);
- pci_dev_put(dev1);
- } else
- temp = inl(io_base + 0x90);
-
- /*
- * In case the signature check fails, we'll have to
- * resort to reading the f_CNT register itself in hopes
- * that nobody has touched the DPLL yet...
- */
- if ((temp & 0xFFFFF000) != 0xABCDE000) {
- int i;
-
- printk(KERN_WARNING "%s %s: no clock data saved by "
- "BIOS\n", name, pci_name(dev));
-
- /* Calculate the average value of f_CNT. */
- for (temp = i = 0; i < 128; i++) {
- pci_read_config_word(dev, 0x78, &f_cnt);
- temp += f_cnt & 0x1ff;
- mdelay(1);
- }
- f_cnt = temp / 128;
- } else
- f_cnt = temp & 0x1ff;
-
- dpll_clk = info->dpll_clk;
- pci_clk = (f_cnt * dpll_clk) / 192;
-
- /* Clamp PCI clock to bands. */
- if (pci_clk < 40)
- pci_clk = 33;
- else if(pci_clk < 45)
- pci_clk = 40;
- else if(pci_clk < 55)
- pci_clk = 50;
- else
- pci_clk = 66;
-
- printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, "
- "assuming %d MHz PCI\n", name, pci_name(dev),
- dpll_clk, f_cnt, pci_clk);
- } else {
- u32 itr1 = 0;
-
- pci_read_config_dword(dev, 0x40, &itr1);
-
- /* Detect PCI clock by looking at cmd_high_time. */
- switch ((itr1 >> 8) & 0x0f) {
- case 0x09:
- pci_clk = 40;
- break;
- case 0x05:
- pci_clk = 25;
- break;
- case 0x07:
- default:
- pci_clk = 33;
- break;
- }
- }
-
- /* Let's assume we'll use PCI clock for the ATA clock... */
- switch (pci_clk) {
- case 25:
- clock = ATA_CLOCK_25MHZ;
- break;
- case 33:
- default:
- clock = ATA_CLOCK_33MHZ;
- break;
- case 40:
- clock = ATA_CLOCK_40MHZ;
- break;
- case 50:
- clock = ATA_CLOCK_50MHZ;
- break;
- case 66:
- clock = ATA_CLOCK_66MHZ;
- break;
- }
-
- /*
- * Only try the DPLL if we don't have a table for the PCI clock that
- * we are running at for HPT370/A, always use it for anything newer...
- *
- * NOTE: Using the internal DPLL results in slow reads on 33 MHz PCI.
- * We also don't like using the DPLL because this causes glitches
- * on PRST-/SRST- when the state engine gets reset...
- */
- if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) {
- u16 f_low, delta = pci_clk < 50 ? 2 : 4;
- int adjust;
-
- /*
- * Select 66 MHz DPLL clock only if UltraATA/133 mode is
- * supported/enabled, use 50 MHz DPLL clock otherwise...
- */
- if (info->udma_mask == ATA_UDMA6) {
- dpll_clk = 66;
- clock = ATA_CLOCK_66MHZ;
- } else if (dpll_clk) { /* HPT36x chips don't have DPLL */
- dpll_clk = 50;
- clock = ATA_CLOCK_50MHZ;
- }
-
- if (info->timings->clock_table[clock] == NULL) {
- printk(KERN_ERR "%s %s: unknown bus timing!\n",
- name, pci_name(dev));
- return -EIO;
- }
-
- /* Select the DPLL clock. */
- pci_write_config_byte(dev, 0x5b, 0x21);
-
- /*
- * Adjust the DPLL based upon PCI clock, enable it,
- * and wait for stabilization...
- */
- f_low = (pci_clk * 48) / dpll_clk;
-
- for (adjust = 0; adjust < 8; adjust++) {
- if(hpt37x_calibrate_dpll(dev, f_low, f_low + delta))
- break;
-
- /*
- * See if it'll settle at a fractionally different clock
- */
- if (adjust & 1)
- f_low -= adjust >> 1;
- else
- f_low += adjust >> 1;
- }
- if (adjust == 8) {
- printk(KERN_ERR "%s %s: DPLL did not stabilize!\n",
- name, pci_name(dev));
- return -EIO;
- }
-
- printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n",
- name, pci_name(dev), dpll_clk);
- } else {
- /* Mark the fact that we're not using the DPLL. */
- dpll_clk = 0;
-
- printk(KERN_INFO "%s %s: using %d MHz PCI clock\n",
- name, pci_name(dev), pci_clk);
- }
-
- /* Store the clock frequencies. */
- info->dpll_clk = dpll_clk;
- info->pci_clk = pci_clk;
- info->clock = clock;
-
- if (chip_type >= HPT370) {
- u8 mcr1, mcr4;
-
- /*
- * Reset the state engines.
- * NOTE: Avoid accidentally enabling the disabled channels.
- */
- pci_read_config_byte (dev, 0x50, &mcr1);
- pci_read_config_byte (dev, 0x54, &mcr4);
- pci_write_config_byte(dev, 0x50, (mcr1 | 0x32));
- pci_write_config_byte(dev, 0x54, (mcr4 | 0x32));
- udelay(100);
- }
-
- /*
- * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
- * the MISC. register to stretch the UltraDMA Tss timing.
- * NOTE: This register is only writeable via I/O space.
- */
- if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
- outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
-
- hpt3xx_disable_fast_irq(dev, 0x50);
- hpt3xx_disable_fast_irq(dev, 0x54);
-
- return 0;
-}
-
-static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- u8 chip_type = info->chip_type;
- u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
-
- /*
- * The HPT37x uses the CBLID pins as outputs for MA15/MA16
- * address lines to access an external EEPROM. To read valid
- * cable detect state the pins must be enabled as inputs.
- */
- if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
- /*
- * HPT374 PCI function 1
- * - set bit 15 of reg 0x52 to enable TCBLID as input
- * - set bit 15 of reg 0x56 to enable FCBLID as input
- */
- u8 mcr_addr = hwif->select_data + 2;
- u16 mcr;
-
- pci_read_config_word(dev, mcr_addr, &mcr);
- pci_write_config_word(dev, mcr_addr, mcr | 0x8000);
- /* Debounce, then read cable ID register */
- udelay(10);
- pci_read_config_byte(dev, 0x5a, &scr1);
- pci_write_config_word(dev, mcr_addr, mcr);
- } else if (chip_type >= HPT370) {
- /*
- * HPT370/372 and 374 pcifn 0
- * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
- */
- u8 scr2 = 0;
-
- pci_read_config_byte(dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, scr2 & ~1);
- /* Debounce, then read cable ID register */
- udelay(10);
- pci_read_config_byte(dev, 0x5a, &scr1);
- pci_write_config_byte(dev, 0x5b, scr2);
- } else
- pci_read_config_byte(dev, 0x5a, &scr1);
-
- return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static void init_hwif_hpt366(ide_hwif_t *hwif)
-{
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- u8 chip_type = info->chip_type;
-
- /* Cache the channel's MISC. control registers' offset */
- hwif->select_data = hwif->channel ? 0x54 : 0x50;
-
- /*
- * HPT3xxN chips have some complications:
- *
- * - on 33 MHz PCI we must clock switch
- * - on 66 MHz PCI we must NOT use the PCI clock
- */
- if (chip_type >= HPT372N && info->dpll_clk && info->pci_clk < 66) {
- /*
- * Clock is shared between the channels,
- * so we'll have to serialize them... :-(
- */
- hwif->host->host_flags |= IDE_HFLAG_SERIALIZE;
- hwif->rw_disk = &hpt3xxn_rw_disk;
- }
-}
-
-static int init_dma_hpt366(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags, base = ide_pci_dma_base(hwif, d);
- u8 dma_old, dma_new, masterdma = 0, slavedma = 0;
-
- if (base == 0)
- return -1;
-
- hwif->dma_base = base;
-
- if (ide_pci_check_simplex(hwif, d) < 0)
- return -1;
-
- if (ide_pci_set_master(dev, d->name) < 0)
- return -1;
-
- dma_old = inb(base + 2);
-
- local_irq_save(flags);
-
- dma_new = dma_old;
- pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma);
- pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma);
-
- if (masterdma & 0x30) dma_new |= 0x20;
- if ( slavedma & 0x30) dma_new |= 0x40;
- if (dma_new != dma_old)
- outb(dma_new, base + 2);
-
- local_irq_restore(flags);
-
- printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
- hwif->name, base, base + 7);
-
- hwif->extra_base = base + (hwif->channel ? 8 : 16);
-
- if (ide_allocate_dma_engine(hwif))
- return -1;
-
- return 0;
-}
-
-static void hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
-{
- if (dev2->irq != dev->irq) {
- /* FIXME: we need a core pci_set_interrupt() */
- dev2->irq = dev->irq;
- printk(KERN_INFO DRV_NAME " %s: PCI config space interrupt "
- "fixed\n", pci_name(dev2));
- }
-}
-
-static void hpt371_init(struct pci_dev *dev)
-{
- u8 mcr1 = 0;
-
- /*
- * HPT371 chips physically have only one channel, the secondary one,
- * but the primary channel registers do exist! Go figure...
- * So, we manually disable the non-existing channel here
- * (if the BIOS hasn't done this already).
- */
- pci_read_config_byte(dev, 0x50, &mcr1);
- if (mcr1 & 0x04)
- pci_write_config_byte(dev, 0x50, mcr1 & ~0x04);
-}
-
-static int hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
-{
- u8 mcr1 = 0, pin1 = 0, pin2 = 0;
-
- /*
- * Now we'll have to force both channels enabled if
- * at least one of them has been enabled by BIOS...
- */
- pci_read_config_byte(dev, 0x50, &mcr1);
- if (mcr1 & 0x30)
- pci_write_config_byte(dev, 0x50, mcr1 | 0x30);
-
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
- pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
-
- if (pin1 != pin2 && dev->irq == dev2->irq) {
- printk(KERN_INFO DRV_NAME " %s: onboard version of chipset, "
- "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
- return 1;
- }
-
- return 0;
-}
-
-#define IDE_HFLAGS_HPT3XX \
- (IDE_HFLAG_NO_ATAPI_DMA | \
- IDE_HFLAG_OFF_BOARD)
-
-static const struct ide_port_ops hpt3xx_port_ops = {
- .set_pio_mode = hpt3xx_set_pio_mode,
- .set_dma_mode = hpt3xx_set_mode,
- .maskproc = hpt3xx_maskproc,
- .mdma_filter = hpt3xx_mdma_filter,
- .udma_filter = hpt3xx_udma_filter,
- .cable_detect = hpt3xx_cable_detect,
-};
-
-static const struct ide_dma_ops hpt37x_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = hpt374_dma_end,
- .dma_test_irq = hpt374_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_dma_ops hpt370_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = hpt370_dma_start,
- .dma_end = hpt370_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_clear = hpt370_irq_timeout,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_dma_ops hpt36x_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = hpt366_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info hpt366_chipsets[] = {
- { /* 0: HPT36x */
- .name = DRV_NAME,
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- /*
- * HPT36x chips have one channel per function and have
- * both channel enable bits located differently and visible
- * to both functions -- really stupid design decision... :-(
- * Bit 4 is for the primary channel, bit 5 for the secondary.
- */
- .enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt36x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- },
- { /* 1: HPT3xx */
- .name = DRV_NAME,
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt37x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- }
-};
-
-/**
- * hpt366_init_one - called when an HPT366 is found
- * @dev: the hpt366 device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-static int hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct hpt_info *info = NULL;
- struct hpt_info *dyn_info;
- struct pci_dev *dev2 = NULL;
- struct ide_port_info d;
- u8 idx = id->driver_data;
- u8 rev = dev->revision;
- int ret;
-
- if ((idx == 0 || idx == 4) && (PCI_FUNC(dev->devfn) & 1))
- return -ENODEV;
-
- switch (idx) {
- case 0:
- if (rev < 3)
- info = &hpt36x;
- else {
- switch (min_t(u8, rev, 6)) {
- case 3: info = &hpt370; break;
- case 4: info = &hpt370a; break;
- case 5: info = &hpt372; break;
- case 6: info = &hpt372n; break;
- }
- idx++;
- }
- break;
- case 1:
- info = (rev > 1) ? &hpt372n : &hpt372a;
- break;
- case 2:
- info = (rev > 1) ? &hpt302n : &hpt302;
- break;
- case 3:
- hpt371_init(dev);
- info = (rev > 1) ? &hpt371n : &hpt371;
- break;
- case 4:
- info = &hpt374;
- break;
- case 5:
- info = &hpt372n;
- break;
- }
-
- printk(KERN_INFO DRV_NAME ": %s chipset detected\n", info->chip_name);
-
- d = hpt366_chipsets[min_t(u8, idx, 1)];
-
- d.udma_mask = info->udma_mask;
-
- /* fixup ->dma_ops for HPT370/HPT370A */
- if (info == &hpt370 || info == &hpt370a)
- d.dma_ops = &hpt370_dma_ops;
-
- if (info == &hpt36x || info == &hpt374)
- dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
-
- dyn_info = kcalloc(dev2 ? 2 : 1, sizeof(*dyn_info), GFP_KERNEL);
- if (dyn_info == NULL) {
- printk(KERN_ERR "%s %s: out of memory!\n",
- d.name, pci_name(dev));
- pci_dev_put(dev2);
- return -ENOMEM;
- }
-
- /*
- * Copy everything from a static "template" structure
- * to just allocated per-chip hpt_info structure.
- */
- memcpy(dyn_info, info, sizeof(*dyn_info));
-
- if (dev2) {
- memcpy(dyn_info + 1, info, sizeof(*dyn_info));
-
- if (info == &hpt374)
- hpt374_init(dev, dev2);
- else {
- if (hpt36x_init(dev, dev2))
- d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE;
- }
-
- ret = ide_pci_init_two(dev, dev2, &d, dyn_info);
- if (ret < 0) {
- pci_dev_put(dev2);
- kfree(dyn_info);
- }
- return ret;
- }
-
- ret = ide_pci_init_one(dev, &d, dyn_info);
- if (ret < 0)
- kfree(dyn_info);
-
- return ret;
-}
-
-static void hpt366_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct ide_info *info = host->host_priv;
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
- ide_pci_remove(dev);
- pci_dev_put(dev2);
- kfree(info);
-}
-
-static const struct pci_device_id hpt366_pci_tbl[] = {
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), 3 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT374), 4 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), 5 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);
-
-static struct pci_driver hpt366_pci_driver = {
- .name = "HPT366_IDE",
- .id_table = hpt366_pci_tbl,
- .probe = hpt366_init_one,
- .remove = hpt366_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init hpt366_ide_init(void)
-{
- return ide_pci_register_driver(&hpt366_pci_driver);
-}
-
-static void __exit hpt366_ide_exit(void)
-{
- pci_unregister_driver(&hpt366_pci_driver);
-}
-
-module_init(hpt366_ide_init);
-module_exit(hpt366_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
deleted file mode 100644
index 743bc3693ac8..000000000000
--- a/drivers/ide/ht6560b.c
+++ /dev/null
@@ -1,383 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1995-2000 Linus Torvalds & author (see below)
- */
-
-/*
- * HT-6560B EIDE-controller support
- * To activate controller support use kernel parameter "ide0=ht6560b".
- * Use hdparm utility to enable PIO mode support.
- *
- * Author: Mikko Ala-Fossi <maf@....fi>
- * Jan Evert van Grootheest <j.e.van.grootheest@...way.nl>
- *
- */
-
-#define DRV_NAME "ht6560b"
-#define HT6560B_VERSION "v0.08"
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-/* #define DEBUG */ /* remove comments for DEBUG messages */
-
-/*
- * The special i/o-port that HT-6560B uses to configuration:
- * bit0 (0x01): "1" selects secondary interface
- * bit2 (0x04): "1" enables FIFO function
- * bit5 (0x20): "1" enables prefetched data read function (???)
- *
- * The special i/o-port that HT-6560A uses to configuration:
- * bit0 (0x01): "1" selects secondary interface
- * bit1 (0x02): "1" enables prefetched data read function
- * bit2 (0x04): "0" enables multi-master system (?)
- * bit3 (0x08): "1" 3 cycle time, "0" 2 cycle time (?)
- */
-#define HT_CONFIG_PORT 0x3e6
-
-static inline u8 HT_CONFIG(ide_drive_t *drive)
-{
- return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8;
-}
-
-/*
- * FIFO + PREFETCH (both a/b-model)
- */
-#define HT_CONFIG_DEFAULT 0x1c /* no prefetch */
-/* #define HT_CONFIG_DEFAULT 0x3c */ /* with prefetch */
-#define HT_SECONDARY_IF 0x01
-#define HT_PREFETCH_MODE 0x20
-
-/*
- * ht6560b Timing values:
- *
- * I reviewed some assembler source listings of htide drivers and found
- * out how they setup those cycle time interfacing values, as they at Holtek
- * call them. IDESETUP.COM that is supplied with the drivers figures out
- * optimal values and fetches those values to drivers. I found out that
- * they use Select register to fetch timings to the ide board right after
- * interface switching. After that it was quite easy to add code to
- * ht6560b.c.
- *
- * IDESETUP.COM gave me values 0x24, 0x45, 0xaa, 0xff that worked fine
- * for hda and hdc. But hdb needed higher values to work, so I guess
- * that sometimes it is necessary to give higher value than IDESETUP
- * gives. [see cmd640.c for an extreme example of this. -ml]
- *
- * Perhaps I should explain something about these timing values:
- * The higher nibble of value is the Recovery Time (rt) and the lower nibble
- * of the value is the Active Time (at). Minimum value 2 is the fastest and
- * the maximum value 15 is the slowest. Default values should be 15 for both.
- * So 0x24 means 2 for rt and 4 for at. Each of the drives should have
- * both values, and IDESETUP gives automatically rt=15 st=15 for CDROMs or
- * similar. If value is too small there will be all sorts of failures.
- *
- * Timing byte consists of
- * High nibble: Recovery Cycle Time (rt)
- * The valid values range from 2 to 15. The default is 15.
- *
- * Low nibble: Active Cycle Time (at)
- * The valid values range from 2 to 15. The default is 15.
- *
- * You can obtain optimized timing values by running Holtek IDESETUP.COM
- * for DOS. DOS drivers get their timing values from command line, where
- * the first value is the Recovery Time and the second value is the
- * Active Time for each drive. Smaller value gives higher speed.
- * In case of failures you should probably fall back to a higher value.
- */
-static inline u8 HT_TIMING(ide_drive_t *drive)
-{
- return (unsigned long)ide_get_drivedata(drive) & 0x00ff;
-}
-
-#define HT_TIMING_DEFAULT 0xff
-
-/*
- * This routine handles interface switching for the peculiar hardware design
- * on the F.G.I./Holtek HT-6560B VLB IDE interface.
- * The HT-6560B can only enable one IDE port at a time, and requires a
- * silly sequence (below) whenever we switch between primary and secondary.
- */
-
-/*
- * This routine is invoked from ide.c to prepare for access to a given drive.
- */
-static void ht6560b_dev_select(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
- static u8 current_select = 0;
- static u8 current_timing = 0;
- u8 select, timing;
-
- local_irq_save(flags);
-
- select = HT_CONFIG(drive);
- timing = HT_TIMING(drive);
-
- /*
- * Need to enforce prefetch sometimes because otherwise
- * it'll hang (hard).
- */
- if (drive->media != ide_disk ||
- (drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- select |= HT_PREFETCH_MODE;
-
- if (select != current_select || timing != current_timing) {
- current_select = select;
- current_timing = timing;
- (void)inb(HT_CONFIG_PORT);
- (void)inb(HT_CONFIG_PORT);
- (void)inb(HT_CONFIG_PORT);
- (void)inb(HT_CONFIG_PORT);
- outb(select, HT_CONFIG_PORT);
- /*
- * Set timing for this drive:
- */
- outb(timing, hwif->io_ports.device_addr);
- (void)inb(hwif->io_ports.status_addr);
-#ifdef DEBUG
- printk("ht6560b: %s: select=%#x timing=%#x\n",
- drive->name, select, timing);
-#endif
- }
- local_irq_restore(flags);
-
- outb(drive->select | ATA_DEVICE_OBS, hwif->io_ports.device_addr);
-}
-
-/*
- * Autodetection and initialization of ht6560b
- */
-static int __init try_to_init_ht6560b(void)
-{
- u8 orig_value;
- int i;
-
- /* Autodetect ht6560b */
- if ((orig_value = inb(HT_CONFIG_PORT)) == 0xff)
- return 0;
-
- for (i=3;i>0;i--) {
- outb(0x00, HT_CONFIG_PORT);
- if (!( (~inb(HT_CONFIG_PORT)) & 0x3f )) {
- outb(orig_value, HT_CONFIG_PORT);
- return 0;
- }
- }
- outb(0x00, HT_CONFIG_PORT);
- if ((~inb(HT_CONFIG_PORT))& 0x3f) {
- outb(orig_value, HT_CONFIG_PORT);
- return 0;
- }
- /*
- * Ht6560b autodetected
- */
- outb(HT_CONFIG_DEFAULT, HT_CONFIG_PORT);
- outb(HT_TIMING_DEFAULT, 0x1f6); /* Select register */
- (void)inb(0x1f7); /* Status register */
-
- printk("ht6560b " HT6560B_VERSION
- ": chipset detected and initialized"
-#ifdef DEBUG
- " with debug enabled"
-#endif
- "\n"
- );
- return 1;
-}
-
-static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio)
-{
- int active_time, recovery_time;
- int active_cycles, recovery_cycles;
- int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
-
- if (pio) {
- unsigned int cycle_time;
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-
- cycle_time = ide_pio_cycle_time(drive, pio);
-
- /*
- * Just like opti621.c we try to calculate the
- * actual cycle time for recovery and activity
- * according system bus speed.
- */
- active_time = t->active;
- recovery_time = cycle_time - active_time - t->setup;
- /*
- * Cycle times should be Vesa bus cycles
- */
- active_cycles = (active_time * bus_speed + 999) / 1000;
- recovery_cycles = (recovery_time * bus_speed + 999) / 1000;
- /*
- * Upper and lower limits
- */
- if (active_cycles < 2) active_cycles = 2;
- if (recovery_cycles < 2) recovery_cycles = 2;
- if (active_cycles > 15) active_cycles = 15;
- if (recovery_cycles > 15) recovery_cycles = 0; /* 0==16 */
-
-#ifdef DEBUG
- printk("ht6560b: drive %s setting pio=%d recovery=%d (%dns) active=%d (%dns)\n", drive->name, pio, recovery_cycles, recovery_time, active_cycles, active_time);
-#endif
-
- return (u8)((recovery_cycles << 4) | active_cycles);
- } else {
-
-#ifdef DEBUG
- printk("ht6560b: drive %s setting pio=0\n", drive->name);
-#endif
-
- return HT_TIMING_DEFAULT; /* default setting */
- }
-}
-
-static DEFINE_SPINLOCK(ht6560b_lock);
-
-/*
- * Enable/Disable so called prefetch mode
- */
-static void ht_set_prefetch(ide_drive_t *drive, u8 state)
-{
- unsigned long flags, config;
- int t = HT_PREFETCH_MODE << 8;
-
- spin_lock_irqsave(&ht6560b_lock, flags);
-
- config = (unsigned long)ide_get_drivedata(drive);
-
- /*
- * Prefetch mode and unmask irq seems to conflict
- */
- if (state) {
- config |= t; /* enable prefetch mode */
- drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
- drive->dev_flags &= ~IDE_DFLAG_UNMASK;
- } else {
- config &= ~t; /* disable prefetch mode */
- drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
- }
-
- ide_set_drivedata(drive, (void *)config);
-
- spin_unlock_irqrestore(&ht6560b_lock, flags);
-
-#ifdef DEBUG
- printk("ht6560b: drive %s prefetch mode %sabled\n", drive->name, (state ? "en" : "dis"));
-#endif
-}
-
-static void ht6560b_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned long flags, config;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- u8 timing;
-
- switch (pio) {
- case 8: /* set prefetch off */
- case 9: /* set prefetch on */
- ht_set_prefetch(drive, pio & 1);
- return;
- }
-
- timing = ht_pio2timings(drive, pio);
-
- spin_lock_irqsave(&ht6560b_lock, flags);
- config = (unsigned long)ide_get_drivedata(drive);
- config &= 0xff00;
- config |= timing;
- ide_set_drivedata(drive, (void *)config);
- spin_unlock_irqrestore(&ht6560b_lock, flags);
-
-#ifdef DEBUG
- printk("ht6560b: drive %s tuned to pio mode %#x timing=%#x\n", drive->name, pio, timing);
-#endif
-}
-
-static void __init ht6560b_init_dev(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- /* Setting default configurations for drives. */
- unsigned long t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT;
-
- if (hwif->channel)
- t |= (HT_SECONDARY_IF << 8);
-
- ide_set_drivedata(drive, (void *)t);
-}
-
-static bool probe_ht6560b;
-
-module_param_named(probe, probe_ht6560b, bool, 0);
-MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
-
-static const struct ide_tp_ops ht6560b_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ht6560b_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_port_ops ht6560b_port_ops = {
- .init_dev = ht6560b_init_dev,
- .set_pio_mode = ht6560b_set_pio_mode,
-};
-
-static const struct ide_port_info ht6560b_port_info __initconst = {
- .name = DRV_NAME,
- .chipset = ide_ht6560b,
- .tp_ops = &ht6560b_tp_ops,
- .port_ops = &ht6560b_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */
- IDE_HFLAG_NO_DMA |
- IDE_HFLAG_ABUSE_PREFETCH,
- .pio_mask = ATA_PIO4,
-};
-
-static int __init ht6560b_init(void)
-{
- if (probe_ht6560b == 0)
- return -ENODEV;
-
- if (!request_region(HT_CONFIG_PORT, 1, DRV_NAME)) {
- printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n",
- __func__);
- return -ENODEV;
- }
-
- if (!try_to_init_ht6560b()) {
- printk(KERN_NOTICE "%s: HBA not found\n", __func__);
- goto release_region;
- }
-
- return ide_legacy_device_add(&ht6560b_port_info, 0);
-
-release_region:
- release_region(HT_CONFIG_PORT, 1);
- return -ENODEV;
-}
-
-module_init(ht6560b_init);
-
-MODULE_AUTHOR("See Local File");
-MODULE_DESCRIPTION("HT-6560B EIDE-controller support");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
deleted file mode 100644
index 329c7e4bc9d0..000000000000
--- a/drivers/ide/icside.c
+++ /dev/null
@@ -1,692 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 1996-2004 Russell King.
- *
- * Please note that this platform does not support 32-bit IDE IO.
- */
-
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/scatterlist.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-#include <asm/ecard.h>
-
-#define DRV_NAME "icside"
-
-#define ICS_IDENT_OFFSET 0x2280
-
-#define ICS_ARCIN_V5_INTRSTAT 0x0000
-#define ICS_ARCIN_V5_INTROFFSET 0x0004
-#define ICS_ARCIN_V5_IDEOFFSET 0x2800
-#define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80
-#define ICS_ARCIN_V5_IDESTEPPING 6
-
-#define ICS_ARCIN_V6_IDEOFFSET_1 0x2000
-#define ICS_ARCIN_V6_INTROFFSET_1 0x2200
-#define ICS_ARCIN_V6_INTRSTAT_1 0x2290
-#define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380
-#define ICS_ARCIN_V6_IDEOFFSET_2 0x3000
-#define ICS_ARCIN_V6_INTROFFSET_2 0x3200
-#define ICS_ARCIN_V6_INTRSTAT_2 0x3290
-#define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380
-#define ICS_ARCIN_V6_IDESTEPPING 6
-
-struct cardinfo {
- unsigned int dataoffset;
- unsigned int ctrloffset;
- unsigned int stepping;
-};
-
-static struct cardinfo icside_cardinfo_v5 = {
- .dataoffset = ICS_ARCIN_V5_IDEOFFSET,
- .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET,
- .stepping = ICS_ARCIN_V5_IDESTEPPING,
-};
-
-static struct cardinfo icside_cardinfo_v6_1 = {
- .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1,
- .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1,
- .stepping = ICS_ARCIN_V6_IDESTEPPING,
-};
-
-static struct cardinfo icside_cardinfo_v6_2 = {
- .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2,
- .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2,
- .stepping = ICS_ARCIN_V6_IDESTEPPING,
-};
-
-struct icside_state {
- unsigned int channel;
- unsigned int enabled;
- void __iomem *irq_port;
- void __iomem *ioc_base;
- unsigned int sel;
- unsigned int type;
- struct ide_host *host;
-};
-
-#define ICS_TYPE_A3IN 0
-#define ICS_TYPE_A3USER 1
-#define ICS_TYPE_V6 3
-#define ICS_TYPE_V5 15
-#define ICS_TYPE_NOTYPE ((unsigned int)-1)
-
-/* ---------------- Version 5 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose : enable interrupts from card
- */
-static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
-
- writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
-
- readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v5 = {
- .irqenable = icside_irqenable_arcin_v5,
- .irqdisable = icside_irqdisable_arcin_v5,
-};
-
-
-/* ---------------- Version 6 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose : enable interrupts from card
- */
-static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
- void __iomem *base = state->irq_port;
-
- state->enabled = 1;
-
- switch (state->channel) {
- case 0:
- writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
- readb(base + ICS_ARCIN_V6_INTROFFSET_2);
- break;
- case 1:
- writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
- readb(base + ICS_ARCIN_V6_INTROFFSET_1);
- break;
- }
-}
-
-/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
- struct icside_state *state = ec->irq_data;
-
- state->enabled = 0;
-
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-}
-
-/* Prototype: icside_irqprobe(struct expansion_card *ec)
- * Purpose : detect an active interrupt from card
- */
-static int icside_irqpending_arcin_v6(struct expansion_card *ec)
-{
- struct icside_state *state = ec->irq_data;
-
- return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
- readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v6 = {
- .irqenable = icside_irqenable_arcin_v6,
- .irqdisable = icside_irqdisable_arcin_v6,
- .irqpending = icside_irqpending_arcin_v6,
-};
-
-/*
- * Handle routing of interrupts. This is called before
- * we write the command to the drive.
- */
-static void icside_maskproc(ide_drive_t *drive, int mask)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
- struct icside_state *state = ecard_get_drvdata(ec);
- unsigned long flags;
-
- local_irq_save(flags);
-
- state->channel = hwif->channel;
-
- if (state->enabled && !mask) {
- switch (hwif->channel) {
- case 0:
- writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
- break;
- case 1:
- writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- break;
- }
- } else {
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
- readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
- }
-
- local_irq_restore(flags);
-}
-
-static const struct ide_port_ops icside_v6_no_dma_port_ops = {
- .maskproc = icside_maskproc,
-};
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
-/*
- * SG-DMA support.
- *
- * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
- * There is only one DMA controller per card, which means that only
- * one drive can be accessed at one time. NOTE! We do not enforce that
- * here, but we rely on the main IDE driver spotting that both
- * interfaces use the same IRQ, which should guarantee this.
- */
-
-/*
- * Configure the IOMD to give the appropriate timings for the transfer
- * mode being requested. We take the advice of the ATA standards, and
- * calculate the cycle time based on the transfer mode, and the EIDE
- * MW DMA specs that the drive provides in the IDENTIFY command.
- *
- * We have the following IOMD DMA modes to choose from:
- *
- * Type Active Recovery Cycle
- * A 250 (250) 312 (550) 562 (800)
- * B 187 250 437
- * C 125 (125) 125 (375) 250 (500)
- * D 62 125 187
- *
- * (figures in brackets are actual measured timings)
- *
- * However, we also need to take care of the read/write active and
- * recovery timings:
- *
- * Read Write
- * Mode Active -- Recovery -- Cycle IOMD type
- * MW0 215 50 215 480 A
- * MW1 80 50 50 150 C
- * MW2 70 25 25 120 C
- */
-static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned long cycle_time = 0;
- int use_dma_info = 0;
- const u8 xfer_mode = drive->dma_mode;
-
- switch (xfer_mode) {
- case XFER_MW_DMA_2:
- cycle_time = 250;
- use_dma_info = 1;
- break;
-
- case XFER_MW_DMA_1:
- cycle_time = 250;
- use_dma_info = 1;
- break;
-
- case XFER_MW_DMA_0:
- cycle_time = 480;
- break;
-
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- cycle_time = 480;
- break;
- }
-
- /*
- * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
- * take care to note the values in the ID...
- */
- if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
- cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];
-
- ide_set_drivedata(drive, (void *)cycle_time);
-
- printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n",
- drive->name, ide_xfer_verbose(xfer_mode),
- 2000 / (cycle_time ? cycle_time : (unsigned long) -1));
-}
-
-static const struct ide_port_ops icside_v6_port_ops = {
- .set_dma_mode = icside_set_dma_mode,
- .maskproc = icside_maskproc,
-};
-
-static void icside_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static int icside_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
-
- disable_dma(ec->dma);
-
- return get_dma_residue(ec->dma) != 0;
-}
-
-static void icside_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
-
- /* We can not enable DMA on both channels simultaneously. */
- BUG_ON(dma_channel_active(ec->dma));
- enable_dma(ec->dma);
-}
-
-static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
- struct icside_state *state = ecard_get_drvdata(ec);
- unsigned int dma_mode;
-
- if (cmd->tf_flags & IDE_TFLAG_WRITE)
- dma_mode = DMA_MODE_WRITE;
- else
- dma_mode = DMA_MODE_READ;
-
- /*
- * We can not enable DMA on both channels.
- */
- BUG_ON(dma_channel_active(ec->dma));
-
- /*
- * Ensure that we have the right interrupt routed.
- */
- icside_maskproc(drive, 0);
-
- /*
- * Route the DMA signals to the correct interface.
- */
- writeb(state->sel | hwif->channel, state->ioc_base);
-
- /*
- * Select the correct timing for this drive.
- */
- set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive));
-
- /*
- * Tell the DMA engine about the SG table and
- * data direction.
- */
- set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents);
- set_dma_mode(ec->dma, dma_mode);
-
- return 0;
-}
-
-static int icside_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct expansion_card *ec = ECARD_DEV(hwif->dev);
- struct icside_state *state = ecard_get_drvdata(ec);
-
- return readb(state->irq_port +
- (hwif->channel ?
- ICS_ARCIN_V6_INTRSTAT_2 :
- ICS_ARCIN_V6_INTRSTAT_1)) & 1;
-}
-
-static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- hwif->dmatable_cpu = NULL;
- hwif->dmatable_dma = 0;
-
- return 0;
-}
-
-static const struct ide_dma_ops icside_v6_dma_ops = {
- .dma_host_set = icside_dma_host_set,
- .dma_setup = icside_dma_setup,
- .dma_start = icside_dma_start,
- .dma_end = icside_dma_end,
- .dma_test_irq = icside_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
-};
-#endif
-
-static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- return -EOPNOTSUPP;
-}
-
-static void icside_setup_ports(struct ide_hw *hw, void __iomem *base,
- struct cardinfo *info, struct expansion_card *ec)
-{
- unsigned long port = (unsigned long)base + info->dataoffset;
-
- hw->io_ports.data_addr = port;
- hw->io_ports.error_addr = port + (1 << info->stepping);
- hw->io_ports.nsect_addr = port + (2 << info->stepping);
- hw->io_ports.lbal_addr = port + (3 << info->stepping);
- hw->io_ports.lbam_addr = port + (4 << info->stepping);
- hw->io_ports.lbah_addr = port + (5 << info->stepping);
- hw->io_ports.device_addr = port + (6 << info->stepping);
- hw->io_ports.status_addr = port + (7 << info->stepping);
- hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset;
-
- hw->irq = ec->irq;
- hw->dev = &ec->dev;
-}
-
-static const struct ide_port_info icside_v5_port_info = {
- .host_flags = IDE_HFLAG_NO_DMA,
- .chipset = ide_acorn,
-};
-
-static int icside_register_v5(struct icside_state *state,
- struct expansion_card *ec)
-{
- void __iomem *base;
- struct ide_host *host;
- struct ide_hw hw, *hws[] = { &hw };
- int ret;
-
- base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
- if (!base)
- return -ENOMEM;
-
- state->irq_port = base;
-
- ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
- ec->irqmask = 1;
-
- ecard_setirq(ec, &icside_ops_arcin_v5, state);
-
- /*
- * Be on the safe side - disable interrupts
- */
- icside_irqdisable_arcin_v5(ec, 0);
-
- icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
-
- host = ide_host_alloc(&icside_v5_port_info, hws, 1);
- if (host == NULL)
- return -ENODEV;
-
- state->host = host;
-
- ecard_set_drvdata(ec, state);
-
- ret = ide_host_register(host, &icside_v5_port_info, hws);
- if (ret)
- goto err_free;
-
- return 0;
-err_free:
- ide_host_free(host);
- ecard_set_drvdata(ec, NULL);
- return ret;
-}
-
-static const struct ide_port_info icside_v6_port_info = {
- .init_dma = icside_dma_off_init,
- .port_ops = &icside_v6_no_dma_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
- .mwdma_mask = ATA_MWDMA2,
- .swdma_mask = ATA_SWDMA2,
- .chipset = ide_acorn,
-};
-
-static int icside_register_v6(struct icside_state *state,
- struct expansion_card *ec)
-{
- void __iomem *ioc_base, *easi_base;
- struct ide_host *host;
- unsigned int sel = 0;
- int ret;
- struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] };
- struct ide_port_info d = icside_v6_port_info;
-
- ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
- if (!ioc_base) {
- ret = -ENOMEM;
- goto out;
- }
-
- easi_base = ioc_base;
-
- if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
- easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
- if (!easi_base) {
- ret = -ENOMEM;
- goto out;
- }
-
- /*
- * Enable access to the EASI region.
- */
- sel = 1 << 5;
- }
-
- writeb(sel, ioc_base);
-
- ecard_setirq(ec, &icside_ops_arcin_v6, state);
-
- state->irq_port = easi_base;
- state->ioc_base = ioc_base;
- state->sel = sel;
-
- /*
- * Be on the safe side - disable interrupts
- */
- icside_irqdisable_arcin_v6(ec, 0);
-
- icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
- icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
-
- host = ide_host_alloc(&d, hws, 2);
- if (host == NULL)
- return -ENODEV;
-
- state->host = host;
-
- ecard_set_drvdata(ec, state);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
- if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
- d.init_dma = icside_dma_init;
- d.port_ops = &icside_v6_port_ops;
- d.dma_ops = &icside_v6_dma_ops;
- }
-#endif
-
- ret = ide_host_register(host, &d, hws);
- if (ret)
- goto err_free;
-
- return 0;
-err_free:
- ide_host_free(host);
- if (d.dma_ops)
- free_dma(ec->dma);
- ecard_set_drvdata(ec, NULL);
-out:
- return ret;
-}
-
-static int icside_probe(struct expansion_card *ec, const struct ecard_id *id)
-{
- struct icside_state *state;
- void __iomem *idmem;
- int ret;
-
- ret = ecard_request_resources(ec);
- if (ret)
- goto out;
-
- state = kzalloc(sizeof(struct icside_state), GFP_KERNEL);
- if (!state) {
- ret = -ENOMEM;
- goto release;
- }
-
- state->type = ICS_TYPE_NOTYPE;
-
- idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
- if (idmem) {
- unsigned int type;
-
- type = readb(idmem + ICS_IDENT_OFFSET) & 1;
- type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
- type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
- type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
- ecardm_iounmap(ec, idmem);
-
- state->type = type;
- }
-
- switch (state->type) {
- case ICS_TYPE_A3IN:
- dev_warn(&ec->dev, "A3IN unsupported\n");
- ret = -ENODEV;
- break;
-
- case ICS_TYPE_A3USER:
- dev_warn(&ec->dev, "A3USER unsupported\n");
- ret = -ENODEV;
- break;
-
- case ICS_TYPE_V5:
- ret = icside_register_v5(state, ec);
- break;
-
- case ICS_TYPE_V6:
- ret = icside_register_v6(state, ec);
- break;
-
- default:
- dev_warn(&ec->dev, "unknown interface type\n");
- ret = -ENODEV;
- break;
- }
-
- if (ret == 0)
- goto out;
-
- kfree(state);
- release:
- ecard_release_resources(ec);
- out:
- return ret;
-}
-
-static void icside_remove(struct expansion_card *ec)
-{
- struct icside_state *state = ecard_get_drvdata(ec);
-
- switch (state->type) {
- case ICS_TYPE_V5:
- /* FIXME: tell IDE to stop using the interface */
-
- /* Disable interrupts */
- icside_irqdisable_arcin_v5(ec, 0);
- break;
-
- case ICS_TYPE_V6:
- /* FIXME: tell IDE to stop using the interface */
- if (ec->dma != NO_DMA)
- free_dma(ec->dma);
-
- /* Disable interrupts */
- icside_irqdisable_arcin_v6(ec, 0);
-
- /* Reset the ROM pointer/EASI selection */
- writeb(0, state->ioc_base);
- break;
- }
-
- ecard_set_drvdata(ec, NULL);
-
- kfree(state);
- ecard_release_resources(ec);
-}
-
-static void icside_shutdown(struct expansion_card *ec)
-{
- struct icside_state *state = ecard_get_drvdata(ec);
- unsigned long flags;
-
- /*
- * Disable interrupts from this card. We need to do
- * this before disabling EASI since we may be accessing
- * this register via that region.
- */
- local_irq_save(flags);
- ec->ops->irqdisable(ec, 0);
- local_irq_restore(flags);
-
- /*
- * Reset the ROM pointer so that we can read the ROM
- * after a soft reboot. This also disables access to
- * the IDE taskfile via the EASI region.
- */
- if (state->ioc_base)
- writeb(0, state->ioc_base);
-}
-
-static const struct ecard_id icside_ids[] = {
- { MANU_ICS, PROD_ICS_IDE },
- { MANU_ICS2, PROD_ICS2_IDE },
- { 0xffff, 0xffff }
-};
-
-static struct ecard_driver icside_driver = {
- .probe = icside_probe,
- .remove = icside_remove,
- .shutdown = icside_shutdown,
- .id_table = icside_ids,
- .drv = {
- .name = "icside",
- },
-};
-
-static int __init icside_init(void)
-{
- return ecard_register_driver(&icside_driver);
-}
-
-static void __exit icside_exit(void)
-{
- ecard_remove_driver(&icside_driver);
-}
-
-MODULE_AUTHOR("Russell King <rmk@....linux.org.uk>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("ICS IDE driver");
-
-module_init(icside_init);
-module_exit(icside_exit);
diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c
deleted file mode 100644
index 06c6215e0cbe..000000000000
--- a/drivers/ide/ide-4drives.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "ide-4drives"
-
-static bool probe_4drives;
-
-module_param_named(probe, probe_4drives, bool, 0);
-MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
-
-static void ide_4drives_init_dev(ide_drive_t *drive)
-{
- if (drive->hwif->channel)
- drive->select ^= 0x20;
-}
-
-static const struct ide_port_ops ide_4drives_port_ops = {
- .init_dev = ide_4drives_init_dev,
-};
-
-static const struct ide_port_info ide_4drives_port_info = {
- .port_ops = &ide_4drives_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA |
- IDE_HFLAG_4DRIVES,
- .chipset = ide_4drives,
-};
-
-static int __init ide_4drives_init(void)
-{
- unsigned long base = 0x1f0, ctl = 0x3f6;
- struct ide_hw hw, *hws[] = { &hw, &hw };
-
- if (probe_4drives == 0)
- return -ENODEV;
-
- if (!request_region(base, 8, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- DRV_NAME, base, base + 7);
- return -EBUSY;
- }
-
- if (!request_region(ctl, 1, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- DRV_NAME, ctl);
- release_region(base, 8);
- return -EBUSY;
- }
-
- memset(&hw, 0, sizeof(hw));
-
- ide_std_init_ports(&hw, base, ctl);
- hw.irq = 14;
-
- return ide_host_add(&ide_4drives_port_info, hws, 2, NULL);
-}
-
-module_init(ide_4drives_init);
-
-MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("generic IDE chipset with 4 drives/port support");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
deleted file mode 100644
index 05e18d658141..000000000000
--- a/drivers/ide/ide-acpi.c
+++ /dev/null
@@ -1,622 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Provides ACPI support for IDE drives.
- *
- * Copyright (C) 2005 Intel Corp.
- * Copyright (C) 2005 Randy Dunlap
- * Copyright (C) 2006 SUSE Linux Products GmbH
- * Copyright (C) 2006 Hannes Reinecke
- */
-
-#include <linux/acpi.h>
-#include <linux/ata.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/ide.h>
-#include <linux/pci.h>
-#include <linux/dmi.h>
-#include <linux/module.h>
-
-#define REGS_PER_GTF 7
-
-struct GTM_buffer {
- u32 PIO_speed0;
- u32 DMA_speed0;
- u32 PIO_speed1;
- u32 DMA_speed1;
- u32 GTM_flags;
-};
-
-struct ide_acpi_drive_link {
- acpi_handle obj_handle;
- u8 idbuff[512];
-};
-
-struct ide_acpi_hwif_link {
- ide_hwif_t *hwif;
- acpi_handle obj_handle;
- struct GTM_buffer gtm;
- struct ide_acpi_drive_link master;
- struct ide_acpi_drive_link slave;
-};
-
-#undef DEBUGGING
-/* note: adds function name and KERN_DEBUG */
-#ifdef DEBUGGING
-#define DEBPRINT(fmt, args...) \
- printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
-#else
-#define DEBPRINT(fmt, args...) do {} while (0)
-#endif /* DEBUGGING */
-
-static bool ide_noacpi;
-module_param_named(noacpi, ide_noacpi, bool, 0);
-MODULE_PARM_DESC(noacpi, "disable IDE ACPI support");
-
-static bool ide_acpigtf;
-module_param_named(acpigtf, ide_acpigtf, bool, 0);
-MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support");
-
-static bool ide_acpionboot;
-module_param_named(acpionboot, ide_acpionboot, bool, 0);
-MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot");
-
-static bool ide_noacpi_psx;
-static int no_acpi_psx(const struct dmi_system_id *id)
-{
- ide_noacpi_psx = true;
- printk(KERN_NOTICE"%s detected - disable ACPI _PSx.\n", id->ident);
- return 0;
-}
-
-static const struct dmi_system_id ide_acpi_dmi_table[] = {
- /* Bug 9673. */
- /* We should check if this is because ACPI NVS isn't save/restored. */
- {
- .callback = no_acpi_psx,
- .ident = "HP nx9005",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies Ltd."),
- DMI_MATCH(DMI_BIOS_VERSION, "KAM1.60")
- },
- },
-
- { } /* terminate list */
-};
-
-int ide_acpi_init(void)
-{
- dmi_check_system(ide_acpi_dmi_table);
- return 0;
-}
-
-bool ide_port_acpi(ide_hwif_t *hwif)
-{
- return ide_noacpi == 0 && hwif->acpidata;
-}
-
-static acpi_handle acpi_get_child(acpi_handle handle, u64 addr)
-{
- struct acpi_device *adev;
-
- if (!handle || acpi_bus_get_device(handle, &adev))
- return NULL;
-
- adev = acpi_find_child_device(adev, addr, false);
- return adev ? adev->handle : NULL;
-}
-
-/**
- * ide_get_dev_handle - finds acpi_handle and PCI device.function
- * @dev: device to locate
- * @handle: returned acpi_handle for @dev
- * @pcidevfn: return PCI device.func for @dev
- *
- * Returns the ACPI object handle to the corresponding PCI device.
- *
- * Returns 0 on success, <0 on error.
- */
-static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
- u64 *pcidevfn)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- unsigned int bus, devnum, func;
- u64 addr;
- acpi_handle dev_handle;
- acpi_status status;
- struct acpi_device_info *dinfo = NULL;
- int ret = -ENODEV;
-
- bus = pdev->bus->number;
- devnum = PCI_SLOT(pdev->devfn);
- func = PCI_FUNC(pdev->devfn);
- /* ACPI _ADR encoding for PCI bus: */
- addr = (u64)(devnum << 16 | func);
-
- DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func);
-
- dev_handle = ACPI_HANDLE(dev);
- if (!dev_handle) {
- DEBPRINT("no acpi handle for device\n");
- goto err;
- }
-
- status = acpi_get_object_info(dev_handle, &dinfo);
- if (ACPI_FAILURE(status)) {
- DEBPRINT("get_object_info for device failed\n");
- goto err;
- }
- if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
- dinfo->address == addr) {
- *pcidevfn = addr;
- *handle = dev_handle;
- } else {
- DEBPRINT("get_object_info for device has wrong "
- " address: %llu, should be %u\n",
- dinfo ? (unsigned long long)dinfo->address : -1ULL,
- (unsigned int)addr);
- goto err;
- }
-
- DEBPRINT("for dev=0x%x.%x, addr=0x%llx, *handle=0x%p\n",
- devnum, func, (unsigned long long)addr, *handle);
- ret = 0;
-err:
- kfree(dinfo);
- return ret;
-}
-
-/**
- * ide_acpi_hwif_get_handle - Get ACPI object handle for a given hwif
- * @hwif: device to locate
- *
- * Retrieves the object handle for a given hwif.
- *
- * Returns handle on success, 0 on error.
- */
-static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif)
-{
- struct device *dev = hwif->gendev.parent;
- acpi_handle dev_handle;
- u64 pcidevfn;
- acpi_handle chan_handle;
- int err;
-
- DEBPRINT("ENTER: device %s\n", hwif->name);
-
- if (!dev) {
- DEBPRINT("no PCI device for %s\n", hwif->name);
- return NULL;
- }
-
- err = ide_get_dev_handle(dev, &dev_handle, &pcidevfn);
- if (err < 0) {
- DEBPRINT("ide_get_dev_handle failed (%d)\n", err);
- return NULL;
- }
-
- /* get child objects of dev_handle == channel objects,
- * + _their_ children == drive objects */
- /* channel is hwif->channel */
- chan_handle = acpi_get_child(dev_handle, hwif->channel);
- DEBPRINT("chan adr=%d: handle=0x%p\n",
- hwif->channel, chan_handle);
-
- return chan_handle;
-}
-
-/**
- * do_drive_get_GTF - get the drive bootup default taskfile settings
- * @drive: the drive for which the taskfile settings should be retrieved
- * @gtf_length: number of bytes of _GTF data returned at @gtf_address
- * @gtf_address: buffer containing _GTF taskfile arrays
- *
- * The _GTF method has no input parameters.
- * It returns a variable number of register set values (registers
- * hex 1F1..1F7, taskfiles).
- * The <variable number> is not known in advance, so have ACPI-CA
- * allocate the buffer as needed and return it, then free it later.
- *
- * The returned @gtf_length and @gtf_address are only valid if the
- * function return value is 0.
- */
-static int do_drive_get_GTF(ide_drive_t *drive,
- unsigned int *gtf_length, unsigned long *gtf_address,
- unsigned long *obj_loc)
-{
- acpi_status status;
- struct acpi_buffer output;
- union acpi_object *out_obj;
- int err = -ENODEV;
-
- *gtf_length = 0;
- *gtf_address = 0UL;
- *obj_loc = 0UL;
-
- if (!drive->acpidata->obj_handle) {
- DEBPRINT("No ACPI object found for %s\n", drive->name);
- goto out;
- }
-
- /* Setting up output buffer */
- output.length = ACPI_ALLOCATE_BUFFER;
- output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
-
- /* _GTF has no input parameters */
- err = -EIO;
- status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF",
- NULL, &output);
- if (ACPI_FAILURE(status)) {
- printk(KERN_DEBUG
- "%s: Run _GTF error: status = 0x%x\n",
- __func__, status);
- goto out;
- }
-
- if (!output.length || !output.pointer) {
- DEBPRINT("Run _GTF: "
- "length or ptr is NULL (0x%llx, 0x%p)\n",
- (unsigned long long)output.length,
- output.pointer);
- goto out;
- }
-
- out_obj = output.pointer;
- if (out_obj->type != ACPI_TYPE_BUFFER) {
- DEBPRINT("Run _GTF: error: "
- "expected object type of ACPI_TYPE_BUFFER, "
- "got 0x%x\n", out_obj->type);
- err = -ENOENT;
- kfree(output.pointer);
- goto out;
- }
-
- if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
- out_obj->buffer.length % REGS_PER_GTF) {
- printk(KERN_ERR
- "%s: unexpected GTF length (%d) or addr (0x%p)\n",
- __func__, out_obj->buffer.length,
- out_obj->buffer.pointer);
- err = -ENOENT;
- kfree(output.pointer);
- goto out;
- }
-
- *gtf_length = out_obj->buffer.length;
- *gtf_address = (unsigned long)out_obj->buffer.pointer;
- *obj_loc = (unsigned long)out_obj;
- DEBPRINT("returning gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
- *gtf_length, *gtf_address, *obj_loc);
- err = 0;
-out:
- return err;
-}
-
-/**
- * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
- * @drive: the drive to which the taskfile command should be sent
- * @gtf_length: total number of bytes of _GTF taskfiles
- * @gtf_address: location of _GTF taskfile arrays
- *
- * Write {gtf_address, length gtf_length} in groups of
- * REGS_PER_GTF bytes.
- */
-static int do_drive_set_taskfiles(ide_drive_t *drive,
- unsigned int gtf_length,
- unsigned long gtf_address)
-{
- int rc = 0, err;
- int gtf_count = gtf_length / REGS_PER_GTF;
- int ix;
-
- DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n",
- gtf_length, gtf_length, gtf_count, gtf_address);
-
- /* send all taskfile registers (0x1f1-0x1f7) *in*that*order* */
- for (ix = 0; ix < gtf_count; ix++) {
- u8 *gtf = (u8 *)(gtf_address + ix * REGS_PER_GTF);
- struct ide_cmd cmd;
-
- DEBPRINT("(0x1f1-1f7): "
- "hex: %02x %02x %02x %02x %02x %02x %02x\n",
- gtf[0], gtf[1], gtf[2],
- gtf[3], gtf[4], gtf[5], gtf[6]);
-
- if (!ide_acpigtf) {
- DEBPRINT("_GTF execution disabled\n");
- continue;
- }
-
- /* convert GTF to taskfile */
- memset(&cmd, 0, sizeof(cmd));
- memcpy(&cmd.tf.feature, gtf, REGS_PER_GTF);
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
-
- err = ide_no_data_taskfile(drive, &cmd);
- if (err) {
- printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n",
- __func__, err);
- rc = err;
- }
- }
-
- return rc;
-}
-
-/**
- * ide_acpi_exec_tfs - get then write drive taskfile settings
- * @drive: the drive for which the taskfile settings should be
- * written.
- *
- * According to the ACPI spec this should be called after _STM
- * has been evaluated for the interface. Some ACPI vendors interpret
- * that as a hard requirement and modify the taskfile according
- * to the Identify Drive information passed down with _STM.
- * So one should really make sure to call this only after _STM has
- * been executed.
- */
-int ide_acpi_exec_tfs(ide_drive_t *drive)
-{
- int ret;
- unsigned int gtf_length;
- unsigned long gtf_address;
- unsigned long obj_loc;
-
- DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
-
- ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc);
- if (ret < 0) {
- DEBPRINT("get_GTF error (%d)\n", ret);
- return ret;
- }
-
- DEBPRINT("call set_taskfiles, drive=%s\n", drive->name);
-
- ret = do_drive_set_taskfiles(drive, gtf_length, gtf_address);
- kfree((void *)obj_loc);
- if (ret < 0) {
- DEBPRINT("set_taskfiles error (%d)\n", ret);
- }
-
- DEBPRINT("ret=%d\n", ret);
-
- return ret;
-}
-
-/**
- * ide_acpi_get_timing - get the channel (controller) timings
- * @hwif: target IDE interface (channel)
- *
- * This function executes the _GTM ACPI method for the target channel.
- *
- */
-void ide_acpi_get_timing(ide_hwif_t *hwif)
-{
- acpi_status status;
- struct acpi_buffer output;
- union acpi_object *out_obj;
-
- /* Setting up output buffer for _GTM */
- output.length = ACPI_ALLOCATE_BUFFER;
- output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
-
- /* _GTM has no input parameters */
- status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_GTM",
- NULL, &output);
-
- DEBPRINT("_GTM status: %d, outptr: 0x%p, outlen: 0x%llx\n",
- status, output.pointer,
- (unsigned long long)output.length);
-
- if (ACPI_FAILURE(status)) {
- DEBPRINT("Run _GTM error: status = 0x%x\n", status);
- return;
- }
-
- if (!output.length || !output.pointer) {
- DEBPRINT("Run _GTM: length or ptr is NULL (0x%llx, 0x%p)\n",
- (unsigned long long)output.length,
- output.pointer);
- kfree(output.pointer);
- return;
- }
-
- out_obj = output.pointer;
- if (out_obj->type != ACPI_TYPE_BUFFER) {
- DEBPRINT("Run _GTM: error: "
- "expected object type of ACPI_TYPE_BUFFER, "
- "got 0x%x\n", out_obj->type);
- kfree(output.pointer);
- return;
- }
-
- if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
- out_obj->buffer.length != sizeof(struct GTM_buffer)) {
- printk(KERN_ERR
- "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or "
- "addr (0x%p)\n",
- __func__, out_obj->buffer.length,
- sizeof(struct GTM_buffer), out_obj->buffer.pointer);
- kfree(output.pointer);
- return;
- }
-
- memcpy(&hwif->acpidata->gtm, out_obj->buffer.pointer,
- sizeof(struct GTM_buffer));
-
- DEBPRINT("_GTM info: ptr: 0x%p, len: 0x%x, exp.len: 0x%zx\n",
- out_obj->buffer.pointer, out_obj->buffer.length,
- sizeof(struct GTM_buffer));
-
- DEBPRINT("_GTM fields: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
- hwif->acpidata->gtm.PIO_speed0,
- hwif->acpidata->gtm.DMA_speed0,
- hwif->acpidata->gtm.PIO_speed1,
- hwif->acpidata->gtm.DMA_speed1,
- hwif->acpidata->gtm.GTM_flags);
-
- kfree(output.pointer);
-}
-
-/**
- * ide_acpi_push_timing - set the channel (controller) timings
- * @hwif: target IDE interface (channel)
- *
- * This function executes the _STM ACPI method for the target channel.
- *
- * _STM requires Identify Drive data, which has to passed as an argument.
- * Unfortunately drive->id is a mangled version which we can't readily
- * use; hence we'll get the information afresh.
- */
-void ide_acpi_push_timing(ide_hwif_t *hwif)
-{
- acpi_status status;
- struct acpi_object_list input;
- union acpi_object in_params[3];
- struct ide_acpi_drive_link *master = &hwif->acpidata->master;
- struct ide_acpi_drive_link *slave = &hwif->acpidata->slave;
-
- /* Give the GTM buffer + drive Identify data to the channel via the
- * _STM method: */
- /* setup input parameters buffer for _STM */
- input.count = 3;
- input.pointer = in_params;
- in_params[0].type = ACPI_TYPE_BUFFER;
- in_params[0].buffer.length = sizeof(struct GTM_buffer);
- in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
- in_params[1].type = ACPI_TYPE_BUFFER;
- in_params[1].buffer.length = ATA_ID_WORDS * 2;
- in_params[1].buffer.pointer = (u8 *)&master->idbuff;
- in_params[2].type = ACPI_TYPE_BUFFER;
- in_params[2].buffer.length = ATA_ID_WORDS * 2;
- in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
- /* Output buffer: _STM has no output */
-
- status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_STM",
- &input, NULL);
-
- if (ACPI_FAILURE(status)) {
- DEBPRINT("Run _STM error: status = 0x%x\n", status);
- }
- DEBPRINT("_STM status: %d\n", status);
-}
-
-/**
- * ide_acpi_set_state - set the channel power state
- * @hwif: target IDE interface
- * @on: state, on/off
- *
- * This function executes the _PS0/_PS3 ACPI method to set the power state.
- * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
- */
-void ide_acpi_set_state(ide_hwif_t *hwif, int on)
-{
- ide_drive_t *drive;
- int i;
-
- if (ide_noacpi_psx)
- return;
-
- DEBPRINT("ENTER:\n");
-
- /* channel first and then drives for power on and verse versa for power off */
- if (on)
- acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
-
- ide_port_for_each_present_dev(i, drive, hwif) {
- if (drive->acpidata->obj_handle)
- acpi_bus_set_power(drive->acpidata->obj_handle,
- on ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
- }
-
- if (!on)
- acpi_bus_set_power(hwif->acpidata->obj_handle,
- ACPI_STATE_D3_COLD);
-}
-
-/**
- * ide_acpi_init_port - initialize the ACPI link for an IDE interface
- * @hwif: target IDE interface (channel)
- *
- * The ACPI spec is not quite clear when the drive identify buffer
- * should be obtained. Calling IDENTIFY DEVICE during shutdown
- * is not the best of ideas as the drive might already being put to
- * sleep. And obviously we can't call it during resume.
- * So we get the information during startup; but this means that
- * any changes during run-time will be lost after resume.
- */
-void ide_acpi_init_port(ide_hwif_t *hwif)
-{
- hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
- if (!hwif->acpidata)
- return;
-
- hwif->acpidata->obj_handle = ide_acpi_hwif_get_handle(hwif);
- if (!hwif->acpidata->obj_handle) {
- DEBPRINT("no ACPI object for %s found\n", hwif->name);
- kfree(hwif->acpidata);
- hwif->acpidata = NULL;
- }
-}
-
-void ide_acpi_port_init_devices(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- int i, err;
-
- if (hwif->acpidata == NULL)
- return;
-
- /*
- * The ACPI spec mandates that we send information
- * for both drives, regardless whether they are connected
- * or not.
- */
- hwif->devices[0]->acpidata = &hwif->acpidata->master;
- hwif->devices[1]->acpidata = &hwif->acpidata->slave;
-
- /* get _ADR info for each device */
- ide_port_for_each_present_dev(i, drive, hwif) {
- acpi_handle dev_handle;
-
- DEBPRINT("ENTER: %s at channel#: %d port#: %d\n",
- drive->name, hwif->channel, drive->dn & 1);
-
- /* TBD: could also check ACPI object VALID bits */
- dev_handle = acpi_get_child(hwif->acpidata->obj_handle,
- drive->dn & 1);
-
- DEBPRINT("drive %s handle 0x%p\n", drive->name, dev_handle);
-
- drive->acpidata->obj_handle = dev_handle;
- }
-
- /* send IDENTIFY for each device */
- ide_port_for_each_present_dev(i, drive, hwif) {
- err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
- if (err)
- DEBPRINT("identify device %s failed (%d)\n",
- drive->name, err);
- }
-
- if (ide_noacpi || ide_acpionboot == 0) {
- DEBPRINT("ACPI methods disabled on boot\n");
- return;
- }
-
- /* ACPI _PS0 before _STM */
- ide_acpi_set_state(hwif, 1);
- /*
- * ACPI requires us to call _STM on startup
- */
- ide_acpi_get_timing(hwif);
- ide_acpi_push_timing(hwif);
-
- ide_port_for_each_present_dev(i, drive, hwif) {
- ide_acpi_exec_tfs(drive);
- }
-}
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
deleted file mode 100644
index a1ce9f5ac3aa..000000000000
--- a/drivers/ide/ide-atapi.c
+++ /dev/null
@@ -1,756 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ATAPI support.
- */
-
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/ide.h>
-#include <linux/scatterlist.h>
-#include <linux/gfp.h>
-
-#include <scsi/scsi.h>
-
-#define DRV_NAME "ide-atapi"
-#define PFX DRV_NAME ": "
-
-#ifdef DEBUG
-#define debug_log(fmt, args...) \
- printk(KERN_INFO "ide: " fmt, ## args)
-#else
-#define debug_log(fmt, args...) do {} while (0)
-#endif
-
-#define ATAPI_MIN_CDB_BYTES 12
-
-static inline int dev_is_idecd(ide_drive_t *drive)
-{
- return drive->media == ide_cdrom || drive->media == ide_optical;
-}
-
-/*
- * Check whether we can support a device,
- * based on the ATAPI IDENTIFY command results.
- */
-int ide_check_atapi_device(ide_drive_t *drive, const char *s)
-{
- u16 *id = drive->id;
- u8 gcw[2], protocol, device_type, removable, drq_type, packet_size;
-
- *((u16 *)&gcw) = id[ATA_ID_CONFIG];
-
- protocol = (gcw[1] & 0xC0) >> 6;
- device_type = gcw[1] & 0x1F;
- removable = (gcw[0] & 0x80) >> 7;
- drq_type = (gcw[0] & 0x60) >> 5;
- packet_size = gcw[0] & 0x03;
-
-#ifdef CONFIG_PPC
- /* kludge for Apple PowerBook internal zip */
- if (drive->media == ide_floppy && device_type == 5 &&
- !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
- strstr((char *)&id[ATA_ID_PROD], "ZIP"))
- device_type = 0;
-#endif
-
- if (protocol != 2)
- printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n",
- s, drive->name, protocol);
- else if ((drive->media == ide_floppy && device_type != 0) ||
- (drive->media == ide_tape && device_type != 1))
- printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n",
- s, drive->name, device_type);
- else if (removable == 0)
- printk(KERN_ERR "%s: %s: the removable flag is not set\n",
- s, drive->name);
- else if (drive->media == ide_floppy && drq_type == 3)
- printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not "
- "supported\n", s, drive->name, drq_type);
- else if (packet_size != 0)
- printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 "
- "bytes\n", s, drive->name, packet_size);
- else
- return 1;
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_check_atapi_device);
-
-void ide_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc, 0, sizeof(*pc));
-}
-EXPORT_SYMBOL_GPL(ide_init_pc);
-
-/*
- * Add a special packet command request to the tail of the request queue,
- * and wait for it to be serviced.
- */
-int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
- struct ide_atapi_pc *pc, void *buf, unsigned int bufflen)
-{
- struct request *rq;
- int error;
-
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_MISC;
- ide_req(rq)->special = pc;
-
- if (buf && bufflen) {
- error = blk_rq_map_kern(drive->queue, rq, buf, bufflen,
- GFP_NOIO);
- if (error)
- goto put_req;
- }
-
- memcpy(scsi_req(rq)->cmd, pc->c, 12);
- if (drive->media == ide_tape)
- scsi_req(rq)->cmd[13] = REQ_IDETAPE_PC1;
- blk_execute_rq(disk, rq, 0);
- error = scsi_req(rq)->result ? -EIO : 0;
-put_req:
- blk_put_request(rq);
- return error;
-}
-EXPORT_SYMBOL_GPL(ide_queue_pc_tail);
-
-int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
-{
- struct ide_atapi_pc pc;
-
- ide_init_pc(&pc);
- pc.c[0] = TEST_UNIT_READY;
-
- return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
-
-int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
-{
- struct ide_atapi_pc pc;
-
- ide_init_pc(&pc);
- pc.c[0] = START_STOP;
- pc.c[4] = start;
-
- if (drive->media == ide_tape)
- pc.flags |= PC_FLAG_WAIT_FOR_DSC;
-
- return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(ide_do_start_stop);
-
-int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
-{
- struct ide_atapi_pc pc;
-
- if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
- return 0;
-
- ide_init_pc(&pc);
- pc.c[0] = ALLOW_MEDIUM_REMOVAL;
- pc.c[4] = on;
-
- return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(ide_set_media_lock);
-
-void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = REQUEST_SENSE;
- if (drive->media == ide_floppy) {
- pc->c[4] = 255;
- pc->req_xfer = 18;
- } else {
- pc->c[4] = 20;
- pc->req_xfer = 20;
- }
-}
-EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd);
-
-void ide_prep_sense(ide_drive_t *drive, struct request *rq)
-{
- struct request_sense *sense = &drive->sense_data;
- struct request *sense_rq;
- struct scsi_request *req;
- unsigned int cmd_len, sense_len;
- int err;
-
- switch (drive->media) {
- case ide_floppy:
- cmd_len = 255;
- sense_len = 18;
- break;
- case ide_tape:
- cmd_len = 20;
- sense_len = 20;
- break;
- default:
- cmd_len = 18;
- sense_len = 18;
- }
-
- BUG_ON(sense_len > sizeof(*sense));
-
- if (ata_sense_request(rq) || drive->sense_rq_armed)
- return;
-
- sense_rq = drive->sense_rq;
- if (!sense_rq) {
- sense_rq = blk_mq_alloc_request(drive->queue, REQ_OP_DRV_IN,
- BLK_MQ_REQ_RESERVED | BLK_MQ_REQ_NOWAIT);
- drive->sense_rq = sense_rq;
- }
- req = scsi_req(sense_rq);
-
- memset(sense, 0, sizeof(*sense));
-
- scsi_req_init(req);
-
- err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
- GFP_NOIO);
- if (unlikely(err)) {
- if (printk_ratelimit())
- printk(KERN_WARNING PFX "%s: failed to map sense "
- "buffer\n", drive->name);
- blk_mq_free_request(sense_rq);
- drive->sense_rq = NULL;
- return;
- }
-
- sense_rq->rq_disk = rq->rq_disk;
- sense_rq->cmd_flags = REQ_OP_DRV_IN;
- ide_req(sense_rq)->type = ATA_PRIV_SENSE;
-
- req->cmd[0] = GPCMD_REQUEST_SENSE;
- req->cmd[4] = cmd_len;
- if (drive->media == ide_tape)
- req->cmd[13] = REQ_IDETAPE_PC1;
-
- drive->sense_rq_armed = true;
-}
-EXPORT_SYMBOL_GPL(ide_prep_sense);
-
-int ide_queue_sense_rq(ide_drive_t *drive, void *special)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *sense_rq;
- unsigned long flags;
-
- spin_lock_irqsave(&hwif->lock, flags);
-
- /* deferred failure from ide_prep_sense() */
- if (!drive->sense_rq_armed) {
- printk(KERN_WARNING PFX "%s: error queuing a sense request\n",
- drive->name);
- spin_unlock_irqrestore(&hwif->lock, flags);
- return -ENOMEM;
- }
-
- sense_rq = drive->sense_rq;
- ide_req(sense_rq)->special = special;
- drive->sense_rq_armed = false;
-
- drive->hwif->rq = NULL;
-
- ide_insert_request_head(drive, sense_rq);
- spin_unlock_irqrestore(&hwif->lock, flags);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_queue_sense_rq);
-
-/*
- * Called when an error was detected during the last packet command.
- * We queue a request sense packet command at the head of the request
- * queue.
- */
-void ide_retry_pc(ide_drive_t *drive)
-{
- struct request *failed_rq = drive->hwif->rq;
- struct request *sense_rq = drive->sense_rq;
- struct ide_atapi_pc *pc = &drive->request_sense_pc;
-
- (void)ide_read_error(drive);
-
- /* init pc from sense_rq */
- ide_init_pc(pc);
- memcpy(pc->c, scsi_req(sense_rq)->cmd, 12);
-
- if (drive->media == ide_tape)
- drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
-
- /*
- * Push back the failed request and put request sense on top
- * of it. The failed command will be retried after sense data
- * is acquired.
- */
- drive->hwif->rq = NULL;
- ide_requeue_and_plug(drive, failed_rq);
- if (ide_queue_sense_rq(drive, pc))
- ide_complete_rq(drive, BLK_STS_IOERR, blk_rq_bytes(failed_rq));
-}
-EXPORT_SYMBOL_GPL(ide_retry_pc);
-
-int ide_cd_expiry(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->rq;
- unsigned long wait = 0;
-
- debug_log("%s: scsi_req(rq)->cmd[0]: 0x%x\n", __func__, scsi_req(rq)->cmd[0]);
-
- /*
- * Some commands are *slow* and normally take a long time to complete.
- * Usually we can use the ATAPI "disconnect" to bypass this, but not all
- * commands/drives support that. Let ide_timer_expiry keep polling us
- * for these.
- */
- switch (scsi_req(rq)->cmd[0]) {
- case GPCMD_BLANK:
- case GPCMD_FORMAT_UNIT:
- case GPCMD_RESERVE_RZONE_TRACK:
- case GPCMD_CLOSE_TRACK:
- case GPCMD_FLUSH_CACHE:
- wait = ATAPI_WAIT_PC;
- break;
- default:
- if (!(rq->rq_flags & RQF_QUIET))
- printk(KERN_INFO PFX "cmd 0x%x timed out\n",
- scsi_req(rq)->cmd[0]);
- wait = 0;
- break;
- }
- return wait;
-}
-EXPORT_SYMBOL_GPL(ide_cd_expiry);
-
-int ide_cd_get_xferlen(struct request *rq)
-{
- switch (req_op(rq)) {
- default:
- return 32768;
- case REQ_OP_SCSI_IN:
- case REQ_OP_SCSI_OUT:
- return blk_rq_bytes(rq);
- case REQ_OP_DRV_IN:
- case REQ_OP_DRV_OUT:
- switch (ide_req(rq)->type) {
- case ATA_PRIV_PC:
- case ATA_PRIV_SENSE:
- return blk_rq_bytes(rq);
- default:
- return 0;
- }
- }
-}
-EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
-
-void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
-{
- struct ide_taskfile tf;
-
- drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT |
- IDE_VALID_LBAM | IDE_VALID_LBAH);
-
- *bcount = (tf.lbah << 8) | tf.lbam;
- *ireason = tf.nsect & 3;
-}
-EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
-
-/*
- * Check the contents of the interrupt reason register and attempt to recover if
- * there are problems.
- *
- * Returns:
- * - 0 if everything's ok
- * - 1 if the request has to be terminated.
- */
-int ide_check_ireason(ide_drive_t *drive, struct request *rq, int len,
- int ireason, int rw)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- debug_log("ireason: 0x%x, rw: 0x%x\n", ireason, rw);
-
- if (ireason == (!rw << 1))
- return 0;
- else if (ireason == (rw << 1)) {
- printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
- drive->name, __func__);
-
- if (dev_is_idecd(drive))
- ide_pad_transfer(drive, rw, len);
- } else if (!rw && ireason == ATAPI_COD) {
- if (dev_is_idecd(drive)) {
- /*
- * Some drives (ASUS) seem to tell us that status info
- * is available. Just get it and ignore.
- */
- (void)hwif->tp_ops->read_status(hwif);
- return 0;
- }
- } else {
- if (ireason & ATAPI_COD)
- printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name,
- __func__);
-
- /* drive wants a command packet, or invalid ireason... */
- printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
- drive->name, __func__, ireason);
- }
-
- if (dev_is_idecd(drive) && ata_pc_request(rq))
- rq->rq_flags |= RQF_FAILED;
-
- return 1;
-}
-EXPORT_SYMBOL_GPL(ide_check_ireason);
-
-/*
- * This is the usual interrupt handler which will be called during a packet
- * command. We will transfer some of the data (as requested by the drive)
- * and will re-point interrupt handler to us.
- */
-static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
-{
- struct ide_atapi_pc *pc = drive->pc;
- ide_hwif_t *hwif = drive->hwif;
- struct ide_cmd *cmd = &hwif->cmd;
- struct request *rq = hwif->rq;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- unsigned int timeout, done;
- u16 bcount;
- u8 stat, ireason, dsc = 0;
- u8 write = !!(pc->flags & PC_FLAG_WRITING);
-
- debug_log("Enter %s - interrupt handler\n", __func__);
-
- timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
- : WAIT_TAPE_CMD;
-
- /* Clear the interrupt */
- stat = tp_ops->read_status(hwif);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- int rc;
-
- drive->waiting_for_dma = 0;
- rc = hwif->dma_ops->dma_end(drive);
- ide_dma_unmap_sg(drive, cmd);
-
- if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) {
- if (drive->media == ide_floppy)
- printk(KERN_ERR PFX "%s: DMA %s error\n",
- drive->name, rq_data_dir(pc->rq)
- ? "write" : "read");
- pc->flags |= PC_FLAG_DMA_ERROR;
- } else
- scsi_req(rq)->resid_len = 0;
- debug_log("%s: DMA finished\n", drive->name);
- }
-
- /* No more interrupts */
- if ((stat & ATA_DRQ) == 0) {
- int uptodate;
- blk_status_t error;
-
- debug_log("Packet command completed, %d bytes transferred\n",
- blk_rq_bytes(rq));
-
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-
- local_irq_enable_in_hardirq();
-
- if (drive->media == ide_tape &&
- (stat & ATA_ERR) && scsi_req(rq)->cmd[0] == REQUEST_SENSE)
- stat &= ~ATA_ERR;
-
- if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log("%s: I/O error\n", drive->name);
-
- if (drive->media != ide_tape)
- scsi_req(pc->rq)->result++;
-
- if (scsi_req(rq)->cmd[0] == REQUEST_SENSE) {
- printk(KERN_ERR PFX "%s: I/O error in request "
- "sense command\n", drive->name);
- return ide_do_reset(drive);
- }
-
- debug_log("[cmd %x]: check condition\n", scsi_req(rq)->cmd[0]);
-
- /* Retry operation */
- ide_retry_pc(drive);
-
- /* queued, but not started */
- return ide_stopped;
- }
- pc->error = 0;
-
- if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
- dsc = 1;
-
- /*
- * ->pc_callback() might change rq->data_len for
- * residual count, cache total length.
- */
- done = blk_rq_bytes(rq);
-
- /* Command finished - Call the callback function */
- uptodate = drive->pc_callback(drive, dsc);
-
- if (uptodate == 0)
- drive->failed_pc = NULL;
-
- if (ata_misc_request(rq)) {
- scsi_req(rq)->result = 0;
- error = BLK_STS_OK;
- } else {
-
- if (blk_rq_is_passthrough(rq) && uptodate <= 0) {
- if (scsi_req(rq)->result == 0)
- scsi_req(rq)->result = -EIO;
- }
-
- error = uptodate ? BLK_STS_OK : BLK_STS_IOERR;
- }
-
- ide_complete_rq(drive, error, blk_rq_bytes(rq));
- return ide_stopped;
- }
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR PFX "%s: The device wants to issue more "
- "interrupts in DMA mode\n", drive->name);
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
-
- /* Get the number of bytes to transfer on this interrupt. */
- ide_read_bcount_and_ireason(drive, &bcount, &ireason);
-
- if (ide_check_ireason(drive, rq, bcount, ireason, write))
- return ide_do_reset(drive);
-
- done = min_t(unsigned int, bcount, cmd->nleft);
- ide_pio_bytes(drive, cmd, write, done);
-
- /* Update transferred byte count */
- scsi_req(rq)->resid_len -= done;
-
- bcount -= done;
-
- if (bcount)
- ide_pad_transfer(drive, write, bcount);
-
- debug_log("[cmd %x] transferred %d bytes, padded %d bytes, resid: %u\n",
- scsi_req(rq)->cmd[0], done, bcount, scsi_req(rq)->resid_len);
-
- /* And set the interrupt handler again */
- ide_set_handler(drive, ide_pc_intr, timeout);
- return ide_started;
-}
-
-static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf,
- u16 bcount, u8 dma)
-{
- cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO;
- cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM |
- IDE_VALID_FEATURE | valid_tf;
- cmd->tf.command = ATA_CMD_PACKET;
- cmd->tf.feature = dma; /* Use PIO/DMA */
- cmd->tf.lbam = bcount & 0xff;
- cmd->tf.lbah = (bcount >> 8) & 0xff;
-}
-
-static u8 ide_read_ireason(ide_drive_t *drive)
-{
- struct ide_taskfile tf;
-
- drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT);
-
- return tf.nsect & 3;
-}
-
-static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
-{
- int retries = 100;
-
- while (retries-- && ((ireason & ATAPI_COD) == 0 ||
- (ireason & ATAPI_IO))) {
- printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing "
- "a packet command, retrying\n", drive->name);
- udelay(100);
- ireason = ide_read_ireason(drive);
- if (retries == 0) {
- printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing"
- " a packet command, ignoring\n",
- drive->name);
- ireason |= ATAPI_COD;
- ireason &= ~ATAPI_IO;
- }
- }
-
- return ireason;
-}
-
-static int ide_delayed_transfer_pc(ide_drive_t *drive)
-{
- /* Send the actual packet */
- drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
-
- /* Timeout for the packet command */
- return WAIT_FLOPPY_CMD;
-}
-
-static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
-{
- struct ide_atapi_pc *pc;
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->rq;
- ide_expiry_t *expiry;
- unsigned int timeout;
- int cmd_len;
- ide_startstop_t startstop;
- u8 ireason;
-
- if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
- printk(KERN_ERR PFX "%s: Strange, packet command initiated yet "
- "DRQ isn't asserted\n", drive->name);
- return startstop;
- }
-
- if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
- if (drive->dma)
- drive->waiting_for_dma = 1;
- }
-
- if (dev_is_idecd(drive)) {
- /* ATAPI commands get padded out to 12 bytes minimum */
- cmd_len = COMMAND_SIZE(scsi_req(rq)->cmd[0]);
- if (cmd_len < ATAPI_MIN_CDB_BYTES)
- cmd_len = ATAPI_MIN_CDB_BYTES;
-
- timeout = rq->timeout;
- expiry = ide_cd_expiry;
- } else {
- pc = drive->pc;
-
- cmd_len = ATAPI_MIN_CDB_BYTES;
-
- /*
- * If necessary schedule the packet transfer to occur 'timeout'
- * milliseconds later in ide_delayed_transfer_pc() after the
- * device says it's ready for a packet.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = drive->pc_delay;
- expiry = &ide_delayed_transfer_pc;
- } else {
- timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
- : WAIT_TAPE_CMD;
- expiry = NULL;
- }
-
- ireason = ide_read_ireason(drive);
- if (drive->media == ide_tape)
- ireason = ide_wait_ireason(drive, ireason);
-
- if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
- printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while "
- "issuing a packet command\n", drive->name);
-
- return ide_do_reset(drive);
- }
- }
-
- hwif->expiry = expiry;
-
- /* Set the interrupt routine */
- ide_set_handler(drive,
- (dev_is_idecd(drive) ? drive->irq_handler
- : ide_pc_intr),
- timeout);
-
- /* Send the actual packet */
- if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
- hwif->tp_ops->output_data(drive, NULL, scsi_req(rq)->cmd, cmd_len);
-
- /* Begin DMA, if necessary */
- if (dev_is_idecd(drive)) {
- if (drive->dma)
- hwif->dma_ops->dma_start(drive);
- } else {
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
- }
-
- return ide_started;
-}
-
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- struct ide_atapi_pc *pc;
- ide_hwif_t *hwif = drive->hwif;
- ide_expiry_t *expiry = NULL;
- struct request *rq = hwif->rq;
- unsigned int timeout, bytes;
- u16 bcount;
- u8 valid_tf;
- u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT);
-
- if (dev_is_idecd(drive)) {
- valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL;
- bcount = ide_cd_get_xferlen(rq);
- expiry = ide_cd_expiry;
- timeout = ATAPI_WAIT_PC;
-
- if (drive->dma)
- drive->dma = !ide_dma_prepare(drive, cmd);
- } else {
- pc = drive->pc;
-
- valid_tf = IDE_VALID_DEVICE;
- bytes = blk_rq_bytes(rq);
- bcount = ((drive->media == ide_tape) ? bytes
- : min_t(unsigned int,
- bytes, 63 * 1024));
-
- /* We haven't transferred any data yet */
- scsi_req(rq)->resid_len = bcount;
-
- if (pc->flags & PC_FLAG_DMA_ERROR) {
- pc->flags &= ~PC_FLAG_DMA_ERROR;
- ide_dma_off(drive);
- }
-
- if (pc->flags & PC_FLAG_DMA_OK)
- drive->dma = !ide_dma_prepare(drive, cmd);
-
- if (!drive->dma)
- pc->flags &= ~PC_FLAG_DMA_OK;
-
- timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
- : WAIT_TAPE_CMD;
- }
-
- ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma);
-
- (void)do_rw_taskfile(drive, cmd);
-
- if (drq_int) {
- if (drive->dma)
- drive->waiting_for_dma = 0;
- hwif->expiry = expiry;
- }
-
- ide_execute_command(drive, cmd, ide_transfer_pc, timeout);
-
- return drq_int ? ide_started : ide_transfer_pc(drive);
-}
-EXPORT_SYMBOL_GPL(ide_issue_pc);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
deleted file mode 100644
index cffbcc27a34c..000000000000
--- a/drivers/ide/ide-cd.c
+++ /dev/null
@@ -1,1858 +0,0 @@
-/*
- * ATAPI CD-ROM driver.
- *
- * Copyright (C) 1994-1996 Scott Snyder <snyder@...ld0.fnal.gov>
- * Copyright (C) 1996-1998 Erik Andersen <andersee@...ian.org>
- * Copyright (C) 1998-2000 Jens Axboe <axboe@...e.de>
- * Copyright (C) 2005, 2007-2009 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * See Documentation/cdrom/ide-cd.rst for usage information.
- *
- * Suggestions are welcome. Patches that work are more welcome though. ;-)
- *
- * Documentation:
- * Mt. Fuji (SFF8090 version 4) and ATAPI (SFF-8020i rev 2.6) standards.
- *
- * For historical changelog please see:
- * Documentation/ide/ChangeLog.ide-cd.1994-2004
- */
-
-#define DRV_NAME "ide-cd"
-#define PFX DRV_NAME ": "
-
-#define IDECD_VERSION "5.00"
-
-#include <linux/compat.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched/task_stack.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/cdrom.h>
-#include <linux/ide.h>
-#include <linux/completion.h>
-#include <linux/mutex.h>
-#include <linux/bcd.h>
-
-/* For SCSI -> ATAPI command conversion */
-#include <scsi/scsi.h>
-
-#include <linux/io.h>
-#include <asm/byteorder.h>
-#include <linux/uaccess.h>
-#include <asm/unaligned.h>
-
-#include "ide-cd.h"
-
-static DEFINE_MUTEX(ide_cd_mutex);
-static DEFINE_MUTEX(idecd_ref_mutex);
-
-static void ide_cd_release(struct device *);
-
-static struct cdrom_info *ide_cd_get(struct gendisk *disk)
-{
- struct cdrom_info *cd = NULL;
-
- mutex_lock(&idecd_ref_mutex);
- cd = ide_drv_g(disk, cdrom_info);
- if (cd) {
- if (ide_device_get(cd->drive))
- cd = NULL;
- else
- get_device(&cd->dev);
-
- }
- mutex_unlock(&idecd_ref_mutex);
- return cd;
-}
-
-static void ide_cd_put(struct cdrom_info *cd)
-{
- ide_drive_t *drive = cd->drive;
-
- mutex_lock(&idecd_ref_mutex);
- put_device(&cd->dev);
- ide_device_put(drive);
- mutex_unlock(&idecd_ref_mutex);
-}
-
-/*
- * Generic packet command support and error handling routines.
- */
-
-/* Mark that we've seen a media change and invalidate our internal buffers. */
-static void cdrom_saw_media_change(ide_drive_t *drive)
-{
- drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
- drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
-}
-
-static int cdrom_log_sense(ide_drive_t *drive, struct request *rq)
-{
- struct request_sense *sense = &drive->sense_data;
- int log = 0;
-
- if (!sense || !rq || (rq->rq_flags & RQF_QUIET))
- return 0;
-
- ide_debug_log(IDE_DBG_SENSE, "sense_key: 0x%x", sense->sense_key);
-
- switch (sense->sense_key) {
- case NO_SENSE:
- case RECOVERED_ERROR:
- break;
- case NOT_READY:
- /*
- * don't care about tray state messages for e.g. capacity
- * commands or in-progress or becoming ready
- */
- if (sense->asc == 0x3a || sense->asc == 0x04)
- break;
- log = 1;
- break;
- case ILLEGAL_REQUEST:
- /*
- * don't log START_STOP unit with LoEj set, since we cannot
- * reliably check if drive can auto-close
- */
- if (scsi_req(rq)->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
- break;
- log = 1;
- break;
- case UNIT_ATTENTION:
- /*
- * Make good and sure we've seen this potential media change.
- * Some drives (i.e. Creative) fail to present the correct sense
- * key in the error register.
- */
- cdrom_saw_media_change(drive);
- break;
- default:
- log = 1;
- break;
- }
- return log;
-}
-
-static void cdrom_analyze_sense_data(ide_drive_t *drive,
- struct request *failed_command)
-{
- struct request_sense *sense = &drive->sense_data;
- struct cdrom_info *info = drive->driver_data;
- unsigned long sector;
- unsigned long bio_sectors;
-
- ide_debug_log(IDE_DBG_SENSE, "error_code: 0x%x, sense_key: 0x%x",
- sense->error_code, sense->sense_key);
-
- if (failed_command)
- ide_debug_log(IDE_DBG_SENSE, "failed cmd: 0x%x",
- failed_command->cmd[0]);
-
- if (!cdrom_log_sense(drive, failed_command))
- return;
-
- /*
- * If a read toc is executed for a CD-R or CD-RW medium where the first
- * toc has not been recorded yet, it will fail with 05/24/00 (which is a
- * confusing error)
- */
- if (failed_command && scsi_req(failed_command)->cmd[0] == GPCMD_READ_TOC_PMA_ATIP)
- if (sense->sense_key == 0x05 && sense->asc == 0x24)
- return;
-
- /* current error */
- if (sense->error_code == 0x70) {
- switch (sense->sense_key) {
- case MEDIUM_ERROR:
- case VOLUME_OVERFLOW:
- case ILLEGAL_REQUEST:
- if (!sense->valid)
- break;
- if (failed_command == NULL ||
- blk_rq_is_passthrough(failed_command))
- break;
- sector = (sense->information[0] << 24) |
- (sense->information[1] << 16) |
- (sense->information[2] << 8) |
- (sense->information[3]);
-
- if (queue_logical_block_size(drive->queue) == 2048)
- /* device sector size is 2K */
- sector <<= 2;
-
- bio_sectors = max(bio_sectors(failed_command->bio), 4U);
- sector &= ~(bio_sectors - 1);
-
- /*
- * The SCSI specification allows for the value
- * returned by READ CAPACITY to be up to 75 2K
- * sectors past the last readable block.
- * Therefore, if we hit a medium error within the
- * last 75 2K sectors, we decrease the saved size
- * value.
- */
- if (sector < get_capacity(info->disk) &&
- drive->probed_capacity - sector < 4 * 75)
- set_capacity(info->disk, sector);
- }
- }
-
- ide_cd_log_error(drive->name, failed_command, sense);
-}
-
-static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq)
-{
- /*
- * For ATA_PRIV_SENSE, "ide_req(rq)->special" points to the original
- * failed request. Also, the sense data should be read
- * directly from rq which might be different from the original
- * sense buffer if it got copied during mapping.
- */
- struct request *failed = ide_req(rq)->special;
- void *sense = bio_data(rq->bio);
-
- if (failed) {
- /*
- * Sense is always read into drive->sense_data, copy back to the
- * original request.
- */
- memcpy(scsi_req(failed)->sense, sense, 18);
- scsi_req(failed)->sense_len = scsi_req(rq)->sense_len;
- cdrom_analyze_sense_data(drive, failed);
-
- if (ide_end_rq(drive, failed, BLK_STS_IOERR, blk_rq_bytes(failed)))
- BUG();
- } else
- cdrom_analyze_sense_data(drive, NULL);
-}
-
-
-/*
- * Allow the drive 5 seconds to recover; some devices will return NOT_READY
- * while flushing data from cache.
- *
- * returns: 0 failed (write timeout expired)
- * 1 success
- */
-static int ide_cd_breathe(ide_drive_t *drive, struct request *rq)
-{
-
- struct cdrom_info *info = drive->driver_data;
-
- if (!scsi_req(rq)->result)
- info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY;
-
- scsi_req(rq)->result = 1;
-
- if (time_after(jiffies, info->write_timeout))
- return 0;
- else {
- /*
- * take a breather
- */
- blk_mq_requeue_request(rq, false);
- blk_mq_delay_kick_requeue_list(drive->queue, 1);
- return 1;
- }
-}
-
-static void ide_cd_free_sense(ide_drive_t *drive)
-{
- if (!drive->sense_rq)
- return;
-
- blk_mq_free_request(drive->sense_rq);
- drive->sense_rq = NULL;
- drive->sense_rq_armed = false;
-}
-
-/**
- * Returns:
- * 0: if the request should be continued.
- * 1: if the request will be going through error recovery.
- * 2: if the request should be ended.
- */
-static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->rq;
- int err, sense_key, do_end_request = 0;
-
- /* get the IDE error register */
- err = ide_read_error(drive);
- sense_key = err >> 4;
-
- ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, rq->cmd_type: 0x%x, err: 0x%x, "
- "stat 0x%x",
- rq->cmd[0], rq->cmd_type, err, stat);
-
- if (ata_sense_request(rq)) {
- /*
- * We got an error trying to get sense info from the drive
- * (probably while trying to recover from a former error).
- * Just give up.
- */
- rq->rq_flags |= RQF_FAILED;
- return 2;
- }
-
- /* if we have an error, pass CHECK_CONDITION as the SCSI status byte */
- if (blk_rq_is_scsi(rq) && !scsi_req(rq)->result)
- scsi_req(rq)->result = SAM_STAT_CHECK_CONDITION;
-
- if (blk_noretry_request(rq))
- do_end_request = 1;
-
- switch (sense_key) {
- case NOT_READY:
- if (req_op(rq) == REQ_OP_WRITE) {
- if (ide_cd_breathe(drive, rq))
- return 1;
- } else {
- cdrom_saw_media_change(drive);
-
- if (!blk_rq_is_passthrough(rq) &&
- !(rq->rq_flags & RQF_QUIET))
- printk(KERN_ERR PFX "%s: tray open\n",
- drive->name);
- }
- do_end_request = 1;
- break;
- case UNIT_ATTENTION:
- cdrom_saw_media_change(drive);
-
- if (blk_rq_is_passthrough(rq))
- return 0;
-
- /*
- * Arrange to retry the request but be sure to give up if we've
- * retried too many times.
- */
- if (++scsi_req(rq)->result > ERROR_MAX)
- do_end_request = 1;
- break;
- case ILLEGAL_REQUEST:
- /*
- * Don't print error message for this condition -- SFF8090i
- * indicates that 5/24/00 is the correct response to a request
- * to close the tray if the drive doesn't have that capability.
- *
- * cdrom_log_sense() knows this!
- */
- if (scsi_req(rq)->cmd[0] == GPCMD_START_STOP_UNIT)
- break;
- fallthrough;
- case DATA_PROTECT:
- /*
- * No point in retrying after an illegal request or data
- * protect error.
- */
- if (!(rq->rq_flags & RQF_QUIET))
- ide_dump_status(drive, "command error", stat);
- do_end_request = 1;
- break;
- case MEDIUM_ERROR:
- /*
- * No point in re-trying a zillion times on a bad sector.
- * If we got here the error is not correctable.
- */
- if (!(rq->rq_flags & RQF_QUIET))
- ide_dump_status(drive, "media error "
- "(bad sector)", stat);
- do_end_request = 1;
- break;
- case BLANK_CHECK:
- /* disk appears blank? */
- if (!(rq->rq_flags & RQF_QUIET))
- ide_dump_status(drive, "media error (blank)",
- stat);
- do_end_request = 1;
- break;
- default:
- if (blk_rq_is_passthrough(rq))
- break;
- if (err & ~ATA_ABORTED) {
- /* go to the default handler for other errors */
- ide_error(drive, "cdrom_decode_status", stat);
- return 1;
- } else if (++scsi_req(rq)->result > ERROR_MAX)
- /* we've racked up too many retries, abort */
- do_end_request = 1;
- }
-
- if (blk_rq_is_passthrough(rq)) {
- rq->rq_flags |= RQF_FAILED;
- do_end_request = 1;
- }
-
- /*
- * End a request through request sense analysis when we have sense data.
- * We need this in order to perform end of media processing.
- */
- if (do_end_request)
- goto end_request;
-
- /* if we got a CHECK_CONDITION status, queue a request sense command */
- if (stat & ATA_ERR)
- return ide_queue_sense_rq(drive, NULL) ? 2 : 1;
- return 1;
-
-end_request:
- if (stat & ATA_ERR) {
- hwif->rq = NULL;
- return ide_queue_sense_rq(drive, rq) ? 2 : 1;
- } else
- return 2;
-}
-
-static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- struct request *rq = cmd->rq;
-
- ide_debug_log(IDE_DBG_FUNC, "rq->cmd[0]: 0x%x", rq->cmd[0]);
-
- /*
- * Some of the trailing request sense fields are optional,
- * and some drives don't send them. Sigh.
- */
- if (scsi_req(rq)->cmd[0] == GPCMD_REQUEST_SENSE &&
- cmd->nleft > 0 && cmd->nleft <= 5)
- cmd->nleft = 0;
-}
-
-int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
- int write, void *buffer, unsigned *bufflen,
- struct scsi_sense_hdr *sshdr, int timeout,
- req_flags_t rq_flags)
-{
- struct cdrom_info *info = drive->driver_data;
- struct scsi_sense_hdr local_sshdr;
- int retries = 10;
- bool failed;
-
- ide_debug_log(IDE_DBG_PC, "cmd[0]: 0x%x, write: 0x%x, timeout: %d, "
- "rq_flags: 0x%x",
- cmd[0], write, timeout, rq_flags);
-
- if (!sshdr)
- sshdr = &local_sshdr;
-
- /* start of retry loop */
- do {
- struct request *rq;
- int error;
- bool delay = false;
-
- rq = blk_get_request(drive->queue,
- write ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0);
- memcpy(scsi_req(rq)->cmd, cmd, BLK_MAX_CDB);
- ide_req(rq)->type = ATA_PRIV_PC;
- rq->rq_flags |= rq_flags;
- rq->timeout = timeout;
- if (buffer) {
- error = blk_rq_map_kern(drive->queue, rq, buffer,
- *bufflen, GFP_NOIO);
- if (error) {
- blk_put_request(rq);
- return error;
- }
- }
-
- blk_execute_rq(info->disk, rq, 0);
- error = scsi_req(rq)->result ? -EIO : 0;
-
- if (buffer)
- *bufflen = scsi_req(rq)->resid_len;
- scsi_normalize_sense(scsi_req(rq)->sense,
- scsi_req(rq)->sense_len, sshdr);
-
- /*
- * FIXME: we should probably abort/retry or something in case of
- * failure.
- */
- failed = (rq->rq_flags & RQF_FAILED) != 0;
- if (failed) {
- /*
- * The request failed. Retry if it was due to a unit
- * attention status (usually means media was changed).
- */
- if (sshdr->sense_key == UNIT_ATTENTION)
- cdrom_saw_media_change(drive);
- else if (sshdr->sense_key == NOT_READY &&
- sshdr->asc == 4 && sshdr->ascq != 4) {
- /*
- * The drive is in the process of loading
- * a disk. Retry, but wait a little to give
- * the drive time to complete the load.
- */
- delay = true;
- } else {
- /* otherwise, don't retry */
- retries = 0;
- }
- --retries;
- }
- blk_put_request(rq);
- if (delay)
- ssleep(2);
- } while (failed && retries >= 0);
-
- /* return an error if the command failed */
- return failed ? -EIO : 0;
-}
-
-/*
- * returns true if rq has been completed
- */
-static bool ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- unsigned int nr_bytes = cmd->nbytes - cmd->nleft;
-
- if (cmd->tf_flags & IDE_TFLAG_WRITE)
- nr_bytes -= cmd->last_xfer_len;
-
- if (nr_bytes > 0) {
- ide_complete_rq(drive, BLK_STS_OK, nr_bytes);
- return true;
- }
-
- return false;
-}
-
-/* standard prep_rq that builds 10 byte cmds */
-static bool ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
-{
- int hard_sect = queue_logical_block_size(q);
- long block = (long)blk_rq_pos(rq) / (hard_sect >> 9);
- unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9);
- struct scsi_request *req = scsi_req(rq);
-
- if (rq_data_dir(rq) == READ)
- req->cmd[0] = GPCMD_READ_10;
- else
- req->cmd[0] = GPCMD_WRITE_10;
-
- /*
- * fill in lba
- */
- req->cmd[2] = (block >> 24) & 0xff;
- req->cmd[3] = (block >> 16) & 0xff;
- req->cmd[4] = (block >> 8) & 0xff;
- req->cmd[5] = block & 0xff;
-
- /*
- * and transfer length
- */
- req->cmd[7] = (blocks >> 8) & 0xff;
- req->cmd[8] = blocks & 0xff;
- req->cmd_len = 10;
- return true;
-}
-
-/*
- * Most of the SCSI commands are supported directly by ATAPI devices.
- * This transform handles the few exceptions.
- */
-static bool ide_cdrom_prep_pc(struct request *rq)
-{
- u8 *c = scsi_req(rq)->cmd;
-
- /* transform 6-byte read/write commands to the 10-byte version */
- if (c[0] == READ_6 || c[0] == WRITE_6) {
- c[8] = c[4];
- c[5] = c[3];
- c[4] = c[2];
- c[3] = c[1] & 0x1f;
- c[2] = 0;
- c[1] &= 0xe0;
- c[0] += (READ_10 - READ_6);
- scsi_req(rq)->cmd_len = 10;
- return true;
- }
-
- /*
- * it's silly to pretend we understand 6-byte sense commands, just
- * reject with ILLEGAL_REQUEST and the caller should take the
- * appropriate action
- */
- if (c[0] == MODE_SENSE || c[0] == MODE_SELECT) {
- scsi_req(rq)->result = ILLEGAL_REQUEST;
- return false;
- }
-
- return true;
-}
-
-static bool ide_cdrom_prep_rq(ide_drive_t *drive, struct request *rq)
-{
- if (!blk_rq_is_passthrough(rq)) {
- scsi_req_init(scsi_req(rq));
-
- return ide_cdrom_prep_fs(drive->queue, rq);
- } else if (blk_rq_is_scsi(rq))
- return ide_cdrom_prep_pc(rq);
-
- return true;
-}
-
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_cmd *cmd = &hwif->cmd;
- struct request *rq = hwif->rq;
- ide_expiry_t *expiry = NULL;
- int dma_error = 0, dma, thislen, uptodate = 0;
- int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0;
- int sense = ata_sense_request(rq);
- unsigned int timeout;
- u16 len;
- u8 ireason, stat;
-
- ide_debug_log(IDE_DBG_PC, "cmd: 0x%x, write: 0x%x", rq->cmd[0], write);
-
- /* check for errors */
- dma = drive->dma;
- if (dma) {
- drive->dma = 0;
- drive->waiting_for_dma = 0;
- dma_error = hwif->dma_ops->dma_end(drive);
- ide_dma_unmap_sg(drive, cmd);
- if (dma_error) {
- printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name,
- write ? "write" : "read");
- ide_dma_off(drive);
- }
- }
-
- /* check status */
- stat = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, 0, BAD_R_STAT)) {
- rc = cdrom_decode_status(drive, stat);
- if (rc) {
- if (rc == 2)
- goto out_end;
- return ide_stopped;
- }
- }
-
- /* using dma, transfer is complete now */
- if (dma) {
- if (dma_error)
- return ide_error(drive, "dma error", stat);
- uptodate = 1;
- goto out_end;
- }
-
- ide_read_bcount_and_ireason(drive, &len, &ireason);
-
- thislen = !blk_rq_is_passthrough(rq) ? len : cmd->nleft;
- if (thislen > len)
- thislen = len;
-
- ide_debug_log(IDE_DBG_PC, "DRQ: stat: 0x%x, thislen: %d",
- stat, thislen);
-
- /* If DRQ is clear, the command has completed. */
- if ((stat & ATA_DRQ) == 0) {
- switch (req_op(rq)) {
- default:
- /*
- * If we're not done reading/writing, complain.
- * Otherwise, complete the command normally.
- */
- uptodate = 1;
- if (cmd->nleft > 0) {
- printk(KERN_ERR PFX "%s: %s: data underrun "
- "(%u bytes)\n", drive->name, __func__,
- cmd->nleft);
- if (!write)
- rq->rq_flags |= RQF_FAILED;
- uptodate = 0;
- }
- goto out_end;
- case REQ_OP_DRV_IN:
- case REQ_OP_DRV_OUT:
- ide_cd_request_sense_fixup(drive, cmd);
-
- uptodate = cmd->nleft ? 0 : 1;
-
- /*
- * suck out the remaining bytes from the drive in an
- * attempt to complete the data xfer. (see BZ#13399)
- */
- if (!(stat & ATA_ERR) && !uptodate && thislen) {
- ide_pio_bytes(drive, cmd, write, thislen);
- uptodate = cmd->nleft ? 0 : 1;
- }
-
- if (!uptodate)
- rq->rq_flags |= RQF_FAILED;
- goto out_end;
- case REQ_OP_SCSI_IN:
- case REQ_OP_SCSI_OUT:
- goto out_end;
- }
- }
-
- rc = ide_check_ireason(drive, rq, len, ireason, write);
- if (rc)
- goto out_end;
-
- cmd->last_xfer_len = 0;
-
- ide_debug_log(IDE_DBG_PC, "data transfer, rq->cmd_type: 0x%x, "
- "ireason: 0x%x",
- rq->cmd_type, ireason);
-
- /* transfer data */
- while (thislen > 0) {
- int blen = min_t(int, thislen, cmd->nleft);
-
- if (cmd->nleft == 0)
- break;
-
- ide_pio_bytes(drive, cmd, write, blen);
- cmd->last_xfer_len += blen;
-
- thislen -= blen;
- len -= blen;
-
- if (sense && write == 0)
- scsi_req(rq)->sense_len += blen;
- }
-
- /* pad, if necessary */
- if (len > 0) {
- if (blk_rq_is_passthrough(rq) || write == 0)
- ide_pad_transfer(drive, write, len);
- else {
- printk(KERN_ERR PFX "%s: confused, missing data\n",
- drive->name);
- blk_dump_rq_flags(rq, "cdrom_newpc_intr");
- }
- }
-
- switch (req_op(rq)) {
- case REQ_OP_SCSI_IN:
- case REQ_OP_SCSI_OUT:
- timeout = rq->timeout;
- break;
- case REQ_OP_DRV_IN:
- case REQ_OP_DRV_OUT:
- expiry = ide_cd_expiry;
- fallthrough;
- default:
- timeout = ATAPI_WAIT_PC;
- break;
- }
-
- hwif->expiry = expiry;
- ide_set_handler(drive, cdrom_newpc_intr, timeout);
- return ide_started;
-
-out_end:
- if (blk_rq_is_scsi(rq) && rc == 0) {
- scsi_req(rq)->resid_len = 0;
- blk_mq_end_request(rq, BLK_STS_OK);
- hwif->rq = NULL;
- } else {
- if (sense && uptodate)
- ide_cd_complete_failed_rq(drive, rq);
-
- if (!blk_rq_is_passthrough(rq)) {
- if (cmd->nleft == 0)
- uptodate = 1;
- } else {
- if (uptodate <= 0 && scsi_req(rq)->result == 0)
- scsi_req(rq)->result = -EIO;
- }
-
- if (uptodate == 0 && rq->bio)
- if (ide_cd_error_cmd(drive, cmd))
- return ide_stopped;
-
- /* make sure it's fully ended */
- if (blk_rq_is_passthrough(rq)) {
- scsi_req(rq)->resid_len -= cmd->nbytes - cmd->nleft;
- if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
- scsi_req(rq)->resid_len += cmd->last_xfer_len;
- }
-
- ide_complete_rq(drive, uptodate ? BLK_STS_OK : BLK_STS_IOERR, blk_rq_bytes(rq));
-
- if (sense && rc == 2)
- ide_error(drive, "request sense failure", stat);
- }
-
- ide_cd_free_sense(drive);
- return ide_stopped;
-}
-
-static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
-{
- struct cdrom_info *cd = drive->driver_data;
- struct request_queue *q = drive->queue;
- int write = rq_data_dir(rq) == WRITE;
- unsigned short sectors_per_frame =
- queue_logical_block_size(q) >> SECTOR_SHIFT;
-
- ide_debug_log(IDE_DBG_RQ, "rq->cmd[0]: 0x%x, rq->cmd_flags: 0x%x, "
- "secs_per_frame: %u",
- rq->cmd[0], rq->cmd_flags, sectors_per_frame);
-
- if (write) {
- /* disk has become write protected */
- if (get_disk_ro(cd->disk))
- return ide_stopped;
- } else {
- /*
- * We may be retrying this request after an error. Fix up any
- * weirdness which might be present in the request packet.
- */
- ide_cdrom_prep_rq(drive, rq);
- }
-
- /* fs requests *must* be hardware frame aligned */
- if ((blk_rq_sectors(rq) & (sectors_per_frame - 1)) ||
- (blk_rq_pos(rq) & (sectors_per_frame - 1)))
- return ide_stopped;
-
- /* use DMA, if possible */
- drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
-
- if (write)
- cd->devinfo.media_written = 1;
-
- rq->timeout = ATAPI_WAIT_PC;
-
- return ide_started;
-}
-
-static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
-{
-
- ide_debug_log(IDE_DBG_PC, "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x",
- rq->cmd[0], rq->cmd_type);
-
- if (blk_rq_is_scsi(rq))
- rq->rq_flags |= RQF_QUIET;
- else
- rq->rq_flags &= ~RQF_FAILED;
-
- drive->dma = 0;
-
- /* sg request */
- if (rq->bio) {
- struct request_queue *q = drive->queue;
- char *buf = bio_data(rq->bio);
- unsigned int alignment;
-
- drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
-
- /*
- * check if dma is safe
- *
- * NOTE! The "len" and "addr" checks should possibly have
- * separate masks.
- */
- alignment = queue_dma_alignment(q) | q->dma_pad_mask;
- if ((unsigned long)buf & alignment
- || blk_rq_bytes(rq) & q->dma_pad_mask
- || object_is_on_stack(buf))
- drive->dma = 0;
- }
-}
-
-static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
- sector_t block)
-{
- struct ide_cmd cmd;
- int uptodate = 0;
- unsigned int nsectors;
-
- ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, block: %llu",
- rq->cmd[0], (unsigned long long)block);
-
- if (drive->debug_mask & IDE_DBG_RQ)
- blk_dump_rq_flags(rq, "ide_cd_do_request");
-
- switch (req_op(rq)) {
- default:
- if (cdrom_start_rw(drive, rq) == ide_stopped)
- goto out_end;
- break;
- case REQ_OP_SCSI_IN:
- case REQ_OP_SCSI_OUT:
- handle_pc:
- if (!rq->timeout)
- rq->timeout = ATAPI_WAIT_PC;
- cdrom_do_block_pc(drive, rq);
- break;
- case REQ_OP_DRV_IN:
- case REQ_OP_DRV_OUT:
- switch (ide_req(rq)->type) {
- case ATA_PRIV_MISC:
- /* right now this can only be a reset... */
- uptodate = 1;
- goto out_end;
- case ATA_PRIV_SENSE:
- case ATA_PRIV_PC:
- goto handle_pc;
- default:
- BUG();
- }
- }
-
- /* prepare sense request for this command */
- ide_prep_sense(drive, rq);
-
- memset(&cmd, 0, sizeof(cmd));
-
- if (rq_data_dir(rq))
- cmd.tf_flags |= IDE_TFLAG_WRITE;
-
- cmd.rq = rq;
-
- if (!blk_rq_is_passthrough(rq) || blk_rq_bytes(rq)) {
- ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
- ide_map_sg(drive, &cmd);
- }
-
- return ide_issue_pc(drive, &cmd);
-out_end:
- nsectors = blk_rq_sectors(rq);
-
- if (nsectors == 0)
- nsectors = 1;
-
- ide_complete_rq(drive, uptodate ? BLK_STS_OK : BLK_STS_IOERR, nsectors << 9);
-
- return ide_stopped;
-}
-
-/*
- * Ioctl handling.
- *
- * Routines which queue packet commands take as a final argument a pointer to a
- * request_sense struct. If execution of the command results in an error with a
- * CHECK CONDITION status, this structure will be filled with the results of the
- * subsequent request sense command. The pointer can also be NULL, in which case
- * no sense information is returned.
- */
-static void msf_from_bcd(struct atapi_msf *msf)
-{
- msf->minute = bcd2bin(msf->minute);
- msf->second = bcd2bin(msf->second);
- msf->frame = bcd2bin(msf->frame);
-}
-
-int cdrom_check_status(ide_drive_t *drive, struct scsi_sense_hdr *sshdr)
-{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi;
- unsigned char cmd[BLK_MAX_CDB];
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- if (!info)
- return -EIO;
-
- cdi = &info->devinfo;
-
- memset(cmd, 0, BLK_MAX_CDB);
- cmd[0] = GPCMD_TEST_UNIT_READY;
-
- /*
- * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
- * instead of supporting the LOAD_UNLOAD opcode.
- */
- cmd[7] = cdi->sanyo_slot % 3;
-
- return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, sshdr, 0, RQF_QUIET);
-}
-
-static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
- unsigned long *sectors_per_frame)
-{
- struct {
- __be32 lba;
- __be32 blocklen;
- } capbuf;
-
- int stat;
- unsigned char cmd[BLK_MAX_CDB];
- unsigned len = sizeof(capbuf);
- u32 blocklen;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- memset(cmd, 0, BLK_MAX_CDB);
- cmd[0] = GPCMD_READ_CDVD_CAPACITY;
-
- stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, NULL, 0,
- RQF_QUIET);
- if (stat)
- return stat;
-
- /*
- * Sanity check the given block size, in so far as making
- * sure the sectors_per_frame we give to the caller won't
- * end up being bogus.
- */
- blocklen = be32_to_cpu(capbuf.blocklen);
- blocklen = (blocklen >> SECTOR_SHIFT) << SECTOR_SHIFT;
- switch (blocklen) {
- case 512:
- case 1024:
- case 2048:
- case 4096:
- break;
- default:
- printk_once(KERN_ERR PFX "%s: weird block size %u; "
- "setting default block size to 2048\n",
- drive->name, blocklen);
- blocklen = 2048;
- break;
- }
-
- *capacity = 1 + be32_to_cpu(capbuf.lba);
- *sectors_per_frame = blocklen >> SECTOR_SHIFT;
-
- ide_debug_log(IDE_DBG_PROBE, "cap: %lu, sectors_per_frame: %lu",
- *capacity, *sectors_per_frame);
-
- return 0;
-}
-
-static int ide_cdrom_read_tocentry(ide_drive_t *drive, int trackno,
- int msf_flag, int format, char *buf, int buflen)
-{
- unsigned char cmd[BLK_MAX_CDB];
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- memset(cmd, 0, BLK_MAX_CDB);
-
- cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
- cmd[6] = trackno;
- cmd[7] = (buflen >> 8);
- cmd[8] = (buflen & 0xff);
- cmd[9] = (format << 6);
-
- if (msf_flag)
- cmd[1] = 2;
-
- return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, NULL, 0, RQF_QUIET);
-}
-
-/* Try to read the entire TOC for the disk into our internal buffer. */
-int ide_cd_read_toc(ide_drive_t *drive)
-{
- int stat, ntracks, i;
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi = &info->devinfo;
- struct atapi_toc *toc = info->toc;
- struct {
- struct atapi_toc_header hdr;
- struct atapi_toc_entry ent;
- } ms_tmp;
- long last_written;
- unsigned long sectors_per_frame = SECTORS_PER_FRAME;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- if (toc == NULL) {
- /* try to allocate space */
- toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
- if (toc == NULL) {
- printk(KERN_ERR PFX "%s: No cdrom TOC buffer!\n",
- drive->name);
- return -ENOMEM;
- }
- info->toc = toc;
- }
-
- /*
- * Check to see if the existing data is still valid. If it is,
- * just return.
- */
- (void) cdrom_check_status(drive, NULL);
-
- if (drive->atapi_flags & IDE_AFLAG_TOC_VALID)
- return 0;
-
- /* try to get the total cdrom capacity and sector size */
- stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame);
- if (stat)
- toc->capacity = 0x1fffff;
-
- set_capacity(info->disk, toc->capacity * sectors_per_frame);
- /* save a private copy of the TOC capacity for error handling */
- drive->probed_capacity = toc->capacity * sectors_per_frame;
-
- blk_queue_logical_block_size(drive->queue,
- sectors_per_frame << SECTOR_SHIFT);
-
- /* first read just the header, so we know how long the TOC is */
- stat = ide_cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
- sizeof(struct atapi_toc_header));
- if (stat)
- return stat;
-
- if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
- toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
- }
-
- ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
- if (ntracks <= 0)
- return -EIO;
- if (ntracks > MAX_TRACKS)
- ntracks = MAX_TRACKS;
-
- /* now read the whole schmeer */
- stat = ide_cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0,
- (char *)&toc->hdr,
- sizeof(struct atapi_toc_header) +
- (ntracks + 1) *
- sizeof(struct atapi_toc_entry));
-
- if (stat && toc->hdr.first_track > 1) {
- /*
- * Cds with CDI tracks only don't have any TOC entries, despite
- * of this the returned values are
- * first_track == last_track = number of CDI tracks + 1,
- * so that this case is indistinguishable from the same layout
- * plus an additional audio track. If we get an error for the
- * regular case, we assume a CDI without additional audio
- * tracks. In this case the readable TOC is empty (CDI tracks
- * are not included) and only holds the Leadout entry.
- *
- * Heiko Eißfeldt.
- */
- ntracks = 0;
- stat = ide_cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0,
- (char *)&toc->hdr,
- sizeof(struct atapi_toc_header) +
- (ntracks + 1) *
- sizeof(struct atapi_toc_entry));
- if (stat)
- return stat;
-
- if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
- toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
- } else {
- toc->hdr.first_track = CDROM_LEADOUT;
- toc->hdr.last_track = CDROM_LEADOUT;
- }
- }
-
- if (stat)
- return stat;
-
- toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
-
- if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
- toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
- }
-
- for (i = 0; i <= ntracks; i++) {
- if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
- if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
- toc->ent[i].track = bcd2bin(toc->ent[i].track);
- msf_from_bcd(&toc->ent[i].addr.msf);
- }
- toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
- toc->ent[i].addr.msf.second,
- toc->ent[i].addr.msf.frame);
- }
-
- if (toc->hdr.first_track != CDROM_LEADOUT) {
- /* read the multisession information */
- stat = ide_cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
- sizeof(ms_tmp));
- if (stat)
- return stat;
-
- toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
- } else {
- ms_tmp.hdr.last_track = CDROM_LEADOUT;
- ms_tmp.hdr.first_track = ms_tmp.hdr.last_track;
- toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
- }
-
- if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
- /* re-read multisession information using MSF format */
- stat = ide_cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
- sizeof(ms_tmp));
- if (stat)
- return stat;
-
- msf_from_bcd(&ms_tmp.ent.addr.msf);
- toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
- ms_tmp.ent.addr.msf.second,
- ms_tmp.ent.addr.msf.frame);
- }
-
- toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
-
- /* now try to get the total cdrom capacity */
- stat = cdrom_get_last_written(cdi, &last_written);
- if (!stat && (last_written > toc->capacity)) {
- toc->capacity = last_written;
- set_capacity(info->disk, toc->capacity * sectors_per_frame);
- drive->probed_capacity = toc->capacity * sectors_per_frame;
- }
-
- /* Remember that we've read this stuff. */
- drive->atapi_flags |= IDE_AFLAG_TOC_VALID;
-
- return 0;
-}
-
-int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
-{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *cdi = &info->devinfo;
- struct packet_command cgc;
- int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
- size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
-
- init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
- do {
- /* we seem to get stat=0x01,err=0x00 the first time (??) */
- stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
- if (!stat)
- break;
- } while (--attempts);
- return stat;
-}
-
-void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
-{
- struct cdrom_info *cd = drive->driver_data;
- u16 curspeed, maxspeed;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
- curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
- maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
- } else {
- curspeed = be16_to_cpup((__be16 *)&buf[8 + 14]);
- maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
- }
-
- ide_debug_log(IDE_DBG_PROBE, "curspeed: %u, maxspeed: %u",
- curspeed, maxspeed);
-
- cd->current_speed = DIV_ROUND_CLOSEST(curspeed, 176);
- cd->max_speed = DIV_ROUND_CLOSEST(maxspeed, 176);
-}
-
-#define IDE_CD_CAPABILITIES \
- (CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | \
- CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | \
- CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R | \
- CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_GENERIC_PACKET | \
- CDC_MO_DRIVE | CDC_MRW | CDC_MRW_W | CDC_RAM)
-
-static const struct cdrom_device_ops ide_cdrom_dops = {
- .open = ide_cdrom_open_real,
- .release = ide_cdrom_release_real,
- .drive_status = ide_cdrom_drive_status,
- .check_events = ide_cdrom_check_events_real,
- .tray_move = ide_cdrom_tray_move,
- .lock_door = ide_cdrom_lock_door,
- .select_speed = ide_cdrom_select_speed,
- .get_last_session = ide_cdrom_get_last_session,
- .get_mcn = ide_cdrom_get_mcn,
- .reset = ide_cdrom_reset,
- .audio_ioctl = ide_cdrom_audio_ioctl,
- .capability = IDE_CD_CAPABILITIES,
- .generic_packet = ide_cdrom_packet,
-};
-
-static int ide_cdrom_register(ide_drive_t *drive, int nslots)
-{
- struct cdrom_info *info = drive->driver_data;
- struct cdrom_device_info *devinfo = &info->devinfo;
-
- ide_debug_log(IDE_DBG_PROBE, "nslots: %d", nslots);
-
- devinfo->ops = &ide_cdrom_dops;
- devinfo->speed = info->current_speed;
- devinfo->capacity = nslots;
- devinfo->handle = drive;
- strcpy(devinfo->name, drive->name);
-
- if (drive->atapi_flags & IDE_AFLAG_NO_SPEED_SELECT)
- devinfo->mask |= CDC_SELECT_SPEED;
-
- return register_cdrom(info->disk, devinfo);
-}
-
-static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
-{
- struct cdrom_info *cd = drive->driver_data;
- struct cdrom_device_info *cdi = &cd->devinfo;
- u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
- mechtype_t mechtype;
- int nslots = 1;
-
- ide_debug_log(IDE_DBG_PROBE, "media: 0x%x, atapi_flags: 0x%lx",
- drive->media, drive->atapi_flags);
-
- cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
- CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
- CDC_MO_DRIVE | CDC_RAM);
-
- if (drive->media == ide_optical) {
- cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
- printk(KERN_ERR PFX "%s: ATAPI magneto-optical drive\n",
- drive->name);
- return nslots;
- }
-
- if (drive->atapi_flags & IDE_AFLAG_PRE_ATAPI12) {
- drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
- cdi->mask &= ~CDC_PLAY_AUDIO;
- return nslots;
- }
-
- /*
- * We have to cheat a little here. the packet will eventually be queued
- * with ide_cdrom_packet(), which extracts the drive from cdi->handle.
- * Since this device hasn't been registered with the Uniform layer yet,
- * it can't do this. Same goes for cdi->ops.
- */
- cdi->handle = drive;
- cdi->ops = &ide_cdrom_dops;
-
- if (ide_cdrom_get_capabilities(drive, buf))
- return 0;
-
- if ((buf[8 + 6] & 0x01) == 0)
- drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
- if (buf[8 + 6] & 0x08)
- drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
- if (buf[8 + 3] & 0x01)
- cdi->mask &= ~CDC_CD_R;
- if (buf[8 + 3] & 0x02)
- cdi->mask &= ~(CDC_CD_RW | CDC_RAM);
- if (buf[8 + 2] & 0x38)
- cdi->mask &= ~CDC_DVD;
- if (buf[8 + 3] & 0x20)
- cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
- if (buf[8 + 3] & 0x10)
- cdi->mask &= ~CDC_DVD_R;
- if ((buf[8 + 4] & 0x01) || (drive->atapi_flags & IDE_AFLAG_PLAY_AUDIO_OK))
- cdi->mask &= ~CDC_PLAY_AUDIO;
-
- mechtype = buf[8 + 6] >> 5;
- if (mechtype == mechtype_caddy ||
- mechtype == mechtype_popup ||
- (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE))
- cdi->mask |= CDC_CLOSE_TRAY;
-
- if (cdi->sanyo_slot > 0) {
- cdi->mask &= ~CDC_SELECT_DISC;
- nslots = 3;
- } else if (mechtype == mechtype_individual_changer ||
- mechtype == mechtype_cartridge_changer) {
- nslots = cdrom_number_of_slots(cdi);
- if (nslots > 1)
- cdi->mask &= ~CDC_SELECT_DISC;
- }
-
- ide_cdrom_update_speed(drive, buf);
-
- printk(KERN_INFO PFX "%s: ATAPI", drive->name);
-
- /* don't print speed if the drive reported 0 */
- if (cd->max_speed)
- printk(KERN_CONT " %dX", cd->max_speed);
-
- printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM");
-
- if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
- printk(KERN_CONT " DVD%s%s",
- (cdi->mask & CDC_DVD_R) ? "" : "-R",
- (cdi->mask & CDC_DVD_RAM) ? "" : "/RAM");
-
- if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
- printk(KERN_CONT " CD%s%s",
- (cdi->mask & CDC_CD_R) ? "" : "-R",
- (cdi->mask & CDC_CD_RW) ? "" : "/RW");
-
- if ((cdi->mask & CDC_SELECT_DISC) == 0)
- printk(KERN_CONT " changer w/%d slots", nslots);
- else
- printk(KERN_CONT " drive");
-
- printk(KERN_CONT ", %dkB Cache\n",
- be16_to_cpup((__be16 *)&buf[8 + 12]));
-
- return nslots;
-}
-
-struct cd_list_entry {
- const char *id_model;
- const char *id_firmware;
- unsigned int cd_flags;
-};
-
-#ifdef CONFIG_IDE_PROC_FS
-static sector_t ide_cdrom_capacity(ide_drive_t *drive)
-{
- unsigned long capacity, sectors_per_frame;
-
- if (cdrom_read_capacity(drive, &capacity, §ors_per_frame))
- return 0;
-
- return capacity * sectors_per_frame;
-}
-
-static int idecd_capacity_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t *drive = m->private;
-
- seq_printf(m, "%llu\n", (long long)ide_cdrom_capacity(drive));
- return 0;
-}
-
-static ide_proc_entry_t idecd_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, idecd_capacity_proc_show },
- {}
-};
-
-static ide_proc_entry_t *ide_cd_proc_entries(ide_drive_t *drive)
-{
- return idecd_proc;
-}
-
-static const struct ide_proc_devset *ide_cd_proc_devsets(ide_drive_t *drive)
-{
- return NULL;
-}
-#endif
-
-static const struct cd_list_entry ide_cd_quirks_list[] = {
- /* SCR-3231 doesn't support the SET_CD_SPEED command. */
- { "SAMSUNG CD-ROM SCR-3231", NULL, IDE_AFLAG_NO_SPEED_SELECT },
- /* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
- { "NEC CD-ROM DRIVE:260", "1.01", IDE_AFLAG_TOCADDR_AS_BCD |
- IDE_AFLAG_PRE_ATAPI12, },
- /* Vertos 300, some versions of this drive like to talk BCD. */
- { "V003S0DS", NULL, IDE_AFLAG_VERTOS_300_SSD, },
- /* Vertos 600 ESD. */
- { "V006E0DS", NULL, IDE_AFLAG_VERTOS_600_ESD, },
- /*
- * Sanyo 3 CD changer uses a non-standard command for CD changing
- * (by default standard ATAPI support for CD changers is used).
- */
- { "CD-ROM CDR-C3 G", NULL, IDE_AFLAG_SANYO_3CD },
- { "CD-ROM CDR-C3G", NULL, IDE_AFLAG_SANYO_3CD },
- { "CD-ROM CDR_C36", NULL, IDE_AFLAG_SANYO_3CD },
- /* Stingray 8X CD-ROM. */
- { "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_AFLAG_PRE_ATAPI12 },
- /*
- * ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
- * mode sense page capabilities size, but older drives break.
- */
- { "ATAPI CD ROM DRIVE 50X MAX", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
- { "WPI CDS-32X", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
- /* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
- { "", "241N", IDE_AFLAG_LE_SPEED_FIELDS },
- /*
- * Some drives used by Apple don't advertise audio play
- * but they do support reading TOC & audio datas.
- */
- { "MATSHITADVD-ROM SR-8187", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
- { "MATSHITADVD-ROM SR-8186", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
- { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
- { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
- { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
- { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
- { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE },
- { "TEAC CD-ROM CD-224E", NULL, IDE_AFLAG_NO_AUTOCLOSE },
- { NULL, NULL, 0 }
-};
-
-static unsigned int ide_cd_flags(u16 *id)
-{
- const struct cd_list_entry *cle = ide_cd_quirks_list;
-
- while (cle->id_model) {
- if (strcmp(cle->id_model, (char *)&id[ATA_ID_PROD]) == 0 &&
- (cle->id_firmware == NULL ||
- strstr((char *)&id[ATA_ID_FW_REV], cle->id_firmware)))
- return cle->cd_flags;
- cle++;
- }
-
- return 0;
-}
-
-static int ide_cdrom_setup(ide_drive_t *drive)
-{
- struct cdrom_info *cd = drive->driver_data;
- struct cdrom_device_info *cdi = &cd->devinfo;
- struct request_queue *q = drive->queue;
- u16 *id = drive->id;
- char *fw_rev = (char *)&id[ATA_ID_FW_REV];
- int nslots;
-
- ide_debug_log(IDE_DBG_PROBE, "enter");
-
- drive->prep_rq = ide_cdrom_prep_rq;
- blk_queue_dma_alignment(q, 31);
- blk_queue_update_dma_pad(q, 15);
-
- drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
- drive->atapi_flags = IDE_AFLAG_NO_EJECT | ide_cd_flags(id);
-
- if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
- fw_rev[4] == '1' && fw_rev[6] <= '2')
- drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
- IDE_AFLAG_TOCADDR_AS_BCD);
- else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) &&
- fw_rev[4] == '1' && fw_rev[6] <= '2')
- drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD;
- else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD)
- /* 3 => use CD in slot 0 */
- cdi->sanyo_slot = 3;
-
- nslots = ide_cdrom_probe_capabilities(drive);
-
- blk_queue_logical_block_size(q, CD_FRAMESIZE);
-
- if (ide_cdrom_register(drive, nslots)) {
- printk(KERN_ERR PFX "%s: %s failed to register device with the"
- " cdrom driver.\n", drive->name, __func__);
- cd->devinfo.handle = NULL;
- return 1;
- }
-
- ide_proc_register_driver(drive, cd->driver);
- return 0;
-}
-
-static void ide_cd_remove(ide_drive_t *drive)
-{
- struct cdrom_info *info = drive->driver_data;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- ide_proc_unregister_driver(drive, info->driver);
- device_del(&info->dev);
- del_gendisk(info->disk);
-
- mutex_lock(&idecd_ref_mutex);
- put_device(&info->dev);
- mutex_unlock(&idecd_ref_mutex);
-}
-
-static void ide_cd_release(struct device *dev)
-{
- struct cdrom_info *info = to_ide_drv(dev, cdrom_info);
- struct cdrom_device_info *devinfo = &info->devinfo;
- ide_drive_t *drive = info->drive;
- struct gendisk *g = info->disk;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- kfree(info->toc);
- if (devinfo->handle == drive)
- unregister_cdrom(devinfo);
- drive->driver_data = NULL;
- drive->prep_rq = NULL;
- g->private_data = NULL;
- put_disk(g);
- kfree(info);
-}
-
-static int ide_cd_probe(ide_drive_t *);
-
-static struct ide_driver ide_cdrom_driver = {
- .gen_driver = {
- .owner = THIS_MODULE,
- .name = "ide-cdrom",
- .bus = &ide_bus_type,
- },
- .probe = ide_cd_probe,
- .remove = ide_cd_remove,
- .version = IDECD_VERSION,
- .do_request = ide_cd_do_request,
-#ifdef CONFIG_IDE_PROC_FS
- .proc_entries = ide_cd_proc_entries,
- .proc_devsets = ide_cd_proc_devsets,
-#endif
-};
-
-static int idecd_open(struct block_device *bdev, fmode_t mode)
-{
- struct cdrom_info *info;
- int rc = -ENXIO;
-
- if (bdev_check_media_change(bdev)) {
- info = ide_drv_g(bdev->bd_disk, cdrom_info);
-
- ide_cd_read_toc(info->drive);
- }
-
- mutex_lock(&ide_cd_mutex);
- info = ide_cd_get(bdev->bd_disk);
- if (!info)
- goto out;
-
- rc = cdrom_open(&info->devinfo, bdev, mode);
- if (rc < 0)
- ide_cd_put(info);
-out:
- mutex_unlock(&ide_cd_mutex);
- return rc;
-}
-
-static void idecd_release(struct gendisk *disk, fmode_t mode)
-{
- struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
-
- mutex_lock(&ide_cd_mutex);
- cdrom_release(&info->devinfo, mode);
-
- ide_cd_put(info);
- mutex_unlock(&ide_cd_mutex);
-}
-
-static int idecd_set_spindown(struct cdrom_device_info *cdi, unsigned long arg)
-{
- struct packet_command cgc;
- char buffer[16];
- int stat;
- char spindown;
-
- if (copy_from_user(&spindown, (void __user *)arg, sizeof(char)))
- return -EFAULT;
-
- init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
-
- stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
- if (stat)
- return stat;
-
- buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
- return cdrom_mode_select(cdi, &cgc);
-}
-
-static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg)
-{
- struct packet_command cgc;
- char buffer[16];
- int stat;
- char spindown;
-
- init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
-
- stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
- if (stat)
- return stat;
-
- spindown = buffer[11] & 0x0f;
- if (copy_to_user((void __user *)arg, &spindown, sizeof(char)))
- return -EFAULT;
- return 0;
-}
-
-static int idecd_locked_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
- int err;
-
- switch (cmd) {
- case CDROMSETSPINDOWN:
- return idecd_set_spindown(&info->devinfo, arg);
- case CDROMGETSPINDOWN:
- return idecd_get_spindown(&info->devinfo, arg);
- default:
- break;
- }
-
- err = generic_ide_ioctl(info->drive, bdev, cmd, arg);
- if (err == -EINVAL)
- err = cdrom_ioctl(&info->devinfo, bdev, mode, cmd, arg);
-
- return err;
-}
-
-static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- int ret;
-
- mutex_lock(&ide_cd_mutex);
- ret = idecd_locked_ioctl(bdev, mode, cmd, arg);
- mutex_unlock(&ide_cd_mutex);
-
- return ret;
-}
-
-static int idecd_locked_compat_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
- void __user *argp = compat_ptr(arg);
- int err;
-
- switch (cmd) {
- case CDROMSETSPINDOWN:
- return idecd_set_spindown(&info->devinfo, (unsigned long)argp);
- case CDROMGETSPINDOWN:
- return idecd_get_spindown(&info->devinfo, (unsigned long)argp);
- default:
- break;
- }
-
- err = generic_ide_ioctl(info->drive, bdev, cmd, arg);
- if (err == -EINVAL)
- err = cdrom_ioctl(&info->devinfo, bdev, mode, cmd,
- (unsigned long)argp);
-
- return err;
-}
-
-static int idecd_compat_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- int ret;
-
- mutex_lock(&ide_cd_mutex);
- ret = idecd_locked_compat_ioctl(bdev, mode, cmd, arg);
- mutex_unlock(&ide_cd_mutex);
-
- return ret;
-}
-
-static unsigned int idecd_check_events(struct gendisk *disk,
- unsigned int clearing)
-{
- struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
- return cdrom_check_events(&info->devinfo, clearing);
-}
-
-static const struct block_device_operations idecd_ops = {
- .owner = THIS_MODULE,
- .open = idecd_open,
- .release = idecd_release,
- .ioctl = idecd_ioctl,
- .compat_ioctl = IS_ENABLED(CONFIG_COMPAT) ?
- idecd_compat_ioctl : NULL,
- .check_events = idecd_check_events,
-};
-
-/* module options */
-static unsigned long debug_mask;
-module_param(debug_mask, ulong, 0644);
-
-MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
-
-static int ide_cd_probe(ide_drive_t *drive)
-{
- struct cdrom_info *info;
- struct gendisk *g;
-
- ide_debug_log(IDE_DBG_PROBE, "driver_req: %s, media: 0x%x",
- drive->driver_req, drive->media);
-
- if (!strstr("ide-cdrom", drive->driver_req))
- goto failed;
-
- if (drive->media != ide_cdrom && drive->media != ide_optical)
- goto failed;
-
- drive->debug_mask = debug_mask;
- drive->irq_handler = cdrom_newpc_intr;
-
- info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
- if (info == NULL) {
- printk(KERN_ERR PFX "%s: Can't allocate a cdrom structure\n",
- drive->name);
- goto failed;
- }
-
- g = alloc_disk(1 << PARTN_BITS);
- if (!g)
- goto out_free_cd;
-
- ide_init_disk(g, drive);
-
- info->dev.parent = &drive->gendev;
- info->dev.release = ide_cd_release;
- dev_set_name(&info->dev, "%s", dev_name(&drive->gendev));
-
- if (device_register(&info->dev))
- goto out_free_disk;
-
- info->drive = drive;
- info->driver = &ide_cdrom_driver;
- info->disk = g;
-
- g->private_data = &info->driver;
-
- drive->driver_data = info;
-
- g->minors = 1;
- g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
- if (ide_cdrom_setup(drive)) {
- put_device(&info->dev);
- goto failed;
- }
-
- ide_cd_read_toc(drive);
- g->fops = &idecd_ops;
- g->flags |= GENHD_FL_REMOVABLE | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE;
- g->events = DISK_EVENT_MEDIA_CHANGE;
- device_add_disk(&drive->gendev, g, NULL);
- return 0;
-
-out_free_disk:
- put_disk(g);
-out_free_cd:
- kfree(info);
-failed:
- return -ENODEV;
-}
-
-static void __exit ide_cdrom_exit(void)
-{
- driver_unregister(&ide_cdrom_driver.gen_driver);
-}
-
-static int __init ide_cdrom_init(void)
-{
- printk(KERN_INFO DRV_NAME " driver " IDECD_VERSION "\n");
- return driver_register(&ide_cdrom_driver.gen_driver);
-}
-
-MODULE_ALIAS("ide:*m-cdrom*");
-MODULE_ALIAS("ide-cd");
-module_init(ide_cdrom_init);
-module_exit(ide_cdrom_exit);
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
deleted file mode 100644
index a69dc7f61c4d..000000000000
--- a/drivers/ide/ide-cd.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1996-98 Erik Andersen
- * Copyright (C) 1998-2000 Jens Axboe
- */
-#ifndef _IDE_CD_H
-#define _IDE_CD_H
-
-#include <linux/cdrom.h>
-#include <asm/byteorder.h>
-
-#define IDECD_DEBUG_LOG 0
-
-#if IDECD_DEBUG_LOG
-#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
-#else
-#define ide_debug_log(lvl, fmt, args...) do {} while (0)
-#endif
-
-#define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
-
-/************************************************************************/
-
-#define SECTORS_PER_FRAME (CD_FRAMESIZE >> SECTOR_SHIFT)
-#define SECTOR_BUFFER_SIZE (CD_FRAMESIZE * 32)
-
-/* Capabilities Page size including 8 bytes of Mode Page Header */
-#define ATAPI_CAPABILITIES_PAGE_SIZE (8 + 20)
-#define ATAPI_CAPABILITIES_PAGE_PAD_SIZE 4
-
-/* Structure of a MSF cdrom address. */
-struct atapi_msf {
- u8 reserved;
- u8 minute;
- u8 second;
- u8 frame;
-};
-
-/* Space to hold the disk TOC. */
-#define MAX_TRACKS 99
-struct atapi_toc_header {
- unsigned short toc_length;
- u8 first_track;
- u8 last_track;
-};
-
-struct atapi_toc_entry {
- u8 reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
- u8 adr : 4;
- u8 control : 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- u8 control : 4;
- u8 adr : 4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- u8 track;
- u8 reserved2;
- union {
- unsigned lba;
- struct atapi_msf msf;
- } addr;
-};
-
-struct atapi_toc {
- int last_session_lba;
- int xa_flag;
- unsigned long capacity;
- struct atapi_toc_header hdr;
- struct atapi_toc_entry ent[MAX_TRACKS+1];
- /* One extra for the leadout. */
-};
-
-/* Extra per-device info for cdrom drives. */
-struct cdrom_info {
- ide_drive_t *drive;
- struct ide_driver *driver;
- struct gendisk *disk;
- struct device dev;
-
- /* Buffer for table of contents. NULL if we haven't allocated
- a TOC buffer for this device yet. */
-
- struct atapi_toc *toc;
-
- u8 max_speed; /* Max speed of the drive. */
- u8 current_speed; /* Current speed of the drive. */
-
- /* Per-device info needed by cdrom.c generic driver. */
- struct cdrom_device_info devinfo;
-
- unsigned long write_timeout;
-};
-
-/* ide-cd_verbose.c */
-void ide_cd_log_error(const char *, struct request *, struct request_sense *);
-
-/* ide-cd.c functions used by ide-cd_ioctl.c */
-int ide_cd_queue_pc(ide_drive_t *, const unsigned char *, int, void *,
- unsigned *, struct scsi_sense_hdr *, int, req_flags_t);
-int ide_cd_read_toc(ide_drive_t *);
-int ide_cdrom_get_capabilities(ide_drive_t *, u8 *);
-void ide_cdrom_update_speed(ide_drive_t *, u8 *);
-int cdrom_check_status(ide_drive_t *, struct scsi_sense_hdr *);
-
-/* ide-cd_ioctl.c */
-int ide_cdrom_open_real(struct cdrom_device_info *, int);
-void ide_cdrom_release_real(struct cdrom_device_info *);
-int ide_cdrom_drive_status(struct cdrom_device_info *, int);
-unsigned int ide_cdrom_check_events_real(struct cdrom_device_info *,
- unsigned int clearing, int slot_nr);
-int ide_cdrom_tray_move(struct cdrom_device_info *, int);
-int ide_cdrom_lock_door(struct cdrom_device_info *, int);
-int ide_cdrom_select_speed(struct cdrom_device_info *, int);
-int ide_cdrom_get_last_session(struct cdrom_device_info *,
- struct cdrom_multisession *);
-int ide_cdrom_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *);
-int ide_cdrom_reset(struct cdrom_device_info *cdi);
-int ide_cdrom_audio_ioctl(struct cdrom_device_info *, unsigned int, void *);
-int ide_cdrom_packet(struct cdrom_device_info *, struct packet_command *);
-
-#endif /* _IDE_CD_H */
diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c
deleted file mode 100644
index 011eab9c69b7..000000000000
--- a/drivers/ide/ide-cd_ioctl.c
+++ /dev/null
@@ -1,468 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * cdrom.c IOCTLs handling for ide-cd driver.
- *
- * Copyright (C) 1994-1996 Scott Snyder <snyder@...ld0.fnal.gov>
- * Copyright (C) 1996-1998 Erik Andersen <andersee@...ian.org>
- * Copyright (C) 1998-2000 Jens Axboe <axboe@...e.de>
- */
-
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/gfp.h>
-#include <linux/ide.h>
-#include <scsi/scsi.h>
-
-#include "ide-cd.h"
-
-/****************************************************************************
- * Other driver requests (open, close, check media change).
- */
-int ide_cdrom_open_real(struct cdrom_device_info *cdi, int purpose)
-{
- return 0;
-}
-
-/*
- * Close down the device. Invalidate all cached blocks.
- */
-void ide_cdrom_release_real(struct cdrom_device_info *cdi)
-{
- ide_drive_t *drive = cdi->handle;
-
- if (!cdi->use_count)
- drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
-}
-
-/*
- * add logic to try GET_EVENT command first to check for media and tray
- * status. this should be supported by newer cd-r/w and all DVD etc
- * drives
- */
-int ide_cdrom_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
- ide_drive_t *drive = cdi->handle;
- struct media_event_desc med;
- struct scsi_sense_hdr sshdr;
- int stat;
-
- if (slot_nr != CDSL_CURRENT)
- return -EINVAL;
-
- stat = cdrom_check_status(drive, &sshdr);
- if (!stat || sshdr.sense_key == UNIT_ATTENTION)
- return CDS_DISC_OK;
-
- if (!cdrom_get_media_event(cdi, &med)) {
- if (med.media_present)
- return CDS_DISC_OK;
- else if (med.door_open)
- return CDS_TRAY_OPEN;
- else
- return CDS_NO_DISC;
- }
-
- if (sshdr.sense_key == NOT_READY && sshdr.asc == 0x04
- && sshdr.ascq == 0x04)
- return CDS_DISC_OK;
-
- /*
- * If not using Mt Fuji extended media tray reports,
- * just return TRAY_OPEN since ATAPI doesn't provide
- * any other way to detect this...
- */
- if (sshdr.sense_key == NOT_READY) {
- if (sshdr.asc == 0x3a && sshdr.ascq == 1)
- return CDS_NO_DISC;
- else
- return CDS_TRAY_OPEN;
- }
- return CDS_DRIVE_NOT_READY;
-}
-
-/*
- * ide-cd always generates media changed event if media is missing, which
- * makes it impossible to use for proper event reporting, so
- * DISK_EVENT_FLAG_UEVENT is cleared in disk->event_flags
- * and the following function is used only to trigger
- * revalidation and never propagated to userland.
- */
-unsigned int ide_cdrom_check_events_real(struct cdrom_device_info *cdi,
- unsigned int clearing, int slot_nr)
-{
- ide_drive_t *drive = cdi->handle;
- int retval;
-
- if (slot_nr == CDSL_CURRENT) {
- (void) cdrom_check_status(drive, NULL);
- retval = (drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED) ? 1 : 0;
- drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED;
- return retval ? DISK_EVENT_MEDIA_CHANGE : 0;
- } else {
- return 0;
- }
-}
-
-/* Eject the disk if EJECTFLAG is 0.
- If EJECTFLAG is 1, try to reload the disk. */
-static
-int cdrom_eject(ide_drive_t *drive, int ejectflag)
-{
- struct cdrom_info *cd = drive->driver_data;
- struct cdrom_device_info *cdi = &cd->devinfo;
- char loej = 0x02;
- unsigned char cmd[BLK_MAX_CDB];
-
- if ((drive->atapi_flags & IDE_AFLAG_NO_EJECT) && !ejectflag)
- return -EDRIVE_CANT_DO_THIS;
-
- /* reload fails on some drives, if the tray is locked */
- if ((drive->atapi_flags & IDE_AFLAG_DOOR_LOCKED) && ejectflag)
- return 0;
-
- /* only tell drive to close tray if open, if it can do that */
- if (ejectflag && (cdi->mask & CDC_CLOSE_TRAY))
- loej = 0;
-
- memset(cmd, 0, BLK_MAX_CDB);
-
- cmd[0] = GPCMD_START_STOP_UNIT;
- cmd[4] = loej | (ejectflag != 0);
-
- return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, NULL, 0, 0);
-}
-
-/* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
-static
-int ide_cd_lockdoor(ide_drive_t *drive, int lockflag)
-{
- struct scsi_sense_hdr sshdr;
- int stat;
-
- /* If the drive cannot lock the door, just pretend. */
- if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) {
- stat = 0;
- } else {
- unsigned char cmd[BLK_MAX_CDB];
-
- memset(cmd, 0, BLK_MAX_CDB);
-
- cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
- cmd[4] = lockflag ? 1 : 0;
-
- stat = ide_cd_queue_pc(drive, cmd, 0, NULL, NULL,
- &sshdr, 0, 0);
- }
-
- /* If we got an illegal field error, the drive
- probably cannot lock the door. */
- if (stat != 0 &&
- sshdr.sense_key == ILLEGAL_REQUEST &&
- (sshdr.asc == 0x24 || sshdr.asc == 0x20)) {
- printk(KERN_ERR "%s: door locking not supported\n",
- drive->name);
- drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
- stat = 0;
- }
-
- /* no medium, that's alright. */
- if (stat != 0 && sshdr.sense_key == NOT_READY && sshdr.asc == 0x3a)
- stat = 0;
-
- if (stat == 0) {
- if (lockflag)
- drive->atapi_flags |= IDE_AFLAG_DOOR_LOCKED;
- else
- drive->atapi_flags &= ~IDE_AFLAG_DOOR_LOCKED;
- }
-
- return stat;
-}
-
-int ide_cdrom_tray_move(struct cdrom_device_info *cdi, int position)
-{
- ide_drive_t *drive = cdi->handle;
-
- if (position) {
- int stat = ide_cd_lockdoor(drive, 0);
-
- if (stat)
- return stat;
- }
-
- return cdrom_eject(drive, !position);
-}
-
-int ide_cdrom_lock_door(struct cdrom_device_info *cdi, int lock)
-{
- ide_drive_t *drive = cdi->handle;
-
- return ide_cd_lockdoor(drive, lock);
-}
-
-/*
- * ATAPI devices are free to select the speed you request or any slower
- * rate. :-( Requesting too fast a speed will _not_ produce an error.
- */
-int ide_cdrom_select_speed(struct cdrom_device_info *cdi, int speed)
-{
- ide_drive_t *drive = cdi->handle;
- struct cdrom_info *cd = drive->driver_data;
- u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
- int stat;
- unsigned char cmd[BLK_MAX_CDB];
-
- if (speed == 0)
- speed = 0xffff; /* set to max */
- else
- speed *= 177; /* Nx to kbytes/s */
-
- memset(cmd, 0, BLK_MAX_CDB);
-
- cmd[0] = GPCMD_SET_SPEED;
- /* Read Drive speed in kbytes/second MSB/LSB */
- cmd[2] = (speed >> 8) & 0xff;
- cmd[3] = speed & 0xff;
- if ((cdi->mask & (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) !=
- (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) {
- /* Write Drive speed in kbytes/second MSB/LSB */
- cmd[4] = (speed >> 8) & 0xff;
- cmd[5] = speed & 0xff;
- }
-
- stat = ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, NULL, 0, 0);
-
- if (!ide_cdrom_get_capabilities(drive, buf)) {
- ide_cdrom_update_speed(drive, buf);
- cdi->speed = cd->current_speed;
- }
-
- return 0;
-}
-
-int ide_cdrom_get_last_session(struct cdrom_device_info *cdi,
- struct cdrom_multisession *ms_info)
-{
- struct atapi_toc *toc;
- ide_drive_t *drive = cdi->handle;
- struct cdrom_info *info = drive->driver_data;
- int ret;
-
- if ((drive->atapi_flags & IDE_AFLAG_TOC_VALID) == 0 || !info->toc) {
- ret = ide_cd_read_toc(drive);
- if (ret)
- return ret;
- }
-
- toc = info->toc;
- ms_info->addr.lba = toc->last_session_lba;
- ms_info->xa_flag = toc->xa_flag;
-
- return 0;
-}
-
-int ide_cdrom_get_mcn(struct cdrom_device_info *cdi,
- struct cdrom_mcn *mcn_info)
-{
- ide_drive_t *drive = cdi->handle;
- int stat, mcnlen;
- char buf[24];
- unsigned char cmd[BLK_MAX_CDB];
- unsigned len = sizeof(buf);
-
- memset(cmd, 0, BLK_MAX_CDB);
-
- cmd[0] = GPCMD_READ_SUBCHANNEL;
- cmd[1] = 2; /* MSF addressing */
- cmd[2] = 0x40; /* request subQ data */
- cmd[3] = 2; /* format */
- cmd[8] = len;
-
- stat = ide_cd_queue_pc(drive, cmd, 0, buf, &len, NULL, 0, 0);
- if (stat)
- return stat;
-
- mcnlen = sizeof(mcn_info->medium_catalog_number) - 1;
- memcpy(mcn_info->medium_catalog_number, buf + 9, mcnlen);
- mcn_info->medium_catalog_number[mcnlen] = '\0';
-
- return 0;
-}
-
-int ide_cdrom_reset(struct cdrom_device_info *cdi)
-{
- ide_drive_t *drive = cdi->handle;
- struct cdrom_info *cd = drive->driver_data;
- struct request *rq;
- int ret;
-
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_MISC;
- rq->rq_flags = RQF_QUIET;
- blk_execute_rq(cd->disk, rq, 0);
- ret = scsi_req(rq)->result ? -EIO : 0;
- blk_put_request(rq);
- /*
- * A reset will unlock the door. If it was previously locked,
- * lock it again.
- */
- if (drive->atapi_flags & IDE_AFLAG_DOOR_LOCKED)
- (void)ide_cd_lockdoor(drive, 1);
-
- return ret;
-}
-
-static int ide_cd_get_toc_entry(ide_drive_t *drive, int track,
- struct atapi_toc_entry **ent)
-{
- struct cdrom_info *info = drive->driver_data;
- struct atapi_toc *toc = info->toc;
- int ntracks;
-
- /*
- * don't serve cached data, if the toc isn't valid
- */
- if ((drive->atapi_flags & IDE_AFLAG_TOC_VALID) == 0)
- return -EINVAL;
-
- /* Check validity of requested track number. */
- ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
-
- if (toc->hdr.first_track == CDROM_LEADOUT)
- ntracks = 0;
-
- if (track == CDROM_LEADOUT)
- *ent = &toc->ent[ntracks];
- else if (track < toc->hdr.first_track || track > toc->hdr.last_track)
- return -EINVAL;
- else
- *ent = &toc->ent[track - toc->hdr.first_track];
-
- return 0;
-}
-
-static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg)
-{
- struct cdrom_ti *ti = arg;
- struct atapi_toc_entry *first_toc, *last_toc;
- unsigned long lba_start, lba_end;
- int stat;
- unsigned char cmd[BLK_MAX_CDB];
-
- stat = ide_cd_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
- if (stat)
- return stat;
-
- stat = ide_cd_get_toc_entry(drive, ti->cdti_trk1, &last_toc);
- if (stat)
- return stat;
-
- if (ti->cdti_trk1 != CDROM_LEADOUT)
- ++last_toc;
- lba_start = first_toc->addr.lba;
- lba_end = last_toc->addr.lba;
-
- if (lba_end <= lba_start)
- return -EINVAL;
-
- memset(cmd, 0, BLK_MAX_CDB);
-
- cmd[0] = GPCMD_PLAY_AUDIO_MSF;
- lba_to_msf(lba_start, &cmd[3], &cmd[4], &cmd[5]);
- lba_to_msf(lba_end - 1, &cmd[6], &cmd[7], &cmd[8]);
-
- return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, NULL, 0, 0);
-}
-
-static int ide_cd_read_tochdr(ide_drive_t *drive, void *arg)
-{
- struct cdrom_info *cd = drive->driver_data;
- struct cdrom_tochdr *tochdr = arg;
- struct atapi_toc *toc;
- int stat;
-
- /* Make sure our saved TOC is valid. */
- stat = ide_cd_read_toc(drive);
- if (stat)
- return stat;
-
- toc = cd->toc;
- tochdr->cdth_trk0 = toc->hdr.first_track;
- tochdr->cdth_trk1 = toc->hdr.last_track;
-
- return 0;
-}
-
-static int ide_cd_read_tocentry(ide_drive_t *drive, void *arg)
-{
- struct cdrom_tocentry *tocentry = arg;
- struct atapi_toc_entry *toce;
- int stat;
-
- stat = ide_cd_get_toc_entry(drive, tocentry->cdte_track, &toce);
- if (stat)
- return stat;
-
- tocentry->cdte_ctrl = toce->control;
- tocentry->cdte_adr = toce->adr;
- if (tocentry->cdte_format == CDROM_MSF) {
- lba_to_msf(toce->addr.lba,
- &tocentry->cdte_addr.msf.minute,
- &tocentry->cdte_addr.msf.second,
- &tocentry->cdte_addr.msf.frame);
- } else
- tocentry->cdte_addr.lba = toce->addr.lba;
-
- return 0;
-}
-
-int ide_cdrom_audio_ioctl(struct cdrom_device_info *cdi,
- unsigned int cmd, void *arg)
-{
- ide_drive_t *drive = cdi->handle;
-
- switch (cmd) {
- /*
- * emulate PLAY_AUDIO_TI command with PLAY_AUDIO_10, since
- * atapi doesn't support it
- */
- case CDROMPLAYTRKIND:
- return ide_cd_fake_play_trkind(drive, arg);
- case CDROMREADTOCHDR:
- return ide_cd_read_tochdr(drive, arg);
- case CDROMREADTOCENTRY:
- return ide_cd_read_tocentry(drive, arg);
- default:
- return -EINVAL;
- }
-}
-
-/* the generic packet interface to cdrom.c */
-int ide_cdrom_packet(struct cdrom_device_info *cdi,
- struct packet_command *cgc)
-{
- ide_drive_t *drive = cdi->handle;
- req_flags_t flags = 0;
- unsigned len = cgc->buflen;
-
- if (cgc->timeout <= 0)
- cgc->timeout = ATAPI_WAIT_PC;
-
- /* here we queue the commands from the uniform CD-ROM
- layer. the packet must be complete, as we do not
- touch it at all. */
-
- if (cgc->sshdr)
- memset(cgc->sshdr, 0, sizeof(*cgc->sshdr));
-
- if (cgc->quiet)
- flags |= RQF_QUIET;
-
- cgc->stat = ide_cd_queue_pc(drive, cgc->cmd,
- cgc->data_direction == CGC_DATA_WRITE,
- cgc->buffer, &len,
- cgc->sshdr, cgc->timeout, flags);
- if (!cgc->stat)
- cgc->buflen -= len;
- return cgc->stat;
-}
diff --git a/drivers/ide/ide-cd_verbose.c b/drivers/ide/ide-cd_verbose.c
deleted file mode 100644
index 5ecd5b2f03a3..000000000000
--- a/drivers/ide/ide-cd_verbose.c
+++ /dev/null
@@ -1,362 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Verbose error logging for ATAPI CD/DVD devices.
- *
- * Copyright (C) 1994-1996 Scott Snyder <snyder@...ld0.fnal.gov>
- * Copyright (C) 1996-1998 Erik Andersen <andersee@...ian.org>
- * Copyright (C) 1998-2000 Jens Axboe <axboe@...e.de>
- */
-
-#include <linux/kernel.h>
-#include <linux/blkdev.h>
-#include <linux/cdrom.h>
-#include <linux/ide.h>
-#include <scsi/scsi.h>
-#include "ide-cd.h"
-
-#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS
-void ide_cd_log_error(const char *name, struct request *failed_command,
- struct request_sense *sense)
-{
- /* Suppress printing unit attention and `in progress of becoming ready'
- errors when we're not being verbose. */
- if (sense->sense_key == UNIT_ATTENTION ||
- (sense->sense_key == NOT_READY && (sense->asc == 4 ||
- sense->asc == 0x3a)))
- return;
-
- printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x "
- "asc: 0x%02x ascq: 0x%02x\n",
- name, sense->error_code, sense->sense_key,
- sense->asc, sense->ascq);
-}
-#else
-/* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned short packet_command;
- const char * const text;
-} packet_command_texts[] = {
- { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
- { GPCMD_REQUEST_SENSE, "Request Sense" },
- { GPCMD_FORMAT_UNIT, "Format Unit" },
- { GPCMD_INQUIRY, "Inquiry" },
- { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
- { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
- { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
- { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
- { GPCMD_READ_10, "Read 10" },
- { GPCMD_WRITE_10, "Write 10" },
- { GPCMD_SEEK, "Seek" },
- { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
- { GPCMD_VERIFY_10, "Verify 10" },
- { GPCMD_FLUSH_CACHE, "Flush Cache" },
- { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
- { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
- { GPCMD_READ_HEADER, "Read Header" },
- { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
- { GPCMD_GET_CONFIGURATION, "Get Configuration" },
- { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
- { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
- { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
- "Get Event Status Notification" },
- { GPCMD_PAUSE_RESUME, "Pause/Resume" },
- { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
- { GPCMD_READ_DISC_INFO, "Read Disc Info" },
- { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
- { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
- { GPCMD_SEND_OPC, "Send OPC" },
- { GPCMD_MODE_SELECT_10, "Mode Select 10" },
- { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
- { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
- { GPCMD_CLOSE_TRACK, "Close Track" },
- { GPCMD_BLANK, "Blank" },
- { GPCMD_SEND_EVENT, "Send Event" },
- { GPCMD_SEND_KEY, "Send Key" },
- { GPCMD_REPORT_KEY, "Report Key" },
- { GPCMD_LOAD_UNLOAD, "Load/Unload" },
- { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
- { GPCMD_READ_12, "Read 12" },
- { GPCMD_GET_PERFORMANCE, "Get Performance" },
- { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
- { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
- { GPCMD_SET_STREAMING, "Set Streaming" },
- { GPCMD_READ_CD_MSF, "Read CD MSF" },
- { GPCMD_SCAN, "Scan" },
- { GPCMD_SET_SPEED, "Set Speed" },
- { GPCMD_PLAY_CD, "Play CD" },
- { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
- { GPCMD_READ_CD, "Read CD" },
-};
-
-/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const char * const sense_key_texts[16] = {
- "No sense data",
- "Recovered error",
- "Not ready",
- "Medium error",
- "Hardware error",
- "Illegal request",
- "Unit attention",
- "Data protect",
- "Blank check",
- "(reserved)",
- "(reserved)",
- "Aborted command",
- "(reserved)",
- "(reserved)",
- "Miscompare",
- "(reserved)",
-};
-
-/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
- unsigned long asc_ascq;
- const char * const text;
-} sense_data_texts[] = {
- { 0x000000, "No additional sense information" },
- { 0x000011, "Play operation in progress" },
- { 0x000012, "Play operation paused" },
- { 0x000013, "Play operation successfully completed" },
- { 0x000014, "Play operation stopped due to error" },
- { 0x000015, "No current audio status to return" },
- { 0x010c0a, "Write error - padding blocks added" },
- { 0x011700, "Recovered data with no error correction applied" },
- { 0x011701, "Recovered data with retries" },
- { 0x011702, "Recovered data with positive head offset" },
- { 0x011703, "Recovered data with negative head offset" },
- { 0x011704, "Recovered data with retries and/or CIRC applied" },
- { 0x011705, "Recovered data using previous sector ID" },
- { 0x011800, "Recovered data with error correction applied" },
- { 0x011801, "Recovered data with error correction and retries applied"},
- { 0x011802, "Recovered data - the data was auto-reallocated" },
- { 0x011803, "Recovered data with CIRC" },
- { 0x011804, "Recovered data with L-EC" },
- { 0x015d00, "Failure prediction threshold exceeded"
- " - Predicted logical unit failure" },
- { 0x015d01, "Failure prediction threshold exceeded"
- " - Predicted media failure" },
- { 0x015dff, "Failure prediction threshold exceeded - False" },
- { 0x017301, "Power calibration area almost full" },
- { 0x020400, "Logical unit not ready - cause not reportable" },
- /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
- { 0x020401, "Logical unit not ready"
- " - in progress [sic] of becoming ready" },
- { 0x020402, "Logical unit not ready - initializing command required" },
- { 0x020403, "Logical unit not ready - manual intervention required" },
- { 0x020404, "Logical unit not ready - format in progress" },
- { 0x020407, "Logical unit not ready - operation in progress" },
- { 0x020408, "Logical unit not ready - long write in progress" },
- { 0x020600, "No reference position found (media may be upside down)" },
- { 0x023000, "Incompatible medium installed" },
- { 0x023a00, "Medium not present" },
- { 0x025300, "Media load or eject failed" },
- { 0x025700, "Unable to recover table of contents" },
- { 0x030300, "Peripheral device write fault" },
- { 0x030301, "No write current" },
- { 0x030302, "Excessive write errors" },
- { 0x030c00, "Write error" },
- { 0x030c01, "Write error - Recovered with auto reallocation" },
- { 0x030c02, "Write error - auto reallocation failed" },
- { 0x030c03, "Write error - recommend reassignment" },
- { 0x030c04, "Compression check miscompare error" },
- { 0x030c05, "Data expansion occurred during compress" },
- { 0x030c06, "Block not compressible" },
- { 0x030c07, "Write error - recovery needed" },
- { 0x030c08, "Write error - recovery failed" },
- { 0x030c09, "Write error - loss of streaming" },
- { 0x031100, "Unrecovered read error" },
- { 0x031106, "CIRC unrecovered error" },
- { 0x033101, "Format command failed" },
- { 0x033200, "No defect spare location available" },
- { 0x033201, "Defect list update failure" },
- { 0x035100, "Erase failure" },
- { 0x037200, "Session fixation error" },
- { 0x037201, "Session fixation error writin lead-in" },
- { 0x037202, "Session fixation error writin lead-out" },
- { 0x037300, "CD control error" },
- { 0x037302, "Power calibration area is full" },
- { 0x037303, "Power calibration area error" },
- { 0x037304, "Program memory area / RMA update failure" },
- { 0x037305, "Program memory area / RMA is full" },
- { 0x037306, "Program memory area / RMA is (almost) full" },
- { 0x040200, "No seek complete" },
- { 0x040300, "Write fault" },
- { 0x040900, "Track following error" },
- { 0x040901, "Tracking servo failure" },
- { 0x040902, "Focus servo failure" },
- { 0x040903, "Spindle servo failure" },
- { 0x041500, "Random positioning error" },
- { 0x041501, "Mechanical positioning or changer error" },
- { 0x041502, "Positioning error detected by read of medium" },
- { 0x043c00, "Mechanical positioning or changer error" },
- { 0x044000, "Diagnostic failure on component (ASCQ)" },
- { 0x044400, "Internal CD/DVD logical unit failure" },
- { 0x04b600, "Media load mechanism failed" },
- { 0x051a00, "Parameter list length error" },
- { 0x052000, "Invalid command operation code" },
- { 0x052100, "Logical block address out of range" },
- { 0x052102, "Invalid address for write" },
- { 0x052400, "Invalid field in command packet" },
- { 0x052600, "Invalid field in parameter list" },
- { 0x052601, "Parameter not supported" },
- { 0x052602, "Parameter value invalid" },
- { 0x052700, "Write protected media" },
- { 0x052c00, "Command sequence error" },
- { 0x052c03, "Current program area is not empty" },
- { 0x052c04, "Current program area is empty" },
- { 0x053001, "Cannot read medium - unknown format" },
- { 0x053002, "Cannot read medium - incompatible format" },
- { 0x053900, "Saving parameters not supported" },
- { 0x054e00, "Overlapped commands attempted" },
- { 0x055302, "Medium removal prevented" },
- { 0x055500, "System resource failure" },
- { 0x056300, "End of user area encountered on this track" },
- { 0x056400, "Illegal mode for this track or incompatible medium" },
- { 0x056f00, "Copy protection key exchange failure"
- " - Authentication failure" },
- { 0x056f01, "Copy protection key exchange failure - Key not present" },
- { 0x056f02, "Copy protection key exchange failure"
- " - Key not established" },
- { 0x056f03, "Read of scrambled sector without authentication" },
- { 0x056f04, "Media region code is mismatched to logical unit" },
- { 0x056f05, "Drive region must be permanent"
- " / region reset count error" },
- { 0x057203, "Session fixation error - incomplete track in session" },
- { 0x057204, "Empty or partially written reserved track" },
- { 0x057205, "No more RZONE reservations are allowed" },
- { 0x05bf00, "Loss of streaming" },
- { 0x062800, "Not ready to ready transition, medium may have changed" },
- { 0x062900, "Power on, reset or hardware reset occurred" },
- { 0x062a00, "Parameters changed" },
- { 0x062a01, "Mode parameters changed" },
- { 0x062e00, "Insufficient time for operation" },
- { 0x063f00, "Logical unit operating conditions have changed" },
- { 0x063f01, "Microcode has been changed" },
- { 0x065a00, "Operator request or state change input (unspecified)" },
- { 0x065a01, "Operator medium removal request" },
- { 0x0bb900, "Play operation aborted" },
- /* Here we use 0xff for the key (not a valid key) to signify
- * that these can have _any_ key value associated with them... */
- { 0xff0401, "Logical unit is in process of becoming ready" },
- { 0xff0400, "Logical unit not ready, cause not reportable" },
- { 0xff0402, "Logical unit not ready, initializing command required" },
- { 0xff0403, "Logical unit not ready, manual intervention required" },
- { 0xff0500, "Logical unit does not respond to selection" },
- { 0xff0800, "Logical unit communication failure" },
- { 0xff0802, "Logical unit communication parity error" },
- { 0xff0801, "Logical unit communication time-out" },
- { 0xff2500, "Logical unit not supported" },
- { 0xff4c00, "Logical unit failed self-configuration" },
- { 0xff3e00, "Logical unit has not self-configured yet" },
-};
-
-void ide_cd_log_error(const char *name, struct request *failed_command,
- struct request_sense *sense)
-{
- int i;
- const char *s = "bad sense key!";
- char buf[80];
-
- printk(KERN_ERR "ATAPI device %s:\n", name);
- if (sense->error_code == 0x70)
- printk(KERN_CONT " Error: ");
- else if (sense->error_code == 0x71)
- printk(" Deferred Error: ");
- else if (sense->error_code == 0x7f)
- printk(KERN_CONT " Vendor-specific Error: ");
- else
- printk(KERN_CONT " Unknown Error Type: ");
-
- if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
- s = sense_key_texts[sense->sense_key];
-
- printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
-
- if (sense->asc == 0x40) {
- sprintf(buf, "Diagnostic failure on component 0x%02x",
- sense->ascq);
- s = buf;
- } else {
- int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
- unsigned long key = (sense->sense_key << 16);
-
- key |= (sense->asc << 8);
- if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
- key |= sense->ascq;
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (sense_data_texts[mid].asc_ascq == key ||
- sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
- s = sense_data_texts[mid].text;
- break;
- } else if (sense_data_texts[mid].asc_ascq > key)
- hi = mid;
- else
- lo = mid + 1;
- }
- }
-
- if (s == NULL) {
- if (sense->asc > 0x80)
- s = "(vendor-specific error)";
- else
- s = "(reserved error code)";
- }
-
- printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
- s, sense->asc, sense->ascq);
-
- if (failed_command != NULL) {
- int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
- s = NULL;
-
- while (hi > lo) {
- mid = (lo + hi) / 2;
- if (packet_command_texts[mid].packet_command ==
- scsi_req(failed_command)->cmd[0]) {
- s = packet_command_texts[mid].text;
- break;
- }
- if (packet_command_texts[mid].packet_command >
- scsi_req(failed_command)->cmd[0])
- hi = mid;
- else
- lo = mid + 1;
- }
-
- printk(KERN_ERR " The failed \"%s\" packet command "
- "was: \n \"", s);
- for (i = 0; i < BLK_MAX_CDB; i++)
- printk(KERN_CONT "%02x ", scsi_req(failed_command)->cmd[i]);
- printk(KERN_CONT "\"\n");
- }
-
- /* The SKSV bit specifies validity of the sense_key_specific
- * in the next two commands. It is bit 7 of the first byte.
- * In the case of NOT_READY, if SKSV is set the drive can
- * give us nice ETA readings.
- */
- if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
- int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
-
- printk(KERN_ERR " Command is %02d%% complete\n",
- progress / 0xffff);
- }
-
- if (sense->sense_key == ILLEGAL_REQUEST &&
- (sense->sks[0] & 0x80) != 0) {
- printk(KERN_ERR " Error in %s byte %d",
- (sense->sks[0] & 0x40) != 0 ?
- "command packet" : "command data",
- (sense->sks[1] << 8) + sense->sks[2]);
-
- if ((sense->sks[0] & 0x40) != 0)
- printk(KERN_CONT " bit %d", sense->sks[0] & 0x07);
-
- printk(KERN_CONT "\n");
- }
-}
-#endif
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
deleted file mode 100644
index f1e922e2479a..000000000000
--- a/drivers/ide/ide-cs.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*======================================================================
-
- A driver for PCMCIA IDE/ATA disk cards
-
- The contents of this file are subject to the Mozilla Public
- License Version 1.1 (the "License"); you may not use this file
- except in compliance with the License. You may obtain a copy of
- the License at http://www.mozilla.org/MPL/
-
- Software distributed under the License is distributed on an "AS
- IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- implied. See the License for the specific language governing
- rights and limitations under the License.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@...rs.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
- Alternatively, the contents of this file may be used under the
- terms of the GNU General Public License version 2 (the "GPL"), in
- which case the provisions of the GPL are applicable instead of the
- above. If you wish to allow the use of your version of this file
- only under the terms of the GPL and not to allow others to use
- your version of this file under the MPL, indicate your decision
- by deleting the provisions above and replace them with the notice
- and other provisions required by the GPL. If you do not delete
- the provisions above, a recipient may use your version of this
- file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-
-#define DRV_NAME "ide-cs"
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@...rs.sourceforge.net>");
-MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/*====================================================================*/
-
-typedef struct ide_info_t {
- struct pcmcia_device *p_dev;
- struct ide_host *host;
- int ndev;
-} ide_info_t;
-
-static void ide_release(struct pcmcia_device *);
-static int ide_config(struct pcmcia_device *);
-
-static void ide_detach(struct pcmcia_device *p_dev);
-
-static int ide_probe(struct pcmcia_device *link)
-{
- ide_info_t *info;
-
- dev_dbg(&link->dev, "ide_attach()\n");
-
- /* Create new ide device */
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->p_dev = link;
- link->priv = info;
-
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
- CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
-
- return ide_config(link);
-} /* ide_attach */
-
-static void ide_detach(struct pcmcia_device *link)
-{
- ide_info_t *info = link->priv;
-
- dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
-
- ide_release(link);
-
- kfree(info);
-} /* ide_detach */
-
-static const struct ide_port_ops idecs_port_ops = {
- .quirkproc = ide_undecoded_slave,
-};
-
-static const struct ide_port_info idecs_port_info = {
- .port_ops = &idecs_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
- .irq_flags = IRQF_SHARED,
- .chipset = ide_pci,
-};
-
-static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
- unsigned long irq, struct pcmcia_device *handle)
-{
- struct ide_host *host;
- ide_hwif_t *hwif;
- int i, rc;
- struct ide_hw hw, *hws[] = { &hw };
-
- if (!request_region(io, 8, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- DRV_NAME, io, io + 7);
- return NULL;
- }
-
- if (!request_region(ctl, 1, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- DRV_NAME, ctl);
- release_region(io, 8);
- return NULL;
- }
-
- memset(&hw, 0, sizeof(hw));
- ide_std_init_ports(&hw, io, ctl);
- hw.irq = irq;
- hw.dev = &handle->dev;
-
- rc = ide_host_add(&idecs_port_info, hws, 1, &host);
- if (rc)
- goto out_release;
-
- hwif = host->ports[0];
-
- if (hwif->present)
- return host;
-
- /* retry registration in case device is still spinning up */
- for (i = 0; i < 10; i++) {
- msleep(100);
- ide_port_scan(hwif);
- if (hwif->present)
- return host;
- }
-
- return host;
-
-out_release:
- release_region(ctl, 1);
- release_region(io, 8);
- return NULL;
-}
-
-static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
-{
- int *is_kme = priv_data;
-
- if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
- != IO_DATA_PATH_WIDTH_8) {
- pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- }
- pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-
- if (pdev->resource[1]->end) {
- pdev->resource[0]->end = 8;
- pdev->resource[1]->end = (*is_kme) ? 2 : 1;
- } else {
- if (pdev->resource[0]->end < 16)
- return -ENODEV;
- }
-
- return pcmcia_request_io(pdev);
-}
-
-static int ide_config(struct pcmcia_device *link)
-{
- ide_info_t *info = link->priv;
- int ret = 0, is_kme = 0;
- unsigned long io_base, ctl_base;
- struct ide_host *host;
-
- dev_dbg(&link->dev, "ide_config(0x%p)\n", link);
-
- is_kme = ((link->manf_id == MANFID_KME) &&
- ((link->card_id == PRODID_KME_KXLC005_A) ||
- (link->card_id == PRODID_KME_KXLC005_B)));
-
- if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) {
- link->config_flags &= ~CONF_AUTO_CHECK_VCC;
- if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme))
- goto failed; /* No suitable config found */
- }
- io_base = link->resource[0]->start;
- if (link->resource[1]->end)
- ctl_base = link->resource[1]->start;
- else
- ctl_base = link->resource[0]->start + 0x0e;
-
- if (!link->irq)
- goto failed;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- /* disable drive interrupts during IDE probe */
- outb(0x02, ctl_base);
-
- /* special setup for KXLC005 card */
- if (is_kme)
- outb(0x81, ctl_base+1);
-
- host = idecs_register(io_base, ctl_base, link->irq, link);
- if (host == NULL && resource_size(link->resource[0]) == 0x20) {
- outb(0x02, ctl_base + 0x10);
- host = idecs_register(io_base + 0x10, ctl_base + 0x10,
- link->irq, link);
- }
-
- if (host == NULL)
- goto failed;
-
- info->ndev = 1;
- info->host = host;
- dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n",
- 'a' + host->ports[0]->index * 2,
- link->vpp / 10, link->vpp % 10);
-
- return 0;
-
-failed:
- ide_release(link);
- return -ENODEV;
-} /* ide_config */
-
-static void ide_release(struct pcmcia_device *link)
-{
- ide_info_t *info = link->priv;
- struct ide_host *host = info->host;
-
- dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
-
- if (info->ndev) {
- ide_hwif_t *hwif = host->ports[0];
- unsigned long data_addr, ctl_addr;
-
- data_addr = hwif->io_ports.data_addr;
- ctl_addr = hwif->io_ports.ctl_addr;
-
- ide_host_remove(host);
- info->ndev = 0;
-
- release_region(ctl_addr, 1);
- release_region(data_addr, 8);
- }
-
- pcmcia_disable_device(link);
-} /* ide_release */
-
-
-static const struct pcmcia_device_id ide_ids[] = {
- PCMCIA_DEVICE_FUNC_ID(4),
- PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
- PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
- PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
- PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
- PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
- PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
- PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
- PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
- PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
- PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
- PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
- PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
- PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
- PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
- PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
- PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
- PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
- PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
- PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
- PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
- PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
- PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
- PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
- PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
- PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
- PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
- PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
- PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
- PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
- PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
- PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
- PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
- PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
- PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
- PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
- PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
- PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
- PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
- PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
- PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
- PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
- PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
- PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
- PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
- PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
- PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
- PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
- PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, ide_ids);
-
-static struct pcmcia_driver ide_cs_driver = {
- .owner = THIS_MODULE,
- .name = "ide-cs",
- .probe = ide_probe,
- .remove = ide_detach,
- .id_table = ide_ids,
-};
-
-static int __init init_ide_cs(void)
-{
- return pcmcia_register_driver(&ide_cs_driver);
-}
-
-static void __exit exit_ide_cs(void)
-{
- pcmcia_unregister_driver(&ide_cs_driver);
-}
-
-late_initcall(init_ide_cs);
-module_exit(exit_ide_cs);
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
deleted file mode 100644
index ca1d4b3d3878..000000000000
--- a/drivers/ide/ide-devsets.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/ide.h>
-
-DEFINE_MUTEX(ide_setting_mtx);
-
-ide_devset_get(io_32bit, io_32bit);
-
-static int set_io_32bit(ide_drive_t *drive, int arg)
-{
- if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT)
- return -EPERM;
-
- if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
- return -EINVAL;
-
- drive->io_32bit = arg;
-
- return 0;
-}
-
-ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS);
-
-static int set_ksettings(ide_drive_t *drive, int arg)
-{
- if (arg < 0 || arg > 1)
- return -EINVAL;
-
- if (arg)
- drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS;
- else
- drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS;
-
- return 0;
-}
-
-ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA);
-
-static int set_using_dma(ide_drive_t *drive, int arg)
-{
-#ifdef CONFIG_BLK_DEV_IDEDMA
- int err = -EPERM;
-
- if (arg < 0 || arg > 1)
- return -EINVAL;
-
- if (ata_id_has_dma(drive->id) == 0)
- goto out;
-
- if (drive->hwif->dma_ops == NULL)
- goto out;
-
- err = 0;
-
- if (arg) {
- if (ide_set_dma(drive))
- err = -EIO;
- } else
- ide_dma_off(drive);
-
-out:
- return err;
-#else
- if (arg < 0 || arg > 1)
- return -EINVAL;
-
- return -EPERM;
-#endif
-}
-
-/*
- * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
- */
-static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
-{
- switch (req_pio) {
- case 202:
- case 201:
- case 200:
- case 102:
- case 101:
- case 100:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
- case 9:
- case 8:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
- case 7:
- case 6:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
- default:
- return 0;
- }
-}
-
-static int set_pio_mode(ide_drive_t *drive, int arg)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (arg < 0 || arg > 255)
- return -EINVAL;
-
- if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
- (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
- return -ENOSYS;
-
- if (set_pio_mode_abuse(drive->hwif, arg)) {
- drive->pio_mode = arg + XFER_PIO_0;
-
- if (arg == 8 || arg == 9) {
- unsigned long flags;
-
- /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */
- spin_lock_irqsave(&hwif->lock, flags);
- port_ops->set_pio_mode(hwif, drive);
- spin_unlock_irqrestore(&hwif->lock, flags);
- } else
- port_ops->set_pio_mode(hwif, drive);
- } else {
- int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
-
- ide_set_pio(drive, arg);
-
- if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
- if (keep_dma)
- ide_dma_on(drive);
- }
- }
-
- return 0;
-}
-
-ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK);
-
-static int set_unmaskirq(ide_drive_t *drive, int arg)
-{
- if (drive->dev_flags & IDE_DFLAG_NO_UNMASK)
- return -EPERM;
-
- if (arg < 0 || arg > 1)
- return -EINVAL;
-
- if (arg)
- drive->dev_flags |= IDE_DFLAG_UNMASK;
- else
- drive->dev_flags &= ~IDE_DFLAG_UNMASK;
-
- return 0;
-}
-
-ide_ext_devset_rw_sync(io_32bit, io_32bit);
-ide_ext_devset_rw_sync(keepsettings, ksettings);
-ide_ext_devset_rw_sync(unmaskirq, unmaskirq);
-ide_ext_devset_rw_sync(using_dma, using_dma);
-__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode);
-
-int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
- int arg)
-{
- struct request_queue *q = drive->queue;
- struct request *rq;
- int ret = 0;
-
- if (!(setting->flags & DS_SYNC))
- return setting->set(drive, arg);
-
- rq = blk_get_request(q, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_MISC;
- scsi_req(rq)->cmd_len = 5;
- scsi_req(rq)->cmd[0] = REQ_DEVSET_EXEC;
- *(int *)&scsi_req(rq)->cmd[1] = arg;
- ide_req(rq)->special = setting->set;
-
- blk_execute_rq(NULL, rq, 0);
- ret = scsi_req(rq)->result;
- blk_put_request(rq);
-
- return ret;
-}
-
-ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq)
-{
- int err, (*setfunc)(ide_drive_t *, int) = ide_req(rq)->special;
-
- err = setfunc(drive, *(int *)&scsi_req(rq)->cmd[1]);
- if (err)
- scsi_req(rq)->result = err;
- ide_complete_rq(drive, 0, blk_rq_bytes(rq));
- return ide_stopped;
-}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
deleted file mode 100644
index 8413731c6259..000000000000
--- a/drivers/ide/ide-disk.c
+++ /dev/null
@@ -1,795 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
- * Copyright (C) 1998-2002 Linux ATA Development
- * Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2003 Red Hat
- * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
- */
-
-/*
- * Mostly written by Mark Lord <mlord@...ox.com>
- * and Gadi Oxman <gadio@...vision.net.il>
- * and Andre Hedrick <andre@...ux-ide.org>
- *
- * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/leds.h>
-#include <linux/ide.h>
-
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/div64.h>
-
-#include "ide-disk.h"
-
-static const u8 ide_rw_cmds[] = {
- ATA_CMD_READ_MULTI,
- ATA_CMD_WRITE_MULTI,
- ATA_CMD_READ_MULTI_EXT,
- ATA_CMD_WRITE_MULTI_EXT,
- ATA_CMD_PIO_READ,
- ATA_CMD_PIO_WRITE,
- ATA_CMD_PIO_READ_EXT,
- ATA_CMD_PIO_WRITE_EXT,
- ATA_CMD_READ,
- ATA_CMD_WRITE,
- ATA_CMD_READ_EXT,
- ATA_CMD_WRITE_EXT,
-};
-
-static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
-{
- u8 index, lba48, write;
-
- lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
- write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
-
- if (dma) {
- cmd->protocol = ATA_PROT_DMA;
- index = 8;
- } else {
- cmd->protocol = ATA_PROT_PIO;
- if (drive->mult_count) {
- cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
- index = 0;
- } else
- index = 4;
- }
-
- cmd->tf.command = ide_rw_cmds[index + lba48 + write];
-}
-
-/*
- * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
- * using LBA if supported, or CHS otherwise, to address sectors.
- */
-static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
- sector_t block)
-{
- ide_hwif_t *hwif = drive->hwif;
- u16 nsectors = (u16)blk_rq_sectors(rq);
- u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
- u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
- ide_startstop_t rc;
-
- if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
- if (block + blk_rq_sectors(rq) > 1ULL << 28)
- dma = 0;
- else
- lba48 = 0;
- }
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
-
- if (drive->dev_flags & IDE_DFLAG_LBA) {
- if (lba48) {
- pr_debug("%s: LBA=0x%012llx\n", drive->name,
- (unsigned long long)block);
-
- tf->nsect = nsectors & 0xff;
- tf->lbal = (u8) block;
- tf->lbam = (u8)(block >> 8);
- tf->lbah = (u8)(block >> 16);
- tf->device = ATA_LBA;
-
- tf = &cmd.hob;
- tf->nsect = (nsectors >> 8) & 0xff;
- tf->lbal = (u8)(block >> 24);
- if (sizeof(block) != 4) {
- tf->lbam = (u8)((u64)block >> 32);
- tf->lbah = (u8)((u64)block >> 40);
- }
-
- cmd.valid.out.hob = IDE_VALID_OUT_HOB;
- cmd.valid.in.hob = IDE_VALID_IN_HOB;
- cmd.tf_flags |= IDE_TFLAG_LBA48;
- } else {
- tf->nsect = nsectors & 0xff;
- tf->lbal = block;
- tf->lbam = block >>= 8;
- tf->lbah = block >>= 8;
- tf->device = ((block >> 8) & 0xf) | ATA_LBA;
- }
- } else {
- unsigned int sect, head, cyl, track;
-
- track = (int)block / drive->sect;
- sect = (int)block % drive->sect + 1;
- head = track % drive->head;
- cyl = track / drive->head;
-
- pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
-
- tf->nsect = nsectors & 0xff;
- tf->lbal = sect;
- tf->lbam = cyl;
- tf->lbah = cyl >> 8;
- tf->device = head;
- }
-
- cmd.tf_flags |= IDE_TFLAG_FS;
-
- if (rq_data_dir(rq))
- cmd.tf_flags |= IDE_TFLAG_WRITE;
-
- ide_tf_set_cmd(drive, &cmd, dma);
- cmd.rq = rq;
-
- if (dma == 0) {
- ide_init_sg_cmd(&cmd, nsectors << 9);
- ide_map_sg(drive, &cmd);
- }
-
- rc = do_rw_taskfile(drive, &cmd);
-
- if (rc == ide_stopped && dma) {
- /* fallback to PIO */
- cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
- ide_tf_set_cmd(drive, &cmd, 0);
- ide_init_sg_cmd(&cmd, nsectors << 9);
- rc = do_rw_taskfile(drive, &cmd);
- }
-
- return rc;
-}
-
-/*
- * 268435455 == 137439 MB or 28bit limit
- * 320173056 == 163929 MB or 48bit addressing
- * 1073741822 == 549756 MB or 48bit addressing fake drive
- */
-
-static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
- sector_t block)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
- BUG_ON(blk_rq_is_passthrough(rq));
-
- ledtrig_disk_activity(rq_data_dir(rq) == WRITE);
-
- pr_debug("%s: %sing: block=%llu, sectors=%u\n",
- drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
- (unsigned long long)block, blk_rq_sectors(rq));
-
- if (hwif->rw_disk)
- hwif->rw_disk(drive, rq);
-
- return __ide_do_rw_disk(drive, rq, block);
-}
-
-/*
- * Queries for true maximum capacity of the drive.
- * Returns maximum LBA address (> 0) of the drive, 0 if failed.
- */
-static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
-{
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
- u64 addr = 0;
-
- memset(&cmd, 0, sizeof(cmd));
- if (lba48)
- tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
- else
- tf->command = ATA_CMD_READ_NATIVE_MAX;
- tf->device = ATA_LBA;
-
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- if (lba48) {
- cmd.valid.out.hob = IDE_VALID_OUT_HOB;
- cmd.valid.in.hob = IDE_VALID_IN_HOB;
- cmd.tf_flags = IDE_TFLAG_LBA48;
- }
-
- ide_no_data_taskfile(drive, &cmd);
-
- /* if OK, compute maximum address value */
- if (!(tf->status & ATA_ERR))
- addr = ide_get_lba_addr(&cmd, lba48) + 1;
-
- return addr;
-}
-
-/*
- * Sets maximum virtual LBA address of the drive.
- * Returns new maximum virtual LBA address (> 0) or 0 on failure.
- */
-static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
-{
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
- u64 addr_set = 0;
-
- addr_req--;
-
- memset(&cmd, 0, sizeof(cmd));
- tf->lbal = (addr_req >> 0) & 0xff;
- tf->lbam = (addr_req >>= 8) & 0xff;
- tf->lbah = (addr_req >>= 8) & 0xff;
- if (lba48) {
- cmd.hob.lbal = (addr_req >>= 8) & 0xff;
- cmd.hob.lbam = (addr_req >>= 8) & 0xff;
- cmd.hob.lbah = (addr_req >>= 8) & 0xff;
- tf->command = ATA_CMD_SET_MAX_EXT;
- } else {
- tf->device = (addr_req >>= 8) & 0x0f;
- tf->command = ATA_CMD_SET_MAX;
- }
- tf->device |= ATA_LBA;
-
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- if (lba48) {
- cmd.valid.out.hob = IDE_VALID_OUT_HOB;
- cmd.valid.in.hob = IDE_VALID_IN_HOB;
- cmd.tf_flags = IDE_TFLAG_LBA48;
- }
-
- ide_no_data_taskfile(drive, &cmd);
-
- /* if OK, compute maximum address value */
- if (!(tf->status & ATA_ERR))
- addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
-
- return addr_set;
-}
-
-static unsigned long long sectors_to_MB(unsigned long long n)
-{
- n <<= 9; /* make it bytes */
- do_div(n, 1000000); /* make it MB */
- return n;
-}
-
-/*
- * Some disks report total number of sectors instead of
- * maximum sector address. We list them here.
- */
-static const struct drive_list_entry hpa_list[] = {
- { "ST340823A", NULL },
- { "ST320413A", NULL },
- { "ST310211A", NULL },
- { NULL, NULL }
-};
-
-static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
-{
- u64 capacity, set_max;
-
- capacity = drive->capacity64;
- set_max = idedisk_read_native_max_address(drive, lba48);
-
- if (ide_in_drive_list(drive->id, hpa_list)) {
- /*
- * Since we are inclusive wrt to firmware revisions do this
- * extra check and apply the workaround only when needed.
- */
- if (set_max == capacity + 1)
- set_max--;
- }
-
- return set_max;
-}
-
-static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
-{
- set_max = idedisk_set_max_address(drive, set_max, lba48);
- if (set_max)
- drive->capacity64 = set_max;
-
- return set_max;
-}
-
-static void idedisk_check_hpa(ide_drive_t *drive)
-{
- u64 capacity, set_max;
- int lba48 = ata_id_lba48_enabled(drive->id);
-
- capacity = drive->capacity64;
- set_max = ide_disk_hpa_get_native_capacity(drive, lba48);
-
- if (set_max <= capacity)
- return;
-
- drive->probed_capacity = set_max;
-
- printk(KERN_INFO "%s: Host Protected Area detected.\n"
- "\tcurrent capacity is %llu sectors (%llu MB)\n"
- "\tnative capacity is %llu sectors (%llu MB)\n",
- drive->name,
- capacity, sectors_to_MB(capacity),
- set_max, sectors_to_MB(set_max));
-
- if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
- return;
-
- set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
- if (set_max)
- printk(KERN_INFO "%s: Host Protected Area disabled.\n",
- drive->name);
-}
-
-static int ide_disk_get_capacity(ide_drive_t *drive)
-{
- u16 *id = drive->id;
- int lba;
-
- if (ata_id_lba48_enabled(id)) {
- /* drive speaks 48-bit LBA */
- lba = 1;
- drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
- } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
- /* drive speaks 28-bit LBA */
- lba = 1;
- drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
- } else {
- /* drive speaks boring old 28-bit CHS */
- lba = 0;
- drive->capacity64 = drive->cyl * drive->head * drive->sect;
- }
-
- drive->probed_capacity = drive->capacity64;
-
- if (lba) {
- drive->dev_flags |= IDE_DFLAG_LBA;
-
- /*
- * If this device supports the Host Protected Area feature set,
- * then we may need to change our opinion about its capacity.
- */
- if (ata_id_hpa_enabled(id))
- idedisk_check_hpa(drive);
- }
-
- /* limit drive capacity to 137GB if LBA48 cannot be used */
- if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
- drive->capacity64 > 1ULL << 28) {
- printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
- "%llu sectors (%llu MB)\n",
- drive->name, (unsigned long long)drive->capacity64,
- sectors_to_MB(drive->capacity64));
- drive->probed_capacity = drive->capacity64 = 1ULL << 28;
- }
-
- if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
- (drive->dev_flags & IDE_DFLAG_LBA48)) {
- if (drive->capacity64 > 1ULL << 28) {
- printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
- " will be used for accessing sectors "
- "> %u\n", drive->name, 1 << 28);
- } else
- drive->dev_flags &= ~IDE_DFLAG_LBA48;
- }
-
- return 0;
-}
-
-static void ide_disk_unlock_native_capacity(ide_drive_t *drive)
-{
- u16 *id = drive->id;
- int lba48 = ata_id_lba48_enabled(id);
-
- if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
- ata_id_hpa_enabled(id) == 0)
- return;
-
- /*
- * according to the spec the SET MAX ADDRESS command shall be
- * immediately preceded by a READ NATIVE MAX ADDRESS command
- */
- if (!ide_disk_hpa_get_native_capacity(drive, lba48))
- return;
-
- if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48))
- drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
-}
-
-static bool idedisk_prep_rq(ide_drive_t *drive, struct request *rq)
-{
- struct ide_cmd *cmd;
-
- if (req_op(rq) != REQ_OP_FLUSH)
- return true;
-
- if (ide_req(rq)->special) {
- cmd = ide_req(rq)->special;
- memset(cmd, 0, sizeof(*cmd));
- } else {
- cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
- }
-
- /* FIXME: map struct ide_taskfile on rq->cmd[] */
- BUG_ON(cmd == NULL);
-
- if (ata_id_flush_ext_enabled(drive->id) &&
- (drive->capacity64 >= (1UL << 28)))
- cmd->tf.command = ATA_CMD_FLUSH_EXT;
- else
- cmd->tf.command = ATA_CMD_FLUSH;
- cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd->tf_flags = IDE_TFLAG_DYN;
- cmd->protocol = ATA_PROT_NODATA;
- rq->cmd_flags &= ~REQ_OP_MASK;
- rq->cmd_flags |= REQ_OP_DRV_OUT;
- ide_req(rq)->type = ATA_PRIV_TASKFILE;
- ide_req(rq)->special = cmd;
- cmd->rq = rq;
-
- return true;
-}
-
-ide_devset_get(multcount, mult_count);
-
-/*
- * This is tightly woven into the driver->do_special can not touch.
- * DON'T do it again until a total personality rewrite is committed.
- */
-static int set_multcount(ide_drive_t *drive, int arg)
-{
- struct request *rq;
-
- if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
- return -EINVAL;
-
- if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
- return -EBUSY;
-
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_TASKFILE;
-
- drive->mult_req = arg;
- drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
- blk_execute_rq(NULL, rq, 0);
- blk_put_request(rq);
-
- return (drive->mult_count == arg) ? 0 : -EIO;
-}
-
-ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
-
-static int set_nowerr(ide_drive_t *drive, int arg)
-{
- if (arg < 0 || arg > 1)
- return -EINVAL;
-
- if (arg)
- drive->dev_flags |= IDE_DFLAG_NOWERR;
- else
- drive->dev_flags &= ~IDE_DFLAG_NOWERR;
-
- drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
-
- return 0;
-}
-
-static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
-{
- struct ide_cmd cmd;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf.feature = feature;
- cmd.tf.nsect = nsect;
- cmd.tf.command = ATA_CMD_SET_FEATURES;
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
-
- return ide_no_data_taskfile(drive, &cmd);
-}
-
-static void update_flush(ide_drive_t *drive)
-{
- u16 *id = drive->id;
- bool wc = false;
-
- if (drive->dev_flags & IDE_DFLAG_WCACHE) {
- unsigned long long capacity;
- int barrier;
- /*
- * We must avoid issuing commands a drive does not
- * understand or we may crash it. We check flush cache
- * is supported. We also check we have the LBA48 flush
- * cache if the drive capacity is too large. By this
- * time we have trimmed the drive capacity if LBA48 is
- * not available so we don't need to recheck that.
- */
- capacity = ide_gd_capacity(drive);
- barrier = ata_id_flush_enabled(id) &&
- (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
- ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
- capacity <= (1ULL << 28) ||
- ata_id_flush_ext_enabled(id));
-
- printk(KERN_INFO "%s: cache flushes %ssupported\n",
- drive->name, barrier ? "" : "not ");
-
- if (barrier) {
- wc = true;
- drive->prep_rq = idedisk_prep_rq;
- }
- }
-
- blk_queue_write_cache(drive->queue, wc, false);
-}
-
-ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
-
-static int set_wcache(ide_drive_t *drive, int arg)
-{
- int err = 1;
-
- if (arg < 0 || arg > 1)
- return -EINVAL;
-
- if (ata_id_flush_enabled(drive->id)) {
- err = ide_do_setfeature(drive,
- arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
- if (err == 0) {
- if (arg)
- drive->dev_flags |= IDE_DFLAG_WCACHE;
- else
- drive->dev_flags &= ~IDE_DFLAG_WCACHE;
- }
- }
-
- update_flush(drive);
-
- return err;
-}
-
-static int do_idedisk_flushcache(ide_drive_t *drive)
-{
- struct ide_cmd cmd;
-
- memset(&cmd, 0, sizeof(cmd));
- if (ata_id_flush_ext_enabled(drive->id))
- cmd.tf.command = ATA_CMD_FLUSH_EXT;
- else
- cmd.tf.command = ATA_CMD_FLUSH;
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
-
- return ide_no_data_taskfile(drive, &cmd);
-}
-
-ide_devset_get(acoustic, acoustic);
-
-static int set_acoustic(ide_drive_t *drive, int arg)
-{
- if (arg < 0 || arg > 254)
- return -EINVAL;
-
- ide_do_setfeature(drive,
- arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
-
- drive->acoustic = arg;
-
- return 0;
-}
-
-ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
-
-/*
- * drive->addressing:
- * 0: 28-bit
- * 1: 48-bit
- * 2: 48-bit capable doing 28-bit
- */
-static int set_addressing(ide_drive_t *drive, int arg)
-{
- if (arg < 0 || arg > 2)
- return -EINVAL;
-
- if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
- ata_id_lba48_enabled(drive->id) == 0))
- return -EIO;
-
- if (arg == 2)
- arg = 0;
-
- if (arg)
- drive->dev_flags |= IDE_DFLAG_LBA48;
- else
- drive->dev_flags &= ~IDE_DFLAG_LBA48;
-
- return 0;
-}
-
-ide_ext_devset_rw(acoustic, acoustic);
-ide_ext_devset_rw(address, addressing);
-ide_ext_devset_rw(multcount, multcount);
-ide_ext_devset_rw(wcache, wcache);
-
-ide_ext_devset_rw_sync(nowerr, nowerr);
-
-static int ide_disk_check(ide_drive_t *drive, const char *s)
-{
- return 1;
-}
-
-static void ide_disk_setup(ide_drive_t *drive)
-{
- struct ide_disk_obj *idkp = drive->driver_data;
- struct request_queue *q = drive->queue;
- ide_hwif_t *hwif = drive->hwif;
- u16 *id = drive->id;
- char *m = (char *)&id[ATA_ID_PROD];
- unsigned long long capacity;
-
- ide_proc_register_driver(drive, idkp->driver);
-
- if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
- return;
-
- if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
- /*
- * Removable disks (eg. SYQUEST); ignore 'WD' drives
- */
- if (m[0] != 'W' || m[1] != 'D')
- drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
- }
-
- (void)set_addressing(drive, 1);
-
- if (drive->dev_flags & IDE_DFLAG_LBA48) {
- int max_s = 2048;
-
- if (max_s > hwif->rqsize)
- max_s = hwif->rqsize;
-
- blk_queue_max_hw_sectors(q, max_s);
- }
-
- printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
- queue_max_sectors(q) / 2);
-
- if (ata_id_is_ssd(id)) {
- blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
- blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
- }
-
- /* calculate drive capacity, and select LBA if possible */
- ide_disk_get_capacity(drive);
-
- /*
- * if possible, give fdisk access to more of the drive,
- * by correcting bios_cyls:
- */
- capacity = ide_gd_capacity(drive);
-
- if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
- if (ata_id_lba48_enabled(drive->id)) {
- /* compatibility */
- drive->bios_sect = 63;
- drive->bios_head = 255;
- }
-
- if (drive->bios_sect && drive->bios_head) {
- unsigned int cap0 = capacity; /* truncate to 32 bits */
- unsigned int cylsz, cyl;
-
- if (cap0 != capacity)
- drive->bios_cyl = 65535;
- else {
- cylsz = drive->bios_sect * drive->bios_head;
- cyl = cap0 / cylsz;
- if (cyl > 65535)
- cyl = 65535;
- if (cyl > drive->bios_cyl)
- drive->bios_cyl = cyl;
- }
- }
- }
- printk(KERN_INFO "%s: %llu sectors (%llu MB)",
- drive->name, capacity, sectors_to_MB(capacity));
-
- /* Only print cache size when it was specified */
- if (id[ATA_ID_BUF_SIZE])
- printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
-
- printk(KERN_CONT ", CHS=%d/%d/%d\n",
- drive->bios_cyl, drive->bios_head, drive->bios_sect);
-
- /* write cache enabled? */
- if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
- drive->dev_flags |= IDE_DFLAG_WCACHE;
-
- set_wcache(drive, 1);
-
- if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
- (drive->head == 0 || drive->head > 16))
- printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
- drive->name, drive->head);
-}
-
-static void ide_disk_flush(ide_drive_t *drive)
-{
- if (ata_id_flush_enabled(drive->id) == 0 ||
- (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
- return;
-
- if (do_idedisk_flushcache(drive))
- printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
-}
-
-static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
-{
- return 0;
-}
-
-static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
- int on)
-{
- struct ide_cmd cmd;
- int ret;
-
- if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
- return 0;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
-
- ret = ide_no_data_taskfile(drive, &cmd);
-
- if (ret)
- drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
-
- return ret;
-}
-
-const struct ide_disk_ops ide_ata_disk_ops = {
- .check = ide_disk_check,
- .unlock_native_capacity = ide_disk_unlock_native_capacity,
- .get_capacity = ide_disk_get_capacity,
- .setup = ide_disk_setup,
- .flush = ide_disk_flush,
- .init_media = ide_disk_init_media,
- .set_doorlock = ide_disk_set_doorlock,
- .do_request = ide_do_rw_disk,
- .ioctl = ide_disk_ioctl,
- .compat_ioctl = ide_disk_ioctl,
-};
diff --git a/drivers/ide/ide-disk.h b/drivers/ide/ide-disk.h
deleted file mode 100644
index 0e8cc18bfda6..000000000000
--- a/drivers/ide/ide-disk.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __IDE_DISK_H
-#define __IDE_DISK_H
-
-#include "ide-gd.h"
-
-#ifdef CONFIG_IDE_GD_ATA
-/* ide-disk.c */
-extern const struct ide_disk_ops ide_ata_disk_ops;
-ide_decl_devset(address);
-ide_decl_devset(multcount);
-ide_decl_devset(nowerr);
-ide_decl_devset(wcache);
-ide_decl_devset(acoustic);
-
-/* ide-disk_ioctl.c */
-int ide_disk_ioctl(ide_drive_t *, struct block_device *, fmode_t, unsigned int,
- unsigned long);
-
-#ifdef CONFIG_IDE_PROC_FS
-/* ide-disk_proc.c */
-extern ide_proc_entry_t ide_disk_proc[];
-extern const struct ide_proc_devset ide_disk_settings[];
-#endif
-#else
-#define ide_disk_proc NULL
-#define ide_disk_settings NULL
-#endif
-
-#endif /* __IDE_DISK_H */
diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c
deleted file mode 100644
index 2c45616cff4f..000000000000
--- a/drivers/ide/ide-disk_ioctl.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/hdreg.h>
-#include <linux/mutex.h>
-
-#include "ide-disk.h"
-
-static DEFINE_MUTEX(ide_disk_ioctl_mutex);
-static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
-{ HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address },
-{ HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount },
-{ HDIO_GET_NOWERR, HDIO_SET_NOWERR, &ide_devset_nowerr },
-{ HDIO_GET_WCACHE, HDIO_SET_WCACHE, &ide_devset_wcache },
-{ HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, &ide_devset_acoustic },
-{ 0 }
-};
-
-int ide_disk_ioctl(ide_drive_t *drive, struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- int err;
-
- mutex_lock(&ide_disk_ioctl_mutex);
- err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
- if (err != -EOPNOTSUPP)
- goto out;
-
- err = generic_ide_ioctl(drive, bdev, cmd, arg);
-out:
- mutex_unlock(&ide_disk_ioctl_mutex);
- return err;
-}
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
deleted file mode 100644
index 95d239b2f646..000000000000
--- a/drivers/ide/ide-disk_proc.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/seq_file.h>
-
-#include "ide-disk.h"
-
-static int smart_enable(ide_drive_t *drive)
-{
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
-
- memset(&cmd, 0, sizeof(cmd));
- tf->feature = ATA_SMART_ENABLE;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
-
- return ide_no_data_taskfile(drive, &cmd);
-}
-
-static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
-{
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
-
- memset(&cmd, 0, sizeof(cmd));
- tf->feature = sub_cmd;
- tf->nsect = 0x01;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- cmd.protocol = ATA_PROT_PIO;
-
- return ide_raw_taskfile(drive, &cmd, buf, 1);
-}
-
-static int idedisk_cache_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t *drive = (ide_drive_t *) m->private;
-
- if (drive->dev_flags & IDE_DFLAG_ID_READ)
- seq_printf(m, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
- else
- seq_printf(m, "(none)\n");
- return 0;
-}
-
-static int idedisk_capacity_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t*drive = (ide_drive_t *)m->private;
-
- seq_printf(m, "%llu\n", (long long)ide_gd_capacity(drive));
- return 0;
-}
-
-static int __idedisk_proc_show(struct seq_file *m, ide_drive_t *drive, u8 sub_cmd)
-{
- u8 *buf;
-
- buf = kmalloc(SECTOR_SIZE, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- (void)smart_enable(drive);
-
- if (get_smart_data(drive, buf, sub_cmd) == 0) {
- __le16 *val = (__le16 *)buf;
- int i;
-
- for (i = 0; i < SECTOR_SIZE / 2; i++) {
- seq_printf(m, "%04x%c", le16_to_cpu(val[i]),
- (i % 8) == 7 ? '\n' : ' ');
- }
- }
- kfree(buf);
- return 0;
-}
-
-static int idedisk_sv_proc_show(struct seq_file *m, void *v)
-{
- return __idedisk_proc_show(m, m->private, ATA_SMART_READ_VALUES);
-}
-
-static int idedisk_st_proc_show(struct seq_file *m, void *v)
-{
- return __idedisk_proc_show(m, m->private, ATA_SMART_READ_THRESHOLDS);
-}
-
-ide_proc_entry_t ide_disk_proc[] = {
- { "cache", S_IFREG|S_IRUGO, idedisk_cache_proc_show },
- { "capacity", S_IFREG|S_IRUGO, idedisk_capacity_proc_show },
- { "geometry", S_IFREG|S_IRUGO, ide_geometry_proc_show },
- { "smart_values", S_IFREG|S_IRUSR, idedisk_sv_proc_show },
- { "smart_thresholds", S_IFREG|S_IRUSR, idedisk_st_proc_show },
- {}
-};
-
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-ide_devset_rw_field(failures, failures);
-ide_devset_rw_field(lun, lun);
-ide_devset_rw_field(max_failures, max_failures);
-
-const struct ide_proc_devset ide_disk_settings[] = {
- IDE_PROC_DEVSET(acoustic, 0, 254),
- IDE_PROC_DEVSET(address, 0, 2),
- IDE_PROC_DEVSET(bios_cyl, 0, 65535),
- IDE_PROC_DEVSET(bios_head, 0, 255),
- IDE_PROC_DEVSET(bios_sect, 0, 63),
- IDE_PROC_DEVSET(failures, 0, 65535),
- IDE_PROC_DEVSET(lun, 0, 7),
- IDE_PROC_DEVSET(max_failures, 0, 65535),
- IDE_PROC_DEVSET(multcount, 0, 16),
- IDE_PROC_DEVSET(nowerr, 0, 1),
- IDE_PROC_DEVSET(wcache, 0, 1),
- { NULL },
-};
diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c
deleted file mode 100644
index b7c2c0bd18b5..000000000000
--- a/drivers/ide/ide-dma-sff.c
+++ /dev/null
@@ -1,336 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ide.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-/**
- * config_drive_for_dma - attempt to activate IDE DMA
- * @drive: the drive to place in DMA mode
- *
- * If the drive supports at least mode 2 DMA or UDMA of any kind
- * then attempt to place it into DMA mode. Drives that are known to
- * support DMA but predate the DMA properties or that are known
- * to have DMA handling bugs are also set up appropriately based
- * on the good/bad drive lists.
- */
-
-int config_drive_for_dma(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u16 *id = drive->id;
-
- if (drive->media != ide_disk) {
- if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
- return 0;
- }
-
- /*
- * Enable DMA on any drive that has
- * UltraDMA (mode 0/1/2/3/4/5/6) enabled
- */
- if ((id[ATA_ID_FIELD_VALID] & 4) &&
- ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f))
- return 1;
-
- /*
- * Enable DMA on any drive that has mode2 DMA
- * (multi or single) enabled
- */
- if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 ||
- (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404)
- return 1;
-
- /* Consult the list of known "good" drives */
- if (ide_dma_good_drive(drive))
- return 1;
-
- return 0;
-}
-
-u8 ide_dma_sff_read_status(ide_hwif_t *hwif)
-{
- unsigned long addr = hwif->dma_base + ATA_DMA_STATUS;
-
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- return readb((void __iomem *)addr);
- else
- return inb(addr);
-}
-EXPORT_SYMBOL_GPL(ide_dma_sff_read_status);
-
-static void ide_dma_sff_write_status(ide_hwif_t *hwif, u8 val)
-{
- unsigned long addr = hwif->dma_base + ATA_DMA_STATUS;
-
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writeb(val, (void __iomem *)addr);
- else
- outb(val, addr);
-}
-
-/**
- * ide_dma_host_set - Enable/disable DMA on a host
- * @drive: drive to control
- *
- * Enable/disable DMA on an IDE controller following generic
- * bus-mastering IDE controller behaviour.
- */
-
-void ide_dma_host_set(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 unit = drive->dn & 1;
- u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
-
- if (on)
- dma_stat |= (1 << (5 + unit));
- else
- dma_stat &= ~(1 << (5 + unit));
-
- ide_dma_sff_write_status(hwif, dma_stat);
-}
-EXPORT_SYMBOL_GPL(ide_dma_host_set);
-
-/**
- * ide_build_dmatable - build IDE DMA table
- *
- * ide_build_dmatable() prepares a dma request. We map the command
- * to get the pci bus addresses of the buffers and then build up
- * the PRD table that the IDE layer wants to be fed.
- *
- * Most chipsets correctly interpret a length of 0x0000 as 64KB,
- * but at least one (e.g. CS5530) misinterprets it as zero (!).
- * So we break the 64KB entry into two 32KB entries instead.
- *
- * Returns the number of built PRD entries if all went okay,
- * returns 0 otherwise.
- *
- * May also be invoked from trm290.c
- */
-
-int ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- __le32 *table = (__le32 *)hwif->dmatable_cpu;
- unsigned int count = 0;
- int i;
- struct scatterlist *sg;
- u8 is_trm290 = !!(hwif->host_flags & IDE_HFLAG_TRM290);
-
- for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) {
- u32 cur_addr, cur_len, xcount, bcount;
-
- cur_addr = sg_dma_address(sg);
- cur_len = sg_dma_len(sg);
-
- /*
- * Fill in the dma table, without crossing any 64kB boundaries.
- * Most hardware requires 16-bit alignment of all blocks,
- * but the trm290 requires 32-bit alignment.
- */
-
- while (cur_len) {
- if (count++ >= PRD_ENTRIES)
- goto use_pio_instead;
-
- bcount = 0x10000 - (cur_addr & 0xffff);
- if (bcount > cur_len)
- bcount = cur_len;
- *table++ = cpu_to_le32(cur_addr);
- xcount = bcount & 0xffff;
- if (is_trm290)
- xcount = ((xcount >> 2) - 1) << 16;
- else if (xcount == 0x0000) {
- if (count++ >= PRD_ENTRIES)
- goto use_pio_instead;
- *table++ = cpu_to_le32(0x8000);
- *table++ = cpu_to_le32(cur_addr + 0x8000);
- xcount = 0x8000;
- }
- *table++ = cpu_to_le32(xcount);
- cur_addr += bcount;
- cur_len -= bcount;
- }
- }
-
- if (count) {
- if (!is_trm290)
- *--table |= cpu_to_le32(0x80000000);
- return count;
- }
-
-use_pio_instead:
- printk(KERN_ERR "%s: %s\n", drive->name,
- count ? "DMA table too small" : "empty DMA table?");
-
- return 0; /* revert to PIO for this request */
-}
-EXPORT_SYMBOL_GPL(ide_build_dmatable);
-
-/**
- * ide_dma_setup - begin a DMA phase
- * @drive: target device
- * @cmd: command
- *
- * Build an IDE DMA PRD (IDE speak for scatter gather table)
- * and then set up the DMA transfer registers for a device
- * that follows generic IDE PCI DMA behaviour. Controllers can
- * override this function if they need to
- *
- * Returns 0 on success. If a PIO fallback is required then 1
- * is returned.
- */
-
-int ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
- u8 dma_stat;
-
- /* fall back to pio! */
- if (ide_build_dmatable(drive, cmd) == 0) {
- ide_map_sg(drive, cmd);
- return 1;
- }
-
- /* PRD table */
- if (mmio)
- writel(hwif->dmatable_dma,
- (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
- else
- outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
-
- /* specify r/w */
- if (mmio)
- writeb(rw, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- else
- outb(rw, hwif->dma_base + ATA_DMA_CMD);
-
- /* read DMA status for INTR & ERROR flags */
- dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
-
- /* clear INTR & ERROR flags */
- ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_dma_setup);
-
-/**
- * ide_dma_sff_timer_expiry - handle a DMA timeout
- * @drive: Drive that timed out
- *
- * An IDE DMA transfer timed out. In the event of an error we ask
- * the driver to resolve the problem, if a DMA transfer is still
- * in progress we continue to wait (arguably we need to add a
- * secondary 'I don't care what the drive thinks' timeout here)
- * Finally if we have an interrupt we let it complete the I/O.
- * But only one time - we clear expiry and if it's still not
- * completed after WAIT_CMD, we error and retry in PIO.
- * This can occur if an interrupt is lost or due to hang or bugs.
- */
-
-int ide_dma_sff_timer_expiry(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
-
- printk(KERN_WARNING "%s: %s: DMA status (0x%02x)\n",
- drive->name, __func__, dma_stat);
-
- if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */
- return WAIT_CMD;
-
- hwif->expiry = NULL; /* one free ride for now */
-
- if (dma_stat & ATA_DMA_ERR) /* ERROR */
- return -1;
-
- if (dma_stat & ATA_DMA_ACTIVE) /* DMAing */
- return WAIT_CMD;
-
- if (dma_stat & ATA_DMA_INTR) /* Got an Interrupt */
- return WAIT_CMD;
-
- return 0; /* Status is unknown -- reset the bus */
-}
-EXPORT_SYMBOL_GPL(ide_dma_sff_timer_expiry);
-
-void ide_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_cmd;
-
- /* Note that this is done *after* the cmd has
- * been issued to the drive, as per the BM-IDE spec.
- * The Promise Ultra33 doesn't work correctly when
- * we do this part before issuing the drive cmd.
- */
- if (hwif->host_flags & IDE_HFLAG_MMIO) {
- dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- writeb(dma_cmd | ATA_DMA_START,
- (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- } else {
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd | ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
- }
-}
-EXPORT_SYMBOL_GPL(ide_dma_start);
-
-/* returns 1 on error, 0 otherwise */
-int ide_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat = 0, dma_cmd = 0;
-
- /* stop DMA */
- if (hwif->host_flags & IDE_HFLAG_MMIO) {
- dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- writeb(dma_cmd & ~ATA_DMA_START,
- (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- } else {
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
- }
-
- /* get DMA status */
- dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
-
- /* clear INTR & ERROR bits */
- ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR);
-
-#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR)
-
- /* verify good DMA status */
- if ((dma_stat & CHECK_DMA_MASK) != ATA_DMA_INTR)
- return 0x10 | dma_stat;
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_dma_end);
-
-/* returns 1 if dma irq issued, 0 otherwise */
-int ide_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
-
- return (dma_stat & ATA_DMA_INTR) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(ide_dma_test_irq);
-
-const struct ide_dma_ops sff_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-EXPORT_SYMBOL_GPL(sff_dma_ops);
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
deleted file mode 100644
index 6f344654ef22..000000000000
--- a/drivers/ide/ide-dma.c
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * IDE DMA support (including IDE PCI BM-DMA).
- *
- * Copyright (C) 1995-1998 Mark Lord
- * Copyright (C) 1999-2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2004, 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
- */
-
-/*
- * Special Thanks to Mark for his Six years of work.
- */
-
-/*
- * Thanks to "Christopher J. Reimer" <reimer@....carleton.ca> for
- * fixing the problem with the BIOS on some Acer motherboards.
- *
- * Thanks to "Benoit Poulot-Cazajous" <poulot@...rus.fr> for testing
- * "TX" chipset compatibility and for providing patches for the "TX" chipset.
- *
- * Thanks to Christian Brunner <chb@....de> for taking a good first crack
- * at generic DMA -- his patches were referred to when preparing this code.
- *
- * Most importantly, thanks to Robert Bringman <rob@...s.trion.com>
- * for supplying a Promise UDMA board & WD UDMA drive for this work!
- */
-
-#include <linux/types.h>
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ide.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-
-static const struct drive_list_entry drive_whitelist[] = {
- { "Micropolis 2112A" , NULL },
- { "CONNER CTMA 4000" , NULL },
- { "CONNER CTT8000-A" , NULL },
- { "ST34342A" , NULL },
- { NULL , NULL }
-};
-
-static const struct drive_list_entry drive_blacklist[] = {
- { "WDC AC11000H" , NULL },
- { "WDC AC22100H" , NULL },
- { "WDC AC32500H" , NULL },
- { "WDC AC33100H" , NULL },
- { "WDC AC31600H" , NULL },
- { "WDC AC32100H" , "24.09P07" },
- { "WDC AC23200L" , "21.10N21" },
- { "Compaq CRD-8241B" , NULL },
- { "CRD-8400B" , NULL },
- { "CRD-8480B", NULL },
- { "CRD-8482B", NULL },
- { "CRD-84" , NULL },
- { "SanDisk SDP3B" , NULL },
- { "SanDisk SDP3B-64" , NULL },
- { "SANYO CD-ROM CRD" , NULL },
- { "HITACHI CDR-8" , NULL },
- { "HITACHI CDR-8335" , NULL },
- { "HITACHI CDR-8435" , NULL },
- { "Toshiba CD-ROM XM-6202B" , NULL },
- { "TOSHIBA CD-ROM XM-1702BC", NULL },
- { "CD-532E-A" , NULL },
- { "E-IDE CD-ROM CR-840", NULL },
- { "CD-ROM Drive/F5A", NULL },
- { "WPI CDD-820", NULL },
- { "SAMSUNG CD-ROM SC-148C", NULL },
- { "SAMSUNG CD-ROM SC", NULL },
- { "ATAPI CD-ROM DRIVE 40X MAXIMUM", NULL },
- { "_NEC DV5800A", NULL },
- { "SAMSUNG CD-ROM SN-124", "N001" },
- { "Seagate STT20000A", NULL },
- { "CD-ROM CDR_U200", "1.09" },
- { NULL , NULL }
-
-};
-
-/**
- * ide_dma_intr - IDE DMA interrupt handler
- * @drive: the drive the interrupt is for
- *
- * Handle an interrupt completing a read/write DMA transfer on an
- * IDE device
- */
-
-ide_startstop_t ide_dma_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_cmd *cmd = &hwif->cmd;
- u8 stat = 0, dma_stat = 0;
-
- drive->waiting_for_dma = 0;
- dma_stat = hwif->dma_ops->dma_end(drive);
- ide_dma_unmap_sg(drive, cmd);
- stat = hwif->tp_ops->read_status(hwif);
-
- if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) {
- if (!dma_stat) {
- if ((cmd->tf_flags & IDE_TFLAG_FS) == 0)
- ide_finish_cmd(drive, cmd, stat);
- else
- ide_complete_rq(drive, BLK_STS_OK,
- blk_rq_sectors(cmd->rq) << 9);
- return ide_stopped;
- }
- printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
- drive->name, __func__, dma_stat);
- }
- return ide_error(drive, "dma_intr", stat);
-}
-
-int ide_dma_good_drive(ide_drive_t *drive)
-{
- return ide_in_drive_list(drive->id, drive_whitelist);
-}
-
-/**
- * ide_dma_map_sg - map IDE scatter gather for DMA I/O
- * @drive: the drive to map the DMA table for
- * @cmd: command
- *
- * Perform the DMA mapping magic necessary to access the source or
- * target buffers of a request via DMA. The lower layers of the
- * kernel provide the necessary cache management so that we can
- * operate in a portable fashion.
- */
-
-static int ide_dma_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct scatterlist *sg = hwif->sg_table;
- int i;
-
- if (cmd->tf_flags & IDE_TFLAG_WRITE)
- cmd->sg_dma_direction = DMA_TO_DEVICE;
- else
- cmd->sg_dma_direction = DMA_FROM_DEVICE;
-
- i = dma_map_sg(hwif->dev, sg, cmd->sg_nents, cmd->sg_dma_direction);
- if (i) {
- cmd->orig_sg_nents = cmd->sg_nents;
- cmd->sg_nents = i;
- }
-
- return i;
-}
-
-/**
- * ide_dma_unmap_sg - clean up DMA mapping
- * @drive: The drive to unmap
- *
- * Teardown mappings after DMA has completed. This must be called
- * after the completion of each use of ide_build_dmatable and before
- * the next use of ide_build_dmatable. Failure to do so will cause
- * an oops as only one mapping can be live for each target at a given
- * time.
- */
-
-void ide_dma_unmap_sg(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- dma_unmap_sg(hwif->dev, hwif->sg_table, cmd->orig_sg_nents,
- cmd->sg_dma_direction);
-}
-EXPORT_SYMBOL_GPL(ide_dma_unmap_sg);
-
-/**
- * ide_dma_off_quietly - Generic DMA kill
- * @drive: drive to control
- *
- * Turn off the current DMA on this IDE controller.
- */
-
-void ide_dma_off_quietly(ide_drive_t *drive)
-{
- drive->dev_flags &= ~IDE_DFLAG_USING_DMA;
-
- drive->hwif->dma_ops->dma_host_set(drive, 0);
-}
-EXPORT_SYMBOL(ide_dma_off_quietly);
-
-/**
- * ide_dma_off - disable DMA on a device
- * @drive: drive to disable DMA on
- *
- * Disable IDE DMA for a device on this IDE controller.
- * Inform the user that DMA has been disabled.
- */
-
-void ide_dma_off(ide_drive_t *drive)
-{
- printk(KERN_INFO "%s: DMA disabled\n", drive->name);
- ide_dma_off_quietly(drive);
-}
-EXPORT_SYMBOL(ide_dma_off);
-
-/**
- * ide_dma_on - Enable DMA on a device
- * @drive: drive to enable DMA on
- *
- * Enable IDE DMA for a device on this IDE controller.
- */
-
-void ide_dma_on(ide_drive_t *drive)
-{
- drive->dev_flags |= IDE_DFLAG_USING_DMA;
-
- drive->hwif->dma_ops->dma_host_set(drive, 1);
-}
-
-int __ide_dma_bad_drive(ide_drive_t *drive)
-{
- u16 *id = drive->id;
-
- int blacklist = ide_in_drive_list(id, drive_blacklist);
- if (blacklist) {
- printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n",
- drive->name, (char *)&id[ATA_ID_PROD]);
- return blacklist;
- }
- return 0;
-}
-EXPORT_SYMBOL(__ide_dma_bad_drive);
-
-static const u8 xfer_mode_bases[] = {
- XFER_UDMA_0,
- XFER_MW_DMA_0,
- XFER_SW_DMA_0,
-};
-
-static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
-{
- u16 *id = drive->id;
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- unsigned int mask = 0;
-
- switch (base) {
- case XFER_UDMA_0:
- if ((id[ATA_ID_FIELD_VALID] & 4) == 0)
- break;
- mask = id[ATA_ID_UDMA_MODES];
- if (port_ops && port_ops->udma_filter)
- mask &= port_ops->udma_filter(drive);
- else
- mask &= hwif->ultra_mask;
-
- /*
- * avoid false cable warning from eighty_ninty_three()
- */
- if (req_mode > XFER_UDMA_2) {
- if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
- mask &= 0x07;
- }
- break;
- case XFER_MW_DMA_0:
- mask = id[ATA_ID_MWDMA_MODES];
-
- /* Also look for the CF specific MWDMA modes... */
- if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 0x38)) {
- u8 mode = ((id[ATA_ID_CFA_MODES] & 0x38) >> 3) - 1;
-
- mask |= ((2 << mode) - 1) << 3;
- }
-
- if (port_ops && port_ops->mdma_filter)
- mask &= port_ops->mdma_filter(drive);
- else
- mask &= hwif->mwdma_mask;
- break;
- case XFER_SW_DMA_0:
- mask = id[ATA_ID_SWDMA_MODES];
- if (!(mask & ATA_SWDMA2) && (id[ATA_ID_OLD_DMA_MODES] >> 8)) {
- u8 mode = id[ATA_ID_OLD_DMA_MODES] >> 8;
-
- /*
- * if the mode is valid convert it to the mask
- * (the maximum allowed mode is XFER_SW_DMA_2)
- */
- if (mode <= 2)
- mask = (2 << mode) - 1;
- }
- mask &= hwif->swdma_mask;
- break;
- default:
- BUG();
- break;
- }
-
- return mask;
-}
-
-/**
- * ide_find_dma_mode - compute DMA speed
- * @drive: IDE device
- * @req_mode: requested mode
- *
- * Checks the drive/host capabilities and finds the speed to use for
- * the DMA transfer. The speed is then limited by the requested mode.
- *
- * Returns 0 if the drive/host combination is incapable of DMA transfers
- * or if the requested mode is not a DMA mode.
- */
-
-u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned int mask;
- int x, i;
- u8 mode = 0;
-
- if (drive->media != ide_disk) {
- if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) {
- if (req_mode < xfer_mode_bases[i])
- continue;
- mask = ide_get_mode_mask(drive, xfer_mode_bases[i], req_mode);
- x = fls(mask) - 1;
- if (x >= 0) {
- mode = xfer_mode_bases[i] + x;
- break;
- }
- }
-
- if (hwif->chipset == ide_acorn && mode == 0) {
- /*
- * is this correct?
- */
- if (ide_dma_good_drive(drive) &&
- drive->id[ATA_ID_EIDE_DMA_TIME] < 150)
- mode = XFER_MW_DMA_1;
- }
-
- mode = min(mode, req_mode);
-
- printk(KERN_INFO "%s: %s mode selected\n", drive->name,
- mode ? ide_xfer_verbose(mode) : "no DMA");
-
- return mode;
-}
-
-static int ide_tune_dma(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 speed;
-
- if (ata_id_has_dma(drive->id) == 0 ||
- (drive->dev_flags & IDE_DFLAG_NODMA))
- return 0;
-
- /* consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- return 0;
-
- if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
- return config_drive_for_dma(drive);
-
- speed = ide_max_dma_mode(drive);
-
- if (!speed)
- return 0;
-
- if (ide_set_dma_mode(drive, speed))
- return 0;
-
- return 1;
-}
-
-static int ide_dma_check(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- if (ide_tune_dma(drive))
- return 0;
-
- /* TODO: always do PIO fallback */
- if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
- return -1;
-
- ide_set_max_pio(drive);
-
- return -1;
-}
-
-int ide_set_dma(ide_drive_t *drive)
-{
- int rc;
-
- /*
- * Force DMAing for the beginning of the check.
- * Some chipsets appear to do interesting
- * things, if not checked and cleared.
- * PARANOIA!!!
- */
- ide_dma_off_quietly(drive);
-
- rc = ide_dma_check(drive);
- if (rc)
- return rc;
-
- ide_dma_on(drive);
-
- return 0;
-}
-
-void ide_check_dma_crc(ide_drive_t *drive)
-{
- u8 mode;
-
- ide_dma_off_quietly(drive);
- drive->crc_count = 0;
- mode = drive->current_speed;
- /*
- * Don't try non Ultra-DMA modes without iCRC's. Force the
- * device to PIO and make the user enable SWDMA/MWDMA modes.
- */
- if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
- mode--;
- else
- mode = XFER_PIO_4;
- ide_set_xfer_rate(drive, mode);
- if (drive->current_speed >= XFER_SW_DMA_0)
- ide_dma_on(drive);
-}
-
-void ide_dma_lost_irq(ide_drive_t *drive)
-{
- printk(KERN_ERR "%s: DMA interrupt recovery\n", drive->name);
-}
-EXPORT_SYMBOL_GPL(ide_dma_lost_irq);
-
-/*
- * un-busy the port etc, and clear any pending DMA status. we want to
- * retry the current request in pio mode instead of risking tossing it
- * all away
- */
-ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_dma_ops *dma_ops = hwif->dma_ops;
- struct ide_cmd *cmd = &hwif->cmd;
- ide_startstop_t ret = ide_stopped;
-
- /*
- * end current dma transaction
- */
-
- if (error < 0) {
- printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
- drive->waiting_for_dma = 0;
- (void)dma_ops->dma_end(drive);
- ide_dma_unmap_sg(drive, cmd);
- ret = ide_error(drive, "dma timeout error",
- hwif->tp_ops->read_status(hwif));
- } else {
- printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
- if (dma_ops->dma_clear)
- dma_ops->dma_clear(drive);
- printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name);
- if (dma_ops->dma_test_irq(drive) == 0) {
- ide_dump_status(drive, "DMA timeout",
- hwif->tp_ops->read_status(hwif));
- drive->waiting_for_dma = 0;
- (void)dma_ops->dma_end(drive);
- ide_dma_unmap_sg(drive, cmd);
- }
- }
-
- /*
- * disable dma for now, but remember that we did so because of
- * a timeout -- we'll reenable after we finish this next request
- * (or rather the first chunk of it) in pio.
- */
- drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
- drive->retry_pio++;
- ide_dma_off_quietly(drive);
-
- /*
- * make sure request is sane
- */
- if (hwif->rq)
- scsi_req(hwif->rq)->result = 0;
- return ret;
-}
-
-void ide_release_dma_engine(ide_hwif_t *hwif)
-{
- if (hwif->dmatable_cpu) {
- int prd_size = hwif->prd_max_nents * hwif->prd_ent_size;
-
- dma_free_coherent(hwif->dev, prd_size,
- hwif->dmatable_cpu, hwif->dmatable_dma);
- hwif->dmatable_cpu = NULL;
- }
-}
-EXPORT_SYMBOL_GPL(ide_release_dma_engine);
-
-int ide_allocate_dma_engine(ide_hwif_t *hwif)
-{
- int prd_size;
-
- if (hwif->prd_max_nents == 0)
- hwif->prd_max_nents = PRD_ENTRIES;
- if (hwif->prd_ent_size == 0)
- hwif->prd_ent_size = PRD_BYTES;
-
- prd_size = hwif->prd_max_nents * hwif->prd_ent_size;
-
- hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev, prd_size,
- &hwif->dmatable_dma,
- GFP_ATOMIC);
- if (hwif->dmatable_cpu == NULL) {
- printk(KERN_ERR "%s: unable to allocate PRD table\n",
- hwif->name);
- return -ENOMEM;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_allocate_dma_engine);
-
-int ide_dma_prepare(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- const struct ide_dma_ops *dma_ops = drive->hwif->dma_ops;
-
- if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 ||
- (dma_ops->dma_check && dma_ops->dma_check(drive, cmd)))
- goto out;
- ide_map_sg(drive, cmd);
- if (ide_dma_map_sg(drive, cmd) == 0)
- goto out_map;
- if (dma_ops->dma_setup(drive, cmd))
- goto out_dma_unmap;
- drive->waiting_for_dma = 1;
- return 0;
-out_dma_unmap:
- ide_dma_unmap_sg(drive, cmd);
-out_map:
- ide_map_sg(drive, cmd);
-out:
- return 1;
-}
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
deleted file mode 100644
index 2f378213e9b5..000000000000
--- a/drivers/ide/ide-eh.c
+++ /dev/null
@@ -1,443 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ide.h>
-#include <linux/delay.h>
-
-static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq,
- u8 stat, u8 err)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- if ((stat & ATA_BUSY) ||
- ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
- /* other bits are useless when BUSY */
- scsi_req(rq)->result |= ERROR_RESET;
- } else if (stat & ATA_ERR) {
- /* err has different meaning on cdrom and tape */
- if (err == ATA_ABORTED) {
- if ((drive->dev_flags & IDE_DFLAG_LBA) &&
- /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
- hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
- return ide_stopped;
- } else if ((err & BAD_CRC) == BAD_CRC) {
- /* UDMA crc error, just retry the operation */
- drive->crc_count++;
- } else if (err & (ATA_BBK | ATA_UNC)) {
- /* retries won't help these */
- scsi_req(rq)->result = ERROR_MAX;
- } else if (err & ATA_TRK0NF) {
- /* help it find track zero */
- scsi_req(rq)->result |= ERROR_RECAL;
- }
- }
-
- if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
- (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
- int nsect = drive->mult_count ? drive->mult_count : 1;
-
- ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE);
- }
-
- if (scsi_req(rq)->result >= ERROR_MAX || blk_noretry_request(rq)) {
- ide_kill_rq(drive, rq);
- return ide_stopped;
- }
-
- if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
- scsi_req(rq)->result |= ERROR_RESET;
-
- if ((scsi_req(rq)->result & ERROR_RESET) == ERROR_RESET) {
- ++scsi_req(rq)->result;
- return ide_do_reset(drive);
- }
-
- if ((scsi_req(rq)->result & ERROR_RECAL) == ERROR_RECAL)
- drive->special_flags |= IDE_SFLAG_RECALIBRATE;
-
- ++scsi_req(rq)->result;
-
- return ide_stopped;
-}
-
-static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq,
- u8 stat, u8 err)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- if ((stat & ATA_BUSY) ||
- ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
- /* other bits are useless when BUSY */
- scsi_req(rq)->result |= ERROR_RESET;
- } else {
- /* add decoding error stuff */
- }
-
- if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
- /* force an abort */
- hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
-
- if (scsi_req(rq)->result >= ERROR_MAX) {
- ide_kill_rq(drive, rq);
- } else {
- if ((scsi_req(rq)->result & ERROR_RESET) == ERROR_RESET) {
- ++scsi_req(rq)->result;
- return ide_do_reset(drive);
- }
- ++scsi_req(rq)->result;
- }
-
- return ide_stopped;
-}
-
-static ide_startstop_t __ide_error(ide_drive_t *drive, struct request *rq,
- u8 stat, u8 err)
-{
- if (drive->media == ide_disk)
- return ide_ata_error(drive, rq, stat, err);
- return ide_atapi_error(drive, rq, stat, err);
-}
-
-/**
- * ide_error - handle an error on the IDE
- * @drive: drive the error occurred on
- * @msg: message to report
- * @stat: status bits
- *
- * ide_error() takes action based on the error returned by the drive.
- * For normal I/O that may well include retries. We deal with
- * both new-style (taskfile) and old style command handling here.
- * In the case of taskfile command handling there is work left to
- * do
- */
-
-ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat)
-{
- struct request *rq;
- u8 err;
-
- err = ide_dump_status(drive, msg, stat);
-
- rq = drive->hwif->rq;
- if (rq == NULL)
- return ide_stopped;
-
- /* retry only "normal" I/O: */
- if (blk_rq_is_passthrough(rq)) {
- if (ata_taskfile_request(rq)) {
- struct ide_cmd *cmd = ide_req(rq)->special;
-
- if (cmd)
- ide_complete_cmd(drive, cmd, stat, err);
- } else if (ata_pm_request(rq)) {
- scsi_req(rq)->result = 1;
- ide_complete_pm_rq(drive, rq);
- return ide_stopped;
- }
- scsi_req(rq)->result = err;
- ide_complete_rq(drive, err ? BLK_STS_IOERR : BLK_STS_OK, blk_rq_bytes(rq));
- return ide_stopped;
- }
-
- return __ide_error(drive, rq, stat, err);
-}
-EXPORT_SYMBOL_GPL(ide_error);
-
-static inline void ide_complete_drive_reset(ide_drive_t *drive, blk_status_t err)
-{
- struct request *rq = drive->hwif->rq;
-
- if (rq && ata_misc_request(rq) &&
- scsi_req(rq)->cmd[0] == REQ_DRIVE_RESET) {
- if (err <= 0 && scsi_req(rq)->result == 0)
- scsi_req(rq)->result = -EIO;
- ide_complete_rq(drive, err, blk_rq_bytes(rq));
- }
-}
-
-/* needed below */
-static ide_startstop_t do_reset1(ide_drive_t *, int);
-
-/*
- * atapi_reset_pollfunc() gets invoked to poll the interface for completion
- * every 50ms during an atapi drive reset operation. If the drive has not yet
- * responded, and we have not yet hit our maximum waiting time, then the timer
- * is restarted for another 50ms.
- */
-static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- u8 stat;
-
- tp_ops->dev_select(drive);
- udelay(10);
- stat = tp_ops->read_status(hwif);
-
- if (OK_STAT(stat, 0, ATA_BUSY))
- printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name);
- else {
- if (time_before(jiffies, hwif->poll_timeout)) {
- ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20);
- /* continue polling */
- return ide_started;
- }
- /* end of polling */
- hwif->polling = 0;
- printk(KERN_ERR "%s: ATAPI reset timed-out, status=0x%02x\n",
- drive->name, stat);
- /* do it the old fashioned way */
- return do_reset1(drive, 1);
- }
- /* done polling */
- hwif->polling = 0;
- ide_complete_drive_reset(drive, BLK_STS_OK);
- return ide_stopped;
-}
-
-static void ide_reset_report_error(ide_hwif_t *hwif, u8 err)
-{
- static const char *err_master_vals[] =
- { NULL, "passed", "formatter device error",
- "sector buffer error", "ECC circuitry error",
- "controlling MPU error" };
-
- u8 err_master = err & 0x7f;
-
- printk(KERN_ERR "%s: reset: master: ", hwif->name);
- if (err_master && err_master < 6)
- printk(KERN_CONT "%s", err_master_vals[err_master]);
- else
- printk(KERN_CONT "error (0x%02x?)", err);
- if (err & 0x80)
- printk(KERN_CONT "; slave: failed");
- printk(KERN_CONT "\n");
-}
-
-/*
- * reset_pollfunc() gets invoked to poll the interface for completion every 50ms
- * during an ide reset operation. If the drives have not yet responded,
- * and we have not yet hit our maximum waiting time, then the timer is restarted
- * for another 50ms.
- */
-static ide_startstop_t reset_pollfunc(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- u8 tmp;
- blk_status_t err = BLK_STS_OK;
-
- if (port_ops && port_ops->reset_poll) {
- err = port_ops->reset_poll(drive);
- if (err) {
- printk(KERN_ERR "%s: host reset_poll failure for %s.\n",
- hwif->name, drive->name);
- goto out;
- }
- }
-
- tmp = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(tmp, 0, ATA_BUSY)) {
- if (time_before(jiffies, hwif->poll_timeout)) {
- ide_set_handler(drive, &reset_pollfunc, HZ/20);
- /* continue polling */
- return ide_started;
- }
- printk(KERN_ERR "%s: reset timed-out, status=0x%02x\n",
- hwif->name, tmp);
- drive->failures++;
- err = BLK_STS_IOERR;
- } else {
- tmp = ide_read_error(drive);
-
- if (tmp == 1) {
- printk(KERN_INFO "%s: reset: success\n", hwif->name);
- drive->failures = 0;
- } else {
- ide_reset_report_error(hwif, tmp);
- drive->failures++;
- err = BLK_STS_IOERR;
- }
- }
-out:
- hwif->polling = 0; /* done polling */
- ide_complete_drive_reset(drive, err);
- return ide_stopped;
-}
-
-static void ide_disk_pre_reset(ide_drive_t *drive)
-{
- int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;
-
- drive->special_flags =
- legacy ? (IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE) : 0;
-
- drive->mult_count = 0;
- drive->dev_flags &= ~IDE_DFLAG_PARKED;
-
- if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
- drive->mult_req = 0;
-
- if (drive->mult_req != drive->mult_count)
- drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
-}
-
-static void pre_reset(ide_drive_t *drive)
-{
- const struct ide_port_ops *port_ops = drive->hwif->port_ops;
-
- if (drive->media == ide_disk)
- ide_disk_pre_reset(drive);
- else
- drive->dev_flags |= IDE_DFLAG_POST_RESET;
-
- if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
- if (drive->crc_count)
- ide_check_dma_crc(drive);
- else
- ide_dma_off(drive);
- }
-
- if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
- if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
- drive->dev_flags &= ~IDE_DFLAG_UNMASK;
- drive->io_32bit = 0;
- }
- return;
- }
-
- if (port_ops && port_ops->pre_reset)
- port_ops->pre_reset(drive);
-
- if (drive->current_speed != 0xff)
- drive->desired_speed = drive->current_speed;
- drive->current_speed = 0xff;
-}
-
-/*
- * do_reset1() attempts to recover a confused drive by resetting it.
- * Unfortunately, resetting a disk drive actually resets all devices on
- * the same interface, so it can really be thought of as resetting the
- * interface rather than resetting the drive.
- *
- * ATAPI devices have their own reset mechanism which allows them to be
- * individually reset without clobbering other devices on the same interface.
- *
- * Unfortunately, the IDE interface does not generate an interrupt to let
- * us know when the reset operation has finished, so we must poll for this.
- * Equally poor, though, is the fact that this may a very long time to complete,
- * (up to 30 seconds worstcase). So, instead of busy-waiting here for it,
- * we set a timer to poll at 50ms intervals.
- */
-static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- const struct ide_port_ops *port_ops;
- ide_drive_t *tdrive;
- unsigned long flags, timeout;
- int i;
- DEFINE_WAIT(wait);
-
- spin_lock_irqsave(&hwif->lock, flags);
-
- /* We must not reset with running handlers */
- BUG_ON(hwif->handler != NULL);
-
- /* For an ATAPI device, first try an ATAPI SRST. */
- if (drive->media != ide_disk && !do_not_try_atapi) {
- pre_reset(drive);
- tp_ops->dev_select(drive);
- udelay(20);
- tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
- ndelay(400);
- hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
- hwif->polling = 1;
- __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20);
- spin_unlock_irqrestore(&hwif->lock, flags);
- return ide_started;
- }
-
- /* We must not disturb devices in the IDE_DFLAG_PARKED state. */
- do {
- unsigned long now;
-
- prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
- timeout = jiffies;
- ide_port_for_each_present_dev(i, tdrive, hwif) {
- if ((tdrive->dev_flags & IDE_DFLAG_PARKED) &&
- time_after(tdrive->sleep, timeout))
- timeout = tdrive->sleep;
- }
-
- now = jiffies;
- if (time_before_eq(timeout, now))
- break;
-
- spin_unlock_irqrestore(&hwif->lock, flags);
- timeout = schedule_timeout_uninterruptible(timeout - now);
- spin_lock_irqsave(&hwif->lock, flags);
- } while (timeout);
- finish_wait(&ide_park_wq, &wait);
-
- /*
- * First, reset any device state data we were maintaining
- * for any of the drives on this interface.
- */
- ide_port_for_each_dev(i, tdrive, hwif)
- pre_reset(tdrive);
-
- if (io_ports->ctl_addr == 0) {
- spin_unlock_irqrestore(&hwif->lock, flags);
- ide_complete_drive_reset(drive, BLK_STS_IOERR);
- return ide_stopped;
- }
-
- /*
- * Note that we also set nIEN while resetting the device,
- * to mask unwanted interrupts from the interface during the reset.
- * However, due to the design of PC hardware, this will cause an
- * immediate interrupt due to the edge transition it produces.
- * This single interrupt gives us a "fast poll" for drives that
- * recover from reset very quickly, saving us the first 50ms wait time.
- */
- /* set SRST and nIEN */
- tp_ops->write_devctl(hwif, ATA_SRST | ATA_NIEN | ATA_DEVCTL_OBS);
- /* more than enough time */
- udelay(10);
- /* clear SRST, leave nIEN (unless device is on the quirk list) */
- tp_ops->write_devctl(hwif,
- ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) ? 0 : ATA_NIEN) |
- ATA_DEVCTL_OBS);
- /* more than enough time */
- udelay(10);
- hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
- hwif->polling = 1;
- __ide_set_handler(drive, &reset_pollfunc, HZ/20);
-
- /*
- * Some weird controller like resetting themselves to a strange
- * state when the disks are reset this way. At least, the Winbond
- * 553 documentation says that
- */
- port_ops = hwif->port_ops;
- if (port_ops && port_ops->resetproc)
- port_ops->resetproc(drive);
-
- spin_unlock_irqrestore(&hwif->lock, flags);
- return ide_started;
-}
-
-/*
- * ide_do_reset() is the entry point to the drive/interface reset code.
- */
-
-ide_startstop_t ide_do_reset(ide_drive_t *drive)
-{
- return do_reset1(drive, 0);
-}
-EXPORT_SYMBOL(ide_do_reset);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
deleted file mode 100644
index f5a2870aaf54..000000000000
--- a/drivers/ide/ide-floppy.c
+++ /dev/null
@@ -1,551 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * IDE ATAPI floppy driver.
- *
- * Copyright (C) 1996-1999 Gadi Oxman <gadio@...vision.net.il>
- * Copyright (C) 2000-2002 Paul Bristow <paul@...lbristow.net>
- * Copyright (C) 2005 Bartlomiej Zolnierkiewicz
- *
- * This driver supports the following IDE floppy drives:
- *
- * LS-120/240 SuperDisk
- * Iomega Zip 100/250
- * Iomega PC Card Clik!/PocketZip
- *
- * For a historical changelog see
- * Documentation/ide/ChangeLog.ide-floppy.1996-2002
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/compat.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/cdrom.h>
-#include <linux/ide.h>
-#include <linux/hdreg.h>
-#include <linux/bitops.h>
-#include <linux/mutex.h>
-#include <linux/scatterlist.h>
-
-#include <scsi/scsi_ioctl.h>
-
-#include <asm/byteorder.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <asm/unaligned.h>
-
-#include "ide-floppy.h"
-
-/*
- * After each failed packet command we issue a request sense command and retry
- * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
- */
-#define IDEFLOPPY_MAX_PC_RETRIES 3
-
-/* format capacities descriptor codes */
-#define CAPACITY_INVALID 0x00
-#define CAPACITY_UNFORMATTED 0x01
-#define CAPACITY_CURRENT 0x02
-#define CAPACITY_NO_CARTRIDGE 0x03
-
-/*
- * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
- * was apparently being deasserted before the unit was ready to receive data.
- */
-#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
-
-static int ide_floppy_callback(ide_drive_t *drive, int dsc)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = drive->pc;
- struct request *rq = pc->rq;
- int uptodate = pc->error ? 0 : 1;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- if (drive->failed_pc == pc)
- drive->failed_pc = NULL;
-
- if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
- blk_rq_is_scsi(rq))
- uptodate = 1; /* FIXME */
- else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
-
- u8 *buf = bio_data(rq->bio);
-
- if (!pc->error) {
- floppy->sense_key = buf[2] & 0x0F;
- floppy->asc = buf[12];
- floppy->ascq = buf[13];
- floppy->progress_indication = buf[15] & 0x80 ?
- (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
-
- if (drive->failed_pc)
- ide_debug_log(IDE_DBG_PC, "pc = %x",
- drive->failed_pc->c[0]);
-
- ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
- "ascq = %x", floppy->sense_key,
- floppy->asc, floppy->ascq);
- } else
- printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
- "Aborting request!\n");
- }
-
- if (ata_misc_request(rq))
- scsi_req(rq)->result = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
-
- return uptodate;
-}
-
-static void ide_floppy_report_error(struct ide_disk_obj *floppy,
- struct ide_atapi_pc *pc)
-{
- /* suppress error messages resulting from Medium not present */
- if (floppy->sense_key == 0x02 &&
- floppy->asc == 0x3a &&
- floppy->ascq == 0x00)
- return;
-
- printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
- "asc = %2x, ascq = %2x\n",
- floppy->drive->name, pc->c[0], floppy->sense_key,
- floppy->asc, floppy->ascq);
-
-}
-
-static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
- struct ide_cmd *cmd,
- struct ide_atapi_pc *pc)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
-
- if (drive->failed_pc == NULL &&
- pc->c[0] != GPCMD_REQUEST_SENSE)
- drive->failed_pc = pc;
-
- /* Set the current packet command */
- drive->pc = pc;
-
- if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
- unsigned int done = blk_rq_bytes(drive->hwif->rq);
-
- if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
- ide_floppy_report_error(floppy, pc);
-
- /* Giving up */
- pc->error = IDE_DRV_ERROR_GENERAL;
-
- drive->failed_pc = NULL;
- drive->pc_callback(drive, 0);
- ide_complete_rq(drive, BLK_STS_IOERR, done);
- return ide_stopped;
- }
-
- ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries);
-
- pc->retries++;
-
- return ide_issue_pc(drive, cmd);
-}
-
-void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
- pc->c[7] = 255;
- pc->c[8] = 255;
- pc->req_xfer = 255;
-}
-
-/* A mode sense command is used to "sense" floppy parameters. */
-void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
-{
- u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
-
- ide_init_pc(pc);
- pc->c[0] = GPCMD_MODE_SENSE_10;
- pc->c[1] = 0;
- pc->c[2] = page_code;
-
- switch (page_code) {
- case IDEFLOPPY_CAPABILITIES_PAGE:
- length += 12;
- break;
- case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
- length += 32;
- break;
- default:
- printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
- }
- put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
- pc->req_xfer = length;
-}
-
-static void idefloppy_create_rw_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, struct request *rq,
- unsigned long sector)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- int block = sector / floppy->bs_factor;
- int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
- int cmd = rq_data_dir(rq);
-
- ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
-
- ide_init_pc(pc);
- pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
- put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
- put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
-
- memcpy(scsi_req(rq)->cmd, pc->c, 12);
-
- pc->rq = rq;
- if (cmd == WRITE)
- pc->flags |= PC_FLAG_WRITING;
-
- pc->flags |= PC_FLAG_DMA_OK;
-}
-
-static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
- struct ide_atapi_pc *pc, struct request *rq)
-{
- ide_init_pc(pc);
- memcpy(pc->c, scsi_req(rq)->cmd, sizeof(pc->c));
- pc->rq = rq;
- if (blk_rq_bytes(rq)) {
- pc->flags |= PC_FLAG_DMA_OK;
- if (rq_data_dir(rq) == WRITE)
- pc->flags |= PC_FLAG_WRITING;
- }
-}
-
-static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
- struct request *rq, sector_t block)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_cmd cmd;
- struct ide_atapi_pc *pc;
-
- ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]);
-
- if (drive->debug_mask & IDE_DBG_RQ)
- blk_dump_rq_flags(rq, (rq->rq_disk
- ? rq->rq_disk->disk_name
- : "dev?"));
-
- if (scsi_req(rq)->result >= ERROR_MAX) {
- if (drive->failed_pc) {
- ide_floppy_report_error(floppy, drive->failed_pc);
- drive->failed_pc = NULL;
- } else
- printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
-
- if (ata_misc_request(rq)) {
- scsi_req(rq)->result = 0;
- ide_complete_rq(drive, BLK_STS_OK, blk_rq_bytes(rq));
- return ide_stopped;
- } else
- goto out_end;
- }
-
- switch (req_op(rq)) {
- default:
- if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
- (blk_rq_sectors(rq) % floppy->bs_factor)) {
- printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
- drive->name);
- goto out_end;
- }
- pc = &floppy->queued_pc;
- idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
- break;
- case REQ_OP_SCSI_IN:
- case REQ_OP_SCSI_OUT:
- pc = &floppy->queued_pc;
- idefloppy_blockpc_cmd(floppy, pc, rq);
- break;
- case REQ_OP_DRV_IN:
- case REQ_OP_DRV_OUT:
- switch (ide_req(rq)->type) {
- case ATA_PRIV_MISC:
- case ATA_PRIV_SENSE:
- pc = (struct ide_atapi_pc *)ide_req(rq)->special;
- break;
- default:
- BUG();
- }
- }
-
- ide_prep_sense(drive, rq);
-
- memset(&cmd, 0, sizeof(cmd));
-
- if (rq_data_dir(rq))
- cmd.tf_flags |= IDE_TFLAG_WRITE;
-
- cmd.rq = rq;
-
- if (!blk_rq_is_passthrough(rq) || blk_rq_bytes(rq)) {
- ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
- ide_map_sg(drive, &cmd);
- }
-
- pc->rq = rq;
-
- return ide_floppy_issue_pc(drive, &cmd, pc);
-out_end:
- drive->failed_pc = NULL;
- if (blk_rq_is_passthrough(rq) && scsi_req(rq)->result == 0)
- scsi_req(rq)->result = -EIO;
- ide_complete_rq(drive, BLK_STS_IOERR, blk_rq_bytes(rq));
- return ide_stopped;
-}
-
-/*
- * Look at the flexible disk page parameters. We ignore the CHS capacity
- * parameters and use the LBA parameters instead.
- */
-static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
- struct ide_atapi_pc *pc)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- struct gendisk *disk = floppy->disk;
- u8 *page, buf[40];
- int capacity, lba_capacity;
- u16 transfer_rate, sector_size, cyls, rpm;
- u8 heads, sectors;
-
- ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
-
- if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
- printk(KERN_ERR PFX "Can't get flexible disk page params\n");
- return 1;
- }
-
- if (buf[3] & 0x80)
- drive->dev_flags |= IDE_DFLAG_WP;
- else
- drive->dev_flags &= ~IDE_DFLAG_WP;
-
- set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
-
- page = &buf[8];
-
- transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
- sector_size = be16_to_cpup((__be16 *)&buf[8 + 6]);
- cyls = be16_to_cpup((__be16 *)&buf[8 + 8]);
- rpm = be16_to_cpup((__be16 *)&buf[8 + 28]);
- heads = buf[8 + 4];
- sectors = buf[8 + 5];
-
- capacity = cyls * heads * sectors * sector_size;
-
- if (memcmp(page, &floppy->flexible_disk_page, 32))
- printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
- "%d sector size, %d rpm\n",
- drive->name, capacity / 1024, cyls, heads,
- sectors, transfer_rate / 8, sector_size, rpm);
-
- memcpy(&floppy->flexible_disk_page, page, 32);
- drive->bios_cyl = cyls;
- drive->bios_head = heads;
- drive->bios_sect = sectors;
- lba_capacity = floppy->blocks * floppy->block_size;
-
- if (capacity < lba_capacity) {
- printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
- "bytes, but the drive only handles %d\n",
- drive->name, lba_capacity, capacity);
- floppy->blocks = floppy->block_size ?
- capacity / floppy->block_size : 0;
- drive->capacity64 = floppy->blocks * floppy->bs_factor;
- }
-
- return 0;
-}
-
-/*
- * Determine if a media is present in the floppy drive, and if so, its LBA
- * capacity.
- */
-static int ide_floppy_get_capacity(ide_drive_t *drive)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- struct gendisk *disk = floppy->disk;
- struct ide_atapi_pc pc;
- u8 *cap_desc;
- u8 pc_buf[256], header_len, desc_cnt;
- int i, rc = 1, blocks, length;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- drive->bios_cyl = 0;
- drive->bios_head = drive->bios_sect = 0;
- floppy->blocks = 0;
- floppy->bs_factor = 1;
- drive->capacity64 = 0;
-
- ide_floppy_create_read_capacity_cmd(&pc);
- if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
- printk(KERN_ERR PFX "Can't get floppy parameters\n");
- return 1;
- }
- header_len = pc_buf[3];
- cap_desc = &pc_buf[4];
- desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
-
- for (i = 0; i < desc_cnt; i++) {
- unsigned int desc_start = 4 + i*8;
-
- blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
-
- ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
- "%d sector size",
- i, blocks * length / 1024,
- blocks, length);
-
- if (i)
- continue;
- /*
- * the code below is valid only for the 1st descriptor, ie i=0
- */
-
- switch (pc_buf[desc_start + 4] & 0x03) {
- /* Clik! drive returns this instead of CAPACITY_CURRENT */
- case CAPACITY_UNFORMATTED:
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
- /*
- * If it is not a clik drive, break out
- * (maintains previous driver behaviour)
- */
- break;
- fallthrough;
- case CAPACITY_CURRENT:
- /* Normal Zip/LS-120 disks */
- if (memcmp(cap_desc, &floppy->cap_desc, 8))
- printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
- "sector size\n",
- drive->name, blocks * length / 1024,
- blocks, length);
- memcpy(&floppy->cap_desc, cap_desc, 8);
-
- if (!length || length % 512) {
- printk(KERN_NOTICE PFX "%s: %d bytes block size"
- " not supported\n", drive->name, length);
- } else {
- floppy->blocks = blocks;
- floppy->block_size = length;
- floppy->bs_factor = length / 512;
- if (floppy->bs_factor != 1)
- printk(KERN_NOTICE PFX "%s: Warning: "
- "non 512 bytes block size not "
- "fully supported\n",
- drive->name);
- drive->capacity64 =
- floppy->blocks * floppy->bs_factor;
- rc = 0;
- }
- break;
- case CAPACITY_NO_CARTRIDGE:
- /*
- * This is a KERN_ERR so it appears on screen
- * for the user to see
- */
- printk(KERN_ERR PFX "%s: No disk in drive\n",
- drive->name);
- break;
- case CAPACITY_INVALID:
- printk(KERN_ERR PFX "%s: Invalid capacity for disk "
- "in drive\n", drive->name);
- break;
- }
- ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
- pc_buf[desc_start + 4] & 0x03);
- }
-
- /* Clik! disk does not support get_flexible_disk_page */
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
- (void) ide_floppy_get_flexible_disk_page(drive, &pc);
-
- return rc;
-}
-
-static void ide_floppy_setup(ide_drive_t *drive)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- u16 *id = drive->id;
-
- drive->pc_callback = ide_floppy_callback;
-
- /*
- * We used to check revisions here. At this point however I'm giving up.
- * Just assume they are all broken, its easier.
- *
- * The actual reason for the workarounds was likely a driver bug after
- * all rather than a firmware bug, and the workaround below used to hide
- * it. It should be fixed as of version 1.9, but to be on the safe side
- * we'll leave the limitation below for the 2.2.x tree.
- */
- if (strstarts((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI")) {
- drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
- /* This value will be visible in the /proc/ide/hdx/settings */
- drive->pc_delay = IDEFLOPPY_PC_DELAY;
- blk_queue_max_hw_sectors(drive->queue, 64);
- }
-
- /*
- * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
- * nasty clicking noises without it, so please don't remove this.
- */
- if (strstarts((char *)&id[ATA_ID_PROD], "IOMEGA Clik!")) {
- blk_queue_max_hw_sectors(drive->queue, 64);
- drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
- /* IOMEGA Clik! drives do not support lock/unlock commands */
- drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
- }
-
- (void) ide_floppy_get_capacity(drive);
-
- ide_proc_register_driver(drive, floppy->driver);
-}
-
-static void ide_floppy_flush(ide_drive_t *drive)
-{
-}
-
-static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
-{
- int ret = 0;
-
- if (ide_do_test_unit_ready(drive, disk))
- ide_do_start_stop(drive, disk, 1);
-
- ret = ide_floppy_get_capacity(drive);
-
- set_capacity(disk, ide_gd_capacity(drive));
-
- return ret;
-}
-
-const struct ide_disk_ops ide_atapi_disk_ops = {
- .check = ide_check_atapi_device,
- .get_capacity = ide_floppy_get_capacity,
- .setup = ide_floppy_setup,
- .flush = ide_floppy_flush,
- .init_media = ide_floppy_init_media,
- .set_doorlock = ide_set_media_lock,
- .do_request = ide_floppy_do_request,
- .ioctl = ide_floppy_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = ide_floppy_compat_ioctl,
-#endif
-};
diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
deleted file mode 100644
index 8505a5f58f4e..000000000000
--- a/drivers/ide/ide-floppy.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __IDE_FLOPPY_H
-#define __IDE_FLOPPY_H
-
-#include "ide-gd.h"
-
-#ifdef CONFIG_IDE_GD_ATAPI
-/*
- * Pages of the SELECT SENSE / MODE SENSE packet commands.
- * See SFF-8070i spec.
- */
-#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
-#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
-
-/* IOCTLs used in low-level formatting. */
-#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
-#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
-#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
-#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
-
-/* ide-floppy.c */
-extern const struct ide_disk_ops ide_atapi_disk_ops;
-void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
-void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
-
-/* ide-floppy_ioctl.c */
-int ide_floppy_ioctl(ide_drive_t *, struct block_device *, fmode_t,
- unsigned int, unsigned long);
-int ide_floppy_compat_ioctl(ide_drive_t *, struct block_device *, fmode_t,
- unsigned int, unsigned long);
-
-#ifdef CONFIG_IDE_PROC_FS
-/* ide-floppy_proc.c */
-extern ide_proc_entry_t ide_floppy_proc[];
-extern const struct ide_proc_devset ide_floppy_settings[];
-#endif
-#else
-#define ide_floppy_proc NULL
-#define ide_floppy_settings NULL
-#endif
-
-#endif /*__IDE_FLOPPY_H */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
deleted file mode 100644
index 39a790ac6cc3..000000000000
--- a/drivers/ide/ide-floppy_ioctl.c
+++ /dev/null
@@ -1,339 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ide-floppy IOCTLs handling.
- */
-
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/compat.h>
-#include <linux/cdrom.h>
-#include <linux/mutex.h>
-
-#include <asm/unaligned.h>
-
-#include <scsi/scsi_ioctl.h>
-
-#include "ide-floppy.h"
-
-/*
- * Obtain the list of formattable capacities.
- * Very similar to ide_floppy_get_capacity, except that we push the capacity
- * descriptors to userland, instead of our own structures.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_capacities {
- * int nformats;
- * struct {
- * int nblocks;
- * int blocksize;
- * } formats[];
- * };
- *
- * userland initializes nformats to the number of allocated formats[] records.
- * On exit we set nformats to the number of records we've actually initialized.
- */
-
-static DEFINE_MUTEX(ide_floppy_ioctl_mutex);
-static int ide_floppy_get_format_capacities(ide_drive_t *drive,
- struct ide_atapi_pc *pc,
- int __user *arg)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- int i, blocks, length, u_array_size, u_index;
- int __user *argp;
- u8 pc_buf[256], header_len, desc_cnt;
-
- if (get_user(u_array_size, arg))
- return -EFAULT;
-
- if (u_array_size <= 0)
- return -EINVAL;
-
- ide_floppy_create_read_capacity_cmd(pc);
-
- if (ide_queue_pc_tail(drive, floppy->disk, pc, pc_buf, pc->req_xfer)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
- return -EIO;
- }
-
- header_len = pc_buf[3];
- desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
-
- u_index = 0;
- argp = arg + 1;
-
- /*
- * We always skip the first capacity descriptor. That's the current
- * capacity. We are interested in the remaining descriptors, the
- * formattable capacities.
- */
- for (i = 1; i < desc_cnt; i++) {
- unsigned int desc_start = 4 + i*8;
-
- if (u_index >= u_array_size)
- break; /* User-supplied buffer too small */
-
- blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
-
- if (put_user(blocks, argp))
- return -EFAULT;
-
- ++argp;
-
- if (put_user(length, argp))
- return -EFAULT;
-
- ++argp;
-
- ++u_index;
- }
-
- if (put_user(u_index, arg))
- return -EFAULT;
-
- return 0;
-}
-
-static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc,
- u8 *buf, int b, int l,
- int flags)
-{
- ide_init_pc(pc);
- pc->c[0] = GPCMD_FORMAT_UNIT;
- pc->c[1] = 0x17;
-
- memset(buf, 0, 12);
- buf[1] = 0xA2;
- /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
-
- if (flags & 1) /* Verify bit on... */
- buf[1] ^= 0x20; /* ... turn off DCRT bit */
- buf[3] = 8;
-
- put_unaligned(cpu_to_be32(b), (unsigned int *)(&buf[4]));
- put_unaligned(cpu_to_be32(l), (unsigned int *)(&buf[8]));
- pc->req_xfer = 12;
- pc->flags |= PC_FLAG_WRITING;
-}
-
-static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- u8 buf[20];
-
- drive->atapi_flags &= ~IDE_AFLAG_SRFP;
-
- ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
- pc->flags |= PC_FLAG_SUPPRESS_ERROR;
-
- if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer))
- return 1;
-
- if (buf[8 + 2] & 0x40)
- drive->atapi_flags |= IDE_AFLAG_SRFP;
-
- return 0;
-}
-
-static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
- int __user *arg)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- u8 buf[12];
- int blocks, length, flags, err = 0;
-
- if (floppy->openers > 1) {
- /* Don't format if someone is using the disk */
- drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
- return -EBUSY;
- }
-
- drive->dev_flags |= IDE_DFLAG_FORMAT_IN_PROGRESS;
-
- /*
- * Send ATAPI_FORMAT_UNIT to the drive.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_command {
- * int nblocks;
- * int blocksize;
- * int flags;
- * } ;
- *
- * flags is a bitmask, currently, the only defined flag is:
- *
- * 0x01 - verify media after format.
- */
- if (get_user(blocks, arg) ||
- get_user(length, arg+1) ||
- get_user(flags, arg+2)) {
- err = -EFAULT;
- goto out;
- }
-
- ide_floppy_get_sfrp_bit(drive, pc);
- ide_floppy_create_format_unit_cmd(pc, buf, blocks, length, flags);
-
- if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer))
- err = -EIO;
-
-out:
- if (err)
- drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
- return err;
-}
-
-/*
- * Get ATAPI_FORMAT_UNIT progress indication.
- *
- * Userland gives a pointer to an int. The int is set to a progress
- * indicator 0-65536, with 65536=100%.
- *
- * If the drive does not support format progress indication, we just check
- * the dsc bit, and return either 0 or 65536.
- */
-
-static int ide_floppy_get_format_progress(ide_drive_t *drive,
- struct ide_atapi_pc *pc,
- int __user *arg)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- u8 sense_buf[18];
- int progress_indication = 0x10000;
-
- if (drive->atapi_flags & IDE_AFLAG_SRFP) {
- ide_create_request_sense_cmd(drive, pc);
- if (ide_queue_pc_tail(drive, floppy->disk, pc, sense_buf,
- pc->req_xfer))
- return -EIO;
-
- if (floppy->sense_key == 2 &&
- floppy->asc == 4 &&
- floppy->ascq == 4)
- progress_indication = floppy->progress_indication;
-
- /* Else assume format_unit has finished, and we're at 0x10000 */
- } else {
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
- u8 stat;
-
- local_irq_save(flags);
- stat = hwif->tp_ops->read_status(hwif);
- local_irq_restore(flags);
-
- progress_indication = ((stat & ATA_DSC) == 0) ? 0 : 0x10000;
- }
-
- if (put_user(progress_indication, arg))
- return -EFAULT;
-
- return 0;
-}
-
-static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned long arg, unsigned int cmd)
-{
- struct ide_disk_obj *floppy = drive->driver_data;
- struct gendisk *disk = floppy->disk;
- int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
-
- if (floppy->openers > 1)
- return -EBUSY;
-
- ide_set_media_lock(drive, disk, prevent);
-
- if (cmd == CDROMEJECT)
- ide_do_start_stop(drive, disk, 2);
-
- return 0;
-}
-
-static int ide_floppy_format_ioctl(ide_drive_t *drive, struct ide_atapi_pc *pc,
- fmode_t mode, unsigned int cmd,
- void __user *argp)
-{
- switch (cmd) {
- case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
- return 0;
- case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return ide_floppy_get_format_capacities(drive, pc, argp);
- case IDEFLOPPY_IOCTL_FORMAT_START:
- if (!(mode & FMODE_WRITE))
- return -EPERM;
- return ide_floppy_format_unit(drive, pc, (int __user *)argp);
- case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
- return ide_floppy_get_format_progress(drive, pc, argp);
- default:
- return -ENOTTY;
- }
-}
-
-int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
- fmode_t mode, unsigned int cmd, unsigned long arg)
-{
- struct ide_atapi_pc pc;
- void __user *argp = (void __user *)arg;
- int err;
-
- mutex_lock(&ide_floppy_ioctl_mutex);
- if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) {
- err = ide_floppy_lockdoor(drive, &pc, arg, cmd);
- goto out;
- }
-
- err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
- if (err != -ENOTTY)
- goto out;
-
- /*
- * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
- * and CDROM_SEND_PACKET (legacy) ioctls
- */
- if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
- err = scsi_cmd_blk_ioctl(bdev, mode, cmd, argp);
-
- if (err == -ENOTTY)
- err = generic_ide_ioctl(drive, bdev, cmd, arg);
-
-out:
- mutex_unlock(&ide_floppy_ioctl_mutex);
- return err;
-}
-
-#ifdef CONFIG_COMPAT
-int ide_floppy_compat_ioctl(ide_drive_t *drive, struct block_device *bdev,
- fmode_t mode, unsigned int cmd, unsigned long arg)
-{
- struct ide_atapi_pc pc;
- void __user *argp = compat_ptr(arg);
- int err;
-
- mutex_lock(&ide_floppy_ioctl_mutex);
- if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR) {
- err = ide_floppy_lockdoor(drive, &pc, arg, cmd);
- goto out;
- }
-
- err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
- if (err != -ENOTTY)
- goto out;
-
- /*
- * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
- * and CDROM_SEND_PACKET (legacy) ioctls
- */
- if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
- err = scsi_cmd_blk_ioctl(bdev, mode, cmd, argp);
-
- if (err == -ENOTTY)
- err = generic_ide_ioctl(drive, bdev, cmd, arg);
-
-out:
- mutex_unlock(&ide_floppy_ioctl_mutex);
- return err;
-}
-#endif
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
deleted file mode 100644
index 7f697ddb5fe5..000000000000
--- a/drivers/ide/ide-floppy_proc.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ide.h>
-#include <linux/seq_file.h>
-
-#include "ide-floppy.h"
-
-static int idefloppy_capacity_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t*drive = (ide_drive_t *)m->private;
-
- seq_printf(m, "%llu\n", (long long)ide_gd_capacity(drive));
- return 0;
-}
-
-ide_proc_entry_t ide_floppy_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, idefloppy_capacity_proc_show },
- { "geometry", S_IFREG|S_IRUGO, ide_geometry_proc_show },
- {}
-};
-
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-ide_devset_rw_field(ticks, pc_delay);
-
-const struct ide_proc_devset ide_floppy_settings[] = {
- IDE_PROC_DEVSET(bios_cyl, 0, 1023),
- IDE_PROC_DEVSET(bios_head, 0, 255),
- IDE_PROC_DEVSET(bios_sect, 0, 63),
- IDE_PROC_DEVSET(ticks, 0, 255),
- { NULL },
-};
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
deleted file mode 100644
index e2b6c82586ce..000000000000
--- a/drivers/ide/ide-gd.c
+++ /dev/null
@@ -1,432 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/mutex.h>
-#include <linux/ide.h>
-#include <linux/hdreg.h>
-#include <linux/dmi.h>
-#include <linux/slab.h>
-
-#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
-#define IDE_DISK_MINORS (1 << PARTN_BITS)
-#else
-#define IDE_DISK_MINORS 0
-#endif
-
-#include "ide-disk.h"
-#include "ide-floppy.h"
-
-#define IDE_GD_VERSION "1.18"
-
-/* module parameters */
-static DEFINE_MUTEX(ide_gd_mutex);
-static unsigned long debug_mask;
-module_param(debug_mask, ulong, 0644);
-
-static DEFINE_MUTEX(ide_disk_ref_mutex);
-
-static void ide_disk_release(struct device *);
-
-static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
-{
- struct ide_disk_obj *idkp = NULL;
-
- mutex_lock(&ide_disk_ref_mutex);
- idkp = ide_drv_g(disk, ide_disk_obj);
- if (idkp) {
- if (ide_device_get(idkp->drive))
- idkp = NULL;
- else
- get_device(&idkp->dev);
- }
- mutex_unlock(&ide_disk_ref_mutex);
- return idkp;
-}
-
-static void ide_disk_put(struct ide_disk_obj *idkp)
-{
- ide_drive_t *drive = idkp->drive;
-
- mutex_lock(&ide_disk_ref_mutex);
- put_device(&idkp->dev);
- ide_device_put(drive);
- mutex_unlock(&ide_disk_ref_mutex);
-}
-
-sector_t ide_gd_capacity(ide_drive_t *drive)
-{
- return drive->capacity64;
-}
-
-static int ide_gd_probe(ide_drive_t *);
-
-static void ide_gd_remove(ide_drive_t *drive)
-{
- struct ide_disk_obj *idkp = drive->driver_data;
- struct gendisk *g = idkp->disk;
-
- ide_proc_unregister_driver(drive, idkp->driver);
- device_del(&idkp->dev);
- del_gendisk(g);
- drive->disk_ops->flush(drive);
-
- mutex_lock(&ide_disk_ref_mutex);
- put_device(&idkp->dev);
- mutex_unlock(&ide_disk_ref_mutex);
-}
-
-static void ide_disk_release(struct device *dev)
-{
- struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj);
- ide_drive_t *drive = idkp->drive;
- struct gendisk *g = idkp->disk;
-
- drive->disk_ops = NULL;
- drive->driver_data = NULL;
- g->private_data = NULL;
- put_disk(g);
- kfree(idkp);
-}
-
-/*
- * On HPA drives the capacity needs to be
- * reinitialized on resume otherwise the disk
- * can not be used and a hard reset is required
- */
-static void ide_gd_resume(ide_drive_t *drive)
-{
- if (ata_id_hpa_enabled(drive->id))
- (void)drive->disk_ops->get_capacity(drive);
-}
-
-static const struct dmi_system_id ide_coldreboot_table[] = {
- {
- /* Acer TravelMate 66x cuts power during reboot */
- .ident = "Acer TravelMate 660",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
- },
- },
-
- { } /* terminate list */
-};
-
-static void ide_gd_shutdown(ide_drive_t *drive)
-{
-#ifdef CONFIG_ALPHA
- /* On Alpha, halt(8) doesn't actually turn the machine off,
- it puts you into the sort of firmware monitor. Typically,
- it's used to boot another kernel image, so it's not much
- different from reboot(8). Therefore, we don't need to
- spin down the disk in this case, especially since Alpha
- firmware doesn't handle disks in standby mode properly.
- On the other hand, it's reasonably safe to turn the power
- off when the shutdown process reaches the firmware prompt,
- as the firmware initialization takes rather long time -
- at least 10 seconds, which should be sufficient for
- the disk to expire its write cache. */
- if (system_state != SYSTEM_POWER_OFF) {
-#else
- if (system_state == SYSTEM_RESTART &&
- !dmi_check_system(ide_coldreboot_table)) {
-#endif
- drive->disk_ops->flush(drive);
- return;
- }
-
- printk(KERN_INFO "Shutdown: %s\n", drive->name);
-
- drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
-}
-
-#ifdef CONFIG_IDE_PROC_FS
-static ide_proc_entry_t *ide_disk_proc_entries(ide_drive_t *drive)
-{
- return (drive->media == ide_disk) ? ide_disk_proc : ide_floppy_proc;
-}
-
-static const struct ide_proc_devset *ide_disk_proc_devsets(ide_drive_t *drive)
-{
- return (drive->media == ide_disk) ? ide_disk_settings
- : ide_floppy_settings;
-}
-#endif
-
-static ide_startstop_t ide_gd_do_request(ide_drive_t *drive,
- struct request *rq, sector_t sector)
-{
- return drive->disk_ops->do_request(drive, rq, sector);
-}
-
-static struct ide_driver ide_gd_driver = {
- .gen_driver = {
- .owner = THIS_MODULE,
- .name = "ide-gd",
- .bus = &ide_bus_type,
- },
- .probe = ide_gd_probe,
- .remove = ide_gd_remove,
- .resume = ide_gd_resume,
- .shutdown = ide_gd_shutdown,
- .version = IDE_GD_VERSION,
- .do_request = ide_gd_do_request,
-#ifdef CONFIG_IDE_PROC_FS
- .proc_entries = ide_disk_proc_entries,
- .proc_devsets = ide_disk_proc_devsets,
-#endif
-};
-
-static int ide_gd_open(struct block_device *bdev, fmode_t mode)
-{
- struct gendisk *disk = bdev->bd_disk;
- struct ide_disk_obj *idkp;
- ide_drive_t *drive;
- int ret = 0;
-
- idkp = ide_disk_get(disk);
- if (idkp == NULL)
- return -ENXIO;
-
- drive = idkp->drive;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- idkp->openers++;
-
- if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
- drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
- /* Just in case */
-
- ret = drive->disk_ops->init_media(drive, disk);
-
- /*
- * Allow O_NDELAY to open a drive without a disk, or with an
- * unreadable disk, so that we can get the format capacity
- * of the drive or begin the format - Sam
- */
- if (ret && (mode & FMODE_NDELAY) == 0) {
- ret = -EIO;
- goto out_put_idkp;
- }
-
- if ((drive->dev_flags & IDE_DFLAG_WP) && (mode & FMODE_WRITE)) {
- ret = -EROFS;
- goto out_put_idkp;
- }
-
- /*
- * Ignore the return code from door_lock,
- * since the open() has already succeeded,
- * and the door_lock is irrelevant at this point.
- */
- drive->disk_ops->set_doorlock(drive, disk, 1);
- if (__invalidate_device(bdev, true))
- pr_warn("VFS: busy inodes on changed media %s\n",
- bdev->bd_disk->disk_name);
- drive->disk_ops->get_capacity(drive);
- set_capacity(disk, ide_gd_capacity(drive));
- set_bit(GD_NEED_PART_SCAN, &disk->state);
- } else if (drive->dev_flags & IDE_DFLAG_FORMAT_IN_PROGRESS) {
- ret = -EBUSY;
- goto out_put_idkp;
- }
- return 0;
-
-out_put_idkp:
- idkp->openers--;
- ide_disk_put(idkp);
- return ret;
-}
-
-static int ide_gd_unlocked_open(struct block_device *bdev, fmode_t mode)
-{
- int ret;
-
- mutex_lock(&ide_gd_mutex);
- ret = ide_gd_open(bdev, mode);
- mutex_unlock(&ide_gd_mutex);
-
- return ret;
-}
-
-
-static void ide_gd_release(struct gendisk *disk, fmode_t mode)
-{
- struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
- ide_drive_t *drive = idkp->drive;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- mutex_lock(&ide_gd_mutex);
- if (idkp->openers == 1)
- drive->disk_ops->flush(drive);
-
- if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
- drive->disk_ops->set_doorlock(drive, disk, 0);
- drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
- }
-
- idkp->openers--;
-
- ide_disk_put(idkp);
- mutex_unlock(&ide_gd_mutex);
-}
-
-static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
- ide_drive_t *drive = idkp->drive;
-
- geo->heads = drive->bios_head;
- geo->sectors = drive->bios_sect;
- geo->cylinders = (u16)drive->bios_cyl; /* truncate */
- return 0;
-}
-
-static void ide_gd_unlock_native_capacity(struct gendisk *disk)
-{
- struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
- ide_drive_t *drive = idkp->drive;
- const struct ide_disk_ops *disk_ops = drive->disk_ops;
-
- if (disk_ops->unlock_native_capacity)
- disk_ops->unlock_native_capacity(drive);
-}
-
-static int ide_gd_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
- ide_drive_t *drive = idkp->drive;
-
- return drive->disk_ops->ioctl(drive, bdev, mode, cmd, arg);
-}
-
-#ifdef CONFIG_COMPAT
-static int ide_gd_compat_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
- ide_drive_t *drive = idkp->drive;
-
- if (!drive->disk_ops->compat_ioctl)
- return -ENOIOCTLCMD;
-
- return drive->disk_ops->compat_ioctl(drive, bdev, mode, cmd, arg);
-}
-#endif
-
-static const struct block_device_operations ide_gd_ops = {
- .owner = THIS_MODULE,
- .open = ide_gd_unlocked_open,
- .release = ide_gd_release,
- .ioctl = ide_gd_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = ide_gd_compat_ioctl,
-#endif
- .getgeo = ide_gd_getgeo,
- .unlock_native_capacity = ide_gd_unlock_native_capacity,
-};
-
-static int ide_gd_probe(ide_drive_t *drive)
-{
- const struct ide_disk_ops *disk_ops = NULL;
- struct ide_disk_obj *idkp;
- struct gendisk *g;
-
- /* strstr("foo", "") is non-NULL */
- if (!strstr("ide-gd", drive->driver_req))
- goto failed;
-
-#ifdef CONFIG_IDE_GD_ATA
- if (drive->media == ide_disk)
- disk_ops = &ide_ata_disk_ops;
-#endif
-#ifdef CONFIG_IDE_GD_ATAPI
- if (drive->media == ide_floppy)
- disk_ops = &ide_atapi_disk_ops;
-#endif
- if (disk_ops == NULL)
- goto failed;
-
- if (disk_ops->check(drive, DRV_NAME) == 0) {
- printk(KERN_ERR PFX "%s: not supported by this driver\n",
- drive->name);
- goto failed;
- }
-
- idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
- if (!idkp) {
- printk(KERN_ERR PFX "%s: can't allocate a disk structure\n",
- drive->name);
- goto failed;
- }
-
- g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif));
- if (!g)
- goto out_free_idkp;
-
- ide_init_disk(g, drive);
-
- idkp->dev.parent = &drive->gendev;
- idkp->dev.release = ide_disk_release;
- dev_set_name(&idkp->dev, "%s", dev_name(&drive->gendev));
-
- if (device_register(&idkp->dev))
- goto out_free_disk;
-
- idkp->drive = drive;
- idkp->driver = &ide_gd_driver;
- idkp->disk = g;
-
- g->private_data = &idkp->driver;
-
- drive->driver_data = idkp;
- drive->debug_mask = debug_mask;
- drive->disk_ops = disk_ops;
-
- disk_ops->setup(drive);
-
- set_capacity(g, ide_gd_capacity(drive));
-
- g->minors = IDE_DISK_MINORS;
- g->flags |= GENHD_FL_EXT_DEVT;
- if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
- g->flags = GENHD_FL_REMOVABLE;
- g->fops = &ide_gd_ops;
- g->events = DISK_EVENT_MEDIA_CHANGE;
- device_add_disk(&drive->gendev, g, NULL);
- return 0;
-
-out_free_disk:
- put_disk(g);
-out_free_idkp:
- kfree(idkp);
-failed:
- return -ENODEV;
-}
-
-static int __init ide_gd_init(void)
-{
- printk(KERN_INFO DRV_NAME " driver " IDE_GD_VERSION "\n");
- return driver_register(&ide_gd_driver.gen_driver);
-}
-
-static void __exit ide_gd_exit(void)
-{
- driver_unregister(&ide_gd_driver.gen_driver);
-}
-
-MODULE_ALIAS("ide:*m-disk*");
-MODULE_ALIAS("ide-disk");
-MODULE_ALIAS("ide:*m-floppy*");
-MODULE_ALIAS("ide-floppy");
-module_init(ide_gd_init);
-module_exit(ide_gd_exit);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("generic ATA/ATAPI disk driver");
diff --git a/drivers/ide/ide-gd.h b/drivers/ide/ide-gd.h
deleted file mode 100644
index af3fe1880e9e..000000000000
--- a/drivers/ide/ide-gd.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __IDE_GD_H
-#define __IDE_GD_H
-
-#define DRV_NAME "ide-gd"
-#define PFX DRV_NAME ": "
-
-/* define to see debug info */
-#define IDE_GD_DEBUG_LOG 0
-
-#if IDE_GD_DEBUG_LOG
-#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
-#else
-#define ide_debug_log(lvl, fmt, args...) do {} while (0)
-#endif
-
-struct ide_disk_obj {
- ide_drive_t *drive;
- struct ide_driver *driver;
- struct gendisk *disk;
- struct device dev;
- unsigned int openers; /* protected by BKL for now */
-
- /* used for blk_{fs,pc}_request() requests */
- struct ide_atapi_pc queued_pc;
-
- /* Last error information */
- u8 sense_key, asc, ascq;
-
- int progress_indication;
-
- /* Device information */
- /* Current format */
- int blocks, block_size, bs_factor;
- /* Last format capacity descriptor */
- u8 cap_desc[8];
- /* Copy of the flexible disk page */
- u8 flexible_disk_page[32];
-};
-
-sector_t ide_gd_capacity(ide_drive_t *);
-
-#endif /* __IDE_GD_H */
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
deleted file mode 100644
index 80c0d69b83ac..000000000000
--- a/drivers/ide/ide-generic.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * generic/default IDE host driver
- *
- * Copyright (C) 2004, 2008-2009 Bartlomiej Zolnierkiewicz
- * This code was split off from ide.c. See it for original copyrights.
- *
- * May be copied or modified under the terms of the GNU General Public License.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-#include <linux/pci_ids.h>
-
-/* FIXME: convert arm to use ide_platform host driver */
-#ifdef CONFIG_ARM
-#include <asm/irq.h>
-#endif
-
-#define DRV_NAME "ide_generic"
-
-static int probe_mask;
-module_param(probe_mask, int, 0);
-MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
-
-static const struct ide_port_info ide_generic_port_info = {
- .host_flags = IDE_HFLAG_NO_DMA,
- .chipset = ide_generic,
-};
-
-#ifdef CONFIG_ARM
-static const u16 legacy_bases[] = { 0x1f0 };
-static const int legacy_irqs[] = { IRQ_HARDDISK };
-#elif defined(CONFIG_ALPHA)
-static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 };
-static const int legacy_irqs[] = { 14, 15, 11, 10 };
-#else
-static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
-static const int legacy_irqs[] = { 14, 15, 11, 10, 8, 12 };
-#endif
-
-static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)
-{
-#ifdef CONFIG_PCI
- struct pci_dev *p = NULL;
- u16 val;
-
- for_each_pci_dev(p) {
- if (pci_resource_start(p, 0) == 0x1f0)
- *primary = 1;
- if (pci_resource_start(p, 2) == 0x170)
- *secondary = 1;
-
- /* Cyrix CS55{1,2}0 pre SFF MWDMA ATA on the bridge */
- if (p->vendor == PCI_VENDOR_ID_CYRIX &&
- (p->device == PCI_DEVICE_ID_CYRIX_5510 ||
- p->device == PCI_DEVICE_ID_CYRIX_5520))
- *primary = *secondary = 1;
-
- /* Intel MPIIX - PIO ATA on non PCI side of bridge */
- if (p->vendor == PCI_VENDOR_ID_INTEL &&
- p->device == PCI_DEVICE_ID_INTEL_82371MX) {
- pci_read_config_word(p, 0x6C, &val);
- if (val & 0x8000) {
- /* ATA port enabled */
- if (val & 0x4000)
- *secondary = 1;
- else
- *primary = 1;
- }
- }
- }
-#endif
-}
-
-static int __init ide_generic_init(void)
-{
- struct ide_hw hw, *hws[] = { &hw };
- unsigned long io_addr;
- int i, rc = 0, primary = 0, secondary = 0;
-
- ide_generic_check_pci_legacy_iobases(&primary, &secondary);
-
- if (!probe_mask) {
- printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" "
- "module parameter for probing all legacy ISA IDE ports\n");
-
- if (primary == 0)
- probe_mask |= 0x1;
-
- if (secondary == 0)
- probe_mask |= 0x2;
- } else
- printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports "
- "upon user request\n");
-
- for (i = 0; i < ARRAY_SIZE(legacy_bases); i++) {
- io_addr = legacy_bases[i];
-
- if ((probe_mask & (1 << i)) && io_addr) {
- if (!request_region(io_addr, 8, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
- "not free.\n",
- DRV_NAME, io_addr, io_addr + 7);
- rc = -EBUSY;
- continue;
- }
-
- if (!request_region(io_addr + 0x206, 1, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX "
- "not free.\n",
- DRV_NAME, io_addr + 0x206);
- release_region(io_addr, 8);
- rc = -EBUSY;
- continue;
- }
-
- memset(&hw, 0, sizeof(hw));
- ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
-#ifdef CONFIG_IA64
- hw.irq = isa_irq_to_vector(legacy_irqs[i]);
-#else
- hw.irq = legacy_irqs[i];
-#endif
- rc = ide_host_add(&ide_generic_port_info, hws, 1, NULL);
- if (rc) {
- release_region(io_addr + 0x206, 1);
- release_region(io_addr, 8);
- }
- }
- }
-
- return rc;
-}
-
-module_init(ide_generic_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c
deleted file mode 100644
index 94bdcf1ea186..000000000000
--- a/drivers/ide/ide-io-std.c
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ide.h>
-
-#if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \
- defined(CONFIG_PARISC) || defined(CONFIG_PPC) || defined(CONFIG_SPARC)
-#include <asm/ide.h>
-#else
-#include <asm-generic/ide_iops.h>
-#endif
-
-/*
- * Conventional PIO operations for ATA devices
- */
-
-static u8 ide_inb(unsigned long port)
-{
- return (u8) inb(port);
-}
-
-static void ide_outb(u8 val, unsigned long port)
-{
- outb(val, port);
-}
-
-/*
- * MMIO operations, typically used for SATA controllers
- */
-
-static u8 ide_mm_inb(unsigned long port)
-{
- return (u8) readb((void __iomem *) port);
-}
-
-static void ide_mm_outb(u8 value, unsigned long port)
-{
- writeb(value, (void __iomem *) port);
-}
-
-void ide_exec_command(ide_hwif_t *hwif, u8 cmd)
-{
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
- else
- outb(cmd, hwif->io_ports.command_addr);
-}
-EXPORT_SYMBOL_GPL(ide_exec_command);
-
-u8 ide_read_status(ide_hwif_t *hwif)
-{
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- return readb((void __iomem *)hwif->io_ports.status_addr);
- else
- return inb(hwif->io_ports.status_addr);
-}
-EXPORT_SYMBOL_GPL(ide_read_status);
-
-u8 ide_read_altstatus(ide_hwif_t *hwif)
-{
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- return readb((void __iomem *)hwif->io_ports.ctl_addr);
- else
- return inb(hwif->io_ports.ctl_addr);
-}
-EXPORT_SYMBOL_GPL(ide_read_altstatus);
-
-void ide_write_devctl(ide_hwif_t *hwif, u8 ctl)
-{
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
- else
- outb(ctl, hwif->io_ports.ctl_addr);
-}
-EXPORT_SYMBOL_GPL(ide_write_devctl);
-
-void ide_dev_select(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 select = drive->select | ATA_DEVICE_OBS;
-
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writeb(select, (void __iomem *)hwif->io_ports.device_addr);
- else
- outb(select, hwif->io_ports.device_addr);
-}
-EXPORT_SYMBOL_GPL(ide_dev_select);
-
-void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- void (*tf_outb)(u8 addr, unsigned long port);
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-
- if (mmio)
- tf_outb = ide_mm_outb;
- else
- tf_outb = ide_outb;
-
- if (valid & IDE_VALID_FEATURE)
- tf_outb(tf->feature, io_ports->feature_addr);
- if (valid & IDE_VALID_NSECT)
- tf_outb(tf->nsect, io_ports->nsect_addr);
- if (valid & IDE_VALID_LBAL)
- tf_outb(tf->lbal, io_ports->lbal_addr);
- if (valid & IDE_VALID_LBAM)
- tf_outb(tf->lbam, io_ports->lbam_addr);
- if (valid & IDE_VALID_LBAH)
- tf_outb(tf->lbah, io_ports->lbah_addr);
- if (valid & IDE_VALID_DEVICE)
- tf_outb(tf->device, io_ports->device_addr);
-}
-EXPORT_SYMBOL_GPL(ide_tf_load);
-
-void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 (*tf_inb)(unsigned long port);
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-
- if (mmio)
- tf_inb = ide_mm_inb;
- else
- tf_inb = ide_inb;
-
- if (valid & IDE_VALID_ERROR)
- tf->error = tf_inb(io_ports->feature_addr);
- if (valid & IDE_VALID_NSECT)
- tf->nsect = tf_inb(io_ports->nsect_addr);
- if (valid & IDE_VALID_LBAL)
- tf->lbal = tf_inb(io_ports->lbal_addr);
- if (valid & IDE_VALID_LBAM)
- tf->lbam = tf_inb(io_ports->lbam_addr);
- if (valid & IDE_VALID_LBAH)
- tf->lbah = tf_inb(io_ports->lbah_addr);
- if (valid & IDE_VALID_DEVICE)
- tf->device = tf_inb(io_ports->device_addr);
-}
-EXPORT_SYMBOL_GPL(ide_tf_read);
-
-/*
- * Some localbus EIDE interfaces require a special access sequence
- * when using 32-bit I/O instructions to transfer data. We call this
- * the "vlb_sync" sequence, which consists of three successive reads
- * of the sector count register location, with interrupts disabled
- * to ensure that the reads all happen together.
- */
-static void ata_vlb_sync(unsigned long port)
-{
- (void)inb(port);
- (void)inb(port);
- (void)inb(port);
-}
-
-/*
- * This is used for most PIO data transfers *from* the IDE interface
- *
- * These routines will round up any request for an odd number of bytes,
- * so if an odd len is specified, be sure that there's at least one
- * extra byte allocated for the buffer.
- */
-void ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf,
- unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- unsigned long data_addr = io_ports->data_addr;
- unsigned int words = (len + 1) >> 1;
- u8 io_32bit = drive->io_32bit;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-
- if (io_32bit) {
- unsigned long flags;
-
- if ((io_32bit & 2) && !mmio) {
- local_irq_save(flags);
- ata_vlb_sync(io_ports->nsect_addr);
- }
-
- words >>= 1;
- if (mmio)
- __ide_mm_insl((void __iomem *)data_addr, buf, words);
- else
- insl(data_addr, buf, words);
-
- if ((io_32bit & 2) && !mmio)
- local_irq_restore(flags);
-
- if (((len + 1) & 3) < 2)
- return;
-
- buf += len & ~3;
- words = 1;
- }
-
- if (mmio)
- __ide_mm_insw((void __iomem *)data_addr, buf, words);
- else
- insw(data_addr, buf, words);
-}
-EXPORT_SYMBOL_GPL(ide_input_data);
-
-/*
- * This is used for most PIO data transfers *to* the IDE interface
- */
-void ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf,
- unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- unsigned long data_addr = io_ports->data_addr;
- unsigned int words = (len + 1) >> 1;
- u8 io_32bit = drive->io_32bit;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-
- if (io_32bit) {
- unsigned long flags;
-
- if ((io_32bit & 2) && !mmio) {
- local_irq_save(flags);
- ata_vlb_sync(io_ports->nsect_addr);
- }
-
- words >>= 1;
- if (mmio)
- __ide_mm_outsl((void __iomem *)data_addr, buf, words);
- else
- outsl(data_addr, buf, words);
-
- if ((io_32bit & 2) && !mmio)
- local_irq_restore(flags);
-
- if (((len + 1) & 3) < 2)
- return;
-
- buf += len & ~3;
- words = 1;
- }
-
- if (mmio)
- __ide_mm_outsw((void __iomem *)data_addr, buf, words);
- else
- outsw(data_addr, buf, words);
-}
-EXPORT_SYMBOL_GPL(ide_output_data);
-
-const struct ide_tp_ops default_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
deleted file mode 100644
index 4867b67b60d6..000000000000
--- a/drivers/ide/ide-io.c
+++ /dev/null
@@ -1,904 +0,0 @@
-/*
- * IDE I/O functions
- *
- * Basic PIO and command management functionality.
- *
- * This code was split off from ide.c. See ide.c for history and original
- * copyrights.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * For the avoidance of doubt the "preferred form" of this code is one which
- * is in an open non patent encumbered format. Where cryptographic key signing
- * forms part of the process of creating an executable the information
- * including keys needed to generate an equivalently functional executable
- * are deemed to be part of the source code.
- */
-
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/blkpg.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/completion.h>
-#include <linux/reboot.h>
-#include <linux/cdrom.h>
-#include <linux/seq_file.h>
-#include <linux/device.h>
-#include <linux/kmod.h>
-#include <linux/scatterlist.h>
-#include <linux/bitops.h>
-
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-
-int ide_end_rq(ide_drive_t *drive, struct request *rq, blk_status_t error,
- unsigned int nr_bytes)
-{
- /*
- * decide whether to reenable DMA -- 3 is a random magic for now,
- * if we DMA timeout more than 3 times, just stay in PIO
- */
- if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
- drive->retry_pio <= 3) {
- drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
- ide_dma_on(drive);
- }
-
- if (!blk_update_request(rq, error, nr_bytes)) {
- if (rq == drive->sense_rq) {
- drive->sense_rq = NULL;
- drive->sense_rq_active = false;
- }
-
- __blk_mq_end_request(rq, error);
- return 0;
- }
-
- return 1;
-}
-EXPORT_SYMBOL_GPL(ide_end_rq);
-
-void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
-{
- const struct ide_tp_ops *tp_ops = drive->hwif->tp_ops;
- struct ide_taskfile *tf = &cmd->tf;
- struct request *rq = cmd->rq;
- u8 tf_cmd = tf->command;
-
- tf->error = err;
- tf->status = stat;
-
- if (cmd->ftf_flags & IDE_FTFLAG_IN_DATA) {
- u8 data[2];
-
- tp_ops->input_data(drive, cmd, data, 2);
-
- cmd->tf.data = data[0];
- cmd->hob.data = data[1];
- }
-
- ide_tf_readback(drive, cmd);
-
- if ((cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) &&
- tf_cmd == ATA_CMD_IDLEIMMEDIATE) {
- if (tf->lbal != 0xc4) {
- printk(KERN_ERR "%s: head unload failed!\n",
- drive->name);
- ide_tf_dump(drive->name, cmd);
- } else
- drive->dev_flags |= IDE_DFLAG_PARKED;
- }
-
- if (rq && ata_taskfile_request(rq)) {
- struct ide_cmd *orig_cmd = ide_req(rq)->special;
-
- if (cmd->tf_flags & IDE_TFLAG_DYN)
- kfree(orig_cmd);
- else if (cmd != orig_cmd)
- memcpy(orig_cmd, cmd, sizeof(*cmd));
- }
-}
-
-int ide_complete_rq(ide_drive_t *drive, blk_status_t error, unsigned int nr_bytes)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->rq;
- int rc;
-
- /*
- * if failfast is set on a request, override number of sectors
- * and complete the whole request right now
- */
- if (blk_noretry_request(rq) && error)
- nr_bytes = blk_rq_sectors(rq) << 9;
-
- rc = ide_end_rq(drive, rq, error, nr_bytes);
- if (rc == 0)
- hwif->rq = NULL;
-
- return rc;
-}
-EXPORT_SYMBOL(ide_complete_rq);
-
-void ide_kill_rq(ide_drive_t *drive, struct request *rq)
-{
- u8 drv_req = ata_misc_request(rq) && rq->rq_disk;
- u8 media = drive->media;
-
- drive->failed_pc = NULL;
-
- if ((media == ide_floppy || media == ide_tape) && drv_req) {
- scsi_req(rq)->result = 0;
- } else {
- if (media == ide_tape)
- scsi_req(rq)->result = IDE_DRV_ERROR_GENERAL;
- else if (blk_rq_is_passthrough(rq) && scsi_req(rq)->result == 0)
- scsi_req(rq)->result = -EIO;
- }
-
- ide_complete_rq(drive, BLK_STS_IOERR, blk_rq_bytes(rq));
-}
-
-static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
-{
- tf->nsect = drive->sect;
- tf->lbal = drive->sect;
- tf->lbam = drive->cyl;
- tf->lbah = drive->cyl >> 8;
- tf->device = (drive->head - 1) | drive->select;
- tf->command = ATA_CMD_INIT_DEV_PARAMS;
-}
-
-static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
-{
- tf->nsect = drive->sect;
- tf->command = ATA_CMD_RESTORE;
-}
-
-static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
-{
- tf->nsect = drive->mult_req;
- tf->command = ATA_CMD_SET_MULTI;
-}
-
-/**
- * do_special - issue some special commands
- * @drive: drive the command is for
- *
- * do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
- * ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
- */
-
-static ide_startstop_t do_special(ide_drive_t *drive)
-{
- struct ide_cmd cmd;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "%s: %s: 0x%02x\n", drive->name, __func__,
- drive->special_flags);
-#endif
- if (drive->media != ide_disk) {
- drive->special_flags = 0;
- drive->mult_req = 0;
- return ide_stopped;
- }
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.protocol = ATA_PROT_NODATA;
-
- if (drive->special_flags & IDE_SFLAG_SET_GEOMETRY) {
- drive->special_flags &= ~IDE_SFLAG_SET_GEOMETRY;
- ide_tf_set_specify_cmd(drive, &cmd.tf);
- } else if (drive->special_flags & IDE_SFLAG_RECALIBRATE) {
- drive->special_flags &= ~IDE_SFLAG_RECALIBRATE;
- ide_tf_set_restore_cmd(drive, &cmd.tf);
- } else if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) {
- drive->special_flags &= ~IDE_SFLAG_SET_MULTMODE;
- ide_tf_set_setmult_cmd(drive, &cmd.tf);
- } else
- BUG();
-
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- cmd.tf_flags = IDE_TFLAG_CUSTOM_HANDLER;
-
- do_rw_taskfile(drive, &cmd);
-
- return ide_started;
-}
-
-void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct scatterlist *sg = hwif->sg_table, *last_sg = NULL;
- struct request *rq = cmd->rq;
-
- cmd->sg_nents = __blk_rq_map_sg(drive->queue, rq, sg, &last_sg);
- if (blk_rq_bytes(rq) && (blk_rq_bytes(rq) & rq->q->dma_pad_mask))
- last_sg->length +=
- (rq->q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
-}
-EXPORT_SYMBOL_GPL(ide_map_sg);
-
-void ide_init_sg_cmd(struct ide_cmd *cmd, unsigned int nr_bytes)
-{
- cmd->nbytes = cmd->nleft = nr_bytes;
- cmd->cursg_ofs = 0;
- cmd->cursg = NULL;
-}
-EXPORT_SYMBOL_GPL(ide_init_sg_cmd);
-
-/**
- * execute_drive_command - issue special drive command
- * @drive: the drive to issue the command on
- * @rq: the request structure holding the command
- *
- * execute_drive_cmd() issues a special drive command, usually
- * initiated by ioctl() from the external hdparm program. The
- * command can be a drive command, drive task or taskfile
- * operation. Weirdly you can call it with NULL to wait for
- * all commands to finish. Don't do this as that is due to change
- */
-
-static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
- struct request *rq)
-{
- struct ide_cmd *cmd = ide_req(rq)->special;
-
- if (cmd) {
- if (cmd->protocol == ATA_PROT_PIO) {
- ide_init_sg_cmd(cmd, blk_rq_sectors(rq) << 9);
- ide_map_sg(drive, cmd);
- }
-
- return do_rw_taskfile(drive, cmd);
- }
-
- /*
- * NULL is actually a valid way of waiting for
- * all current requests to be flushed from the queue.
- */
-#ifdef DEBUG
- printk("%s: DRIVE_CMD (null)\n", drive->name);
-#endif
- scsi_req(rq)->result = 0;
- ide_complete_rq(drive, BLK_STS_OK, blk_rq_bytes(rq));
-
- return ide_stopped;
-}
-
-static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
-{
- u8 cmd = scsi_req(rq)->cmd[0];
-
- switch (cmd) {
- case REQ_PARK_HEADS:
- case REQ_UNPARK_HEADS:
- return ide_do_park_unpark(drive, rq);
- case REQ_DEVSET_EXEC:
- return ide_do_devset(drive, rq);
- case REQ_DRIVE_RESET:
- return ide_do_reset(drive);
- default:
- BUG();
- }
-}
-
-/**
- * start_request - start of I/O and command issuing for IDE
- *
- * start_request() initiates handling of a new I/O request. It
- * accepts commands and I/O (read/write) requests.
- *
- * FIXME: this function needs a rename
- */
-
-static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
-{
- ide_startstop_t startstop;
-
-#ifdef DEBUG
- printk("%s: start_request: current=0x%08lx\n",
- drive->hwif->name, (unsigned long) rq);
-#endif
-
- /* bail early if we've exceeded max_failures */
- if (drive->max_failures && (drive->failures > drive->max_failures)) {
- rq->rq_flags |= RQF_FAILED;
- goto kill_rq;
- }
-
- if (drive->prep_rq && !drive->prep_rq(drive, rq))
- return ide_stopped;
-
- if (ata_pm_request(rq))
- ide_check_pm_state(drive, rq);
-
- drive->hwif->tp_ops->dev_select(drive);
- if (ide_wait_stat(&startstop, drive, drive->ready_stat,
- ATA_BUSY | ATA_DRQ, WAIT_READY)) {
- printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
- return startstop;
- }
-
- if (drive->special_flags == 0) {
- struct ide_driver *drv;
-
- /*
- * We reset the drive so we need to issue a SETFEATURES.
- * Do it _after_ do_special() restored device parameters.
- */
- if (drive->current_speed == 0xff)
- ide_config_drive_speed(drive, drive->desired_speed);
-
- if (ata_taskfile_request(rq))
- return execute_drive_cmd(drive, rq);
- else if (ata_pm_request(rq)) {
- struct ide_pm_state *pm = ide_req(rq)->special;
-#ifdef DEBUG_PM
- printk("%s: start_power_step(step: %d)\n",
- drive->name, pm->pm_step);
-#endif
- startstop = ide_start_power_step(drive, rq);
- if (startstop == ide_stopped &&
- pm->pm_step == IDE_PM_COMPLETED)
- ide_complete_pm_rq(drive, rq);
- return startstop;
- } else if (!rq->rq_disk && ata_misc_request(rq))
- /*
- * TODO: Once all ULDs have been modified to
- * check for specific op codes rather than
- * blindly accepting any special request, the
- * check for ->rq_disk above may be replaced
- * by a more suitable mechanism or even
- * dropped entirely.
- */
- return ide_special_rq(drive, rq);
-
- drv = *(struct ide_driver **)rq->rq_disk->private_data;
-
- return drv->do_request(drive, rq, blk_rq_pos(rq));
- }
- return do_special(drive);
-kill_rq:
- ide_kill_rq(drive, rq);
- return ide_stopped;
-}
-
-/**
- * ide_stall_queue - pause an IDE device
- * @drive: drive to stall
- * @timeout: time to stall for (jiffies)
- *
- * ide_stall_queue() can be used by a drive to give excess bandwidth back
- * to the port by sleeping for timeout jiffies.
- */
-
-void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
-{
- if (timeout > WAIT_WORSTCASE)
- timeout = WAIT_WORSTCASE;
- drive->sleep = timeout + jiffies;
- drive->dev_flags |= IDE_DFLAG_SLEEPING;
-}
-EXPORT_SYMBOL(ide_stall_queue);
-
-static inline int ide_lock_port(ide_hwif_t *hwif)
-{
- if (hwif->busy)
- return 1;
-
- hwif->busy = 1;
-
- return 0;
-}
-
-static inline void ide_unlock_port(ide_hwif_t *hwif)
-{
- hwif->busy = 0;
-}
-
-static inline int ide_lock_host(struct ide_host *host, ide_hwif_t *hwif)
-{
- int rc = 0;
-
- if (host->host_flags & IDE_HFLAG_SERIALIZE) {
- rc = test_and_set_bit_lock(IDE_HOST_BUSY, &host->host_busy);
- if (rc == 0) {
- if (host->get_lock)
- host->get_lock(ide_intr, hwif);
- }
- }
- return rc;
-}
-
-static inline void ide_unlock_host(struct ide_host *host)
-{
- if (host->host_flags & IDE_HFLAG_SERIALIZE) {
- if (host->release_lock)
- host->release_lock();
- clear_bit_unlock(IDE_HOST_BUSY, &host->host_busy);
- }
-}
-
-void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
-{
- struct request_queue *q = drive->queue;
-
- /* Use 3ms as that was the old plug delay */
- if (rq) {
- blk_mq_requeue_request(rq, false);
- blk_mq_delay_kick_requeue_list(q, 3);
- } else
- blk_mq_delay_run_hw_queue(q->queue_hw_ctx[0], 3);
-}
-
-blk_status_t ide_issue_rq(ide_drive_t *drive, struct request *rq,
- bool local_requeue)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_host *host = hwif->host;
- ide_startstop_t startstop;
-
- if (!blk_rq_is_passthrough(rq) && !(rq->rq_flags & RQF_DONTPREP)) {
- rq->rq_flags |= RQF_DONTPREP;
- ide_req(rq)->special = NULL;
- }
-
- /* HLD do_request() callback might sleep, make sure it's okay */
- might_sleep();
-
- if (ide_lock_host(host, hwif))
- return BLK_STS_DEV_RESOURCE;
-
- spin_lock_irq(&hwif->lock);
-
- if (!ide_lock_port(hwif)) {
- ide_hwif_t *prev_port;
-
- WARN_ON_ONCE(hwif->rq);
-repeat:
- prev_port = hwif->host->cur_port;
- if (drive->dev_flags & IDE_DFLAG_SLEEPING &&
- time_after(drive->sleep, jiffies)) {
- ide_unlock_port(hwif);
- goto plug_device;
- }
-
- if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) &&
- hwif != prev_port) {
- ide_drive_t *cur_dev =
- prev_port ? prev_port->cur_dev : NULL;
-
- /*
- * set nIEN for previous port, drives in the
- * quirk list may not like intr setups/cleanups
- */
- if (cur_dev &&
- (cur_dev->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
- prev_port->tp_ops->write_devctl(prev_port,
- ATA_NIEN |
- ATA_DEVCTL_OBS);
-
- hwif->host->cur_port = hwif;
- }
- hwif->cur_dev = drive;
- drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
-
- /*
- * Sanity: don't accept a request that isn't a PM request
- * if we are currently power managed. This is very important as
- * blk_stop_queue() doesn't prevent the blk_fetch_request()
- * above to return us whatever is in the queue. Since we call
- * ide_do_request() ourselves, we end up taking requests while
- * the queue is blocked...
- */
- if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
- ata_pm_request(rq) == 0 &&
- (rq->rq_flags & RQF_PM) == 0) {
- /* there should be no pending command at this point */
- ide_unlock_port(hwif);
- goto plug_device;
- }
-
- scsi_req(rq)->resid_len = blk_rq_bytes(rq);
- hwif->rq = rq;
-
- spin_unlock_irq(&hwif->lock);
- startstop = start_request(drive, rq);
- spin_lock_irq(&hwif->lock);
-
- if (startstop == ide_stopped) {
- rq = hwif->rq;
- hwif->rq = NULL;
- if (rq)
- goto repeat;
- ide_unlock_port(hwif);
- goto out;
- }
- } else {
-plug_device:
- if (local_requeue)
- list_add(&rq->queuelist, &drive->rq_list);
- spin_unlock_irq(&hwif->lock);
- ide_unlock_host(host);
- if (!local_requeue)
- ide_requeue_and_plug(drive, rq);
- return BLK_STS_OK;
- }
-
-out:
- spin_unlock_irq(&hwif->lock);
- if (rq == NULL)
- ide_unlock_host(host);
- return BLK_STS_OK;
-}
-
-/*
- * Issue a new request to a device.
- */
-blk_status_t ide_queue_rq(struct blk_mq_hw_ctx *hctx,
- const struct blk_mq_queue_data *bd)
-{
- ide_drive_t *drive = hctx->queue->queuedata;
- ide_hwif_t *hwif = drive->hwif;
-
- spin_lock_irq(&hwif->lock);
- if (drive->sense_rq_active) {
- spin_unlock_irq(&hwif->lock);
- return BLK_STS_DEV_RESOURCE;
- }
- spin_unlock_irq(&hwif->lock);
-
- blk_mq_start_request(bd->rq);
- return ide_issue_rq(drive, bd->rq, false);
-}
-
-static int drive_is_ready(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 stat = 0;
-
- if (drive->waiting_for_dma)
- return hwif->dma_ops->dma_test_irq(drive);
-
- if (hwif->io_ports.ctl_addr &&
- (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0)
- stat = hwif->tp_ops->read_altstatus(hwif);
- else
- /* Note: this may clear a pending IRQ!! */
- stat = hwif->tp_ops->read_status(hwif);
-
- if (stat & ATA_BUSY)
- /* drive busy: definitely not interrupting */
- return 0;
-
- /* drive ready: *might* be interrupting */
- return 1;
-}
-
-/**
- * ide_timer_expiry - handle lack of an IDE interrupt
- * @data: timer callback magic (hwif)
- *
- * An IDE command has timed out before the expected drive return
- * occurred. At this point we attempt to clean up the current
- * mess. If the current handler includes an expiry handler then
- * we invoke the expiry handler, and providing it is happy the
- * work is done. If that fails we apply generic recovery rules
- * invoking the handler and checking the drive DMA status. We
- * have an excessively incestuous relationship with the DMA
- * logic that wants cleaning up.
- */
-
-void ide_timer_expiry (struct timer_list *t)
-{
- ide_hwif_t *hwif = from_timer(hwif, t, timer);
- ide_drive_t *drive;
- ide_handler_t *handler;
- unsigned long flags;
- int wait = -1;
- int plug_device = 0;
- struct request *rq_in_flight;
-
- spin_lock_irqsave(&hwif->lock, flags);
-
- handler = hwif->handler;
-
- if (handler == NULL || hwif->req_gen != hwif->req_gen_timer) {
- /*
- * Either a marginal timeout occurred
- * (got the interrupt just as timer expired),
- * or we were "sleeping" to give other devices a chance.
- * Either way, we don't really want to complain about anything.
- */
- } else {
- ide_expiry_t *expiry = hwif->expiry;
- ide_startstop_t startstop = ide_stopped;
-
- drive = hwif->cur_dev;
-
- if (expiry) {
- wait = expiry(drive);
- if (wait > 0) { /* continue */
- /* reset timer */
- hwif->timer.expires = jiffies + wait;
- hwif->req_gen_timer = hwif->req_gen;
- add_timer(&hwif->timer);
- spin_unlock_irqrestore(&hwif->lock, flags);
- return;
- }
- }
- hwif->handler = NULL;
- hwif->expiry = NULL;
- /*
- * We need to simulate a real interrupt when invoking
- * the handler() function, which means we need to
- * globally mask the specific IRQ:
- */
- spin_unlock(&hwif->lock);
- /* disable_irq_nosync ?? */
- disable_irq(hwif->irq);
-
- if (hwif->polling) {
- startstop = handler(drive);
- } else if (drive_is_ready(drive)) {
- if (drive->waiting_for_dma)
- hwif->dma_ops->dma_lost_irq(drive);
- if (hwif->port_ops && hwif->port_ops->clear_irq)
- hwif->port_ops->clear_irq(drive);
-
- printk(KERN_WARNING "%s: lost interrupt\n",
- drive->name);
- startstop = handler(drive);
- } else {
- if (drive->waiting_for_dma)
- startstop = ide_dma_timeout_retry(drive, wait);
- else
- startstop = ide_error(drive, "irq timeout",
- hwif->tp_ops->read_status(hwif));
- }
- /* Disable interrupts again, `handler' might have enabled it */
- spin_lock_irq(&hwif->lock);
- enable_irq(hwif->irq);
- if (startstop == ide_stopped && hwif->polling == 0) {
- rq_in_flight = hwif->rq;
- hwif->rq = NULL;
- ide_unlock_port(hwif);
- plug_device = 1;
- }
- }
- spin_unlock_irqrestore(&hwif->lock, flags);
-
- if (plug_device) {
- ide_unlock_host(hwif->host);
- ide_requeue_and_plug(drive, rq_in_flight);
- }
-}
-
-/**
- * unexpected_intr - handle an unexpected IDE interrupt
- * @irq: interrupt line
- * @hwif: port being processed
- *
- * There's nothing really useful we can do with an unexpected interrupt,
- * other than reading the status register (to clear it), and logging it.
- * There should be no way that an irq can happen before we're ready for it,
- * so we needn't worry much about losing an "important" interrupt here.
- *
- * On laptops (and "green" PCs), an unexpected interrupt occurs whenever
- * the drive enters "idle", "standby", or "sleep" mode, so if the status
- * looks "good", we just ignore the interrupt completely.
- *
- * This routine assumes __cli() is in effect when called.
- *
- * If an unexpected interrupt happens on irq15 while we are handling irq14
- * and if the two interfaces are "serialized" (CMD640), then it looks like
- * we could screw up by interfering with a new request being set up for
- * irq15.
- *
- * In reality, this is a non-issue. The new command is not sent unless
- * the drive is ready to accept one, in which case we know the drive is
- * not trying to interrupt us. And ide_set_handler() is always invoked
- * before completing the issuance of any new drive command, so we will not
- * be accidentally invoked as a result of any valid command completion
- * interrupt.
- */
-
-static void unexpected_intr(int irq, ide_hwif_t *hwif)
-{
- u8 stat = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
- /* Try to not flood the console with msgs */
- static unsigned long last_msgtime, count;
- ++count;
-
- if (time_after(jiffies, last_msgtime + HZ)) {
- last_msgtime = jiffies;
- printk(KERN_ERR "%s: unexpected interrupt, "
- "status=0x%02x, count=%ld\n",
- hwif->name, stat, count);
- }
- }
-}
-
-/**
- * ide_intr - default IDE interrupt handler
- * @irq: interrupt number
- * @dev_id: hwif
- * @regs: unused weirdness from the kernel irq layer
- *
- * This is the default IRQ handler for the IDE layer. You should
- * not need to override it. If you do be aware it is subtle in
- * places
- *
- * hwif is the interface in the group currently performing
- * a command. hwif->cur_dev is the drive and hwif->handler is
- * the IRQ handler to call. As we issue a command the handlers
- * step through multiple states, reassigning the handler to the
- * next step in the process. Unlike a smart SCSI controller IDE
- * expects the main processor to sequence the various transfer
- * stages. We also manage a poll timer to catch up with most
- * timeout situations. There are still a few where the handlers
- * don't ever decide to give up.
- *
- * The handler eventually returns ide_stopped to indicate the
- * request completed. At this point we issue the next request
- * on the port and the process begins again.
- */
-
-irqreturn_t ide_intr (int irq, void *dev_id)
-{
- ide_hwif_t *hwif = (ide_hwif_t *)dev_id;
- struct ide_host *host = hwif->host;
- ide_drive_t *drive;
- ide_handler_t *handler;
- unsigned long flags;
- ide_startstop_t startstop;
- irqreturn_t irq_ret = IRQ_NONE;
- int plug_device = 0;
- struct request *rq_in_flight;
-
- if (host->host_flags & IDE_HFLAG_SERIALIZE) {
- if (hwif != host->cur_port)
- goto out_early;
- }
-
- spin_lock_irqsave(&hwif->lock, flags);
-
- if (hwif->port_ops && hwif->port_ops->test_irq &&
- hwif->port_ops->test_irq(hwif) == 0)
- goto out;
-
- handler = hwif->handler;
-
- if (handler == NULL || hwif->polling) {
- /*
- * Not expecting an interrupt from this drive.
- * That means this could be:
- * (1) an interrupt from another PCI device
- * sharing the same PCI INT# as us.
- * or (2) a drive just entered sleep or standby mode,
- * and is interrupting to let us know.
- * or (3) a spurious interrupt of unknown origin.
- *
- * For PCI, we cannot tell the difference,
- * so in that case we just ignore it and hope it goes away.
- */
- if ((host->irq_flags & IRQF_SHARED) == 0) {
- /*
- * Probably not a shared PCI interrupt,
- * so we can safely try to do something about it:
- */
- unexpected_intr(irq, hwif);
- } else {
- /*
- * Whack the status register, just in case
- * we have a leftover pending IRQ.
- */
- (void)hwif->tp_ops->read_status(hwif);
- }
- goto out;
- }
-
- drive = hwif->cur_dev;
-
- if (!drive_is_ready(drive))
- /*
- * This happens regularly when we share a PCI IRQ with
- * another device. Unfortunately, it can also happen
- * with some buggy drives that trigger the IRQ before
- * their status register is up to date. Hopefully we have
- * enough advance overhead that the latter isn't a problem.
- */
- goto out;
-
- hwif->handler = NULL;
- hwif->expiry = NULL;
- hwif->req_gen++;
- del_timer(&hwif->timer);
- spin_unlock(&hwif->lock);
-
- if (hwif->port_ops && hwif->port_ops->clear_irq)
- hwif->port_ops->clear_irq(drive);
-
- if (drive->dev_flags & IDE_DFLAG_UNMASK)
- local_irq_enable_in_hardirq();
-
- /* service this interrupt, may set handler for next interrupt */
- startstop = handler(drive);
-
- spin_lock_irq(&hwif->lock);
- /*
- * Note that handler() may have set things up for another
- * interrupt to occur soon, but it cannot happen until
- * we exit from this routine, because it will be the
- * same irq as is currently being serviced here, and Linux
- * won't allow another of the same (on any CPU) until we return.
- */
- if (startstop == ide_stopped && hwif->polling == 0) {
- BUG_ON(hwif->handler);
- rq_in_flight = hwif->rq;
- hwif->rq = NULL;
- ide_unlock_port(hwif);
- plug_device = 1;
- }
- irq_ret = IRQ_HANDLED;
-out:
- spin_unlock_irqrestore(&hwif->lock, flags);
-out_early:
- if (plug_device) {
- ide_unlock_host(hwif->host);
- ide_requeue_and_plug(drive, rq_in_flight);
- }
-
- return irq_ret;
-}
-EXPORT_SYMBOL_GPL(ide_intr);
-
-void ide_pad_transfer(ide_drive_t *drive, int write, int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 buf[4] = { 0 };
-
- while (len > 0) {
- if (write)
- hwif->tp_ops->output_data(drive, NULL, buf, min(4, len));
- else
- hwif->tp_ops->input_data(drive, NULL, buf, min(4, len));
- len -= 4;
- }
-}
-EXPORT_SYMBOL_GPL(ide_pad_transfer);
-
-void ide_insert_request_head(ide_drive_t *drive, struct request *rq)
-{
- drive->sense_rq_active = true;
- list_add_tail(&rq->queuelist, &drive->rq_list);
- kblockd_schedule_work(&drive->rq_work);
-}
-EXPORT_SYMBOL_GPL(ide_insert_request_head);
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
deleted file mode 100644
index 43fbc37d85c3..000000000000
--- a/drivers/ide/ide-ioctls.c
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IDE ioctls handling.
- */
-
-#include <linux/compat.h>
-#include <linux/export.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/slab.h>
-
-static int put_user_long(long val, unsigned long arg)
-{
- if (in_compat_syscall())
- return put_user(val, (compat_long_t __user *)compat_ptr(arg));
-
- return put_user(val, (long __user *)arg);
-}
-
-static const struct ide_ioctl_devset ide_ioctl_settings[] = {
-{ HDIO_GET_32BIT, HDIO_SET_32BIT, &ide_devset_io_32bit },
-{ HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, &ide_devset_keepsettings },
-{ HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, &ide_devset_unmaskirq },
-{ HDIO_GET_DMA, HDIO_SET_DMA, &ide_devset_using_dma },
-{ -1, HDIO_SET_PIO_MODE, &ide_devset_pio_mode },
-{ 0 }
-};
-
-int ide_setting_ioctl(ide_drive_t *drive, struct block_device *bdev,
- unsigned int cmd, unsigned long arg,
- const struct ide_ioctl_devset *s)
-{
- const struct ide_devset *ds;
- int err = -EOPNOTSUPP;
-
- for (; (ds = s->setting); s++) {
- if (ds->get && s->get_ioctl == cmd)
- goto read_val;
- else if (ds->set && s->set_ioctl == cmd)
- goto set_val;
- }
-
- return err;
-
-read_val:
- mutex_lock(&ide_setting_mtx);
- err = ds->get(drive);
- mutex_unlock(&ide_setting_mtx);
- return err >= 0 ? put_user_long(err, arg) : err;
-
-set_val:
- if (bdev_is_partition(bdev))
- err = -EINVAL;
- else {
- if (!capable(CAP_SYS_ADMIN))
- err = -EACCES;
- else {
- mutex_lock(&ide_setting_mtx);
- err = ide_devset_execute(drive, ds, arg);
- mutex_unlock(&ide_setting_mtx);
- }
- }
- return err;
-}
-EXPORT_SYMBOL_GPL(ide_setting_ioctl);
-
-static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd,
- void __user *argp)
-{
- u16 *id = NULL;
- int size = (cmd == HDIO_GET_IDENTITY) ? (ATA_ID_WORDS * 2) : 142;
- int rc = 0;
-
- if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
- rc = -ENOMSG;
- goto out;
- }
-
- /* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */
- id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
- if (id == NULL) {
- rc = -ENOMEM;
- goto out;
- }
-
- memcpy(id, drive->id, size);
- ata_id_to_hd_driveid(id);
-
- if (copy_to_user(argp, id, size))
- rc = -EFAULT;
-
- kfree(id);
-out:
- return rc;
-}
-
-static int ide_get_nice_ioctl(ide_drive_t *drive, unsigned long arg)
-{
- return put_user_long((!!(drive->dev_flags & IDE_DFLAG_DSC_OVERLAP)
- << IDE_NICE_DSC_OVERLAP) |
- (!!(drive->dev_flags & IDE_DFLAG_NICE1)
- << IDE_NICE_1), arg);
-}
-
-static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
-{
- if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
- return -EPERM;
-
- if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
- (drive->media != ide_tape))
- return -EPERM;
-
- if ((arg >> IDE_NICE_DSC_OVERLAP) & 1)
- drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
- else
- drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
-
- if ((arg >> IDE_NICE_1) & 1)
- drive->dev_flags |= IDE_DFLAG_NICE1;
- else
- drive->dev_flags &= ~IDE_DFLAG_NICE1;
-
- return 0;
-}
-
-static int ide_cmd_ioctl(ide_drive_t *drive, void __user *argp)
-{
- u8 *buf = NULL;
- int bufsize = 0, err = 0;
- u8 args[4], xfer_rate = 0;
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
-
- if (NULL == argp) {
- struct request *rq;
-
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_TASKFILE;
- blk_execute_rq(NULL, rq, 0);
- err = scsi_req(rq)->result ? -EIO : 0;
- blk_put_request(rq);
-
- return err;
- }
-
- if (copy_from_user(args, argp, 4))
- return -EFAULT;
-
- memset(&cmd, 0, sizeof(cmd));
- tf->feature = args[2];
- if (args[0] == ATA_CMD_SMART) {
- tf->nsect = args[3];
- tf->lbal = args[1];
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- cmd.valid.out.tf = IDE_VALID_OUT_TF;
- cmd.valid.in.tf = IDE_VALID_NSECT;
- } else {
- tf->nsect = args[1];
- cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT;
- cmd.valid.in.tf = IDE_VALID_NSECT;
- }
- tf->command = args[0];
- cmd.protocol = args[3] ? ATA_PROT_PIO : ATA_PROT_NODATA;
-
- if (args[3]) {
- cmd.tf_flags |= IDE_TFLAG_IO_16BIT;
- bufsize = SECTOR_SIZE * args[3];
- buf = kzalloc(bufsize, GFP_KERNEL);
- if (buf == NULL)
- return -ENOMEM;
- }
-
- if (tf->command == ATA_CMD_SET_FEATURES &&
- tf->feature == SETFEATURES_XFER &&
- tf->nsect >= XFER_SW_DMA_0) {
- xfer_rate = ide_find_dma_mode(drive, tf->nsect);
- if (xfer_rate != tf->nsect) {
- err = -EINVAL;
- goto abort;
- }
-
- cmd.tf_flags |= IDE_TFLAG_SET_XFER;
- }
-
- err = ide_raw_taskfile(drive, &cmd, buf, args[3]);
-
- args[0] = tf->status;
- args[1] = tf->error;
- args[2] = tf->nsect;
-abort:
- if (copy_to_user(argp, &args, 4))
- err = -EFAULT;
- if (buf) {
- if (copy_to_user((argp + 4), buf, bufsize))
- err = -EFAULT;
- kfree(buf);
- }
- return err;
-}
-
-static int ide_task_ioctl(ide_drive_t *drive, void __user *p)
-{
- int err = 0;
- u8 args[7];
- struct ide_cmd cmd;
-
- if (copy_from_user(args, p, 7))
- return -EFAULT;
-
- memset(&cmd, 0, sizeof(cmd));
- memcpy(&cmd.tf.feature, &args[1], 6);
- cmd.tf.command = args[0];
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
-
- err = ide_no_data_taskfile(drive, &cmd);
-
- args[0] = cmd.tf.command;
- memcpy(&args[1], &cmd.tf.feature, 6);
-
- if (copy_to_user(p, args, 7))
- err = -EFAULT;
-
- return err;
-}
-
-static int generic_drive_reset(ide_drive_t *drive)
-{
- struct request *rq;
- int ret = 0;
-
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_MISC;
- scsi_req(rq)->cmd_len = 1;
- scsi_req(rq)->cmd[0] = REQ_DRIVE_RESET;
- blk_execute_rq(NULL, rq, 1);
- ret = scsi_req(rq)->result;
- blk_put_request(rq);
- return ret;
-}
-
-int generic_ide_ioctl(ide_drive_t *drive, struct block_device *bdev,
- unsigned int cmd, unsigned long arg)
-{
- int err;
- void __user *argp = (void __user *)arg;
-
- if (in_compat_syscall())
- argp = compat_ptr(arg);
-
- err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_ioctl_settings);
- if (err != -EOPNOTSUPP)
- return err;
-
- switch (cmd) {
- case HDIO_OBSOLETE_IDENTITY:
- case HDIO_GET_IDENTITY:
- if (bdev_is_partition(bdev))
- return -EINVAL;
- return ide_get_identity_ioctl(drive, cmd, argp);
- case HDIO_GET_NICE:
- return ide_get_nice_ioctl(drive, arg);
- case HDIO_SET_NICE:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- return ide_set_nice_ioctl(drive, arg);
-#ifdef CONFIG_IDE_TASK_IOCTL
- case HDIO_DRIVE_TASKFILE:
- if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
- return -EACCES;
- /* missing compat handler for HDIO_DRIVE_TASKFILE */
- if (in_compat_syscall())
- return -ENOTTY;
- if (drive->media == ide_disk)
- return ide_taskfile_ioctl(drive, arg);
- return -ENOMSG;
-#endif
- case HDIO_DRIVE_CMD:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
- return ide_cmd_ioctl(drive, argp);
- case HDIO_DRIVE_TASK:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
- return ide_task_ioctl(drive, argp);
- case HDIO_DRIVE_RESET:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- return generic_drive_reset(drive);
- case HDIO_GET_BUSSTATE:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- if (put_user_long(BUSSTATE_ON, arg))
- return -EFAULT;
- return 0;
- case HDIO_SET_BUSSTATE:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- return -EOPNOTSUPP;
- default:
- return -EINVAL;
- }
-}
-EXPORT_SYMBOL(generic_ide_ioctl);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
deleted file mode 100644
index f2be127ee96e..000000000000
--- a/drivers/ide/ide-iops.c
+++ /dev/null
@@ -1,536 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2000-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2003 Red Hat
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/blkpg.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/bitops.h>
-#include <linux/nmi.h>
-
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-
-void SELECT_MASK(ide_drive_t *drive, int mask)
-{
- const struct ide_port_ops *port_ops = drive->hwif->port_ops;
-
- if (port_ops && port_ops->maskproc)
- port_ops->maskproc(drive, mask);
-}
-
-u8 ide_read_error(ide_drive_t *drive)
-{
- struct ide_taskfile tf;
-
- drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_ERROR);
-
- return tf.error;
-}
-EXPORT_SYMBOL_GPL(ide_read_error);
-
-void ide_fix_driveid(u16 *id)
-{
-#ifndef __LITTLE_ENDIAN
-# ifdef __BIG_ENDIAN
- int i;
-
- for (i = 0; i < 256; i++)
- id[i] = __le16_to_cpu(id[i]);
-# else
-# error "Please fix <asm/byteorder.h>"
-# endif
-#endif
-}
-
-/*
- * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
- * removing leading/trailing blanks and compressing internal blanks.
- * It is primarily used to tidy up the model name/number fields as
- * returned by the ATA_CMD_ID_ATA[PI] commands.
- */
-
-void ide_fixstring(u8 *s, const int bytecount, const int byteswap)
-{
- u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */
-
- if (byteswap) {
- /* convert from big-endian to host byte order */
- for (p = s ; p != end ; p += 2)
- be16_to_cpus((u16 *) p);
- }
-
- /* strip leading blanks */
- p = s;
- while (s != end && *s == ' ')
- ++s;
- /* compress internal blanks and strip trailing blanks */
- while (s != end && *s) {
- if (*s++ != ' ' || (s != end && *s && *s != ' '))
- *p++ = *(s-1);
- }
- /* wipe out trailing garbage */
- while (p != end)
- *p++ = '\0';
-}
-EXPORT_SYMBOL(ide_fixstring);
-
-/*
- * This routine busy-waits for the drive status to be not "busy".
- * It then checks the status for all of the "good" bits and none
- * of the "bad" bits, and if all is okay it returns 0. All other
- * cases return error -- caller may then invoke ide_error().
- *
- * This routine should get fixed to not hog the cpu during extra long waits..
- * That could be done by busy-waiting for the first jiffy or two, and then
- * setting a timer to wake up at half second intervals thereafter,
- * until timeout is achieved, before timing out.
- */
-int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad,
- unsigned long timeout, u8 *rstat)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- unsigned long flags;
- bool irqs_threaded = force_irqthreads;
- int i;
- u8 stat;
-
- udelay(1); /* spec allows drive 400ns to assert "BUSY" */
- stat = tp_ops->read_status(hwif);
-
- if (stat & ATA_BUSY) {
- if (!irqs_threaded) {
- local_save_flags(flags);
- local_irq_enable_in_hardirq();
- }
- timeout += jiffies;
- while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
- if (time_after(jiffies, timeout)) {
- /*
- * One last read after the timeout in case
- * heavy interrupt load made us not make any
- * progress during the timeout..
- */
- stat = tp_ops->read_status(hwif);
- if ((stat & ATA_BUSY) == 0)
- break;
-
- if (!irqs_threaded)
- local_irq_restore(flags);
- *rstat = stat;
- return -EBUSY;
- }
- }
- if (!irqs_threaded)
- local_irq_restore(flags);
- }
- /*
- * Allow status to settle, then read it again.
- * A few rare drives vastly violate the 400ns spec here,
- * so we'll wait up to 10usec for a "good" status
- * rather than expensively fail things immediately.
- * This fix courtesy of Matthew Faupel & Niccolo Rigacci.
- */
- for (i = 0; i < 10; i++) {
- udelay(1);
- stat = tp_ops->read_status(hwif);
-
- if (OK_STAT(stat, good, bad)) {
- *rstat = stat;
- return 0;
- }
- }
- *rstat = stat;
- return -EFAULT;
-}
-
-/*
- * In case of error returns error value after doing "*startstop = ide_error()".
- * The caller should return the updated value of "startstop" in this case,
- * "startstop" is unchanged when the function returns 0.
- */
-int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good,
- u8 bad, unsigned long timeout)
-{
- int err;
- u8 stat;
-
- /* bail early if we've exceeded max_failures */
- if (drive->max_failures && (drive->failures > drive->max_failures)) {
- *startstop = ide_stopped;
- return 1;
- }
-
- err = __ide_wait_stat(drive, good, bad, timeout, &stat);
-
- if (err) {
- char *s = (err == -EBUSY) ? "status timeout" : "status error";
- *startstop = ide_error(drive, s, stat);
- }
-
- return err;
-}
-EXPORT_SYMBOL(ide_wait_stat);
-
-/**
- * ide_in_drive_list - look for drive in black/white list
- * @id: drive identifier
- * @table: list to inspect
- *
- * Look for a drive in the blacklist and the whitelist tables
- * Returns 1 if the drive is found in the table.
- */
-
-int ide_in_drive_list(u16 *id, const struct drive_list_entry *table)
-{
- for ( ; table->id_model; table++)
- if ((!strcmp(table->id_model, (char *)&id[ATA_ID_PROD])) &&
- (!table->id_firmware ||
- strstr((char *)&id[ATA_ID_FW_REV], table->id_firmware)))
- return 1;
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_in_drive_list);
-
-/*
- * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * Some optical devices with the buggy firmwares have the same problem.
- */
-static const struct drive_list_entry ivb_list[] = {
- { "QUANTUM FIREBALLlct10 05" , "A03.0900" },
- { "QUANTUM FIREBALLlct20 30" , "APL.0900" },
- { "TSSTcorp CDDVDW SH-S202J" , "SB00" },
- { "TSSTcorp CDDVDW SH-S202J" , "SB01" },
- { "TSSTcorp CDDVDW SH-S202N" , "SB00" },
- { "TSSTcorp CDDVDW SH-S202N" , "SB01" },
- { "TSSTcorp CDDVDW SH-S202H" , "SB00" },
- { "TSSTcorp CDDVDW SH-S202H" , "SB01" },
- { "SAMSUNG SP0822N" , "WA100-10" },
- { NULL , NULL }
-};
-
-/*
- * All hosts that use the 80c ribbon must use!
- * The name is derived from upper byte of word 93 and the 80c ribbon.
- */
-u8 eighty_ninty_three(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u16 *id = drive->id;
- int ivb = ide_in_drive_list(id, ivb_list);
-
- if (hwif->cbl == ATA_CBL_SATA || hwif->cbl == ATA_CBL_PATA40_SHORT)
- return 1;
-
- if (ivb)
- printk(KERN_DEBUG "%s: skipping word 93 validity check\n",
- drive->name);
-
- if (ata_id_is_sata(id) && !ivb)
- return 1;
-
- if (hwif->cbl != ATA_CBL_PATA80 && !ivb)
- goto no_80w;
-
- /*
- * FIXME:
- * - change master/slave IDENTIFY order
- * - force bit13 (80c cable present) check also for !ivb devices
- * (unless the slave device is pre-ATA3)
- */
- if (id[ATA_ID_HW_CONFIG] & 0x4000)
- return 1;
-
- if (ivb) {
- const char *model = (char *)&id[ATA_ID_PROD];
-
- if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
- /*
- * These ATAPI devices always report 80c cable
- * so we have to depend on the host in this case.
- */
- if (hwif->cbl == ATA_CBL_PATA80)
- return 1;
- } else {
- /* Depend on the device side cable detection. */
- if (id[ATA_ID_HW_CONFIG] & 0x2000)
- return 1;
- }
- }
-no_80w:
- if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
- return 0;
-
- printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
- "limiting max speed to UDMA33\n",
- drive->name,
- hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host");
-
- drive->dev_flags |= IDE_DFLAG_UDMA33_WARNED;
-
- return 0;
-}
-
-static const char *nien_quirk_list[] = {
- "QUANTUM FIREBALLlct08 08",
- "QUANTUM FIREBALLP KA6.4",
- "QUANTUM FIREBALLP KA9.1",
- "QUANTUM FIREBALLP KX13.6",
- "QUANTUM FIREBALLP KX20.5",
- "QUANTUM FIREBALLP KX27.3",
- "QUANTUM FIREBALLP LM20.4",
- "QUANTUM FIREBALLP LM20.5",
- "FUJITSU MHZ2160BH G2",
- NULL
-};
-
-void ide_check_nien_quirk_list(ide_drive_t *drive)
-{
- const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
- for (list = nien_quirk_list; *list != NULL; list++)
- if (strstr(m, *list) != NULL) {
- drive->dev_flags |= IDE_DFLAG_NIEN_QUIRK;
- return;
- }
-}
-
-int ide_driveid_update(ide_drive_t *drive)
-{
- u16 *id;
- int rc;
-
- id = kmalloc(SECTOR_SIZE, GFP_ATOMIC);
- if (id == NULL)
- return 0;
-
- SELECT_MASK(drive, 1);
- rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id, 1);
- SELECT_MASK(drive, 0);
-
- if (rc)
- goto out_err;
-
- drive->id[ATA_ID_UDMA_MODES] = id[ATA_ID_UDMA_MODES];
- drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES];
- drive->id[ATA_ID_SWDMA_MODES] = id[ATA_ID_SWDMA_MODES];
- drive->id[ATA_ID_CFA_MODES] = id[ATA_ID_CFA_MODES];
- /* anything more ? */
-
- kfree(id);
-
- return 1;
-out_err:
- if (rc == 2)
- printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__);
- kfree(id);
- return 0;
-}
-
-int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- struct ide_taskfile tf;
- u16 *id = drive->id, i;
- int error = 0;
- u8 stat;
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
- if (hwif->dma_ops) /* check if host supports DMA */
- hwif->dma_ops->dma_host_set(drive, 0);
-#endif
-
- /* Skip setting PIO flow-control modes on pre-EIDE drives */
- if ((speed & 0xf8) == XFER_PIO_0 && ata_id_has_iordy(drive->id) == 0)
- goto skip;
-
- /*
- * Don't use ide_wait_cmd here - it will
- * attempt to set_geometry and recalibrate,
- * but for some reason these don't work at
- * this point (lost interrupt).
- */
-
- udelay(1);
- tp_ops->dev_select(drive);
- SELECT_MASK(drive, 1);
- udelay(1);
- tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS);
-
- memset(&tf, 0, sizeof(tf));
- tf.feature = SETFEATURES_XFER;
- tf.nsect = speed;
-
- tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE | IDE_VALID_NSECT);
-
- tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);
-
- if (drive->dev_flags & IDE_DFLAG_NIEN_QUIRK)
- tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
- error = __ide_wait_stat(drive, drive->ready_stat,
- ATA_BUSY | ATA_DRQ | ATA_ERR,
- WAIT_CMD, &stat);
-
- SELECT_MASK(drive, 0);
-
- if (error) {
- (void) ide_dump_status(drive, "set_drive_speed_status", stat);
- return error;
- }
-
- if (speed >= XFER_SW_DMA_0) {
- id[ATA_ID_UDMA_MODES] &= ~0xFF00;
- id[ATA_ID_MWDMA_MODES] &= ~0x0700;
- id[ATA_ID_SWDMA_MODES] &= ~0x0700;
- if (ata_id_is_cfa(id))
- id[ATA_ID_CFA_MODES] &= ~0x0E00;
- } else if (ata_id_is_cfa(id))
- id[ATA_ID_CFA_MODES] &= ~0x01C0;
-
- skip:
-#ifdef CONFIG_BLK_DEV_IDEDMA
- if (speed >= XFER_SW_DMA_0 && (drive->dev_flags & IDE_DFLAG_USING_DMA))
- hwif->dma_ops->dma_host_set(drive, 1);
- else if (hwif->dma_ops) /* check if host supports DMA */
- ide_dma_off_quietly(drive);
-#endif
-
- if (speed >= XFER_UDMA_0) {
- i = 1 << (speed - XFER_UDMA_0);
- id[ATA_ID_UDMA_MODES] |= (i << 8 | i);
- } else if (ata_id_is_cfa(id) && speed >= XFER_MW_DMA_3) {
- i = speed - XFER_MW_DMA_2;
- id[ATA_ID_CFA_MODES] |= i << 9;
- } else if (speed >= XFER_MW_DMA_0) {
- i = 1 << (speed - XFER_MW_DMA_0);
- id[ATA_ID_MWDMA_MODES] |= (i << 8 | i);
- } else if (speed >= XFER_SW_DMA_0) {
- i = 1 << (speed - XFER_SW_DMA_0);
- id[ATA_ID_SWDMA_MODES] |= (i << 8 | i);
- } else if (ata_id_is_cfa(id) && speed >= XFER_PIO_5) {
- i = speed - XFER_PIO_4;
- id[ATA_ID_CFA_MODES] |= i << 6;
- }
-
- if (!drive->init_speed)
- drive->init_speed = speed;
- drive->current_speed = speed;
- return error;
-}
-
-/*
- * This should get invoked any time we exit the driver to
- * wait for an interrupt response from a drive. handler() points
- * at the appropriate code to handle the next interrupt, and a
- * timer is started to prevent us from waiting forever in case
- * something goes wrong (see the ide_timer_expiry() handler later on).
- *
- * See also ide_execute_command
- */
-void __ide_set_handler(ide_drive_t *drive, ide_handler_t *handler,
- unsigned int timeout)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- BUG_ON(hwif->handler);
- hwif->handler = handler;
- hwif->timer.expires = jiffies + timeout;
- hwif->req_gen_timer = hwif->req_gen;
- add_timer(&hwif->timer);
-}
-
-void ide_set_handler(ide_drive_t *drive, ide_handler_t *handler,
- unsigned int timeout)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
-
- spin_lock_irqsave(&hwif->lock, flags);
- __ide_set_handler(drive, handler, timeout);
- spin_unlock_irqrestore(&hwif->lock, flags);
-}
-EXPORT_SYMBOL(ide_set_handler);
-
-/**
- * ide_execute_command - execute an IDE command
- * @drive: IDE drive to issue the command against
- * @cmd: command
- * @handler: handler for next phase
- * @timeout: timeout for command
- *
- * Helper function to issue an IDE command. This handles the
- * atomicity requirements, command timing and ensures that the
- * handler and IRQ setup do not race. All IDE command kick off
- * should go via this function or do equivalent locking.
- */
-
-void ide_execute_command(ide_drive_t *drive, struct ide_cmd *cmd,
- ide_handler_t *handler, unsigned timeout)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
-
- spin_lock_irqsave(&hwif->lock, flags);
- if ((cmd->protocol != ATAPI_PROT_DMA &&
- cmd->protocol != ATAPI_PROT_PIO) ||
- (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT))
- __ide_set_handler(drive, handler, timeout);
- hwif->tp_ops->exec_command(hwif, cmd->tf.command);
- /*
- * Drive takes 400nS to respond, we must avoid the IRQ being
- * serviced before that.
- *
- * FIXME: we could skip this delay with care on non shared devices
- */
- ndelay(400);
- spin_unlock_irqrestore(&hwif->lock, flags);
-}
-
-/*
- * ide_wait_not_busy() waits for the currently selected device on the hwif
- * to report a non-busy status, see comments in ide_probe_port().
- */
-int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
-{
- u8 stat = 0;
-
- while (timeout--) {
- /*
- * Turn this into a schedule() sleep once I'm sure
- * about locking issues (2.5 work ?).
- */
- mdelay(1);
- stat = hwif->tp_ops->read_status(hwif);
- if ((stat & ATA_BUSY) == 0)
- return 0;
- /*
- * Assume a value of 0xff means nothing is connected to
- * the interface and it doesn't implement the pull-down
- * resistor on D7.
- */
- if (stat == 0xff)
- return -ENODEV;
- touch_nmi_watchdog();
- }
- return -EBUSY;
-}
diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c
deleted file mode 100644
index be65b411ab53..000000000000
--- a/drivers/ide/ide-legacy.c
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ide.h>
-
-static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw,
- u8 port_no, const struct ide_port_info *d,
- unsigned long config)
-{
- unsigned long base, ctl;
- int irq;
-
- if (port_no == 0) {
- base = 0x1f0;
- ctl = 0x3f6;
- irq = 14;
- } else {
- base = 0x170;
- ctl = 0x376;
- irq = 15;
- }
-
- if (!request_region(base, 8, d->name)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- d->name, base, base + 7);
- return;
- }
-
- if (!request_region(ctl, 1, d->name)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- d->name, ctl);
- release_region(base, 8);
- return;
- }
-
- ide_std_init_ports(hw, base, ctl);
- hw->irq = irq;
- hw->config = config;
-
- hws[port_no] = hw;
-}
-
-int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
-{
- struct ide_hw hw[2], *hws[] = { NULL, NULL };
-
- memset(&hw, 0, sizeof(hw));
-
- if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0)
- ide_legacy_init_one(hws, &hw[0], 0, d, config);
- ide_legacy_init_one(hws, &hw[1], 1, d, config);
-
- if (hws[0] == NULL && hws[1] == NULL &&
- (d->host_flags & IDE_HFLAG_SINGLE))
- return -ENOENT;
-
- return ide_host_add(d, hws, 2, NULL);
-}
-EXPORT_SYMBOL_GPL(ide_legacy_device_add);
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
deleted file mode 100644
index 7b9f655adbc2..000000000000
--- a/drivers/ide/ide-lib.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/ide.h>
-#include <linux/bitops.h>
-
-u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48)
-{
- struct ide_taskfile *tf = &cmd->tf;
- u32 high, low;
-
- low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
- if (lba48) {
- tf = &cmd->hob;
- high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
- } else
- high = tf->device & 0xf;
-
- return ((u64)high << 24) | low;
-}
-EXPORT_SYMBOL_GPL(ide_get_lba_addr);
-
-static void ide_dump_sector(ide_drive_t *drive)
-{
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
- u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
-
- memset(&cmd, 0, sizeof(cmd));
- if (lba48) {
- cmd.valid.in.tf = IDE_VALID_LBA;
- cmd.valid.in.hob = IDE_VALID_LBA;
- cmd.tf_flags = IDE_TFLAG_LBA48;
- } else
- cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE;
-
- ide_tf_readback(drive, &cmd);
-
- if (lba48 || (tf->device & ATA_LBA))
- printk(KERN_CONT ", LBAsect=%llu",
- (unsigned long long)ide_get_lba_addr(&cmd, lba48));
- else
- printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
- tf->device & 0xf, tf->lbal);
-}
-
-static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
-{
- printk(KERN_CONT "{ ");
- if (err & ATA_ABORTED)
- printk(KERN_CONT "DriveStatusError ");
- if (err & ATA_ICRC)
- printk(KERN_CONT "%s",
- (err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
- if (err & ATA_UNC)
- printk(KERN_CONT "UncorrectableError ");
- if (err & ATA_IDNF)
- printk(KERN_CONT "SectorIdNotFound ");
- if (err & ATA_TRK0NF)
- printk(KERN_CONT "TrackZeroNotFound ");
- if (err & ATA_AMNF)
- printk(KERN_CONT "AddrMarkNotFound ");
- printk(KERN_CONT "}");
- if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
- (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
- struct request *rq = drive->hwif->rq;
-
- ide_dump_sector(drive);
-
- if (rq)
- printk(KERN_CONT ", sector=%llu",
- (unsigned long long)blk_rq_pos(rq));
- }
- printk(KERN_CONT "\n");
-}
-
-static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
-{
- printk(KERN_CONT "{ ");
- if (err & ATAPI_ILI)
- printk(KERN_CONT "IllegalLengthIndication ");
- if (err & ATAPI_EOM)
- printk(KERN_CONT "EndOfMedia ");
- if (err & ATA_ABORTED)
- printk(KERN_CONT "AbortedCommand ");
- if (err & ATA_MCR)
- printk(KERN_CONT "MediaChangeRequested ");
- if (err & ATAPI_LFS)
- printk(KERN_CONT "LastFailedSense=0x%02x ",
- (err & ATAPI_LFS) >> 4);
- printk(KERN_CONT "}\n");
-}
-
-/**
- * ide_dump_status - translate ATA/ATAPI error
- * @drive: drive that status applies to
- * @msg: text message to print
- * @stat: status byte to decode
- *
- * Error reporting, in human readable form (luxurious, but a memory hog).
- * Combines the drive name, message and status byte to provide a
- * user understandable explanation of the device error.
- */
-
-u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
-{
- u8 err = 0;
-
- printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat);
- if (stat & ATA_BUSY)
- printk(KERN_CONT "Busy ");
- else {
- if (stat & ATA_DRDY)
- printk(KERN_CONT "DriveReady ");
- if (stat & ATA_DF)
- printk(KERN_CONT "DeviceFault ");
- if (stat & ATA_DSC)
- printk(KERN_CONT "SeekComplete ");
- if (stat & ATA_DRQ)
- printk(KERN_CONT "DataRequest ");
- if (stat & ATA_CORR)
- printk(KERN_CONT "CorrectedError ");
- if (stat & ATA_SENSE)
- printk(KERN_CONT "Sense ");
- if (stat & ATA_ERR)
- printk(KERN_CONT "Error ");
- }
- printk(KERN_CONT "}\n");
- if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
- err = ide_read_error(drive);
- printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err);
- if (drive->media == ide_disk)
- ide_dump_ata_error(drive, err);
- else
- ide_dump_atapi_error(drive, err);
- }
-
- printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n",
- drive->name, drive->hwif->cmd.tf.command);
-
- return err;
-}
-EXPORT_SYMBOL(ide_dump_status);
diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c
deleted file mode 100644
index a80a0f28f7b9..000000000000
--- a/drivers/ide/ide-park.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/ide.h>
-#include <linux/jiffies.h>
-#include <linux/blkdev.h>
-
-DECLARE_WAIT_QUEUE_HEAD(ide_park_wq);
-
-static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request_queue *q = drive->queue;
- struct request *rq;
- int rc;
-
- timeout += jiffies;
- spin_lock_irq(&hwif->lock);
- if (drive->dev_flags & IDE_DFLAG_PARKED) {
- int reset_timer = time_before(timeout, drive->sleep);
- int start_queue = 0;
-
- drive->sleep = timeout;
- wake_up_all(&ide_park_wq);
- if (reset_timer && del_timer(&hwif->timer))
- start_queue = 1;
- spin_unlock_irq(&hwif->lock);
-
- if (start_queue)
- blk_mq_run_hw_queues(q, true);
- return;
- }
- spin_unlock_irq(&hwif->lock);
-
- rq = blk_get_request(q, REQ_OP_DRV_IN, 0);
- scsi_req(rq)->cmd[0] = REQ_PARK_HEADS;
- scsi_req(rq)->cmd_len = 1;
- ide_req(rq)->type = ATA_PRIV_MISC;
- ide_req(rq)->special = &timeout;
- blk_execute_rq(NULL, rq, 1);
- rc = scsi_req(rq)->result ? -EIO : 0;
- blk_put_request(rq);
- if (rc)
- goto out;
-
- /*
- * Make sure that *some* command is sent to the drive after the
- * timeout has expired, so power management will be reenabled.
- */
- rq = blk_get_request(q, REQ_OP_DRV_IN, BLK_MQ_REQ_NOWAIT);
- if (IS_ERR(rq))
- goto out;
-
- scsi_req(rq)->cmd[0] = REQ_UNPARK_HEADS;
- scsi_req(rq)->cmd_len = 1;
- ide_req(rq)->type = ATA_PRIV_MISC;
- spin_lock_irq(&hwif->lock);
- ide_insert_request_head(drive, rq);
- spin_unlock_irq(&hwif->lock);
-
-out:
- return;
-}
-
-ide_startstop_t ide_do_park_unpark(ide_drive_t *drive, struct request *rq)
-{
- struct ide_cmd cmd;
- struct ide_taskfile *tf = &cmd.tf;
-
- memset(&cmd, 0, sizeof(cmd));
- if (scsi_req(rq)->cmd[0] == REQ_PARK_HEADS) {
- drive->sleep = *(unsigned long *)ide_req(rq)->special;
- drive->dev_flags |= IDE_DFLAG_SLEEPING;
- tf->command = ATA_CMD_IDLEIMMEDIATE;
- tf->feature = 0x44;
- tf->lbal = 0x4c;
- tf->lbam = 0x4e;
- tf->lbah = 0x55;
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- } else /* cmd == REQ_UNPARK_HEADS */
- tf->command = ATA_CMD_CHK_POWER;
-
- cmd.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER;
- cmd.protocol = ATA_PROT_NODATA;
-
- cmd.rq = rq;
-
- return do_rw_taskfile(drive, &cmd);
-}
-
-ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- ide_hwif_t *hwif = drive->hwif;
- unsigned long now;
- unsigned int msecs;
-
- if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
- return -EOPNOTSUPP;
-
- spin_lock_irq(&hwif->lock);
- now = jiffies;
- if (drive->dev_flags & IDE_DFLAG_PARKED &&
- time_after(drive->sleep, now))
- msecs = jiffies_to_msecs(drive->sleep - now);
- else
- msecs = 0;
- spin_unlock_irq(&hwif->lock);
-
- return snprintf(buf, 20, "%u\n", msecs);
-}
-
-ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-{
-#define MAX_PARK_TIMEOUT 30000
- ide_drive_t *drive = to_ide_device(dev);
- long int input;
- int rc;
-
- rc = kstrtol(buf, 10, &input);
- if (rc)
- return rc;
- if (input < -2)
- return -EINVAL;
- if (input > MAX_PARK_TIMEOUT) {
- input = MAX_PARK_TIMEOUT;
- rc = -EOVERFLOW;
- }
-
- mutex_lock(&ide_setting_mtx);
- if (input >= 0) {
- if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
- rc = -EOPNOTSUPP;
- else if (input || drive->dev_flags & IDE_DFLAG_PARKED)
- issue_park_cmd(drive, msecs_to_jiffies(input));
- } else {
- if (drive->media == ide_disk)
- switch (input) {
- case -1:
- drive->dev_flags &= ~IDE_DFLAG_NO_UNLOAD;
- break;
- case -2:
- drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
- break;
- }
- else
- rc = -EOPNOTSUPP;
- }
- mutex_unlock(&ide_setting_mtx);
-
- return rc ? rc : len;
-}
diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c
deleted file mode 100644
index 673420db953f..000000000000
--- a/drivers/ide/ide-pci-generic.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright (C) 2001-2002 Andre Hedrick <andre@...ux-ide.org>
- * Portions (C) Copyright 2002 Red Hat Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * For the avoidance of doubt the "preferred form" of this code is one which
- * is in an open non patent encumbered format. Where cryptographic key signing
- * forms part of the process of creating an executable the information
- * including keys needed to generate an equivalently functional executable
- * are deemed to be part of the source code.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "ide_pci_generic"
-
-static bool ide_generic_all; /* Set to claim all devices */
-
-module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
-MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
-
-static void netcell_quirkproc(ide_drive_t *drive)
-{
- /* mark words 85-87 as valid */
- drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000;
-}
-
-static const struct ide_port_ops netcell_port_ops = {
- .quirkproc = netcell_quirkproc,
-};
-
-#define DECLARE_GENERIC_PCI_DEV(extra_flags) \
- { \
- .name = DRV_NAME, \
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \
- extra_flags, \
- .swdma_mask = ATA_SWDMA2, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = ATA_UDMA6, \
- }
-
-static const struct ide_port_info generic_chipsets[] = {
- /* 0: Unknown */
- DECLARE_GENERIC_PCI_DEV(0),
-
- { /* 1: NS87410 */
- .name = DRV_NAME,
- .enablebits = { {0x43, 0x08, 0x08}, {0x47, 0x08, 0x08} },
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
- },
-
- /* 2: SAMURAI / HT6565 / HINT_IDE */
- DECLARE_GENERIC_PCI_DEV(0),
- /* 3: UM8673F / UM8886A / UM8886BF */
- DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_DMA),
- /* 4: VIA_IDE / OPTI621V / Piccolo010{2,3,5} */
- DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_AUTODMA),
-
- { /* 5: VIA8237SATA */
- .name = DRV_NAME,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
- IDE_HFLAG_OFF_BOARD,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
- },
-
- { /* 6: Revolution */
- .name = DRV_NAME,
- .port_ops = &netcell_port_ops,
- .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
- IDE_HFLAG_TRUST_BIOS_FOR_DMA |
- IDE_HFLAG_OFF_BOARD,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
- }
-};
-
-/**
- * generic_init_one - called when a PIIX is found
- * @dev: the generic device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d = &generic_chipsets[id->driver_data];
- int ret = -ENODEV;
-
- /* Don't use the generic entry unless instructed to do so */
- if (id->driver_data == 0 && ide_generic_all == 0)
- goto out;
-
- switch (dev->vendor) {
- case PCI_VENDOR_ID_UMC:
- if (dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
- !(PCI_FUNC(dev->devfn) & 1))
- goto out; /* UM8886A/BF pair */
- break;
- case PCI_VENDOR_ID_OPTI:
- if (dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
- !(PCI_FUNC(dev->devfn) & 1))
- goto out;
- break;
- case PCI_VENDOR_ID_JMICRON:
- if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 &&
- PCI_FUNC(dev->devfn) != 1)
- goto out;
- break;
- case PCI_VENDOR_ID_NS:
- if (dev->device == PCI_DEVICE_ID_NS_87410 &&
- (dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
- goto out;
- break;
- }
-
- if (dev->vendor != PCI_VENDOR_ID_JMICRON) {
- u16 command;
- pci_read_config_word(dev, PCI_COMMAND, &command);
- if (!(command & PCI_COMMAND_IO)) {
- printk(KERN_INFO "%s %s: skipping disabled "
- "controller\n", d->name, pci_name(dev));
- goto out;
- }
- }
- ret = ide_pci_init_one(dev, d, NULL);
-out:
- return ret;
-}
-
-static const struct pci_device_id generic_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), 1 },
- { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), 2 },
- { PCI_VDEVICE(HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), 2 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8673F), 3 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886A), 3 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886BF), 3 },
- { PCI_VDEVICE(HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), 2 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C561), 4 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C558), 4 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237_SATA), 5 },
-#endif
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), 4 },
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), 4 },
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), 4 },
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), 4 },
- { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), 6 },
- /*
- * Must come last. If you add entries adjust
- * this table and generic_chipsets[] appropriately.
- */
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, generic_pci_tbl);
-
-static struct pci_driver generic_pci_driver = {
- .name = "PCI_IDE",
- .id_table = generic_pci_tbl,
- .probe = generic_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init generic_ide_init(void)
-{
- return ide_pci_register_driver(&generic_pci_driver);
-}
-
-static void __exit generic_ide_exit(void)
-{
- pci_unregister_driver(&generic_pci_driver);
-}
-
-module_init(generic_ide_init);
-module_exit(generic_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for generic PCI IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-pio-blacklist.c b/drivers/ide/ide-pio-blacklist.c
deleted file mode 100644
index 1fd24798e5c9..000000000000
--- a/drivers/ide/ide-pio-blacklist.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PIO blacklist. Some drives incorrectly report their maximal PIO mode,
- * at least in respect to CMD640. Here we keep info on some known drives.
- *
- * Changes to the ide_pio_blacklist[] should be made with EXTREME CAUTION
- * to avoid breaking the fragile cmd640.c support.
- */
-
-#include <linux/string.h>
-#include <linux/ide.h>
-
-static struct ide_pio_info {
- const char *name;
- int pio;
-} ide_pio_blacklist [] = {
- { "Conner Peripherals 540MB - CFS540A", 3 },
-
- { "WDC AC2700", 3 },
- { "WDC AC2540", 3 },
- { "WDC AC2420", 3 },
- { "WDC AC2340", 3 },
- { "WDC AC2250", 0 },
- { "WDC AC2200", 0 },
- { "WDC AC21200", 4 },
- { "WDC AC2120", 0 },
- { "WDC AC2850", 3 },
- { "WDC AC1270", 3 },
- { "WDC AC1170", 1 },
- { "WDC AC1210", 1 },
- { "WDC AC280", 0 },
- { "WDC AC31000", 3 },
- { "WDC AC31200", 3 },
-
- { "Maxtor 7131 AT", 1 },
- { "Maxtor 7171 AT", 1 },
- { "Maxtor 7213 AT", 1 },
- { "Maxtor 7245 AT", 1 },
- { "Maxtor 7345 AT", 1 },
- { "Maxtor 7546 AT", 3 },
- { "Maxtor 7540 AV", 3 },
-
- { "SAMSUNG SHD-3121A", 1 },
- { "SAMSUNG SHD-3122A", 1 },
- { "SAMSUNG SHD-3172A", 1 },
-
- { "ST5660A", 3 },
- { "ST3660A", 3 },
- { "ST3630A", 3 },
- { "ST3655A", 3 },
- { "ST3391A", 3 },
- { "ST3390A", 1 },
- { "ST3600A", 1 },
- { "ST3290A", 0 },
- { "ST3144A", 0 },
- { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on drive)
- according to Seagate's FIND-ATA program */
-
- { "QUANTUM ELS127A", 0 },
- { "QUANTUM ELS170A", 0 },
- { "QUANTUM LPS240A", 0 },
- { "QUANTUM LPS210A", 3 },
- { "QUANTUM LPS270A", 3 },
- { "QUANTUM LPS365A", 3 },
- { "QUANTUM LPS540A", 3 },
- { "QUANTUM LIGHTNING 540A", 3 },
- { "QUANTUM LIGHTNING 730A", 3 },
-
- { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */
- { "QUANTUM FIREBALL_640", 3 },
- { "QUANTUM FIREBALL_1080", 3 },
- { "QUANTUM FIREBALL_1280", 3 },
- { NULL, 0 }
-};
-
-/**
- * ide_scan_pio_blacklist - check for a blacklisted drive
- * @model: Drive model string
- *
- * This routine searches the ide_pio_blacklist for an entry
- * matching the start/whole of the supplied model name.
- *
- * Returns -1 if no match found.
- * Otherwise returns the recommended PIO mode from ide_pio_blacklist[].
- */
-
-int ide_scan_pio_blacklist(char *model)
-{
- struct ide_pio_info *p;
-
- for (p = ide_pio_blacklist; p->name != NULL; p++) {
- if (strncmp(p->name, model, strlen(p->name)) == 0)
- return p->pio;
- }
- return -1;
-}
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
deleted file mode 100644
index d680b3e3295f..000000000000
--- a/drivers/ide/ide-pm.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/ide.h>
-
-int generic_ide_suspend(struct device *dev, pm_message_t mesg)
-{
- ide_drive_t *drive = to_ide_device(dev);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq;
- struct ide_pm_state rqpm;
- int ret;
-
- if (ide_port_acpi(hwif)) {
- /* call ACPI _GTM only once */
- if ((drive->dn & 1) == 0 || pair == NULL)
- ide_acpi_get_timing(hwif);
- }
-
- memset(&rqpm, 0, sizeof(rqpm));
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
- ide_req(rq)->special = &rqpm;
- rqpm.pm_step = IDE_PM_START_SUSPEND;
- if (mesg.event == PM_EVENT_PRETHAW)
- mesg.event = PM_EVENT_FREEZE;
- rqpm.pm_state = mesg.event;
-
- blk_execute_rq(NULL, rq, 0);
- ret = scsi_req(rq)->result ? -EIO : 0;
- blk_put_request(rq);
-
- if (ret == 0 && ide_port_acpi(hwif)) {
- /* call ACPI _PS3 only after both devices are suspended */
- if ((drive->dn & 1) || pair == NULL)
- ide_acpi_set_state(hwif, 0);
- }
-
- return ret;
-}
-
-static int ide_pm_execute_rq(struct request *rq)
-{
- struct request_queue *q = rq->q;
-
- if (unlikely(blk_queue_dying(q))) {
- rq->rq_flags |= RQF_QUIET;
- scsi_req(rq)->result = -ENXIO;
- blk_mq_end_request(rq, BLK_STS_OK);
- return -ENXIO;
- }
- blk_execute_rq(NULL, rq, true);
-
- return scsi_req(rq)->result ? -EIO : 0;
-}
-
-int generic_ide_resume(struct device *dev)
-{
- ide_drive_t *drive = to_ide_device(dev);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq;
- struct ide_pm_state rqpm;
- int err;
-
- blk_mq_start_stopped_hw_queues(drive->queue, true);
-
- if (ide_port_acpi(hwif)) {
- /* call ACPI _PS0 / _STM only once */
- if ((drive->dn & 1) == 0 || pair == NULL) {
- ide_acpi_set_state(hwif, 1);
- ide_acpi_push_timing(hwif);
- }
-
- ide_acpi_exec_tfs(drive);
- }
-
- memset(&rqpm, 0, sizeof(rqpm));
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PM);
- ide_req(rq)->type = ATA_PRIV_PM_RESUME;
- ide_req(rq)->special = &rqpm;
- rqpm.pm_step = IDE_PM_START_RESUME;
- rqpm.pm_state = PM_EVENT_ON;
-
- err = ide_pm_execute_rq(rq);
- blk_put_request(rq);
-
- if (err == 0 && dev->driver) {
- struct ide_driver *drv = to_ide_driver(dev->driver);
-
- if (drv->resume)
- drv->resume(drive);
- }
-
- return err;
-}
-
-void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct ide_pm_state *pm = ide_req(rq)->special;
-
-#ifdef DEBUG_PM
- printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
- drive->name, pm->pm_step);
-#endif
- if (drive->media != ide_disk)
- return;
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = IDE_PM_COMPLETED;
- else
- pm->pm_step = IDE_PM_STANDBY;
- break;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- pm->pm_step = IDE_PM_COMPLETED;
- break;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- pm->pm_step = IDE_PM_IDLE;
- break;
- case IDE_PM_IDLE: /* Resume step 2 (idle)*/
- pm->pm_step = IDE_PM_RESTORE_DMA;
- break;
- }
-}
-
-ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct ide_pm_state *pm = ide_req(rq)->special;
- struct ide_cmd cmd = { };
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (drive->media != ide_disk)
- break;
- /* Not supported? Switch to next step now. */
- if (ata_id_flush_enabled(drive->id) == 0 ||
- (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- }
- if (ata_id_flush_ext_enabled(drive->id))
- cmd.tf.command = ATA_CMD_FLUSH_EXT;
- else
- cmd.tf.command = ATA_CMD_FLUSH;
- goto out_do_tf;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- cmd.tf.command = ATA_CMD_STANDBYNOW1;
- goto out_do_tf;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- ide_set_max_pio(drive);
- /*
- * skip IDE_PM_IDLE for ATAPI devices
- */
- if (drive->media != ide_disk)
- pm->pm_step = IDE_PM_RESTORE_DMA;
- else
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- case IDE_PM_IDLE: /* Resume step 2 (idle) */
- cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
- goto out_do_tf;
- case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
- /*
- * Right now, all we do is call ide_set_dma(drive),
- * we could be smarter and check for current xfer_speed
- * in struct drive etc...
- */
- if (drive->hwif->dma_ops == NULL)
- break;
- /*
- * TODO: respect IDE_DFLAG_USING_DMA
- */
- ide_set_dma(drive);
- break;
- }
-
- pm->pm_step = IDE_PM_COMPLETED;
-
- return ide_stopped;
-
-out_do_tf:
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- cmd.protocol = ATA_PROT_NODATA;
-
- return do_rw_taskfile(drive, &cmd);
-}
-
-/**
- * ide_complete_pm_rq - end the current Power Management request
- * @drive: target drive
- * @rq: request
- *
- * This function cleans up the current PM request and stops the queue
- * if necessary.
- */
-void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
-{
- struct request_queue *q = drive->queue;
- struct ide_pm_state *pm = ide_req(rq)->special;
-
- ide_complete_power_step(drive, rq);
- if (pm->pm_step != IDE_PM_COMPLETED)
- return;
-
-#ifdef DEBUG_PM
- printk("%s: completing PM request, %s\n", drive->name,
- (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
-#endif
- if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
- blk_mq_stop_hw_queues(q);
- else
- drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
-
- drive->hwif->rq = NULL;
-
- blk_mq_end_request(rq, BLK_STS_OK);
-}
-
-void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
-{
- struct ide_pm_state *pm = ide_req(rq)->special;
-
- if (blk_rq_is_private(rq) &&
- ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
- pm->pm_step == IDE_PM_START_SUSPEND)
- /* Mark drive blocked when starting the suspend sequence. */
- drive->dev_flags |= IDE_DFLAG_BLOCKED;
- else if (blk_rq_is_private(rq) &&
- ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
- pm->pm_step == IDE_PM_START_RESUME) {
- /*
- * The first thing we do on wakeup is to wait for BSY bit to
- * go away (with a looong timeout) as a drive on this hwif may
- * just be POSTing itself.
- * We do that before even selecting as the "other" device on
- * the bus may be broken enough to walk on our toes at this
- * point.
- */
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- struct request_queue *q = drive->queue;
- int rc;
-#ifdef DEBUG_PM
- printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
- tp_ops->dev_select(drive);
- tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
- rc = ide_wait_not_busy(hwif, 100000);
- if (rc)
- printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
-
- blk_mq_start_hw_queues(q);
- }
-}
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
deleted file mode 100644
index fc541f1cf8de..000000000000
--- a/drivers/ide/ide-pnp.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * This file provides autodetection for ISA PnP IDE interfaces.
- * It was tested with "ESS ES1868 Plug and Play AudioDrive" IDE interface.
- *
- * Copyright (C) 2000 Andrey Panin <pazke@...pac.ru>
- */
-
-#include <linux/init.h>
-#include <linux/pnp.h>
-#include <linux/ide.h>
-#include <linux/module.h>
-
-#define DRV_NAME "ide-pnp"
-
-/* Add your devices here :)) */
-static const struct pnp_device_id idepnp_devices[] = {
- /* Generic ESDI/IDE/ATA compatible hard disk controller */
- {.id = "PNP0600", .driver_data = 0},
- {.id = ""}
-};
-
-static const struct ide_port_info ide_pnp_port_info = {
- .host_flags = IDE_HFLAG_NO_DMA,
- .chipset = ide_generic,
-};
-
-static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
-{
- struct ide_host *host;
- unsigned long base, ctl;
- int rc;
- struct ide_hw hw, *hws[] = { &hw };
-
- printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n");
-
- if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0)))
- return -1;
-
- base = pnp_port_start(dev, 0);
- ctl = pnp_port_start(dev, 1);
-
- if (!request_region(base, 8, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- DRV_NAME, base, base + 7);
- return -EBUSY;
- }
-
- if (!request_region(ctl, 1, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- DRV_NAME, ctl);
- release_region(base, 8);
- return -EBUSY;
- }
-
- memset(&hw, 0, sizeof(hw));
- ide_std_init_ports(&hw, base, ctl);
- hw.irq = pnp_irq(dev, 0);
-
- rc = ide_host_add(&ide_pnp_port_info, hws, 1, &host);
- if (rc)
- goto out;
-
- pnp_set_drvdata(dev, host);
-
- return 0;
-out:
- release_region(ctl, 1);
- release_region(base, 8);
-
- return rc;
-}
-
-static void idepnp_remove(struct pnp_dev *dev)
-{
- struct ide_host *host = pnp_get_drvdata(dev);
-
- ide_host_remove(host);
-
- release_region(pnp_port_start(dev, 1), 1);
- release_region(pnp_port_start(dev, 0), 8);
-}
-
-static struct pnp_driver idepnp_driver = {
- .name = "ide",
- .id_table = idepnp_devices,
- .probe = idepnp_probe,
- .remove = idepnp_remove,
-};
-
-module_pnp_driver(idepnp_driver);
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
deleted file mode 100644
index aefd74c0d862..000000000000
--- a/drivers/ide/ide-probe.c
+++ /dev/null
@@ -1,1623 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
- * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
- */
-
-/*
- * Mostly written by Mark Lord <mlord@...ox.com>
- * and Gadi Oxman <gadio@...vision.net.il>
- * and Andre Hedrick <andre@...ux-ide.org>
- *
- * See linux/MAINTAINERS for address of current maintainer.
- *
- * This is the IDE probe module, as evolved from hd.c and ide.c.
- *
- * -- increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
- * by Andrea Arcangeli
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/spinlock.h>
-#include <linux/kmod.h>
-#include <linux/pci.h>
-#include <linux/scatterlist.h>
-
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-
-/**
- * generic_id - add a generic drive id
- * @drive: drive to make an ID block for
- *
- * Add a fake id field to the drive we are passed. This allows
- * use to skip a ton of NULL checks (which people always miss)
- * and make drive properties unconditional outside of this file
- */
-
-static void generic_id(ide_drive_t *drive)
-{
- u16 *id = drive->id;
-
- id[ATA_ID_CUR_CYLS] = id[ATA_ID_CYLS] = drive->cyl;
- id[ATA_ID_CUR_HEADS] = id[ATA_ID_HEADS] = drive->head;
- id[ATA_ID_CUR_SECTORS] = id[ATA_ID_SECTORS] = drive->sect;
-}
-
-static void ide_disk_init_chs(ide_drive_t *drive)
-{
- u16 *id = drive->id;
-
- /* Extract geometry if we did not already have one for the drive */
- if (!drive->cyl || !drive->head || !drive->sect) {
- drive->cyl = drive->bios_cyl = id[ATA_ID_CYLS];
- drive->head = drive->bios_head = id[ATA_ID_HEADS];
- drive->sect = drive->bios_sect = id[ATA_ID_SECTORS];
- }
-
- /* Handle logical geometry translation by the drive */
- if (ata_id_current_chs_valid(id)) {
- drive->cyl = id[ATA_ID_CUR_CYLS];
- drive->head = id[ATA_ID_CUR_HEADS];
- drive->sect = id[ATA_ID_CUR_SECTORS];
- }
-
- /* Use physical geometry if what we have still makes no sense */
- if (drive->head > 16 && id[ATA_ID_HEADS] && id[ATA_ID_HEADS] <= 16) {
- drive->cyl = id[ATA_ID_CYLS];
- drive->head = id[ATA_ID_HEADS];
- drive->sect = id[ATA_ID_SECTORS];
- }
-}
-
-static void ide_disk_init_mult_count(ide_drive_t *drive)
-{
- u16 *id = drive->id;
- u8 max_multsect = id[ATA_ID_MAX_MULTSECT] & 0xff;
-
- if (max_multsect) {
- if ((max_multsect / 2) > 1)
- id[ATA_ID_MULTSECT] = max_multsect | 0x100;
- else
- id[ATA_ID_MULTSECT] &= ~0x1ff;
-
- drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
-
- if (drive->mult_req)
- drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
- }
-}
-
-static void ide_classify_ata_dev(ide_drive_t *drive)
-{
- u16 *id = drive->id;
- char *m = (char *)&id[ATA_ID_PROD];
- int is_cfa = ata_id_is_cfa(id);
-
- /* CF devices are *not* removable in Linux definition of the term */
- if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-
- drive->media = ide_disk;
-
- if (!ata_id_has_unload(drive->id))
- drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
-
- printk(KERN_INFO "%s: %s, %s DISK drive\n", drive->name, m,
- is_cfa ? "CFA" : "ATA");
-}
-
-static void ide_classify_atapi_dev(ide_drive_t *drive)
-{
- u16 *id = drive->id;
- char *m = (char *)&id[ATA_ID_PROD];
- u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;
-
- printk(KERN_INFO "%s: %s, ATAPI ", drive->name, m);
- switch (type) {
- case ide_floppy:
- if (!strstr(m, "CD-ROM")) {
- if (!strstr(m, "oppy") &&
- !strstr(m, "poyp") &&
- !strstr(m, "ZIP"))
- printk(KERN_CONT "cdrom or floppy?, assuming ");
- if (drive->media != ide_cdrom) {
- printk(KERN_CONT "FLOPPY");
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
- break;
- }
- }
- /* Early cdrom models used zero */
- type = ide_cdrom;
- fallthrough;
- case ide_cdrom:
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-#ifdef CONFIG_PPC
- /* kludge for Apple PowerBook internal zip */
- if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
- printk(KERN_CONT "FLOPPY");
- type = ide_floppy;
- break;
- }
-#endif
- printk(KERN_CONT "CD/DVD-ROM");
- break;
- case ide_tape:
- printk(KERN_CONT "TAPE");
- break;
- case ide_optical:
- printk(KERN_CONT "OPTICAL");
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
- break;
- default:
- printk(KERN_CONT "UNKNOWN (type %d)", type);
- break;
- }
-
- printk(KERN_CONT " drive\n");
- drive->media = type;
- /* an ATAPI device ignores DRDY */
- drive->ready_stat = 0;
- if (ata_id_cdb_intr(id))
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
- drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
- /* we don't do head unloading on ATAPI devices */
- drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
-}
-
-/**
- * do_identify - identify a drive
- * @drive: drive to identify
- * @cmd: command used
- * @id: buffer for IDENTIFY data
- *
- * Called when we have issued a drive identify command to
- * read and parse the results. This function is run with
- * interrupts disabled.
- */
-
-static void do_identify(ide_drive_t *drive, u8 cmd, u16 *id)
-{
- ide_hwif_t *hwif = drive->hwif;
- char *m = (char *)&id[ATA_ID_PROD];
- unsigned long flags;
- int bswap = 1;
-
- /* local CPU only; some systems need this */
- local_irq_save(flags);
- /* read 512 bytes of id info */
- hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
- local_irq_restore(flags);
-
- drive->dev_flags |= IDE_DFLAG_ID_READ;
-#ifdef DEBUG
- printk(KERN_INFO "%s: dumping identify data\n", drive->name);
- ide_dump_identify((u8 *)id);
-#endif
- ide_fix_driveid(id);
-
- /*
- * ATA_CMD_ID_ATA returns little-endian info,
- * ATA_CMD_ID_ATAPI *usually* returns little-endian info.
- */
- if (cmd == ATA_CMD_ID_ATAPI) {
- if ((m[0] == 'N' && m[1] == 'E') || /* NEC */
- (m[0] == 'F' && m[1] == 'X') || /* Mitsumi */
- (m[0] == 'P' && m[1] == 'i')) /* Pioneer */
- /* Vertos drives may still be weird */
- bswap ^= 1;
- }
-
- ide_fixstring(m, ATA_ID_PROD_LEN, bswap);
- ide_fixstring((char *)&id[ATA_ID_FW_REV], ATA_ID_FW_REV_LEN, bswap);
- ide_fixstring((char *)&id[ATA_ID_SERNO], ATA_ID_SERNO_LEN, bswap);
-
- /* we depend on this a lot! */
- m[ATA_ID_PROD_LEN - 1] = '\0';
-
- if (strstr(m, "E X A B Y T E N E S T"))
- drive->dev_flags &= ~IDE_DFLAG_PRESENT;
- else
- drive->dev_flags |= IDE_DFLAG_PRESENT;
-}
-
-/**
- * ide_dev_read_id - send ATA/ATAPI IDENTIFY command
- * @drive: drive to identify
- * @cmd: command to use
- * @id: buffer for IDENTIFY data
- * @irq_ctx: flag set when called from the IRQ context
- *
- * Sends an ATA(PI) IDENTIFY request to a drive and waits for a response.
- *
- * Returns: 0 device was identified
- * 1 device timed-out (no response to identify request)
- * 2 device aborted the command (refused to identify itself)
- */
-
-int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id, int irq_ctx)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- int use_altstatus = 0, rc;
- unsigned long timeout;
- u8 s = 0, a = 0;
-
- /*
- * Disable device IRQ. Otherwise we'll get spurious interrupts
- * during the identify phase that the IRQ handler isn't expecting.
- */
- if (io_ports->ctl_addr)
- tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS);
-
- /* take a deep breath */
- if (irq_ctx)
- mdelay(50);
- else
- msleep(50);
-
- if (io_ports->ctl_addr &&
- (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
- a = tp_ops->read_altstatus(hwif);
- s = tp_ops->read_status(hwif);
- if ((a ^ s) & ~ATA_SENSE)
- /* ancient Seagate drives, broken interfaces */
- printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
- "instead of ALTSTATUS(0x%02x)\n",
- drive->name, s, a);
- else
- /* use non-intrusive polling */
- use_altstatus = 1;
- }
-
- /* set features register for atapi
- * identify command to be sure of reply
- */
- if (cmd == ATA_CMD_ID_ATAPI) {
- struct ide_taskfile tf;
-
- memset(&tf, 0, sizeof(tf));
- /* disable DMA & overlap */
- tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE);
- }
-
- /* ask drive for ID */
- tp_ops->exec_command(hwif, cmd);
-
- timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
-
- /* wait for IRQ and ATA_DRQ */
- if (irq_ctx) {
- rc = __ide_wait_stat(drive, ATA_DRQ, BAD_R_STAT, timeout, &s);
- if (rc)
- return 1;
- } else {
- rc = ide_busy_sleep(drive, timeout, use_altstatus);
- if (rc)
- return 1;
-
- msleep(50);
- s = tp_ops->read_status(hwif);
- }
-
- if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
- /* drive returned ID */
- do_identify(drive, cmd, id);
- /* drive responded with ID */
- rc = 0;
- /* clear drive IRQ */
- (void)tp_ops->read_status(hwif);
- } else {
- /* drive refused ID */
- rc = 2;
- }
- return rc;
-}
-
-int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 stat;
-
- timeout += jiffies;
-
- do {
- msleep(50); /* give drive a breather */
- stat = altstatus ? hwif->tp_ops->read_altstatus(hwif)
- : hwif->tp_ops->read_status(hwif);
- if ((stat & ATA_BUSY) == 0)
- return 0;
- } while (time_before(jiffies, timeout));
-
- printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__);
-
- return 1; /* drive timed-out */
-}
-
-static u8 ide_read_device(ide_drive_t *drive)
-{
- struct ide_taskfile tf;
-
- drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_DEVICE);
-
- return tf.device;
-}
-
-/**
- * do_probe - probe an IDE device
- * @drive: drive to probe
- * @cmd: command to use
- *
- * do_probe() has the difficult job of finding a drive if it exists,
- * without getting hung up if it doesn't exist, without trampling on
- * ethernet cards, and without leaving any IRQs dangling to haunt us later.
- *
- * If a drive is "known" to exist (from CMOS or kernel parameters),
- * but does not respond right away, the probe will "hang in there"
- * for the maximum wait time (about 30 seconds), otherwise it will
- * exit much more quickly.
- *
- * Returns: 0 device was identified
- * 1 device timed-out (no response to identify request)
- * 2 device aborted the command (refused to identify itself)
- * 3 bad status from device (possible for ATAPI drives)
- * 4 probe was not attempted because failure was obvious
- */
-
-static int do_probe (ide_drive_t *drive, u8 cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- u16 *id = drive->id;
- int rc;
- u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat;
-
- /* avoid waiting for inappropriate probes */
- if (present && drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
- return 4;
-
-#ifdef DEBUG
- printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
- drive->name, present, drive->media,
- (cmd == ATA_CMD_ID_ATA) ? "ATA" : "ATAPI");
-#endif
-
- /* needed for some systems
- * (e.g. crw9624 as drive0 with disk as slave)
- */
- msleep(50);
- tp_ops->dev_select(drive);
- msleep(50);
-
- if (ide_read_device(drive) != drive->select && present == 0) {
- if (drive->dn & 1) {
- /* exit with drive0 selected */
- tp_ops->dev_select(hwif->devices[0]);
- /* allow ATA_BUSY to assert & clear */
- msleep(50);
- }
- /* no i/f present: mmm.. this should be a 4 -ml */
- return 3;
- }
-
- stat = tp_ops->read_status(hwif);
-
- if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
- present || cmd == ATA_CMD_ID_ATAPI) {
- rc = ide_dev_read_id(drive, cmd, id, 0);
- if (rc)
- /* failed: try again */
- rc = ide_dev_read_id(drive, cmd, id, 0);
-
- stat = tp_ops->read_status(hwif);
-
- if (stat == (ATA_BUSY | ATA_DRDY))
- return 4;
-
- if (rc == 1 && cmd == ATA_CMD_ID_ATAPI) {
- printk(KERN_ERR "%s: no response (status = 0x%02x), "
- "resetting drive\n", drive->name, stat);
- msleep(50);
- tp_ops->dev_select(drive);
- msleep(50);
- tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
- (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0);
- rc = ide_dev_read_id(drive, cmd, id, 0);
- }
-
- /* ensure drive IRQ is clear */
- stat = tp_ops->read_status(hwif);
-
- if (rc == 1)
- printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
- drive->name, stat);
- } else {
- /* not present or maybe ATAPI */
- rc = 3;
- }
- if (drive->dn & 1) {
- /* exit with drive0 selected */
- tp_ops->dev_select(hwif->devices[0]);
- msleep(50);
- /* ensure drive irq is clear */
- (void)tp_ops->read_status(hwif);
- }
- return rc;
-}
-
-/**
- * probe_for_drives - upper level drive probe
- * @drive: drive to probe for
- *
- * probe_for_drive() tests for existence of a given drive using do_probe()
- * and presents things to the user as needed.
- *
- * Returns: 0 no device was found
- * 1 device was found
- * (note: IDE_DFLAG_PRESENT might still be not set)
- */
-
-static u8 probe_for_drive(ide_drive_t *drive)
-{
- char *m;
- int rc;
- u8 cmd;
-
- drive->dev_flags &= ~IDE_DFLAG_ID_READ;
-
- m = (char *)&drive->id[ATA_ID_PROD];
- strcpy(m, "UNKNOWN");
-
- /* skip probing? */
- if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) {
- /* if !(success||timed-out) */
- cmd = ATA_CMD_ID_ATA;
- rc = do_probe(drive, cmd);
- if (rc >= 2) {
- /* look for ATAPI device */
- cmd = ATA_CMD_ID_ATAPI;
- rc = do_probe(drive, cmd);
- }
-
- if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- return 0;
-
- /* identification failed? */
- if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
- if (drive->media == ide_disk) {
- printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n",
- drive->name, drive->cyl,
- drive->head, drive->sect);
- } else if (drive->media == ide_cdrom) {
- printk(KERN_INFO "%s: ATAPI cdrom (?)\n", drive->name);
- } else {
- /* nuke it */
- printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name);
- drive->dev_flags &= ~IDE_DFLAG_PRESENT;
- }
- } else {
- if (cmd == ATA_CMD_ID_ATAPI)
- ide_classify_atapi_dev(drive);
- else
- ide_classify_ata_dev(drive);
- }
- }
-
- if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- return 0;
-
- /* The drive wasn't being helpful. Add generic info only */
- if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
- generic_id(drive);
- return 1;
- }
-
- if (drive->media == ide_disk) {
- ide_disk_init_chs(drive);
- ide_disk_init_mult_count(drive);
- }
-
- return 1;
-}
-
-static void hwif_release_dev(struct device *dev)
-{
- ide_hwif_t *hwif = container_of(dev, ide_hwif_t, gendev);
-
- complete(&hwif->gendev_rel_comp);
-}
-
-static int ide_register_port(ide_hwif_t *hwif)
-{
- int ret;
-
- /* register with global device tree */
- dev_set_name(&hwif->gendev, "%s", hwif->name);
- dev_set_drvdata(&hwif->gendev, hwif);
- if (hwif->gendev.parent == NULL)
- hwif->gendev.parent = hwif->dev;
- hwif->gendev.release = hwif_release_dev;
-
- ret = device_register(&hwif->gendev);
- if (ret < 0) {
- printk(KERN_WARNING "IDE: %s: device_register error: %d\n",
- __func__, ret);
- goto out;
- }
-
- hwif->portdev = device_create(ide_port_class, &hwif->gendev,
- MKDEV(0, 0), hwif, "%s", hwif->name);
- if (IS_ERR(hwif->portdev)) {
- ret = PTR_ERR(hwif->portdev);
- device_unregister(&hwif->gendev);
- }
-out:
- return ret;
-}
-
-/**
- * ide_port_wait_ready - wait for port to become ready
- * @hwif: IDE port
- *
- * This is needed on some PPCs and a bunch of BIOS-less embedded
- * platforms. Typical cases are:
- *
- * - The firmware hard reset the disk before booting the kernel,
- * the drive is still doing it's poweron-reset sequence, that
- * can take up to 30 seconds.
- *
- * - The firmware does nothing (or no firmware), the device is
- * still in POST state (same as above actually).
- *
- * - Some CD/DVD/Writer combo drives tend to drive the bus during
- * their reset sequence even when they are non-selected slave
- * devices, thus preventing discovery of the main HD.
- *
- * Doing this wait-for-non-busy should not harm any existing
- * configuration and fix some issues like the above.
- *
- * BenH.
- *
- * Returns 0 on success, error code (< 0) otherwise.
- */
-
-static int ide_port_wait_ready(ide_hwif_t *hwif)
-{
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- ide_drive_t *drive;
- int i, rc;
-
- printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name);
-
- /* Let HW settle down a bit from whatever init state we
- * come from */
- mdelay(2);
-
- /* Wait for BSY bit to go away, spec timeout is 30 seconds,
- * I know of at least one disk who takes 31 seconds, I use 35
- * here to be safe
- */
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- return rc;
-
- /* Now make sure both master & slave are ready */
- ide_port_for_each_dev(i, drive, hwif) {
- /* Ignore disks that we will not probe for later. */
- if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0 ||
- (drive->dev_flags & IDE_DFLAG_PRESENT)) {
- tp_ops->dev_select(drive);
- tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
- mdelay(2);
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- goto out;
- } else
- printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n",
- drive->name);
- }
-out:
- /* Exit function with master reselected (let's be sane) */
- if (i)
- tp_ops->dev_select(hwif->devices[0]);
-
- return rc;
-}
-
-/**
- * ide_undecoded_slave - look for bad CF adapters
- * @dev1: slave device
- *
- * Analyse the drives on the interface and attempt to decide if we
- * have the same drive viewed twice. This occurs with crap CF adapters
- * and PCMCIA sometimes.
- */
-
-void ide_undecoded_slave(ide_drive_t *dev1)
-{
- ide_drive_t *dev0 = dev1->hwif->devices[0];
-
- if ((dev1->dn & 1) == 0 || (dev0->dev_flags & IDE_DFLAG_PRESENT) == 0)
- return;
-
- /* If the models don't match they are not the same product */
- if (strcmp((char *)&dev0->id[ATA_ID_PROD],
- (char *)&dev1->id[ATA_ID_PROD]))
- return;
-
- /* Serial numbers do not match */
- if (strncmp((char *)&dev0->id[ATA_ID_SERNO],
- (char *)&dev1->id[ATA_ID_SERNO], ATA_ID_SERNO_LEN))
- return;
-
- /* No serial number, thankfully very rare for CF */
- if (*(char *)&dev0->id[ATA_ID_SERNO] == 0)
- return;
-
- /* Appears to be an IDE flash adapter with decode bugs */
- printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n");
-
- dev1->dev_flags &= ~IDE_DFLAG_PRESENT;
-}
-
-EXPORT_SYMBOL_GPL(ide_undecoded_slave);
-
-static int ide_probe_port(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- unsigned int irqd;
- int i, rc = -ENODEV;
-
- BUG_ON(hwif->present);
-
- if ((hwif->devices[0]->dev_flags & IDE_DFLAG_NOPROBE) &&
- (hwif->devices[1]->dev_flags & IDE_DFLAG_NOPROBE))
- return -EACCES;
-
- /*
- * We must always disable IRQ, as probe_for_drive will assert IRQ, but
- * we'll install our IRQ driver much later...
- */
- irqd = hwif->irq;
- if (irqd)
- disable_irq(hwif->irq);
-
- if (ide_port_wait_ready(hwif) == -EBUSY)
- printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
-
- /*
- * Second drive should only exist if first drive was found,
- * but a lot of cdrom drives are configured as single slaves.
- */
- ide_port_for_each_dev(i, drive, hwif) {
- (void) probe_for_drive(drive);
- if (drive->dev_flags & IDE_DFLAG_PRESENT)
- rc = 0;
- }
-
- /*
- * Use cached IRQ number. It might be (and is...) changed by probe
- * code above
- */
- if (irqd)
- enable_irq(irqd);
-
- return rc;
-}
-
-static void ide_port_tune_devices(ide_hwif_t *hwif)
-{
- const struct ide_port_ops *port_ops = hwif->port_ops;
- ide_drive_t *drive;
- int i;
-
- ide_port_for_each_present_dev(i, drive, hwif) {
- ide_check_nien_quirk_list(drive);
-
- if (port_ops && port_ops->quirkproc)
- port_ops->quirkproc(drive);
- }
-
- ide_port_for_each_present_dev(i, drive, hwif) {
- ide_set_max_pio(drive);
-
- drive->dev_flags |= IDE_DFLAG_NICE1;
-
- if (hwif->dma_ops)
- ide_set_dma(drive);
- }
-}
-
-static void ide_initialize_rq(struct request *rq)
-{
- struct ide_request *req = blk_mq_rq_to_pdu(rq);
-
- req->special = NULL;
- scsi_req_init(&req->sreq);
- req->sreq.sense = req->sense;
-}
-
-static const struct blk_mq_ops ide_mq_ops = {
- .queue_rq = ide_queue_rq,
- .initialize_rq_fn = ide_initialize_rq,
-};
-
-/*
- * init request queue
- */
-static int ide_init_queue(ide_drive_t *drive)
-{
- struct request_queue *q;
- ide_hwif_t *hwif = drive->hwif;
- int max_sectors = 256;
- int max_sg_entries = PRD_ENTRIES;
- struct blk_mq_tag_set *set;
-
- /*
- * Our default set up assumes the normal IDE case,
- * that is 64K segmenting, standard PRD setup
- * and LBA28. Some drivers then impose their own
- * limits and LBA48 we could raise it but as yet
- * do not.
- */
-
- set = &drive->tag_set;
- set->ops = &ide_mq_ops;
- set->nr_hw_queues = 1;
- set->queue_depth = 32;
- set->reserved_tags = 1;
- set->cmd_size = sizeof(struct ide_request);
- set->numa_node = hwif_to_node(hwif);
- set->flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING;
- if (blk_mq_alloc_tag_set(set))
- return 1;
-
- q = blk_mq_init_queue(set);
- if (IS_ERR(q)) {
- blk_mq_free_tag_set(set);
- return 1;
- }
-
- blk_queue_flag_set(QUEUE_FLAG_SCSI_PASSTHROUGH, q);
-
- q->queuedata = drive;
- blk_queue_segment_boundary(q, 0xffff);
-
- if (hwif->rqsize < max_sectors)
- max_sectors = hwif->rqsize;
- blk_queue_max_hw_sectors(q, max_sectors);
-
-#ifdef CONFIG_PCI
- /* When we have an IOMMU, we may have a problem where pci_map_sg()
- * creates segments that don't completely match our boundary
- * requirements and thus need to be broken up again. Because it
- * doesn't align properly either, we may actually have to break up
- * to more segments than what was we got in the first place, a max
- * worst case is twice as many.
- * This will be fixed once we teach pci_map_sg() about our boundary
- * requirements, hopefully soon. *FIXME*
- */
- max_sg_entries >>= 1;
-#endif /* CONFIG_PCI */
-
- blk_queue_max_segments(q, max_sg_entries);
-
- /* assign drive queue */
- drive->queue = q;
-
- return 0;
-}
-
-static DEFINE_MUTEX(ide_cfg_mtx);
-
-/*
- * For any present drive:
- * - allocate the block device queue
- */
-static int ide_port_setup_devices(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- int i, j = 0;
-
- mutex_lock(&ide_cfg_mtx);
- ide_port_for_each_present_dev(i, drive, hwif) {
- if (ide_init_queue(drive)) {
- printk(KERN_ERR "ide: failed to init %s\n",
- drive->name);
- drive->dev_flags &= ~IDE_DFLAG_PRESENT;
- continue;
- }
-
- j++;
- }
- mutex_unlock(&ide_cfg_mtx);
-
- return j;
-}
-
-static void ide_host_enable_irqs(struct ide_host *host)
-{
- ide_hwif_t *hwif;
- int i;
-
- ide_host_for_each_port(i, hwif, host) {
- if (hwif == NULL)
- continue;
-
- /* clear any pending IRQs */
- hwif->tp_ops->read_status(hwif);
-
- /* unmask IRQs */
- if (hwif->io_ports.ctl_addr)
- hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
- }
-}
-
-/*
- * This routine sets up the IRQ for an IDE interface.
- */
-static int init_irq (ide_hwif_t *hwif)
-{
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_host *host = hwif->host;
- irq_handler_t irq_handler = host->irq_handler;
- int sa = host->irq_flags;
-
- if (irq_handler == NULL)
- irq_handler = ide_intr;
-
- if (!host->get_lock)
- if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
- goto out_up;
-
-#if !defined(__mc68000__)
- printk(KERN_INFO "%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
- io_ports->data_addr, io_ports->status_addr,
- io_ports->ctl_addr, hwif->irq);
-#else
- printk(KERN_INFO "%s at 0x%08lx on irq %d", hwif->name,
- io_ports->data_addr, hwif->irq);
-#endif /* __mc68000__ */
- if (hwif->host->host_flags & IDE_HFLAG_SERIALIZE)
- printk(KERN_CONT " (serialized)");
- printk(KERN_CONT "\n");
-
- return 0;
-out_up:
- return 1;
-}
-
-static void ata_probe(dev_t dev)
-{
- request_module("ide-disk");
- request_module("ide-cd");
- request_module("ide-tape");
- request_module("ide-floppy");
-}
-
-void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned int unit = drive->dn & 1;
-
- disk->major = hwif->major;
- disk->first_minor = unit << PARTN_BITS;
- sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
- disk->queue = drive->queue;
-}
-
-EXPORT_SYMBOL_GPL(ide_init_disk);
-
-static void drive_release_dev (struct device *dev)
-{
- ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
-
- ide_proc_unregister_device(drive);
-
- if (drive->sense_rq)
- blk_mq_free_request(drive->sense_rq);
-
- blk_cleanup_queue(drive->queue);
- drive->queue = NULL;
- blk_mq_free_tag_set(&drive->tag_set);
-
- drive->dev_flags &= ~IDE_DFLAG_PRESENT;
-
- complete(&drive->gendev_rel_comp);
-}
-
-static int hwif_init(ide_hwif_t *hwif)
-{
- if (!hwif->irq) {
- printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name);
- return 0;
- }
-
- if (__register_blkdev(hwif->major, hwif->name, ata_probe))
- return 0;
-
- if (!hwif->sg_max_nents)
- hwif->sg_max_nents = PRD_ENTRIES;
-
- hwif->sg_table = kmalloc_array(hwif->sg_max_nents,
- sizeof(struct scatterlist),
- GFP_KERNEL);
- if (!hwif->sg_table) {
- printk(KERN_ERR "%s: unable to allocate SG table.\n", hwif->name);
- goto out;
- }
-
- sg_init_table(hwif->sg_table, hwif->sg_max_nents);
-
- if (init_irq(hwif)) {
- printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n",
- hwif->name, hwif->irq);
- goto out;
- }
-
- return 1;
-
-out:
- unregister_blkdev(hwif->major, hwif->name);
- return 0;
-}
-
-static void hwif_register_devices(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- unsigned int i;
-
- ide_port_for_each_present_dev(i, drive, hwif) {
- struct device *dev = &drive->gendev;
- int ret;
-
- dev_set_name(dev, "%u.%u", hwif->index, i);
- dev_set_drvdata(dev, drive);
- dev->parent = &hwif->gendev;
- dev->bus = &ide_bus_type;
- dev->release = drive_release_dev;
-
- ret = device_register(dev);
- if (ret < 0)
- printk(KERN_WARNING "IDE: %s: device_register error: "
- "%d\n", __func__, ret);
- }
-}
-
-static void ide_port_init_devices(ide_hwif_t *hwif)
-{
- const struct ide_port_ops *port_ops = hwif->port_ops;
- ide_drive_t *drive;
- int i;
-
- ide_port_for_each_dev(i, drive, hwif) {
- drive->dn = i + hwif->channel * 2;
-
- if (hwif->host_flags & IDE_HFLAG_IO_32BIT)
- drive->io_32bit = 1;
- if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
- drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
- if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS)
- drive->dev_flags |= IDE_DFLAG_UNMASK;
- if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
- drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
-
- drive->pio_mode = XFER_PIO_0;
-
- if (port_ops && port_ops->init_dev)
- port_ops->init_dev(drive);
- }
-}
-
-static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
- const struct ide_port_info *d)
-{
- hwif->channel = port;
-
- hwif->chipset = d->chipset ? d->chipset : ide_pci;
-
- if (d->init_iops)
- d->init_iops(hwif);
-
- /* ->host_flags may be set by ->init_iops (or even earlier...) */
- hwif->host_flags |= d->host_flags;
- hwif->pio_mask = d->pio_mask;
-
- if (d->tp_ops)
- hwif->tp_ops = d->tp_ops;
-
- /* ->set_pio_mode for DTC2278 is currently limited to port 0 */
- if ((hwif->host_flags & IDE_HFLAG_DTC2278) == 0 || hwif->channel == 0)
- hwif->port_ops = d->port_ops;
-
- hwif->swdma_mask = d->swdma_mask;
- hwif->mwdma_mask = d->mwdma_mask;
- hwif->ultra_mask = d->udma_mask;
-
- if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
- int rc;
-
- hwif->dma_ops = d->dma_ops;
-
- if (d->init_dma)
- rc = d->init_dma(hwif, d);
- else
- rc = ide_hwif_setup_dma(hwif, d);
-
- if (rc < 0) {
- printk(KERN_INFO "%s: DMA disabled\n", hwif->name);
-
- hwif->dma_ops = NULL;
- hwif->dma_base = 0;
- hwif->swdma_mask = 0;
- hwif->mwdma_mask = 0;
- hwif->ultra_mask = 0;
- }
- }
-
- if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
- ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base))
- hwif->host->host_flags |= IDE_HFLAG_SERIALIZE;
-
- if (d->max_sectors)
- hwif->rqsize = d->max_sectors;
- else {
- if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
- (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
- hwif->rqsize = 256;
- else
- hwif->rqsize = 65536;
- }
-
- /* call chipset specific routine for each enabled port */
- if (d->init_hwif)
- d->init_hwif(hwif);
-}
-
-static void ide_port_cable_detect(ide_hwif_t *hwif)
-{
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (port_ops && port_ops->cable_detect && (hwif->ultra_mask & 0x78)) {
- if (hwif->cbl != ATA_CBL_PATA40_SHORT)
- hwif->cbl = port_ops->cable_detect(hwif);
- }
-}
-
-/*
- * Deferred request list insertion handler
- */
-static void drive_rq_insert_work(struct work_struct *work)
-{
- ide_drive_t *drive = container_of(work, ide_drive_t, rq_work);
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq;
- blk_status_t ret;
- LIST_HEAD(list);
-
- blk_mq_quiesce_queue(drive->queue);
-
- ret = BLK_STS_OK;
- spin_lock_irq(&hwif->lock);
- while (!list_empty(&drive->rq_list)) {
- rq = list_first_entry(&drive->rq_list, struct request, queuelist);
- list_del_init(&rq->queuelist);
-
- spin_unlock_irq(&hwif->lock);
- ret = ide_issue_rq(drive, rq, true);
- spin_lock_irq(&hwif->lock);
- }
- spin_unlock_irq(&hwif->lock);
-
- blk_mq_unquiesce_queue(drive->queue);
-
- if (ret != BLK_STS_OK)
- kblockd_schedule_work(&drive->rq_work);
-}
-
-static const u8 ide_hwif_to_major[] =
- { IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR, IDE4_MAJOR,
- IDE5_MAJOR, IDE6_MAJOR, IDE7_MAJOR, IDE8_MAJOR, IDE9_MAJOR };
-
-static void ide_port_init_devices_data(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- int i;
-
- ide_port_for_each_dev(i, drive, hwif) {
- u8 j = (hwif->index * MAX_DRIVES) + i;
- u16 *saved_id = drive->id;
-
- memset(drive, 0, sizeof(*drive));
- memset(saved_id, 0, SECTOR_SIZE);
- drive->id = saved_id;
-
- drive->media = ide_disk;
- drive->select = (i << 4) | ATA_DEVICE_OBS;
- drive->hwif = hwif;
- drive->ready_stat = ATA_DRDY;
- drive->bad_wstat = BAD_W_STAT;
- drive->special_flags = IDE_SFLAG_RECALIBRATE |
- IDE_SFLAG_SET_GEOMETRY;
- drive->name[0] = 'h';
- drive->name[1] = 'd';
- drive->name[2] = 'a' + j;
- drive->max_failures = IDE_DEFAULT_MAX_FAILURES;
-
- INIT_LIST_HEAD(&drive->list);
- init_completion(&drive->gendev_rel_comp);
-
- INIT_WORK(&drive->rq_work, drive_rq_insert_work);
- INIT_LIST_HEAD(&drive->rq_list);
- }
-}
-
-static void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
-{
- /* fill in any non-zero initial values */
- hwif->index = index;
- hwif->major = ide_hwif_to_major[index];
-
- hwif->name[0] = 'i';
- hwif->name[1] = 'd';
- hwif->name[2] = 'e';
- hwif->name[3] = '0' + index;
-
- spin_lock_init(&hwif->lock);
-
- timer_setup(&hwif->timer, ide_timer_expiry, 0);
-
- init_completion(&hwif->gendev_rel_comp);
-
- hwif->tp_ops = &default_tp_ops;
-
- ide_port_init_devices_data(hwif);
-}
-
-static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw)
-{
- memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
- hwif->irq = hw->irq;
- hwif->dev = hw->dev;
- hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
- hwif->config_data = hw->config;
-}
-
-static unsigned int ide_indexes;
-
-/**
- * ide_find_port_slot - find free port slot
- * @d: IDE port info
- *
- * Return the new port slot index or -ENOENT if we are out of free slots.
- */
-
-static int ide_find_port_slot(const struct ide_port_info *d)
-{
- int idx = -ENOENT;
- u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1;
- u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;
-
- /*
- * Claim an unassigned slot.
- *
- * Give preference to claiming other slots before claiming ide0/ide1,
- * just in case there's another interface yet-to-be-scanned
- * which uses ports 0x1f0/0x170 (the ide0/ide1 defaults).
- *
- * Unless there is a bootable card that does not use the standard
- * ports 0x1f0/0x170 (the ide0/ide1 defaults).
- */
- mutex_lock(&ide_cfg_mtx);
- if (bootable) {
- if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | i);
- } else {
- if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | 3);
- else if ((ide_indexes & 3) != 3)
- idx = ffz(ide_indexes);
- }
- if (idx >= 0)
- ide_indexes |= (1 << idx);
- mutex_unlock(&ide_cfg_mtx);
-
- return idx;
-}
-
-static void ide_free_port_slot(int idx)
-{
- mutex_lock(&ide_cfg_mtx);
- ide_indexes &= ~(1 << idx);
- mutex_unlock(&ide_cfg_mtx);
-}
-
-static void ide_port_free_devices(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- int i;
-
- ide_port_for_each_dev(i, drive, hwif) {
- kfree(drive->id);
- kfree(drive);
- }
-}
-
-static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
-{
- ide_drive_t *drive;
- int i;
-
- for (i = 0; i < MAX_DRIVES; i++) {
- drive = kzalloc_node(sizeof(*drive), GFP_KERNEL, node);
- if (drive == NULL)
- goto out_nomem;
-
- /*
- * In order to keep things simple we have an id
- * block for all drives at all times. If the device
- * is pre ATA or refuses ATA/ATAPI identify we
- * will add faked data to this.
- *
- * Also note that 0 everywhere means "can't do X"
- */
- drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
- if (drive->id == NULL)
- goto out_free_drive;
-
- hwif->devices[i] = drive;
- }
- return 0;
-
-out_free_drive:
- kfree(drive);
-out_nomem:
- ide_port_free_devices(hwif);
- return -ENOMEM;
-}
-
-struct ide_host *ide_host_alloc(const struct ide_port_info *d,
- struct ide_hw **hws, unsigned int n_ports)
-{
- struct ide_host *host;
- struct device *dev = hws[0] ? hws[0]->dev : NULL;
- int node = dev ? dev_to_node(dev) : -1;
- int i;
-
- host = kzalloc_node(sizeof(*host), GFP_KERNEL, node);
- if (host == NULL)
- return NULL;
-
- for (i = 0; i < n_ports; i++) {
- ide_hwif_t *hwif;
- int idx;
-
- if (hws[i] == NULL)
- continue;
-
- hwif = kzalloc_node(sizeof(*hwif), GFP_KERNEL, node);
- if (hwif == NULL)
- continue;
-
- if (ide_port_alloc_devices(hwif, node) < 0) {
- kfree(hwif);
- continue;
- }
-
- idx = ide_find_port_slot(d);
- if (idx < 0) {
- printk(KERN_ERR "%s: no free slot for interface\n",
- d ? d->name : "ide");
- ide_port_free_devices(hwif);
- kfree(hwif);
- continue;
- }
-
- ide_init_port_data(hwif, idx);
-
- hwif->host = host;
-
- host->ports[i] = hwif;
- host->n_ports++;
- }
-
- if (host->n_ports == 0) {
- kfree(host);
- return NULL;
- }
-
- host->dev[0] = dev;
-
- if (d) {
- host->init_chipset = d->init_chipset;
- host->get_lock = d->get_lock;
- host->release_lock = d->release_lock;
- host->host_flags = d->host_flags;
- host->irq_flags = d->irq_flags;
- }
-
- return host;
-}
-EXPORT_SYMBOL_GPL(ide_host_alloc);
-
-static void ide_port_free(ide_hwif_t *hwif)
-{
- ide_port_free_devices(hwif);
- ide_free_port_slot(hwif->index);
- kfree(hwif);
-}
-
-static void ide_disable_port(ide_hwif_t *hwif)
-{
- struct ide_host *host = hwif->host;
- int i;
-
- printk(KERN_INFO "%s: disabling port\n", hwif->name);
-
- for (i = 0; i < MAX_HOST_PORTS; i++) {
- if (host->ports[i] == hwif) {
- host->ports[i] = NULL;
- host->n_ports--;
- }
- }
-
- ide_port_free(hwif);
-}
-
-int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
- struct ide_hw **hws)
-{
- ide_hwif_t *hwif, *mate = NULL;
- int i, j = 0;
-
- pr_warn("legacy IDE will be removed in 2021, please switch to libata\n"
- "Report any missing HW support to linux-ide@...r.kernel.org\n");
-
- ide_host_for_each_port(i, hwif, host) {
- if (hwif == NULL) {
- mate = NULL;
- continue;
- }
-
- ide_init_port_hw(hwif, hws[i]);
- ide_port_apply_params(hwif);
-
- if ((i & 1) && mate) {
- hwif->mate = mate;
- mate->mate = hwif;
- }
-
- mate = (i & 1) ? NULL : hwif;
-
- ide_init_port(hwif, i & 1, d);
- ide_port_cable_detect(hwif);
-
- hwif->port_flags |= IDE_PFLAG_PROBING;
-
- ide_port_init_devices(hwif);
- }
-
- ide_host_for_each_port(i, hwif, host) {
- if (hwif == NULL)
- continue;
-
- if (ide_probe_port(hwif) == 0)
- hwif->present = 1;
-
- hwif->port_flags &= ~IDE_PFLAG_PROBING;
-
- if ((hwif->host_flags & IDE_HFLAG_4DRIVES) == 0 ||
- hwif->mate == NULL || hwif->mate->present == 0) {
- if (ide_register_port(hwif)) {
- ide_disable_port(hwif);
- continue;
- }
- }
-
- if (hwif->present)
- ide_port_tune_devices(hwif);
- }
-
- ide_host_enable_irqs(host);
-
- ide_host_for_each_port(i, hwif, host) {
- if (hwif == NULL)
- continue;
-
- if (hwif_init(hwif) == 0) {
- printk(KERN_INFO "%s: failed to initialize IDE "
- "interface\n", hwif->name);
- device_unregister(hwif->portdev);
- device_unregister(&hwif->gendev);
- ide_disable_port(hwif);
- continue;
- }
-
- if (hwif->present)
- if (ide_port_setup_devices(hwif) == 0) {
- hwif->present = 0;
- continue;
- }
-
- j++;
-
- ide_acpi_init_port(hwif);
-
- if (hwif->present)
- ide_acpi_port_init_devices(hwif);
- }
-
- ide_host_for_each_port(i, hwif, host) {
- if (hwif == NULL)
- continue;
-
- ide_sysfs_register_port(hwif);
- ide_proc_register_port(hwif);
-
- if (hwif->present) {
- ide_proc_port_register_devices(hwif);
- hwif_register_devices(hwif);
- }
- }
-
- return j ? 0 : -1;
-}
-EXPORT_SYMBOL_GPL(ide_host_register);
-
-int ide_host_add(const struct ide_port_info *d, struct ide_hw **hws,
- unsigned int n_ports, struct ide_host **hostp)
-{
- struct ide_host *host;
- int rc;
-
- host = ide_host_alloc(d, hws, n_ports);
- if (host == NULL)
- return -ENOMEM;
-
- rc = ide_host_register(host, d, hws);
- if (rc) {
- ide_host_free(host);
- return rc;
- }
-
- if (hostp)
- *hostp = host;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_host_add);
-
-static void __ide_port_unregister_devices(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- int i;
-
- ide_port_for_each_present_dev(i, drive, hwif) {
- device_unregister(&drive->gendev);
- wait_for_completion(&drive->gendev_rel_comp);
- }
-}
-
-void ide_port_unregister_devices(ide_hwif_t *hwif)
-{
- mutex_lock(&ide_cfg_mtx);
- __ide_port_unregister_devices(hwif);
- hwif->present = 0;
- ide_port_init_devices_data(hwif);
- mutex_unlock(&ide_cfg_mtx);
-}
-EXPORT_SYMBOL_GPL(ide_port_unregister_devices);
-
-/**
- * ide_unregister - free an IDE interface
- * @hwif: IDE interface
- *
- * Perform the final unregister of an IDE interface.
- *
- * Locking:
- * The caller must not hold the IDE locks.
- *
- * It is up to the caller to be sure there is no pending I/O here,
- * and that the interface will not be reopened (present/vanishing
- * locking isn't yet done BTW).
- */
-
-static void ide_unregister(ide_hwif_t *hwif)
-{
- mutex_lock(&ide_cfg_mtx);
-
- if (hwif->present) {
- __ide_port_unregister_devices(hwif);
- hwif->present = 0;
- }
-
- ide_proc_unregister_port(hwif);
-
- if (!hwif->host->get_lock)
- free_irq(hwif->irq, hwif);
-
- device_unregister(hwif->portdev);
- device_unregister(&hwif->gendev);
- wait_for_completion(&hwif->gendev_rel_comp);
-
- /*
- * Remove us from the kernel's knowledge
- */
- kfree(hwif->sg_table);
- unregister_blkdev(hwif->major, hwif->name);
-
- ide_release_dma_engine(hwif);
-
- mutex_unlock(&ide_cfg_mtx);
-}
-
-void ide_host_free(struct ide_host *host)
-{
- ide_hwif_t *hwif;
- int i;
-
- ide_host_for_each_port(i, hwif, host) {
- if (hwif)
- ide_port_free(hwif);
- }
-
- kfree(host);
-}
-EXPORT_SYMBOL_GPL(ide_host_free);
-
-void ide_host_remove(struct ide_host *host)
-{
- ide_hwif_t *hwif;
- int i;
-
- ide_host_for_each_port(i, hwif, host) {
- if (hwif)
- ide_unregister(hwif);
- }
-
- ide_host_free(host);
-}
-EXPORT_SYMBOL_GPL(ide_host_remove);
-
-void ide_port_scan(ide_hwif_t *hwif)
-{
- int rc;
-
- ide_port_apply_params(hwif);
- ide_port_cable_detect(hwif);
-
- hwif->port_flags |= IDE_PFLAG_PROBING;
-
- ide_port_init_devices(hwif);
-
- rc = ide_probe_port(hwif);
-
- hwif->port_flags &= ~IDE_PFLAG_PROBING;
-
- if (rc < 0)
- return;
-
- hwif->present = 1;
-
- ide_port_tune_devices(hwif);
- ide_port_setup_devices(hwif);
- ide_acpi_port_init_devices(hwif);
- hwif_register_devices(hwif);
- ide_proc_port_register_devices(hwif);
-}
-EXPORT_SYMBOL_GPL(ide_port_scan);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
deleted file mode 100644
index 15c17f3781ee..000000000000
--- a/drivers/ide/ide-proc.c
+++ /dev/null
@@ -1,633 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1997-1998 Mark Lord
- * Copyright (C) 2003 Red Hat
- *
- * Some code was moved here from ide.c, see it for original copyrights.
- */
-
-/*
- * This is the /proc/ide/ filesystem implementation.
- *
- * Drive/Driver settings can be retrieved by reading the drive's
- * "settings" files. e.g. "cat /proc/ide0/hda/settings"
- * To write a new value "val" into a specific setting "name", use:
- * echo "name:val" >/proc/ide/ide0/hda/settings
- */
-
-#include <linux/module.h>
-
-#include <linux/uaccess.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/ctype.h>
-#include <linux/ide.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-
-static struct proc_dir_entry *proc_ide_root;
-
-static int ide_imodel_proc_show(struct seq_file *m, void *v)
-{
- ide_hwif_t *hwif = (ide_hwif_t *) m->private;
- const char *name;
-
- switch (hwif->chipset) {
- case ide_generic: name = "generic"; break;
- case ide_pci: name = "pci"; break;
- case ide_cmd640: name = "cmd640"; break;
- case ide_dtc2278: name = "dtc2278"; break;
- case ide_ali14xx: name = "ali14xx"; break;
- case ide_qd65xx: name = "qd65xx"; break;
- case ide_umc8672: name = "umc8672"; break;
- case ide_ht6560b: name = "ht6560b"; break;
- case ide_4drives: name = "4drives"; break;
- case ide_pmac: name = "mac-io"; break;
- case ide_au1xxx: name = "au1xxx"; break;
- case ide_palm3710: name = "palm3710"; break;
- case ide_acorn: name = "acorn"; break;
- default: name = "(unknown)"; break;
- }
- seq_printf(m, "%s\n", name);
- return 0;
-}
-
-static int ide_mate_proc_show(struct seq_file *m, void *v)
-{
- ide_hwif_t *hwif = (ide_hwif_t *) m->private;
-
- if (hwif && hwif->mate)
- seq_printf(m, "%s\n", hwif->mate->name);
- else
- seq_printf(m, "(none)\n");
- return 0;
-}
-
-static int ide_channel_proc_show(struct seq_file *m, void *v)
-{
- ide_hwif_t *hwif = (ide_hwif_t *) m->private;
-
- seq_printf(m, "%c\n", hwif->channel ? '1' : '0');
- return 0;
-}
-
-static int ide_identify_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t *drive = (ide_drive_t *)m->private;
- u8 *buf;
-
- if (!drive) {
- seq_putc(m, '\n');
- return 0;
- }
-
- buf = kmalloc(SECTOR_SIZE, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- if (taskfile_lib_get_identify(drive, buf) == 0) {
- __le16 *val = (__le16 *)buf;
- int i;
-
- for (i = 0; i < SECTOR_SIZE / 2; i++) {
- seq_printf(m, "%04x%c", le16_to_cpu(val[i]),
- (i % 8) == 7 ? '\n' : ' ');
- }
- } else
- seq_putc(m, buf[0]);
- kfree(buf);
- return 0;
-}
-
-/**
- * ide_find_setting - find a specific setting
- * @st: setting table pointer
- * @name: setting name
- *
- * Scan's the setting table for a matching entry and returns
- * this or NULL if no entry is found. The caller must hold the
- * setting semaphore
- */
-
-static
-const struct ide_proc_devset *ide_find_setting(const struct ide_proc_devset *st,
- char *name)
-{
- while (st->name) {
- if (strcmp(st->name, name) == 0)
- break;
- st++;
- }
- return st->name ? st : NULL;
-}
-
-/**
- * ide_read_setting - read an IDE setting
- * @drive: drive to read from
- * @setting: drive setting
- *
- * Read a drive setting and return the value. The caller
- * must hold the ide_setting_mtx when making this call.
- *
- * BUGS: the data return and error are the same return value
- * so an error -EINVAL and true return of the same value cannot
- * be told apart
- */
-
-static int ide_read_setting(ide_drive_t *drive,
- const struct ide_proc_devset *setting)
-{
- const struct ide_devset *ds = setting->setting;
- int val = -EINVAL;
-
- if (ds->get)
- val = ds->get(drive);
-
- return val;
-}
-
-/**
- * ide_write_setting - read an IDE setting
- * @drive: drive to read from
- * @setting: drive setting
- * @val: value
- *
- * Write a drive setting if it is possible. The caller
- * must hold the ide_setting_mtx when making this call.
- *
- * BUGS: the data return and error are the same return value
- * so an error -EINVAL and true return of the same value cannot
- * be told apart
- *
- * FIXME: This should be changed to enqueue a special request
- * to the driver to change settings, and then wait on a sema for completion.
- * The current scheme of polling is kludgy, though safe enough.
- */
-
-static int ide_write_setting(ide_drive_t *drive,
- const struct ide_proc_devset *setting, int val)
-{
- const struct ide_devset *ds = setting->setting;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- if (!ds->set)
- return -EPERM;
- if ((ds->flags & DS_SYNC)
- && (val < setting->min || val > setting->max))
- return -EINVAL;
- return ide_devset_execute(drive, ds, val);
-}
-
-ide_devset_get(xfer_rate, current_speed);
-
-static int set_xfer_rate (ide_drive_t *drive, int arg)
-{
- struct ide_cmd cmd;
-
- if (arg < XFER_PIO_0 || arg > XFER_UDMA_6)
- return -EINVAL;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf.command = ATA_CMD_SET_FEATURES;
- cmd.tf.feature = SETFEATURES_XFER;
- cmd.tf.nsect = (u8)arg;
- cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT;
- cmd.valid.in.tf = IDE_VALID_NSECT;
- cmd.tf_flags = IDE_TFLAG_SET_XFER;
-
- return ide_no_data_taskfile(drive, &cmd);
-}
-
-ide_devset_rw(current_speed, xfer_rate);
-ide_devset_rw_field(init_speed, init_speed);
-ide_devset_rw_flag(nice1, IDE_DFLAG_NICE1);
-ide_devset_ro_field(number, dn);
-
-static const struct ide_proc_devset ide_generic_settings[] = {
- IDE_PROC_DEVSET(current_speed, 0, 70),
- IDE_PROC_DEVSET(init_speed, 0, 70),
- IDE_PROC_DEVSET(io_32bit, 0, 1 + (SUPPORT_VLB_SYNC << 1)),
- IDE_PROC_DEVSET(keepsettings, 0, 1),
- IDE_PROC_DEVSET(nice1, 0, 1),
- IDE_PROC_DEVSET(number, 0, 3),
- IDE_PROC_DEVSET(pio_mode, 0, 255),
- IDE_PROC_DEVSET(unmaskirq, 0, 1),
- IDE_PROC_DEVSET(using_dma, 0, 1),
- { NULL },
-};
-
-static void proc_ide_settings_warn(void)
-{
- printk_once(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is "
- "obsolete, and will be removed soon!\n");
-}
-
-static int ide_settings_proc_show(struct seq_file *m, void *v)
-{
- const struct ide_proc_devset *setting, *g, *d;
- const struct ide_devset *ds;
- ide_drive_t *drive = (ide_drive_t *) m->private;
- int rc, mul_factor, div_factor;
-
- proc_ide_settings_warn();
-
- mutex_lock(&ide_setting_mtx);
- g = ide_generic_settings;
- d = drive->settings;
- seq_printf(m, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n");
- seq_printf(m, "----\t\t\t-----\t\t---\t\t---\t\t----\n");
- while (g->name || (d && d->name)) {
- /* read settings in the alphabetical order */
- if (g->name && d && d->name) {
- if (strcmp(d->name, g->name) < 0)
- setting = d++;
- else
- setting = g++;
- } else if (d && d->name) {
- setting = d++;
- } else
- setting = g++;
- mul_factor = setting->mulf ? setting->mulf(drive) : 1;
- div_factor = setting->divf ? setting->divf(drive) : 1;
- seq_printf(m, "%-24s", setting->name);
- rc = ide_read_setting(drive, setting);
- if (rc >= 0)
- seq_printf(m, "%-16d", rc * mul_factor / div_factor);
- else
- seq_printf(m, "%-16s", "write-only");
- seq_printf(m, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor);
- ds = setting->setting;
- if (ds->get)
- seq_printf(m, "r");
- if (ds->set)
- seq_printf(m, "w");
- seq_printf(m, "\n");
- }
- mutex_unlock(&ide_setting_mtx);
- return 0;
-}
-
-static int ide_settings_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ide_settings_proc_show, PDE_DATA(inode));
-}
-
-#define MAX_LEN 30
-
-static ssize_t ide_settings_proc_write(struct file *file, const char __user *buffer,
- size_t count, loff_t *pos)
-{
- ide_drive_t *drive = PDE_DATA(file_inode(file));
- char name[MAX_LEN + 1];
- int for_real = 0, mul_factor, div_factor;
- unsigned long n;
-
- const struct ide_proc_devset *setting;
- char *buf, *s;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
- proc_ide_settings_warn();
-
- if (count >= PAGE_SIZE)
- return -EINVAL;
-
- s = buf = (char *)__get_free_page(GFP_USER);
- if (!buf)
- return -ENOMEM;
-
- if (copy_from_user(buf, buffer, count)) {
- free_page((unsigned long)buf);
- return -EFAULT;
- }
-
- buf[count] = '\0';
-
- /*
- * Skip over leading whitespace
- */
- while (count && isspace(*s)) {
- --count;
- ++s;
- }
- /*
- * Do one full pass to verify all parameters,
- * then do another to actually write the new settings.
- */
- do {
- char *p = s;
- n = count;
- while (n > 0) {
- unsigned val;
- char *q = p;
-
- while (n > 0 && *p != ':') {
- --n;
- p++;
- }
- if (*p != ':')
- goto parse_error;
- if (p - q > MAX_LEN)
- goto parse_error;
- memcpy(name, q, p - q);
- name[p - q] = 0;
-
- if (n > 0) {
- --n;
- p++;
- } else
- goto parse_error;
-
- val = simple_strtoul(p, &q, 10);
- n -= q - p;
- p = q;
- if (n > 0 && !isspace(*p))
- goto parse_error;
- while (n > 0 && isspace(*p)) {
- --n;
- ++p;
- }
-
- mutex_lock(&ide_setting_mtx);
- /* generic settings first, then driver specific ones */
- setting = ide_find_setting(ide_generic_settings, name);
- if (!setting) {
- if (drive->settings)
- setting = ide_find_setting(drive->settings, name);
- if (!setting) {
- mutex_unlock(&ide_setting_mtx);
- goto parse_error;
- }
- }
- if (for_real) {
- mul_factor = setting->mulf ? setting->mulf(drive) : 1;
- div_factor = setting->divf ? setting->divf(drive) : 1;
- ide_write_setting(drive, setting, val * div_factor / mul_factor);
- }
- mutex_unlock(&ide_setting_mtx);
- }
- } while (!for_real++);
- free_page((unsigned long)buf);
- return count;
-parse_error:
- free_page((unsigned long)buf);
- printk("%s(): parse error\n", __func__);
- return -EINVAL;
-}
-
-static const struct proc_ops ide_settings_proc_ops = {
- .proc_open = ide_settings_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = ide_settings_proc_write,
-};
-
-int ide_capacity_proc_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "%llu\n", (long long)0x7fffffff);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_capacity_proc_show);
-
-int ide_geometry_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t *drive = (ide_drive_t *) m->private;
-
- seq_printf(m, "physical %d/%d/%d\n",
- drive->cyl, drive->head, drive->sect);
- seq_printf(m, "logical %d/%d/%d\n",
- drive->bios_cyl, drive->bios_head, drive->bios_sect);
- return 0;
-}
-EXPORT_SYMBOL(ide_geometry_proc_show);
-
-static int ide_dmodel_proc_show(struct seq_file *seq, void *v)
-{
- ide_drive_t *drive = (ide_drive_t *) seq->private;
- char *m = (char *)&drive->id[ATA_ID_PROD];
-
- seq_printf(seq, "%.40s\n", m[0] ? m : "(none)");
- return 0;
-}
-
-static int ide_driver_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t *drive = (ide_drive_t *)m->private;
- struct device *dev = &drive->gendev;
- struct ide_driver *ide_drv;
-
- if (dev->driver) {
- ide_drv = to_ide_driver(dev->driver);
- seq_printf(m, "%s version %s\n",
- dev->driver->name, ide_drv->version);
- } else
- seq_printf(m, "ide-default version 0.9.newide\n");
- return 0;
-}
-
-static int ide_media_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t *drive = (ide_drive_t *) m->private;
- const char *media;
-
- switch (drive->media) {
- case ide_disk: media = "disk\n"; break;
- case ide_cdrom: media = "cdrom\n"; break;
- case ide_tape: media = "tape\n"; break;
- case ide_floppy: media = "floppy\n"; break;
- case ide_optical: media = "optical\n"; break;
- default: media = "UNKNOWN\n"; break;
- }
- seq_puts(m, media);
- return 0;
-}
-
-static int ide_media_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ide_media_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations ide_media_proc_fops = {
- .owner = THIS_MODULE,
- .open = ide_media_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static ide_proc_entry_t generic_drive_entries[] = {
- { "driver", S_IFREG|S_IRUGO, ide_driver_proc_show },
- { "identify", S_IFREG|S_IRUSR, ide_identify_proc_show },
- { "media", S_IFREG|S_IRUGO, ide_media_proc_show },
- { "model", S_IFREG|S_IRUGO, ide_dmodel_proc_show },
- {}
-};
-
-static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data)
-{
- struct proc_dir_entry *ent;
-
- if (!dir || !p)
- return;
- while (p->name != NULL) {
- ent = proc_create_single_data(p->name, p->mode, dir, p->show, data);
- if (!ent) return;
- p++;
- }
-}
-
-static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p)
-{
- if (!dir || !p)
- return;
- while (p->name != NULL) {
- remove_proc_entry(p->name, dir);
- p++;
- }
-}
-
-void ide_proc_register_driver(ide_drive_t *drive, struct ide_driver *driver)
-{
- mutex_lock(&ide_setting_mtx);
- drive->settings = driver->proc_devsets(drive);
- mutex_unlock(&ide_setting_mtx);
-
- ide_add_proc_entries(drive->proc, driver->proc_entries(drive), drive);
-}
-
-EXPORT_SYMBOL(ide_proc_register_driver);
-
-/**
- * ide_proc_unregister_driver - remove driver specific data
- * @drive: drive
- * @driver: driver
- *
- * Clean up the driver specific /proc files and IDE settings
- * for a given drive.
- *
- * Takes ide_setting_mtx.
- */
-
-void ide_proc_unregister_driver(ide_drive_t *drive, struct ide_driver *driver)
-{
- ide_remove_proc_entries(drive->proc, driver->proc_entries(drive));
-
- mutex_lock(&ide_setting_mtx);
- /*
- * ide_setting_mtx protects both the settings list and the use
- * of settings (we cannot take a setting out that is being used).
- */
- drive->settings = NULL;
- mutex_unlock(&ide_setting_mtx);
-}
-EXPORT_SYMBOL(ide_proc_unregister_driver);
-
-void ide_proc_port_register_devices(ide_hwif_t *hwif)
-{
- struct proc_dir_entry *ent;
- struct proc_dir_entry *parent = hwif->proc;
- ide_drive_t *drive;
- char name[64];
- int i;
-
- ide_port_for_each_dev(i, drive, hwif) {
- if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- continue;
-
- drive->proc = proc_mkdir(drive->name, parent);
- if (drive->proc) {
- ide_add_proc_entries(drive->proc, generic_drive_entries, drive);
- proc_create_data("settings", S_IFREG|S_IRUSR|S_IWUSR,
- drive->proc, &ide_settings_proc_ops,
- drive);
- }
- sprintf(name, "ide%d/%s", (drive->name[2]-'a')/2, drive->name);
- ent = proc_symlink(drive->name, proc_ide_root, name);
- if (!ent) return;
- }
-}
-
-void ide_proc_unregister_device(ide_drive_t *drive)
-{
- if (drive->proc) {
- remove_proc_entry("settings", drive->proc);
- ide_remove_proc_entries(drive->proc, generic_drive_entries);
- remove_proc_entry(drive->name, proc_ide_root);
- remove_proc_entry(drive->name, drive->hwif->proc);
- drive->proc = NULL;
- }
-}
-
-static ide_proc_entry_t hwif_entries[] = {
- { "channel", S_IFREG|S_IRUGO, ide_channel_proc_show },
- { "mate", S_IFREG|S_IRUGO, ide_mate_proc_show },
- { "model", S_IFREG|S_IRUGO, ide_imodel_proc_show },
- {}
-};
-
-void ide_proc_register_port(ide_hwif_t *hwif)
-{
- if (!hwif->proc) {
- hwif->proc = proc_mkdir(hwif->name, proc_ide_root);
-
- if (!hwif->proc)
- return;
-
- ide_add_proc_entries(hwif->proc, hwif_entries, hwif);
- }
-}
-
-void ide_proc_unregister_port(ide_hwif_t *hwif)
-{
- if (hwif->proc) {
- ide_remove_proc_entries(hwif->proc, hwif_entries);
- remove_proc_entry(hwif->name, proc_ide_root);
- hwif->proc = NULL;
- }
-}
-
-static int proc_print_driver(struct device_driver *drv, void *data)
-{
- struct ide_driver *ide_drv = to_ide_driver(drv);
- struct seq_file *s = data;
-
- seq_printf(s, "%s version %s\n", drv->name, ide_drv->version);
-
- return 0;
-}
-
-static int ide_drivers_show(struct seq_file *s, void *p)
-{
- int err;
-
- err = bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver);
- if (err < 0)
- printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n",
- __func__, err);
- return 0;
-}
-
-DEFINE_PROC_SHOW_ATTRIBUTE(ide_drivers);
-
-void proc_ide_create(void)
-{
- proc_ide_root = proc_mkdir("ide", NULL);
-
- if (!proc_ide_root)
- return;
-
- proc_create("drivers", 0, proc_ide_root, &ide_drivers_proc_ops);
-}
-
-void proc_ide_destroy(void)
-{
- remove_proc_entry("drivers", proc_ide_root);
- remove_proc_entry("ide", NULL);
-}
diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
deleted file mode 100644
index b0411a1827a3..000000000000
--- a/drivers/ide/ide-scan-pci.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * support for probing IDE PCI devices in the PCI bus order
- *
- * Copyright (c) 1998-2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (c) 1995-1998 Mark Lord
- *
- * May be copied or modified under the terms of the GNU General Public License
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-
-/*
- * Module interfaces
- */
-
-static int pre_init = 1; /* Before first ordered IDE scan */
-static LIST_HEAD(ide_pci_drivers);
-
-/*
- * __ide_pci_register_driver - attach IDE driver
- * @driver: pci driver
- * @module: owner module of the driver
- *
- * Registers a driver with the IDE layer. The IDE layer arranges that
- * boot time setup is done in the expected device order and then
- * hands the controllers off to the core PCI code to do the rest of
- * the work.
- *
- * Returns are the same as for pci_register_driver
- */
-
-int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
- const char *mod_name)
-{
- if (!pre_init)
- return __pci_register_driver(driver, module, mod_name);
- driver->driver.owner = module;
- list_add_tail(&driver->node, &ide_pci_drivers);
- return 0;
-}
-EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
-
-/**
- * ide_scan_pcidev - find an IDE driver for a device
- * @dev: PCI device to check
- *
- * Look for an IDE driver to handle the device we are considering.
- * This is only used during boot up to get the ordering correct. After
- * boot up the pci layer takes over the job.
- */
-
-static int __init ide_scan_pcidev(struct pci_dev *dev)
-{
- struct list_head *l;
- struct pci_driver *d;
- int ret;
-
- list_for_each(l, &ide_pci_drivers) {
- d = list_entry(l, struct pci_driver, node);
- if (d->id_table) {
- const struct pci_device_id *id =
- pci_match_id(d->id_table, dev);
-
- if (id != NULL) {
- pci_assign_irq(dev);
- ret = d->probe(dev, id);
- if (ret >= 0) {
- dev->driver = d;
- pci_dev_get(dev);
- return 1;
- }
- }
- }
- }
- return 0;
-}
-
-/**
- * ide_scan_pcibus - perform the initial IDE driver scan
- *
- * Perform the initial bus rather than driver ordered scan of the
- * PCI drivers. After this all IDE pci handling becomes standard
- * module ordering not traditionally ordered.
- */
-
-static int __init ide_scan_pcibus(void)
-{
- struct pci_dev *dev = NULL;
- struct pci_driver *d, *tmp;
-
- pre_init = 0;
- for_each_pci_dev(dev)
- ide_scan_pcidev(dev);
-
- /*
- * Hand the drivers over to the PCI layer now we
- * are post init.
- */
-
- list_for_each_entry_safe(d, tmp, &ide_pci_drivers, node) {
- list_del(&d->node);
- if (__pci_register_driver(d, d->driver.owner,
- d->driver.mod_name))
- printk(KERN_ERR "%s: failed to register %s driver\n",
- __func__, d->driver.mod_name);
- }
-
- return 0;
-}
-device_initcall(ide_scan_pcibus);
diff --git a/drivers/ide/ide-sysfs.c b/drivers/ide/ide-sysfs.c
deleted file mode 100644
index c08a8a0916e2..000000000000
--- a/drivers/ide/ide-sysfs.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/ide.h>
-
-char *ide_media_string(ide_drive_t *drive)
-{
- switch (drive->media) {
- case ide_disk:
- return "disk";
- case ide_cdrom:
- return "cdrom";
- case ide_tape:
- return "tape";
- case ide_floppy:
- return "floppy";
- case ide_optical:
- return "optical";
- default:
- return "UNKNOWN";
- }
-}
-
-static ssize_t media_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", ide_media_string(drive));
-}
-static DEVICE_ATTR_RO(media);
-
-static ssize_t drivename_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", drive->name);
-}
-static DEVICE_ATTR_RO(drivename);
-
-static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "ide:m-%s\n", ide_media_string(drive));
-}
-static DEVICE_ATTR_RO(modalias);
-
-static ssize_t model_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
-}
-static DEVICE_ATTR_RO(model);
-
-static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
-}
-static DEVICE_ATTR_RO(firmware);
-
-static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
-}
-static DEVICE_ATTR(serial, 0400, serial_show, NULL);
-
-static DEVICE_ATTR(unload_heads, 0644, ide_park_show, ide_park_store);
-
-static struct attribute *ide_attrs[] = {
- &dev_attr_media.attr,
- &dev_attr_drivename.attr,
- &dev_attr_modalias.attr,
- &dev_attr_model.attr,
- &dev_attr_firmware.attr,
- &dev_attr_serial.attr,
- &dev_attr_unload_heads.attr,
- NULL,
-};
-
-static const struct attribute_group ide_attr_group = {
- .attrs = ide_attrs,
-};
-
-const struct attribute_group *ide_dev_groups[] = {
- &ide_attr_group,
- NULL,
-};
-
-static ssize_t store_delete_devices(struct device *portdev,
- struct device_attribute *attr,
- const char *buf, size_t n)
-{
- ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
- if (strncmp(buf, "1", n))
- return -EINVAL;
-
- ide_port_unregister_devices(hwif);
-
- return n;
-};
-
-static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
-
-static ssize_t store_scan(struct device *portdev,
- struct device_attribute *attr,
- const char *buf, size_t n)
-{
- ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
- if (strncmp(buf, "1", n))
- return -EINVAL;
-
- ide_port_unregister_devices(hwif);
- ide_port_scan(hwif);
-
- return n;
-};
-
-static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
-
-static struct device_attribute *ide_port_attrs[] = {
- &dev_attr_delete_devices,
- &dev_attr_scan,
- NULL
-};
-
-int ide_sysfs_register_port(ide_hwif_t *hwif)
-{
- int i, rc;
-
- for (i = 0; ide_port_attrs[i]; i++) {
- rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
- if (rc)
- break;
- }
-
- return rc;
-}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
deleted file mode 100644
index fa05e7e7d609..000000000000
--- a/drivers/ide/ide-tape.c
+++ /dev/null
@@ -1,2083 +0,0 @@
-/*
- * IDE ATAPI streaming tape driver.
- *
- * Copyright (C) 1995-1999 Gadi Oxman <gadio@...vision.net.il>
- * Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz
- *
- * This driver was constructed as a student project in the software laboratory
- * of the faculty of electrical engineering in the Technion - Israel's
- * Institute Of Technology, with the guide of Avner Lottem and Dr. Ilana David.
- *
- * It is hereby placed under the terms of the GNU general public license.
- * (See linux/COPYING).
- *
- * For a historical changelog see
- * Documentation/ide/ChangeLog.ide-tape.1995-2002
- */
-
-#define DRV_NAME "ide-tape"
-
-#define IDETAPE_VERSION "1.20"
-
-#include <linux/compat.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/jiffies.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/completion.h>
-#include <linux/bitops.h>
-#include <linux/mutex.h>
-#include <scsi/scsi.h>
-
-#include <asm/byteorder.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <asm/unaligned.h>
-#include <linux/mtio.h>
-
-/* define to see debug info */
-#undef IDETAPE_DEBUG_LOG
-
-#ifdef IDETAPE_DEBUG_LOG
-#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
-#else
-#define ide_debug_log(lvl, fmt, args...) do {} while (0)
-#endif
-
-/**************************** Tunable parameters *****************************/
-/*
- * After each failed packet command we issue a request sense command and retry
- * the packet command IDETAPE_MAX_PC_RETRIES times.
- *
- * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
- */
-#define IDETAPE_MAX_PC_RETRIES 3
-
-/*
- * The following parameter is used to select the point in the internal tape fifo
- * in which we will start to refill the buffer. Decreasing the following
- * parameter will improve the system's latency and interactive response, while
- * using a high value might improve system throughput.
- */
-#define IDETAPE_FIFO_THRESHOLD 2
-
-/*
- * DSC polling parameters.
- *
- * Polling for DSC (a single bit in the status register) is a very important
- * function in ide-tape. There are two cases in which we poll for DSC:
- *
- * 1. Before a read/write packet command, to ensure that we can transfer data
- * from/to the tape's data buffers, without causing an actual media access.
- * In case the tape is not ready yet, we take out our request from the device
- * request queue, so that ide.c could service requests from the other device
- * on the same interface in the meantime.
- *
- * 2. After the successful initialization of a "media access packet command",
- * which is a command that can take a long time to complete (the interval can
- * range from several seconds to even an hour). Again, we postpone our request
- * in the middle to free the bus for the other device. The polling frequency
- * here should be lower than the read/write frequency since those media access
- * commands are slow. We start from a "fast" frequency - IDETAPE_DSC_MA_FAST
- * (1 second), and if we don't receive DSC after IDETAPE_DSC_MA_THRESHOLD
- * (5 min), we switch it to a lower frequency - IDETAPE_DSC_MA_SLOW (1 min).
- *
- * We also set a timeout for the timer, in case something goes wrong. The
- * timeout should be longer then the maximum execution time of a tape operation.
- */
-
-/* DSC timings. */
-#define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */
-#define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */
-#define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */
-#define IDETAPE_DSC_MA_FAST 2*HZ /* 2 seconds */
-#define IDETAPE_DSC_MA_THRESHOLD 5*60*HZ /* 5 minutes */
-#define IDETAPE_DSC_MA_SLOW 30*HZ /* 30 seconds */
-#define IDETAPE_DSC_MA_TIMEOUT 2*60*60*HZ /* 2 hours */
-
-/*************************** End of tunable parameters ***********************/
-
-/* tape directions */
-enum {
- IDETAPE_DIR_NONE = (1 << 0),
- IDETAPE_DIR_READ = (1 << 1),
- IDETAPE_DIR_WRITE = (1 << 2),
-};
-
-/* Tape door status */
-#define DOOR_UNLOCKED 0
-#define DOOR_LOCKED 1
-#define DOOR_EXPLICITLY_LOCKED 2
-
-/* Some defines for the SPACE command */
-#define IDETAPE_SPACE_OVER_FILEMARK 1
-#define IDETAPE_SPACE_TO_EOD 3
-
-/* Some defines for the LOAD UNLOAD command */
-#define IDETAPE_LU_LOAD_MASK 1
-#define IDETAPE_LU_RETENSION_MASK 2
-#define IDETAPE_LU_EOT_MASK 4
-
-/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
-#define IDETAPE_BLOCK_DESCRIPTOR 0
-#define IDETAPE_CAPABILITIES_PAGE 0x2a
-
-/*
- * Most of our global data which we need to save even as we leave the driver due
- * to an interrupt or a timer event is stored in the struct defined below.
- */
-typedef struct ide_tape_obj {
- ide_drive_t *drive;
- struct ide_driver *driver;
- struct gendisk *disk;
- struct device dev;
-
- /* used by REQ_IDETAPE_{READ,WRITE} requests */
- struct ide_atapi_pc queued_pc;
-
- /*
- * DSC polling variables.
- *
- * While polling for DSC we use postponed_rq to postpone the current
- * request so that ide.c will be able to service pending requests on the
- * other device. Note that at most we will have only one DSC (usually
- * data transfer) request in the device request queue.
- */
- bool postponed_rq;
-
- /* The time in which we started polling for DSC */
- unsigned long dsc_polling_start;
- /* Timer used to poll for dsc */
- struct timer_list dsc_timer;
- /* Read/Write dsc polling frequency */
- unsigned long best_dsc_rw_freq;
- unsigned long dsc_poll_freq;
- unsigned long dsc_timeout;
-
- /* Read position information */
- u8 partition;
- /* Current block */
- unsigned int first_frame;
-
- /* Last error information */
- u8 sense_key, asc, ascq;
-
- /* Character device operation */
- unsigned int minor;
- /* device name */
- char name[4];
- /* Current character device data transfer direction */
- u8 chrdev_dir;
-
- /* tape block size, usually 512 or 1024 bytes */
- unsigned short blk_size;
- int user_bs_factor;
-
- /* Copy of the tape's Capabilities and Mechanical Page */
- u8 caps[20];
-
- /*
- * Active data transfer request parameters.
- *
- * At most, there is only one ide-tape originated data transfer request
- * in the device request queue. This allows ide.c to easily service
- * requests from the other device when we postpone our active request.
- */
-
- /* Data buffer size chosen based on the tape's recommendation */
- int buffer_size;
- /* Staging buffer of buffer_size bytes */
- void *buf;
- /* The read/write cursor */
- void *cur;
- /* The number of valid bytes in buf */
- size_t valid;
-
- /* Measures average tape speed */
- unsigned long avg_time;
- int avg_size;
- int avg_speed;
-
- /* the door is currently locked */
- int door_locked;
- /* the tape hardware is write protected */
- char drv_write_prot;
- /* the tape is write protected (hardware or opened as read-only) */
- char write_prot;
-} idetape_tape_t;
-
-static DEFINE_MUTEX(ide_tape_mutex);
-static DEFINE_MUTEX(idetape_ref_mutex);
-
-static DEFINE_MUTEX(idetape_chrdev_mutex);
-
-static struct class *idetape_sysfs_class;
-
-static void ide_tape_release(struct device *);
-
-static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
-
-static struct ide_tape_obj *ide_tape_get(struct gendisk *disk, bool cdev,
- unsigned int i)
-{
- struct ide_tape_obj *tape = NULL;
-
- mutex_lock(&idetape_ref_mutex);
-
- if (cdev)
- tape = idetape_devs[i];
- else
- tape = ide_drv_g(disk, ide_tape_obj);
-
- if (tape) {
- if (ide_device_get(tape->drive))
- tape = NULL;
- else
- get_device(&tape->dev);
- }
-
- mutex_unlock(&idetape_ref_mutex);
- return tape;
-}
-
-static void ide_tape_put(struct ide_tape_obj *tape)
-{
- ide_drive_t *drive = tape->drive;
-
- mutex_lock(&idetape_ref_mutex);
- put_device(&tape->dev);
- ide_device_put(drive);
- mutex_unlock(&idetape_ref_mutex);
-}
-
-/*
- * called on each failed packet command retry to analyze the request sense. We
- * currently do not utilize this information.
- */
-static void idetape_analyze_error(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = drive->failed_pc;
- struct request *rq = drive->hwif->rq;
- u8 *sense = bio_data(rq->bio);
-
- tape->sense_key = sense[2] & 0xF;
- tape->asc = sense[12];
- tape->ascq = sense[13];
-
- ide_debug_log(IDE_DBG_FUNC,
- "cmd: 0x%x, sense key = %x, asc = %x, ascq = %x",
- rq->cmd[0], tape->sense_key, tape->asc, tape->ascq);
-
- /* correct remaining bytes to transfer */
- if (pc->flags & PC_FLAG_DMA_ERROR)
- scsi_req(rq)->resid_len = tape->blk_size * get_unaligned_be32(&sense[3]);
-
- /*
- * If error was the result of a zero-length read or write command,
- * with sense key=5, asc=0x22, ascq=0, let it slide. Some drives
- * (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
- */
- if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6)
- /* length == 0 */
- && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) {
- if (tape->sense_key == 5) {
- /* don't report an error, everything's ok */
- pc->error = 0;
- /* don't retry read/write */
- pc->flags |= PC_FLAG_ABORT;
- }
- }
- if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
- pc->error = IDE_DRV_ERROR_FILEMARK;
- pc->flags |= PC_FLAG_ABORT;
- }
- if (pc->c[0] == WRITE_6) {
- if ((sense[2] & 0x40) || (tape->sense_key == 0xd
- && tape->asc == 0x0 && tape->ascq == 0x2)) {
- pc->error = IDE_DRV_ERROR_EOD;
- pc->flags |= PC_FLAG_ABORT;
- }
- }
- if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
- if (tape->sense_key == 8) {
- pc->error = IDE_DRV_ERROR_EOD;
- pc->flags |= PC_FLAG_ABORT;
- }
- if (!(pc->flags & PC_FLAG_ABORT) &&
- (blk_rq_bytes(rq) - scsi_req(rq)->resid_len))
- pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
- }
-}
-
-static void ide_tape_handle_dsc(ide_drive_t *);
-
-static int ide_tape_callback(ide_drive_t *drive, int dsc)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = drive->pc;
- struct request *rq = drive->hwif->rq;
- int uptodate = pc->error ? 0 : 1;
- int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
-
- ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc: %d, err: %d", rq->cmd[0],
- dsc, err);
-
- if (dsc)
- ide_tape_handle_dsc(drive);
-
- if (drive->failed_pc == pc)
- drive->failed_pc = NULL;
-
- if (pc->c[0] == REQUEST_SENSE) {
- if (uptodate)
- idetape_analyze_error(drive);
- else
- printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
- "itself - Aborting request!\n");
- } else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
- unsigned int blocks =
- (blk_rq_bytes(rq) - scsi_req(rq)->resid_len) / tape->blk_size;
-
- tape->avg_size += blocks * tape->blk_size;
-
- if (time_after_eq(jiffies, tape->avg_time + HZ)) {
- tape->avg_speed = tape->avg_size * HZ /
- (jiffies - tape->avg_time) / 1024;
- tape->avg_size = 0;
- tape->avg_time = jiffies;
- }
-
- tape->first_frame += blocks;
-
- if (pc->error) {
- uptodate = 0;
- err = pc->error;
- }
- }
- scsi_req(rq)->result = err;
-
- return uptodate;
-}
-
-/*
- * Postpone the current request so that ide.c will be able to service requests
- * from another device on the same port while we are polling for DSC.
- */
-static void ide_tape_stall_queue(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc_poll_freq: %lu",
- drive->hwif->rq->cmd[0], tape->dsc_poll_freq);
-
- tape->postponed_rq = true;
-
- ide_stall_queue(drive, tape->dsc_poll_freq);
-}
-
-static void ide_tape_handle_dsc(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- /* Media access command */
- tape->dsc_polling_start = jiffies;
- tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
- tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
- /* Allow ide.c to handle other requests */
- ide_tape_stall_queue(drive);
-}
-
-/*
- * Packet Command Interface
- *
- * The current Packet Command is available in drive->pc, and will not change
- * until we finish handling it. Each packet command is associated with a
- * callback function that will be called when the command is finished.
- *
- * The handling will be done in three stages:
- *
- * 1. ide_tape_issue_pc will send the packet command to the drive, and will set
- * the interrupt handler to ide_pc_intr.
- *
- * 2. On each interrupt, ide_pc_intr will be called. This step will be
- * repeated until the device signals us that no more interrupts will be issued.
- *
- * 3. ATAPI Tape media access commands have immediate status with a delayed
- * process. In case of a successful initiation of a media access packet command,
- * the DSC bit will be set when the actual execution of the command is finished.
- * Since the tape drive will not issue an interrupt, we have to poll for this
- * event. In this case, we define the request as "low priority request" by
- * setting rq_status to IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and
- * exit the driver.
- *
- * ide.c will then give higher priority to requests which originate from the
- * other device, until will change rq_status to RQ_ACTIVE.
- *
- * 4. When the packet command is finished, it will be checked for errors.
- *
- * 5. In case an error was found, we queue a request sense packet command in
- * front of the request queue and retry the operation up to
- * IDETAPE_MAX_PC_RETRIES times.
- *
- * 6. In case no error was found, or we decided to give up and not to retry
- * again, the callback function will be called and then we will handle the next
- * request.
- */
-
-static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
- struct ide_cmd *cmd,
- struct ide_atapi_pc *pc)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct request *rq = drive->hwif->rq;
-
- if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
- drive->failed_pc = pc;
-
- /* Set the current packet command */
- drive->pc = pc;
-
- if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
- (pc->flags & PC_FLAG_ABORT)) {
-
- /*
- * We will "abort" retrying a packet command in case legitimate
- * error code was received (crossing a filemark, or end of the
- * media, for example).
- */
- if (!(pc->flags & PC_FLAG_ABORT)) {
- if (!(pc->c[0] == TEST_UNIT_READY &&
- tape->sense_key == 2 && tape->asc == 4 &&
- (tape->ascq == 1 || tape->ascq == 8))) {
- printk(KERN_ERR "ide-tape: %s: I/O error, "
- "pc = %2x, key = %2x, "
- "asc = %2x, ascq = %2x\n",
- tape->name, pc->c[0],
- tape->sense_key, tape->asc,
- tape->ascq);
- }
- /* Giving up */
- pc->error = IDE_DRV_ERROR_GENERAL;
- }
-
- drive->failed_pc = NULL;
- drive->pc_callback(drive, 0);
- ide_complete_rq(drive, BLK_STS_IOERR, blk_rq_bytes(rq));
- return ide_stopped;
- }
- ide_debug_log(IDE_DBG_SENSE, "retry #%d, cmd: 0x%02x", pc->retries,
- pc->c[0]);
-
- pc->retries++;
-
- return ide_issue_pc(drive, cmd);
-}
-
-/* A mode sense command is used to "sense" tape parameters. */
-static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
-{
- ide_init_pc(pc);
- pc->c[0] = MODE_SENSE;
- if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
- /* DBD = 1 - Don't return block descriptors */
- pc->c[1] = 8;
- pc->c[2] = page_code;
- /*
- * Changed pc->c[3] to 0 (255 will at best return unused info).
- *
- * For SCSI this byte is defined as subpage instead of high byte
- * of length and some IDE drives seem to interpret it this way
- * and return an error when 255 is used.
- */
- pc->c[3] = 0;
- /* We will just discard data in that case */
- pc->c[4] = 255;
- if (page_code == IDETAPE_BLOCK_DESCRIPTOR)
- pc->req_xfer = 12;
- else if (page_code == IDETAPE_CAPABILITIES_PAGE)
- pc->req_xfer = 24;
- else
- pc->req_xfer = 50;
-}
-
-static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = drive->pc;
- u8 stat;
-
- stat = hwif->tp_ops->read_status(hwif);
-
- if (stat & ATA_DSC) {
- if (stat & ATA_ERR) {
- /* Error detected */
- if (pc->c[0] != TEST_UNIT_READY)
- printk(KERN_ERR "ide-tape: %s: I/O error, ",
- tape->name);
- /* Retry operation */
- ide_retry_pc(drive);
- return ide_stopped;
- }
- pc->error = 0;
- } else {
- pc->error = IDE_DRV_ERROR_GENERAL;
- drive->failed_pc = NULL;
- }
- drive->pc_callback(drive, 0);
- return ide_stopped;
-}
-
-static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
- struct ide_atapi_pc *pc, struct request *rq,
- u8 opcode)
-{
- unsigned int length = blk_rq_sectors(rq) / (tape->blk_size >> 9);
-
- ide_init_pc(pc);
- put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
- pc->c[1] = 1;
-
- if (blk_rq_bytes(rq) == tape->buffer_size)
- pc->flags |= PC_FLAG_DMA_OK;
-
- if (opcode == READ_6)
- pc->c[0] = READ_6;
- else if (opcode == WRITE_6) {
- pc->c[0] = WRITE_6;
- pc->flags |= PC_FLAG_WRITING;
- }
-
- memcpy(scsi_req(rq)->cmd, pc->c, 12);
-}
-
-static ide_startstop_t idetape_do_request(ide_drive_t *drive,
- struct request *rq, sector_t block)
-{
- ide_hwif_t *hwif = drive->hwif;
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = NULL;
- struct ide_cmd cmd;
- struct scsi_request *req = scsi_req(rq);
- u8 stat;
-
- ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, sector: %llu, nr_sectors: %u",
- req->cmd[0], (unsigned long long)blk_rq_pos(rq),
- blk_rq_sectors(rq));
-
- BUG_ON(!blk_rq_is_private(rq));
- BUG_ON(ide_req(rq)->type != ATA_PRIV_MISC &&
- ide_req(rq)->type != ATA_PRIV_SENSE);
-
- /* Retry a failed packet command */
- if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
- pc = drive->failed_pc;
- goto out;
- }
-
- /*
- * If the tape is still busy, postpone our request and service
- * the other device meanwhile.
- */
- stat = hwif->tp_ops->read_status(hwif);
-
- if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
- (req->cmd[13] & REQ_IDETAPE_PC2) == 0)
- drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
-
- if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
- drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
- drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
- }
-
- if (!(drive->atapi_flags & IDE_AFLAG_IGNORE_DSC) &&
- !(stat & ATA_DSC)) {
- if (!tape->postponed_rq) {
- tape->dsc_polling_start = jiffies;
- tape->dsc_poll_freq = tape->best_dsc_rw_freq;
- tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT;
- } else if (time_after(jiffies, tape->dsc_timeout)) {
- printk(KERN_ERR "ide-tape: %s: DSC timeout\n",
- tape->name);
- if (req->cmd[13] & REQ_IDETAPE_PC2) {
- idetape_media_access_finished(drive);
- return ide_stopped;
- } else {
- return ide_do_reset(drive);
- }
- } else if (time_after(jiffies,
- tape->dsc_polling_start +
- IDETAPE_DSC_MA_THRESHOLD))
- tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
- ide_tape_stall_queue(drive);
- return ide_stopped;
- } else {
- drive->atapi_flags &= ~IDE_AFLAG_IGNORE_DSC;
- tape->postponed_rq = false;
- }
-
- if (req->cmd[13] & REQ_IDETAPE_READ) {
- pc = &tape->queued_pc;
- ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
- goto out;
- }
- if (req->cmd[13] & REQ_IDETAPE_WRITE) {
- pc = &tape->queued_pc;
- ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
- goto out;
- }
- if (req->cmd[13] & REQ_IDETAPE_PC1) {
- pc = (struct ide_atapi_pc *)ide_req(rq)->special;
- req->cmd[13] &= ~(REQ_IDETAPE_PC1);
- req->cmd[13] |= REQ_IDETAPE_PC2;
- goto out;
- }
- if (req->cmd[13] & REQ_IDETAPE_PC2) {
- idetape_media_access_finished(drive);
- return ide_stopped;
- }
- BUG();
-
-out:
- /* prepare sense request for this command */
- ide_prep_sense(drive, rq);
-
- memset(&cmd, 0, sizeof(cmd));
-
- if (rq_data_dir(rq))
- cmd.tf_flags |= IDE_TFLAG_WRITE;
-
- cmd.rq = rq;
-
- ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
- ide_map_sg(drive, &cmd);
-
- return ide_tape_issue_pc(drive, &cmd, pc);
-}
-
-/*
- * Write a filemark if write_filemark=1. Flush the device buffers without
- * writing a filemark otherwise.
- */
-static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int write_filemark)
-{
- ide_init_pc(pc);
- pc->c[0] = WRITE_FILEMARKS;
- pc->c[4] = write_filemark;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
-static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct gendisk *disk = tape->disk;
- int load_attempted = 0;
-
- /* Wait for the tape to become ready */
- set_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), &drive->atapi_flags);
- timeout += jiffies;
- while (time_before(jiffies, timeout)) {
- if (ide_do_test_unit_ready(drive, disk) == 0)
- return 0;
- if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
- || (tape->asc == 0x3A)) {
- /* no media */
- if (load_attempted)
- return -ENOMEDIUM;
- ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
- load_attempted = 1;
- /* not about to be ready */
- } else if (!(tape->sense_key == 2 && tape->asc == 4 &&
- (tape->ascq == 1 || tape->ascq == 8)))
- return -EIO;
- msleep(100);
- }
- return -EIO;
-}
-
-static int idetape_flush_tape_buffers(ide_drive_t *drive)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct ide_atapi_pc pc;
- int rc;
-
- idetape_create_write_filemark_cmd(drive, &pc, 0);
- rc = ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0);
- if (rc)
- return rc;
- idetape_wait_ready(drive, 60 * 5 * HZ);
- return 0;
-}
-
-static int ide_tape_read_position(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc pc;
- u8 buf[20];
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- /* prep cmd */
- ide_init_pc(&pc);
- pc.c[0] = READ_POSITION;
- pc.req_xfer = 20;
-
- if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer))
- return -1;
-
- if (!pc.error) {
- ide_debug_log(IDE_DBG_FUNC, "BOP - %s",
- (buf[0] & 0x80) ? "Yes" : "No");
- ide_debug_log(IDE_DBG_FUNC, "EOP - %s",
- (buf[0] & 0x40) ? "Yes" : "No");
-
- if (buf[0] & 0x4) {
- printk(KERN_INFO "ide-tape: Block location is unknown"
- "to the tape\n");
- clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
- &drive->atapi_flags);
- return -1;
- } else {
- ide_debug_log(IDE_DBG_FUNC, "Block Location: %u",
- be32_to_cpup((__be32 *)&buf[4]));
-
- tape->partition = buf[1];
- tape->first_frame = be32_to_cpup((__be32 *)&buf[4]);
- set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
- &drive->atapi_flags);
- }
- }
-
- return tape->first_frame;
-}
-
-static void idetape_create_locate_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc,
- unsigned int block, u8 partition, int skip)
-{
- ide_init_pc(pc);
- pc->c[0] = POSITION_TO_ELEMENT;
- pc->c[1] = 2;
- put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
- pc->c[8] = partition;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
-static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- if (tape->chrdev_dir != IDETAPE_DIR_READ)
- return;
-
- clear_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags);
- tape->valid = 0;
- if (tape->buf != NULL) {
- kfree(tape->buf);
- tape->buf = NULL;
- }
-
- tape->chrdev_dir = IDETAPE_DIR_NONE;
-}
-
-/*
- * Position the tape to the requested block using the LOCATE packet command.
- * A READ POSITION command is then issued to check where we are positioned. Like
- * all higher level operations, we queue the commands at the tail of the request
- * queue and wait for their completion.
- */
-static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
- u8 partition, int skip)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct gendisk *disk = tape->disk;
- int ret;
- struct ide_atapi_pc pc;
-
- if (tape->chrdev_dir == IDETAPE_DIR_READ)
- __ide_tape_discard_merge_buffer(drive);
- idetape_wait_ready(drive, 60 * 5 * HZ);
- idetape_create_locate_cmd(drive, &pc, block, partition, skip);
- ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
- if (ret)
- return ret;
-
- ret = ide_tape_read_position(drive);
- if (ret < 0)
- return ret;
- return 0;
-}
-
-static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
- int restore_position)
-{
- idetape_tape_t *tape = drive->driver_data;
- int seek, position;
-
- __ide_tape_discard_merge_buffer(drive);
- if (restore_position) {
- position = ide_tape_read_position(drive);
- seek = position > 0 ? position : 0;
- if (idetape_position_tape(drive, seek, 0, 0)) {
- printk(KERN_INFO "ide-tape: %s: position_tape failed in"
- " %s\n", tape->name, __func__);
- return;
- }
- }
-}
-
-/*
- * Generate a read/write request for the block device interface and wait for it
- * to be serviced.
- */
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct request *rq;
- int ret;
-
- ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, size: %d", cmd, size);
-
- BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
- BUG_ON(size < 0 || size % tape->blk_size);
-
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_MISC;
- scsi_req(rq)->cmd[13] = cmd;
- rq->rq_disk = tape->disk;
- rq->__sector = tape->first_frame;
-
- if (size) {
- ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
- GFP_NOIO);
- if (ret)
- goto out_put;
- }
-
- blk_execute_rq(tape->disk, rq, 0);
-
- /* calculate the number of transferred bytes and update buffer state */
- size -= scsi_req(rq)->resid_len;
- tape->cur = tape->buf;
- if (cmd == REQ_IDETAPE_READ)
- tape->valid = size;
- else
- tape->valid = 0;
-
- ret = size;
- if (scsi_req(rq)->result == IDE_DRV_ERROR_GENERAL)
- ret = -EIO;
-out_put:
- blk_put_request(rq);
- return ret;
-}
-
-static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = INQUIRY;
- pc->c[4] = 254;
- pc->req_xfer = 254;
-}
-
-static void idetape_create_rewind_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = REZERO_UNIT;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
-static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = ERASE;
- pc->c[1] = 1;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
-static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
-{
- ide_init_pc(pc);
- pc->c[0] = SPACE;
- put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
- pc->c[1] = cmd;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
-static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
- printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
- " but we are not writing.\n");
- return;
- }
- if (tape->buf) {
- size_t aligned = roundup(tape->valid, tape->blk_size);
-
- memset(tape->cur, 0, aligned - tape->valid);
- idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned);
- kfree(tape->buf);
- tape->buf = NULL;
- }
- tape->chrdev_dir = IDETAPE_DIR_NONE;
-}
-
-static int idetape_init_rw(ide_drive_t *drive, int dir)
-{
- idetape_tape_t *tape = drive->driver_data;
- int rc;
-
- BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE);
-
- if (tape->chrdev_dir == dir)
- return 0;
-
- if (tape->chrdev_dir == IDETAPE_DIR_READ)
- ide_tape_discard_merge_buffer(drive, 1);
- else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
- ide_tape_flush_merge_buffer(drive);
- idetape_flush_tape_buffers(drive);
- }
-
- if (tape->buf || tape->valid) {
- printk(KERN_ERR "ide-tape: valid should be 0 now\n");
- tape->valid = 0;
- }
-
- tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
- if (!tape->buf)
- return -ENOMEM;
- tape->chrdev_dir = dir;
- tape->cur = tape->buf;
-
- /*
- * Issue a 0 rw command to ensure that DSC handshake is
- * switched from completion mode to buffer available mode. No
- * point in issuing this if DSC overlap isn't supported, some
- * drives (Seagate STT3401A) will return an error.
- */
- if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
- int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ
- : REQ_IDETAPE_WRITE;
-
- rc = idetape_queue_rw_tail(drive, cmd, 0);
- if (rc < 0) {
- kfree(tape->buf);
- tape->buf = NULL;
- tape->chrdev_dir = IDETAPE_DIR_NONE;
- return rc;
- }
- }
-
- return 0;
-}
-
-static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- memset(tape->buf, 0, tape->buffer_size);
-
- while (bcount) {
- unsigned int count = min(tape->buffer_size, bcount);
-
- idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count);
- bcount -= count;
- }
-}
-
-/*
- * Rewinds the tape to the Beginning Of the current Partition (BOP). We
- * currently support only one partition.
- */
-static int idetape_rewind_tape(ide_drive_t *drive)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct gendisk *disk = tape->disk;
- struct ide_atapi_pc pc;
- int ret;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- idetape_create_rewind_cmd(drive, &pc);
- ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
- if (ret)
- return ret;
-
- ret = ide_tape_read_position(drive);
- if (ret < 0)
- return ret;
- return 0;
-}
-
-/* mtio.h compatible commands should be issued to the chrdev interface. */
-static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
- unsigned long arg)
-{
- idetape_tape_t *tape = drive->driver_data;
- void __user *argp = (void __user *)arg;
-
- struct idetape_config {
- int dsc_rw_frequency;
- int dsc_media_access_frequency;
- int nr_stages;
- } config;
-
- ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%04x", cmd);
-
- switch (cmd) {
- case 0x0340:
- if (copy_from_user(&config, argp, sizeof(config)))
- return -EFAULT;
- tape->best_dsc_rw_freq = config.dsc_rw_frequency;
- break;
- case 0x0350:
- memset(&config, 0, sizeof(config));
- config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
- config.nr_stages = 1;
- if (copy_to_user(argp, &config, sizeof(config)))
- return -EFAULT;
- break;
- default:
- return -EIO;
- }
- return 0;
-}
-
-static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
- int mt_count)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct gendisk *disk = tape->disk;
- struct ide_atapi_pc pc;
- int retval, count = 0;
- int sprev = !!(tape->caps[4] & 0x20);
-
-
- ide_debug_log(IDE_DBG_FUNC, "mt_op: %d, mt_count: %d", mt_op, mt_count);
-
- if (mt_count == 0)
- return 0;
- if (MTBSF == mt_op || MTBSFM == mt_op) {
- if (!sprev)
- return -EIO;
- mt_count = -mt_count;
- }
-
- if (tape->chrdev_dir == IDETAPE_DIR_READ) {
- tape->valid = 0;
- if (test_and_clear_bit(ilog2(IDE_AFLAG_FILEMARK),
- &drive->atapi_flags))
- ++count;
- ide_tape_discard_merge_buffer(drive, 0);
- }
-
- switch (mt_op) {
- case MTFSF:
- case MTBSF:
- idetape_create_space_cmd(&pc, mt_count - count,
- IDETAPE_SPACE_OVER_FILEMARK);
- return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
- case MTFSFM:
- case MTBSFM:
- if (!sprev)
- return -EIO;
- retval = idetape_space_over_filemarks(drive, MTFSF,
- mt_count - count);
- if (retval)
- return retval;
- count = (MTBSFM == mt_op ? 1 : -1);
- return idetape_space_over_filemarks(drive, MTFSF, count);
- default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
- mt_op);
- return -EIO;
- }
-}
-
-/*
- * Our character device read / write functions.
- *
- * The tape is optimized to maximize throughput when it is transferring an
- * integral number of the "continuous transfer limit", which is a parameter of
- * the specific tape (26kB on my particular tape, 32kB for Onstream).
- *
- * As of version 1.3 of the driver, the character device provides an abstract
- * continuous view of the media - any mix of block sizes (even 1 byte) on the
- * same backup/restore procedure is supported. The driver will internally
- * convert the requests to the recommended transfer unit, so that an unmatch
- * between the user's block size to the recommended size will only result in a
- * (slightly) increased driver overhead, but will no longer hit performance.
- * This is not applicable to Onstream.
- */
-static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct ide_tape_obj *tape = file->private_data;
- ide_drive_t *drive = tape->drive;
- size_t done = 0;
- ssize_t ret = 0;
- int rc;
-
- ide_debug_log(IDE_DBG_FUNC, "count %zd", count);
-
- if (tape->chrdev_dir != IDETAPE_DIR_READ) {
- if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
- if (count > tape->blk_size &&
- (count % tape->blk_size) == 0)
- tape->user_bs_factor = count / tape->blk_size;
- }
-
- rc = idetape_init_rw(drive, IDETAPE_DIR_READ);
- if (rc < 0)
- return rc;
-
- while (done < count) {
- size_t todo;
-
- /* refill if staging buffer is empty */
- if (!tape->valid) {
- /* If we are at a filemark, nothing more to read */
- if (test_bit(ilog2(IDE_AFLAG_FILEMARK),
- &drive->atapi_flags))
- break;
- /* read */
- if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
- tape->buffer_size) <= 0)
- break;
- }
-
- /* copy out */
- todo = min_t(size_t, count - done, tape->valid);
- if (copy_to_user(buf + done, tape->cur, todo))
- ret = -EFAULT;
-
- tape->cur += todo;
- tape->valid -= todo;
- done += todo;
- }
-
- if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
- idetape_space_over_filemarks(drive, MTFSF, 1);
- return 0;
- }
-
- return ret ? ret : done;
-}
-
-static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct ide_tape_obj *tape = file->private_data;
- ide_drive_t *drive = tape->drive;
- size_t done = 0;
- ssize_t ret = 0;
- int rc;
-
- /* The drive is write protected. */
- if (tape->write_prot)
- return -EACCES;
-
- ide_debug_log(IDE_DBG_FUNC, "count %zd", count);
-
- /* Initialize write operation */
- rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
- if (rc < 0)
- return rc;
-
- while (done < count) {
- size_t todo;
-
- /* flush if staging buffer is full */
- if (tape->valid == tape->buffer_size &&
- idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
- tape->buffer_size) <= 0)
- return rc;
-
- /* copy in */
- todo = min_t(size_t, count - done,
- tape->buffer_size - tape->valid);
- if (copy_from_user(tape->cur, buf + done, todo))
- ret = -EFAULT;
-
- tape->cur += todo;
- tape->valid += todo;
- done += todo;
- }
-
- return ret ? ret : done;
-}
-
-static int idetape_write_filemark(ide_drive_t *drive)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct ide_atapi_pc pc;
-
- /* Write a filemark */
- idetape_create_write_filemark_cmd(drive, &pc, 1);
- if (ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0)) {
- printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
- return -EIO;
- }
- return 0;
-}
-
-/*
- * Called from idetape_chrdev_ioctl when the general mtio MTIOCTOP ioctl is
- * requested.
- *
- * Note: MTBSF and MTBSFM are not supported when the tape doesn't support
- * spacing over filemarks in the reverse direction. In this case, MTFSFM is also
- * usually not supported.
- *
- * The following commands are currently not supported:
- *
- * MTFSS, MTBSS, MTWSM, MTSETDENSITY, MTSETDRVBUFFER, MT_ST_BOOLEANS,
- * MT_ST_WRITE_THRESHOLD.
- */
-static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct gendisk *disk = tape->disk;
- struct ide_atapi_pc pc;
- int i, retval;
-
- ide_debug_log(IDE_DBG_FUNC, "MTIOCTOP ioctl: mt_op: %d, mt_count: %d",
- mt_op, mt_count);
-
- switch (mt_op) {
- case MTFSF:
- case MTFSFM:
- case MTBSF:
- case MTBSFM:
- if (!mt_count)
- return 0;
- return idetape_space_over_filemarks(drive, mt_op, mt_count);
- default:
- break;
- }
-
- switch (mt_op) {
- case MTWEOF:
- if (tape->write_prot)
- return -EACCES;
- ide_tape_discard_merge_buffer(drive, 1);
- for (i = 0; i < mt_count; i++) {
- retval = idetape_write_filemark(drive);
- if (retval)
- return retval;
- }
- return 0;
- case MTREW:
- ide_tape_discard_merge_buffer(drive, 0);
- if (idetape_rewind_tape(drive))
- return -EIO;
- return 0;
- case MTLOAD:
- ide_tape_discard_merge_buffer(drive, 0);
- return ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
- case MTUNLOAD:
- case MTOFFL:
- /*
- * If door is locked, attempt to unlock before
- * attempting to eject.
- */
- if (tape->door_locked) {
- if (!ide_set_media_lock(drive, disk, 0))
- tape->door_locked = DOOR_UNLOCKED;
- }
- ide_tape_discard_merge_buffer(drive, 0);
- retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
- if (!retval)
- clear_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
- &drive->atapi_flags);
- return retval;
- case MTNOP:
- ide_tape_discard_merge_buffer(drive, 0);
- return idetape_flush_tape_buffers(drive);
- case MTRETEN:
- ide_tape_discard_merge_buffer(drive, 0);
- return ide_do_start_stop(drive, disk,
- IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
- case MTEOM:
- idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
- return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
- case MTERASE:
- (void)idetape_rewind_tape(drive);
- idetape_create_erase_cmd(&pc);
- return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
- case MTSETBLK:
- if (mt_count) {
- if (mt_count < tape->blk_size ||
- mt_count % tape->blk_size)
- return -EIO;
- tape->user_bs_factor = mt_count / tape->blk_size;
- clear_bit(ilog2(IDE_AFLAG_DETECT_BS),
- &drive->atapi_flags);
- } else
- set_bit(ilog2(IDE_AFLAG_DETECT_BS),
- &drive->atapi_flags);
- return 0;
- case MTSEEK:
- ide_tape_discard_merge_buffer(drive, 0);
- return idetape_position_tape(drive,
- mt_count * tape->user_bs_factor, tape->partition, 0);
- case MTSETPART:
- ide_tape_discard_merge_buffer(drive, 0);
- return idetape_position_tape(drive, 0, mt_count, 0);
- case MTFSR:
- case MTBSR:
- case MTLOCK:
- retval = ide_set_media_lock(drive, disk, 1);
- if (retval)
- return retval;
- tape->door_locked = DOOR_EXPLICITLY_LOCKED;
- return 0;
- case MTUNLOCK:
- retval = ide_set_media_lock(drive, disk, 0);
- if (retval)
- return retval;
- tape->door_locked = DOOR_UNLOCKED;
- return 0;
- default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
- mt_op);
- return -EIO;
- }
-}
-
-/*
- * Our character device ioctls. General mtio.h magnetic io commands are
- * supported here, and not in the corresponding block interface. Our own
- * ide-tape ioctls are supported on both interfaces.
- */
-static long do_idetape_chrdev_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct ide_tape_obj *tape = file->private_data;
- ide_drive_t *drive = tape->drive;
- struct mtop mtop;
- struct mtget mtget;
- struct mtpos mtpos;
- int block_offset = 0, position = tape->first_frame;
- void __user *argp = (void __user *)arg;
-
- ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x", cmd);
-
- if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
- ide_tape_flush_merge_buffer(drive);
- idetape_flush_tape_buffers(drive);
- }
- if (cmd == MTIOCGET || cmd == MTIOCPOS) {
- block_offset = tape->valid /
- (tape->blk_size * tape->user_bs_factor);
- position = ide_tape_read_position(drive);
- if (position < 0)
- return -EIO;
- }
- switch (cmd) {
- case MTIOCTOP:
- if (copy_from_user(&mtop, argp, sizeof(struct mtop)))
- return -EFAULT;
- return idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count);
- case MTIOCGET:
- memset(&mtget, 0, sizeof(struct mtget));
- mtget.mt_type = MT_ISSCSI2;
- mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
- mtget.mt_dsreg =
- ((tape->blk_size * tape->user_bs_factor)
- << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
-
- if (tape->drv_write_prot)
- mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
-
- return put_user_mtget(argp, &mtget);
- case MTIOCPOS:
- mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
- return put_user_mtpos(argp, &mtpos);
- default:
- if (tape->chrdev_dir == IDETAPE_DIR_READ)
- ide_tape_discard_merge_buffer(drive, 1);
- return idetape_blkdev_ioctl(drive, cmd, arg);
- }
-}
-
-static long idetape_chrdev_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- long ret;
- mutex_lock(&ide_tape_mutex);
- ret = do_idetape_chrdev_ioctl(file, cmd, arg);
- mutex_unlock(&ide_tape_mutex);
- return ret;
-}
-
-static long idetape_chrdev_compat_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- long ret;
-
- if (cmd == MTIOCPOS32)
- cmd = MTIOCPOS;
- else if (cmd == MTIOCGET32)
- cmd = MTIOCGET;
-
- mutex_lock(&ide_tape_mutex);
- ret = do_idetape_chrdev_ioctl(file, cmd, arg);
- mutex_unlock(&ide_tape_mutex);
- return ret;
-}
-
-/*
- * Do a mode sense page 0 with block descriptor and if it succeeds set the tape
- * block size with the reported value.
- */
-static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc pc;
- u8 buf[12];
-
- idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
- if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
- printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
- if (tape->blk_size == 0) {
- printk(KERN_WARNING "ide-tape: Cannot deal with zero "
- "block size, assuming 32k\n");
- tape->blk_size = 32768;
- }
- return;
- }
- tape->blk_size = (buf[4 + 5] << 16) +
- (buf[4 + 6] << 8) +
- buf[4 + 7];
- tape->drv_write_prot = (buf[2] & 0x80) >> 7;
-
- ide_debug_log(IDE_DBG_FUNC, "blk_size: %d, write_prot: %d",
- tape->blk_size, tape->drv_write_prot);
-}
-
-static int idetape_chrdev_open(struct inode *inode, struct file *filp)
-{
- unsigned int minor = iminor(inode), i = minor & ~0xc0;
- ide_drive_t *drive;
- idetape_tape_t *tape;
- int retval;
-
- if (i >= MAX_HWIFS * MAX_DRIVES)
- return -ENXIO;
-
- mutex_lock(&idetape_chrdev_mutex);
-
- tape = ide_tape_get(NULL, true, i);
- if (!tape) {
- mutex_unlock(&idetape_chrdev_mutex);
- return -ENXIO;
- }
-
- drive = tape->drive;
- filp->private_data = tape;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- /*
- * We really want to do nonseekable_open(inode, filp); here, but some
- * versions of tar incorrectly call lseek on tapes and bail out if that
- * fails. So we disallow pread() and pwrite(), but permit lseeks.
- */
- filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
-
-
- if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
- retval = -EBUSY;
- goto out_put_tape;
- }
-
- retval = idetape_wait_ready(drive, 60 * HZ);
- if (retval) {
- clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
- printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
- goto out_put_tape;
- }
-
- ide_tape_read_position(drive);
- if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
- (void)idetape_rewind_tape(drive);
-
- /* Read block size and write protect status from drive. */
- ide_tape_get_bsize_from_bdesc(drive);
-
- /* Set write protect flag if device is opened as read-only. */
- if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
- tape->write_prot = 1;
- else
- tape->write_prot = tape->drv_write_prot;
-
- /* Make sure drive isn't write protected if user wants to write. */
- if (tape->write_prot) {
- if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
- (filp->f_flags & O_ACCMODE) == O_RDWR) {
- clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
- retval = -EROFS;
- goto out_put_tape;
- }
- }
-
- /* Lock the tape drive door so user can't eject. */
- if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
- if (!ide_set_media_lock(drive, tape->disk, 1)) {
- if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
- tape->door_locked = DOOR_LOCKED;
- }
- }
- mutex_unlock(&idetape_chrdev_mutex);
-
- return 0;
-
-out_put_tape:
- ide_tape_put(tape);
-
- mutex_unlock(&idetape_chrdev_mutex);
-
- return retval;
-}
-
-static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- ide_tape_flush_merge_buffer(drive);
- tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
- if (tape->buf != NULL) {
- idetape_pad_zeros(drive, tape->blk_size *
- (tape->user_bs_factor - 1));
- kfree(tape->buf);
- tape->buf = NULL;
- }
- idetape_write_filemark(drive);
- idetape_flush_tape_buffers(drive);
- idetape_flush_tape_buffers(drive);
-}
-
-static int idetape_chrdev_release(struct inode *inode, struct file *filp)
-{
- struct ide_tape_obj *tape = filp->private_data;
- ide_drive_t *drive = tape->drive;
- unsigned int minor = iminor(inode);
-
- mutex_lock(&idetape_chrdev_mutex);
-
- tape = drive->driver_data;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
- idetape_write_release(drive, minor);
- if (tape->chrdev_dir == IDETAPE_DIR_READ) {
- if (minor < 128)
- ide_tape_discard_merge_buffer(drive, 1);
- }
-
- if (minor < 128 && test_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
- &drive->atapi_flags))
- (void) idetape_rewind_tape(drive);
-
- if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
- if (tape->door_locked == DOOR_LOCKED) {
- if (!ide_set_media_lock(drive, tape->disk, 0))
- tape->door_locked = DOOR_UNLOCKED;
- }
- }
- clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
- ide_tape_put(tape);
-
- mutex_unlock(&idetape_chrdev_mutex);
-
- return 0;
-}
-
-static void idetape_get_inquiry_results(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc pc;
- u8 pc_buf[256];
- char fw_rev[4], vendor_id[8], product_id[16];
-
- idetape_create_inquiry_cmd(&pc);
- if (ide_queue_pc_tail(drive, tape->disk, &pc, pc_buf, pc.req_xfer)) {
- printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
- tape->name);
- return;
- }
- memcpy(vendor_id, &pc_buf[8], 8);
- memcpy(product_id, &pc_buf[16], 16);
- memcpy(fw_rev, &pc_buf[32], 4);
-
- ide_fixstring(vendor_id, 8, 0);
- ide_fixstring(product_id, 16, 0);
- ide_fixstring(fw_rev, 4, 0);
-
- printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
- drive->name, tape->name, vendor_id, product_id, fw_rev);
-}
-
-/*
- * Ask the tape about its various parameters. In particular, we will adjust our
- * data transfer buffer size to the recommended value as returned by the tape.
- */
-static void idetape_get_mode_sense_results(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc pc;
- u8 buf[24], *caps;
- u8 speed, max_speed;
-
- idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
- if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
- printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
- " some default values\n");
- tape->blk_size = 512;
- put_unaligned(52, (u16 *)&tape->caps[12]);
- put_unaligned(540, (u16 *)&tape->caps[14]);
- put_unaligned(6*52, (u16 *)&tape->caps[16]);
- return;
- }
- caps = buf + 4 + buf[3];
-
- /* convert to host order and save for later use */
- speed = be16_to_cpup((__be16 *)&caps[14]);
- max_speed = be16_to_cpup((__be16 *)&caps[8]);
-
- *(u16 *)&caps[8] = max_speed;
- *(u16 *)&caps[12] = be16_to_cpup((__be16 *)&caps[12]);
- *(u16 *)&caps[14] = speed;
- *(u16 *)&caps[16] = be16_to_cpup((__be16 *)&caps[16]);
-
- if (!speed) {
- printk(KERN_INFO "ide-tape: %s: invalid tape speed "
- "(assuming 650KB/sec)\n", drive->name);
- *(u16 *)&caps[14] = 650;
- }
- if (!max_speed) {
- printk(KERN_INFO "ide-tape: %s: invalid max_speed "
- "(assuming 650KB/sec)\n", drive->name);
- *(u16 *)&caps[8] = 650;
- }
-
- memcpy(&tape->caps, caps, 20);
-
- /* device lacks locking support according to capabilities page */
- if ((caps[6] & 1) == 0)
- drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
-
- if (caps[7] & 0x02)
- tape->blk_size = 512;
- else if (caps[7] & 0x04)
- tape->blk_size = 1024;
-}
-
-#ifdef CONFIG_IDE_PROC_FS
-#define ide_tape_devset_get(name, field) \
-static int get_##name(ide_drive_t *drive) \
-{ \
- idetape_tape_t *tape = drive->driver_data; \
- return tape->field; \
-}
-
-#define ide_tape_devset_set(name, field) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
- idetape_tape_t *tape = drive->driver_data; \
- tape->field = arg; \
- return 0; \
-}
-
-#define ide_tape_devset_rw_field(_name, _field) \
-ide_tape_devset_get(_name, _field) \
-ide_tape_devset_set(_name, _field) \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-
-#define ide_tape_devset_r_field(_name, _field) \
-ide_tape_devset_get(_name, _field) \
-IDE_DEVSET(_name, 0, get_##_name, NULL)
-
-static int mulf_tdsc(ide_drive_t *drive) { return 1000; }
-static int divf_tdsc(ide_drive_t *drive) { return HZ; }
-static int divf_buffer(ide_drive_t *drive) { return 2; }
-static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
-
-ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
-
-ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
-
-ide_tape_devset_r_field(avg_speed, avg_speed);
-ide_tape_devset_r_field(speed, caps[14]);
-ide_tape_devset_r_field(buffer, caps[16]);
-ide_tape_devset_r_field(buffer_size, buffer_size);
-
-static const struct ide_proc_devset idetape_settings[] = {
- __IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL),
- __IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer),
- __IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size),
- __IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL),
- __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
- __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
- mulf_tdsc, divf_tdsc),
- { NULL },
-};
-#endif
-
-/*
- * The function below is called to:
- *
- * 1. Initialize our various state variables.
- * 2. Ask the tape for its capabilities.
- * 3. Allocate a buffer which will be used for data transfer. The buffer size
- * is chosen based on the recommendation which we received in step 2.
- *
- * Note that at this point ide.c already assigned us an irq, so that we can
- * queue requests here and wait for their completion.
- */
-static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
-{
- unsigned long t;
- int speed;
- u16 *ctl = (u16 *)&tape->caps[12];
-
- ide_debug_log(IDE_DBG_FUNC, "minor: %d", minor);
-
- drive->pc_callback = ide_tape_callback;
-
- drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
-
- if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
- printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
- tape->name);
- drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
- }
-
- /* Seagate Travan drives do not support DSC overlap. */
- if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
- drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
-
- tape->minor = minor;
- tape->name[0] = 'h';
- tape->name[1] = 't';
- tape->name[2] = '0' + minor;
- tape->chrdev_dir = IDETAPE_DIR_NONE;
-
- idetape_get_inquiry_results(drive);
- idetape_get_mode_sense_results(drive);
- ide_tape_get_bsize_from_bdesc(drive);
- tape->user_bs_factor = 1;
- tape->buffer_size = *ctl * tape->blk_size;
- while (tape->buffer_size > 0xffff) {
- printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
- *ctl /= 2;
- tape->buffer_size = *ctl * tape->blk_size;
- }
-
- /* select the "best" DSC read/write polling freq */
- speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
-
- t = (IDETAPE_FIFO_THRESHOLD * tape->buffer_size * HZ) / (speed * 1000);
-
- /*
- * Ensure that the number we got makes sense; limit it within
- * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
- */
- tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN,
- IDETAPE_DSC_RW_MAX);
- printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
- "%ums tDSC%s\n",
- drive->name, tape->name, *(u16 *)&tape->caps[14],
- (*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
- tape->buffer_size / 1024,
- jiffies_to_msecs(tape->best_dsc_rw_freq),
- (drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : "");
-
- ide_proc_register_driver(drive, tape->driver);
-}
-
-static void ide_tape_remove(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- ide_proc_unregister_driver(drive, tape->driver);
- device_del(&tape->dev);
-
- mutex_lock(&idetape_ref_mutex);
- put_device(&tape->dev);
- mutex_unlock(&idetape_ref_mutex);
-}
-
-static void ide_tape_release(struct device *dev)
-{
- struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
- ide_drive_t *drive = tape->drive;
- struct gendisk *g = tape->disk;
-
- BUG_ON(tape->valid);
-
- drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
- drive->driver_data = NULL;
- device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
- device_destroy(idetape_sysfs_class,
- MKDEV(IDETAPE_MAJOR, tape->minor + 128));
- idetape_devs[tape->minor] = NULL;
- g->private_data = NULL;
- put_disk(g);
- kfree(tape);
-}
-
-#ifdef CONFIG_IDE_PROC_FS
-static int idetape_name_proc_show(struct seq_file *m, void *v)
-{
- ide_drive_t *drive = (ide_drive_t *) m->private;
- idetape_tape_t *tape = drive->driver_data;
-
- seq_printf(m, "%s\n", tape->name);
- return 0;
-}
-
-static ide_proc_entry_t idetape_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, ide_capacity_proc_show },
- { "name", S_IFREG|S_IRUGO, idetape_name_proc_show },
- {}
-};
-
-static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive)
-{
- return idetape_proc;
-}
-
-static const struct ide_proc_devset *ide_tape_proc_devsets(ide_drive_t *drive)
-{
- return idetape_settings;
-}
-#endif
-
-static int ide_tape_probe(ide_drive_t *);
-
-static struct ide_driver idetape_driver = {
- .gen_driver = {
- .owner = THIS_MODULE,
- .name = "ide-tape",
- .bus = &ide_bus_type,
- },
- .probe = ide_tape_probe,
- .remove = ide_tape_remove,
- .version = IDETAPE_VERSION,
- .do_request = idetape_do_request,
-#ifdef CONFIG_IDE_PROC_FS
- .proc_entries = ide_tape_proc_entries,
- .proc_devsets = ide_tape_proc_devsets,
-#endif
-};
-
-/* Our character device supporting functions, passed to register_chrdev. */
-static const struct file_operations idetape_fops = {
- .owner = THIS_MODULE,
- .read = idetape_chrdev_read,
- .write = idetape_chrdev_write,
- .unlocked_ioctl = idetape_chrdev_ioctl,
- .compat_ioctl = IS_ENABLED(CONFIG_COMPAT) ?
- idetape_chrdev_compat_ioctl : NULL,
- .open = idetape_chrdev_open,
- .release = idetape_chrdev_release,
- .llseek = noop_llseek,
-};
-
-static int idetape_open(struct block_device *bdev, fmode_t mode)
-{
- struct ide_tape_obj *tape;
-
- mutex_lock(&ide_tape_mutex);
- tape = ide_tape_get(bdev->bd_disk, false, 0);
- mutex_unlock(&ide_tape_mutex);
-
- if (!tape)
- return -ENXIO;
-
- return 0;
-}
-
-static void idetape_release(struct gendisk *disk, fmode_t mode)
-{
- struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
-
- mutex_lock(&ide_tape_mutex);
- ide_tape_put(tape);
- mutex_unlock(&ide_tape_mutex);
-}
-
-static int idetape_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
- ide_drive_t *drive = tape->drive;
- int err;
-
- mutex_lock(&ide_tape_mutex);
- err = generic_ide_ioctl(drive, bdev, cmd, arg);
- if (err == -EINVAL)
- err = idetape_blkdev_ioctl(drive, cmd, arg);
- mutex_unlock(&ide_tape_mutex);
-
- return err;
-}
-
-static int idetape_compat_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- if (cmd == 0x0340 || cmd == 0x350)
- arg = (unsigned long)compat_ptr(arg);
-
- return idetape_ioctl(bdev, mode, cmd, arg);
-}
-
-static const struct block_device_operations idetape_block_ops = {
- .owner = THIS_MODULE,
- .open = idetape_open,
- .release = idetape_release,
- .ioctl = idetape_ioctl,
- .compat_ioctl = IS_ENABLED(CONFIG_COMPAT) ?
- idetape_compat_ioctl : NULL,
-};
-
-static int ide_tape_probe(ide_drive_t *drive)
-{
- idetape_tape_t *tape;
- struct gendisk *g;
- int minor;
-
- ide_debug_log(IDE_DBG_FUNC, "enter");
-
- if (!strstr(DRV_NAME, drive->driver_req))
- goto failed;
-
- if (drive->media != ide_tape)
- goto failed;
-
- if ((drive->dev_flags & IDE_DFLAG_ID_READ) &&
- ide_check_atapi_device(drive, DRV_NAME) == 0) {
- printk(KERN_ERR "ide-tape: %s: not supported by this version of"
- " the driver\n", drive->name);
- goto failed;
- }
- tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
- if (tape == NULL) {
- printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
- drive->name);
- goto failed;
- }
-
- g = alloc_disk(1 << PARTN_BITS);
- if (!g)
- goto out_free_tape;
-
- ide_init_disk(g, drive);
-
- tape->dev.parent = &drive->gendev;
- tape->dev.release = ide_tape_release;
- dev_set_name(&tape->dev, "%s", dev_name(&drive->gendev));
-
- if (device_register(&tape->dev))
- goto out_free_disk;
-
- tape->drive = drive;
- tape->driver = &idetape_driver;
- tape->disk = g;
-
- g->private_data = &tape->driver;
-
- drive->driver_data = tape;
-
- mutex_lock(&idetape_ref_mutex);
- for (minor = 0; idetape_devs[minor]; minor++)
- ;
- idetape_devs[minor] = tape;
- mutex_unlock(&idetape_ref_mutex);
-
- idetape_setup(drive, tape, minor);
-
- device_create(idetape_sysfs_class, &drive->gendev,
- MKDEV(IDETAPE_MAJOR, minor), NULL, "%s", tape->name);
- device_create(idetape_sysfs_class, &drive->gendev,
- MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
- "n%s", tape->name);
-
- g->fops = &idetape_block_ops;
-
- return 0;
-
-out_free_disk:
- put_disk(g);
-out_free_tape:
- kfree(tape);
-failed:
- return -ENODEV;
-}
-
-static void __exit idetape_exit(void)
-{
- driver_unregister(&idetape_driver.gen_driver);
- class_destroy(idetape_sysfs_class);
- unregister_chrdev(IDETAPE_MAJOR, "ht");
-}
-
-static int __init idetape_init(void)
-{
- int error = 1;
- idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");
- if (IS_ERR(idetape_sysfs_class)) {
- idetape_sysfs_class = NULL;
- printk(KERN_ERR "Unable to create sysfs class for ide tapes\n");
- error = -EBUSY;
- goto out;
- }
-
- if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
- printk(KERN_ERR "ide-tape: Failed to register chrdev"
- " interface\n");
- error = -EBUSY;
- goto out_free_class;
- }
-
- error = driver_register(&idetape_driver.gen_driver);
- if (error)
- goto out_free_chrdev;
-
- return 0;
-
-out_free_chrdev:
- unregister_chrdev(IDETAPE_MAJOR, "ht");
-out_free_class:
- class_destroy(idetape_sysfs_class);
-out:
- return error;
-}
-
-MODULE_ALIAS("ide:*m-tape*");
-module_init(idetape_init);
-module_exit(idetape_exit);
-MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR);
-MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
deleted file mode 100644
index 6665fc4724b9..000000000000
--- a/drivers/ide/ide-taskfile.c
+++ /dev/null
@@ -1,668 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2000-2002 Michael Cornwell <cornwell@....org>
- * Copyright (C) 2000-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2001-2002 Klaus Smolin
- * IBM Storage Technology Division
- * Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz
- *
- * The big the bad and the ugly.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/nmi.h>
-#include <linux/scatterlist.h>
-#include <linux/uaccess.h>
-
-#include <asm/io.h>
-
-void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
-
- /* Be sure we're looking at the low order bytes */
- tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
- tp_ops->tf_read(drive, &cmd->tf, cmd->valid.in.tf);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS);
-
- tp_ops->tf_read(drive, &cmd->hob, cmd->valid.in.hob);
- }
-}
-
-void ide_tf_dump(const char *s, struct ide_cmd *cmd)
-{
-#ifdef DEBUG
- printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x "
- "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n",
- s, cmd->tf.feature, cmd->tf.nsect,
- cmd->tf.lbal, cmd->tf.lbam, cmd->tf.lbah,
- cmd->tf.device, cmd->tf.command);
- printk("%s: hob: nsect 0x%02x lbal 0x%02x lbam 0x%02x lbah 0x%02x\n",
- s, cmd->hob.nsect, cmd->hob.lbal, cmd->hob.lbam, cmd->hob.lbah);
-#endif
-}
-
-int taskfile_lib_get_identify(ide_drive_t *drive, u8 *buf)
-{
- struct ide_cmd cmd;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf.nsect = 0x01;
- if (drive->media == ide_disk)
- cmd.tf.command = ATA_CMD_ID_ATA;
- else
- cmd.tf.command = ATA_CMD_ID_ATAPI;
- cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
- cmd.protocol = ATA_PROT_PIO;
-
- return ide_raw_taskfile(drive, &cmd, buf, 1);
-}
-
-static ide_startstop_t task_no_data_intr(ide_drive_t *);
-static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct ide_cmd *);
-static ide_startstop_t task_pio_intr(ide_drive_t *);
-
-ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_cmd *cmd = &hwif->cmd;
- struct ide_taskfile *tf = &cmd->tf;
- ide_handler_t *handler = NULL;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- const struct ide_dma_ops *dma_ops = hwif->dma_ops;
-
- if (orig_cmd->protocol == ATA_PROT_PIO &&
- (orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) &&
- drive->mult_count == 0) {
- pr_err("%s: multimode not set!\n", drive->name);
- return ide_stopped;
- }
-
- if (orig_cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
- orig_cmd->ftf_flags |= IDE_FTFLAG_SET_IN_FLAGS;
-
- memcpy(cmd, orig_cmd, sizeof(*cmd));
-
- if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
- ide_tf_dump(drive->name, cmd);
- tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
- if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) {
- u8 data[2] = { cmd->tf.data, cmd->hob.data };
-
- tp_ops->output_data(drive, cmd, data, 2);
- }
-
- if (cmd->valid.out.tf & IDE_VALID_DEVICE) {
- u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ?
- 0xE0 : 0xEF;
-
- if (!(cmd->ftf_flags & IDE_FTFLAG_FLAGGED))
- cmd->tf.device &= HIHI;
- cmd->tf.device |= drive->select;
- }
-
- tp_ops->tf_load(drive, &cmd->hob, cmd->valid.out.hob);
- tp_ops->tf_load(drive, &cmd->tf, cmd->valid.out.tf);
- }
-
- switch (cmd->protocol) {
- case ATA_PROT_PIO:
- if (cmd->tf_flags & IDE_TFLAG_WRITE) {
- tp_ops->exec_command(hwif, tf->command);
- ndelay(400); /* FIXME */
- return pre_task_out_intr(drive, cmd);
- }
- handler = task_pio_intr;
- fallthrough;
- case ATA_PROT_NODATA:
- if (handler == NULL)
- handler = task_no_data_intr;
- ide_execute_command(drive, cmd, handler, WAIT_WORSTCASE);
- return ide_started;
- case ATA_PROT_DMA:
- if (ide_dma_prepare(drive, cmd))
- return ide_stopped;
- hwif->expiry = dma_ops->dma_timer_expiry;
- ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD);
- dma_ops->dma_start(drive);
- fallthrough;
- default:
- return ide_started;
- }
-}
-EXPORT_SYMBOL_GPL(do_rw_taskfile);
-
-static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_cmd *cmd = &hwif->cmd;
- struct ide_taskfile *tf = &cmd->tf;
- int custom = (cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0;
- int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1;
- u8 stat;
-
- local_irq_enable_in_hardirq();
-
- while (1) {
- stat = hwif->tp_ops->read_status(hwif);
- if ((stat & ATA_BUSY) == 0 || retries-- == 0)
- break;
- udelay(10);
- };
-
- if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
- if (custom && tf->command == ATA_CMD_SET_MULTI) {
- drive->mult_req = drive->mult_count = 0;
- drive->special_flags |= IDE_SFLAG_RECALIBRATE;
- (void)ide_dump_status(drive, __func__, stat);
- return ide_stopped;
- } else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) {
- if ((stat & (ATA_ERR | ATA_DRQ)) == 0) {
- ide_set_handler(drive, &task_no_data_intr,
- WAIT_WORSTCASE);
- return ide_started;
- }
- }
- return ide_error(drive, "task_no_data_intr", stat);
- }
-
- if (custom && tf->command == ATA_CMD_SET_MULTI)
- drive->mult_count = drive->mult_req;
-
- if (custom == 0 || tf->command == ATA_CMD_IDLEIMMEDIATE ||
- tf->command == ATA_CMD_CHK_POWER) {
- struct request *rq = hwif->rq;
-
- if (ata_pm_request(rq))
- ide_complete_pm_rq(drive, rq);
- else
- ide_finish_cmd(drive, cmd, stat);
- }
-
- return ide_stopped;
-}
-
-static u8 wait_drive_not_busy(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- int retries;
- u8 stat;
-
- /*
- * Last sector was transferred, wait until device is ready. This can
- * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
- */
- for (retries = 0; retries < 1000; retries++) {
- stat = hwif->tp_ops->read_status(hwif);
-
- if (stat & ATA_BUSY)
- udelay(10);
- else
- break;
- }
-
- if (stat & ATA_BUSY)
- pr_err("%s: drive still BUSY!\n", drive->name);
-
- return stat;
-}
-
-void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd,
- unsigned int write, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct scatterlist *sg = hwif->sg_table;
- struct scatterlist *cursg = cmd->cursg;
- struct page *page;
- unsigned int offset;
- u8 *buf;
-
- if (cursg == NULL)
- cursg = cmd->cursg = sg;
-
- while (len) {
- unsigned nr_bytes = min(len, cursg->length - cmd->cursg_ofs);
-
- page = sg_page(cursg);
- offset = cursg->offset + cmd->cursg_ofs;
-
- /* get the current page and offset */
- page = nth_page(page, (offset >> PAGE_SHIFT));
- offset %= PAGE_SIZE;
-
- nr_bytes = min_t(unsigned, nr_bytes, (PAGE_SIZE - offset));
-
- buf = kmap_atomic(page) + offset;
-
- cmd->nleft -= nr_bytes;
- cmd->cursg_ofs += nr_bytes;
-
- if (cmd->cursg_ofs == cursg->length) {
- cursg = cmd->cursg = sg_next(cmd->cursg);
- cmd->cursg_ofs = 0;
- }
-
- /* do the actual data transfer */
- if (write)
- hwif->tp_ops->output_data(drive, cmd, buf, nr_bytes);
- else
- hwif->tp_ops->input_data(drive, cmd, buf, nr_bytes);
-
- kunmap_atomic(buf);
-
- len -= nr_bytes;
- }
-}
-EXPORT_SYMBOL_GPL(ide_pio_bytes);
-
-static void ide_pio_datablock(ide_drive_t *drive, struct ide_cmd *cmd,
- unsigned int write)
-{
- unsigned int nr_bytes;
-
- u8 saved_io_32bit = drive->io_32bit;
-
- if (cmd->tf_flags & IDE_TFLAG_FS)
- scsi_req(cmd->rq)->result = 0;
-
- if (cmd->tf_flags & IDE_TFLAG_IO_16BIT)
- drive->io_32bit = 0;
-
- touch_softlockup_watchdog();
-
- if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO)
- nr_bytes = min_t(unsigned, cmd->nleft, drive->mult_count << 9);
- else
- nr_bytes = SECTOR_SIZE;
-
- ide_pio_bytes(drive, cmd, write, nr_bytes);
-
- drive->io_32bit = saved_io_32bit;
-}
-
-static void ide_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- if (cmd->tf_flags & IDE_TFLAG_FS) {
- int nr_bytes = cmd->nbytes - cmd->nleft;
-
- if (cmd->protocol == ATA_PROT_PIO &&
- ((cmd->tf_flags & IDE_TFLAG_WRITE) || cmd->nleft == 0)) {
- if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO)
- nr_bytes -= drive->mult_count << 9;
- else
- nr_bytes -= SECTOR_SIZE;
- }
-
- if (nr_bytes > 0)
- ide_complete_rq(drive, BLK_STS_OK, nr_bytes);
- }
-}
-
-void ide_finish_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat)
-{
- struct request *rq = drive->hwif->rq;
- u8 err = ide_read_error(drive), nsect = cmd->tf.nsect;
- u8 set_xfer = !!(cmd->tf_flags & IDE_TFLAG_SET_XFER);
-
- ide_complete_cmd(drive, cmd, stat, err);
- scsi_req(rq)->result = err;
-
- if (err == 0 && set_xfer) {
- ide_set_xfer_rate(drive, nsect);
- ide_driveid_update(drive);
- }
-
- ide_complete_rq(drive, err ? BLK_STS_IOERR : BLK_STS_OK, blk_rq_bytes(rq));
-}
-
-/*
- * Handler for command with PIO data phase.
- */
-static ide_startstop_t task_pio_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_cmd *cmd = &drive->hwif->cmd;
- u8 stat = hwif->tp_ops->read_status(hwif);
- u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
-
- if (write == 0) {
- /* Error? */
- if (stat & ATA_ERR)
- goto out_err;
-
- /* Didn't want any data? Odd. */
- if ((stat & ATA_DRQ) == 0) {
- /* Command all done? */
- if (OK_STAT(stat, ATA_DRDY, ATA_BUSY))
- goto out_end;
-
- /* Assume it was a spurious irq */
- goto out_wait;
- }
- } else {
- if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat))
- goto out_err;
-
- /* Deal with unexpected ATA data phase. */
- if (((stat & ATA_DRQ) == 0) ^ (cmd->nleft == 0))
- goto out_err;
- }
-
- if (write && cmd->nleft == 0)
- goto out_end;
-
- /* Still data left to transfer. */
- ide_pio_datablock(drive, cmd, write);
-
- /* Are we done? Check status and finish transfer. */
- if (write == 0 && cmd->nleft == 0) {
- stat = wait_drive_not_busy(drive);
- if (!OK_STAT(stat, 0, BAD_STAT))
- goto out_err;
-
- goto out_end;
- }
-out_wait:
- /* Still data left to transfer. */
- ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE);
- return ide_started;
-out_end:
- if ((cmd->tf_flags & IDE_TFLAG_FS) == 0)
- ide_finish_cmd(drive, cmd, stat);
- else
- ide_complete_rq(drive, BLK_STS_OK, blk_rq_sectors(cmd->rq) << 9);
- return ide_stopped;
-out_err:
- ide_error_cmd(drive, cmd);
- return ide_error(drive, __func__, stat);
-}
-
-static ide_startstop_t pre_task_out_intr(ide_drive_t *drive,
- struct ide_cmd *cmd)
-{
- ide_startstop_t startstop;
-
- if (ide_wait_stat(&startstop, drive, ATA_DRQ,
- drive->bad_wstat, WAIT_DRQ)) {
- pr_err("%s: no DRQ after issuing %sWRITE%s\n", drive->name,
- (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "",
- (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : "");
- return startstop;
- }
-
- if (!force_irqthreads && (drive->dev_flags & IDE_DFLAG_UNMASK) == 0)
- local_irq_disable();
-
- ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE);
-
- ide_pio_datablock(drive, cmd, 1);
-
- return ide_started;
-}
-
-int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf,
- u16 nsect)
-{
- struct request *rq;
- int error;
-
- rq = blk_get_request(drive->queue,
- (cmd->tf_flags & IDE_TFLAG_WRITE) ?
- REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0);
- ide_req(rq)->type = ATA_PRIV_TASKFILE;
-
- /*
- * (ks) We transfer currently only whole sectors.
- * This is suffient for now. But, it would be great,
- * if we would find a solution to transfer any size.
- * To support special commands like READ LONG.
- */
- if (nsect) {
- error = blk_rq_map_kern(drive->queue, rq, buf,
- nsect * SECTOR_SIZE, GFP_NOIO);
- if (error)
- goto put_req;
- }
-
- ide_req(rq)->special = cmd;
- cmd->rq = rq;
-
- blk_execute_rq(NULL, rq, 0);
- error = scsi_req(rq)->result ? -EIO : 0;
-put_req:
- blk_put_request(rq);
- return error;
-}
-EXPORT_SYMBOL(ide_raw_taskfile);
-
-int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- cmd->protocol = ATA_PROT_NODATA;
-
- return ide_raw_taskfile(drive, cmd, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(ide_no_data_taskfile);
-
-#ifdef CONFIG_IDE_TASK_IOCTL
-int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg)
-{
- ide_task_request_t *req_task;
- struct ide_cmd cmd;
- u8 *outbuf = NULL;
- u8 *inbuf = NULL;
- u8 *data_buf = NULL;
- int err = 0;
- int tasksize = sizeof(struct ide_task_request_s);
- unsigned int taskin = 0;
- unsigned int taskout = 0;
- u16 nsect = 0;
- char __user *buf = (char __user *)arg;
-
- req_task = memdup_user(buf, tasksize);
- if (IS_ERR(req_task))
- return PTR_ERR(req_task);
-
- taskout = req_task->out_size;
- taskin = req_task->in_size;
-
- if (taskin > 65536 || taskout > 65536) {
- err = -EINVAL;
- goto abort;
- }
-
- if (taskout) {
- int outtotal = tasksize;
- outbuf = kzalloc(taskout, GFP_KERNEL);
- if (outbuf == NULL) {
- err = -ENOMEM;
- goto abort;
- }
- if (copy_from_user(outbuf, buf + outtotal, taskout)) {
- err = -EFAULT;
- goto abort;
- }
- }
-
- if (taskin) {
- int intotal = tasksize + taskout;
- inbuf = kzalloc(taskin, GFP_KERNEL);
- if (inbuf == NULL) {
- err = -ENOMEM;
- goto abort;
- }
- if (copy_from_user(inbuf, buf + intotal, taskin)) {
- err = -EFAULT;
- goto abort;
- }
- }
-
- memset(&cmd, 0, sizeof(cmd));
-
- memcpy(&cmd.hob, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2);
- memcpy(&cmd.tf, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE);
-
- cmd.valid.out.tf = IDE_VALID_DEVICE;
- cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF;
- cmd.tf_flags = IDE_TFLAG_IO_16BIT;
-
- if (drive->dev_flags & IDE_DFLAG_LBA48) {
- cmd.tf_flags |= IDE_TFLAG_LBA48;
- cmd.valid.in.hob = IDE_VALID_IN_HOB;
- }
-
- if (req_task->out_flags.all) {
- cmd.ftf_flags |= IDE_FTFLAG_FLAGGED;
-
- if (req_task->out_flags.b.data)
- cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA;
-
- if (req_task->out_flags.b.nsector_hob)
- cmd.valid.out.hob |= IDE_VALID_NSECT;
- if (req_task->out_flags.b.sector_hob)
- cmd.valid.out.hob |= IDE_VALID_LBAL;
- if (req_task->out_flags.b.lcyl_hob)
- cmd.valid.out.hob |= IDE_VALID_LBAM;
- if (req_task->out_flags.b.hcyl_hob)
- cmd.valid.out.hob |= IDE_VALID_LBAH;
-
- if (req_task->out_flags.b.error_feature)
- cmd.valid.out.tf |= IDE_VALID_FEATURE;
- if (req_task->out_flags.b.nsector)
- cmd.valid.out.tf |= IDE_VALID_NSECT;
- if (req_task->out_flags.b.sector)
- cmd.valid.out.tf |= IDE_VALID_LBAL;
- if (req_task->out_flags.b.lcyl)
- cmd.valid.out.tf |= IDE_VALID_LBAM;
- if (req_task->out_flags.b.hcyl)
- cmd.valid.out.tf |= IDE_VALID_LBAH;
- } else {
- cmd.valid.out.tf |= IDE_VALID_OUT_TF;
- if (cmd.tf_flags & IDE_TFLAG_LBA48)
- cmd.valid.out.hob |= IDE_VALID_OUT_HOB;
- }
-
- if (req_task->in_flags.b.data)
- cmd.ftf_flags |= IDE_FTFLAG_IN_DATA;
-
- if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) {
- /* fixup data phase if needed */
- if (req_task->data_phase == TASKFILE_IN_DMAQ ||
- req_task->data_phase == TASKFILE_IN_DMA)
- cmd.tf_flags |= IDE_TFLAG_WRITE;
- }
-
- cmd.protocol = ATA_PROT_DMA;
-
- switch (req_task->data_phase) {
- case TASKFILE_MULTI_OUT:
- if (!drive->mult_count) {
- /* (hs): give up if multcount is not set */
- pr_err("%s: %s Multimode Write multcount is not set\n",
- drive->name, __func__);
- err = -EPERM;
- goto abort;
- }
- cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
- fallthrough;
- case TASKFILE_OUT:
- cmd.protocol = ATA_PROT_PIO;
- fallthrough;
- case TASKFILE_OUT_DMAQ:
- case TASKFILE_OUT_DMA:
- cmd.tf_flags |= IDE_TFLAG_WRITE;
- nsect = taskout / SECTOR_SIZE;
- data_buf = outbuf;
- break;
- case TASKFILE_MULTI_IN:
- if (!drive->mult_count) {
- /* (hs): give up if multcount is not set */
- pr_err("%s: %s Multimode Read multcount is not set\n",
- drive->name, __func__);
- err = -EPERM;
- goto abort;
- }
- cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
- fallthrough;
- case TASKFILE_IN:
- cmd.protocol = ATA_PROT_PIO;
- fallthrough;
- case TASKFILE_IN_DMAQ:
- case TASKFILE_IN_DMA:
- nsect = taskin / SECTOR_SIZE;
- data_buf = inbuf;
- break;
- case TASKFILE_NO_DATA:
- cmd.protocol = ATA_PROT_NODATA;
- break;
- default:
- err = -EFAULT;
- goto abort;
- }
-
- if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA)
- nsect = 0;
- else if (!nsect) {
- nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect;
-
- if (!nsect) {
- pr_err("%s: in/out command without data\n",
- drive->name);
- err = -EFAULT;
- goto abort;
- }
- }
-
- err = ide_raw_taskfile(drive, &cmd, data_buf, nsect);
-
- memcpy(req_task->hob_ports, &cmd.hob, HDIO_DRIVE_HOB_HDR_SIZE - 2);
- memcpy(req_task->io_ports, &cmd.tf, HDIO_DRIVE_TASK_HDR_SIZE);
-
- if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) &&
- req_task->in_flags.all == 0) {
- req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
- if (drive->dev_flags & IDE_DFLAG_LBA48)
- req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8);
- }
-
- if (copy_to_user(buf, req_task, tasksize)) {
- err = -EFAULT;
- goto abort;
- }
- if (taskout) {
- int outtotal = tasksize;
- if (copy_to_user(buf + outtotal, outbuf, taskout)) {
- err = -EFAULT;
- goto abort;
- }
- }
- if (taskin) {
- int intotal = tasksize + taskout;
- if (copy_to_user(buf + intotal, inbuf, taskin)) {
- err = -EFAULT;
- goto abort;
- }
- }
-abort:
- kfree(req_task);
- kfree(outbuf);
- kfree(inbuf);
-
- return err;
-}
-#endif
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
deleted file mode 100644
index cfe78df74b7d..000000000000
--- a/drivers/ide/ide-timings.c
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 1999-2001 Vojtech Pavlik
- * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@....cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/module.h>
-
-/*
- * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
- * These were taken from ATA/ATAPI-6 standard, rev 0a, except
- * for PIO 5, which is a nonstandard extension and UDMA6, which
- * is currently supported only by Maxtor drives.
- */
-
-static struct ide_timing ide_timing[] = {
-
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
-
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
-
- { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
- { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 },
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
-
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
-
- { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
- { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
-
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
-
- { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 },
-
- { 0xff }
-};
-
-struct ide_timing *ide_timing_find_mode(u8 speed)
-{
- struct ide_timing *t;
-
- for (t = ide_timing; t->mode != speed; t++)
- if (t->mode == 0xff)
- return NULL;
- return t;
-}
-EXPORT_SYMBOL_GPL(ide_timing_find_mode);
-
-u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
-{
- u16 *id = drive->id;
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- u16 cycle = 0;
-
- if (id[ATA_ID_FIELD_VALID] & 2) {
- if (ata_id_has_iordy(drive->id))
- cycle = id[ATA_ID_EIDE_PIO_IORDY];
- else
- cycle = id[ATA_ID_EIDE_PIO];
-
- /* conservative "downgrade" for all pre-ATA2 drives */
- if (pio < 3 && cycle < t->cycle)
- cycle = 0; /* use standard timing */
-
- /* Use the standard timing for the CF specific modes too */
- if (pio > 4 && ata_id_is_cfa(id))
- cycle = 0;
- }
-
- return cycle ? cycle : t->cycle;
-}
-EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
-
-#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1)
-#define EZ(v, unit) ((v) ? ENOUGH((v) * 1000, unit) : 0)
-
-static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q,
- int T, int UT)
-{
- q->setup = EZ(t->setup, T);
- q->act8b = EZ(t->act8b, T);
- q->rec8b = EZ(t->rec8b, T);
- q->cyc8b = EZ(t->cyc8b, T);
- q->active = EZ(t->active, T);
- q->recover = EZ(t->recover, T);
- q->cycle = EZ(t->cycle, T);
- q->udma = EZ(t->udma, UT);
-}
-
-void ide_timing_merge(struct ide_timing *a, struct ide_timing *b,
- struct ide_timing *m, unsigned int what)
-{
- if (what & IDE_TIMING_SETUP)
- m->setup = max(a->setup, b->setup);
- if (what & IDE_TIMING_ACT8B)
- m->act8b = max(a->act8b, b->act8b);
- if (what & IDE_TIMING_REC8B)
- m->rec8b = max(a->rec8b, b->rec8b);
- if (what & IDE_TIMING_CYC8B)
- m->cyc8b = max(a->cyc8b, b->cyc8b);
- if (what & IDE_TIMING_ACTIVE)
- m->active = max(a->active, b->active);
- if (what & IDE_TIMING_RECOVER)
- m->recover = max(a->recover, b->recover);
- if (what & IDE_TIMING_CYCLE)
- m->cycle = max(a->cycle, b->cycle);
- if (what & IDE_TIMING_UDMA)
- m->udma = max(a->udma, b->udma);
-}
-EXPORT_SYMBOL_GPL(ide_timing_merge);
-
-int ide_timing_compute(ide_drive_t *drive, u8 speed,
- struct ide_timing *t, int T, int UT)
-{
- u16 *id = drive->id;
- struct ide_timing *s, p;
-
- /*
- * Find the mode.
- */
- s = ide_timing_find_mode(speed);
- if (s == NULL)
- return -EINVAL;
-
- /*
- * Copy the timing from the table.
- */
- *t = *s;
-
- /*
- * If the drive is an EIDE drive, it can tell us it needs extended
- * PIO/MWDMA cycle timing.
- */
- if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
- memset(&p, 0, sizeof(p));
-
- if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
- if (speed <= XFER_PIO_2)
- p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
- else if ((speed <= XFER_PIO_4) ||
- (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
- p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
- } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- p.cycle = id[ATA_ID_EIDE_DMA_MIN];
-
- ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
- }
-
- /*
- * Convert the timing to bus clock counts.
- */
- ide_timing_quantize(t, t, T, UT);
-
- /*
- * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
- * S.M.A.R.T and some other commands. We have to ensure that the
- * DMA cycle timing is slower/equal than the current PIO timing.
- */
- if (speed >= XFER_SW_DMA_0) {
- ide_timing_compute(drive, drive->pio_mode, &p, T, UT);
- ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
- }
-
- /*
- * Lengthen active & recovery time so that cycle time is correct.
- */
- if (t->act8b + t->rec8b < t->cyc8b) {
- t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
- t->rec8b = t->cyc8b - t->act8b;
- }
-
- if (t->active + t->recover < t->cycle) {
- t->active += (t->cycle - (t->active + t->recover)) / 2;
- t->recover = t->cycle - t->active;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_timing_compute);
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
deleted file mode 100644
index 0b9709b489b7..000000000000
--- a/drivers/ide/ide-xfer-mode.c
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/ide.h>
-#include <linux/bitops.h>
-
-static const char *udma_str[] =
- { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44",
- "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
-static const char *mwdma_str[] =
- { "MWDMA0", "MWDMA1", "MWDMA2", "MWDMA3", "MWDMA4" };
-static const char *swdma_str[] =
- { "SWDMA0", "SWDMA1", "SWDMA2" };
-static const char *pio_str[] =
- { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5", "PIO6" };
-
-/**
- * ide_xfer_verbose - return IDE mode names
- * @mode: transfer mode
- *
- * Returns a constant string giving the name of the mode
- * requested.
- */
-
-const char *ide_xfer_verbose(u8 mode)
-{
- const char *s;
- u8 i = mode & 0xf;
-
- if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
- s = udma_str[i];
- else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_4)
- s = mwdma_str[i];
- else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
- s = swdma_str[i];
- else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_6)
- s = pio_str[i & 0x7];
- else if (mode == XFER_PIO_SLOW)
- s = "PIO SLOW";
- else
- s = "XFER ERROR";
-
- return s;
-}
-EXPORT_SYMBOL(ide_xfer_verbose);
-
-/**
- * ide_get_best_pio_mode - get PIO mode from drive
- * @drive: drive to consider
- * @mode_wanted: preferred mode
- * @max_mode: highest allowed mode
- *
- * This routine returns the recommended PIO settings for a given drive,
- * based on the drive->id information and the ide_pio_blacklist[].
- *
- * Drive PIO mode is auto-selected if 255 is passed as mode_wanted.
- * This is used by most chipset support modules when "auto-tuning".
- */
-
-static u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
-{
- u16 *id = drive->id;
- int pio_mode = -1, overridden = 0;
-
- if (mode_wanted != 255)
- return min_t(u8, mode_wanted, max_mode);
-
- if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0)
- pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]);
-
- if (pio_mode != -1) {
- printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
- } else {
- pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8;
- if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
- pio_mode = 2;
- overridden = 1;
- }
-
- if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */
- if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 7))
- pio_mode = 4 + min_t(int, 2,
- id[ATA_ID_CFA_MODES] & 7);
- else if (ata_id_has_iordy(id)) {
- if (id[ATA_ID_PIO_MODES] & 7) {
- overridden = 0;
- if (id[ATA_ID_PIO_MODES] & 4)
- pio_mode = 5;
- else if (id[ATA_ID_PIO_MODES] & 2)
- pio_mode = 4;
- else
- pio_mode = 3;
- }
- }
- }
-
- if (overridden)
- printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
- drive->name);
- }
-
- if (pio_mode > max_mode)
- pio_mode = max_mode;
-
- return pio_mode;
-}
-
-int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio)
-{
- /*
- * IORDY may lead to controller lock up on certain controllers
- * if the port is not occupied.
- */
- if (pio == 0 && (drive->hwif->port_flags & IDE_PFLAG_PROBING))
- return 0;
- return ata_id_pio_need_iordy(drive->id, pio);
-}
-EXPORT_SYMBOL_GPL(ide_pio_need_iordy);
-
-int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
- return 0;
-
- if (port_ops == NULL || port_ops->set_pio_mode == NULL)
- return -1;
-
- /*
- * TODO: temporary hack for some legacy host drivers that didn't
- * set transfer mode on the device in ->set_pio_mode method...
- */
- if (port_ops->set_dma_mode == NULL) {
- drive->pio_mode = mode;
- port_ops->set_pio_mode(hwif, drive);
- return 0;
- }
-
- if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
- if (ide_config_drive_speed(drive, mode))
- return -1;
- drive->pio_mode = mode;
- port_ops->set_pio_mode(hwif, drive);
- return 0;
- } else {
- drive->pio_mode = mode;
- port_ops->set_pio_mode(hwif, drive);
- return ide_config_drive_speed(drive, mode);
- }
-}
-
-int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
- return 0;
-
- if (port_ops == NULL || port_ops->set_dma_mode == NULL)
- return -1;
-
- if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
- if (ide_config_drive_speed(drive, mode))
- return -1;
- drive->dma_mode = mode;
- port_ops->set_dma_mode(hwif, drive);
- return 0;
- } else {
- drive->dma_mode = mode;
- port_ops->set_dma_mode(hwif, drive);
- return ide_config_drive_speed(drive, mode);
- }
-}
-EXPORT_SYMBOL_GPL(ide_set_dma_mode);
-
-/* req_pio == "255" for auto-tune */
-void ide_set_pio(ide_drive_t *drive, u8 req_pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- u8 host_pio, pio;
-
- if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
- (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
- return;
-
- BUG_ON(hwif->pio_mask == 0x00);
-
- host_pio = fls(hwif->pio_mask) - 1;
-
- pio = ide_get_best_pio_mode(drive, req_pio, host_pio);
-
- /*
- * TODO:
- * - report device max PIO mode
- * - check req_pio != 255 against device max PIO mode
- */
- printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
- drive->name, host_pio, req_pio,
- req_pio == 255 ? "(auto-tune)" : "", pio);
-
- (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
-}
-EXPORT_SYMBOL_GPL(ide_set_pio);
-
-/**
- * ide_rate_filter - filter transfer mode
- * @drive: IDE device
- * @speed: desired speed
- *
- * Given the available transfer modes this function returns
- * the best available speed at or below the speed requested.
- *
- * TODO: check device PIO capabilities
- */
-
-static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 mode = ide_find_dma_mode(drive, speed);
-
- if (mode == 0) {
- if (hwif->pio_mask)
- mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0;
- else
- mode = XFER_PIO_4;
- }
-
-/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */
-
- return min(speed, mode);
-}
-
-/**
- * ide_set_xfer_rate - set transfer rate
- * @drive: drive to set
- * @rate: speed to attempt to set
- *
- * General helper for setting the speed of an IDE device. This
- * function knows about user enforced limits from the configuration
- * which ->set_pio_mode/->set_dma_mode does not.
- */
-
-int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (port_ops == NULL || port_ops->set_dma_mode == NULL ||
- (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
- return -1;
-
- rate = ide_rate_filter(drive, rate);
-
- BUG_ON(rate < XFER_PIO_0);
-
- if (rate >= XFER_PIO_0 && rate <= XFER_PIO_6)
- return ide_set_pio_mode(drive, rate);
-
- return ide_set_dma_mode(drive, rate);
-}
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
deleted file mode 100644
index 9a9c64fd1032..000000000000
--- a/drivers/ide/ide.c
+++ /dev/null
@@ -1,415 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
- * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
- */
-
-/*
- * Mostly written by Mark Lord <mlord@...ox.com>
- * and Gadi Oxman <gadio@...vision.net.il>
- * and Andre Hedrick <andre@...ux-ide.org>
- *
- * See linux/MAINTAINERS for address of current maintainer.
- *
- * This is the multiple IDE interface driver, as evolved from hd.c.
- * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
- * (usually 14 & 15).
- * There can be up to two drives per interface, as per the ATA-2 spec.
- *
- * ...
- *
- * From hd.c:
- * |
- * | It traverses the request-list, using interrupts to jump between functions.
- * | As nearly all functions can be called within interrupts, we may not sleep.
- * | Special care is recommended. Have Fun!
- * |
- * | modified by Drew Eckhardt to check nr of hd's from the CMOS.
- * |
- * | Thanks to Branko Lankester, lankeste@....uva.nl, who found a bug
- * | in the early extended-partition checks and added DM partitions.
- * |
- * | Early work on error handling by Mika Liljeberg (liljeber@...Helsinki.FI).
- * |
- * | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
- * | and general streamlining by Mark Lord (mlord@...ox.com).
- *
- * October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
- *
- * Mark Lord (mlord@...ox.com) (IDE Perf.Pkg)
- * Delman Lee (delman@...e.org) ("Mr. atdisk2")
- * Scott Snyder (snyder@...ld0.fnal.gov) (ATAPI IDE cd-rom)
- *
- * This was a rewrite of just about everything from hd.c, though some original
- * code is still sprinkled about. Think of it as a major evolution, with
- * inspiration from lots of linux users, esp. hamish@....apana.org.au
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/hdreg.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-
-struct class *ide_port_class;
-
-/**
- * ide_device_get - get an additional reference to a ide_drive_t
- * @drive: device to get a reference to
- *
- * Gets a reference to the ide_drive_t and increments the use count of the
- * underlying LLDD module.
- */
-int ide_device_get(ide_drive_t *drive)
-{
- struct device *host_dev;
- struct module *module;
-
- if (!get_device(&drive->gendev))
- return -ENXIO;
-
- host_dev = drive->hwif->host->dev[0];
- module = host_dev ? host_dev->driver->owner : NULL;
-
- if (module && !try_module_get(module)) {
- put_device(&drive->gendev);
- return -ENXIO;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_device_get);
-
-/**
- * ide_device_put - release a reference to a ide_drive_t
- * @drive: device to release a reference on
- *
- * Release a reference to the ide_drive_t and decrements the use count of
- * the underlying LLDD module.
- */
-void ide_device_put(ide_drive_t *drive)
-{
-#ifdef CONFIG_MODULE_UNLOAD
- struct device *host_dev = drive->hwif->host->dev[0];
- struct module *module = host_dev ? host_dev->driver->owner : NULL;
-
- module_put(module);
-#endif
- put_device(&drive->gendev);
-}
-EXPORT_SYMBOL_GPL(ide_device_put);
-
-static int ide_bus_match(struct device *dev, struct device_driver *drv)
-{
- return 1;
-}
-
-static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- ide_drive_t *drive = to_ide_device(dev);
-
- add_uevent_var(env, "MEDIA=%s", ide_media_string(drive));
- add_uevent_var(env, "DRIVENAME=%s", drive->name);
- add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive));
- return 0;
-}
-
-static int generic_ide_probe(struct device *dev)
-{
- ide_drive_t *drive = to_ide_device(dev);
- struct ide_driver *drv = to_ide_driver(dev->driver);
-
- return drv->probe ? drv->probe(drive) : -ENODEV;
-}
-
-static int generic_ide_remove(struct device *dev)
-{
- ide_drive_t *drive = to_ide_device(dev);
- struct ide_driver *drv = to_ide_driver(dev->driver);
-
- if (drv->remove)
- drv->remove(drive);
-
- return 0;
-}
-
-static void generic_ide_shutdown(struct device *dev)
-{
- ide_drive_t *drive = to_ide_device(dev);
- struct ide_driver *drv = to_ide_driver(dev->driver);
-
- if (dev->driver && drv->shutdown)
- drv->shutdown(drive);
-}
-
-struct bus_type ide_bus_type = {
- .name = "ide",
- .match = ide_bus_match,
- .uevent = ide_uevent,
- .probe = generic_ide_probe,
- .remove = generic_ide_remove,
- .shutdown = generic_ide_shutdown,
- .dev_groups = ide_dev_groups,
- .suspend = generic_ide_suspend,
- .resume = generic_ide_resume,
-};
-
-EXPORT_SYMBOL_GPL(ide_bus_type);
-
-int ide_vlb_clk;
-EXPORT_SYMBOL_GPL(ide_vlb_clk);
-
-module_param_named(vlb_clock, ide_vlb_clk, int, 0);
-MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)");
-
-int ide_pci_clk;
-EXPORT_SYMBOL_GPL(ide_pci_clk);
-
-module_param_named(pci_clock, ide_pci_clk, int, 0);
-MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)");
-
-static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp)
-{
- unsigned int a, b, i, j = 1;
- unsigned int *dev_param_mask = (unsigned int *)kp->arg;
-
- /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
- if (sscanf(s, "%u.%u:%u", &a, &b, &j) != 3 &&
- sscanf(s, "%u.%u", &a, &b) != 2)
- return -EINVAL;
-
- i = a * MAX_DRIVES + b;
-
- if (i >= MAX_HWIFS * MAX_DRIVES || j > 1)
- return -EINVAL;
-
- if (j)
- *dev_param_mask |= (1 << i);
- else
- *dev_param_mask &= ~(1 << i);
-
- return 0;
-}
-
-static const struct kernel_param_ops param_ops_ide_dev_mask = {
- .set = ide_set_dev_param_mask
-};
-
-#define param_check_ide_dev_mask(name, p) param_check_uint(name, p)
-
-static unsigned int ide_nodma;
-
-module_param_named(nodma, ide_nodma, ide_dev_mask, 0);
-MODULE_PARM_DESC(nodma, "disallow DMA for a device");
-
-static unsigned int ide_noflush;
-
-module_param_named(noflush, ide_noflush, ide_dev_mask, 0);
-MODULE_PARM_DESC(noflush, "disable flush requests for a device");
-
-static unsigned int ide_nohpa;
-
-module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0);
-MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
-
-static unsigned int ide_noprobe;
-
-module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0);
-MODULE_PARM_DESC(noprobe, "skip probing for a device");
-
-static unsigned int ide_nowerr;
-
-module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0);
-MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");
-
-static unsigned int ide_cdroms;
-
-module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0);
-MODULE_PARM_DESC(cdrom, "force device as a CD-ROM");
-
-struct chs_geom {
- unsigned int cyl;
- u8 head;
- u8 sect;
-};
-
-static unsigned int ide_disks;
-static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES];
-
-static int ide_set_disk_chs(const char *str, const struct kernel_param *kp)
-{
- unsigned int a, b, c = 0, h = 0, s = 0, i, j = 1;
-
- /* controller . device (0 or 1) : Cylinders , Heads , Sectors */
- /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
- if (sscanf(str, "%u.%u:%u,%u,%u", &a, &b, &c, &h, &s) != 5 &&
- sscanf(str, "%u.%u:%u", &a, &b, &j) != 3)
- return -EINVAL;
-
- i = a * MAX_DRIVES + b;
-
- if (i >= MAX_HWIFS * MAX_DRIVES || j > 1)
- return -EINVAL;
-
- if (c > INT_MAX || h > 255 || s > 255)
- return -EINVAL;
-
- if (j)
- ide_disks |= (1 << i);
- else
- ide_disks &= ~(1 << i);
-
- ide_disks_chs[i].cyl = c;
- ide_disks_chs[i].head = h;
- ide_disks_chs[i].sect = s;
-
- return 0;
-}
-
-module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0);
-MODULE_PARM_DESC(chs, "force device as a disk (using CHS)");
-
-static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
-{
- int i = drive->hwif->index * MAX_DRIVES + unit;
-
- if (ide_nodma & (1 << i)) {
- printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name);
- drive->dev_flags |= IDE_DFLAG_NODMA;
- }
- if (ide_noflush & (1 << i)) {
- printk(KERN_INFO "ide: disabling flush requests for %s\n",
- drive->name);
- drive->dev_flags |= IDE_DFLAG_NOFLUSH;
- }
- if (ide_nohpa & (1 << i)) {
- printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
- drive->name);
- drive->dev_flags |= IDE_DFLAG_NOHPA;
- }
- if (ide_noprobe & (1 << i)) {
- printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
- drive->dev_flags |= IDE_DFLAG_NOPROBE;
- }
- if (ide_nowerr & (1 << i)) {
- printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
- drive->name);
- drive->bad_wstat = BAD_R_STAT;
- }
- if (ide_cdroms & (1 << i)) {
- printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name);
- drive->dev_flags |= IDE_DFLAG_PRESENT;
- drive->media = ide_cdrom;
- /* an ATAPI device ignores DRDY */
- drive->ready_stat = 0;
- }
- if (ide_disks & (1 << i)) {
- drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl;
- drive->head = drive->bios_head = ide_disks_chs[i].head;
- drive->sect = drive->bios_sect = ide_disks_chs[i].sect;
-
- printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n",
- drive->name,
- drive->cyl, drive->head, drive->sect);
-
- drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT;
- drive->media = ide_disk;
- drive->ready_stat = ATA_DRDY;
- }
-}
-
-static unsigned int ide_ignore_cable;
-
-static int ide_set_ignore_cable(const char *s, const struct kernel_param *kp)
-{
- int i, j = 1;
-
- /* controller (ignore) */
- /* controller : 1 (ignore) | 0 (use) */
- if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
- return -EINVAL;
-
- if (i >= MAX_HWIFS || j < 0 || j > 1)
- return -EINVAL;
-
- if (j)
- ide_ignore_cable |= (1 << i);
- else
- ide_ignore_cable &= ~(1 << i);
-
- return 0;
-}
-
-module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0);
-MODULE_PARM_DESC(ignore_cable, "ignore cable detection");
-
-void ide_port_apply_params(ide_hwif_t *hwif)
-{
- ide_drive_t *drive;
- int i;
-
- if (ide_ignore_cable & (1 << hwif->index)) {
- printk(KERN_INFO "ide: ignoring cable detection for %s\n",
- hwif->name);
- hwif->cbl = ATA_CBL_PATA40_SHORT;
- }
-
- ide_port_for_each_dev(i, drive, hwif)
- ide_dev_apply_params(drive, i);
-}
-
-/*
- * This is gets invoked once during initialization, to set *everything* up
- */
-static int __init ide_init(void)
-{
- int ret;
-
- printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
-
- ret = bus_register(&ide_bus_type);
- if (ret < 0) {
- printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
- return ret;
- }
-
- ide_port_class = class_create(THIS_MODULE, "ide_port");
- if (IS_ERR(ide_port_class)) {
- ret = PTR_ERR(ide_port_class);
- goto out_port_class;
- }
-
- ide_acpi_init();
-
- proc_ide_create();
-
- return 0;
-
-out_port_class:
- bus_unregister(&ide_bus_type);
-
- return ret;
-}
-
-static void __exit ide_exit(void)
-{
- proc_ide_destroy();
-
- class_destroy(ide_port_class);
-
- bus_unregister(&ide_bus_type);
-}
-
-module_init(ide_init);
-module_exit(ide_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
deleted file mode 100644
index 91639fd6c276..000000000000
--- a/drivers/ide/ide_platform.c
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Platform IDE driver
- *
- * Copyright (C) 2007 MontaVista Software
- *
- * Maintainer: Kumar Gala <galak@...nel.crashing.org>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/ata_platform.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-static void plat_ide_setup_ports(struct ide_hw *hw, void __iomem *base,
- void __iomem *ctrl,
- struct pata_platform_info *pdata, int irq)
-{
- unsigned long port = (unsigned long)base;
- int i;
-
- hw->io_ports.data_addr = port;
-
- port += (1 << pdata->ioport_shift);
- for (i = 1; i <= 7;
- i++, port += (1 << pdata->ioport_shift))
- hw->io_ports_array[i] = port;
-
- hw->io_ports.ctl_addr = (unsigned long)ctrl;
-
- hw->irq = irq;
-}
-
-static const struct ide_port_info platform_ide_port_info = {
- .host_flags = IDE_HFLAG_NO_DMA,
- .chipset = ide_generic,
-};
-
-static int plat_ide_probe(struct platform_device *pdev)
-{
- struct resource *res_base, *res_alt, *res_irq;
- void __iomem *base, *alt_base;
- struct pata_platform_info *pdata;
- struct ide_host *host;
- int ret = 0, mmio = 0;
- struct ide_hw hw, *hws[] = { &hw };
- struct ide_port_info d = platform_ide_port_info;
-
- pdata = dev_get_platdata(&pdev->dev);
-
- /* get a pointer to the register memory */
- res_base = platform_get_resource(pdev, IORESOURCE_IO, 0);
- res_alt = platform_get_resource(pdev, IORESOURCE_IO, 1);
-
- if (!res_base || !res_alt) {
- res_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- res_alt = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res_base || !res_alt) {
- ret = -ENOMEM;
- goto out;
- }
- mmio = 1;
- }
-
- res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res_irq) {
- ret = -EINVAL;
- goto out;
- }
-
- if (mmio) {
- base = devm_ioremap(&pdev->dev,
- res_base->start, resource_size(res_base));
- alt_base = devm_ioremap(&pdev->dev,
- res_alt->start, resource_size(res_alt));
- } else {
- base = devm_ioport_map(&pdev->dev,
- res_base->start, resource_size(res_base));
- alt_base = devm_ioport_map(&pdev->dev,
- res_alt->start, resource_size(res_alt));
- }
-
- memset(&hw, 0, sizeof(hw));
- plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
- hw.dev = &pdev->dev;
-
- d.irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
- if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
- d.irq_flags |= IRQF_SHARED;
-
- if (mmio)
- d.host_flags |= IDE_HFLAG_MMIO;
-
- ret = ide_host_add(&d, hws, 1, &host);
- if (ret)
- goto out;
-
- platform_set_drvdata(pdev, host);
-
- return 0;
-
-out:
- return ret;
-}
-
-static int plat_ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = dev_get_drvdata(&pdev->dev);
-
- ide_host_remove(host);
-
- return 0;
-}
-
-static struct platform_driver platform_ide_driver = {
- .driver = {
- .name = "pata_platform",
- },
- .probe = plat_ide_probe,
- .remove = plat_ide_remove,
-};
-
-module_platform_driver(platform_ide_driver);
-
-MODULE_DESCRIPTION("Platform IDE driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pata_platform");
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
deleted file mode 100644
index b6f674ab4fb7..000000000000
--- a/drivers/ide/it8172.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * IT8172 IDE controller support
- *
- * Copyright (C) 2000 MontaVista Software Inc.
- * Copyright (C) 2008 Shane McDonald
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "IT8172"
-
-static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 drive_enables;
- u32 drive_timing;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /*
- * The highest value of DIOR/DIOW pulse width and recovery time
- * that can be set in the IT8172 is 8 PCI clock cycles. As a result,
- * it cannot be configured for PIO mode 0. This table sets these
- * parameters to the maximum supported by the IT8172.
- */
- static const u8 timings[] = { 0x3f, 0x3c, 0x1b, 0x12, 0x0a };
-
- pci_read_config_word(dev, 0x40, &drive_enables);
- pci_read_config_dword(dev, 0x44, &drive_timing);
-
- /*
- * Enable port 0x44. The IT8172 spec is confused; it calls
- * this register the "Slave IDE Timing Register", but in fact,
- * it controls timing for both master and slave drives.
- */
- drive_enables |= 0x4000;
-
- drive_enables &= drive->dn ? 0xc006 : 0xc060;
- if (drive->media == ide_disk)
- /* enable prefetch */
- drive_enables |= 0x0004 << (drive->dn * 4);
- if (ide_pio_need_iordy(drive, pio))
- /* enable IORDY sample-point */
- drive_enables |= 0x0002 << (drive->dn * 4);
-
- drive_timing &= drive->dn ? 0x00003f00 : 0x000fc000;
- drive_timing |= timings[pio] << (drive->dn * 6 + 8);
-
- pci_write_config_word(dev, 0x40, drive_enables);
- pci_write_config_dword(dev, 0x44, drive_timing);
-}
-
-static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int a_speed = 3 << (drive->dn * 4);
- int u_flag = 1 << drive->dn;
- int u_speed = 0;
- u8 reg48, reg4a;
- const u8 speed = drive->dma_mode;
-
- pci_read_config_byte(dev, 0x48, ®48);
- pci_read_config_byte(dev, 0x4a, ®4a);
-
- if (speed >= XFER_UDMA_0) {
- u8 udma = speed - XFER_UDMA_0;
- u_speed = udma << (drive->dn * 4);
-
- pci_write_config_byte(dev, 0x48, reg48 | u_flag);
- reg4a &= ~a_speed;
- pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
- } else {
- const u8 mwdma_to_pio[] = { 0, 3, 4 };
-
- pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
- pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
-
- drive->pio_mode =
- mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
-
- it8172_set_pio_mode(hwif, drive);
- }
-}
-
-
-static const struct ide_port_ops it8172_port_ops = {
- .set_pio_mode = it8172_set_pio_mode,
- .set_dma_mode = it8172_set_dma_mode,
-};
-
-static const struct ide_port_info it8172_port_info = {
- .name = DRV_NAME,
- .port_ops = &it8172_port_ops,
- .enablebits = { {0x41, 0x80, 0x80}, {0x00, 0x00, 0x00} },
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4 & ~ATA_PIO0,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
-};
-
-static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return -ENODEV; /* IT8172 is more than an IDE controller */
- return ide_pci_init_one(dev, &it8172_port_info, NULL);
-}
-
-static struct pci_device_id it8172_pci_tbl[] = {
- { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8172), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);
-
-static struct pci_driver it8172_pci_driver = {
- .name = "IT8172_IDE",
- .id_table = it8172_pci_tbl,
- .probe = it8172_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init it8172_ide_init(void)
-{
- return ide_pci_register_driver(&it8172_pci_driver);
-}
-
-static void __exit it8172_ide_exit(void)
-{
- pci_unregister_driver(&it8172_pci_driver);
-}
-
-module_init(it8172_ide_init);
-module_exit(it8172_ide_exit);
-
-MODULE_AUTHOR("Steve Longerbeam");
-MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
deleted file mode 100644
index d0bf4430c437..000000000000
--- a/drivers/ide/it8213.c
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ITE 8213 IDE driver
- *
- * Copyright (C) 2006 Jack Lee
- * Copyright (C) 2006 Alan Cox
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "it8213"
-
-/**
- * it8213_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Set the interface PIO mode.
- */
-
-static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int is_slave = drive->dn & 1;
- int master_port = 0x40;
- int slave_port = 0x44;
- unsigned long flags;
- u16 master_data;
- u8 slave_data;
- static DEFINE_SPINLOCK(tune_lock);
- int control = 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- static const u8 timings[][2] = {
- { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- spin_lock_irqsave(&tune_lock, flags);
- pci_read_config_word(dev, master_port, &master_data);
-
- if (pio > 1)
- control |= 1; /* Programmable timing on */
- if (drive->media != ide_disk)
- control |= 4; /* ATAPI */
- if (ide_pio_need_iordy(drive, pio))
- control |= 2; /* IORDY */
- if (is_slave) {
- master_data |= 0x4000;
- master_data &= ~0x0070;
- if (pio > 1)
- master_data = master_data | (control << 4);
- pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data = slave_data & 0xf0;
- slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1];
- } else {
- master_data &= ~0x3307;
- if (pio > 1)
- master_data = master_data | control;
- master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
- }
- pci_write_config_word(dev, master_port, master_data);
- if (is_slave)
- pci_write_config_byte(dev, slave_port, slave_data);
- spin_unlock_irqrestore(&tune_lock, flags);
-}
-
-/**
- * it8213_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Tune the ITE chipset for the DMA mode.
- */
-
-static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 maslave = 0x40;
- int a_speed = 3 << (drive->dn * 4);
- int u_flag = 1 << drive->dn;
- int v_flag = 0x01 << drive->dn;
- int w_flag = 0x10 << drive->dn;
- int u_speed = 0;
- u16 reg4042, reg4a;
- u8 reg48, reg54, reg55;
- const u8 speed = drive->dma_mode;
-
- pci_read_config_word(dev, maslave, ®4042);
- pci_read_config_byte(dev, 0x48, ®48);
- pci_read_config_word(dev, 0x4a, ®4a);
- pci_read_config_byte(dev, 0x54, ®54);
- pci_read_config_byte(dev, 0x55, ®55);
-
- if (speed >= XFER_UDMA_0) {
- u8 udma = speed - XFER_UDMA_0;
-
- u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
-
- if (!(reg48 & u_flag))
- pci_write_config_byte(dev, 0x48, reg48 | u_flag);
- if (speed >= XFER_UDMA_5)
- pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
- else
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-
- if ((reg4a & a_speed) != u_speed)
- pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
- if (speed > XFER_UDMA_2) {
- if (!(reg54 & v_flag))
- pci_write_config_byte(dev, 0x54, reg54 | v_flag);
- } else
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- } else {
- const u8 mwdma_to_pio[] = { 0, 3, 4 };
-
- if (reg48 & u_flag)
- pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
- if (reg4a & a_speed)
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
- if (reg54 & v_flag)
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- if (reg55 & w_flag)
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-
- if (speed >= XFER_MW_DMA_0)
- drive->pio_mode =
- mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
- else
- drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
-
- it8213_set_pio_mode(hwif, drive);
- }
-}
-
-static u8 it8213_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg42h = 0;
-
- pci_read_config_byte(dev, 0x42, ®42h);
-
- return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static const struct ide_port_ops it8213_port_ops = {
- .set_pio_mode = it8213_set_pio_mode,
- .set_dma_mode = it8213_set_dma_mode,
- .cable_detect = it8213_cable_detect,
-};
-
-static const struct ide_port_info it8213_chipset = {
- .name = DRV_NAME,
- .enablebits = { {0x41, 0x80, 0x80} },
- .port_ops = &it8213_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2_ONLY,
- .mwdma_mask = ATA_MWDMA12_ONLY,
- .udma_mask = ATA_UDMA6,
-};
-
-/**
- * it8213_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an ITE8213 controller. As
- * this device follows the standard interfaces we can use the
- * standard helper functions to do almost all the work for us.
- */
-
-static int it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &it8213_chipset, NULL);
-}
-
-static const struct pci_device_id it8213_pci_tbl[] = {
- { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), 0 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);
-
-static struct pci_driver it8213_pci_driver = {
- .name = "ITE8213_IDE",
- .id_table = it8213_pci_tbl,
- .probe = it8213_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init it8213_ide_init(void)
-{
- return ide_pci_register_driver(&it8213_pci_driver);
-}
-
-static void __exit it8213_ide_exit(void)
-{
- pci_unregister_driver(&it8213_pci_driver);
-}
-
-module_init(it8213_ide_init);
-module_exit(it8213_ide_exit);
-
-MODULE_AUTHOR("Jack Lee, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for the ITE 8213");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
deleted file mode 100644
index 36a64c8ea575..000000000000
--- a/drivers/ide/it821x.c
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- * Copyright (C) 2004 Red Hat
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- * Based in part on the ITE vendor provided SCSI driver.
- *
- * Documentation:
- * Datasheet is freely available, some other documents under NDA.
- *
- * The ITE8212 isn't exactly a standard IDE controller. It has two
- * modes. In pass through mode then it is an IDE controller. In its smart
- * mode its actually quite a capable hardware raid controller disguised
- * as an IDE controller. Smart mode only understands DMA read/write and
- * identify, none of the fancier commands apply. The IT8211 is identical
- * in other respects but lacks the raid mode.
- *
- * Errata:
- * o Rev 0x10 also requires master/slave hold the same DMA timings and
- * cannot do ATAPI MWDMA.
- * o The identify data for raid volumes lacks CHS info (technically ok)
- * but also fails to set the LBA28 and other bits. We fix these in
- * the IDE probe quirk code.
- * o If you write LBA48 sized I/O's (ie > 256 sector) in smart mode
- * raid then the controller firmware dies
- * o Smart mode without RAID doesn't clear all the necessary identify
- * bits to reduce the command set to the one used
- *
- * This has a few impacts on the driver
- * - In pass through mode we do all the work you would expect
- * - In smart mode the clocking set up is done by the controller generally
- * but we must watch the other limits and filter.
- * - There are a few extra vendor commands that actually talk to the
- * controller but only work PIO with no IRQ.
- *
- * Vendor areas of the identify block in smart mode are used for the
- * timing and policy set up. Each HDD in raid mode also has a serial
- * block on the disk. The hardware extra commands are get/set chip status,
- * rebuild, get rebuild status.
- *
- * In Linux the driver supports pass through mode as if the device was
- * just another IDE controller. If the smart mode is running then
- * volumes are managed by the controller firmware and each IDE "disk"
- * is a raid volume. Even more cute - the controller can do automated
- * hotplug and rebuild.
- *
- * The pass through controller itself is a little demented. It has a
- * flaw that it has a single set of PIO/MWDMA timings per channel so
- * non UDMA devices restrict each others performance. It also has a
- * single clock source per channel so mixed UDMA100/133 performance
- * isn't perfect and we have to pick a clock. Thankfully none of this
- * matters in smart mode. ATAPI DMA is not currently supported.
- *
- * It seems the smart mode is a win for RAID1/RAID10 but otherwise not.
- *
- * TODO
- * - ATAPI UDMA is ok but not MWDMA it seems
- * - RAID configuration ioctls
- * - Move to libata once it grows up
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "it821x"
-
-#define QUIRK_VORTEX86 1
-
-struct it821x_dev
-{
- unsigned int smart:1, /* Are we in smart raid mode */
- timing10:1; /* Rev 0x10 */
- u8 clock_mode; /* 0, ATA_50 or ATA_66 */
- u8 want[2][2]; /* Mode/Pri log for master slave */
- /* We need these for switching the clock when DMA goes on/off
- The high byte is the 66Mhz timing */
- u16 pio[2]; /* Cached PIO values */
- u16 mwdma[2]; /* Cached MWDMA values */
- u16 udma[2]; /* Cached UDMA values (per drive) */
- u16 quirks;
-};
-
-#define ATA_66 0
-#define ATA_50 1
-#define ATA_ANY 2
-
-#define UDMA_OFF 0
-#define MWDMA_OFF 0
-
-/*
- * We allow users to force the card into non raid mode without
- * flashing the alternative BIOS. This is also necessary right now
- * for embedded platforms that cannot run a PC BIOS but are using this
- * device.
- */
-
-static int it8212_noraid;
-
-/**
- * it821x_program - program the PIO/MWDMA registers
- * @drive: drive to tune
- * @timing: timing info
- *
- * Program the PIO/MWDMA timing for this channel according to the
- * current clock.
- */
-
-static void it821x_program(ide_drive_t *drive, u16 timing)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int channel = hwif->channel;
- u8 conf;
-
- /* Program PIO/MWDMA timing bits */
- if(itdev->clock_mode == ATA_66)
- conf = timing >> 8;
- else
- conf = timing & 0xFF;
-
- pci_write_config_byte(dev, 0x54 + 4 * channel, conf);
-}
-
-/**
- * it821x_program_udma - program the UDMA registers
- * @drive: drive to tune
- * @timing: timing info
- *
- * Program the UDMA timing for this drive according to the
- * current clock.
- */
-
-static void it821x_program_udma(ide_drive_t *drive, u16 timing)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int channel = hwif->channel;
- u8 unit = drive->dn & 1, conf;
-
- /* Program UDMA timing bits */
- if(itdev->clock_mode == ATA_66)
- conf = timing >> 8;
- else
- conf = timing & 0xFF;
-
- if (itdev->timing10 == 0)
- pci_write_config_byte(dev, 0x56 + 4 * channel + unit, conf);
- else {
- pci_write_config_byte(dev, 0x56 + 4 * channel, conf);
- pci_write_config_byte(dev, 0x56 + 4 * channel + 1, conf);
- }
-}
-
-/**
- * it821x_clock_strategy
- * @drive: drive to set up
- *
- * Select between the 50 and 66Mhz base clocks to get the best
- * results for this interface.
- */
-
-static void it821x_clock_strategy(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- int clock, altclock, sel = 0;
- u8 unit = drive->dn & 1, v;
-
- if(itdev->want[0][0] > itdev->want[1][0]) {
- clock = itdev->want[0][1];
- altclock = itdev->want[1][1];
- } else {
- clock = itdev->want[1][1];
- altclock = itdev->want[0][1];
- }
-
- /*
- * if both clocks can be used for the mode with the higher priority
- * use the clock needed by the mode with the lower priority
- */
- if (clock == ATA_ANY)
- clock = altclock;
-
- /* Nobody cares - keep the same clock */
- if(clock == ATA_ANY)
- return;
- /* No change */
- if(clock == itdev->clock_mode)
- return;
-
- /* Load this into the controller ? */
- if(clock == ATA_66)
- itdev->clock_mode = ATA_66;
- else {
- itdev->clock_mode = ATA_50;
- sel = 1;
- }
-
- pci_read_config_byte(dev, 0x50, &v);
- v &= ~(1 << (1 + hwif->channel));
- v |= sel << (1 + hwif->channel);
- pci_write_config_byte(dev, 0x50, v);
-
- /*
- * Reprogram the UDMA/PIO of the pair drive for the switch
- * MWDMA will be dealt with by the dma switcher
- */
- if(pair && itdev->udma[1-unit] != UDMA_OFF) {
- it821x_program_udma(pair, itdev->udma[1-unit]);
- it821x_program(pair, itdev->pio[1-unit]);
- }
- /*
- * Reprogram the UDMA/PIO of our drive for the switch.
- * MWDMA will be dealt with by the dma switcher
- */
- if(itdev->udma[unit] != UDMA_OFF) {
- it821x_program_udma(drive, itdev->udma[unit]);
- it821x_program(drive, itdev->pio[unit]);
- }
-}
-
-/**
- * it821x_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Tune the host to the desired PIO mode taking into the consideration
- * the maximum PIO mode supported by the other device on the cable.
- */
-
-static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- u8 unit = drive->dn & 1, set_pio = pio;
-
- /* Spec says 89 ref driver uses 88 */
- static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
- static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY };
-
- /*
- * Compute the best PIO mode we can for a given device. We must
- * pick a speed that does not cause problems with the other device
- * on the cable.
- */
- if (pair) {
- u8 pair_pio = pair->pio_mode - XFER_PIO_0;
- /* trim PIO to the slowest of the master/slave */
- if (pair_pio < set_pio)
- set_pio = pair_pio;
- }
-
- /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */
- itdev->want[unit][1] = pio_want[set_pio];
- itdev->want[unit][0] = 1; /* PIO is lowest priority */
- itdev->pio[unit] = pio_timings[set_pio];
- it821x_clock_strategy(drive);
- it821x_program(drive, itdev->pio[unit]);
-}
-
-/**
- * it821x_tune_mwdma - tune a channel for MWDMA
- * @drive: drive to set up
- * @mode_wanted: the target operating mode
- *
- * Load the timing settings for this device mode into the
- * controller when doing MWDMA in pass through mode. The caller
- * must manage the whole lack of per device MWDMA/PIO timings and
- * the shared MWDMA/PIO timing register.
- */
-
-static void it821x_tune_mwdma(ide_drive_t *drive, u8 mode_wanted)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif);
- u8 unit = drive->dn & 1, channel = hwif->channel, conf;
-
- static u16 dma[] = { 0x8866, 0x3222, 0x3121 };
- static u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY };
-
- itdev->want[unit][1] = mwdma_want[mode_wanted];
- itdev->want[unit][0] = 2; /* MWDMA is low priority */
- itdev->mwdma[unit] = dma[mode_wanted];
- itdev->udma[unit] = UDMA_OFF;
-
- /* UDMA bits off - Revision 0x10 do them in pairs */
- pci_read_config_byte(dev, 0x50, &conf);
- if (itdev->timing10)
- conf |= channel ? 0x60: 0x18;
- else
- conf |= 1 << (3 + 2 * channel + unit);
- pci_write_config_byte(dev, 0x50, conf);
-
- it821x_clock_strategy(drive);
- /* FIXME: do we need to program this ? */
- /* it821x_program(drive, itdev->mwdma[unit]); */
-}
-
-/**
- * it821x_tune_udma - tune a channel for UDMA
- * @drive: drive to set up
- * @mode_wanted: the target operating mode
- *
- * Load the timing settings for this device mode into the
- * controller when doing UDMA modes in pass through.
- */
-
-static void it821x_tune_udma(ide_drive_t *drive, u8 mode_wanted)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- u8 unit = drive->dn & 1, channel = hwif->channel, conf;
-
- static u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 };
- static u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 };
-
- itdev->want[unit][1] = udma_want[mode_wanted];
- itdev->want[unit][0] = 3; /* UDMA is high priority */
- itdev->mwdma[unit] = MWDMA_OFF;
- itdev->udma[unit] = udma[mode_wanted];
- if(mode_wanted >= 5)
- itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */
-
- /* UDMA on. Again revision 0x10 must do the pair */
- pci_read_config_byte(dev, 0x50, &conf);
- if (itdev->timing10)
- conf &= channel ? 0x9F: 0xE7;
- else
- conf &= ~ (1 << (3 + 2 * channel + unit));
- pci_write_config_byte(dev, 0x50, conf);
-
- it821x_clock_strategy(drive);
- it821x_program_udma(drive, itdev->udma[unit]);
-
-}
-
-/**
- * it821x_dma_read - DMA hook
- * @drive: drive for DMA
- *
- * The IT821x has a single timing register for MWDMA and for PIO
- * operations. As we flip back and forth we have to reload the
- * clock. In addition the rev 0x10 device only works if the same
- * timing value is loaded into the master and slave UDMA clock
- * so we must also reload that.
- *
- * FIXME: we could figure out in advance if we need to do reloads
- */
-
-static void it821x_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- u8 unit = drive->dn & 1;
-
- if(itdev->mwdma[unit] != MWDMA_OFF)
- it821x_program(drive, itdev->mwdma[unit]);
- else if(itdev->udma[unit] != UDMA_OFF && itdev->timing10)
- it821x_program_udma(drive, itdev->udma[unit]);
- ide_dma_start(drive);
-}
-
-/**
- * it821x_dma_write - DMA hook
- * @drive: drive for DMA stop
- *
- * The IT821x has a single timing register for MWDMA and for PIO
- * operations. As we flip back and forth we have to reload the
- * clock.
- */
-
-static int it821x_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int ret = ide_dma_end(drive);
- u8 unit = drive->dn & 1;
-
- if(itdev->mwdma[unit] != MWDMA_OFF)
- it821x_program(drive, itdev->pio[unit]);
- return ret;
-}
-
-/**
- * it821x_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Tune the ITE chipset for the desired DMA mode.
- */
-
-static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- const u8 speed = drive->dma_mode;
-
- /*
- * MWDMA tuning is really hard because our MWDMA and PIO
- * timings are kept in the same place. We can switch in the
- * host dma on/off callbacks.
- */
- if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_6)
- it821x_tune_udma(drive, speed - XFER_UDMA_0);
- else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- it821x_tune_mwdma(drive, speed - XFER_MW_DMA_0);
-}
-
-/**
- * it821x_cable_detect - cable detection
- * @hwif: interface to check
- *
- * Check for the presence of an ATA66 capable cable on the
- * interface. Problematic as it seems some cards don't have
- * the needed logic onboard.
- */
-
-static u8 it821x_cable_detect(ide_hwif_t *hwif)
-{
- /* The reference driver also only does disk side */
- return ATA_CBL_PATA80;
-}
-
-/**
- * it821x_quirkproc - post init callback
- * @drive: drive
- *
- * This callback is run after the drive has been probed but
- * before anything gets attached. It allows drivers to do any
- * final tuning that is needed, or fixups to work around bugs.
- */
-
-static void it821x_quirkproc(ide_drive_t *drive)
-{
- struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif);
- u16 *id = drive->id;
-
- if (!itdev->smart) {
- /*
- * If we are in pass through mode then not much
- * needs to be done, but we do bother to clear the
- * IRQ mask as we may well be in PIO (eg rev 0x10)
- * for now and we know unmasking is safe on this chipset.
- */
- drive->dev_flags |= IDE_DFLAG_UNMASK;
- } else {
- /*
- * Perform fixups on smart mode. We need to "lose" some
- * capabilities the firmware lacks but does not filter, and
- * also patch up some capability bits that it forgets to set
- * in RAID mode.
- */
-
- /* Check for RAID v native */
- if (strstr((char *)&id[ATA_ID_PROD],
- "Integrated Technology Express")) {
- /* In raid mode the ident block is slightly buggy
- We need to set the bits so that the IDE layer knows
- LBA28. LBA48 and DMA ar valid */
- id[ATA_ID_CAPABILITY] |= (3 << 8); /* LBA28, DMA */
- id[ATA_ID_COMMAND_SET_2] |= 0x0400; /* LBA48 valid */
- id[ATA_ID_CFS_ENABLE_2] |= 0x0400; /* LBA48 on */
- /* Reporting logic */
- printk(KERN_INFO "%s: IT8212 %sRAID %d volume",
- drive->name, id[147] ? "Bootable " : "",
- id[ATA_ID_CSFO]);
- if (id[ATA_ID_CSFO] != 1)
- printk(KERN_CONT "(%dK stripe)", id[146]);
- printk(KERN_CONT ".\n");
- } else {
- /* Non RAID volume. Fixups to stop the core code
- doing unsupported things */
- id[ATA_ID_FIELD_VALID] &= 3;
- id[ATA_ID_QUEUE_DEPTH] = 0;
- id[ATA_ID_COMMAND_SET_1] = 0;
- id[ATA_ID_COMMAND_SET_2] &= 0xC400;
- id[ATA_ID_CFSSE] &= 0xC000;
- id[ATA_ID_CFS_ENABLE_1] = 0;
- id[ATA_ID_CFS_ENABLE_2] &= 0xC400;
- id[ATA_ID_CSF_DEFAULT] &= 0xC000;
- id[127] = 0;
- id[ATA_ID_DLF] = 0;
- id[ATA_ID_CSFO] = 0;
- id[ATA_ID_CFA_POWER] = 0;
- printk(KERN_INFO "%s: Performing identify fixups.\n",
- drive->name);
- }
-
- /*
- * Set MWDMA0 mode as enabled/support - just to tell
- * IDE core that DMA is supported (it821x hardware
- * takes care of DMA mode programming).
- */
- if (ata_id_has_dma(id)) {
- id[ATA_ID_MWDMA_MODES] |= 0x0101;
- drive->current_speed = XFER_MW_DMA_0;
- }
- }
-
-}
-
-static const struct ide_dma_ops it821x_pass_through_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = it821x_dma_start,
- .dma_end = it821x_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-/**
- * init_hwif_it821x - set up hwif structs
- * @hwif: interface to set up
- *
- * We do the basic set up of the interface structure. The IT8212
- * requires several custom handlers so we override the default
- * ide DMA handlers appropriately
- */
-
-static void init_hwif_it821x(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct it821x_dev *itdevs = host->host_priv;
- struct it821x_dev *idev = itdevs + hwif->channel;
- u8 conf;
-
- ide_set_hwifdata(hwif, idev);
-
- pci_read_config_byte(dev, 0x50, &conf);
- if (conf & 1) {
- idev->smart = 1;
- hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- /* Long I/O's although allowed in LBA48 space cause the
- onboard firmware to enter the twighlight zone */
- hwif->rqsize = 256;
- }
-
- /* Pull the current clocks from 0x50 also */
- if (conf & (1 << (1 + hwif->channel)))
- idev->clock_mode = ATA_50;
- else
- idev->clock_mode = ATA_66;
-
- idev->want[0][1] = ATA_ANY;
- idev->want[1][1] = ATA_ANY;
-
- /*
- * Not in the docs but according to the reference driver
- * this is necessary.
- */
-
- if (dev->revision == 0x10) {
- idev->timing10 = 1;
- hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- if (idev->smart == 0)
- printk(KERN_WARNING DRV_NAME " %s: revision 0x10, "
- "workarounds activated\n", pci_name(dev));
- }
-
- if (idev->smart == 0) {
- /* MWDMA/PIO clock switching for pass through mode */
- hwif->dma_ops = &it821x_pass_through_dma_ops;
- } else
- hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
-
- if (hwif->dma_base == 0)
- return;
-
- hwif->ultra_mask = ATA_UDMA6;
- hwif->mwdma_mask = ATA_MWDMA2;
-
- /* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */
- if (idev->quirks & QUIRK_VORTEX86) {
- if (dev->revision == 0x11)
- hwif->ultra_mask = 0;
- }
-}
-
-static void it8212_disable_raid(struct pci_dev *dev)
-{
- /* Reset local CPU, and set BIOS not ready */
- pci_write_config_byte(dev, 0x5E, 0x01);
-
- /* Set to bypass mode, and reset PCI bus */
- pci_write_config_byte(dev, 0x50, 0x00);
- pci_write_config_word(dev, PCI_COMMAND,
- PCI_COMMAND_PARITY | PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- pci_write_config_word(dev, 0x40, 0xA0F3);
-
- pci_write_config_dword(dev,0x4C, 0x02040204);
- pci_write_config_byte(dev, 0x42, 0x36);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
-}
-
-static int init_chipset_it821x(struct pci_dev *dev)
-{
- u8 conf;
- static char *mode[2] = { "pass through", "smart" };
-
- /* Force the card into bypass mode if so requested */
- if (it8212_noraid) {
- printk(KERN_INFO DRV_NAME " %s: forcing bypass mode\n",
- pci_name(dev));
- it8212_disable_raid(dev);
- }
- pci_read_config_byte(dev, 0x50, &conf);
- printk(KERN_INFO DRV_NAME " %s: controller in %s mode\n",
- pci_name(dev), mode[conf & 1]);
- return 0;
-}
-
-static const struct ide_port_ops it821x_port_ops = {
- /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */
- .set_pio_mode = it821x_set_pio_mode,
- .set_dma_mode = it821x_set_dma_mode,
- .quirkproc = it821x_quirkproc,
- .cable_detect = it821x_cable_detect,
-};
-
-static const struct ide_port_info it821x_chipset = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_it821x,
- .init_hwif = init_hwif_it821x,
- .port_ops = &it821x_port_ops,
- .pio_mask = ATA_PIO4,
-};
-
-/**
- * it821x_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an ITE821x controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct it821x_dev *itdevs;
- int rc;
-
- itdevs = kcalloc(2, sizeof(*itdevs), GFP_KERNEL);
- if (itdevs == NULL) {
- printk(KERN_ERR DRV_NAME " %s: out of memory\n", pci_name(dev));
- return -ENOMEM;
- }
-
- itdevs->quirks = id->driver_data;
-
- rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
- if (rc)
- kfree(itdevs);
-
- return rc;
-}
-
-static void it821x_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct it821x_dev *itdevs = host->host_priv;
-
- ide_pci_remove(dev);
- kfree(itdevs);
-}
-
-static const struct pci_device_id it821x_pci_tbl[] = {
- { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
- { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
- { PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), QUIRK_VORTEX86 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, it821x_pci_tbl);
-
-static struct pci_driver it821x_pci_driver = {
- .name = "ITE821x IDE",
- .id_table = it821x_pci_tbl,
- .probe = it821x_init_one,
- .remove = it821x_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init it821x_ide_init(void)
-{
- return ide_pci_register_driver(&it821x_pci_driver);
-}
-
-static void __exit it821x_ide_exit(void)
-{
- pci_unregister_driver(&it821x_pci_driver);
-}
-
-module_init(it821x_ide_init);
-module_exit(it821x_ide_exit);
-
-module_param_named(noraid, it8212_noraid, int, S_IRUGO);
-MODULE_PARM_DESC(noraid, "Force card into bypass mode");
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for the ITE 821x");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c
deleted file mode 100644
index ae6480dcbadf..000000000000
--- a/drivers/ide/jmicron.c
+++ /dev/null
@@ -1,176 +0,0 @@
-
-/*
- * Copyright (C) 2006 Red Hat
- *
- * May be copied or modified under the terms of the GNU General Public License
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "jmicron"
-
-typedef enum {
- PORT_PATA0 = 0,
- PORT_PATA1 = 1,
- PORT_SATA = 2,
-} port_type;
-
-/**
- * jmicron_cable_detect - cable detection
- * @hwif: IDE port
- *
- * Returns the cable type.
- */
-
-static u8 jmicron_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
-
- u32 control;
- u32 control5;
-
- int port = hwif->channel;
- port_type port_map[2];
-
- pci_read_config_dword(pdev, 0x40, &control);
-
- /* There are two basic mappings. One has the two SATA ports merged
- as master/slave and the secondary as PATA, the other has only the
- SATA port mapped */
- if (control & (1 << 23)) {
- port_map[0] = PORT_SATA;
- port_map[1] = PORT_PATA0;
- } else {
- port_map[0] = PORT_SATA;
- port_map[1] = PORT_SATA;
- }
-
- /* The 365/366 may have this bit set to map the second PATA port
- as the internal primary channel */
- pci_read_config_dword(pdev, 0x80, &control5);
- if (control5 & (1<<24))
- port_map[0] = PORT_PATA1;
-
- /* The two ports may then be logically swapped by the firmware */
- if (control & (1 << 22))
- port = port ^ 1;
-
- /*
- * Now we know which physical port we are talking about we can
- * actually do our cable checking etc. Thankfully we don't need
- * to do the plumbing for other cases.
- */
- switch (port_map[port]) {
- case PORT_PATA0:
- if (control & (1 << 3)) /* 40/80 pin primary */
- return ATA_CBL_PATA40;
- return ATA_CBL_PATA80;
- case PORT_PATA1:
- if (control5 & (1 << 19)) /* 40/80 pin secondary */
- return ATA_CBL_PATA40;
- return ATA_CBL_PATA80;
- case PORT_SATA:
- break;
- }
- /* Avoid bogus "control reaches end of non-void function" */
- return ATA_CBL_PATA80;
-}
-
-static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-}
-
-/**
- * jmicron_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * As the JMicron snoops for timings we don't need to do anything here.
- */
-
-static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-}
-
-static const struct ide_port_ops jmicron_port_ops = {
- .set_pio_mode = jmicron_set_pio_mode,
- .set_dma_mode = jmicron_set_dma_mode,
- .cable_detect = jmicron_cable_detect,
-};
-
-static const struct ide_port_info jmicron_chipset = {
- .name = DRV_NAME,
- .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
- .port_ops = &jmicron_port_ops,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
-};
-
-/**
- * jmicron_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds a Jmicron controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &jmicron_chipset, NULL);
-}
-
-/* All JMB PATA controllers have and will continue to have the same
- * interface. Matching vendor and device class is enough for all
- * current and future controllers if the controller is programmed
- * properly.
- *
- * If libata is configured, jmicron PCI quirk programs the controller
- * into the correct mode. If libata isn't configured, match known
- * device IDs too to maintain backward compatibility.
- */
-static struct pci_device_id jmicron_pci_tbl[] = {
-#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE)
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) },
-#endif
- { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl);
-
-static struct pci_driver jmicron_pci_driver = {
- .name = "JMicron IDE",
- .id_table = jmicron_pci_tbl,
- .probe = jmicron_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init jmicron_ide_init(void)
-{
- return ide_pci_register_driver(&jmicron_pci_driver);
-}
-
-static void __exit jmicron_ide_exit(void)
-{
- pci_unregister_driver(&jmicron_pci_driver);
-}
-
-module_init(jmicron_ide_init);
-module_exit(jmicron_ide_exit);
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for the JMicron in legacy modes");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c
deleted file mode 100644
index 11a672aba6ee..000000000000
--- a/drivers/ide/ns87415.c
+++ /dev/null
@@ -1,350 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1997-1998 Mark Lord <mlord@...ox.com>
- * Copyright (C) 1998 Eddie C. Dost <ecd@...net.be>
- * Copyright (C) 1999-2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
- *
- * Inspired by an earlier effort from David S. Miller <davem@...hat.com>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "ns87415"
-
-#ifdef CONFIG_SUPERIO
-/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
- * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
- * which use the integrated NS87514 cell for CD-ROM support.
- * i.e we have to support for CD-ROM installs.
- * See drivers/parisc/superio.c for more gory details.
- */
-#include <asm/superio.h>
-
-#define SUPERIO_IDE_MAX_RETRIES 25
-
-/* Because of a defect in Super I/O, all reads of the PCI DMA status
- * registers, IDE status register and the IDE select register need to be
- * retried
- */
-static u8 superio_ide_inb (unsigned long port)
-{
- u8 tmp;
- int retries = SUPERIO_IDE_MAX_RETRIES;
-
- /* printk(" [ reading port 0x%x with retry ] ", port); */
-
- do {
- tmp = inb(port);
- if (tmp == 0)
- udelay(50);
- } while (tmp == 0 && retries-- > 0);
-
- return tmp;
-}
-
-static u8 superio_read_status(ide_hwif_t *hwif)
-{
- return superio_ide_inb(hwif->io_ports.status_addr);
-}
-
-static u8 superio_dma_sff_read_status(ide_hwif_t *hwif)
-{
- return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
-}
-
-static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf,
- u8 valid)
-{
- struct ide_io_ports *io_ports = &drive->hwif->io_ports;
-
- if (valid & IDE_VALID_ERROR)
- tf->error = inb(io_ports->feature_addr);
- if (valid & IDE_VALID_NSECT)
- tf->nsect = inb(io_ports->nsect_addr);
- if (valid & IDE_VALID_LBAL)
- tf->lbal = inb(io_ports->lbal_addr);
- if (valid & IDE_VALID_LBAM)
- tf->lbam = inb(io_ports->lbam_addr);
- if (valid & IDE_VALID_LBAH)
- tf->lbah = inb(io_ports->lbah_addr);
- if (valid & IDE_VALID_DEVICE)
- tf->device = superio_ide_inb(io_ports->device_addr);
-}
-
-static void ns87415_dev_select(ide_drive_t *drive);
-
-static const struct ide_tp_ops superio_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = superio_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ns87415_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = superio_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static void superio_init_iops(struct hwif_s *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u32 dma_stat;
- u8 port = hwif->channel, tmp;
-
- dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
-
- /* Clear error/interrupt, enable dma */
- tmp = superio_ide_inb(dma_stat);
- outb(tmp | 0x66, dma_stat);
-}
-#else
-#define superio_dma_sff_read_status ide_dma_sff_read_status
-#endif
-
-static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
-
-/*
- * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
- * the IRQ associated with the port,
- * and selects either PIO or DMA handshaking for the next I/O operation.
- */
-static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
- unsigned long flags;
-
- local_irq_save(flags);
- new = *old;
-
- /* Adjust IRQ enable bit */
- bit = 1 << (8 + hwif->channel);
-
- if (drive->dev_flags & IDE_DFLAG_PRESENT)
- new &= ~bit;
- else
- new |= bit;
-
- /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
- bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
- other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
- new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
-
- if (new != *old) {
- unsigned char stat;
-
- /*
- * Don't change DMA engine settings while Write Buffers
- * are busy.
- */
- (void) pci_read_config_byte(dev, 0x43, &stat);
- while (stat & 0x03) {
- udelay(1);
- (void) pci_read_config_byte(dev, 0x43, &stat);
- }
-
- *old = new;
- (void) pci_write_config_dword(dev, 0x40, new);
-
- /*
- * And let things settle...
- */
- udelay(10);
- }
-
- local_irq_restore(flags);
-}
-
-static void ns87415_dev_select(ide_drive_t *drive)
-{
- ns87415_prepare_drive(drive,
- !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
-
- outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
-}
-
-static void ns87415_dma_start(ide_drive_t *drive)
-{
- ns87415_prepare_drive(drive, 1);
- ide_dma_start(drive);
-}
-
-static int ns87415_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat = 0, dma_cmd = 0;
-
- dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
- /* get DMA command mode */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- /* stop DMA */
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- /* from ERRATA: clear the INTR & ERROR bits */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
-
- ns87415_prepare_drive(drive, 0);
-
- /* verify good DMA status */
- return (dma_stat & 7) != 4;
-}
-
-static void init_hwif_ns87415 (ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int ctrl, using_inta;
- u8 progif;
-#ifdef __sparc_v9__
- int timeout;
- u8 stat;
-#endif
-
- /*
- * We cannot probe for IRQ: both ports share common IRQ on INTA.
- * Also, leave IRQ masked during drive probing, to prevent infinite
- * interrupts from a potentially floating INTA..
- *
- * IRQs get unmasked in dev_select() when drive is first used.
- */
- (void) pci_read_config_dword(dev, 0x40, &ctrl);
- (void) pci_read_config_byte(dev, 0x09, &progif);
- /* is irq in "native" mode? */
- using_inta = progif & (1 << (hwif->channel << 1));
- if (!using_inta)
- using_inta = ctrl & (1 << (4 + hwif->channel));
- if (hwif->mate) {
- hwif->select_data = hwif->mate->select_data;
- } else {
- hwif->select_data = (unsigned long)
- &ns87415_control[ns87415_count++];
- ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
- if (using_inta)
- ctrl &= ~(1 << 6); /* unmask INTA */
- *((unsigned int *)hwif->select_data) = ctrl;
- (void) pci_write_config_dword(dev, 0x40, ctrl);
-
- /*
- * Set prefetch size to 512 bytes for both ports,
- * but don't turn on/off prefetching here.
- */
- pci_write_config_byte(dev, 0x55, 0xee);
-
-#ifdef __sparc_v9__
- /*
- * XXX: Reset the device, if we don't it will not respond to
- * dev_select() properly during first ide_probe_port().
- */
- timeout = 10000;
- outb(12, hwif->io_ports.ctl_addr);
- udelay(10);
- outb(8, hwif->io_ports.ctl_addr);
- do {
- udelay(50);
- stat = hwif->tp_ops->read_status(hwif);
- if (stat == 0xff)
- break;
- } while ((stat & ATA_BUSY) && --timeout);
-#endif
- }
-
- if (!using_inta)
- hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
-
- if (!hwif->dma_base)
- return;
-
- outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
-}
-
-static const struct ide_tp_ops ns87415_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ns87415_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_dma_ops ns87415_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ns87415_dma_start,
- .dma_end = ns87415_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = superio_dma_sff_read_status,
-};
-
-static const struct ide_port_info ns87415_chipset = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_ns87415,
- .tp_ops = &ns87415_tp_ops,
- .dma_ops = &ns87415_dma_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
- IDE_HFLAG_NO_ATAPI_DMA,
-};
-
-static int ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = ns87415_chipset;
-
-#ifdef CONFIG_SUPERIO
- if (PCI_SLOT(dev->devfn) == 0xE) {
- /* Built-in - assume it's under superio. */
- d.init_iops = superio_init_iops;
- d.tp_ops = &superio_tp_ops;
- }
-#endif
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id ns87415_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
-
-static struct pci_driver ns87415_pci_driver = {
- .name = "NS87415_IDE",
- .id_table = ns87415_pci_tbl,
- .probe = ns87415_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init ns87415_ide_init(void)
-{
- return ide_pci_register_driver(&ns87415_pci_driver);
-}
-
-static void __exit ns87415_ide_exit(void)
-{
- pci_unregister_driver(&ns87415_pci_driver);
-}
-
-module_init(ns87415_ide_init);
-module_exit(ns87415_ide_exit);
-
-MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
deleted file mode 100644
index c374f82333c6..000000000000
--- a/drivers/ide/opti621.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
- */
-
-/*
- * Authors:
- * Jaromir Koutek <miri@...knet.cz>,
- * Jan Harkes <jaharkes@....nl>,
- * Mark Lord <mlord@...ox.com>
- * Some parts of code are from ali14xx.c and from rz1000.c.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "opti621"
-
-#define READ_REG 0 /* index of Read cycle timing register */
-#define WRITE_REG 1 /* index of Write cycle timing register */
-#define CNTRL_REG 3 /* index of Control register */
-#define STRAP_REG 5 /* index of Strap register */
-#define MISC_REG 6 /* index of Miscellaneous register */
-
-static int reg_base;
-
-static DEFINE_SPINLOCK(opti621_lock);
-
-/* Write value to register reg, base of register
- * is at reg_base (0x1f0 primary, 0x170 secondary,
- * if not changed by PCI configuration).
- * This is from setupvic.exe program.
- */
-static void write_reg(u8 value, int reg)
-{
- inw(reg_base + 1);
- inw(reg_base + 1);
- outb(3, reg_base + 2);
- outb(value, reg_base + reg);
- outb(0x83, reg_base + 2);
-}
-
-/* Read value from register reg, base of register
- * is at reg_base (0x1f0 primary, 0x170 secondary,
- * if not changed by PCI configuration).
- * This is from setupvic.exe program.
- */
-static u8 read_reg(int reg)
-{
- u8 ret = 0;
-
- inw(reg_base + 1);
- inw(reg_base + 1);
- outb(3, reg_base + 2);
- ret = inb(reg_base + reg);
- outb(0x83, reg_base + 2);
-
- return ret;
-}
-
-static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- ide_drive_t *pair = ide_get_pair_dev(drive);
- unsigned long flags;
- unsigned long mode = drive->pio_mode, pair_mode;
- const u8 pio = mode - XFER_PIO_0;
- u8 tim, misc, addr_pio = pio, clk;
-
- /* DRDY is default 2 (by OPTi Databook) */
- static const u8 addr_timings[2][5] = {
- { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
- { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
- };
- static const u8 data_rec_timings[2][5] = {
- { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
- { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
- };
-
- ide_set_drivedata(drive, (void *)mode);
-
- if (pair) {
- pair_mode = (unsigned long)ide_get_drivedata(pair);
- if (pair_mode && pair_mode < mode)
- addr_pio = pair_mode - XFER_PIO_0;
- }
-
- spin_lock_irqsave(&opti621_lock, flags);
-
- reg_base = hwif->io_ports.data_addr;
-
- /* allow Register-B */
- outb(0xc0, reg_base + CNTRL_REG);
- /* hmm, setupvic.exe does this ;-) */
- outb(0xff, reg_base + 5);
- /* if reads 0xff, adapter not exist? */
- (void)inb(reg_base + CNTRL_REG);
- /* if reads 0xc0, no interface exist? */
- read_reg(CNTRL_REG);
-
- /* check CLK speed */
- clk = read_reg(STRAP_REG) & 1;
-
- printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
-
- tim = data_rec_timings[clk][pio];
- misc = addr_timings[clk][addr_pio];
-
- /* select Index-0/1 for Register-A/B */
- write_reg(drive->dn & 1, MISC_REG);
- /* set read cycle timings */
- write_reg(tim, READ_REG);
- /* set write cycle timings */
- write_reg(tim, WRITE_REG);
-
- /* use Register-A for drive 0 */
- /* use Register-B for drive 1 */
- write_reg(0x85, CNTRL_REG);
-
- /* set address setup, DRDY timings, */
- /* and read prefetch for both drives */
- write_reg(misc, MISC_REG);
-
- spin_unlock_irqrestore(&opti621_lock, flags);
-}
-
-static const struct ide_port_ops opti621_port_ops = {
- .set_pio_mode = opti621_set_pio_mode,
-};
-
-static const struct ide_port_info opti621_chipset = {
- .name = DRV_NAME,
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
-};
-
-static int opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &opti621_chipset, NULL);
-}
-
-static const struct pci_device_id opti621_pci_tbl[] = {
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
-
-static struct pci_driver opti621_pci_driver = {
- .name = "Opti621_IDE",
- .id_table = opti621_pci_tbl,
- .probe = opti621_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init opti621_ide_init(void)
-{
- return ide_pci_register_driver(&opti621_pci_driver);
-}
-
-static void __exit opti621_ide_exit(void)
-{
- pci_unregister_driver(&opti621_pci_driver);
-}
-
-module_init(opti621_ide_init);
-module_exit(opti621_ide_exit);
-
-MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for Opti621 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
deleted file mode 100644
index d1fe4c13e35c..000000000000
--- a/drivers/ide/palm_bk3710.c
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Palmchip bk3710 IDE controller
- *
- * Copyright (C) 2006 Texas Instruments.
- * Copyright (C) 2007 MontaVista Software, Inc., <source@...sta.com>
- *
- * ----------------------------------------------------------------------------
- *
- * ----------------------------------------------------------------------------
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-
-/* Offset of the primary interface registers */
-#define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0
-
-/* Primary Control Offset */
-#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
-
-#define BK3710_BMICP 0x00
-#define BK3710_BMISP 0x02
-#define BK3710_BMIDTP 0x04
-#define BK3710_IDETIMP 0x40
-#define BK3710_IDESTATUS 0x47
-#define BK3710_UDMACTL 0x48
-#define BK3710_MISCCTL 0x50
-#define BK3710_REGSTB 0x54
-#define BK3710_REGRCVR 0x58
-#define BK3710_DATSTB 0x5C
-#define BK3710_DATRCVR 0x60
-#define BK3710_DMASTB 0x64
-#define BK3710_DMARCVR 0x68
-#define BK3710_UDMASTB 0x6C
-#define BK3710_UDMATRP 0x70
-#define BK3710_UDMAENV 0x74
-#define BK3710_IORDYTMP 0x78
-
-static unsigned ideclk_period; /* in nanoseconds */
-
-struct palm_bk3710_udmatiming {
- unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
- unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
- /* tENV is always a minimum of 20 nsec */
-};
-
-static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
- { 160, 240 / 2 }, /* UDMA Mode 0 */
- { 125, 160 / 2 }, /* UDMA Mode 1 */
- { 100, 120 / 2 }, /* UDMA Mode 2 */
- { 100, 90 / 2 }, /* UDMA Mode 3 */
- { 100, 60 / 2 }, /* UDMA Mode 4 */
- { 85, 40 / 2 }, /* UDMA Mode 5 */
-};
-
-static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
- unsigned int mode)
-{
- u8 tenv, trp, t0;
- u32 val32;
- u16 val16;
-
- /* DMA Data Setup */
- t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
- ideclk_period) - 1;
- tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
- trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
- ideclk_period) - 1;
-
- /* udmastb Ultra DMA Access Strobe Width */
- val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
- val32 |= (t0 << (dev ? 8 : 0));
- writel(val32, base + BK3710_UDMASTB);
-
- /* udmatrp Ultra DMA Ready to Pause Time */
- val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
- val32 |= (trp << (dev ? 8 : 0));
- writel(val32, base + BK3710_UDMATRP);
-
- /* udmaenv Ultra DMA envelop Time */
- val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
- val32 |= (tenv << (dev ? 8 : 0));
- writel(val32, base + BK3710_UDMAENV);
-
- /* Enable UDMA for Device */
- val16 = readw(base + BK3710_UDMACTL) | (1 << dev);
- writew(val16, base + BK3710_UDMACTL);
-}
-
-static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
- unsigned short min_cycle,
- unsigned int mode)
-{
- u8 td, tkw, t0;
- u32 val32;
- u16 val16;
- struct ide_timing *t;
- int cycletime;
-
- t = ide_timing_find_mode(mode);
- cycletime = max_t(int, t->cycle, min_cycle);
-
- /* DMA Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ideclk_period);
- td = DIV_ROUND_UP(t->active, ideclk_period);
- tkw = t0 - td - 1;
- td -= 1;
-
- val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
- val32 |= (td << (dev ? 8 : 0));
- writel(val32, base + BK3710_DMASTB);
-
- val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
- val32 |= (tkw << (dev ? 8 : 0));
- writel(val32, base + BK3710_DMARCVR);
-
- /* Disable UDMA for Device */
- val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev);
- writew(val16, base + BK3710_UDMACTL);
-}
-
-static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
- unsigned int dev, unsigned int cycletime,
- unsigned int mode)
-{
- u8 t2, t2i, t0;
- u32 val32;
- struct ide_timing *t;
-
- t = ide_timing_find_mode(XFER_PIO_0 + mode);
-
- /* PIO Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ideclk_period);
- t2 = DIV_ROUND_UP(t->active, ideclk_period);
-
- t2i = t0 - t2 - 1;
- t2 -= 1;
-
- val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
- val32 |= (t2 << (dev ? 8 : 0));
- writel(val32, base + BK3710_DATSTB);
-
- val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
- val32 |= (t2i << (dev ? 8 : 0));
- writel(val32, base + BK3710_DATRCVR);
-
- if (mate) {
- u8 mode2 = mate->pio_mode - XFER_PIO_0;
-
- if (mode2 < mode)
- mode = mode2;
- }
-
- /* TASKFILE Setup */
- t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
- t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
-
- t2i = t0 - t2 - 1;
- t2 -= 1;
-
- val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
- val32 |= (t2 << (dev ? 8 : 0));
- writel(val32, base + BK3710_REGSTB);
-
- val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
- val32 |= (t2i << (dev ? 8 : 0));
- writel(val32, base + BK3710_REGRCVR);
-}
-
-static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- int is_slave = drive->dn & 1;
- void __iomem *base = (void __iomem *)hwif->dma_base;
- const u8 xferspeed = drive->dma_mode;
-
- if (xferspeed >= XFER_UDMA_0) {
- palm_bk3710_setudmamode(base, is_slave,
- xferspeed - XFER_UDMA_0);
- } else {
- palm_bk3710_setdmamode(base, is_slave,
- drive->id[ATA_ID_EIDE_DMA_MIN],
- xferspeed);
- }
-}
-
-static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned int cycle_time;
- int is_slave = drive->dn & 1;
- ide_drive_t *mate;
- void __iomem *base = (void __iomem *)hwif->dma_base;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /*
- * Obtain the drive PIO data for tuning the Palm Chip registers
- */
- cycle_time = ide_pio_cycle_time(drive, pio);
- mate = ide_get_pair_dev(drive);
- palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
-}
-
-static void palm_bk3710_chipinit(void __iomem *base)
-{
- /*
- * REVISIT: the ATA reset signal needs to be managed through a
- * GPIO, which means it should come from platform_data. Until
- * we get and use such information, we have to trust that things
- * have been reset before we get here.
- */
-
- /*
- * Program the IDETIMP Register Value based on the following assumptions
- *
- * (ATA_IDETIMP_IDEEN , ENABLE ) |
- * (ATA_IDETIMP_PREPOST1 , DISABLE) |
- * (ATA_IDETIMP_PREPOST0 , DISABLE) |
- *
- * DM6446 silicon rev 2.1 and earlier have no observed net benefit
- * from enabling prefetch/postwrite.
- */
- writew(BIT(15), base + BK3710_IDETIMP);
-
- /*
- * UDMACTL Ultra-ATA DMA Control
- * (ATA_UDMACTL_UDMAP1 , 0 ) |
- * (ATA_UDMACTL_UDMAP0 , 0 )
- *
- */
- writew(0, base + BK3710_UDMACTL);
-
- /*
- * MISCCTL Miscellaneous Conrol Register
- * (ATA_MISCCTL_HWNHLD1P , 1 cycle)
- * (ATA_MISCCTL_HWNHLD0P , 1 cycle)
- * (ATA_MISCCTL_TIMORIDE , 1)
- */
- writel(0x001, base + BK3710_MISCCTL);
-
- /*
- * IORDYTMP IORDY Timer for Primary Register
- * (ATA_IORDYTMP_IORDYTMP , 0xffff )
- */
- writel(0xFFFF, base + BK3710_IORDYTMP);
-
- /*
- * Configure BMISP Register
- * (ATA_BMISP_DMAEN1 , DISABLE ) |
- * (ATA_BMISP_DMAEN0 , DISABLE ) |
- * (ATA_BMISP_IORDYINT , CLEAR) |
- * (ATA_BMISP_INTRSTAT , CLEAR) |
- * (ATA_BMISP_DMAERROR , CLEAR)
- */
- writew(0, base + BK3710_BMISP);
-
- palm_bk3710_setpiomode(base, NULL, 0, 600, 0);
- palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
-}
-
-static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
-{
- return ATA_CBL_PATA80;
-}
-
-static int palm_bk3710_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
-
- if (ide_allocate_dma_engine(hwif))
- return -1;
-
- hwif->dma_base = hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET;
-
- return 0;
-}
-
-static const struct ide_port_ops palm_bk3710_ports_ops = {
- .set_pio_mode = palm_bk3710_set_pio_mode,
- .set_dma_mode = palm_bk3710_set_dma_mode,
- .cable_detect = palm_bk3710_cable_detect,
-};
-
-static struct ide_port_info palm_bk3710_port_info __initdata = {
- .init_dma = palm_bk3710_init_dma,
- .port_ops = &palm_bk3710_ports_ops,
- .dma_ops = &sff_dma_ops,
- .host_flags = IDE_HFLAG_MMIO,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .chipset = ide_palm3710,
-};
-
-static int __init palm_bk3710_probe(struct platform_device *pdev)
-{
- struct clk *clk;
- struct resource *mem, *irq;
- void __iomem *base;
- unsigned long rate, mem_size;
- int i, rc;
- struct ide_hw hw, *hws[] = { &hw };
-
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk))
- return -ENODEV;
-
- clk_enable(clk);
- rate = clk_get_rate(clk);
- if (!rate)
- return -EINVAL;
-
- /* NOTE: round *down* to meet minimum timings; we count in clocks */
- ideclk_period = 1000000000UL / rate;
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (mem == NULL) {
- printk(KERN_ERR "failed to get memory region resource\n");
- return -ENODEV;
- }
-
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (irq == NULL) {
- printk(KERN_ERR "failed to get IRQ resource\n");
- return -ENODEV;
- }
-
- mem_size = resource_size(mem);
- if (request_mem_region(mem->start, mem_size, "palm_bk3710") == NULL) {
- printk(KERN_ERR "failed to request memory region\n");
- return -EBUSY;
- }
-
- base = ioremap(mem->start, mem_size);
- if (!base) {
- printk(KERN_ERR "failed to map IO memory\n");
- release_mem_region(mem->start, mem_size);
- return -ENOMEM;
- }
-
- /* Configure the Palm Chip controller */
- palm_bk3710_chipinit(base);
-
- memset(&hw, 0, sizeof(hw));
- for (i = 0; i < IDE_NR_PORTS - 2; i++)
- hw.io_ports_array[i] = (unsigned long)
- (base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
- hw.io_ports.ctl_addr = (unsigned long)
- (base + IDE_PALM_ATA_PRI_CTL_OFFSET);
- hw.irq = irq->start;
- hw.dev = &pdev->dev;
-
- palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
- ATA_UDMA5;
-
- /* Register the IDE interface with Linux */
- rc = ide_host_add(&palm_bk3710_port_info, hws, 1, NULL);
- if (rc)
- goto out;
-
- return 0;
-out:
- printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
- return rc;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:palm_bk3710");
-
-static struct platform_driver platform_bk_driver = {
- .driver = {
- .name = "palm_bk3710",
- },
-};
-
-static int __init palm_bk3710_init(void)
-{
- return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
-}
-
-module_init(palm_bk3710_init);
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
deleted file mode 100644
index 4fcafb9121e0..000000000000
--- a/drivers/ide/pdc202xx_new.c
+++ /dev/null
@@ -1,557 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Promise TX2/TX4/TX2000/133 IDE driver
- *
- * Split from:
- * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002
- * Copyright (C) 1998-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2005-2007 MontaVista Software, Inc.
- * Portions Copyright (C) 1999 Promise Technology, Inc.
- * Author: Frank Tiernan (frankt@...mise.com)
- * Released under terms of General Public License
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/ktime.h>
-
-#include <asm/io.h>
-
-#ifdef CONFIG_PPC_PMAC
-#include <asm/prom.h>
-#endif
-
-#define DRV_NAME "pdc202xx_new"
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args)
-#else
-#define DBG(fmt, args...)
-#endif
-
-static u8 max_dma_rate(struct pci_dev *pdev)
-{
- u8 mode;
-
- switch(pdev->device) {
- case PCI_DEVICE_ID_PROMISE_20277:
- case PCI_DEVICE_ID_PROMISE_20276:
- case PCI_DEVICE_ID_PROMISE_20275:
- case PCI_DEVICE_ID_PROMISE_20271:
- case PCI_DEVICE_ID_PROMISE_20269:
- mode = 4;
- break;
- case PCI_DEVICE_ID_PROMISE_20270:
- case PCI_DEVICE_ID_PROMISE_20268:
- mode = 3;
- break;
- default:
- return 0;
- }
-
- return mode;
-}
-
-/**
- * get_indexed_reg - Get indexed register
- * @hwif: for the port address
- * @index: index of the indexed register
- */
-static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
-{
- u8 value;
-
- outb(index, hwif->dma_base + 1);
- value = inb(hwif->dma_base + 3);
-
- DBG("index[%02X] value[%02X]\n", index, value);
- return value;
-}
-
-/**
- * set_indexed_reg - Set indexed register
- * @hwif: for the port address
- * @index: index of the indexed register
- */
-static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
-{
- outb(index, hwif->dma_base + 1);
- outb(value, hwif->dma_base + 3);
- DBG("index[%02X] value[%02X]\n", index, value);
-}
-
-/*
- * ATA Timing Tables based on 133 MHz PLL output clock.
- *
- * If the PLL outputs 100 MHz clock, the ASIC hardware will set
- * the timing registers automatically when "set features" command is
- * issued to the device. However, if the PLL output clock is 133 MHz,
- * the following tables must be used.
- */
-static struct pio_timing {
- u8 reg0c, reg0d, reg13;
-} pio_timings [] = {
- { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */
- { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */
- { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */
- { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
- { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
-};
-
-static struct mwdma_timing {
- u8 reg0e, reg0f;
-} mwdma_timings [] = {
- { 0xdf, 0x5f }, /* MWDMA mode 0 */
- { 0x6b, 0x27 }, /* MWDMA mode 1 */
- { 0x69, 0x25 }, /* MWDMA mode 2 */
-};
-
-static struct udma_timing {
- u8 reg10, reg11, reg12;
-} udma_timings [] = {
- { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
- { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
- { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
- { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
- { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
- { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
- { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
-};
-
-static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
- const u8 speed = drive->dma_mode;
-
- /*
- * IDE core issues SETFEATURES_XFER to the drive first (thanks to
- * IDE_HFLAG_POST_SET_MODE in ->host_flags). PDC202xx hardware will
- * automatically set the timing registers based on 100 MHz PLL output.
- *
- * As we set up the PLL to output 133 MHz for UltraDMA/133 capable
- * chips, we must override the default register settings...
- */
- if (max_dma_rate(dev) == 4) {
- u8 mode = speed & 0x07;
-
- if (speed >= XFER_UDMA_0) {
- set_indexed_reg(hwif, 0x10 + adj,
- udma_timings[mode].reg10);
- set_indexed_reg(hwif, 0x11 + adj,
- udma_timings[mode].reg11);
- set_indexed_reg(hwif, 0x12 + adj,
- udma_timings[mode].reg12);
- } else {
- set_indexed_reg(hwif, 0x0e + adj,
- mwdma_timings[mode].reg0e);
- set_indexed_reg(hwif, 0x0f + adj,
- mwdma_timings[mode].reg0f);
- }
- } else if (speed == XFER_UDMA_2) {
- /* Set tHOLD bit to 0 if using UDMA mode 2 */
- u8 tmp = get_indexed_reg(hwif, 0x10 + adj);
-
- set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
- }
-}
-
-static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- if (max_dma_rate(dev) == 4) {
- set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
- set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
- set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
- }
-}
-
-static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
-{
- if (get_indexed_reg(hwif, 0x0b) & 0x04)
- return ATA_CBL_PATA40;
- else
- return ATA_CBL_PATA80;
-}
-
-static void pdcnew_reset(ide_drive_t *drive)
-{
- /*
- * Deleted this because it is redundant from the caller.
- */
- printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n",
- drive->hwif->channel ? "Secondary" : "Primary");
-}
-
-/**
- * read_counter - Read the byte count registers
- * @dma_base: for the port address
- */
-static long read_counter(u32 dma_base)
-{
- u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
- u8 cnt0, cnt1, cnt2, cnt3;
- long count = 0, last;
- int retry = 3;
-
- do {
- last = count;
-
- /* Read the current count */
- outb(0x20, pri_dma_base + 0x01);
- cnt0 = inb(pri_dma_base + 0x03);
- outb(0x21, pri_dma_base + 0x01);
- cnt1 = inb(pri_dma_base + 0x03);
- outb(0x20, sec_dma_base + 0x01);
- cnt2 = inb(sec_dma_base + 0x03);
- outb(0x21, sec_dma_base + 0x01);
- cnt3 = inb(sec_dma_base + 0x03);
-
- count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0;
-
- /*
- * The 30-bit decrementing counter is read in 4 pieces.
- * Incorrect value may be read when the most significant bytes
- * are changing...
- */
- } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count));
-
- DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n",
- cnt0, cnt1, cnt2, cnt3);
-
- return count;
-}
-
-/**
- * detect_pll_input_clock - Detect the PLL input clock in Hz.
- * @dma_base: for the port address
- * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
- */
-static long detect_pll_input_clock(unsigned long dma_base)
-{
- ktime_t start_time, end_time;
- long start_count, end_count;
- long pll_input, usec_elapsed;
- u8 scr1;
-
- start_count = read_counter(dma_base);
- start_time = ktime_get();
-
- /* Start the test mode */
- outb(0x01, dma_base + 0x01);
- scr1 = inb(dma_base + 0x03);
- DBG("scr1[%02X]\n", scr1);
- outb(scr1 | 0x40, dma_base + 0x03);
-
- /* Let the counter run for 10 ms. */
- mdelay(10);
-
- end_count = read_counter(dma_base);
- end_time = ktime_get();
-
- /* Stop the test mode */
- outb(0x01, dma_base + 0x01);
- scr1 = inb(dma_base + 0x03);
- DBG("scr1[%02X]\n", scr1);
- outb(scr1 & ~0x40, dma_base + 0x03);
-
- /*
- * Calculate the input clock in Hz
- * (the clock counter is 30 bit wide and counts down)
- */
- usec_elapsed = ktime_us_delta(end_time, start_time);
- pll_input = ((start_count - end_count) & 0x3fffffff) / 10 *
- (10000000 / usec_elapsed);
-
- DBG("start[%ld] end[%ld]\n", start_count, end_count);
-
- return pll_input;
-}
-
-#ifdef CONFIG_PPC_PMAC
-static void apple_kiwi_init(struct pci_dev *pdev)
-{
- struct device_node *np = pci_device_to_OF_node(pdev);
- u8 conf;
-
- if (np == NULL || !of_device_is_compatible(np, "kiwi-root"))
- return;
-
- if (pdev->revision >= 0x03) {
- /* Setup chip magic config stuff (from darwin) */
- pci_read_config_byte (pdev, 0x40, &conf);
- pci_write_config_byte(pdev, 0x40, (conf | 0x01));
- }
-}
-#endif /* CONFIG_PPC_PMAC */
-
-static int init_chipset_pdcnew(struct pci_dev *dev)
-{
- const char *name = DRV_NAME;
- unsigned long dma_base = pci_resource_start(dev, 4);
- unsigned long sec_dma_base = dma_base + 0x08;
- long pll_input, pll_output, ratio;
- int f, r;
- u8 pll_ctl0, pll_ctl1;
-
- if (dma_base == 0)
- return -EFAULT;
-
-#ifdef CONFIG_PPC_PMAC
- apple_kiwi_init(dev);
-#endif
-
- /* Calculate the required PLL output frequency */
- switch(max_dma_rate(dev)) {
- case 4: /* it's 133 MHz for Ultra133 chips */
- pll_output = 133333333;
- break;
- case 3: /* and 100 MHz for Ultra100 chips */
- default:
- pll_output = 100000000;
- break;
- }
-
- /*
- * Detect PLL input clock.
- * On some systems, where PCI bus is running at non-standard clock rate
- * (e.g. 25 or 40 MHz), we have to adjust the cycle time.
- * PDC20268 and newer chips employ PLL circuit to help correct timing
- * registers setting.
- */
- pll_input = detect_pll_input_clock(dma_base);
- printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n",
- name, pci_name(dev), pll_input / 1000);
-
- /* Sanity check */
- if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
- printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!"
- "\n", name, pci_name(dev), pll_input);
- goto out;
- }
-
-#ifdef DEBUG
- DBG("pll_output is %ld Hz\n", pll_output);
-
- /* Show the current clock value of PLL control register
- * (maybe already configured by the BIOS)
- */
- outb(0x02, sec_dma_base + 0x01);
- pll_ctl0 = inb(sec_dma_base + 0x03);
- outb(0x03, sec_dma_base + 0x01);
- pll_ctl1 = inb(sec_dma_base + 0x03);
-
- DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
-#endif
-
- /*
- * Calculate the ratio of F, R and NO
- * POUT = (F + 2) / (( R + 2) * NO)
- */
- ratio = pll_output / (pll_input / 1000);
- if (ratio < 8600L) { /* 8.6x */
- /* Using NO = 0x01, R = 0x0d */
- r = 0x0d;
- } else if (ratio < 12900L) { /* 12.9x */
- /* Using NO = 0x01, R = 0x08 */
- r = 0x08;
- } else if (ratio < 16100L) { /* 16.1x */
- /* Using NO = 0x01, R = 0x06 */
- r = 0x06;
- } else if (ratio < 64000L) { /* 64x */
- r = 0x00;
- } else {
- /* Invalid ratio */
- printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n",
- name, pci_name(dev), ratio);
- goto out;
- }
-
- f = (ratio * (r + 2)) / 1000 - 2;
-
- DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio);
-
- if (unlikely(f < 0 || f > 127)) {
- /* Invalid F */
- printk(KERN_ERR "%s %s: F[%d] invalid!\n",
- name, pci_name(dev), f);
- goto out;
- }
-
- pll_ctl0 = (u8) f;
- pll_ctl1 = (u8) r;
-
- DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
-
- outb(0x02, sec_dma_base + 0x01);
- outb(pll_ctl0, sec_dma_base + 0x03);
- outb(0x03, sec_dma_base + 0x01);
- outb(pll_ctl1, sec_dma_base + 0x03);
-
- /* Wait the PLL circuit to be stable */
- mdelay(30);
-
-#ifdef DEBUG
- /*
- * Show the current clock value of PLL control register
- */
- outb(0x02, sec_dma_base + 0x01);
- pll_ctl0 = inb(sec_dma_base + 0x03);
- outb(0x03, sec_dma_base + 0x01);
- pll_ctl1 = inb(sec_dma_base + 0x03);
-
- DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
-#endif
-
- out:
- return 0;
-}
-
-static struct pci_dev *pdc20270_get_dev2(struct pci_dev *dev)
-{
- struct pci_dev *dev2;
-
- dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1,
- PCI_FUNC(dev->devfn)));
-
- if (dev2 &&
- dev2->vendor == dev->vendor &&
- dev2->device == dev->device) {
-
- if (dev2->irq != dev->irq) {
- dev2->irq = dev->irq;
- printk(KERN_INFO DRV_NAME " %s: PCI config space "
- "interrupt fixed\n", pci_name(dev));
- }
-
- return dev2;
- }
-
- return NULL;
-}
-
-static const struct ide_port_ops pdcnew_port_ops = {
- .set_pio_mode = pdcnew_set_pio_mode,
- .set_dma_mode = pdcnew_set_dma_mode,
- .resetproc = pdcnew_reset,
- .cable_detect = pdcnew_cable_detect,
-};
-
-#define DECLARE_PDCNEW_DEV(udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_pdcnew, \
- .port_ops = &pdcnew_port_ops, \
- .host_flags = IDE_HFLAG_POST_SET_MODE | \
- IDE_HFLAG_ERROR_STOPS_FIFO | \
- IDE_HFLAG_OFF_BOARD, \
- .pio_mask = ATA_PIO4, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- }
-
-static const struct ide_port_info pdcnew_chipsets[] = {
- /* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5),
- /* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6),
-};
-
-/**
- * pdc202new_init_one - called when a pdc202xx is found
- * @dev: the pdc202new device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data];
- struct pci_dev *bridge = dev->bus->self;
-
- if (dev->device == PCI_DEVICE_ID_PROMISE_20270 && bridge &&
- bridge->vendor == PCI_VENDOR_ID_DEC &&
- bridge->device == PCI_DEVICE_ID_DEC_21150) {
- struct pci_dev *dev2;
-
- if (PCI_SLOT(dev->devfn) & 2)
- return -ENODEV;
-
- dev2 = pdc20270_get_dev2(dev);
-
- if (dev2) {
- int ret = ide_pci_init_two(dev, dev2, d, NULL);
- if (ret < 0)
- pci_dev_put(dev2);
- return ret;
- }
- }
-
- if (dev->device == PCI_DEVICE_ID_PROMISE_20276 && bridge &&
- bridge->vendor == PCI_VENDOR_ID_INTEL &&
- (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
- bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller,"
- " skipping\n", pci_name(dev));
- return -ENODEV;
- }
-
- return ide_pci_init_one(dev, d, NULL);
-}
-
-static void pdc202new_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
- ide_pci_remove(dev);
- pci_dev_put(dev2);
-}
-
-static const struct pci_device_id pdc202new_pci_tbl[] = {
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 0 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);
-
-static struct pci_driver pdc202new_pci_driver = {
- .name = "Promise_IDE",
- .id_table = pdc202new_pci_tbl,
- .probe = pdc202new_init_one,
- .remove = pdc202new_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init pdc202new_ide_init(void)
-{
- return ide_pci_register_driver(&pdc202new_pci_driver);
-}
-
-static void __exit pdc202new_ide_exit(void)
-{
- pci_unregister_driver(&pdc202new_pci_driver);
-}
-
-module_init(pdc202new_ide_init);
-module_exit(pdc202new_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
-MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
deleted file mode 100644
index 5248ac064e6e..000000000000
--- a/drivers/ide/pdc202xx_old.c
+++ /dev/null
@@ -1,362 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1998-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc.
- * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
- *
- * Portions Copyright (C) 1999 Promise Technology, Inc.
- * Author: Frank Tiernan (frankt@...mise.com)
- * Released under terms of General Public License
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/blkdev.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "pdc202xx_old"
-
-static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 drive_pci = 0x60 + (drive->dn << 2);
- const u8 speed = drive->dma_mode;
-
- u8 AP = 0, BP = 0, CP = 0;
- u8 TA = 0, TB = 0, TC = 0;
-
- pci_read_config_byte(dev, drive_pci, &AP);
- pci_read_config_byte(dev, drive_pci + 1, &BP);
- pci_read_config_byte(dev, drive_pci + 2, &CP);
-
- switch(speed) {
- case XFER_UDMA_5:
- case XFER_UDMA_4: TB = 0x20; TC = 0x01; break;
- case XFER_UDMA_2: TB = 0x20; TC = 0x01; break;
- case XFER_UDMA_3:
- case XFER_UDMA_1: TB = 0x40; TC = 0x02; break;
- case XFER_UDMA_0:
- case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break;
- case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break;
- case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break;
- case XFER_PIO_4: TA = 0x01; TB = 0x04; break;
- case XFER_PIO_3: TA = 0x02; TB = 0x06; break;
- case XFER_PIO_2: TA = 0x03; TB = 0x08; break;
- case XFER_PIO_1: TA = 0x05; TB = 0x0C; break;
- case XFER_PIO_0:
- default: TA = 0x09; TB = 0x13; break;
- }
-
- if (speed < XFER_SW_DMA_0) {
- /*
- * preserve SYNC_INT / ERDDY_EN bits while clearing
- * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
- */
- AP &= ~0x3f;
- if (ide_pio_need_iordy(drive, speed - XFER_PIO_0))
- AP |= 0x20; /* set IORDY_EN bit */
- if (drive->media == ide_disk)
- AP |= 0x10; /* set Prefetch_EN bit */
- /* clear PB[4:0] bits of register B */
- BP &= ~0x1f;
- pci_write_config_byte(dev, drive_pci, AP | TA);
- pci_write_config_byte(dev, drive_pci + 1, BP | TB);
- } else {
- /* clear MB[2:0] bits of register B */
- BP &= ~0xe0;
- /* clear MC[3:0] bits of register C */
- CP &= ~0x0f;
- pci_write_config_byte(dev, drive_pci + 1, BP | TB);
- pci_write_config_byte(dev, drive_pci + 2, CP | TC);
- }
-}
-
-static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- pdc202xx_set_mode(hwif, drive);
-}
-
-static int pdc202xx_test_irq(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long high_16 = pci_resource_start(dev, 4);
- u8 sc1d = inb(high_16 + 0x1d);
-
- if (hwif->channel) {
- /*
- * bit 7: error, bit 6: interrupting,
- * bit 5: FIFO full, bit 4: FIFO empty
- */
- return (sc1d & 0x40) ? 1 : 0;
- } else {
- /*
- * bit 3: error, bit 2: interrupting,
- * bit 1: FIFO full, bit 0: FIFO empty
- */
- return (sc1d & 0x04) ? 1 : 0;
- }
-}
-
-static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
-
- pci_read_config_word(dev, 0x50, &CIS);
-
- return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-/*
- * Set the control register to use the 66MHz system
- * clock for UDMA 3/4/5 mode operation when necessary.
- *
- * FIXME: this register is shared by both channels, some locking is needed
- *
- * It may also be possible to leave the 66MHz clock on
- * and readjust the timing parameters.
- */
-static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
-{
- unsigned long clock_reg = hwif->extra_base + 0x01;
- u8 clock = inb(clock_reg);
-
- outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
-}
-
-static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
-{
- unsigned long clock_reg = hwif->extra_base + 0x01;
- u8 clock = inb(clock_reg);
-
- outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
-}
-
-static void pdc2026x_init_hwif(ide_hwif_t *hwif)
-{
- pdc_old_disable_66MHz_clock(hwif);
-}
-
-static void pdc202xx_dma_start(ide_drive_t *drive)
-{
- if (drive->current_speed > XFER_UDMA_2)
- pdc_old_enable_66MHz_clock(drive->hwif);
- if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->rq;
- unsigned long high_16 = hwif->extra_base - 16;
- unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
- u32 word_count = 0;
- u8 clock = inb(high_16 + 0x11);
-
- outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
- word_count = (blk_rq_sectors(rq) << 8);
- word_count = (rq_data_dir(rq) == READ) ?
- word_count | 0x05000000 :
- word_count | 0x06000000;
- outl(word_count, atapi_reg);
- }
- ide_dma_start(drive);
-}
-
-static int pdc202xx_dma_end(ide_drive_t *drive)
-{
- if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
- ide_hwif_t *hwif = drive->hwif;
- unsigned long high_16 = hwif->extra_base - 16;
- unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
- u8 clock = 0;
-
- outl(0, atapi_reg); /* zero out extra */
- clock = inb(high_16 + 0x11);
- outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11);
- }
- if (drive->current_speed > XFER_UDMA_2)
- pdc_old_disable_66MHz_clock(drive->hwif);
- return ide_dma_end(drive);
-}
-
-static int init_chipset_pdc202xx(struct pci_dev *dev)
-{
- unsigned long dmabase = pci_resource_start(dev, 4);
- u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
-
- if (dmabase == 0)
- goto out;
-
- udma_speed_flag = inb(dmabase | 0x1f);
- primary_mode = inb(dmabase | 0x1a);
- secondary_mode = inb(dmabase | 0x1b);
- printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \
- "Primary %s Mode " \
- "Secondary %s Mode.\n", pci_name(dev),
- (udma_speed_flag & 1) ? "EN" : "DIS",
- (primary_mode & 1) ? "MASTER" : "PCI",
- (secondary_mode & 1) ? "MASTER" : "PCI" );
-
- if (!(udma_speed_flag & 1)) {
- printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
- pci_name(dev), udma_speed_flag,
- (udma_speed_flag|1));
- outb(udma_speed_flag | 1, dmabase | 0x1f);
- printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN");
- }
-out:
- return 0;
-}
-
-static void pdc202ata4_fixup_irq(struct pci_dev *dev, const char *name)
-{
- if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) {
- u8 irq = 0, irq2 = 0;
- pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
- /* 0xbc */
- pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2);
- if (irq != irq2) {
- pci_write_config_byte(dev,
- (PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */
- printk(KERN_INFO "%s %s: PCI config space interrupt "
- "mirror fixed\n", name, pci_name(dev));
- }
- }
-}
-
-#define IDE_HFLAGS_PDC202XX \
- (IDE_HFLAG_ERROR_STOPS_FIFO | \
- IDE_HFLAG_OFF_BOARD)
-
-static const struct ide_port_ops pdc20246_port_ops = {
- .set_pio_mode = pdc202xx_set_pio_mode,
- .set_dma_mode = pdc202xx_set_mode,
- .test_irq = pdc202xx_test_irq,
-};
-
-static const struct ide_port_ops pdc2026x_port_ops = {
- .set_pio_mode = pdc202xx_set_pio_mode,
- .set_dma_mode = pdc202xx_set_mode,
- .test_irq = pdc202xx_test_irq,
- .cable_detect = pdc2026x_cable_detect,
-};
-
-static const struct ide_dma_ops pdc2026x_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = pdc202xx_dma_start,
- .dma_end = pdc202xx_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-#define DECLARE_PDC2026X_DEV(udma, sectors) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_pdc202xx, \
- .init_hwif = pdc2026x_init_hwif, \
- .port_ops = &pdc2026x_port_ops, \
- .dma_ops = &pdc2026x_dma_ops, \
- .host_flags = IDE_HFLAGS_PDC202XX, \
- .pio_mask = ATA_PIO4, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- .max_sectors = sectors, \
- }
-
-static const struct ide_port_info pdc202xx_chipsets[] = {
- { /* 0: PDC20246 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_pdc202xx,
- .port_ops = &pdc20246_port_ops,
- .dma_ops = &sff_dma_ops,
- .host_flags = IDE_HFLAGS_PDC202XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
- },
-
- /* 1: PDC2026{2,3} */
- DECLARE_PDC2026X_DEV(ATA_UDMA4, 0),
- /* 2: PDC2026{5,7}: UDMA5, limit LBA48 requests to 256 sectors */
- DECLARE_PDC2026X_DEV(ATA_UDMA5, 256),
-};
-
-/**
- * pdc202xx_init_one - called when a PDC202xx is found
- * @dev: the pdc202xx device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int pdc202xx_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- const struct ide_port_info *d;
- u8 idx = id->driver_data;
-
- d = &pdc202xx_chipsets[idx];
-
- if (idx < 2)
- pdc202ata4_fixup_irq(dev, d->name);
-
- if (dev->vendor == PCI_DEVICE_ID_PROMISE_20265) {
- struct pci_dev *bridge = dev->bus->self;
-
- if (bridge &&
- bridge->vendor == PCI_VENDOR_ID_INTEL &&
- (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
- bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO DRV_NAME " %s: skipping Promise "
- "PDC20265 attached to I2O RAID controller\n",
- pci_name(dev));
- return -ENODEV;
- }
- }
-
- return ide_pci_init_one(dev, d, NULL);
-}
-
-static const struct pci_device_id pdc202xx_pci_tbl[] = {
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
-
-static struct pci_driver pdc202xx_pci_driver = {
- .name = "Promise_Old_IDE",
- .id_table = pdc202xx_pci_tbl,
- .probe = pdc202xx_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init pdc202xx_ide_init(void)
-{
- return ide_pci_register_driver(&pdc202xx_pci_driver);
-}
-
-static void __exit pdc202xx_ide_exit(void)
-{
- pci_unregister_driver(&pdc202xx_pci_driver);
-}
-
-module_init(pdc202xx_ide_init);
-module_exit(pdc202xx_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
deleted file mode 100644
index a671cead6ae7..000000000000
--- a/drivers/ide/piix.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
- * Copyright (C) 1998-2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2003 Red Hat
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@...sta.com>
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Documentation:
- *
- * Publicly available from Intel web site. Errata documentation
- * is also publicly available. As an aide to anyone hacking on this
- * driver the list of errata that are relevant is below.going back to
- * PIIX4. Older device documentation is now a bit tricky to find.
- *
- * Errata of note:
- *
- * Unfixable
- * PIIX4 errata #9 - Only on ultra obscure hw
- * ICH3 errata #13 - Not observed to affect real hw
- * by Intel
- *
- * Things we must deal with
- * PIIX4 errata #10 - BM IDE hang with non UDMA
- * (must stop/start dma to recover)
- * 440MX errata #15 - As PIIX4 errata #10
- * PIIX4 errata #15 - Must not read control registers
- * during a PIO transfer
- * 440MX errata #13 - As PIIX4 errata #15
- * ICH2 errata #21 - DMA mode 0 doesn't work right
- * ICH0/1 errata #55 - As ICH2 errata #21
- * ICH2 spec c #9 - Extra operations needed to handle
- * drive hotswap [NOT YET SUPPORTED]
- * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
- * and must be dword aligned
- * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
- *
- * Should have been BIOS fixed:
- * 450NX: errata #19 - DMA hangs on old 450NX
- * 450NX: errata #20 - DMA hangs on old 450NX
- * 450NX: errata #25 - Corruption with DMA on old 450NX
- * ICH3 errata #15 - IDE deadlock under high load
- * (BIOS must set dev 31 fn 0 bit 23)
- * ICH3 errata #18 - Don't use native mode
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "piix"
-
-static int no_piix_dma;
-
-/**
- * piix_set_pio_mode - set host controller for PIO mode
- * @port: port
- * @drive: drive
- *
- * Set the interface PIO mode based upon the settings done by AMI BIOS.
- */
-
-static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int is_slave = drive->dn & 1;
- int master_port = hwif->channel ? 0x42 : 0x40;
- int slave_port = 0x44;
- unsigned long flags;
- u16 master_data;
- u8 slave_data;
- static DEFINE_SPINLOCK(tune_lock);
- int control = 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /* ISP RTC */
- static const u8 timings[][2]= {
- { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- /*
- * Master vs slave is synchronized above us but the slave register is
- * shared by the two hwifs so the corner case of two slave timeouts in
- * parallel must be locked.
- */
- spin_lock_irqsave(&tune_lock, flags);
- pci_read_config_word(dev, master_port, &master_data);
-
- if (pio > 1)
- control |= 1; /* Programmable timing on */
- if (drive->media == ide_disk)
- control |= 4; /* Prefetch, post write */
- if (ide_pio_need_iordy(drive, pio))
- control |= 2; /* IORDY */
- if (is_slave) {
- master_data |= 0x4000;
- master_data &= ~0x0070;
- if (pio > 1) {
- /* Set PPE, IE and TIME */
- master_data |= control << 4;
- }
- pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data &= hwif->channel ? 0x0f : 0xf0;
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
- (hwif->channel ? 4 : 0);
- } else {
- master_data &= ~0x3307;
- if (pio > 1) {
- /* enable PPE, IE and TIME */
- master_data |= control;
- }
- master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
- }
- pci_write_config_word(dev, master_port, master_data);
- if (is_slave)
- pci_write_config_byte(dev, slave_port, slave_data);
- spin_unlock_irqrestore(&tune_lock, flags);
-}
-
-/**
- * piix_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Set a PIIX host controller to the desired DMA mode. This involves
- * programming the right timing data into the PCI configuration space.
- */
-
-static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 maslave = hwif->channel ? 0x42 : 0x40;
- int a_speed = 3 << (drive->dn * 4);
- int u_flag = 1 << drive->dn;
- int v_flag = 0x01 << drive->dn;
- int w_flag = 0x10 << drive->dn;
- int u_speed = 0;
- int sitre;
- u16 reg4042, reg4a;
- u8 reg48, reg54, reg55;
- const u8 speed = drive->dma_mode;
-
- pci_read_config_word(dev, maslave, ®4042);
- sitre = (reg4042 & 0x4000) ? 1 : 0;
- pci_read_config_byte(dev, 0x48, ®48);
- pci_read_config_word(dev, 0x4a, ®4a);
- pci_read_config_byte(dev, 0x54, ®54);
- pci_read_config_byte(dev, 0x55, ®55);
-
- if (speed >= XFER_UDMA_0) {
- u8 udma = speed - XFER_UDMA_0;
-
- u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
-
- if (!(reg48 & u_flag))
- pci_write_config_byte(dev, 0x48, reg48 | u_flag);
- if (speed == XFER_UDMA_5) {
- pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
- } else {
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
- }
- if ((reg4a & a_speed) != u_speed)
- pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
- if (speed > XFER_UDMA_2) {
- if (!(reg54 & v_flag))
- pci_write_config_byte(dev, 0x54, reg54 | v_flag);
- } else
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- } else {
- const u8 mwdma_to_pio[] = { 0, 3, 4 };
-
- if (reg48 & u_flag)
- pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
- if (reg4a & a_speed)
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
- if (reg54 & v_flag)
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- if (reg55 & w_flag)
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-
- if (speed >= XFER_MW_DMA_0)
- drive->pio_mode =
- mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
- else
- drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
-
- piix_set_pio_mode(hwif, drive);
- }
-}
-
-/**
- * init_chipset_ich - set up the ICH chipset
- * @dev: PCI device to set up
- *
- * Initialize the PCI device as required. For the ICH this turns
- * out to be nice and simple.
- */
-
-static int init_chipset_ich(struct pci_dev *dev)
-{
- u32 extra = 0;
-
- pci_read_config_dword(dev, 0x54, &extra);
- pci_write_config_dword(dev, 0x54, extra | 0x400);
-
- return 0;
-}
-
-/**
- * ich_clear_irq - clear BMDMA status
- * @drive: IDE drive
- *
- * ICHx contollers set DMA INTR no matter DMA or PIO.
- * BMDMA status might need to be cleared even for
- * PIO interrupts to prevent spurious/lost IRQ.
- */
-static void ich_clear_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat;
-
- /*
- * ide_dma_end() needs BMDMA status for error checking.
- * So, skip clearing BMDMA status here and leave it
- * to ide_dma_end() if this is DMA interrupt.
- */
- if (drive->waiting_for_dma || hwif->dma_base == 0)
- return;
-
- /* clear the INTR & ERROR bits */
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- /* Should we force the bit as well ? */
- outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
-}
-
-struct ich_laptop {
- u16 device;
- u16 subvendor;
- u16 subdevice;
-};
-
-/*
- * List of laptops that use short cables rather than 80 wire
- */
-
-static const struct ich_laptop ich_laptop[] = {
- /* devid, subvendor, subdev */
- { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
- { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
- { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
- { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
- { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
- { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
- { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
- { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
- { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
- { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
- { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
- /* end marker */
- { 0, }
-};
-
-static u8 piix_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- const struct ich_laptop *lap = &ich_laptop[0];
- u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
-
- /* check for specials */
- while (lap->device) {
- if (lap->device == pdev->device &&
- lap->subvendor == pdev->subsystem_vendor &&
- lap->subdevice == pdev->subsystem_device) {
- return ATA_CBL_PATA40_SHORT;
- }
- lap++;
- }
-
- pci_read_config_byte(pdev, 0x54, ®54h);
-
- return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-/**
- * init_hwif_piix - fill in the hwif for the PIIX
- * @hwif: IDE interface
- *
- * Set up the ide_hwif_t for the PIIX interface according to the
- * capabilities of the hardware.
- */
-
-static void init_hwif_piix(ide_hwif_t *hwif)
-{
- if (!hwif->dma_base)
- return;
-
- if (no_piix_dma)
- hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
-}
-
-static const struct ide_port_ops piix_port_ops = {
- .set_pio_mode = piix_set_pio_mode,
- .set_dma_mode = piix_set_dma_mode,
- .cable_detect = piix_cable_detect,
-};
-
-static const struct ide_port_ops ich_port_ops = {
- .set_pio_mode = piix_set_pio_mode,
- .set_dma_mode = piix_set_dma_mode,
- .clear_irq = ich_clear_irq,
- .cable_detect = piix_cable_detect,
-};
-
-#define DECLARE_PIIX_DEV(udma) \
- { \
- .name = DRV_NAME, \
- .init_hwif = init_hwif_piix, \
- .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .port_ops = &piix_port_ops, \
- .pio_mask = ATA_PIO4, \
- .swdma_mask = ATA_SWDMA2_ONLY, \
- .mwdma_mask = ATA_MWDMA12_ONLY, \
- .udma_mask = udma, \
- }
-
-#define DECLARE_ICH_DEV(mwdma, udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_ich, \
- .init_hwif = init_hwif_piix, \
- .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .port_ops = &ich_port_ops, \
- .pio_mask = ATA_PIO4, \
- .swdma_mask = ATA_SWDMA2_ONLY, \
- .mwdma_mask = mwdma, \
- .udma_mask = udma, \
- }
-
-static const struct ide_port_info piix_pci_info[] = {
- /* 0: MPIIX */
- { /*
- * MPIIX actually has only a single IDE channel mapped to
- * the primary or secondary ports depending on the value
- * of the bit 14 of the IDETIM register at offset 0x6c
- */
- .name = DRV_NAME,
- .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
- .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
- /* This is a painful system best to let it self tune for now */
- },
- /* 1: PIIXa/PIIXb/PIIX3 */
- DECLARE_PIIX_DEV(0x00), /* no udma */
- /* 2: PIIX4 */
- DECLARE_PIIX_DEV(ATA_UDMA2),
- /* 3: ICH0 */
- DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2),
- /* 4: ICH */
- DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4),
- /* 5: PIIX4 */
- DECLARE_PIIX_DEV(ATA_UDMA4),
- /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
- DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5),
- /* 7: ICH7/7-R, no MWDMA1 */
- DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5),
-};
-
-/**
- * piix_init_one - called when a PIIX is found
- * @dev: the piix device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL);
-}
-
-/**
- * piix_check_450nx - Check for problem 450NX setup
- *
- * Check for the present of 450NX errata #19 and errata #25. If
- * they are found, disable use of DMA IDE
- */
-
-static void piix_check_450nx(void)
-{
- struct pci_dev *pdev = NULL;
- u16 cfg;
- while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
- {
- /* Look for 450NX PXB. Check for problem configurations
- A PCI quirk checks bit 6 already */
- pci_read_config_word(pdev, 0x41, &cfg);
- /* Only on the original revision: IDE DMA can hang */
- if (pdev->revision == 0x00)
- no_piix_dma = 1;
- /* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if (cfg & (1<<14) && pdev->revision < 5)
- no_piix_dma = 2;
- }
- if(no_piix_dma)
- printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n");
- if(no_piix_dma == 2)
- printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n");
-}
-
-static const struct pci_device_id piix_pci_tbl[] = {
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0), 1 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1), 1 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), 0 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1), 1 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB), 2 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1), 3 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1), 2 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1), 4 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1), 5 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX), 2 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 6 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1), 6 },
-#endif
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
-
-static struct pci_driver piix_pci_driver = {
- .name = "PIIX_IDE",
- .id_table = piix_pci_tbl,
- .probe = piix_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init piix_ide_init(void)
-{
- piix_check_450nx();
- return ide_pci_register_driver(&piix_pci_driver);
-}
-
-static void __exit piix_ide_exit(void)
-{
- pci_unregister_driver(&piix_pci_driver);
-}
-
-module_init(piix_ide_init);
-module_exit(piix_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz");
-MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
deleted file mode 100644
index ea0b064b5f56..000000000000
--- a/drivers/ide/pmac.c
+++ /dev/null
@@ -1,1703 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Support for IDE interfaces on PowerMacs.
- *
- * These IDE interfaces are memory-mapped and have a DBDMA channel
- * for doing DMA.
- *
- * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
- * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
- *
- * Some code taken from drivers/ide/ide-dma.c:
- *
- * Copyright (c) 1995-1998 Mark Lord
- *
- * TODO: - Use pre-calculated (kauai) timing tables all the time and
- * get rid of the "rounded" tables used previously, so we have the
- * same table format for all controllers and can then just have one
- * big table
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/notifier.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/scatterlist.h>
-#include <linux/slab.h>
-
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/dbdma.h>
-#include <asm/ide.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/sections.h>
-#include <asm/irq.h>
-#include <asm/mediabay.h>
-
-#define DRV_NAME "ide-pmac"
-
-#undef IDE_PMAC_DEBUG
-
-#define DMA_WAIT_TIMEOUT 50
-
-typedef struct pmac_ide_hwif {
- unsigned long regbase;
- int irq;
- int kind;
- int aapl_bus_id;
- unsigned broken_dma : 1;
- unsigned broken_dma_warn : 1;
- struct device_node* node;
- struct macio_dev *mdev;
- u32 timings[4];
- volatile u32 __iomem * *kauai_fcr;
- ide_hwif_t *hwif;
-
- /* Those fields are duplicating what is in hwif. We currently
- * can't use the hwif ones because of some assumptions that are
- * beeing done by the generic code about the kind of dma controller
- * and format of the dma table. This will have to be fixed though.
- */
- volatile struct dbdma_regs __iomem * dma_regs;
- struct dbdma_cmd* dma_table_cpu;
-} pmac_ide_hwif_t;
-
-enum {
- controller_ohare, /* OHare based */
- controller_heathrow, /* Heathrow/Paddington */
- controller_kl_ata3, /* KeyLargo ATA-3 */
- controller_kl_ata4, /* KeyLargo ATA-4 */
- controller_un_ata6, /* UniNorth2 ATA-6 */
- controller_k2_ata6, /* K2 ATA-6 */
- controller_sh_ata6, /* Shasta ATA-6 */
-};
-
-static const char* model_name[] = {
- "OHare ATA", /* OHare based */
- "Heathrow ATA", /* Heathrow/Paddington */
- "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
- "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
- "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
- "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
- "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
-};
-
-/*
- * Extra registers, both 32-bit little-endian
- */
-#define IDE_TIMING_CONFIG 0x200
-#define IDE_INTERRUPT 0x300
-
-/* Kauai (U2) ATA has different register setup */
-#define IDE_KAUAI_PIO_CONFIG 0x200
-#define IDE_KAUAI_ULTRA_CONFIG 0x210
-#define IDE_KAUAI_POLL_CONFIG 0x220
-
-/*
- * Timing configuration register definitions
- */
-
-/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
-#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
-#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
-#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
-#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
-
-/* 133Mhz cell, found in shasta.
- * See comments about 100 Mhz Uninorth 2...
- * Note that PIO_MASK and MDMA_MASK seem to overlap
- */
-#define TR_133_PIOREG_PIO_MASK 0xff000fff
-#define TR_133_PIOREG_MDMA_MASK 0x00fff800
-#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
-#define TR_133_UDMAREG_UDMA_EN 0x00000001
-
-/* 100Mhz cell, found in Uninorth 2. I don't have much infos about
- * this one yet, it appears as a pci device (106b/0033) on uninorth
- * internal PCI bus and it's clock is controlled like gem or fw. It
- * appears to be an evolution of keylargo ATA4 with a timing register
- * extended to 2 32bits registers and a similar DBDMA channel. Other
- * registers seem to exist but I can't tell much about them.
- *
- * So far, I'm using pre-calculated tables for this extracted from
- * the values used by the MacOS X driver.
- *
- * The "PIO" register controls PIO and MDMA timings, the "ULTRA"
- * register controls the UDMA timings. At least, it seems bit 0
- * of this one enables UDMA vs. MDMA, and bits 4..7 are the
- * cycle time in units of 10ns. Bits 8..15 are used by I don't
- * know their meaning yet
- */
-#define TR_100_PIOREG_PIO_MASK 0xff000fff
-#define TR_100_PIOREG_MDMA_MASK 0x00fff000
-#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
-#define TR_100_UDMAREG_UDMA_EN 0x00000001
-
-
-/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
- * 40 connector cable and to 4 on 80 connector one.
- * Clock unit is 15ns (66Mhz)
- *
- * 3 Values can be programmed:
- * - Write data setup, which appears to match the cycle time. They
- * also call it DIOW setup.
- * - Ready to pause time (from spec)
- * - Address setup. That one is weird. I don't see where exactly
- * it fits in UDMA cycles, I got it's name from an obscure piece
- * of commented out code in Darwin. They leave it to 0, we do as
- * well, despite a comment that would lead to think it has a
- * min value of 45ns.
- * Apple also add 60ns to the write data setup (or cycle time ?) on
- * reads.
- */
-#define TR_66_UDMA_MASK 0xfff00000
-#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
-#define TR_66_UDMA_ADDRSETUP_MASK 0xe0000000 /* Address setup */
-#define TR_66_UDMA_ADDRSETUP_SHIFT 29
-#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
-#define TR_66_UDMA_RDY2PAUS_SHIFT 25
-#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
-#define TR_66_UDMA_WRDATASETUP_SHIFT 21
-#define TR_66_MDMA_MASK 0x000ffc00
-#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
-#define TR_66_MDMA_RECOVERY_SHIFT 15
-#define TR_66_MDMA_ACCESS_MASK 0x00007c00
-#define TR_66_MDMA_ACCESS_SHIFT 10
-#define TR_66_PIO_MASK 0x000003ff
-#define TR_66_PIO_RECOVERY_MASK 0x000003e0
-#define TR_66_PIO_RECOVERY_SHIFT 5
-#define TR_66_PIO_ACCESS_MASK 0x0000001f
-#define TR_66_PIO_ACCESS_SHIFT 0
-
-/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
- * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
- *
- * The access time and recovery time can be programmed. Some older
- * Darwin code base limit OHare to 150ns cycle time. I decided to do
- * the same here fore safety against broken old hardware ;)
- * The HalfTick bit, when set, adds half a clock (15ns) to the access
- * time and removes one from recovery. It's not supported on KeyLargo
- * implementation afaik. The E bit appears to be set for PIO mode 0 and
- * is used to reach long timings used in this mode.
- */
-#define TR_33_MDMA_MASK 0x003ff800
-#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
-#define TR_33_MDMA_RECOVERY_SHIFT 16
-#define TR_33_MDMA_ACCESS_MASK 0x0000f800
-#define TR_33_MDMA_ACCESS_SHIFT 11
-#define TR_33_MDMA_HALFTICK 0x00200000
-#define TR_33_PIO_MASK 0x000007ff
-#define TR_33_PIO_E 0x00000400
-#define TR_33_PIO_RECOVERY_MASK 0x000003e0
-#define TR_33_PIO_RECOVERY_SHIFT 5
-#define TR_33_PIO_ACCESS_MASK 0x0000001f
-#define TR_33_PIO_ACCESS_SHIFT 0
-
-/*
- * Interrupt register definitions
- */
-#define IDE_INTR_DMA 0x80000000
-#define IDE_INTR_DEVICE 0x40000000
-
-/*
- * FCR Register on Kauai. Not sure what bit 0x4 is ...
- */
-#define KAUAI_FCR_UATA_MAGIC 0x00000004
-#define KAUAI_FCR_UATA_RESET_N 0x00000002
-#define KAUAI_FCR_UATA_ENABLE 0x00000001
-
-/* Rounded Multiword DMA timings
- *
- * I gave up finding a generic formula for all controller
- * types and instead, built tables based on timing values
- * used by Apple in Darwin's implementation.
- */
-struct mdma_timings_t {
- int accessTime;
- int recoveryTime;
- int cycleTime;
-};
-
-struct mdma_timings_t mdma_timings_33[] =
-{
- { 240, 240, 480 },
- { 180, 180, 360 },
- { 135, 135, 270 },
- { 120, 120, 240 },
- { 105, 105, 210 },
- { 90, 90, 180 },
- { 75, 75, 150 },
- { 75, 45, 120 },
- { 0, 0, 0 }
-};
-
-struct mdma_timings_t mdma_timings_33k[] =
-{
- { 240, 240, 480 },
- { 180, 180, 360 },
- { 150, 150, 300 },
- { 120, 120, 240 },
- { 90, 120, 210 },
- { 90, 90, 180 },
- { 90, 60, 150 },
- { 90, 30, 120 },
- { 0, 0, 0 }
-};
-
-struct mdma_timings_t mdma_timings_66[] =
-{
- { 240, 240, 480 },
- { 180, 180, 360 },
- { 135, 135, 270 },
- { 120, 120, 240 },
- { 105, 105, 210 },
- { 90, 90, 180 },
- { 90, 75, 165 },
- { 75, 45, 120 },
- { 0, 0, 0 }
-};
-
-/* KeyLargo ATA-4 Ultra DMA timings (rounded) */
-struct {
- int addrSetup; /* ??? */
- int rdy2pause;
- int wrDataSetup;
-} kl66_udma_timings[] =
-{
- { 0, 180, 120 }, /* Mode 0 */
- { 0, 150, 90 }, /* 1 */
- { 0, 120, 60 }, /* 2 */
- { 0, 90, 45 }, /* 3 */
- { 0, 90, 30 } /* 4 */
-};
-
-/* UniNorth 2 ATA/100 timings */
-struct kauai_timing {
- int cycle_time;
- u32 timing_reg;
-};
-
-static struct kauai_timing kauai_pio_timings[] =
-{
- { 930 , 0x08000fff },
- { 600 , 0x08000a92 },
- { 383 , 0x0800060f },
- { 360 , 0x08000492 },
- { 330 , 0x0800048f },
- { 300 , 0x080003cf },
- { 270 , 0x080003cc },
- { 240 , 0x0800038b },
- { 239 , 0x0800030c },
- { 180 , 0x05000249 },
- { 120 , 0x04000148 },
- { 0 , 0 },
-};
-
-static struct kauai_timing kauai_mdma_timings[] =
-{
- { 1260 , 0x00fff000 },
- { 480 , 0x00618000 },
- { 360 , 0x00492000 },
- { 270 , 0x0038e000 },
- { 240 , 0x0030c000 },
- { 210 , 0x002cb000 },
- { 180 , 0x00249000 },
- { 150 , 0x00209000 },
- { 120 , 0x00148000 },
- { 0 , 0 },
-};
-
-static struct kauai_timing kauai_udma_timings[] =
-{
- { 120 , 0x000070c0 },
- { 90 , 0x00005d80 },
- { 60 , 0x00004a60 },
- { 45 , 0x00003a50 },
- { 30 , 0x00002a30 },
- { 20 , 0x00002921 },
- { 0 , 0 },
-};
-
-static struct kauai_timing shasta_pio_timings[] =
-{
- { 930 , 0x08000fff },
- { 600 , 0x0A000c97 },
- { 383 , 0x07000712 },
- { 360 , 0x040003cd },
- { 330 , 0x040003cd },
- { 300 , 0x040003cd },
- { 270 , 0x040003cd },
- { 240 , 0x040003cd },
- { 239 , 0x040003cd },
- { 180 , 0x0400028b },
- { 120 , 0x0400010a },
- { 0 , 0 },
-};
-
-static struct kauai_timing shasta_mdma_timings[] =
-{
- { 1260 , 0x00fff000 },
- { 480 , 0x00820800 },
- { 360 , 0x00820800 },
- { 270 , 0x00820800 },
- { 240 , 0x00820800 },
- { 210 , 0x00820800 },
- { 180 , 0x00820800 },
- { 150 , 0x0028b000 },
- { 120 , 0x001ca000 },
- { 0 , 0 },
-};
-
-static struct kauai_timing shasta_udma133_timings[] =
-{
- { 120 , 0x00035901, },
- { 90 , 0x000348b1, },
- { 60 , 0x00033881, },
- { 45 , 0x00033861, },
- { 30 , 0x00033841, },
- { 20 , 0x00033031, },
- { 15 , 0x00033021, },
- { 0 , 0 },
-};
-
-
-static inline u32
-kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
-{
- int i;
-
- for (i=0; table[i].cycle_time; i++)
- if (cycle_time > table[i+1].cycle_time)
- return table[i].timing_reg;
- BUG();
- return 0;
-}
-
-/* allow up to 256 DBDMA commands per xfer */
-#define MAX_DCMDS 256
-
-/*
- * Wait 1s for disk to answer on IDE bus after a hard reset
- * of the device (via GPIO/FCR).
- *
- * Some devices seem to "pollute" the bus even after dropping
- * the BSY bit (typically some combo drives slave on the UDMA
- * bus) after a hard reset. Since we hard reset all drives on
- * KeyLargo ATA66, we have to keep that delay around. I may end
- * up not hard resetting anymore on these and keep the delay only
- * for older interfaces instead (we have to reset when coming
- * from MacOS...) --BenH.
- */
-#define IDE_WAKEUP_DELAY (1*HZ)
-
-static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *);
-
-#define PMAC_IDE_REG(x) \
- ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
-
-/*
- * Apply the timings of the proper unit (master/slave) to the shared
- * timing register when selecting that unit. This version is for
- * ASICs with a single timing register
- */
-static void pmac_ide_apply_timings(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
-
- if (drive->dn & 1)
- writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG));
- else
- writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG));
- (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
-}
-
-/*
- * Apply the timings of the proper unit (master/slave) to the shared
- * timing register when selecting that unit. This version is for
- * ASICs with a dual timing register (Kauai)
- */
-static void pmac_ide_kauai_apply_timings(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
-
- if (drive->dn & 1) {
- writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
- writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
- } else {
- writel(pmif->timings[0], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
- writel(pmif->timings[2], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
- }
- (void)readl(PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
-}
-
-/*
- * Force an update of controller timing values for a given drive
- */
-static void
-pmac_ide_do_update_timings(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
-
- if (pmif->kind == controller_sh_ata6 ||
- pmif->kind == controller_un_ata6 ||
- pmif->kind == controller_k2_ata6)
- pmac_ide_kauai_apply_timings(drive);
- else
- pmac_ide_apply_timings(drive);
-}
-
-static void pmac_dev_select(ide_drive_t *drive)
-{
- pmac_ide_apply_timings(drive);
-
- writeb(drive->select | ATA_DEVICE_OBS,
- (void __iomem *)drive->hwif->io_ports.device_addr);
-}
-
-static void pmac_kauai_dev_select(ide_drive_t *drive)
-{
- pmac_ide_kauai_apply_timings(drive);
-
- writeb(drive->select | ATA_DEVICE_OBS,
- (void __iomem *)drive->hwif->io_ports.device_addr);
-}
-
-static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
-{
- writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
- (void)readl((void __iomem *)(hwif->io_ports.data_addr
- + IDE_TIMING_CONFIG));
-}
-
-static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl)
-{
- writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
- (void)readl((void __iomem *)(hwif->io_ports.data_addr
- + IDE_TIMING_CONFIG));
-}
-
-/*
- * Old tuning functions (called on hdparm -p), sets up drive PIO timings
- */
-static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio);
- u32 *timings, t;
- unsigned accessTicks, recTicks;
- unsigned accessTime, recTime;
- unsigned int cycle_time;
-
- /* which drive is it ? */
- timings = &pmif->timings[drive->dn & 1];
- t = *timings;
-
- cycle_time = ide_pio_cycle_time(drive, pio);
-
- switch (pmif->kind) {
- case controller_sh_ata6: {
- /* 133Mhz cell */
- u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
- t = (t & ~TR_133_PIOREG_PIO_MASK) | tr;
- break;
- }
- case controller_un_ata6:
- case controller_k2_ata6: {
- /* 100Mhz cell */
- u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
- t = (t & ~TR_100_PIOREG_PIO_MASK) | tr;
- break;
- }
- case controller_kl_ata4:
- /* 66Mhz cell */
- recTime = cycle_time - tim->active - tim->setup;
- recTime = max(recTime, 150U);
- accessTime = tim->active;
- accessTime = max(accessTime, 150U);
- accessTicks = SYSCLK_TICKS_66(accessTime);
- accessTicks = min(accessTicks, 0x1fU);
- recTicks = SYSCLK_TICKS_66(recTime);
- recTicks = min(recTicks, 0x1fU);
- t = (t & ~TR_66_PIO_MASK) |
- (accessTicks << TR_66_PIO_ACCESS_SHIFT) |
- (recTicks << TR_66_PIO_RECOVERY_SHIFT);
- break;
- default: {
- /* 33Mhz cell */
- int ebit = 0;
- recTime = cycle_time - tim->active - tim->setup;
- recTime = max(recTime, 150U);
- accessTime = tim->active;
- accessTime = max(accessTime, 150U);
- accessTicks = SYSCLK_TICKS(accessTime);
- accessTicks = min(accessTicks, 0x1fU);
- accessTicks = max(accessTicks, 4U);
- recTicks = SYSCLK_TICKS(recTime);
- recTicks = min(recTicks, 0x1fU);
- recTicks = max(recTicks, 5U) - 4;
- if (recTicks > 9) {
- recTicks--; /* guess, but it's only for PIO0, so... */
- ebit = 1;
- }
- t = (t & ~TR_33_PIO_MASK) |
- (accessTicks << TR_33_PIO_ACCESS_SHIFT) |
- (recTicks << TR_33_PIO_RECOVERY_SHIFT);
- if (ebit)
- t |= TR_33_PIO_E;
- break;
- }
- }
-
-#ifdef IDE_PMAC_DEBUG
- printk(KERN_ERR "%s: Set PIO timing for mode %d, reg: 0x%08x\n",
- drive->name, pio, *timings);
-#endif
-
- *timings = t;
- pmac_ide_do_update_timings(drive);
-}
-
-/*
- * Calculate KeyLargo ATA/66 UDMA timings
- */
-static int
-set_timings_udma_ata4(u32 *timings, u8 speed)
-{
- unsigned rdyToPauseTicks, wrDataSetupTicks, addrTicks;
-
- if (speed > XFER_UDMA_4)
- return 1;
-
- rdyToPauseTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].rdy2pause);
- wrDataSetupTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].wrDataSetup);
- addrTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].addrSetup);
-
- *timings = ((*timings) & ~(TR_66_UDMA_MASK | TR_66_MDMA_MASK)) |
- (wrDataSetupTicks << TR_66_UDMA_WRDATASETUP_SHIFT) |
- (rdyToPauseTicks << TR_66_UDMA_RDY2PAUS_SHIFT) |
- (addrTicks <<TR_66_UDMA_ADDRSETUP_SHIFT) |
- TR_66_UDMA_EN;
-#ifdef IDE_PMAC_DEBUG
- printk(KERN_ERR "ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n",
- speed & 0xf, *timings);
-#endif
-
- return 0;
-}
-
-/*
- * Calculate Kauai ATA/100 UDMA timings
- */
-static int
-set_timings_udma_ata6(u32 *pio_timings, u32 *ultra_timings, u8 speed)
-{
- struct ide_timing *t = ide_timing_find_mode(speed);
- u32 tr;
-
- if (speed > XFER_UDMA_5 || t == NULL)
- return 1;
- tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma);
- *ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr;
- *ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN;
-
- return 0;
-}
-
-/*
- * Calculate Shasta ATA/133 UDMA timings
- */
-static int
-set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed)
-{
- struct ide_timing *t = ide_timing_find_mode(speed);
- u32 tr;
-
- if (speed > XFER_UDMA_6 || t == NULL)
- return 1;
- tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma);
- *ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr;
- *ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN;
-
- return 0;
-}
-
-/*
- * Calculate MDMA timings for all cells
- */
-static void
-set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
- u8 speed)
-{
- u16 *id = drive->id;
- int cycleTime, accessTime = 0, recTime = 0;
- unsigned accessTicks, recTicks;
- struct mdma_timings_t* tm = NULL;
- int i;
-
- /* Get default cycle time for mode */
- switch(speed & 0xf) {
- case 0: cycleTime = 480; break;
- case 1: cycleTime = 150; break;
- case 2: cycleTime = 120; break;
- default:
- BUG();
- break;
- }
-
- /* Check if drive provides explicit DMA cycle time */
- if ((id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_DMA_TIME])
- cycleTime = max_t(int, id[ATA_ID_EIDE_DMA_TIME], cycleTime);
-
- /* OHare limits according to some old Apple sources */
- if ((intf_type == controller_ohare) && (cycleTime < 150))
- cycleTime = 150;
- /* Get the proper timing array for this controller */
- switch(intf_type) {
- case controller_sh_ata6:
- case controller_un_ata6:
- case controller_k2_ata6:
- break;
- case controller_kl_ata4:
- tm = mdma_timings_66;
- break;
- case controller_kl_ata3:
- tm = mdma_timings_33k;
- break;
- default:
- tm = mdma_timings_33;
- break;
- }
- if (tm != NULL) {
- /* Lookup matching access & recovery times */
- i = -1;
- for (;;) {
- if (tm[i+1].cycleTime < cycleTime)
- break;
- i++;
- }
- cycleTime = tm[i].cycleTime;
- accessTime = tm[i].accessTime;
- recTime = tm[i].recoveryTime;
-
-#ifdef IDE_PMAC_DEBUG
- printk(KERN_ERR "%s: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n",
- drive->name, cycleTime, accessTime, recTime);
-#endif
- }
- switch(intf_type) {
- case controller_sh_ata6: {
- /* 133Mhz cell */
- u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime);
- *timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr;
- *timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN;
- }
- break;
- case controller_un_ata6:
- case controller_k2_ata6: {
- /* 100Mhz cell */
- u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime);
- *timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr;
- *timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN;
- }
- break;
- case controller_kl_ata4:
- /* 66Mhz cell */
- accessTicks = SYSCLK_TICKS_66(accessTime);
- accessTicks = min(accessTicks, 0x1fU);
- accessTicks = max(accessTicks, 0x1U);
- recTicks = SYSCLK_TICKS_66(recTime);
- recTicks = min(recTicks, 0x1fU);
- recTicks = max(recTicks, 0x3U);
- /* Clear out mdma bits and disable udma */
- *timings = ((*timings) & ~(TR_66_MDMA_MASK | TR_66_UDMA_MASK)) |
- (accessTicks << TR_66_MDMA_ACCESS_SHIFT) |
- (recTicks << TR_66_MDMA_RECOVERY_SHIFT);
- break;
- case controller_kl_ata3:
- /* 33Mhz cell on KeyLargo */
- accessTicks = SYSCLK_TICKS(accessTime);
- accessTicks = max(accessTicks, 1U);
- accessTicks = min(accessTicks, 0x1fU);
- accessTime = accessTicks * IDE_SYSCLK_NS;
- recTicks = SYSCLK_TICKS(recTime);
- recTicks = max(recTicks, 1U);
- recTicks = min(recTicks, 0x1fU);
- *timings = ((*timings) & ~TR_33_MDMA_MASK) |
- (accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
- (recTicks << TR_33_MDMA_RECOVERY_SHIFT);
- break;
- default: {
- /* 33Mhz cell on others */
- int halfTick = 0;
- int origAccessTime = accessTime;
- int origRecTime = recTime;
-
- accessTicks = SYSCLK_TICKS(accessTime);
- accessTicks = max(accessTicks, 1U);
- accessTicks = min(accessTicks, 0x1fU);
- accessTime = accessTicks * IDE_SYSCLK_NS;
- recTicks = SYSCLK_TICKS(recTime);
- recTicks = max(recTicks, 2U) - 1;
- recTicks = min(recTicks, 0x1fU);
- recTime = (recTicks + 1) * IDE_SYSCLK_NS;
- if ((accessTicks > 1) &&
- ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) &&
- ((recTime - IDE_SYSCLK_NS/2) >= origRecTime)) {
- halfTick = 1;
- accessTicks--;
- }
- *timings = ((*timings) & ~TR_33_MDMA_MASK) |
- (accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
- (recTicks << TR_33_MDMA_RECOVERY_SHIFT);
- if (halfTick)
- *timings |= TR_33_MDMA_HALFTICK;
- }
- }
-#ifdef IDE_PMAC_DEBUG
- printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n",
- drive->name, speed & 0xf, *timings);
-#endif
-}
-
-static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- int ret = 0;
- u32 *timings, *timings2, tl[2];
- u8 unit = drive->dn & 1;
- const u8 speed = drive->dma_mode;
-
- timings = &pmif->timings[unit];
- timings2 = &pmif->timings[unit+2];
-
- /* Copy timings to local image */
- tl[0] = *timings;
- tl[1] = *timings2;
-
- if (speed >= XFER_UDMA_0) {
- if (pmif->kind == controller_kl_ata4)
- ret = set_timings_udma_ata4(&tl[0], speed);
- else if (pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6)
- ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
- else if (pmif->kind == controller_sh_ata6)
- ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
- else
- ret = -1;
- } else
- set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-
- if (ret)
- return;
-
- /* Apply timings to controller */
- *timings = tl[0];
- *timings2 = tl[1];
-
- pmac_ide_do_update_timings(drive);
-}
-
-/*
- * Blast some well known "safe" values to the timing registers at init or
- * wakeup from sleep time, before we do real calculation
- */
-static void
-sanitize_timings(pmac_ide_hwif_t *pmif)
-{
- unsigned int value, value2 = 0;
-
- switch(pmif->kind) {
- case controller_sh_ata6:
- value = 0x0a820c97;
- value2 = 0x00033031;
- break;
- case controller_un_ata6:
- case controller_k2_ata6:
- value = 0x08618a92;
- value2 = 0x00002921;
- break;
- case controller_kl_ata4:
- value = 0x0008438c;
- break;
- case controller_kl_ata3:
- value = 0x00084526;
- break;
- case controller_heathrow:
- case controller_ohare:
- default:
- value = 0x00074526;
- break;
- }
- pmif->timings[0] = pmif->timings[1] = value;
- pmif->timings[2] = pmif->timings[3] = value2;
-}
-
-static int on_media_bay(pmac_ide_hwif_t *pmif)
-{
- return pmif->mdev && pmif->mdev->media_bay != NULL;
-}
-
-/* Suspend call back, should be called after the child devices
- * have actually been suspended
- */
-static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif)
-{
- /* We clear the timings */
- pmif->timings[0] = 0;
- pmif->timings[1] = 0;
-
- disable_irq(pmif->irq);
-
- /* The media bay will handle itself just fine */
- if (on_media_bay(pmif))
- return 0;
-
- /* Kauai has bus control FCRs directly here */
- if (pmif->kauai_fcr) {
- u32 fcr = readl(pmif->kauai_fcr);
- fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
- writel(fcr, pmif->kauai_fcr);
- }
-
- /* Disable the bus on older machines and the cell on kauai */
- ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id,
- 0);
-
- return 0;
-}
-
-/* Resume call back, should be called before the child devices
- * are resumed
- */
-static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
-{
- /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
- if (!on_media_bay(pmif)) {
- ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
- ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1);
- msleep(10);
- ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 0);
-
- /* Kauai has it different */
- if (pmif->kauai_fcr) {
- u32 fcr = readl(pmif->kauai_fcr);
- fcr |= KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE;
- writel(fcr, pmif->kauai_fcr);
- }
-
- msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
- }
-
- /* Sanitize drive timings */
- sanitize_timings(pmif);
-
- enable_irq(pmif->irq);
-
- return 0;
-}
-
-static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
-{
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- struct device_node *np = pmif->node;
- const char *cable = of_get_property(np, "cable-type", NULL);
- struct device_node *root = of_find_node_by_path("/");
- const char *model = of_get_property(root, "model", NULL);
-
- of_node_put(root);
- /* Get cable type from device-tree. */
- if (cable && !strncmp(cable, "80-", 3)) {
- /* Some drives fail to detect 80c cable in PowerBook */
- /* These machine use proprietary short IDE cable anyway */
- if (!strncmp(model, "PowerBook", 9))
- return ATA_CBL_PATA40_SHORT;
- else
- return ATA_CBL_PATA80;
- }
-
- /*
- * G5's seem to have incorrect cable type in device-tree.
- * Let's assume they have a 80 conductor cable, this seem
- * to be always the case unless the user mucked around.
- */
- if (of_device_is_compatible(np, "K2-UATA") ||
- of_device_is_compatible(np, "shasta-ata"))
- return ATA_CBL_PATA80;
-
- return ATA_CBL_PATA40;
-}
-
-static void pmac_ide_init_dev(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
-
- if (on_media_bay(pmif)) {
- if (check_media_bay(pmif->mdev->media_bay) == MB_CD) {
- drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
- return;
- }
- drive->dev_flags |= IDE_DFLAG_NOPROBE;
- }
-}
-
-static const struct ide_tp_ops pmac_tp_ops = {
- .exec_command = pmac_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = pmac_write_devctl,
-
- .dev_select = pmac_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_tp_ops pmac_ata6_tp_ops = {
- .exec_command = pmac_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = pmac_write_devctl,
-
- .dev_select = pmac_kauai_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_port_ops pmac_ide_ata4_port_ops = {
- .init_dev = pmac_ide_init_dev,
- .set_pio_mode = pmac_ide_set_pio_mode,
- .set_dma_mode = pmac_ide_set_dma_mode,
- .cable_detect = pmac_ide_cable_detect,
-};
-
-static const struct ide_port_ops pmac_ide_port_ops = {
- .init_dev = pmac_ide_init_dev,
- .set_pio_mode = pmac_ide_set_pio_mode,
- .set_dma_mode = pmac_ide_set_dma_mode,
-};
-
-static const struct ide_dma_ops pmac_dma_ops;
-
-static const struct ide_port_info pmac_port_info = {
- .name = DRV_NAME,
- .init_dma = pmac_ide_init_dma,
- .chipset = ide_pmac,
- .tp_ops = &pmac_tp_ops,
- .port_ops = &pmac_ide_port_ops,
- .dma_ops = &pmac_dma_ops,
- .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_MMIO |
- IDE_HFLAG_UNMASK_IRQS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-/*
- * Setup, register & probe an IDE channel driven by this driver, this is
- * called by one of the 2 probe functions (macio or PCI).
- */
-static int pmac_ide_setup_device(pmac_ide_hwif_t *pmif, struct ide_hw *hw)
-{
- struct device_node *np = pmif->node;
- const int *bidp;
- struct ide_host *host;
- struct ide_hw *hws[] = { hw };
- struct ide_port_info d = pmac_port_info;
- int rc;
-
- pmif->broken_dma = pmif->broken_dma_warn = 0;
- if (of_device_is_compatible(np, "shasta-ata")) {
- pmif->kind = controller_sh_ata6;
- d.tp_ops = &pmac_ata6_tp_ops;
- d.port_ops = &pmac_ide_ata4_port_ops;
- d.udma_mask = ATA_UDMA6;
- } else if (of_device_is_compatible(np, "kauai-ata")) {
- pmif->kind = controller_un_ata6;
- d.tp_ops = &pmac_ata6_tp_ops;
- d.port_ops = &pmac_ide_ata4_port_ops;
- d.udma_mask = ATA_UDMA5;
- } else if (of_device_is_compatible(np, "K2-UATA")) {
- pmif->kind = controller_k2_ata6;
- d.tp_ops = &pmac_ata6_tp_ops;
- d.port_ops = &pmac_ide_ata4_port_ops;
- d.udma_mask = ATA_UDMA5;
- } else if (of_device_is_compatible(np, "keylargo-ata")) {
- if (of_node_name_eq(np, "ata-4")) {
- pmif->kind = controller_kl_ata4;
- d.port_ops = &pmac_ide_ata4_port_ops;
- d.udma_mask = ATA_UDMA4;
- } else
- pmif->kind = controller_kl_ata3;
- } else if (of_device_is_compatible(np, "heathrow-ata")) {
- pmif->kind = controller_heathrow;
- } else {
- pmif->kind = controller_ohare;
- pmif->broken_dma = 1;
- }
-
- bidp = of_get_property(np, "AAPL,bus-id", NULL);
- pmif->aapl_bus_id = bidp ? *bidp : 0;
-
- /* On Kauai-type controllers, we make sure the FCR is correct */
- if (pmif->kauai_fcr)
- writel(KAUAI_FCR_UATA_MAGIC |
- KAUAI_FCR_UATA_RESET_N |
- KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr);
-
- /* Make sure we have sane timings */
- sanitize_timings(pmif);
-
- /* If we are on a media bay, wait for it to settle and lock it */
- if (pmif->mdev)
- lock_media_bay(pmif->mdev->media_bay);
-
- host = ide_host_alloc(&d, hws, 1);
- if (host == NULL) {
- rc = -ENOMEM;
- goto bail;
- }
- pmif->hwif = host->ports[0];
-
- if (on_media_bay(pmif)) {
- /* Fixup bus ID for media bay */
- if (!bidp)
- pmif->aapl_bus_id = 1;
- } else if (pmif->kind == controller_ohare) {
- /* The code below is having trouble on some ohare machines
- * (timing related ?). Until I can put my hand on one of these
- * units, I keep the old way
- */
- ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
- } else {
- /* This is necessary to enable IDE when net-booting */
- ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
- ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
- msleep(10);
- ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 0);
- msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
- }
-
- printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
- "bus ID %d%s, irq %d\n", model_name[pmif->kind],
- pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
- on_media_bay(pmif) ? " (mediabay)" : "", hw->irq);
-
- rc = ide_host_register(host, &d, hws);
- if (rc)
- pmif->hwif = NULL;
-
- if (pmif->mdev)
- unlock_media_bay(pmif->mdev->media_bay);
-
- bail:
- if (rc && host)
- ide_host_free(host);
- return rc;
-}
-
-static void pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
-{
- int i;
-
- for (i = 0; i < 8; ++i)
- hw->io_ports_array[i] = base + i * 0x10;
-
- hw->io_ports.ctl_addr = base + 0x160;
-}
-
-/*
- * Attach to a macio probed interface
- */
-static int pmac_ide_macio_attach(struct macio_dev *mdev,
- const struct of_device_id *match)
-{
- void __iomem *base;
- unsigned long regbase;
- pmac_ide_hwif_t *pmif;
- int irq, rc;
- struct ide_hw hw;
-
- pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
- if (pmif == NULL)
- return -ENOMEM;
-
- if (macio_resource_count(mdev) == 0) {
- printk(KERN_WARNING "ide-pmac: no address for %pOF\n",
- mdev->ofdev.dev.of_node);
- rc = -ENXIO;
- goto out_free_pmif;
- }
-
- /* Request memory resource for IO ports */
- if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) {
- printk(KERN_ERR "ide-pmac: can't request MMIO resource for "
- "%pOF!\n", mdev->ofdev.dev.of_node);
- rc = -EBUSY;
- goto out_free_pmif;
- }
-
- /* XXX This is bogus. Should be fixed in the registry by checking
- * the kind of host interrupt controller, a bit like gatwick
- * fixes in irq.c. That works well enough for the single case
- * where that happens though...
- */
- if (macio_irq_count(mdev) == 0) {
- printk(KERN_WARNING "ide-pmac: no intrs for device %pOF, using "
- "13\n", mdev->ofdev.dev.of_node);
- irq = irq_create_mapping(NULL, 13);
- } else
- irq = macio_irq(mdev, 0);
-
- base = ioremap(macio_resource_start(mdev, 0), 0x400);
- regbase = (unsigned long) base;
-
- pmif->mdev = mdev;
- pmif->node = mdev->ofdev.dev.of_node;
- pmif->regbase = regbase;
- pmif->irq = irq;
- pmif->kauai_fcr = NULL;
-
- if (macio_resource_count(mdev) >= 2) {
- if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
- printk(KERN_WARNING "ide-pmac: can't request DMA "
- "resource for %pOF!\n",
- mdev->ofdev.dev.of_node);
- else
- pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
- } else
- pmif->dma_regs = NULL;
-
- dev_set_drvdata(&mdev->ofdev.dev, pmif);
-
- memset(&hw, 0, sizeof(hw));
- pmac_ide_init_ports(&hw, pmif->regbase);
- hw.irq = irq;
- hw.dev = &mdev->bus->pdev->dev;
- hw.parent = &mdev->ofdev.dev;
-
- rc = pmac_ide_setup_device(pmif, &hw);
- if (rc != 0) {
- /* The inteface is released to the common IDE layer */
- dev_set_drvdata(&mdev->ofdev.dev, NULL);
- iounmap(base);
- if (pmif->dma_regs) {
- iounmap(pmif->dma_regs);
- macio_release_resource(mdev, 1);
- }
- macio_release_resource(mdev, 0);
- kfree(pmif);
- }
-
- return rc;
-
-out_free_pmif:
- kfree(pmif);
- return rc;
-}
-
-static int
-pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
-{
- pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev);
- int rc = 0;
-
- if (mesg.event != mdev->ofdev.dev.power.power_state.event
- && (mesg.event & PM_EVENT_SLEEP)) {
- rc = pmac_ide_do_suspend(pmif);
- if (rc == 0)
- mdev->ofdev.dev.power.power_state = mesg;
- }
-
- return rc;
-}
-
-static int
-pmac_ide_macio_resume(struct macio_dev *mdev)
-{
- pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev);
- int rc = 0;
-
- if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) {
- rc = pmac_ide_do_resume(pmif);
- if (rc == 0)
- mdev->ofdev.dev.power.power_state = PMSG_ON;
- }
-
- return rc;
-}
-
-/*
- * Attach to a PCI probed interface
- */
-static int pmac_ide_pci_attach(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- struct device_node *np;
- pmac_ide_hwif_t *pmif;
- void __iomem *base;
- unsigned long rbase, rlen;
- int rc;
- struct ide_hw hw;
-
- np = pci_device_to_OF_node(pdev);
- if (np == NULL) {
- printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n");
- return -ENODEV;
- }
-
- pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
- if (pmif == NULL)
- return -ENOMEM;
-
- if (pci_enable_device(pdev)) {
- printk(KERN_WARNING "ide-pmac: Can't enable PCI device for "
- "%pOF\n", np);
- rc = -ENXIO;
- goto out_free_pmif;
- }
- pci_set_master(pdev);
-
- if (pci_request_regions(pdev, "Kauai ATA")) {
- printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for "
- "%pOF\n", np);
- rc = -ENXIO;
- goto out_free_pmif;
- }
-
- pmif->mdev = NULL;
- pmif->node = np;
-
- rbase = pci_resource_start(pdev, 0);
- rlen = pci_resource_len(pdev, 0);
-
- base = ioremap(rbase, rlen);
- pmif->regbase = (unsigned long) base + 0x2000;
- pmif->dma_regs = base + 0x1000;
- pmif->kauai_fcr = base;
- pmif->irq = pdev->irq;
-
- pci_set_drvdata(pdev, pmif);
-
- memset(&hw, 0, sizeof(hw));
- pmac_ide_init_ports(&hw, pmif->regbase);
- hw.irq = pdev->irq;
- hw.dev = &pdev->dev;
-
- rc = pmac_ide_setup_device(pmif, &hw);
- if (rc != 0) {
- /* The inteface is released to the common IDE layer */
- iounmap(base);
- pci_release_regions(pdev);
- kfree(pmif);
- }
-
- return rc;
-
-out_free_pmif:
- kfree(pmif);
- return rc;
-}
-
-static int
-pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
-{
- pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev);
- int rc = 0;
-
- if (mesg.event != pdev->dev.power.power_state.event
- && (mesg.event & PM_EVENT_SLEEP)) {
- rc = pmac_ide_do_suspend(pmif);
- if (rc == 0)
- pdev->dev.power.power_state = mesg;
- }
-
- return rc;
-}
-
-static int
-pmac_ide_pci_resume(struct pci_dev *pdev)
-{
- pmac_ide_hwif_t *pmif = pci_get_drvdata(pdev);
- int rc = 0;
-
- if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
- rc = pmac_ide_do_resume(pmif);
- if (rc == 0)
- pdev->dev.power.power_state = PMSG_ON;
- }
-
- return rc;
-}
-
-#ifdef CONFIG_PMAC_MEDIABAY
-static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state)
-{
- pmac_ide_hwif_t *pmif = dev_get_drvdata(&mdev->ofdev.dev);
-
- switch(mb_state) {
- case MB_CD:
- if (!pmif->hwif->present)
- ide_port_scan(pmif->hwif);
- break;
- default:
- if (pmif->hwif->present)
- ide_port_unregister_devices(pmif->hwif);
- }
-}
-#endif /* CONFIG_PMAC_MEDIABAY */
-
-
-static struct of_device_id pmac_ide_macio_match[] =
-{
- {
- .name = "IDE",
- },
- {
- .name = "ATA",
- },
- {
- .type = "ide",
- },
- {
- .type = "ata",
- },
- {},
-};
-
-static struct macio_driver pmac_ide_macio_driver =
-{
- .driver = {
- .name = "ide-pmac",
- .owner = THIS_MODULE,
- .of_match_table = pmac_ide_macio_match,
- },
- .probe = pmac_ide_macio_attach,
- .suspend = pmac_ide_macio_suspend,
- .resume = pmac_ide_macio_resume,
-#ifdef CONFIG_PMAC_MEDIABAY
- .mediabay_event = pmac_ide_macio_mb_event,
-#endif
-};
-
-static const struct pci_device_id pmac_ide_pci_match[] = {
- { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
- { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
- { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
- { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
- { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
- {},
-};
-
-static struct pci_driver pmac_ide_pci_driver = {
- .name = "ide-pmac",
- .id_table = pmac_ide_pci_match,
- .probe = pmac_ide_pci_attach,
- .suspend = pmac_ide_pci_suspend,
- .resume = pmac_ide_pci_resume,
-};
-MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match);
-
-int __init pmac_ide_probe(void)
-{
- int error;
-
- if (!machine_is(powermac))
- return -ENODEV;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
- error = pci_register_driver(&pmac_ide_pci_driver);
- if (error)
- goto out;
- error = macio_register_driver(&pmac_ide_macio_driver);
- if (error) {
- pci_unregister_driver(&pmac_ide_pci_driver);
- goto out;
- }
-#else
- error = macio_register_driver(&pmac_ide_macio_driver);
- if (error)
- goto out;
- error = pci_register_driver(&pmac_ide_pci_driver);
- if (error) {
- macio_unregister_driver(&pmac_ide_macio_driver);
- goto out;
- }
-#endif
-out:
- return error;
-}
-
-/*
- * pmac_ide_build_dmatable builds the DBDMA command list
- * for a transfer and sets the DBDMA channel to point to it.
- */
-static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- struct dbdma_cmd *table;
- volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
- struct scatterlist *sg;
- int wr = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
- int i = cmd->sg_nents, count = 0;
-
- /* DMA table is already aligned */
- table = (struct dbdma_cmd *) pmif->dma_table_cpu;
-
- /* Make sure DMA controller is stopped (necessary ?) */
- writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma->control);
- while (readl(&dma->status) & RUN)
- udelay(1);
-
- /* Build DBDMA commands list */
- sg = hwif->sg_table;
- while (i && sg_dma_len(sg)) {
- u32 cur_addr;
- u32 cur_len;
-
- cur_addr = sg_dma_address(sg);
- cur_len = sg_dma_len(sg);
-
- if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
- if (pmif->broken_dma_warn == 0) {
- printk(KERN_WARNING "%s: DMA on non aligned address, "
- "switching to PIO on Ohare chipset\n", drive->name);
- pmif->broken_dma_warn = 1;
- }
- return 0;
- }
- while (cur_len) {
- unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
-
- if (count++ >= MAX_DCMDS) {
- printk(KERN_WARNING "%s: DMA table too small\n",
- drive->name);
- return 0;
- }
- table->command = cpu_to_le16(wr? OUTPUT_MORE: INPUT_MORE);
- table->req_count = cpu_to_le16(tc);
- table->phy_addr = cpu_to_le32(cur_addr);
- table->cmd_dep = 0;
- table->xfer_status = 0;
- table->res_count = 0;
- cur_addr += tc;
- cur_len -= tc;
- ++table;
- }
- sg = sg_next(sg);
- i--;
- }
-
- /* convert the last command to an input/output last command */
- if (count) {
- table[-1].command = cpu_to_le16(wr? OUTPUT_LAST: INPUT_LAST);
- /* add the stop command to the end of the list */
- memset(table, 0, sizeof(struct dbdma_cmd));
- table->command = cpu_to_le16(DBDMA_STOP);
- mb();
- writel(hwif->dmatable_dma, &dma->cmdptr);
- return 1;
- }
-
- printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
-
- return 0; /* revert to PIO for this request */
-}
-
-/*
- * Prepare a DMA transfer. We build the DMA table, adjust the timings for
- * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
- */
-static int pmac_ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);
- u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
-
- if (pmac_ide_build_dmatable(drive, cmd) == 0)
- return 1;
-
- /* Apple adds 60ns to wrDataSetup on reads */
- if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) {
- writel(pmif->timings[unit] + (write ? 0 : 0x00800000UL),
- PMAC_IDE_REG(IDE_TIMING_CONFIG));
- (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
- }
-
- return 0;
-}
-
-/*
- * Kick the DMA controller into life after the DMA command has been issued
- * to the drive.
- */
-static void
-pmac_ide_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
-
- dma = pmif->dma_regs;
-
- writel((RUN << 16) | RUN, &dma->control);
- /* Make sure it gets to the controller right now */
- (void)readl(&dma->control);
-}
-
-/*
- * After a DMA transfer, make sure the controller is stopped
- */
-static int
-pmac_ide_dma_end (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
- u32 dstat;
-
- dstat = readl(&dma->status);
- writel(((RUN|WAKE|DEAD) << 16), &dma->control);
-
- /* verify good dma status. we don't check for ACTIVE beeing 0. We should...
- * in theory, but with ATAPI decices doing buffer underruns, that would
- * cause us to disable DMA, which isn't what we want
- */
- return (dstat & (RUN|DEAD)) != RUN;
-}
-
-/*
- * Check out that the interrupt we got was for us. We can't always know this
- * for sure with those Apple interfaces (well, we could on the recent ones but
- * that's not implemented yet), on the other hand, we don't have shared interrupts
- * so it's not really a problem
- */
-static int
-pmac_ide_dma_test_irq (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
- unsigned long status, timeout;
-
- /* We have to things to deal with here:
- *
- * - The dbdma won't stop if the command was started
- * but completed with an error without transferring all
- * datas. This happens when bad blocks are met during
- * a multi-block transfer.
- *
- * - The dbdma fifo hasn't yet finished flushing to
- * to system memory when the disk interrupt occurs.
- *
- */
-
- /* If ACTIVE is cleared, the STOP command have passed and
- * transfer is complete.
- */
- status = readl(&dma->status);
- if (!(status & ACTIVE))
- return 1;
-
- /* If dbdma didn't execute the STOP command yet, the
- * active bit is still set. We consider that we aren't
- * sharing interrupts (which is hopefully the case with
- * those controllers) and so we just try to flush the
- * channel for pending data in the fifo
- */
- udelay(1);
- writel((FLUSH << 16) | FLUSH, &dma->control);
- timeout = 0;
- for (;;) {
- udelay(1);
- status = readl(&dma->status);
- if ((status & FLUSH) == 0)
- break;
- if (++timeout > 100) {
- printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n",
- hwif->index);
- break;
- }
- }
- return 1;
-}
-
-static void pmac_ide_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static void
-pmac_ide_dma_lost_irq (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
- unsigned long status = readl(&dma->status);
-
- printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
-}
-
-static const struct ide_dma_ops pmac_dma_ops = {
- .dma_host_set = pmac_ide_dma_host_set,
- .dma_setup = pmac_ide_dma_setup,
- .dma_start = pmac_ide_dma_start,
- .dma_end = pmac_ide_dma_end,
- .dma_test_irq = pmac_ide_dma_test_irq,
- .dma_lost_irq = pmac_ide_dma_lost_irq,
-};
-
-/*
- * Allocate the data structures needed for using DMA with an interface
- * and fill the proper list of functions pointers
- */
-static int pmac_ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- pmac_ide_hwif_t *pmif = dev_get_drvdata(hwif->gendev.parent);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- /* We won't need pci_dev if we switch to generic consistent
- * DMA routines ...
- */
- if (dev == NULL || pmif->dma_regs == 0)
- return -ENODEV;
- /*
- * Allocate space for the DBDMA commands.
- * The +2 is +1 for the stop command and +1 to allow for
- * aligning the start address to a multiple of 16 bytes.
- */
- pmif->dma_table_cpu = dma_alloc_coherent(&dev->dev,
- (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
- &hwif->dmatable_dma, GFP_KERNEL);
- if (pmif->dma_table_cpu == NULL) {
- printk(KERN_ERR "%s: unable to allocate DMA command list\n",
- hwif->name);
- return -ENOMEM;
- }
-
- hwif->sg_max_nents = MAX_DCMDS;
-
- return 0;
-}
-
-module_init(pmac_ide_probe);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
deleted file mode 100644
index ab79b6289464..000000000000
--- a/drivers/ide/qd65xx.c
+++ /dev/null
@@ -1,446 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1996-2001 Linus Torvalds & author (see below)
- */
-
-/*
- * Version 0.03 Cleaned auto-tune, added probe
- * Version 0.04 Added second channel tuning
- * Version 0.05 Enhanced tuning ; added qd6500 support
- * Version 0.06 Added dos driver's list
- * Version 0.07 Second channel bug fix
- *
- * QDI QD6500/QD6580 EIDE controller fast support
- *
- * To activate controller support, use "ide0=qd65xx"
- */
-
-/*
- * Rewritten from the work of Colten Edwards <pje120@...usask.ca> by
- * Samuel Thibault <samuel.thibault@...-lyon.org>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#define DRV_NAME "qd65xx"
-
-#include "qd65xx.h"
-
-/*
- * I/O ports are 0x30-0x31 (and 0x32-0x33 for qd6580)
- * or 0xb0-0xb1 (and 0xb2-0xb3 for qd6580)
- * -- qd6500 is a single IDE interface
- * -- qd6580 is a dual IDE interface
- *
- * More research on qd6580 being done by willmore@....mot.com (David)
- * More Information given by Petr Soucek (petr@...ton.cz)
- * http://www.ryston.cz/petr/vlb
- */
-
-/*
- * base: Timer1
- *
- *
- * base+0x01: Config (R/O)
- *
- * bit 0: ide baseport: 1 = 0x1f0 ; 0 = 0x170 (only useful for qd6500)
- * bit 1: qd65xx baseport: 1 = 0xb0 ; 0 = 0x30
- * bit 2: ID3: bus speed: 1 = <=33MHz ; 0 = >33MHz
- * bit 3: qd6500: 1 = disabled, 0 = enabled
- * qd6580: 1
- * upper nibble:
- * qd6500: 1100
- * qd6580: either 1010 or 0101
- *
- *
- * base+0x02: Timer2 (qd6580 only)
- *
- *
- * base+0x03: Control (qd6580 only)
- *
- * bits 0-3 must always be set 1
- * bit 4 must be set 1, but is set 0 by dos driver while measuring vlb clock
- * bit 0 : 1 = Only primary port enabled : channel 0 for hda, channel 1 for hdb
- * 0 = Primary and Secondary ports enabled : channel 0 for hda & hdb
- * channel 1 for hdc & hdd
- * bit 1 : 1 = only disks on primary port
- * 0 = disks & ATAPI devices on primary port
- * bit 2-4 : always 0
- * bit 5 : status, but of what ?
- * bit 6 : always set 1 by dos driver
- * bit 7 : set 1 for non-ATAPI devices on primary port
- * (maybe read-ahead and post-write buffer ?)
- */
-
-static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */
-
-/*
- * qd65xx_select:
- *
- * This routine is invoked to prepare for access to a given drive.
- */
-
-static void qd65xx_dev_select(ide_drive_t *drive)
-{
- u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) |
- (QD_TIMREG(drive) & 0x02);
-
- if (timings[index] != QD_TIMING(drive))
- outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
-
- outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
-}
-
-/*
- * qd6500_compute_timing
- *
- * computes the timing value where
- * lower nibble represents active time, in count of VLB clocks
- * upper nibble represents recovery time, in count of VLB clocks
- */
-
-static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
-{
- int clk = ide_vlb_clk ? ide_vlb_clk : 50;
- u8 act_cyc, rec_cyc;
-
- if (clk <= 33) {
- act_cyc = 9 - IDE_IN(active_time * clk / 1000 + 1, 2, 9);
- rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15);
- } else {
- act_cyc = 8 - IDE_IN(active_time * clk / 1000 + 1, 1, 8);
- rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18);
- }
-
- return (rec_cyc << 4) | 0x08 | act_cyc;
-}
-
-/*
- * qd6580_compute_timing
- *
- * idem for qd6580
- */
-
-static u8 qd6580_compute_timing (int active_time, int recovery_time)
-{
- int clk = ide_vlb_clk ? ide_vlb_clk : 50;
- u8 act_cyc, rec_cyc;
-
- act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17);
- rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15);
-
- return (rec_cyc << 4) | act_cyc;
-}
-
-/*
- * qd_find_disk_type
- *
- * tries to find timing from dos driver's table
- */
-
-static int qd_find_disk_type (ide_drive_t *drive,
- int *active_time, int *recovery_time)
-{
- struct qd65xx_timing_s *p;
- char *m = (char *)&drive->id[ATA_ID_PROD];
- char model[ATA_ID_PROD_LEN];
-
- if (*m == 0)
- return 0;
-
- strncpy(model, m, ATA_ID_PROD_LEN);
- ide_fixstring(model, ATA_ID_PROD_LEN, 1); /* byte-swap */
-
- for (p = qd65xx_timing ; p->offset != -1 ; p++) {
- if (!strncmp(p->model, model+p->offset, 4)) {
- printk(KERN_DEBUG "%s: listed !\n", drive->name);
- *active_time = p->active;
- *recovery_time = p->recovery;
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * qd_set_timing:
- *
- * records the timing
- */
-
-static void qd_set_timing (ide_drive_t *drive, u8 timing)
-{
- unsigned long data = (unsigned long)ide_get_drivedata(drive);
-
- data &= 0xff00;
- data |= timing;
- ide_set_drivedata(drive, (void *)data);
-
- printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
-}
-
-static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- u16 *id = drive->id;
- int active_time = 175;
- int recovery_time = 415; /* worst case values from the dos driver */
-
- /* FIXME: use drive->pio_mode value */
- if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
- (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
- id[ATA_ID_EIDE_PIO] >= 240) {
- printk(KERN_INFO "%s: PIO mode%d\n", drive->name,
- id[ATA_ID_OLD_PIO_MODES] & 0xff);
- active_time = 110;
- recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120;
- }
-
- qd_set_timing(drive, qd6500_compute_timing(drive->hwif,
- active_time, recovery_time));
-}
-
-static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- unsigned int cycle_time;
- int active_time = 175;
- int recovery_time = 415; /* worst case values from the dos driver */
- u8 base = (hwif->config_data & 0xff00) >> 8;
-
- if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
- cycle_time = ide_pio_cycle_time(drive, pio);
-
- switch (pio) {
- case 0: break;
- case 3:
- if (cycle_time >= 110) {
- active_time = 86;
- recovery_time = cycle_time - 102;
- } else
- printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
- break;
- case 4:
- if (cycle_time >= 69) {
- active_time = 70;
- recovery_time = cycle_time - 61;
- } else
- printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
- break;
- default:
- if (cycle_time >= 180) {
- active_time = 110;
- recovery_time = cycle_time - 120;
- } else {
- active_time = t->active;
- recovery_time = cycle_time - active_time;
- }
- }
- printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio);
- }
-
- if (!hwif->channel && drive->media != ide_disk) {
- outb(0x5f, QD_CONTROL_PORT);
- printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO "
- "and post-write buffer on %s.\n",
- drive->name, hwif->name);
- }
-
- qd_set_timing(drive, qd6580_compute_timing(active_time, recovery_time));
-}
-
-/*
- * qd_testreg
- *
- * tests if the given port is a register
- */
-
-static int __init qd_testreg(int port)
-{
- unsigned long flags;
- u8 savereg, readreg;
-
- local_irq_save(flags);
- savereg = inb_p(port);
- outb_p(QD_TESTVAL, port); /* safe value */
- readreg = inb_p(port);
- outb(savereg, port);
- local_irq_restore(flags);
-
- if (savereg == QD_TESTVAL) {
- printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n");
- printk(KERN_ERR "Please contact maintainers to tell about your hardware\n");
- printk(KERN_ERR "Assuming qd65xx is not present.\n");
- return 1;
- }
-
- return (readreg != QD_TESTVAL);
-}
-
-static void __init qd6500_init_dev(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 base = (hwif->config_data & 0xff00) >> 8;
- u8 config = QD_CONFIG(hwif);
-
- ide_set_drivedata(drive, (void *)QD6500_DEF_DATA);
-}
-
-static void __init qd6580_init_dev(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long t1, t2;
- u8 base = (hwif->config_data & 0xff00) >> 8;
- u8 config = QD_CONFIG(hwif);
-
- if (hwif->host_flags & IDE_HFLAG_SINGLE) {
- t1 = QD6580_DEF_DATA;
- t2 = QD6580_DEF_DATA2;
- } else
- t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
-
- ide_set_drivedata(drive, (void *)((drive->dn & 1) ? t2 : t1));
-}
-
-static const struct ide_tp_ops qd65xx_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = qd65xx_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_port_ops qd6500_port_ops = {
- .init_dev = qd6500_init_dev,
- .set_pio_mode = qd6500_set_pio_mode,
-};
-
-static const struct ide_port_ops qd6580_port_ops = {
- .init_dev = qd6580_init_dev,
- .set_pio_mode = qd6580_set_pio_mode,
-};
-
-static const struct ide_port_info qd65xx_port_info __initconst = {
- .name = DRV_NAME,
- .tp_ops = &qd65xx_tp_ops,
- .chipset = ide_qd65xx,
- .host_flags = IDE_HFLAG_IO_32BIT |
- IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
-};
-
-/*
- * qd_probe:
- *
- * looks at the specified baseport, and if qd found, registers & initialises it
- * return 1 if another qd may be probed
- */
-
-static int __init qd_probe(int base)
-{
- int rc;
- u8 config, unit, control;
- struct ide_port_info d = qd65xx_port_info;
-
- config = inb(QD_CONFIG_PORT);
-
- if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) )
- return -ENODEV;
-
- unit = ! (config & QD_CONFIG_IDE_BASEPORT);
-
- if (unit)
- d.host_flags |= IDE_HFLAG_QD_2ND_PORT;
-
- switch (config & 0xf0) {
- case QD_CONFIG_QD6500:
- if (qd_testreg(base))
- return -ENODEV; /* bad register */
-
- if (config & QD_CONFIG_DISABLED) {
- printk(KERN_WARNING "qd6500 is disabled !\n");
- return -ENODEV;
- }
-
- printk(KERN_NOTICE "qd6500 at %#x\n", base);
- printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
- config, QD_ID3);
-
- d.port_ops = &qd6500_port_ops;
- d.host_flags |= IDE_HFLAG_SINGLE;
- break;
- case QD_CONFIG_QD6580_A:
- case QD_CONFIG_QD6580_B:
- if (qd_testreg(base) || qd_testreg(base + 0x02))
- return -ENODEV; /* bad registers */
-
- control = inb(QD_CONTROL_PORT);
-
- printk(KERN_NOTICE "qd6580 at %#x\n", base);
- printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
- config, control, QD_ID3);
-
- outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
- d.port_ops = &qd6580_port_ops;
- if (control & QD_CONTR_SEC_DISABLED)
- d.host_flags |= IDE_HFLAG_SINGLE;
-
- printk(KERN_INFO "qd6580: %s IDE board\n",
- (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual");
- break;
- default:
- return -ENODEV;
- }
-
- rc = ide_legacy_device_add(&d, (base << 8) | config);
-
- if (d.host_flags & IDE_HFLAG_SINGLE)
- return (rc == 0) ? 1 : rc;
-
- return rc;
-}
-
-static bool probe_qd65xx;
-
-module_param_named(probe, probe_qd65xx, bool, 0);
-MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
-
-static int __init qd65xx_init(void)
-{
- int rc1, rc2 = -ENODEV;
-
- if (probe_qd65xx == 0)
- return -ENODEV;
-
- rc1 = qd_probe(0x30);
- if (rc1)
- rc2 = qd_probe(0xb0);
-
- if (rc1 < 0 && rc2 < 0)
- return -ENODEV;
-
- return 0;
-}
-
-module_init(qd65xx_init);
-
-MODULE_AUTHOR("Samuel Thibault");
-MODULE_DESCRIPTION("support of qd65xx vlb ide chipset");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h
deleted file mode 100644
index 01a43ab45e0e..000000000000
--- a/drivers/ide/qd65xx.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2000 Linus Torvalds & authors
- */
-
-/*
- * Authors: Petr Soucek <petr@...ton.cz>
- * Samuel Thibault <samuel.thibault@...-lyon.org>
- */
-
-/* truncates a in [b,c] */
-#define IDE_IN(a,b,c) ( ((a)<(b)) ? (b) : ( (a)>(c) ? (c) : (a)) )
-
-#define IDE_IMPLY(a,b) ((!(a)) || (b))
-
-#define QD_TIM1_PORT (base)
-#define QD_CONFIG_PORT (base+0x01)
-#define QD_TIM2_PORT (base+0x02)
-#define QD_CONTROL_PORT (base+0x03)
-
-#define QD_CONFIG_IDE_BASEPORT 0x01
-#define QD_CONFIG_BASEPORT 0x02
-#define QD_CONFIG_ID3 0x04
-#define QD_CONFIG_DISABLED 0x08
-#define QD_CONFIG_QD6500 0xc0
-#define QD_CONFIG_QD6580_A 0xa0
-#define QD_CONFIG_QD6580_B 0x50
-
-#define QD_CONTR_SEC_DISABLED 0x01
-
-#define QD_ID3 ((config & QD_CONFIG_ID3)!=0)
-
-#define QD_CONFIG(hwif) ((hwif)->config_data & 0x00ff)
-
-static inline u8 QD_TIMING(ide_drive_t *drive)
-{
- return (unsigned long)ide_get_drivedata(drive) & 0x00ff;
-}
-
-static inline u8 QD_TIMREG(ide_drive_t *drive)
-{
- return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8;
-}
-
-#define QD6500_DEF_DATA ((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0c : 0x08))
-#define QD6580_DEF_DATA ((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))
-#define QD6580_DEF_DATA2 ((QD_TIM2_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))
-#define QD_DEF_CONTR (0x40 | ((control & 0x02) ? 0x9f : 0x1f))
-
-#define QD_TESTVAL 0x19 /* safe value */
-
-/* Drive specific timing taken from DOS driver v3.7 */
-
-static struct qd65xx_timing_s {
- s8 offset; /* ofset from the beginning of Model Number" */
- char model[4]; /* 4 chars from Model number, no conversion */
- s16 active; /* active time */
- s16 recovery; /* recovery time */
-} qd65xx_timing [] = {
- { 30, "2040", 110, 225 }, /* Conner CP30204 */
- { 30, "2045", 135, 225 }, /* Conner CP30254 */
- { 30, "1040", 155, 325 }, /* Conner CP30104 */
- { 30, "1047", 135, 265 }, /* Conner CP30174 */
- { 30, "5344", 135, 225 }, /* Conner CP3544 */
- { 30, "01 4", 175, 405 }, /* Conner CP-3104 */
- { 27, "C030", 175, 375 }, /* Conner CP3000 */
- { 8, "PL42", 110, 295 }, /* Quantum LP240 */
- { 8, "PL21", 110, 315 }, /* Quantum LP120 */
- { 8, "PL25", 175, 385 }, /* Quantum LP52 */
- { 4, "PA24", 110, 285 }, /* WD Piranha SP4200 */
- { 6, "2200", 110, 260 }, /* WD Caviar AC2200 */
- { 6, "3204", 110, 235 }, /* WD Caviar AC2340 */
- { 6, "1202", 110, 265 }, /* WD Caviar AC2120 */
- { 0, "DS3-", 135, 315 }, /* Teac SD340 */
- { 8, "KM32", 175, 355 }, /* Toshiba MK234 */
- { 2, "53A1", 175, 355 }, /* Seagate ST351A */
- { 2, "4108", 175, 295 }, /* Seagate ST1480A */
- { 2, "1344", 175, 335 }, /* Seagate ST3144A */
- { 6, "7 12", 110, 225 }, /* Maxtor 7213A */
- { 30, "02F4", 145, 295 }, /* Conner 3204F */
- { 2, "1302", 175, 335 }, /* Seagate ST3120A */
- { 2, "2334", 145, 265 }, /* Seagate ST3243A */
- { 2, "2338", 145, 275 }, /* Seagate ST3283A */
- { 2, "3309", 145, 275 }, /* Seagate ST3390A */
- { 2, "5305", 145, 275 }, /* Seagate ST3550A */
- { 2, "4100", 175, 295 }, /* Seagate ST1400A */
- { 2, "4110", 175, 295 }, /* Seagate ST1401A */
- { 2, "6300", 135, 265 }, /* Seagate ST3600A */
- { 2, "5300", 135, 265 }, /* Seagate ST3500A */
- { 6, "7 31", 135, 225 }, /* Maxtor 7131 AT */
- { 6, "7 43", 115, 265 }, /* Maxtor 7345 AT */
- { 6, "7 42", 110, 255 }, /* Maxtor 7245 AT */
- { 6, "3 04", 135, 265 }, /* Maxtor 340 AT */
- { 6, "61 0", 135, 285 }, /* WD AC160 */
- { 6, "1107", 135, 235 }, /* WD AC1170 */
- { 6, "2101", 110, 220 }, /* WD AC1210 */
- { 6, "4202", 135, 245 }, /* WD AC2420 */
- { 6, "41 0", 175, 355 }, /* WD Caviar 140 */
- { 6, "82 0", 175, 355 }, /* WD Caviar 280 */
- { 8, "PL01", 175, 375 }, /* Quantum LP105 */
- { 8, "PL25", 110, 295 }, /* Quantum LP525 */
- { 10, "4S 2", 175, 385 }, /* Quantum ELS42 */
- { 10, "8S 5", 175, 385 }, /* Quantum ELS85 */
- { 10, "1S72", 175, 385 }, /* Quantum ELS127 */
- { 10, "1S07", 175, 385 }, /* Quantum ELS170 */
- { 8, "ZE42", 135, 295 }, /* Quantum EZ240 */
- { 8, "ZE21", 175, 385 }, /* Quantum EZ127 */
- { 8, "ZE58", 175, 385 }, /* Quantum EZ85 */
- { 8, "ZE24", 175, 385 }, /* Quantum EZ42 */
- { 27, "C036", 155, 325 }, /* Conner CP30064 */
- { 27, "C038", 155, 325 }, /* Conner CP30084 */
- { 6, "2205", 110, 255 }, /* WDC AC2250 */
- { 2, " CHA", 140, 415 }, /* WDC AH series; WDC AH260, WDC */
- { 2, " CLA", 140, 415 }, /* WDC AL series: WDC AL2120, 2170, */
- { 4, "UC41", 140, 415 }, /* WDC CU140 */
- { 6, "1207", 130, 275 }, /* WDC AC2170 */
- { 6, "2107", 130, 275 }, /* WDC AC1270 */
- { 6, "5204", 130, 275 }, /* WDC AC2540 */
- { 30, "3004", 110, 235 }, /* Conner CP30340 */
- { 30, "0345", 135, 255 }, /* Conner CP30544 */
- { 12, "12A3", 175, 320 }, /* MAXTOR LXT-213A */
- { 12, "43A0", 145, 240 }, /* MAXTOR LXT-340A */
- { 6, "7 21", 180, 290 }, /* Maxtor 7120 AT */
- { 6, "7 71", 135, 240 }, /* Maxtor 7170 AT */
- { 12, "45\0000", 110, 205 }, /* MAXTOR MXT-540 */
- { 8, "PL11", 180, 290 }, /* QUANTUM LP110A */
- { 8, "OG21", 150, 275 }, /* QUANTUM GO120 */
- { 12, "42A5", 175, 320 }, /* MAXTOR LXT-245A */
- { 2, "2309", 175, 295 }, /* ST3290A */
- { 2, "3358", 180, 310 }, /* ST3385A */
- { 2, "6355", 180, 310 }, /* ST3655A */
- { 2, "1900", 175, 270 }, /* ST9100A */
- { 2, "1954", 175, 270 }, /* ST9145A */
- { 2, "1909", 175, 270 }, /* ST9190AG */
- { 2, "2953", 175, 270 }, /* ST9235A */
- { 2, "1359", 175, 270 }, /* ST3195A */
- { 24, "3R11", 175, 290 }, /* ALPS ELECTRIC Co.,LTD, DR311C */
- { 0, "2M26", 175, 215 }, /* M262XT-0Ah */
- { 4, "2253", 175, 300 }, /* HP C2235A */
- { 4, "-32A", 145, 245 }, /* H3133-A2 */
- { 30, "0326", 150, 270 }, /* Samsung Electronics 120MB */
- { 30, "3044", 110, 195 }, /* Conner CFA340A */
- { 30, "43A0", 110, 195 }, /* Conner CFA340A */
- { -1, " ", 175, 415 } /* unknown disk name */
-};
diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c
deleted file mode 100644
index 0ab8b86b7ed7..000000000000
--- a/drivers/ide/rapide.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 1996-2002 Russell King.
- */
-
-#include <linux/module.h>
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/ecard.h>
-
-static const struct ide_port_info rapide_port_info = {
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
- .chipset = ide_generic,
-};
-
-static void rapide_setup_ports(struct ide_hw *hw, void __iomem *base,
- void __iomem *ctrl, unsigned int sz, int irq)
-{
- unsigned long port = (unsigned long)base;
- int i;
-
- for (i = 0; i <= 7; i++) {
- hw->io_ports_array[i] = port;
- port += sz;
- }
- hw->io_ports.ctl_addr = (unsigned long)ctrl;
- hw->irq = irq;
-}
-
-static int rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
-{
- void __iomem *base;
- struct ide_host *host;
- int ret;
- struct ide_hw hw, *hws[] = { &hw };
-
- ret = ecard_request_resources(ec);
- if (ret)
- goto out;
-
- base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
- if (!base) {
- ret = -ENOMEM;
- goto release;
- }
-
- memset(&hw, 0, sizeof(hw));
- rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq);
- hw.dev = &ec->dev;
-
- ret = ide_host_add(&rapide_port_info, hws, 1, &host);
- if (ret)
- goto release;
-
- ecard_set_drvdata(ec, host);
- goto out;
-
- release:
- ecard_release_resources(ec);
- out:
- return ret;
-}
-
-static void rapide_remove(struct expansion_card *ec)
-{
- struct ide_host *host = ecard_get_drvdata(ec);
-
- ecard_set_drvdata(ec, NULL);
-
- ide_host_remove(host);
-
- ecard_release_resources(ec);
-}
-
-static struct ecard_id rapide_ids[] = {
- { MANU_YELLOWSTONE, PROD_YELLOWSTONE_RAPIDE32 },
- { 0xffff, 0xffff }
-};
-
-static struct ecard_driver rapide_driver = {
- .probe = rapide_probe,
- .remove = rapide_remove,
- .id_table = rapide_ids,
- .drv = {
- .name = "rapide",
- },
-};
-
-static int __init rapide_init(void)
-{
- return ecard_register_driver(&rapide_driver);
-}
-
-static void __exit rapide_exit(void)
-{
- ecard_remove_driver(&rapide_driver);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Yellowstone RAPIDE driver");
-
-module_init(rapide_init);
-module_exit(rapide_exit);
diff --git a/drivers/ide/rz1000.c b/drivers/ide/rz1000.c
deleted file mode 100644
index fce2b7de5a19..000000000000
--- a/drivers/ide/rz1000.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1995-1998 Linus Torvalds & author (see below)
- */
-
-/*
- * Principal Author: mlord@...ox.com (Mark Lord)
- *
- * See linux/MAINTAINERS for address of current maintainer.
- *
- * This file provides support for disabling the buggy read-ahead
- * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
- *
- * Dunno if this fixes both ports, or only the primary port (?).
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "rz1000"
-
-static int rz1000_disable_readahead(struct pci_dev *dev)
-{
- u16 reg;
-
- if (!pci_read_config_word (dev, 0x40, ®) &&
- !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
- printk(KERN_INFO "%s: disabled chipset read-ahead "
- "(buggy RZ1000/RZ1001)\n", pci_name(dev));
- return 0;
- } else {
- printk(KERN_INFO "%s: serialized, disabled unmasking "
- "(buggy RZ1000/RZ1001)\n", pci_name(dev));
- return 1;
- }
-}
-
-static const struct ide_port_info rz1000_chipset = {
- .name = DRV_NAME,
- .host_flags = IDE_HFLAG_NO_DMA,
-};
-
-static int rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = rz1000_chipset;
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- if (rz1000_disable_readahead(dev)) {
- d.host_flags |= IDE_HFLAG_SERIALIZE;
- d.host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static void rz1000_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id rz1000_pci_tbl[] = {
- { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), 0 },
- { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
-
-static struct pci_driver rz1000_pci_driver = {
- .name = "RZ1000_IDE",
- .id_table = rz1000_pci_tbl,
- .probe = rz1000_init_one,
- .remove = rz1000_remove,
-};
-
-static int __init rz1000_ide_init(void)
-{
- return ide_pci_register_driver(&rz1000_pci_driver);
-}
-
-static void __exit rz1000_ide_exit(void)
-{
- pci_unregister_driver(&rz1000_pci_driver);
-}
-
-module_init(rz1000_ide_init);
-module_exit(rz1000_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
deleted file mode 100644
index a5b701818405..000000000000
--- a/drivers/ide/sc1200.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2000-2002 Mark Lord <mlord@...ox.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Development of this chipset driver was funded
- * by the nice folks at National Semiconductor.
- *
- * Documentation:
- * Available from National Semiconductor
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/pm.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "sc1200"
-
-#define SC1200_REV_A 0x00
-#define SC1200_REV_B1 0x01
-#define SC1200_REV_B3 0x02
-#define SC1200_REV_C1 0x03
-#define SC1200_REV_D1 0x04
-
-#define PCI_CLK_33 0x00
-#define PCI_CLK_48 0x01
-#define PCI_CLK_66 0x02
-#define PCI_CLK_33A 0x03
-
-static unsigned short sc1200_get_pci_clock (void)
-{
- unsigned char chip_id, silicon_revision;
- unsigned int pci_clock;
- /*
- * Check the silicon revision, as not all versions of the chip
- * have the register with the fast PCI bus timings.
- */
- chip_id = inb (0x903c);
- silicon_revision = inb (0x903d);
-
- // Read the fast pci clock frequency
- if (chip_id == 0x04 && silicon_revision < SC1200_REV_B1) {
- pci_clock = PCI_CLK_33;
- } else {
- // check clock generator configuration (cfcc)
- // the clock is in bits 8 and 9 of this word
-
- pci_clock = inw (0x901e);
- pci_clock >>= 8;
- pci_clock &= 0x03;
- if (pci_clock == PCI_CLK_33A)
- pci_clock = PCI_CLK_33;
- }
- return pci_clock;
-}
-
-/*
- * Here are the standard PIO mode 0-4 timings for each "format".
- * Format-0 uses fast data reg timings, with slower command reg timings.
- * Format-1 uses fast timings for all registers, but won't work with all drives.
- */
-static const unsigned int sc1200_pio_timings[4][5] =
- {{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
- {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
- {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
- {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}}; // format1, 66Mhz
-
-/*
- * After chip reset, the PIO timings are set to 0x00009172, which is not valid.
- */
-//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
-
-static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
-
- pci_read_config_dword(pdev, basereg + 4, &format);
- format = (format >> 31) & 1;
- if (format)
- format += sc1200_get_pci_clock();
- pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
- sc1200_pio_timings[format][pio]);
-}
-
-/*
- * The SC1200 specifies that two drives sharing a cable cannot mix
- * UDMA/MDMA. It has to be one or the other, for the pair, though
- * different timings can still be chosen for each drive. We could
- * set the appropriate timing bits on the fly, but that might be
- * a bit confusing. So, for now we statically handle this requirement
- * by looking at our mate drive to see what it is capable of, before
- * choosing a mode for our own drive.
- */
-static u8 sc1200_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid;
- u8 mask = hwif->ultra_mask;
-
- if (mate == NULL)
- goto out;
- mateid = mate->id;
-
- if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
- if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
- (mateid[ATA_ID_UDMA_MODES] & 7))
- goto out;
- if (mateid[ATA_ID_MWDMA_MODES] & 7)
- mask = 0;
- }
-out:
- return mask;
-}
-
-static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int reg, timings;
- unsigned short pci_clock;
- unsigned int basereg = hwif->channel ? 0x50 : 0x40;
- const u8 mode = drive->dma_mode;
-
- static const u32 udma_timing[3][3] = {
- { 0x00921250, 0x00911140, 0x00911030 },
- { 0x00932470, 0x00922260, 0x00922140 },
- { 0x009436a1, 0x00933481, 0x00923261 },
- };
-
- static const u32 mwdma_timing[3][3] = {
- { 0x00077771, 0x00012121, 0x00002020 },
- { 0x000bbbb2, 0x00024241, 0x00013131 },
- { 0x000ffff3, 0x00035352, 0x00015151 },
- };
-
- pci_clock = sc1200_get_pci_clock();
-
- /*
- * Note that each DMA mode has several timings associated with it.
- * The correct timing depends on the fast PCI clock freq.
- */
-
- if (mode >= XFER_UDMA_0)
- timings = udma_timing[pci_clock][mode - XFER_UDMA_0];
- else
- timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
-
- if ((drive->dn & 1) == 0) {
- pci_read_config_dword(dev, basereg + 4, ®);
- timings |= reg & 0x80000000; /* preserve PIO format bit */
- pci_write_config_dword(dev, basereg + 4, timings);
- } else
- pci_write_config_dword(dev, basereg + 12, timings);
-}
-
-/* Replacement for the standard ide_dma_end action in
- * dma_proc.
- *
- * returns 1 on error, 0 otherwise
- */
-static int sc1200_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long dma_base = hwif->dma_base;
- u8 dma_stat;
-
- dma_stat = inb(dma_base+2); /* get DMA status */
-
- if (!(dma_stat & 4))
- printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n",
- dma_stat, ((dma_stat&7)!=4), ((dma_stat&2)==2));
-
- outb(dma_stat|0x1b, dma_base+2); /* clear the INTR & ERROR bits */
- outb(inb(dma_base)&~1, dma_base); /* !! DO THIS HERE !! stop DMA */
-
- return (dma_stat & 7) != 4; /* verify good DMA status */
-}
-
-/*
- * sc1200_set_pio_mode() handles setting of PIO modes
- * for both the chipset and drive.
- *
- * All existing BIOSs for this chipset guarantee that all drives
- * will have valid default PIO timings set up before we get here.
- */
-
-static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- int mode = -1;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /*
- * bad abuse of ->set_pio_mode interface
- */
- switch (pio) {
- case 200: mode = XFER_UDMA_0; break;
- case 201: mode = XFER_UDMA_1; break;
- case 202: mode = XFER_UDMA_2; break;
- case 100: mode = XFER_MW_DMA_0; break;
- case 101: mode = XFER_MW_DMA_1; break;
- case 102: mode = XFER_MW_DMA_2; break;
- }
- if (mode != -1) {
- printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
- ide_dma_off_quietly(drive);
- if (ide_set_dma_mode(drive, mode) == 0 &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA))
- hwif->dma_ops->dma_host_set(drive, 1);
- return;
- }
-
- sc1200_tunepio(drive, pio);
-}
-
-#ifdef CONFIG_PM
-struct sc1200_saved_state {
- u32 regs[8];
-};
-
-static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
-{
- printk("SC1200: suspend(%u)\n", state.event);
-
- /*
- * we only save state when going from full power to less
- */
- if (state.event == PM_EVENT_ON) {
- struct ide_host *host = pci_get_drvdata(dev);
- struct sc1200_saved_state *ss = host->host_priv;
- unsigned int r;
-
- /*
- * save timing registers
- * (this may be unnecessary if BIOS also does it)
- */
- for (r = 0; r < 8; r++)
- pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
- }
-
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
- return 0;
-}
-
-static int sc1200_resume (struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct sc1200_saved_state *ss = host->host_priv;
- unsigned int r;
- int i;
-
- i = pci_enable_device(dev);
- if (i)
- return i;
-
- /*
- * restore timing registers
- * (this may be unnecessary if BIOS also does it)
- */
- for (r = 0; r < 8; r++)
- pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
-
- return 0;
-}
-#endif
-
-static const struct ide_port_ops sc1200_port_ops = {
- .set_pio_mode = sc1200_set_pio_mode,
- .set_dma_mode = sc1200_set_dma_mode,
- .udma_filter = sc1200_udma_filter,
-};
-
-static const struct ide_dma_ops sc1200_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = sc1200_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info sc1200_chipset = {
- .name = DRV_NAME,
- .port_ops = &sc1200_port_ops,
- .dma_ops = &sc1200_dma_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_ABUSE_DMA_MODES,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
-};
-
-static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct sc1200_saved_state *ss = NULL;
- int rc;
-
-#ifdef CONFIG_PM
- ss = kmalloc(sizeof(*ss), GFP_KERNEL);
- if (ss == NULL)
- return -ENOMEM;
-#endif
- rc = ide_pci_init_one(dev, &sc1200_chipset, ss);
- if (rc)
- kfree(ss);
-
- return rc;
-}
-
-static const struct pci_device_id sc1200_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), 0},
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
-
-static struct pci_driver sc1200_pci_driver = {
- .name = "SC1200_IDE",
- .id_table = sc1200_pci_tbl,
- .probe = sc1200_init_one,
- .remove = ide_pci_remove,
-#ifdef CONFIG_PM
- .suspend = sc1200_suspend,
- .resume = sc1200_resume,
-#endif
-};
-
-static int __init sc1200_ide_init(void)
-{
- return ide_pci_register_driver(&sc1200_pci_driver);
-}
-
-static void __exit sc1200_ide_exit(void)
-{
- pci_unregister_driver(&sc1200_pci_driver);
-}
-
-module_init(sc1200_ide_init);
-module_exit(sc1200_ide_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
deleted file mode 100644
index 458e72e034b0..000000000000
--- a/drivers/ide/serverworks.c
+++ /dev/null
@@ -1,456 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1998-2000 Michel Aubry
- * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
- * Copyright (C) 1998-2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
- * Portions copyright (c) 2001 Sun Microsystems
- *
- *
- * RCC/ServerWorks IDE driver for Linux
- *
- * OSB4: `Open South Bridge' IDE Interface (fn 1)
- * supports UDMA mode 2 (33 MB/s)
- *
- * CSB5: `Champion South Bridge' IDE Interface (fn 1)
- * all revisions support UDMA mode 4 (66 MB/s)
- * revision A2.0 and up support UDMA mode 5 (100 MB/s)
- *
- * *** The CSB5 does not provide ANY register ***
- * *** to detect 80-conductor cable presence. ***
- *
- * CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
- *
- * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
- * controller same as the CSB6. Single channel ATA100 only.
- *
- * Documentation:
- * Available under NDA only. Errata info very hard to get.
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "serverworks"
-
-#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
-#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
-
-/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
- * can overrun their FIFOs when used with the CSB5 */
-static const char *svwks_bad_ata100[] = {
- "ST320011A",
- "ST340016A",
- "ST360021A",
- "ST380021A",
- NULL
-};
-
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
-{
- char *m = (char *)&drive->id[ATA_ID_PROD];
-
- while (*list)
- if (!strcmp(*list++, m))
- return 1;
- return 0;
-}
-
-static u8 svwks_udma_filter(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
- return 0x1f;
- } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
- return 0x07;
- } else {
- u8 btr = 0, mode, mask;
-
- pci_read_config_byte(dev, 0x5A, &btr);
- mode = btr & 0x3;
-
- /* If someone decides to do UDMA133 on CSB5 the same
- issue will bite so be inclusive */
- if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100))
- mode = 2;
-
- switch(mode) {
- case 3: mask = 0x3f; break;
- case 2: mask = 0x1f; break;
- case 1: mask = 0x07; break;
- default: mask = 0x00; break;
- }
-
- return mask;
- }
-}
-
-static u8 svwks_csb_check (struct pci_dev *dev)
-{
- switch (dev->device) {
- case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
- case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
- return 1;
- default:
- break;
- }
- return 0;
-}
-
-static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
- static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
-
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- if (drive->dn >= ARRAY_SIZE(drive_pci))
- return;
-
- pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
-
- if (svwks_csb_check(dev)) {
- u16 csb_pio = 0;
-
- pci_read_config_word(dev, 0x4a, &csb_pio);
-
- csb_pio &= ~(0x0f << (4 * drive->dn));
- csb_pio |= (pio << (4 * drive->dn));
-
- pci_write_config_word(dev, 0x4a, csb_pio);
- }
-}
-
-static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
- static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
- static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
-
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- const u8 speed = drive->dma_mode;
- u8 unit = drive->dn & 1;
-
- u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
-
- if (drive->dn >= ARRAY_SIZE(drive_pci2))
- return;
-
- pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing);
- pci_read_config_byte(dev, 0x54, &ultra_enable);
-
- ultra_timing &= ~(0x0F << (4*unit));
- ultra_enable &= ~(0x01 << drive->dn);
-
- if (speed >= XFER_UDMA_0) {
- dma_timing |= dma_modes[2];
- ultra_timing |= (udma_modes[speed - XFER_UDMA_0] << (4 * unit));
- ultra_enable |= (0x01 << drive->dn);
- } else if (speed >= XFER_MW_DMA_0)
- dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
-
- pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing);
- pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);
- pci_write_config_byte(dev, 0x54, ultra_enable);
-}
-
-static int init_chipset_svwks(struct pci_dev *dev)
-{
- unsigned int reg;
- u8 btr;
-
- /* force Master Latency Timer value to 64 PCICLKs */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
-
- /* OSB4 : South Bridge and IDE */
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- struct pci_dev *isa_dev =
- pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
- if (isa_dev) {
- pci_read_config_dword(isa_dev, 0x64, ®);
- reg &= ~0x00002000; /* disable 600ns interrupt mask */
- if(!(reg & 0x00004000))
- printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS "
- "enabled.\n", pci_name(dev));
- reg |= 0x00004000; /* enable UDMA/33 support */
- pci_write_config_dword(isa_dev, 0x64, reg);
- pci_dev_put(isa_dev);
- }
- }
-
- /* setup CSB5/CSB6 : South Bridge and IDE option RAID */
- else if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
-
- /* Third Channel Test */
- if (!(PCI_FUNC(dev->devfn) & 1)) {
- struct pci_dev * findev = NULL;
- u32 reg4c = 0;
- findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
- if (findev) {
- pci_read_config_dword(findev, 0x4C, ®4c);
- reg4c &= ~0x000007FF;
- reg4c |= 0x00000040;
- reg4c |= 0x00000020;
- pci_write_config_dword(findev, 0x4C, reg4c);
- pci_dev_put(findev);
- }
- outb_p(0x06, 0x0c00);
- dev->irq = inb_p(0x0c01);
- } else {
- struct pci_dev * findev = NULL;
- u8 reg41 = 0;
-
- findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
- if (findev) {
- pci_read_config_byte(findev, 0x41, ®41);
- reg41 &= ~0x40;
- pci_write_config_byte(findev, 0x41, reg41);
- pci_dev_put(findev);
- }
- /*
- * This is a device pin issue on CSB6.
- * Since there will be a future raid mode,
- * early versions of the chipset require the
- * interrupt pin to be set, and it is a compatibility
- * mode issue.
- */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
- dev->irq = 0;
- }
-// pci_read_config_dword(dev, 0x40, &pioreg)
-// pci_write_config_dword(dev, 0x40, 0x99999999);
-// pci_read_config_dword(dev, 0x44, &dmareg);
-// pci_write_config_dword(dev, 0x44, 0xFFFFFFFF);
- /* setup the UDMA Control register
- *
- * 1. clear bit 6 to enable DMA
- * 2. enable DMA modes with bits 0-1
- * 00 : legacy
- * 01 : udma2
- * 10 : udma2/udma4
- * 11 : udma2/udma4/udma5
- */
- pci_read_config_byte(dev, 0x5A, &btr);
- btr &= ~0x40;
- if (!(PCI_FUNC(dev->devfn) & 1))
- btr |= 0x2;
- else
- btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
- pci_write_config_byte(dev, 0x5A, btr);
- }
- /* Setup HT1000 SouthBridge Controller - Single Channel Only */
- else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
- pci_read_config_byte(dev, 0x5A, &btr);
- btr &= ~0x40;
- btr |= 0x3;
- pci_write_config_byte(dev, 0x5A, btr);
- }
-
- return 0;
-}
-
-static u8 ata66_svwks_svwks(ide_hwif_t *hwif)
-{
- return ATA_CBL_PATA80;
-}
-
-/* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits
- * of the subsystem device ID indicate presence of an 80-pin cable.
- * Bit 15 clear = secondary IDE channel does not have 80-pin cable.
- * Bit 15 set = secondary IDE channel has 80-pin cable.
- * Bit 14 clear = primary IDE channel does not have 80-pin cable.
- * Bit 14 set = primary IDE channel has 80-pin cable.
- */
-static u8 ata66_svwks_dell(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
- dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE))
- return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- return ATA_CBL_PATA40;
-}
-
-/* Sun Cobalt Alpine hardware avoids the 80-pin cable
- * detect issue by attaching the drives directly to the board.
- * This check follows the Dell precedent (how scary is that?!)
- *
- * WARNING: this only works on Alpine hardware!
- */
-static u8 ata66_svwks_cobalt(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
- dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
- return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- return ATA_CBL_PATA40;
-}
-
-static u8 svwks_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- /* Server Works */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS)
- return ata66_svwks_svwks (hwif);
-
- /* Dell PowerEdge */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL)
- return ata66_svwks_dell (hwif);
-
- /* Cobalt Alpine */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN)
- return ata66_svwks_cobalt (hwif);
-
- /* Per Specified Design by OEM, and ASIC Architect */
- if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2))
- return ATA_CBL_PATA80;
-
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops osb4_port_ops = {
- .set_pio_mode = svwks_set_pio_mode,
- .set_dma_mode = svwks_set_dma_mode,
-};
-
-static const struct ide_port_ops svwks_port_ops = {
- .set_pio_mode = svwks_set_pio_mode,
- .set_dma_mode = svwks_set_dma_mode,
- .udma_filter = svwks_udma_filter,
- .cable_detect = svwks_cable_detect,
-};
-
-static const struct ide_port_info serverworks_chipsets[] = {
- { /* 0: OSB4 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &osb4_port_ops,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = 0x00, /* UDMA is problematic on OSB4 */
- },
- { /* 1: CSB5 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 2: CSB6 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 3: CSB6-2 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 4: HT1000 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- }
-};
-
-/**
- * svwks_init_one - called when a OSB/CSB is found
- * @dev: the svwks device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d;
- u8 idx = id->driver_data;
-
- d = serverworks_chipsets[idx];
-
- if (idx == 1)
- d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
- else if (idx == 2 || idx == 3) {
- if ((PCI_FUNC(dev->devfn) & 1) == 0) {
- if (pci_resource_start(dev, 0) != 0x01f1)
- d.host_flags |= IDE_HFLAG_NON_BOOTABLE;
- d.host_flags |= IDE_HFLAG_SINGLE;
- } else
- d.host_flags &= ~IDE_HFLAG_SINGLE;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id svwks_pci_tbl[] = {
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
-
-static struct pci_driver svwks_pci_driver = {
- .name = "Serverworks_IDE",
- .id_table = svwks_pci_tbl,
- .probe = svwks_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init svwks_ide_init(void)
-{
- return ide_pci_register_driver(&svwks_pci_driver);
-}
-
-static void __exit svwks_ide_exit(void)
-{
- pci_unregister_driver(&svwks_pci_driver);
-}
-
-module_init(svwks_ide_init);
-module_exit(svwks_ide_exit);
-
-MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
deleted file mode 100644
index fdc8e813170c..000000000000
--- a/drivers/ide/setup-pci.c
+++ /dev/null
@@ -1,682 +0,0 @@
-/*
- * Copyright (C) 1998-2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 1995-1998 Mark Lord
- * Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ide.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
-
-/**
- * ide_setup_pci_baseregs - place a PCI IDE controller native
- * @dev: PCI device of interface to switch native
- * @name: Name of interface
- *
- * We attempt to place the PCI interface into PCI native mode. If
- * we succeed the BARs are ok and the controller is in PCI mode.
- * Returns 0 on success or an errno code.
- *
- * FIXME: if we program the interface and then fail to set the BARS
- * we don't switch it back to legacy mode. Do we actually care ??
- */
-
-static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
-{
- u8 progif = 0;
-
- /*
- * Place both IDE interfaces into PCI "native" mode:
- */
- if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
- (progif & 5) != 5) {
- if ((progif & 0xa) != 0xa) {
- printk(KERN_INFO "%s %s: device not capable of full "
- "native PCI mode\n", name, pci_name(dev));
- return -EOPNOTSUPP;
- }
- printk(KERN_INFO "%s %s: placing both ports into native PCI "
- "mode\n", name, pci_name(dev));
- (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
- if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
- (progif & 5) != 5) {
- printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
- "wanted 0x%04x, got 0x%04x\n",
- name, pci_name(dev), progif | 5, progif);
- return -EOPNOTSUPP;
- }
- }
- return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
-{
- u8 dma_stat = inb(dma_base + 2);
-
- outb(dma_stat & 0x60, dma_base + 2);
- dma_stat = inb(dma_base + 2);
-
- return (dma_stat & 0x80) ? 1 : 0;
-}
-
-/**
- * ide_pci_dma_base - setup BMIBA
- * @hwif: IDE interface
- * @d: IDE port info
- *
- * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
- */
-
-unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long dma_base = 0;
-
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- return hwif->dma_base;
-
- if (hwif->mate && hwif->mate->dma_base) {
- dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
- } else {
- u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;
-
- dma_base = pci_resource_start(dev, baridx);
-
- if (dma_base == 0) {
- printk(KERN_ERR "%s %s: DMA base is invalid\n",
- d->name, pci_name(dev));
- return 0;
- }
- }
-
- if (hwif->channel)
- dma_base += 8;
-
- return dma_base;
-}
-EXPORT_SYMBOL_GPL(ide_pci_dma_base);
-
-int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 dma_stat;
-
- if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
- goto out;
-
- if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
- if (ide_pci_clear_simplex(hwif->dma_base, d->name))
- printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
- d->name, pci_name(dev));
- goto out;
- }
-
- /*
- * If the device claims "simplex" DMA, this means that only one of
- * the two interfaces can be trusted with DMA at any point in time
- * (so we should enable DMA only on one of the two interfaces).
- *
- * FIXME: At this point we haven't probed the drives so we can't make
- * the appropriate decision. Really we should defer this problem until
- * we tune the drive then try to grab DMA ownership if we want to be
- * the DMA end. This has to be become dynamic to handle hot-plug.
- */
- dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
- if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
- printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
- d->name, pci_name(dev));
- return -1;
- }
-out:
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_pci_check_simplex);
-
-/*
- * Set up BM-DMA capability (PnP BIOS should have done this)
- */
-int ide_pci_set_master(struct pci_dev *dev, const char *name)
-{
- u16 pcicmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
-
- if ((pcicmd & PCI_COMMAND_MASTER) == 0) {
- pci_set_master(dev);
-
- if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
- (pcicmd & PCI_COMMAND_MASTER) == 0) {
- printk(KERN_ERR "%s %s: error updating PCICMD\n",
- name, pci_name(dev));
- return -EIO;
- }
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_pci_set_master);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
-
-void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
-{
- printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
- d->name, pci_name(dev),
- dev->vendor, dev->device, dev->revision);
-}
-EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
-
-
-/**
- * ide_pci_enable - do PCI enables
- * @dev: PCI device
- * @bars: PCI BARs mask
- * @d: IDE port info
- *
- * Enable the IDE PCI device. We attempt to enable the device in full
- * but if that fails then we only need IO space. The PCI code should
- * have setup the proper resources for us already for controllers in
- * legacy mode.
- *
- * Returns zero on success or an error code
- */
-
-static int ide_pci_enable(struct pci_dev *dev, int bars,
- const struct ide_port_info *d)
-{
- int ret;
-
- if (pci_enable_device(dev)) {
- ret = pci_enable_device_io(dev);
- if (ret < 0) {
- printk(KERN_WARNING "%s %s: couldn't enable device\n",
- d->name, pci_name(dev));
- goto out;
- }
- printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
- d->name, pci_name(dev));
- }
-
- /*
- * assume all devices can do 32-bit DMA for now, we can add
- * a DMA mask field to the struct ide_port_info if we need it
- * (or let lower level driver set the DMA mask)
- */
- ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
- if (ret < 0) {
- printk(KERN_ERR "%s %s: can't set DMA mask\n",
- d->name, pci_name(dev));
- goto out;
- }
-
- ret = pci_request_selected_regions(dev, bars, d->name);
- if (ret < 0)
- printk(KERN_ERR "%s %s: can't reserve resources\n",
- d->name, pci_name(dev));
-out:
- return ret;
-}
-
-/**
- * ide_pci_configure - configure an unconfigured device
- * @dev: PCI device
- * @d: IDE port info
- *
- * Enable and configure the PCI device we have been passed.
- * Returns zero on success or an error code.
- */
-
-static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
-{
- u16 pcicmd = 0;
- /*
- * PnP BIOS was *supposed* to have setup this device, but we
- * can do it ourselves, so long as the BIOS has assigned an IRQ
- * (or possibly the device is using a "legacy header" for IRQs).
- * Maybe the user deliberately *disabled* the device,
- * but we'll eventually ignore it again if no drives respond.
- */
- if (ide_setup_pci_baseregs(dev, d->name) ||
- pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
- printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
- d->name, pci_name(dev));
- return -ENODEV;
- }
- if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
- printk(KERN_ERR "%s %s: error accessing PCI regs\n",
- d->name, pci_name(dev));
- return -EIO;
- }
- if (!(pcicmd & PCI_COMMAND_IO)) {
- printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
- d->name, pci_name(dev));
- return -ENXIO;
- }
- return 0;
-}
-
-/**
- * ide_pci_check_iomem - check a register is I/O
- * @dev: PCI device
- * @d: IDE port info
- * @bar: BAR number
- *
- * Checks if a BAR is configured and points to MMIO space. If so,
- * return an error code. Otherwise return 0
- */
-
-static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d,
- int bar)
-{
- ulong flags = pci_resource_flags(dev, bar);
-
- /* Unconfigured ? */
- if (!flags || pci_resource_len(dev, bar) == 0)
- return 0;
-
- /* I/O space */
- if (flags & IORESOURCE_IO)
- return 0;
-
- /* Bad */
- return -EINVAL;
-}
-
-/**
- * ide_hw_configure - configure a struct ide_hw instance
- * @dev: PCI device holding interface
- * @d: IDE port info
- * @port: port number
- * @hw: struct ide_hw instance corresponding to this port
- *
- * Perform the initial set up for the hardware interface structure. This
- * is done per interface port rather than per PCI device. There may be
- * more than one port per device.
- *
- * Returns zero on success or an error code.
- */
-
-static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
- unsigned int port, struct ide_hw *hw)
-{
- unsigned long ctl = 0, base = 0;
-
- if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
- if (ide_pci_check_iomem(dev, d, 2 * port) ||
- ide_pci_check_iomem(dev, d, 2 * port + 1)) {
- printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
- "reported as MEM for port %d!\n",
- d->name, pci_name(dev), port);
- return -EINVAL;
- }
-
- ctl = pci_resource_start(dev, 2*port+1);
- base = pci_resource_start(dev, 2*port);
- } else {
- /* Use default values */
- ctl = port ? 0x374 : 0x3f4;
- base = port ? 0x170 : 0x1f0;
- }
-
- if (!base || !ctl) {
- printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
- d->name, pci_name(dev), port);
- return -EINVAL;
- }
-
- memset(hw, 0, sizeof(*hw));
- hw->dev = &dev->dev;
- ide_std_init_ports(hw, base, ctl | 2);
-
- return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-/**
- * ide_hwif_setup_dma - configure DMA interface
- * @hwif: IDE interface
- * @d: IDE port info
- *
- * Set up the DMA base for the interface. Enable the master bits as
- * necessary and attempt to bring the device DMA into a ready to use
- * state
- */
-
-int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
- ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
- (dev->class & 0x80))) {
- unsigned long base = ide_pci_dma_base(hwif, d);
-
- if (base == 0)
- return -1;
-
- hwif->dma_base = base;
-
- if (hwif->dma_ops == NULL)
- hwif->dma_ops = &sff_dma_ops;
-
- if (ide_pci_check_simplex(hwif, d) < 0)
- return -1;
-
- if (ide_pci_set_master(dev, d->name) < 0)
- return -1;
-
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
- else
- printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
- hwif->name, base, base + 7);
-
- hwif->extra_base = base + (hwif->channel ? 8 : 16);
-
- if (ide_allocate_dma_engine(hwif))
- return -1;
- }
-
- return 0;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
-
-/**
- * ide_setup_pci_controller - set up IDE PCI
- * @dev: PCI device
- * @bars: PCI BARs mask
- * @d: IDE port info
- * @noisy: verbose flag
- *
- * Set up the PCI and controller side of the IDE interface. This brings
- * up the PCI side of the device, checks that the device is enabled
- * and enables it if need be
- */
-
-static int ide_setup_pci_controller(struct pci_dev *dev, int bars,
- const struct ide_port_info *d, int noisy)
-{
- int ret;
- u16 pcicmd;
-
- if (noisy)
- ide_setup_pci_noise(dev, d);
-
- ret = ide_pci_enable(dev, bars, d);
- if (ret < 0)
- goto out;
-
- ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
- if (ret < 0) {
- printk(KERN_ERR "%s %s: error accessing PCI regs\n",
- d->name, pci_name(dev));
- goto out_free_bars;
- }
- if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */
- ret = ide_pci_configure(dev, d);
- if (ret < 0)
- goto out_free_bars;
- printk(KERN_INFO "%s %s: device enabled (Linux)\n",
- d->name, pci_name(dev));
- }
-
- goto out;
-
-out_free_bars:
- pci_release_selected_regions(dev, bars);
-out:
- return ret;
-}
-
-/**
- * ide_pci_setup_ports - configure ports/devices on PCI IDE
- * @dev: PCI device
- * @d: IDE port info
- * @hw: struct ide_hw instances corresponding to this PCI IDE device
- * @hws: struct ide_hw pointers table to update
- *
- * Scan the interfaces attached to this device and do any
- * necessary per port setup. Attach the devices and ask the
- * generic DMA layer to do its work for us.
- *
- * Normally called automaticall from do_ide_pci_setup_device,
- * but is also used directly as a helper function by some controllers
- * where the chipset setup is not the default PCI IDE one.
- */
-
-void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
- struct ide_hw *hw, struct ide_hw **hws)
-{
- int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
- u8 tmp;
-
- /*
- * Set up the IDE ports
- */
-
- for (port = 0; port < channels; ++port) {
- const struct ide_pci_enablebit *e = &d->enablebits[port];
-
- if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
- (tmp & e->mask) != e->val)) {
- printk(KERN_INFO "%s %s: IDE port disabled\n",
- d->name, pci_name(dev));
- continue; /* port not enabled */
- }
-
- if (ide_hw_configure(dev, d, port, hw + port))
- continue;
-
- *(hws + port) = hw + port;
- }
-}
-EXPORT_SYMBOL_GPL(ide_pci_setup_ports);
-
-/*
- * ide_setup_pci_device() looks at the primary/secondary interfaces
- * on a PCI IDE device and, if they are enabled, prepares the IDE driver
- * for use with them. This generic code works for most PCI chipsets.
- *
- * One thing that is not standardized is the location of the
- * primary/secondary interface "enable/disable" bits. For chipsets that
- * we "know" about, this information is in the struct ide_port_info;
- * for all other chipsets, we just assume both interfaces are enabled.
- */
-static int do_ide_setup_pci_device(struct pci_dev *dev,
- const struct ide_port_info *d,
- u8 noisy)
-{
- int pciirq, ret;
-
- /*
- * Can we trust the reported IRQ?
- */
- pciirq = dev->irq;
-
- /*
- * This allows offboard ide-pci cards the enable a BIOS,
- * verify interrupt settings of split-mirror pci-config
- * space, place chipset into init-mode, and/or preserve
- * an interrupt if the card is not native ide support.
- */
- ret = d->init_chipset ? d->init_chipset(dev) : 0;
- if (ret < 0)
- goto out;
-
- if (ide_pci_is_in_compatibility_mode(dev)) {
- if (noisy)
- printk(KERN_INFO "%s %s: not 100%% native mode: will "
- "probe irqs later\n", d->name, pci_name(dev));
- pciirq = 0;
- } else if (!pciirq && noisy) {
- printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
- d->name, pci_name(dev), pciirq);
- } else if (noisy) {
- printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
- d->name, pci_name(dev), pciirq);
- }
-
- ret = pciirq;
-out:
- return ret;
-}
-
-int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
- const struct ide_port_info *d, void *priv)
-{
- struct pci_dev *pdev[] = { dev1, dev2 };
- struct ide_host *host;
- int ret, i, n_ports = dev2 ? 4 : 2, bars;
- struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
-
- if (d->host_flags & IDE_HFLAG_SINGLE)
- bars = (1 << 2) - 1;
- else
- bars = (1 << 4) - 1;
-
- if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
- if (d->host_flags & IDE_HFLAG_CS5520)
- bars |= (1 << 2);
- else
- bars |= (1 << 4);
- }
-
- for (i = 0; i < n_ports / 2; i++) {
- ret = ide_setup_pci_controller(pdev[i], bars, d, !i);
- if (ret < 0) {
- if (i == 1)
- pci_release_selected_regions(pdev[0], bars);
- goto out;
- }
-
- ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
- }
-
- host = ide_host_alloc(d, hws, n_ports);
- if (host == NULL) {
- ret = -ENOMEM;
- goto out_free_bars;
- }
-
- host->dev[0] = &dev1->dev;
- if (dev2)
- host->dev[1] = &dev2->dev;
-
- host->host_priv = priv;
- host->irq_flags = IRQF_SHARED;
-
- pci_set_drvdata(pdev[0], host);
- if (dev2)
- pci_set_drvdata(pdev[1], host);
-
- for (i = 0; i < n_ports / 2; i++) {
- ret = do_ide_setup_pci_device(pdev[i], d, !i);
-
- /*
- * FIXME: Mom, mom, they stole me the helper function to undo
- * do_ide_setup_pci_device() on the first device!
- */
- if (ret < 0)
- goto out_free_bars;
-
- /* fixup IRQ */
- if (ide_pci_is_in_compatibility_mode(pdev[i])) {
- hw[i*2].irq = pci_get_legacy_ide_irq(pdev[i], 0);
- hw[i*2 + 1].irq = pci_get_legacy_ide_irq(pdev[i], 1);
- } else
- hw[i*2 + 1].irq = hw[i*2].irq = ret;
- }
-
- ret = ide_host_register(host, d, hws);
- if (ret)
- ide_host_free(host);
- else
- goto out;
-
-out_free_bars:
- i = n_ports / 2;
- while (i--)
- pci_release_selected_regions(pdev[i], bars);
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(ide_pci_init_two);
-
-int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
- void *priv)
-{
- return ide_pci_init_two(dev, NULL, d, priv);
-}
-EXPORT_SYMBOL_GPL(ide_pci_init_one);
-
-void ide_pci_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
- int bars;
-
- if (host->host_flags & IDE_HFLAG_SINGLE)
- bars = (1 << 2) - 1;
- else
- bars = (1 << 4) - 1;
-
- if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) {
- if (host->host_flags & IDE_HFLAG_CS5520)
- bars |= (1 << 2);
- else
- bars |= (1 << 4);
- }
-
- ide_host_remove(host);
-
- if (dev2)
- pci_release_selected_regions(dev2, bars);
- pci_release_selected_regions(dev, bars);
-
- if (dev2)
- pci_disable_device(dev2);
- pci_disable_device(dev);
-}
-EXPORT_SYMBOL_GPL(ide_pci_remove);
-
-#ifdef CONFIG_PM
-int ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
-{
- pci_save_state(dev);
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_pci_suspend);
-
-int ide_pci_resume(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- int rc;
-
- pci_set_power_state(dev, PCI_D0);
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- pci_restore_state(dev);
- pci_set_master(dev);
-
- if (host->init_chipset)
- host->init_chipset(dev);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_pci_resume);
-#endif
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
deleted file mode 100644
index c4b20f350b84..000000000000
--- a/drivers/ide/siimage.c
+++ /dev/null
@@ -1,843 +0,0 @@
-/*
- * Copyright (C) 2001-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2003 Red Hat
- * Copyright (C) 2007-2008 MontaVista Software, Inc.
- * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Documentation for CMD680:
- * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
- *
- * Documentation for SiI 3112:
- * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
- *
- * Errata and other documentation only available under NDA.
- *
- *
- * FAQ Items:
- * If you are using Marvell SATA-IDE adapters with Maxtor drives
- * ensure the system is set up for ATA100/UDMA5, not UDMA6.
- *
- * If you are using WD drives with SATA bridges you must set the
- * drive to "Single". "Master" will hang.
- *
- * If you have strange problems with nVidia chipset systems please
- * see the SI support documentation and update your system BIOS
- * if necessary
- *
- * The Dell DRAC4 has some interesting features including effectively hot
- * unplugging/replugging the virtual CD interface when the DRAC is reset.
- * This often causes drivers/ide/siimage to panic but is ok with the rather
- * smarter code in libata.
- *
- * TODO:
- * - VDMA support
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define DRV_NAME "siimage"
-
-/**
- * pdev_is_sata - check if device is SATA
- * @pdev: PCI device to check
- *
- * Returns true if this is a SATA controller
- */
-
-static int pdev_is_sata(struct pci_dev *pdev)
-{
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- switch (pdev->device) {
- case PCI_DEVICE_ID_SII_3112:
- case PCI_DEVICE_ID_SII_1210SA:
- return 1;
- case PCI_DEVICE_ID_SII_680:
- return 0;
- }
- BUG();
-#endif
- return 0;
-}
-
-/**
- * is_sata - check if hwif is SATA
- * @hwif: interface to check
- *
- * Returns true if this is a SATA controller
- */
-
-static inline int is_sata(ide_hwif_t *hwif)
-{
- return pdev_is_sata(to_pci_dev(hwif->dev));
-}
-
-/**
- * siimage_selreg - return register base
- * @hwif: interface
- * @r: config offset
- *
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
- * Thankfully this is a configuration operation, so isn't performance
- * critical.
- */
-
-static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
-{
- unsigned long base = (unsigned long)hwif->hwif_data;
-
- base += 0xA0 + r;
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- base += hwif->channel << 6;
- else
- base += hwif->channel << 4;
- return base;
-}
-
-/**
- * siimage_seldev - return register base
- * @hwif: interface
- * @r: config offset
- *
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
- * including accounting for the unit shift.
- */
-
-static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long base = (unsigned long)hwif->hwif_data;
- u8 unit = drive->dn & 1;
-
- base += 0xA0 + r;
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- base += hwif->channel << 6;
- else
- base += hwif->channel << 4;
- base |= unit << unit;
- return base;
-}
-
-static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- u8 tmp = 0;
-
- if (host->host_priv)
- tmp = readb((void __iomem *)addr);
- else
- pci_read_config_byte(dev, addr, &tmp);
-
- return tmp;
-}
-
-static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- u16 tmp = 0;
-
- if (host->host_priv)
- tmp = readw((void __iomem *)addr);
- else
- pci_read_config_word(dev, addr, &tmp);
-
- return tmp;
-}
-
-static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- if (host->host_priv)
- writeb(val, (void __iomem *)addr);
- else
- pci_write_config_byte(dev, addr, val);
-}
-
-static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- if (host->host_priv)
- writew(val, (void __iomem *)addr);
- else
- pci_write_config_word(dev, addr, val);
-}
-
-static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- if (host->host_priv)
- writel(val, (void __iomem *)addr);
- else
- pci_write_config_dword(dev, addr, val);
-}
-
-/**
- * sil_udma_filter - compute UDMA mask
- * @drive: IDE device
- *
- * Compute the available UDMA speeds for the device on the interface.
- *
- * For the CMD680 this depends on the clocking mode (scsc), for the
- * SI3112 SATA controller life is a bit simpler.
- */
-
-static u8 sil_pata_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = (unsigned long)hwif->hwif_data;
- u8 scsc, mask = 0;
-
- base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
-
- scsc = sil_ioread8(dev, base);
-
- switch (scsc & 0x30) {
- case 0x10: /* 133 */
- mask = ATA_UDMA6;
- break;
- case 0x20: /* 2xPCI */
- mask = ATA_UDMA6;
- break;
- case 0x00: /* 100 */
- mask = ATA_UDMA5;
- break;
- default: /* Disabled ? */
- BUG();
- }
-
- return mask;
-}
-
-static u8 sil_sata_udma_filter(ide_drive_t *drive)
-{
- char *m = (char *)&drive->id[ATA_ID_PROD];
-
- return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
-}
-
-/**
- * sil_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Load the timing settings for this device mode into the
- * controller.
- */
-
-static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
- static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
-
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- u32 speedt = 0;
- u16 speedp = 0;
- unsigned long addr = siimage_seldev(drive, 0x04);
- unsigned long tfaddr = siimage_selreg(hwif, 0x02);
- unsigned long base = (unsigned long)hwif->hwif_data;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- u8 tf_pio = pio;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
- : (mmio ? 0xB4 : 0x80);
- u8 mode = 0;
- u8 unit = drive->dn & 1;
-
- /* trim *taskfile* PIO to the slowest of the master/slave */
- if (pair) {
- u8 pair_pio = pair->pio_mode - XFER_PIO_0;
-
- if (pair_pio < tf_pio)
- tf_pio = pair_pio;
- }
-
- /* cheat for now and use the docs */
- speedp = data_speed[pio];
- speedt = tf_speed[tf_pio];
-
- sil_iowrite16(dev, speedp, addr);
- sil_iowrite16(dev, speedt, tfaddr);
-
- /* now set up IORDY */
- speedp = sil_ioread16(dev, tfaddr - 2);
- speedp &= ~0x200;
-
- mode = sil_ioread8(dev, base + addr_mask);
- mode &= ~(unit ? 0x30 : 0x03);
-
- if (ide_pio_need_iordy(drive, pio)) {
- speedp |= 0x200;
- mode |= unit ? 0x10 : 0x01;
- }
-
- sil_iowrite16(dev, speedp, tfaddr - 2);
- sil_iowrite8(dev, mode, base + addr_mask);
-}
-
-/**
- * sil_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Tune the SiI chipset for the desired DMA mode.
- */
-
-static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
- static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
- static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
-
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = (unsigned long)hwif->hwif_data;
- u16 ultra = 0, multi = 0;
- u8 mode = 0, unit = drive->dn & 1;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
- : (mmio ? 0xB4 : 0x80);
- unsigned long ma = siimage_seldev(drive, 0x08);
- unsigned long ua = siimage_seldev(drive, 0x0C);
- const u8 speed = drive->dma_mode;
-
- scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
- mode = sil_ioread8 (dev, base + addr_mask);
- multi = sil_ioread16(dev, ma);
- ultra = sil_ioread16(dev, ua);
-
- mode &= ~(unit ? 0x30 : 0x03);
- ultra &= ~0x3F;
- scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
-
- scsc = is_sata(hwif) ? 1 : scsc;
-
- if (speed >= XFER_UDMA_0) {
- multi = dma[2];
- ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
- ultra5[speed - XFER_UDMA_0];
- mode |= unit ? 0x30 : 0x03;
- } else {
- multi = dma[speed - XFER_MW_DMA_0];
- mode |= unit ? 0x20 : 0x02;
- }
-
- sil_iowrite8 (dev, mode, base + addr_mask);
- sil_iowrite16(dev, multi, ma);
- sil_iowrite16(dev, ultra, ua);
-}
-
-static int sil_test_irq(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long addr = siimage_selreg(hwif, 1);
- u8 val = sil_ioread8(dev, addr);
-
- /* Return 1 if INTRQ asserted */
- return (val & 8) ? 1 : 0;
-}
-
-/**
- * siimage_mmio_dma_test_irq - check we caused an IRQ
- * @drive: drive we are testing
- *
- * Check if we caused an IDE DMA interrupt. We may also have caused
- * SATA status interrupts, if so we clean them up and continue.
- */
-
-static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- void __iomem *sata_error_addr
- = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
-
- if (sata_error_addr) {
- unsigned long base = (unsigned long)hwif->hwif_data;
- u32 ext_stat = readl((void __iomem *)(base + 0x10));
- u8 watchdog = 0;
-
- if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
- u32 sata_error = readl(sata_error_addr);
-
- writel(sata_error, sata_error_addr);
- watchdog = (sata_error & 0x00680000) ? 1 : 0;
- printk(KERN_WARNING "%s: sata_error = 0x%08x, "
- "watchdog = %d, %s\n",
- drive->name, sata_error, watchdog, __func__);
- } else
- watchdog = (ext_stat & 0x8000) ? 1 : 0;
-
- ext_stat >>= 16;
- if (!(ext_stat & 0x0404) && !watchdog)
- return 0;
- }
-
- /* return 1 if INTR asserted */
- if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
- return 1;
-
- return 0;
-}
-
-static int siimage_dma_test_irq(ide_drive_t *drive)
-{
- if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
- return siimage_mmio_dma_test_irq(drive);
- else
- return ide_dma_test_irq(drive);
-}
-
-/**
- * sil_sata_reset_poll - wait for SATA reset
- * @drive: drive we are resetting
- *
- * Poll the SATA phy and see whether it has come back from the dead
- * yet.
- */
-
-static blk_status_t sil_sata_reset_poll(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- void __iomem *sata_status_addr
- = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
-
- if (sata_status_addr) {
- /* SATA Status is available only when in MMIO mode */
- u32 sata_stat = readl(sata_status_addr);
-
- if ((sata_stat & 0x03) != 0x03) {
- printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, sata_stat);
- return BLK_STS_IOERR;
- }
- }
-
- return BLK_STS_OK;
-}
-
-/**
- * sil_sata_pre_reset - reset hook
- * @drive: IDE device being reset
- *
- * For the SATA devices we need to handle recalibration/geometry
- * differently
- */
-
-static void sil_sata_pre_reset(ide_drive_t *drive)
-{
- if (drive->media == ide_disk) {
- drive->special_flags &=
- ~(IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE);
- }
-}
-
-/**
- * init_chipset_siimage - set up an SI device
- * @dev: PCI device
- *
- * Perform the initial PCI set up for this device. Attempt to switch
- * to 133 MHz clocking if the system isn't already set up to do it.
- */
-
-static int init_chipset_siimage(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- void __iomem *ioaddr = host->host_priv;
- unsigned long base, scsc_addr;
- u8 rev = dev->revision, tmp;
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
-
- if (ioaddr)
- pci_set_master(dev);
-
- base = (unsigned long)ioaddr;
-
- if (ioaddr && pdev_is_sata(dev)) {
- u32 tmp32, irq_mask;
-
- /* make sure IDE0/1 interrupts are not masked */
- irq_mask = (1 << 22) | (1 << 23);
- tmp32 = readl(ioaddr + 0x48);
- if (tmp32 & irq_mask) {
- tmp32 &= ~irq_mask;
- writel(tmp32, ioaddr + 0x48);
- readl(ioaddr + 0x48); /* flush */
- }
- writel(0, ioaddr + 0x148);
- writel(0, ioaddr + 0x1C8);
- }
-
- sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
- sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
-
- scsc_addr = base ? (base + 0x4A) : 0x8A;
- tmp = sil_ioread8(dev, scsc_addr);
-
- switch (tmp & 0x30) {
- case 0x00:
- /* On 100 MHz clocking, try and switch to 133 MHz */
- sil_iowrite8(dev, tmp | 0x10, scsc_addr);
- break;
- case 0x30:
- /* Clocking is disabled, attempt to force 133MHz clocking. */
- sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
- case 0x10:
- /* On 133Mhz clocking. */
- break;
- case 0x20:
- /* On PCIx2 clocking. */
- break;
- }
-
- tmp = sil_ioread8(dev, scsc_addr);
-
- sil_iowrite8 (dev, 0x72, base + 0xA1);
- sil_iowrite16(dev, 0x328A, base + 0xA2);
- sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
- sil_iowrite32(dev, 0x43924392, base + 0xA8);
- sil_iowrite32(dev, 0x40094009, base + 0xAC);
- sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1);
- sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2);
- sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
- sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
- sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
-
- if (base && pdev_is_sata(dev)) {
- writel(0xFFFF0000, ioaddr + 0x108);
- writel(0xFFFF0000, ioaddr + 0x188);
- writel(0x00680000, ioaddr + 0x148);
- writel(0x00680000, ioaddr + 0x1C8);
- }
-
- /* report the clocking mode of the controller */
- if (!pdev_is_sata(dev)) {
- static const char *clk_str[] =
- { "== 100", "== 133", "== 2X PCI", "DISABLED!" };
-
- tmp >>= 4;
- printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
- pci_name(dev), clk_str[tmp & 3]);
- }
-
- return 0;
-}
-
-/**
- * init_mmio_iops_siimage - set up the iops for MMIO
- * @hwif: interface to set up
- *
- * The basic setup here is fairly simple, we can use standard MMIO
- * operations. However we do have to set the taskfile register offsets
- * by hand as there isn't a standard defined layout for them this time.
- *
- * The hardware supports buffered taskfiles and also some rather nice
- * extended PRD tables. For better SI3112 support use the libata driver
- */
-
-static void init_mmio_iops_siimage(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- void *addr = host->host_priv;
- u8 ch = hwif->channel;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- unsigned long base;
-
- /*
- * Fill in the basic hwif bits
- */
- hwif->host_flags |= IDE_HFLAG_MMIO;
-
- hwif->hwif_data = addr;
-
- /*
- * Now set up the hw. We have to do this ourselves as the
- * MMIO layout isn't the same as the standard port based I/O.
- */
- memset(io_ports, 0, sizeof(*io_ports));
-
- base = (unsigned long)addr;
- if (ch)
- base += 0xC0;
- else
- base += 0x80;
-
- /*
- * The buffered task file doesn't have status/control, so we
- * can't currently use it sanely since we want to use LBA48 mode.
- */
- io_ports->data_addr = base;
- io_ports->error_addr = base + 1;
- io_ports->nsect_addr = base + 2;
- io_ports->lbal_addr = base + 3;
- io_ports->lbam_addr = base + 4;
- io_ports->lbah_addr = base + 5;
- io_ports->device_addr = base + 6;
- io_ports->status_addr = base + 7;
- io_ports->ctl_addr = base + 10;
-
- if (pdev_is_sata(dev)) {
- base = (unsigned long)addr;
- if (ch)
- base += 0x80;
- hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
- hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108;
- hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100;
- }
-
- hwif->irq = dev->irq;
-
- hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
-}
-
-static int is_dev_seagate_sata(ide_drive_t *drive)
-{
- const char *s = (const char *)&drive->id[ATA_ID_PROD];
- unsigned len = strnlen(s, ATA_ID_PROD_LEN);
-
- if ((len > 4) && (!memcmp(s, "ST", 2)))
- if ((!memcmp(s + len - 2, "AS", 2)) ||
- (!memcmp(s + len - 3, "ASL", 3))) {
- printk(KERN_INFO "%s: applying pessimistic Seagate "
- "errata fix\n", drive->name);
- return 1;
- }
-
- return 0;
-}
-
-/**
- * sil_quirkproc - post probe fixups
- * @drive: drive
- *
- * Called after drive probe we use this to decide whether the
- * Seagate fixup must be applied. This used to be in init_iops but
- * that can occur before we know what drives are present.
- */
-
-static void sil_quirkproc(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- /* Try and rise the rqsize */
- if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
- hwif->rqsize = 128;
-}
-
-/**
- * init_iops_siimage - set up iops
- * @hwif: interface to set up
- *
- * Do the basic setup for the SIIMAGE hardware interface
- * and then do the MMIO setup if we can. This is the first
- * look in we get for setting up the hwif so that we
- * can get the iops right before using them.
- */
-
-static void init_iops_siimage(ide_hwif_t *hwif)
-{
- struct ide_host *host = dev_get_drvdata(hwif->dev);
-
- hwif->hwif_data = NULL;
-
- /* Pessimal until we finish probing */
- hwif->rqsize = 15;
-
- if (host->host_priv)
- init_mmio_iops_siimage(hwif);
-}
-
-/**
- * sil_cable_detect - cable detection
- * @hwif: interface to check
- *
- * Check for the presence of an ATA66 capable cable on the interface.
- */
-
-static u8 sil_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long addr = siimage_selreg(hwif, 0);
- u8 ata66 = sil_ioread8(dev, addr);
-
- return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops sil_pata_port_ops = {
- .set_pio_mode = sil_set_pio_mode,
- .set_dma_mode = sil_set_dma_mode,
- .quirkproc = sil_quirkproc,
- .test_irq = sil_test_irq,
- .udma_filter = sil_pata_udma_filter,
- .cable_detect = sil_cable_detect,
-};
-
-static const struct ide_port_ops sil_sata_port_ops = {
- .set_pio_mode = sil_set_pio_mode,
- .set_dma_mode = sil_set_dma_mode,
- .reset_poll = sil_sata_reset_poll,
- .pre_reset = sil_sata_pre_reset,
- .quirkproc = sil_quirkproc,
- .test_irq = sil_test_irq,
- .udma_filter = sil_sata_udma_filter,
- .cable_detect = sil_cable_detect,
-};
-
-static const struct ide_dma_ops sil_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = siimage_dma_test_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-#define DECLARE_SII_DEV(p_ops) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_siimage, \
- .init_iops = init_iops_siimage, \
- .port_ops = p_ops, \
- .dma_ops = &sil_dma_ops, \
- .pio_mask = ATA_PIO4, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = ATA_UDMA6, \
- }
-
-static const struct ide_port_info siimage_chipsets[] = {
- /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops),
- /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
-};
-
-/**
- * siimage_init_one - PCI layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an SiI680 or SiI3112 controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- void __iomem *ioaddr = NULL;
- resource_size_t bar5 = pci_resource_start(dev, 5);
- unsigned long barsize = pci_resource_len(dev, 5);
- int rc;
- struct ide_port_info d;
- u8 idx = id->driver_data;
- u8 BA5_EN;
-
- d = siimage_chipsets[idx];
-
- if (idx) {
- static int first = 1;
-
- if (first) {
- printk(KERN_INFO DRV_NAME ": For full SATA support you "
- "should use the libata sata_sil module.\n");
- first = 0;
- }
-
- d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- }
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- pci_read_config_byte(dev, 0x8A, &BA5_EN);
- if ((BA5_EN & 0x01) || bar5) {
- /*
- * Drop back to PIO if we can't map the MMIO. Some systems
- * seem to get terminally confused in the PCI spaces.
- */
- if (!request_mem_region(bar5, barsize, d.name)) {
- printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
- "available\n", pci_name(dev));
- } else {
- ioaddr = pci_ioremap_bar(dev, 5);
- if (ioaddr == NULL)
- release_mem_region(bar5, barsize);
- }
- }
-
- rc = ide_pci_init_one(dev, &d, ioaddr);
- if (rc) {
- if (ioaddr) {
- iounmap(ioaddr);
- release_mem_region(bar5, barsize);
- }
- pci_disable_device(dev);
- }
-
- return rc;
-}
-
-static void siimage_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- void __iomem *ioaddr = host->host_priv;
-
- ide_pci_remove(dev);
-
- if (ioaddr) {
- resource_size_t bar5 = pci_resource_start(dev, 5);
- unsigned long barsize = pci_resource_len(dev, 5);
-
- iounmap(ioaddr);
- release_mem_region(bar5, barsize);
- }
-
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id siimage_pci_tbl[] = {
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), 0 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112), 1 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
-#endif
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
-
-static struct pci_driver siimage_pci_driver = {
- .name = "SiI_IDE",
- .id_table = siimage_pci_tbl,
- .probe = siimage_init_one,
- .remove = siimage_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init siimage_ide_init(void)
-{
- return ide_pci_register_driver(&siimage_pci_driver);
-}
-
-static void __exit siimage_ide_exit(void)
-{
- pci_unregister_driver(&siimage_pci_driver);
-}
-
-module_init(siimage_ide_init);
-module_exit(siimage_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for SiI IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
deleted file mode 100644
index 1a700bef6c56..000000000000
--- a/drivers/ide/sis5513.c
+++ /dev/null
@@ -1,637 +0,0 @@
-/*
- * Copyright (C) 1999-2000 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@...t6.fr>, Maintainer
- * Copyright (C) 2003 Vojtech Pavlik <vojtech@...e.cz>
- * Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- *
- * Thanks :
- *
- * SiS Taiwan : for direct support and hardware.
- * Daniela Engert : for initial ATA100 advices and numerous others.
- * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt :
- * for checking code correctness, providing patches.
- *
- *
- * Original tests and design on the SiS620 chipset.
- * ATA100 tests and design on the SiS735 chipset.
- * ATA16/33 support from specs
- * ATA133 support for SiS961/962 by L.C. Chang <lcchang@....com.tw>
- * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@...e.cz>
- *
- * Documentation:
- * SiS chipset documentation available under NDA to companies only
- * (not to individuals).
- */
-
-/*
- * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
- * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
- * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
- *
- * Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
- * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
- * can figure out that we have a more modern and more capable 5513 by looking
- * for the respective NorthBridge IDs.
- *
- * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
- * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
- * ID, while the now ATA-133 capable 5513 still has the same PCI ID.
- * Fortunately the 5513 can be 'unmasked' by fiddling with some config space
- * bits, changing its device id to the true one - 5517 for 961 and 5518 for
- * 962/963.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "sis5513"
-
-/* registers layout and init values are chipset family dependent */
-#undef ATA_16
-#define ATA_16 0x01
-#define ATA_33 0x02
-#define ATA_66 0x03
-#define ATA_100a 0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */
-#define ATA_100 0x05
-#define ATA_133a 0x06 /* SiS961b with 133 support */
-#define ATA_133 0x07 /* SiS962/963 */
-
-static u8 chipset_family;
-
-/*
- * Devices supported
- */
-static const struct {
- const char *name;
- u16 host_id;
- u8 chipset_family;
- u8 flags;
-} SiSHostChipInfo[] = {
- { "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 },
- { "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 },
- { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 },
- { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 },
- { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 },
- { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 },
- { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 },
- { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 },
-
- { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a },
- { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a },
-
- { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 },
- { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 },
- { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 },
- { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 },
- { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 },
-
- { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 },
- { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 },
- { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 },
- { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 },
- { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 },
- { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 },
-
- { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 },
- { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 },
- { "SiS5517", PCI_DEVICE_ID_SI_5517, ATA_16 },
- { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 },
-};
-
-/* Cycle time bits and values vary across chip dma capabilities
- These three arrays hold the register layout and the values to set.
- Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
-
-/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
-static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 };
-static u8 cycle_time_range[] = { 0, 0, 2, 3, 3, 4, 4 };
-static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 3, 2, 1, 0, 0, 0, 0 }, /* ATA_33 */
- { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_66 */
- { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific),
- different cycle_time range and offset */
- { 11, 7, 5, 4, 2, 1, 0 }, /* ATA_100 */
- { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */
- { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */
-};
-/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
- See SiS962 data sheet for more detail */
-static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 2, 1, 1, 0, 0, 0, 0 },
- { 4, 3, 2, 1, 0, 0, 0 },
- { 4, 3, 2, 1, 0, 0, 0 },
- { 6, 4, 3, 1, 1, 1, 0 },
- { 9, 6, 4, 2, 2, 2, 2 },
- { 9, 6, 4, 2, 2, 2, 2 },
-};
-/* Initialize time, Active time, Recovery time vary across
- IDE clock settings. These 3 arrays hold the register value
- for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
-static u8 ini_time_value[][8] = {
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 2, 1, 0, 0, 0, 1, 0, 0 },
- { 4, 3, 1, 1, 1, 3, 1, 1 },
- { 4, 3, 1, 1, 1, 3, 1, 1 },
- { 6, 4, 2, 2, 2, 4, 2, 2 },
- { 9, 6, 3, 3, 3, 6, 3, 3 },
- { 9, 6, 3, 3, 3, 6, 3, 3 },
-};
-static u8 act_time_value[][8] = {
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 9, 9, 9, 2, 2, 7, 2, 2 },
- { 19, 19, 19, 5, 4, 14, 5, 4 },
- { 19, 19, 19, 5, 4, 14, 5, 4 },
- { 28, 28, 28, 7, 6, 21, 7, 6 },
- { 38, 38, 38, 10, 9, 28, 10, 9 },
- { 38, 38, 38, 10, 9, 28, 10, 9 },
-};
-static u8 rco_time_value[][8] = {
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 9, 2, 0, 2, 0, 7, 1, 1 },
- { 19, 5, 1, 5, 2, 16, 3, 2 },
- { 19, 5, 1, 5, 2, 16, 3, 2 },
- { 30, 9, 3, 9, 4, 25, 6, 4 },
- { 40, 12, 4, 12, 5, 34, 12, 5 },
- { 40, 12, 4, 12, 5, 34, 12, 5 },
-};
-
-/*
- * Printing configuration
- */
-/* Used for chipset type printing at boot time */
-static char *chipset_capability[] = {
- "ATA", "ATA 16",
- "ATA 33", "ATA 66",
- "ATA 100 (1st gen)", "ATA 100 (2nd gen)",
- "ATA 133 (1st gen)", "ATA 133 (2nd gen)"
-};
-
-/*
- * Configuration functions
- */
-
-static u8 sis_ata133_get_base(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 reg54 = 0;
-
- pci_read_config_dword(dev, 0x54, ®54);
-
- return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
-}
-
-static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u16 t1 = 0;
- u8 drive_pci = 0x40 + drive->dn * 2;
-
- const u16 pio_timings[] = { 0x000, 0x607, 0x404, 0x303, 0x301 };
- const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 };
-
- pci_read_config_word(dev, drive_pci, &t1);
-
- /* clear active/recovery timings */
- t1 &= ~0x070f;
- if (mode >= XFER_MW_DMA_0) {
- if (chipset_family > ATA_16)
- t1 &= ~0x8000; /* disable UDMA */
- t1 |= mwdma_timings[mode - XFER_MW_DMA_0];
- } else
- t1 |= pio_timings[mode - XFER_PIO_0];
-
- pci_write_config_word(dev, drive_pci, t1);
-}
-
-static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 t1, drive_pci = 0x40 + drive->dn * 2;
-
- /* timing bits: 7:4 active 3:0 recovery */
- const u8 pio_timings[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
- const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 };
-
- if (mode >= XFER_MW_DMA_0) {
- u8 t2 = 0;
-
- pci_read_config_byte(dev, drive_pci, &t2);
- t2 &= ~0x80; /* disable UDMA */
- pci_write_config_byte(dev, drive_pci, t2);
-
- t1 = mwdma_timings[mode - XFER_MW_DMA_0];
- } else
- t1 = pio_timings[mode - XFER_PIO_0];
-
- pci_write_config_byte(dev, drive_pci + 1, t1);
-}
-
-static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 t1 = 0;
- u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
-
- pci_read_config_dword(dev, drive_pci, &t1);
-
- t1 &= 0xc0c00fff;
- clk = (t1 & 0x08) ? ATA_133 : ATA_100;
- if (mode >= XFER_MW_DMA_0) {
- t1 &= ~0x04; /* disable UDMA */
- idx = mode - XFER_MW_DMA_0 + 5;
- } else
- idx = mode - XFER_PIO_0;
- t1 |= ini_time_value[clk][idx] << 12;
- t1 |= act_time_value[clk][idx] << 16;
- t1 |= rco_time_value[clk][idx] << 24;
-
- pci_write_config_dword(dev, drive_pci, t1);
-}
-
-static void sis_program_timings(ide_drive_t *drive, const u8 mode)
-{
- if (chipset_family < ATA_100) /* ATA_16/33/66/100a */
- sis_ata16_program_timings(drive, mode);
- else if (chipset_family < ATA_133) /* ATA_100/133a */
- sis_ata100_program_timings(drive, mode);
- else /* ATA_133 */
- sis_ata133_program_timings(drive, mode);
-}
-
-static void config_drive_art_rwp(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg4bh = 0;
- u8 rw_prefetch = 0;
-
- pci_read_config_byte(dev, 0x4b, ®4bh);
-
- rw_prefetch = reg4bh & ~(0x11 << drive->dn);
-
- if (drive->media == ide_disk)
- rw_prefetch |= 0x11 << drive->dn;
-
- if (reg4bh != rw_prefetch)
- pci_write_config_byte(dev, 0x4b, rw_prefetch);
-}
-
-static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- config_drive_art_rwp(drive);
- sis_program_timings(drive, drive->pio_mode);
-}
-
-static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 regdw = 0;
- u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
-
- pci_read_config_dword(dev, drive_pci, ®dw);
-
- regdw |= 0x04;
- regdw &= 0xfffff00f;
- /* check if ATA133 enable */
- clk = (regdw & 0x08) ? ATA_133 : ATA_100;
- idx = mode - XFER_UDMA_0;
- regdw |= cycle_time_value[clk][idx] << 4;
- regdw |= cvs_time_value[clk][idx] << 8;
-
- pci_write_config_dword(dev, drive_pci, regdw);
-}
-
-static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
-
- pci_read_config_byte(dev, drive_pci + 1, ®);
-
- /* force the UDMA bit on if we want to use UDMA */
- reg |= 0x80;
- /* clean reg cycle time bits */
- reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]);
- /* set reg cycle time bits */
- reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i];
-
- pci_write_config_byte(dev, drive_pci + 1, reg);
-}
-
-static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
- if (chipset_family >= ATA_133) /* ATA_133 */
- sis_ata133_program_udma_timings(drive, mode);
- else /* ATA_33/66/100a/100/133a */
- sis_ata33_program_udma_timings(drive, mode);
-}
-
-static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- const u8 speed = drive->dma_mode;
-
- if (speed >= XFER_UDMA_0)
- sis_program_udma_timings(drive, speed);
- else
- sis_program_timings(drive, speed);
-}
-
-static u8 sis_ata133_udma_filter(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 regdw = 0;
- u8 drive_pci = sis_ata133_get_base(drive);
-
- pci_read_config_dword(dev, drive_pci, ®dw);
-
- /* if ATA133 disable, we should not set speed above UDMA5 */
- return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
-}
-
-static int sis_find_family(struct pci_dev *dev)
-{
- struct pci_dev *host;
- int i = 0;
-
- chipset_family = 0;
-
- for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
-
- host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
-
- if (!host)
- continue;
-
- chipset_family = SiSHostChipInfo[i].chipset_family;
-
- /* Special case for SiS630 : 630S/ET is ATA_100a */
- if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
- if (host->revision >= 0x30)
- chipset_family = ATA_100a;
- }
- pci_dev_put(host);
-
- printk(KERN_INFO DRV_NAME " %s: %s %s controller\n",
- pci_name(dev), SiSHostChipInfo[i].name,
- chipset_capability[chipset_family]);
- }
-
- if (!chipset_family) { /* Belongs to pci-quirks */
-
- u32 idemisc;
- u16 trueid;
-
- /* Disable ID masking and register remapping */
- pci_read_config_dword(dev, 0x54, &idemisc);
- pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
- pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
- pci_write_config_dword(dev, 0x54, idemisc);
-
- if (trueid == 0x5518) {
- printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
- pci_name(dev));
- chipset_family = ATA_133;
-
- /* Check for 5513 compatibility mapping
- * We must use this, else the port enabled code will fail,
- * as it expects the enablebits at 0x4a.
- */
- if ((idemisc & 0x40000000) == 0) {
- pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
- printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n",
- pci_name(dev));
- }
- }
- }
-
- if (!chipset_family) { /* Belongs to pci-quirks */
-
- struct pci_dev *lpc_bridge;
- u16 trueid;
- u8 prefctl;
- u8 idecfg;
-
- pci_read_config_byte(dev, 0x4a, &idecfg);
- pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
- pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
- pci_write_config_byte(dev, 0x4a, idecfg);
-
- if (trueid == 0x5517) { /* SiS 961/961B */
-
- lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
- pci_read_config_byte(dev, 0x49, &prefctl);
- pci_dev_put(lpc_bridge);
-
- if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
- printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
- pci_name(dev));
- chipset_family = ATA_133a;
- } else {
- printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
- pci_name(dev));
- chipset_family = ATA_100;
- }
- }
- }
-
- return chipset_family;
-}
-
-static int init_chipset_sis5513(struct pci_dev *dev)
-{
- /* Make general config ops here
- 1/ tell IDE channels to operate in Compatibility mode only
- 2/ tell old chips to allow per drive IDE timings */
-
- u8 reg;
- u16 regw;
-
- switch (chipset_family) {
- case ATA_133:
- /* SiS962 operation mode */
- pci_read_config_word(dev, 0x50, ®w);
- if (regw & 0x08)
- pci_write_config_word(dev, 0x50, regw&0xfff7);
- pci_read_config_word(dev, 0x52, ®w);
- if (regw & 0x08)
- pci_write_config_word(dev, 0x52, regw&0xfff7);
- break;
- case ATA_133a:
- case ATA_100:
- /* Fixup latency */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
- /* Set compatibility bit */
- pci_read_config_byte(dev, 0x49, ®);
- if (!(reg & 0x01))
- pci_write_config_byte(dev, 0x49, reg|0x01);
- break;
- case ATA_100a:
- case ATA_66:
- /* Fixup latency */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
-
- /* On ATA_66 chips the bit was elsewhere */
- pci_read_config_byte(dev, 0x52, ®);
- if (!(reg & 0x04))
- pci_write_config_byte(dev, 0x52, reg|0x04);
- break;
- case ATA_33:
- /* On ATA_33 we didn't have a single bit to set */
- pci_read_config_byte(dev, 0x09, ®);
- if ((reg & 0x0f) != 0x00)
- pci_write_config_byte(dev, 0x09, reg&0xf0);
- fallthrough;
- case ATA_16:
- /* force per drive recovery and active timings
- needed on ATA_33 and below chips */
- pci_read_config_byte(dev, 0x52, ®);
- if (!(reg & 0x08))
- pci_write_config_byte(dev, 0x52, reg|0x08);
- break;
- }
-
- return 0;
-}
-
-struct sis_laptop {
- u16 device;
- u16 subvendor;
- u16 subdevice;
-};
-
-static const struct sis_laptop sis_laptop[] = {
- /* devid, subvendor, subdev */
- { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
- { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */
- { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
- /* end marker */
- { 0, }
-};
-
-static u8 sis_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- const struct sis_laptop *lap = &sis_laptop[0];
- u8 ata66 = 0;
-
- while (lap->device) {
- if (lap->device == pdev->device &&
- lap->subvendor == pdev->subsystem_vendor &&
- lap->subdevice == pdev->subsystem_device)
- return ATA_CBL_PATA40_SHORT;
- lap++;
- }
-
- if (chipset_family >= ATA_133) {
- u16 regw = 0;
- u16 reg_addr = hwif->channel ? 0x52: 0x50;
- pci_read_config_word(pdev, reg_addr, ®w);
- ata66 = (regw & 0x8000) ? 0 : 1;
- } else if (chipset_family >= ATA_66) {
- u8 reg48h = 0;
- u8 mask = hwif->channel ? 0x20 : 0x10;
- pci_read_config_byte(pdev, 0x48, ®48h);
- ata66 = (reg48h & mask) ? 0 : 1;
- }
-
- return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops sis_port_ops = {
- .set_pio_mode = sis_set_pio_mode,
- .set_dma_mode = sis_set_dma_mode,
- .cable_detect = sis_cable_detect,
-};
-
-static const struct ide_port_ops sis_ata133_port_ops = {
- .set_pio_mode = sis_set_pio_mode,
- .set_dma_mode = sis_set_dma_mode,
- .udma_filter = sis_ata133_udma_filter,
- .cable_detect = sis_cable_detect,
-};
-
-static const struct ide_port_info sis5513_chipset = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_sis5513,
- .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
- .host_flags = IDE_HFLAG_NO_AUTODMA,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = sis5513_chipset;
- u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- if (sis_find_family(dev) == 0)
- return -ENOTSUPP;
-
- if (chipset_family >= ATA_133)
- d.port_ops = &sis_ata133_port_ops;
- else
- d.port_ops = &sis_port_ops;
-
- d.udma_mask = udma_rates[chipset_family];
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static void sis5513_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id sis5513_pci_tbl[] = {
- { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 },
- { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 },
- { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_1180), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
-
-static struct pci_driver sis5513_pci_driver = {
- .name = "SIS_IDE",
- .id_table = sis5513_pci_tbl,
- .probe = sis5513_init_one,
- .remove = sis5513_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init sis5513_ide_init(void)
-{
- return ide_pci_register_driver(&sis5513_pci_driver);
-}
-
-static void __exit sis5513_ide_exit(void)
-{
- pci_unregister_driver(&sis5513_pci_driver);
-}
-
-module_init(sis5513_ide_init);
-module_exit(sis5513_ide_exit);
-
-MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
-MODULE_DESCRIPTION("PCI driver module for SIS IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
deleted file mode 100644
index 5c24c420c438..000000000000
--- a/drivers/ide/sl82c105.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SL82C105/Winbond 553 IDE driver
- *
- * Maintainer unknown.
- *
- * Drive tuning added from Rebel.com's kernel sources
- * -- Russell King (15/11/98) linux@....linux.org.uk
- *
- * Merge in Russell's HW workarounds, fix various problems
- * with the timing registers setup.
- * -- Benjamin Herrenschmidt (01/11/03) benh@...nel.crashing.org
- *
- * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@...sta.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "sl82c105"
-
-/*
- * SL82C105 PCI config register 0x40 bits.
- */
-#define CTRL_IDE_IRQB (1 << 30)
-#define CTRL_IDE_IRQA (1 << 28)
-#define CTRL_LEGIRQ (1 << 11)
-#define CTRL_P1F16 (1 << 5)
-#define CTRL_P1EN (1 << 4)
-#define CTRL_P0F16 (1 << 1)
-#define CTRL_P0EN (1 << 0)
-
-/*
- * Convert a PIO mode and cycle time to the required on/off times
- * for the interface. This has protection against runaway timings.
- */
-static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
-{
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- unsigned int cmd_on, cmd_off;
- u8 iordy = 0;
-
- cmd_on = (t->active + 29) / 30;
- cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
-
- if (cmd_on == 0)
- cmd_on = 1;
-
- if (cmd_off == 0)
- cmd_off = 1;
-
- if (ide_pio_need_iordy(drive, pio))
- iordy = 0x40;
-
- return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
-}
-
-/*
- * Configure the chipset for PIO mode.
- */
-static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long timings = (unsigned long)ide_get_drivedata(drive);
- int reg = 0x44 + drive->dn * 4;
- u16 drv_ctrl;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- drv_ctrl = get_pio_timings(drive, pio);
-
- /*
- * Store the PIO timings so that we can restore them
- * in case DMA will be turned off...
- */
- timings &= 0xffff0000;
- timings |= drv_ctrl;
- ide_set_drivedata(drive, (void *)timings);
-
- pci_write_config_word(dev, reg, drv_ctrl);
- pci_read_config_word (dev, reg, &drv_ctrl);
-
- printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
- ide_xfer_verbose(pio + XFER_PIO_0),
- ide_pio_cycle_time(drive, pio), drv_ctrl);
-}
-
-/*
- * Configure the chipset for DMA mode.
- */
-static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
- unsigned long timings = (unsigned long)ide_get_drivedata(drive);
- u16 drv_ctrl;
- const u8 speed = drive->dma_mode;
-
- drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
-
- /*
- * Store the DMA timings so that we can actually program
- * them when DMA will be turned on...
- */
- timings &= 0x0000ffff;
- timings |= (unsigned long)drv_ctrl << 16;
- ide_set_drivedata(drive, (void *)timings);
-}
-
-static int sl82c105_test_irq(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
-
- pci_read_config_dword(dev, 0x40, &val);
-
- return (val & mask) ? 1 : 0;
-}
-
-/*
- * The SL82C105 holds off all IDE interrupts while in DMA mode until
- * all DMA activity is completed. Sometimes this causes problems (eg,
- * when the drive wants to report an error condition).
- *
- * 0x7e is a "chip testing" register. Bit 2 resets the DMA controller
- * state machine. We need to kick this to work around various bugs.
- */
-static inline void sl82c105_reset_host(struct pci_dev *dev)
-{
- u16 val;
-
- pci_read_config_word(dev, 0x7e, &val);
- pci_write_config_word(dev, 0x7e, val | (1 << 2));
- pci_write_config_word(dev, 0x7e, val & ~(1 << 2));
-}
-
-/*
- * If we get an IRQ timeout, it might be that the DMA state machine
- * got confused. Fix from Todd Inglett. Details from Winbond.
- *
- * This function is called when the IDE timer expires, the drive
- * indicates that it is READY, and we were waiting for DMA to complete.
- */
-static void sl82c105_dma_lost_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
- u8 dma_cmd;
-
- printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n");
-
- /*
- * Check the raw interrupt from the drive.
- */
- pci_read_config_dword(dev, 0x40, &val);
- if (val & mask)
- printk(KERN_INFO "sl82c105: drive was requesting IRQ, "
- "but host lost it\n");
-
- /*
- * Was DMA enabled? If so, disable it - we're resetting the
- * host. The IDE layer will be handling the drive for us.
- */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- if (dma_cmd & 1) {
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- printk(KERN_INFO "sl82c105: DMA was enabled\n");
- }
-
- sl82c105_reset_host(dev);
-}
-
-/*
- * ATAPI devices can cause the SL82C105 DMA state machine to go gaga.
- * Winbond recommend that the DMA state machine is reset prior to
- * setting the bus master DMA enable bit.
- *
- * The generic IDE core will have disabled the BMEN bit before this
- * function is called.
- */
-static void sl82c105_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int reg = 0x44 + drive->dn * 4;
-
- pci_write_config_word(dev, reg,
- (unsigned long)ide_get_drivedata(drive) >> 16);
-
- sl82c105_reset_host(dev);
- ide_dma_start(drive);
-}
-
-static void sl82c105_dma_clear(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-
- sl82c105_reset_host(dev);
-}
-
-static int sl82c105_dma_end(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- int reg = 0x44 + drive->dn * 4;
- int ret = ide_dma_end(drive);
-
- pci_write_config_word(dev, reg,
- (unsigned long)ide_get_drivedata(drive));
-
- return ret;
-}
-
-/*
- * ATA reset will clear the 16 bits mode in the control
- * register, we need to reprogram it
- */
-static void sl82c105_resetproc(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 val;
-
- pci_read_config_dword(dev, 0x40, &val);
- val |= (CTRL_P1F16 | CTRL_P0F16);
- pci_write_config_dword(dev, 0x40, val);
-}
-
-/*
- * Return the revision of the Winbond bridge
- * which this function is part of.
- */
-static u8 sl82c105_bridge_revision(struct pci_dev *dev)
-{
- struct pci_dev *bridge;
-
- /*
- * The bridge should be part of the same device, but function 0.
- */
- bridge = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
- dev->bus->number,
- PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
- if (!bridge)
- return -1;
-
- /*
- * Make sure it is a Winbond 553 and is an ISA bridge.
- */
- if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
- bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
- bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) {
- pci_dev_put(bridge);
- return -1;
- }
- /*
- * We need to find function 0's revision, not function 1
- */
- pci_dev_put(bridge);
-
- return bridge->revision;
-}
-
-/*
- * Enable the PCI device
- *
- * --BenH: It's arch fixup code that should enable channels that
- * have not been enabled by firmware. I decided we can still enable
- * channel 0 here at least, but channel 1 has to be enabled by
- * firmware or arch code. We still set both to 16 bits mode.
- */
-static int init_chipset_sl82c105(struct pci_dev *dev)
-{
- u32 val;
-
- pci_read_config_dword(dev, 0x40, &val);
- val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
- pci_write_config_dword(dev, 0x40, val);
-
- return 0;
-}
-
-static const struct ide_port_ops sl82c105_port_ops = {
- .set_pio_mode = sl82c105_set_pio_mode,
- .set_dma_mode = sl82c105_set_dma_mode,
- .resetproc = sl82c105_resetproc,
- .test_irq = sl82c105_test_irq,
-};
-
-static const struct ide_dma_ops sl82c105_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = sl82c105_dma_start,
- .dma_end = sl82c105_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = sl82c105_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_clear = sl82c105_dma_clear,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info sl82c105_chipset = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_sl82c105,
- .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
- .port_ops = &sl82c105_port_ops,
- .dma_ops = &sl82c105_dma_ops,
- .host_flags = IDE_HFLAG_IO_32BIT |
- IDE_HFLAG_UNMASK_IRQS |
- IDE_HFLAG_SERIALIZE_DMA |
- IDE_HFLAG_NO_AUTODMA,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = sl82c105_chipset;
- u8 rev = sl82c105_bridge_revision(dev);
-
- if (rev <= 5) {
- /*
- * Never ever EVER under any circumstances enable
- * DMA when the bridge is this old.
- */
- printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge "
- "revision %d, BM-DMA disabled\n", rev);
- d.dma_ops = NULL;
- d.mwdma_mask = 0;
- d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id sl82c105_pci_tbl[] = {
- { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);
-
-static struct pci_driver sl82c105_pci_driver = {
- .name = "W82C105_IDE",
- .id_table = sl82c105_pci_tbl,
- .probe = sl82c105_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init sl82c105_ide_init(void)
-{
- return ide_pci_register_driver(&sl82c105_pci_driver);
-}
-
-static void __exit sl82c105_ide_exit(void)
-{
- pci_unregister_driver(&sl82c105_pci_driver);
-}
-
-module_init(sl82c105_ide_init);
-module_exit(sl82c105_ide_exit);
-
-MODULE_DESCRIPTION("PCI driver module for W82C105 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
deleted file mode 100644
index f521d5ebf916..000000000000
--- a/drivers/ide/slc90e66.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2000-2002 Andre Hedrick <andre@...ux-ide.org>
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@...sta.com>
- *
- * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
- * but this keeps the ISA-Bridge and slots alive.
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "slc90e66"
-
-static DEFINE_SPINLOCK(slc90e66_lock);
-
-static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int is_slave = drive->dn & 1;
- int master_port = hwif->channel ? 0x42 : 0x40;
- int slave_port = 0x44;
- unsigned long flags;
- u16 master_data;
- u8 slave_data;
- int control = 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /* ISP RTC */
- static const u8 timings[][2] = {
- { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- spin_lock_irqsave(&slc90e66_lock, flags);
- pci_read_config_word(dev, master_port, &master_data);
-
- if (pio > 1)
- control |= 1; /* Programmable timing on */
- if (drive->media == ide_disk)
- control |= 4; /* Prefetch, post write */
- if (ide_pio_need_iordy(drive, pio))
- control |= 2; /* IORDY */
- if (is_slave) {
- master_data |= 0x4000;
- master_data &= ~0x0070;
- if (pio > 1) {
- /* Set PPE, IE and TIME */
- master_data |= control << 4;
- }
- pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data &= hwif->channel ? 0x0f : 0xf0;
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
- (hwif->channel ? 4 : 0);
- } else {
- master_data &= ~0x3307;
- if (pio > 1) {
- /* enable PPE, IE and TIME */
- master_data |= control;
- }
- master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
- }
- pci_write_config_word(dev, master_port, master_data);
- if (is_slave)
- pci_write_config_byte(dev, slave_port, slave_data);
- spin_unlock_irqrestore(&slc90e66_lock, flags);
-}
-
-static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 maslave = hwif->channel ? 0x42 : 0x40;
- int sitre = 0, a_speed = 7 << (drive->dn * 4);
- int u_speed = 0, u_flag = 1 << drive->dn;
- u16 reg4042, reg44, reg48, reg4a;
- const u8 speed = drive->dma_mode;
-
- pci_read_config_word(dev, maslave, ®4042);
- sitre = (reg4042 & 0x4000) ? 1 : 0;
- pci_read_config_word(dev, 0x44, ®44);
- pci_read_config_word(dev, 0x48, ®48);
- pci_read_config_word(dev, 0x4a, ®4a);
-
- if (speed >= XFER_UDMA_0) {
- u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
-
- if (!(reg48 & u_flag))
- pci_write_config_word(dev, 0x48, reg48|u_flag);
- if ((reg4a & a_speed) != u_speed) {
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
- pci_read_config_word(dev, 0x4a, ®4a);
- pci_write_config_word(dev, 0x4a, reg4a|u_speed);
- }
- } else {
- const u8 mwdma_to_pio[] = { 0, 3, 4 };
-
- if (reg48 & u_flag)
- pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
- if (reg4a & a_speed)
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-
- if (speed >= XFER_MW_DMA_0)
- drive->pio_mode =
- mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
- else
- drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
-
- slc90e66_set_pio_mode(hwif, drive);
- }
-}
-
-static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
-
- pci_read_config_byte(dev, 0x47, ®47);
-
- /* bit[0(1)]: 0:80, 1:40 */
- return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static const struct ide_port_ops slc90e66_port_ops = {
- .set_pio_mode = slc90e66_set_pio_mode,
- .set_dma_mode = slc90e66_set_dma_mode,
- .cable_detect = slc90e66_cable_detect,
-};
-
-static const struct ide_port_info slc90e66_chipset = {
- .name = DRV_NAME,
- .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} },
- .port_ops = &slc90e66_port_ops,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2_ONLY,
- .mwdma_mask = ATA_MWDMA12_ONLY,
- .udma_mask = ATA_UDMA4,
-};
-
-static int slc90e66_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &slc90e66_chipset, NULL);
-}
-
-static const struct pci_device_id slc90e66_pci_tbl[] = {
- { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
-
-static struct pci_driver slc90e66_pci_driver = {
- .name = "SLC90e66_IDE",
- .id_table = slc90e66_pci_tbl,
- .probe = slc90e66_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init slc90e66_ide_init(void)
-{
- return ide_pci_register_driver(&slc90e66_pci_driver);
-}
-
-static void __exit slc90e66_ide_exit(void)
-{
- pci_unregister_driver(&slc90e66_pci_driver);
-}
-
-module_init(slc90e66_ide_init);
-module_exit(slc90e66_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
deleted file mode 100644
index 17e6132b99bf..000000000000
--- a/drivers/ide/tc86c001.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2002 Toshiba Corporation
- * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@...sta.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/module.h>
-
-#define DRV_NAME "tc86c001"
-
-static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
- u16 mode, scr = inw(scr_port);
- const u8 speed = drive->dma_mode;
-
- switch (speed) {
- case XFER_UDMA_4: mode = 0x00c0; break;
- case XFER_UDMA_3: mode = 0x00b0; break;
- case XFER_UDMA_2: mode = 0x00a0; break;
- case XFER_UDMA_1: mode = 0x0090; break;
- case XFER_UDMA_0: mode = 0x0080; break;
- case XFER_MW_DMA_2: mode = 0x0070; break;
- case XFER_MW_DMA_1: mode = 0x0060; break;
- case XFER_MW_DMA_0: mode = 0x0050; break;
- case XFER_PIO_4: mode = 0x0400; break;
- case XFER_PIO_3: mode = 0x0300; break;
- case XFER_PIO_2: mode = 0x0200; break;
- case XFER_PIO_1: mode = 0x0100; break;
- case XFER_PIO_0:
- default: mode = 0x0000; break;
- }
-
- scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
- scr |= mode;
- outw(scr, scr_port);
-}
-
-static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- tc86c001_set_mode(hwif, drive);
-}
-
-/*
- * HACKITY HACK
- *
- * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
- * if a DMA transfer terminates prematurely, the controller leaves the device's
- * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
- * set the interrupt bit in the DMA status register), thus no PCI interrupt
- * will occur until a DMA transfer has been successfully completed.
- *
- * We work around this by initiating dummy, zero-length DMA transfer on
- * a DMA timeout expiration. I found no better way to do this with the current
- * IDE core than to temporarily replace a higher level driver's timer expiry
- * handler with our own backing up to that handler in case our recovery fails.
- */
-static int tc86c001_timer_expiry(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_expiry_t *expiry = ide_get_hwifdata(hwif);
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-
- /* Restore a higher level driver's expiry handler first. */
- hwif->expiry = expiry;
-
- if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
- unsigned long sc_base = hwif->config_data;
- unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- u8 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
-
- printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
- "attempting recovery...\n", drive->name);
-
- /* Stop DMA */
- outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
-
- /* Setup the dummy DMA transfer */
- outw(0, sc_base + 0x0a); /* Sector Count */
- outw(0, twcr_port); /* Transfer Word Count 1 or 2 */
-
- /* Start the dummy DMA transfer */
-
- /* clear R_OR_WCTR for write */
- outb(0x00, hwif->dma_base + ATA_DMA_CMD);
- /* set START_STOPBM */
- outb(0x01, hwif->dma_base + ATA_DMA_CMD);
-
- /*
- * If an interrupt was pending, it should come thru shortly.
- * If not, a higher level driver's expiry handler should
- * eventually cause some kind of recovery from the DMA stall.
- */
- return WAIT_MIN_SLEEP;
- }
-
- /* Chain to the restored expiry handler if DMA wasn't active. */
- if (likely(expiry != NULL))
- return expiry(drive);
-
- /* If there was no handler, "emulate" that for ide_timer_expiry()... */
- return -1;
-}
-
-static void tc86c001_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long sc_base = hwif->config_data;
- unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- unsigned long nsectors = blk_rq_sectors(hwif->rq);
-
- /*
- * We have to manually load the sector count and size into
- * the appropriate system control registers for DMA to work
- * with LBA48 and ATAPI devices...
- */
- outw(nsectors, sc_base + 0x0a); /* Sector Count */
- outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
-
- /* Install our timeout expiry hook, saving the current handler... */
- ide_set_hwifdata(hwif, hwif->expiry);
- hwif->expiry = &tc86c001_timer_expiry;
-
- ide_dma_start(drive);
-}
-
-static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long sc_base = pci_resource_start(dev, 5);
- u16 scr1 = inw(sc_base + 0x00);
-
- /*
- * System Control 1 Register bit 13 (PDIAGN):
- * 0=80-pin cable, 1=40-pin cable
- */
- return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static void init_hwif_tc86c001(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long sc_base = pci_resource_start(dev, 5);
- u16 scr1 = inw(sc_base + 0x00);
-
- /* System Control 1 Register bit 15 (Soft Reset) set */
- outw(scr1 | 0x8000, sc_base + 0x00);
-
- /* System Control 1 Register bit 14 (FIFO Reset) set */
- outw(scr1 | 0x4000, sc_base + 0x00);
-
- /* System Control 1 Register: reset clear */
- outw(scr1 & ~0xc000, sc_base + 0x00);
-
- /* Store the system control register base for convenience... */
- hwif->config_data = sc_base;
-
- if (!hwif->dma_base)
- return;
-
- /*
- * Sector Count Control Register bits 0 and 1 set:
- * software sets Sector Count Register for master and slave device
- */
- outw(0x0003, sc_base + 0x0c);
-
- /* Sector Count Register limit */
- hwif->rqsize = 0xffff;
-}
-
-static const struct ide_port_ops tc86c001_port_ops = {
- .set_pio_mode = tc86c001_set_pio_mode,
- .set_dma_mode = tc86c001_set_mode,
- .cable_detect = tc86c001_cable_detect,
-};
-
-static const struct ide_dma_ops tc86c001_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_start = tc86c001_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info tc86c001_chipset = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_tc86c001,
- .port_ops = &tc86c001_port_ops,
- .dma_ops = &tc86c001_dma_ops,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
-};
-
-static int tc86c001_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- goto out;
-
- rc = pci_request_region(dev, 5, DRV_NAME);
- if (rc) {
- printk(KERN_ERR DRV_NAME ": system control regs already in use");
- goto out_disable;
- }
-
- rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
- if (rc)
- goto out_release;
-
- goto out;
-
-out_release:
- pci_release_region(dev, 5);
-out_disable:
- pci_disable_device(dev);
-out:
- return rc;
-}
-
-static void tc86c001_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_release_region(dev, 5);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id tc86c001_pci_tbl[] = {
- { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
-
-static struct pci_driver tc86c001_pci_driver = {
- .name = "TC86C001",
- .id_table = tc86c001_pci_tbl,
- .probe = tc86c001_init_one,
- .remove = tc86c001_remove,
-};
-
-static int __init tc86c001_ide_init(void)
-{
- return ide_pci_register_driver(&tc86c001_pci_driver);
-}
-
-static void __exit tc86c001_ide_exit(void)
-{
- pci_unregister_driver(&tc86c001_pci_driver);
-}
-
-module_init(tc86c001_ide_init);
-module_exit(tc86c001_ide_exit);
-
-MODULE_AUTHOR("MontaVista Software, Inc. <source@...sta.com>");
-MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
deleted file mode 100644
index 16ddd0956832..000000000000
--- a/drivers/ide/triflex.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IDE Chipset driver for the Compaq TriFlex IDE controller.
- *
- * Known to work with the Compaq Workstation 5x00 series.
- *
- * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
- * Author: Torben Mathiasen <torben.mathiasen@...com>
- *
- * Loosely based on the piix & svwks drivers.
- *
- * Documentation:
- * Not publicly available.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "triflex"
-
-static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u32 triflex_timings = 0;
- u16 timing = 0;
- u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1;
-
- pci_read_config_dword(dev, channel_offset, &triflex_timings);
-
- switch (drive->dma_mode) {
- case XFER_MW_DMA_2:
- timing = 0x0103;
- break;
- case XFER_MW_DMA_1:
- timing = 0x0203;
- break;
- case XFER_MW_DMA_0:
- timing = 0x0808;
- break;
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- timing = 0x0f0f;
- break;
- case XFER_PIO_4:
- timing = 0x0202;
- break;
- case XFER_PIO_3:
- timing = 0x0204;
- break;
- case XFER_PIO_2:
- timing = 0x0404;
- break;
- case XFER_PIO_1:
- timing = 0x0508;
- break;
- case XFER_PIO_0:
- timing = 0x0808;
- break;
- }
-
- triflex_timings &= ~(0xFFFF << (16 * unit));
- triflex_timings |= (timing << (16 * unit));
-
- pci_write_config_dword(dev, channel_offset, triflex_timings);
-}
-
-static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- triflex_set_mode(hwif, drive);
-}
-
-static const struct ide_port_ops triflex_port_ops = {
- .set_pio_mode = triflex_set_pio_mode,
- .set_dma_mode = triflex_set_mode,
-};
-
-static const struct ide_port_info triflex_device = {
- .name = DRV_NAME,
- .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
- .port_ops = &triflex_port_ops,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &triflex_device, NULL);
-}
-
-static const struct pci_device_id triflex_pci_tbl[] = {
- { PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
-
-#ifdef CONFIG_PM
-static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
-{
- /*
- * We must not disable or powerdown the device.
- * APM bios refuses to suspend if IDE is not accessible.
- */
- pci_save_state(dev);
- return 0;
-}
-#else
-#define triflex_ide_pci_suspend NULL
-#endif
-
-static struct pci_driver triflex_pci_driver = {
- .name = "TRIFLEX_IDE",
- .id_table = triflex_pci_tbl,
- .probe = triflex_init_one,
- .remove = ide_pci_remove,
- .suspend = triflex_ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init triflex_ide_init(void)
-{
- return ide_pci_register_driver(&triflex_pci_driver);
-}
-
-static void __exit triflex_ide_exit(void)
-{
- pci_unregister_driver(&triflex_pci_driver);
-}
-
-module_init(triflex_ide_init);
-module_exit(triflex_ide_exit);
-
-MODULE_AUTHOR("Torben Mathiasen");
-MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE");
-MODULE_LICENSE("GPL");
-
-
diff --git a/drivers/ide/trm290.c b/drivers/ide/trm290.c
deleted file mode 100644
index d550b379b0f1..000000000000
--- a/drivers/ide/trm290.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * Copyright (c) 1997-1998 Mark Lord
- * Copyright (c) 2007 MontaVista Software, Inc. <source@...sta.com>
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * June 22, 2004 - get rid of check_region
- * - Jesper Juhl
- *
- */
-
-/*
- * This module provides support for the bus-master IDE DMA function
- * of the Tekram TRM290 chip, used on a variety of PCI IDE add-on boards,
- * including a "Precision Instruments" board. The TRM290 pre-dates
- * the sff-8038 standard (ide-dma.c) by a few months, and differs
- * significantly enough to warrant separate routines for some functions,
- * while re-using others from ide-dma.c.
- *
- * EXPERIMENTAL! It works for me (a sample of one).
- *
- * Works reliably for me in DMA mode (READs only),
- * DMA WRITEs are disabled by default (see #define below);
- *
- * DMA is not enabled automatically for this chipset,
- * but can be turned on manually (with "hdparm -d1") at run time.
- *
- * I need volunteers with "spare" drives for further testing
- * and development, and maybe to help figure out the peculiarities.
- * Even knowing the registers (below), some things behave strangely.
- */
-
-#define TRM290_NO_DMA_WRITES /* DMA writes seem unreliable sometimes */
-
-/*
- * TRM-290 PCI-IDE2 Bus Master Chip
- * ================================
- * The configuration registers are addressed in normal I/O port space
- * and are used as follows:
- *
- * trm290_base depends on jumper settings, and is probed for by ide-dma.c
- *
- * trm290_base+2 when WRITTEN: chiptest register (byte, write-only)
- * bit7 must always be written as "1"
- * bits6-2 undefined
- * bit1 1=legacy_compatible_mode, 0=native_pci_mode
- * bit0 1=test_mode, 0=normal(default)
- *
- * trm290_base+2 when READ: status register (byte, read-only)
- * bits7-2 undefined
- * bit1 channel0 busmaster interrupt status 0=none, 1=asserted
- * bit0 channel0 interrupt status 0=none, 1=asserted
- *
- * trm290_base+3 Interrupt mask register
- * bits7-5 undefined
- * bit4 legacy_header: 1=present, 0=absent
- * bit3 channel1 busmaster interrupt status 0=none, 1=asserted (read only)
- * bit2 channel1 interrupt status 0=none, 1=asserted (read only)
- * bit1 channel1 interrupt mask: 1=masked, 0=unmasked(default)
- * bit0 channel0 interrupt mask: 1=masked, 0=unmasked(default)
- *
- * trm290_base+1 "CPR" Config Pointer Register (byte)
- * bit7 1=autoincrement CPR bits 2-0 after each access of CDR
- * bit6 1=min. 1 wait-state posted write cycle (default), 0=0 wait-state
- * bit5 0=enabled master burst access (default), 1=disable (write only)
- * bit4 PCI DEVSEL# timing select: 1=medium(default), 0=fast
- * bit3 0=primary IDE channel, 1=secondary IDE channel
- * bits2-0 register index for accesses through CDR port
- *
- * trm290_base+0 "CDR" Config Data Register (word)
- * two sets of seven config registers,
- * selected by CPR bit 3 (channel) and CPR bits 2-0 (index 0 to 6),
- * each index defined below:
- *
- * Index-0 Base address register for command block (word)
- * defaults: 0x1f0 for primary, 0x170 for secondary
- *
- * Index-1 general config register (byte)
- * bit7 1=DMA enable, 0=DMA disable
- * bit6 1=activate IDE_RESET, 0=no action (default)
- * bit5 1=enable IORDY, 0=disable IORDY (default)
- * bit4 0=16-bit data port(default), 1=8-bit (XT) data port
- * bit3 interrupt polarity: 1=active_low, 0=active_high(default)
- * bit2 power-saving-mode(?): 1=enable, 0=disable(default) (write only)
- * bit1 bus_master_mode(?): 1=enable, 0=disable(default)
- * bit0 enable_io_ports: 1=enable(default), 0=disable
- *
- * Index-2 read-ahead counter preload bits 0-7 (byte, write only)
- * bits7-0 bits7-0 of readahead count
- *
- * Index-3 read-ahead config register (byte, write only)
- * bit7 1=enable_readahead, 0=disable_readahead(default)
- * bit6 1=clear_FIFO, 0=no_action
- * bit5 undefined
- * bit4 mode4 timing control: 1=enable, 0=disable(default)
- * bit3 undefined
- * bit2 undefined
- * bits1-0 bits9-8 of read-ahead count
- *
- * Index-4 base address register for control block (word)
- * defaults: 0x3f6 for primary, 0x376 for secondary
- *
- * Index-5 data port timings (shared by both drives) (byte)
- * standard PCI "clk" (clock) counts, default value = 0xf5
- *
- * bits7-6 setup time: 00=1clk, 01=2clk, 10=3clk, 11=4clk
- * bits5-3 hold time: 000=1clk, 001=2clk, 010=3clk,
- * 011=4clk, 100=5clk, 101=6clk,
- * 110=8clk, 111=12clk
- * bits2-0 active time: 000=2clk, 001=3clk, 010=4clk,
- * 011=5clk, 100=6clk, 101=8clk,
- * 110=12clk, 111=16clk
- *
- * Index-6 command/control port timings (shared by both drives) (byte)
- * same layout as Index-5, default value = 0xde
- *
- * Suggested CDR programming for PIO mode0 (600ns):
- * 0x01f0,0x21,0xff,0x80,0x03f6,0xf5,0xde ; primary
- * 0x0170,0x21,0xff,0x80,0x0376,0xf5,0xde ; secondary
- *
- * Suggested CDR programming for PIO mode3 (180ns):
- * 0x01f0,0x21,0xff,0x80,0x03f6,0x09,0xde ; primary
- * 0x0170,0x21,0xff,0x80,0x0376,0x09,0xde ; secondary
- *
- * Suggested CDR programming for PIO mode4 (120ns):
- * 0x01f0,0x21,0xff,0x80,0x03f6,0x00,0xde ; primary
- * 0x0170,0x21,0xff,0x80,0x0376,0x00,0xde ; secondary
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "trm290"
-
-static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
-{
- ide_hwif_t *hwif = drive->hwif;
- u16 reg = 0;
- unsigned long flags;
-
- /* select PIO or DMA */
- reg = use_dma ? (0x21 | 0x82) : (0x21 & ~0x82);
-
- local_irq_save(flags);
-
- if (reg != hwif->select_data) {
- hwif->select_data = reg;
- /* set PIO/DMA */
- outb(0x51 | (hwif->channel << 3), hwif->config_data + 1);
- outw(reg & 0xff, hwif->config_data);
- }
-
- /* enable IRQ if not probing */
- if (drive->dev_flags & IDE_DFLAG_PRESENT) {
- reg = inw(hwif->config_data + 3);
- reg &= 0x13;
- reg &= ~(1 << hwif->channel);
- outw(reg, hwif->config_data + 3);
- }
-
- local_irq_restore(flags);
-}
-
-static void trm290_dev_select(ide_drive_t *drive)
-{
- trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
-
- outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
-}
-
-static int trm290_dma_check(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- if (cmd->tf_flags & IDE_TFLAG_WRITE) {
-#ifdef TRM290_NO_DMA_WRITES
- /* always use PIO for writes */
- return 1;
-#endif
- }
- return 0;
-}
-
-static int trm290_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned int count, rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 2;
-
- count = ide_build_dmatable(drive, cmd);
- if (count == 0)
- /* try PIO instead of DMA */
- return 1;
-
- outl(hwif->dmatable_dma | rw, hwif->dma_base);
- /* start DMA */
- outw(count * 2 - 1, hwif->dma_base + 2);
-
- return 0;
-}
-
-static void trm290_dma_start(ide_drive_t *drive)
-{
- trm290_prepare_drive(drive, 1);
-}
-
-static int trm290_dma_end(ide_drive_t *drive)
-{
- u16 status = inw(drive->hwif->dma_base + 2);
-
- trm290_prepare_drive(drive, 0);
-
- return status != 0x00ff;
-}
-
-static int trm290_dma_test_irq(ide_drive_t *drive)
-{
- u16 status = inw(drive->hwif->dma_base + 2);
-
- return status == 0x00ff;
-}
-
-static void trm290_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static void init_hwif_trm290(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int cfg_base = pci_resource_start(dev, 4);
- unsigned long flags;
- u8 reg = 0;
-
- if ((dev->class & 5) && cfg_base)
- printk(KERN_INFO DRV_NAME " %s: chip", pci_name(dev));
- else {
- cfg_base = 0x3df0;
- printk(KERN_INFO DRV_NAME " %s: using default", pci_name(dev));
- }
- printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
- hwif->config_data = cfg_base;
- hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0);
-
- printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
- hwif->name, hwif->dma_base, hwif->dma_base + 3);
-
- if (ide_allocate_dma_engine(hwif))
- return;
-
- local_irq_save(flags);
- /* put config reg into first byte of hwif->select_data */
- outb(0x51 | (hwif->channel << 3), hwif->config_data + 1);
- /* select PIO as default */
- hwif->select_data = 0x21;
- outb(hwif->select_data, hwif->config_data);
- /* get IRQ info */
- reg = inb(hwif->config_data + 3);
- /* mask IRQs for both ports */
- reg = (reg & 0x10) | 0x03;
- outb(reg, hwif->config_data + 3);
- local_irq_restore(flags);
-
- if (reg & 0x10)
- /* legacy mode */
- hwif->irq = hwif->channel ? 15 : 14;
-
-#if 1
- {
- /*
- * My trm290-based card doesn't seem to work with all possible values
- * for the control basereg, so this kludge ensures that we use only
- * values that are known to work. Ugh. -ml
- */
- u16 new, old, compat = hwif->channel ? 0x374 : 0x3f4;
- static u16 next_offset = 0;
- u8 old_mask;
-
- outb(0x54 | (hwif->channel << 3), hwif->config_data + 1);
- old = inw(hwif->config_data);
- old &= ~1;
- old_mask = inb(old + 2);
- if (old != compat && old_mask == 0xff) {
- /* leave lower 10 bits untouched */
- compat += (next_offset += 0x400);
- hwif->io_ports.ctl_addr = compat + 2;
- outw(compat | 1, hwif->config_data);
- new = inw(hwif->config_data);
- printk(KERN_INFO "%s: control basereg workaround: "
- "old=0x%04x, new=0x%04x\n",
- hwif->name, old, new & ~1);
- }
- }
-#endif
-}
-
-static const struct ide_tp_ops trm290_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = trm290_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_dma_ops trm290_dma_ops = {
- .dma_host_set = trm290_dma_host_set,
- .dma_setup = trm290_dma_setup,
- .dma_start = trm290_dma_start,
- .dma_end = trm290_dma_end,
- .dma_test_irq = trm290_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_check = trm290_dma_check,
-};
-
-static const struct ide_port_info trm290_chipset = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_trm290,
- .tp_ops = &trm290_tp_ops,
- .dma_ops = &trm290_dma_ops,
- .host_flags = IDE_HFLAG_TRM290 |
- IDE_HFLAG_NO_ATAPI_DMA |
-#if 0 /* play it safe for now */
- IDE_HFLAG_TRUST_BIOS_FOR_DMA |
-#endif
- IDE_HFLAG_NO_AUTODMA |
- IDE_HFLAG_NO_LBA48,
-};
-
-static int trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &trm290_chipset, NULL);
-}
-
-static const struct pci_device_id trm290_pci_tbl[] = {
- { PCI_VDEVICE(TEKRAM, PCI_DEVICE_ID_TEKRAM_DC290), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, trm290_pci_tbl);
-
-static struct pci_driver trm290_pci_driver = {
- .name = "TRM290_IDE",
- .id_table = trm290_pci_tbl,
- .probe = trm290_init_one,
- .remove = ide_pci_remove,
-};
-
-static int __init trm290_ide_init(void)
-{
- return ide_pci_register_driver(&trm290_pci_driver);
-}
-
-static void __exit trm290_ide_exit(void)
-{
- pci_unregister_driver(&trm290_pci_driver);
-}
-
-module_init(trm290_ide_init);
-module_exit(trm290_ide_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for Tekram TRM290 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
deleted file mode 100644
index 962eb92501b5..000000000000
--- a/drivers/ide/tx4938ide.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * TX4938 internal IDE driver
- * Based on tx4939ide.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) Copyright TOSHIBA CORPORATION 2005-2007
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/ide.h>
-#include <asm/txx9/tx4938.h>
-
-static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
- unsigned int gbus_clock,
- u8 pio)
-{
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- u64 cr = __raw_readq(&tx4938_ebuscptr->cr[ebus_ch]);
- unsigned int sp = (cr >> 4) & 3;
- unsigned int clock = gbus_clock / (4 - sp);
- unsigned int cycle = 1000000000 / clock;
- unsigned int shwt;
- int wt;
-
- /* Minimum DIOx- active time */
- wt = DIV_ROUND_UP(t->act8b, cycle) - 2;
- /* IORDY setup time: 35ns */
- wt = max_t(int, wt, DIV_ROUND_UP(35, cycle));
- /* actual wait-cycle is max(wt & ~1, 1) */
- if (wt > 2 && (wt & 1))
- wt++;
- wt &= ~1;
- /* Address-valid to DIOR/DIOW setup */
- shwt = DIV_ROUND_UP(t->setup, cycle);
-
- /* -DIOx recovery time (SHWT * 4) and cycle time requirement */
- while ((shwt * 4 + wt + (wt ? 2 : 3)) * cycle < t->cycle)
- shwt++;
- if (shwt > 7) {
- pr_warn("tx4938ide: SHWT violation (%d)\n", shwt);
- shwt = 7;
- }
- pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n",
- ebus_ch, cycle, wt, shwt);
-
- __raw_writeq((cr & ~0x3f007ull) | (wt << 12) | shwt,
- &tx4938_ebuscptr->cr[ebus_ch]);
-}
-
-static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct tx4938ide_platform_info *pdata = dev_get_platdata(hwif->dev);
- u8 safe = drive->pio_mode - XFER_PIO_0;
- ide_drive_t *pair;
-
- pair = ide_get_pair_dev(drive);
- if (pair)
- safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0);
- tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe);
-}
-
-#ifdef __BIG_ENDIAN
-
-/* custom iops (independent from SWAP_IO_SPACE) */
-static void tx4938ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long port = drive->hwif->io_ports.data_addr;
- unsigned short *ptr = buf;
- unsigned int count = (len + 1) / 2;
-
- while (count--)
- *ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
- __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
-}
-
-static void tx4938ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long port = drive->hwif->io_ports.data_addr;
- unsigned short *ptr = buf;
- unsigned int count = (len + 1) / 2;
-
- while (count--) {
- __raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
- ptr++;
- }
- __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
-}
-
-static const struct ide_tp_ops tx4938ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = tx4938ide_input_data_swap,
- .output_data = tx4938ide_output_data_swap,
-};
-
-#endif /* __BIG_ENDIAN */
-
-static const struct ide_port_ops tx4938ide_port_ops = {
- .set_pio_mode = tx4938ide_set_pio_mode,
-};
-
-static const struct ide_port_info tx4938ide_port_info __initconst = {
- .port_ops = &tx4938ide_port_ops,
-#ifdef __BIG_ENDIAN
- .tp_ops = &tx4938ide_tp_ops,
-#endif
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO5,
- .chipset = ide_generic,
-};
-
-static int __init tx4938ide_probe(struct platform_device *pdev)
-{
- struct ide_hw hw, *hws[] = { &hw };
- struct ide_host *host;
- struct resource *res;
- struct tx4938ide_platform_info *pdata = dev_get_platdata(&pdev->dev);
- int irq, ret, i;
- unsigned long mapbase, mapctl;
- struct ide_port_info d = tx4938ide_port_info;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -ENODEV;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), "tx4938ide"))
- return -EBUSY;
- mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
- 8 << pdata->ioport_shift);
- mapctl = (unsigned long)devm_ioremap(&pdev->dev,
- res->start + 0x10000 +
- (6 << pdata->ioport_shift),
- 1 << pdata->ioport_shift);
- if (!mapbase || !mapctl)
- return -EBUSY;
-
- memset(&hw, 0, sizeof(hw));
- if (pdata->ioport_shift) {
- unsigned long port = mapbase;
- unsigned long ctl = mapctl;
-
- hw.io_ports_array[0] = port;
-#ifdef __BIG_ENDIAN
- port++;
- ctl++;
-#endif
- for (i = 1; i <= 7; i++)
- hw.io_ports_array[i] =
- port + (i << pdata->ioport_shift);
- hw.io_ports.ctl_addr = ctl;
- } else
- ide_std_init_ports(&hw, mapbase, mapctl);
- hw.irq = irq;
- hw.dev = &pdev->dev;
-
- pr_info("TX4938 IDE interface (base %#lx, ctl %#lx, irq %d)\n",
- mapbase, mapctl, hw.irq);
- if (pdata->gbus_clock)
- tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
- else
- d.port_ops = NULL;
- ret = ide_host_add(&d, hws, 1, &host);
- if (!ret)
- platform_set_drvdata(pdev, host);
- return ret;
-}
-
-static int __exit tx4938ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
-
- ide_host_remove(host);
- return 0;
-}
-
-static struct platform_driver tx4938ide_driver = {
- .driver = {
- .name = "tx4938ide",
- },
- .remove = __exit_p(tx4938ide_remove),
-};
-
-module_platform_driver_probe(tx4938ide_driver, tx4938ide_probe);
-
-MODULE_DESCRIPTION("TX4938 internal IDE driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:tx4938ide");
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
deleted file mode 100644
index b1bbf807bb3d..000000000000
--- a/drivers/ide/tx4939ide.c
+++ /dev/null
@@ -1,628 +0,0 @@
-/*
- * TX4939 internal IDE driver
- * Based on RBTX49xx patch from CELF patch archive.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) Copyright TOSHIBA CORPORATION 2005-2007
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/scatterlist.h>
-
-#include <asm/ide.h>
-
-#define MODNAME "tx4939ide"
-
-/* ATA Shadow Registers (8-bit except for Data which is 16-bit) */
-#define TX4939IDE_Data 0x000
-#define TX4939IDE_Error_Feature 0x001
-#define TX4939IDE_Sec 0x002
-#define TX4939IDE_LBA0 0x003
-#define TX4939IDE_LBA1 0x004
-#define TX4939IDE_LBA2 0x005
-#define TX4939IDE_DevHead 0x006
-#define TX4939IDE_Stat_Cmd 0x007
-#define TX4939IDE_AltStat_DevCtl 0x402
-/* H/W DMA Registers */
-#define TX4939IDE_DMA_Cmd 0x800 /* 8-bit */
-#define TX4939IDE_DMA_Stat 0x802 /* 8-bit */
-#define TX4939IDE_PRD_Ptr 0x804 /* 32-bit */
-/* ATA100 CORE Registers (16-bit) */
-#define TX4939IDE_Sys_Ctl 0xc00
-#define TX4939IDE_Xfer_Cnt_1 0xc08
-#define TX4939IDE_Xfer_Cnt_2 0xc0a
-#define TX4939IDE_Sec_Cnt 0xc10
-#define TX4939IDE_Start_Lo_Addr 0xc18
-#define TX4939IDE_Start_Up_Addr 0xc20
-#define TX4939IDE_Add_Ctl 0xc28
-#define TX4939IDE_Lo_Burst_Cnt 0xc30
-#define TX4939IDE_Up_Burst_Cnt 0xc38
-#define TX4939IDE_PIO_Addr 0xc88
-#define TX4939IDE_H_Rst_Tim 0xc90
-#define TX4939IDE_Int_Ctl 0xc98
-#define TX4939IDE_Pkt_Cmd 0xcb8
-#define TX4939IDE_Bxfer_Cnt_Hi 0xcc0
-#define TX4939IDE_Bxfer_Cnt_Lo 0xcc8
-#define TX4939IDE_Dev_TErr 0xcd0
-#define TX4939IDE_Pkt_Xfer_Ctl 0xcd8
-#define TX4939IDE_Start_TAddr 0xce0
-
-/* bits for Int_Ctl */
-#define TX4939IDE_INT_ADDRERR 0x80
-#define TX4939IDE_INT_REACHMUL 0x40
-#define TX4939IDE_INT_DEVTIMING 0x20
-#define TX4939IDE_INT_UDMATERM 0x10
-#define TX4939IDE_INT_TIMER 0x08
-#define TX4939IDE_INT_BUSERR 0x04
-#define TX4939IDE_INT_XFEREND 0x02
-#define TX4939IDE_INT_HOST 0x01
-
-#define TX4939IDE_IGNORE_INTS \
- (TX4939IDE_INT_ADDRERR | TX4939IDE_INT_REACHMUL | \
- TX4939IDE_INT_DEVTIMING | TX4939IDE_INT_UDMATERM | \
- TX4939IDE_INT_TIMER | TX4939IDE_INT_XFEREND)
-
-#ifdef __BIG_ENDIAN
-#define tx4939ide_swizzlel(a) ((a) ^ 4)
-#define tx4939ide_swizzlew(a) ((a) ^ 6)
-#define tx4939ide_swizzleb(a) ((a) ^ 7)
-#else
-#define tx4939ide_swizzlel(a) (a)
-#define tx4939ide_swizzlew(a) (a)
-#define tx4939ide_swizzleb(a) (a)
-#endif
-
-static u16 tx4939ide_readw(void __iomem *base, u32 reg)
-{
- return __raw_readw(base + tx4939ide_swizzlew(reg));
-}
-static u8 tx4939ide_readb(void __iomem *base, u32 reg)
-{
- return __raw_readb(base + tx4939ide_swizzleb(reg));
-}
-static void tx4939ide_writel(u32 val, void __iomem *base, u32 reg)
-{
- __raw_writel(val, base + tx4939ide_swizzlel(reg));
-}
-static void tx4939ide_writew(u16 val, void __iomem *base, u32 reg)
-{
- __raw_writew(val, base + tx4939ide_swizzlew(reg));
-}
-static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg)
-{
- __raw_writeb(val, base + tx4939ide_swizzleb(reg));
-}
-
-#define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base)
-
-static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- int is_slave = drive->dn;
- u32 mask, val;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- u8 safe = pio;
- ide_drive_t *pair;
-
- pair = ide_get_pair_dev(drive);
- if (pair)
- safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0);
- /*
- * Update Command Transfer Mode for master/slave and Data
- * Transfer Mode for this drive.
- */
- mask = is_slave ? 0x07f00000 : 0x000007f0;
- val = ((safe << 8) | (pio << 4)) << (is_slave ? 16 : 0);
- hwif->select_data = (hwif->select_data & ~mask) | val;
- /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
-}
-
-static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- u32 mask, val;
- const u8 mode = drive->dma_mode;
-
- /* Update Data Transfer Mode for this drive. */
- if (mode >= XFER_UDMA_0)
- val = mode - XFER_UDMA_0 + 8;
- else
- val = mode - XFER_MW_DMA_0 + 5;
- if (drive->dn) {
- mask = 0x00f00000;
- val <<= 20;
- } else {
- mask = 0x000000f0;
- val <<= 4;
- }
- hwif->select_data = (hwif->select_data & ~mask) | val;
- /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
-}
-
-static u16 tx4939ide_check_error_ints(ide_hwif_t *hwif)
-{
- void __iomem *base = TX4939IDE_BASE(hwif);
- u16 ctl = tx4939ide_readw(base, TX4939IDE_Int_Ctl);
-
- if (ctl & TX4939IDE_INT_BUSERR) {
- /* reset FIFO */
- u16 sysctl = tx4939ide_readw(base, TX4939IDE_Sys_Ctl);
-
- tx4939ide_writew(sysctl | 0x4000, base, TX4939IDE_Sys_Ctl);
- /* wait 12GBUSCLK (typ. 60ns @ GBUS200MHz, max 270ns) */
- ndelay(270);
- tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl);
- }
- if (ctl & (TX4939IDE_INT_ADDRERR |
- TX4939IDE_INT_DEVTIMING | TX4939IDE_INT_BUSERR))
- pr_err("%s: Error interrupt %#x (%s%s%s )\n",
- hwif->name, ctl,
- ctl & TX4939IDE_INT_ADDRERR ? " Address-Error" : "",
- ctl & TX4939IDE_INT_DEVTIMING ? " DEV-Timing" : "",
- ctl & TX4939IDE_INT_BUSERR ? " Bus-Error" : "");
- return ctl;
-}
-
-static void tx4939ide_clear_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif;
- void __iomem *base;
- u16 ctl;
-
- /*
- * tx4939ide_dma_test_irq() and tx4939ide_dma_end() do all job
- * for DMA case.
- */
- if (drive->waiting_for_dma)
- return;
- hwif = drive->hwif;
- base = TX4939IDE_BASE(hwif);
- ctl = tx4939ide_check_error_ints(hwif);
- tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl);
-}
-
-static u8 tx4939ide_cable_detect(ide_hwif_t *hwif)
-{
- void __iomem *base = TX4939IDE_BASE(hwif);
-
- return tx4939ide_readw(base, TX4939IDE_Sys_Ctl) & 0x2000 ?
- ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-#ifdef __BIG_ENDIAN
-static void tx4939ide_dma_host_set(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 unit = drive->dn;
- void __iomem *base = TX4939IDE_BASE(hwif);
- u8 dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat);
-
- if (on)
- dma_stat |= (1 << (5 + unit));
- else
- dma_stat &= ~(1 << (5 + unit));
-
- tx4939ide_writeb(dma_stat, base, TX4939IDE_DMA_Stat);
-}
-#else
-#define tx4939ide_dma_host_set ide_dma_host_set
-#endif
-
-static u8 tx4939ide_clear_dma_status(void __iomem *base)
-{
- u8 dma_stat;
-
- /* read DMA status for INTR & ERROR flags */
- dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat);
- /* clear INTR & ERROR flags */
- tx4939ide_writeb(dma_stat | ATA_DMA_INTR | ATA_DMA_ERR, base,
- TX4939IDE_DMA_Stat);
- /* recover intmask cleared by writing to bit2 of DMA_Stat */
- tx4939ide_writew(TX4939IDE_IGNORE_INTS << 8, base, TX4939IDE_Int_Ctl);
- return dma_stat;
-}
-
-#ifdef __BIG_ENDIAN
-/* custom ide_build_dmatable to handle swapped layout */
-static int tx4939ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- u32 *table = (u32 *)hwif->dmatable_cpu;
- unsigned int count = 0;
- int i;
- struct scatterlist *sg;
-
- for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) {
- u32 cur_addr, cur_len, bcount;
-
- cur_addr = sg_dma_address(sg);
- cur_len = sg_dma_len(sg);
-
- /*
- * Fill in the DMA table, without crossing any 64kB boundaries.
- */
-
- while (cur_len) {
- if (count++ >= PRD_ENTRIES)
- goto use_pio_instead;
-
- bcount = 0x10000 - (cur_addr & 0xffff);
- if (bcount > cur_len)
- bcount = cur_len;
- /*
- * This workaround for zero count seems required.
- * (standard ide_build_dmatable does it too)
- */
- if (bcount == 0x10000)
- bcount = 0x8000;
- *table++ = bcount & 0xffff;
- *table++ = cur_addr;
- cur_addr += bcount;
- cur_len -= bcount;
- }
- }
-
- if (count) {
- *(table - 2) |= 0x80000000;
- return count;
- }
-
-use_pio_instead:
- printk(KERN_ERR "%s: %s\n", drive->name,
- count ? "DMA table too small" : "empty DMA table?");
-
- return 0; /* revert to PIO for this request */
-}
-#else
-#define tx4939ide_build_dmatable ide_build_dmatable
-#endif
-
-static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- void __iomem *base = TX4939IDE_BASE(hwif);
- u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
-
- /* fall back to PIO! */
- if (tx4939ide_build_dmatable(drive, cmd) == 0)
- return 1;
-
- /* PRD table */
- tx4939ide_writel(hwif->dmatable_dma, base, TX4939IDE_PRD_Ptr);
-
- /* specify r/w */
- tx4939ide_writeb(rw, base, TX4939IDE_DMA_Cmd);
-
- /* clear INTR & ERROR flags */
- tx4939ide_clear_dma_status(base);
-
- tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ?
- TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1);
-
- tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt);
-
- return 0;
-}
-
-static int tx4939ide_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat, dma_cmd;
- void __iomem *base = TX4939IDE_BASE(hwif);
- u16 ctl = tx4939ide_readw(base, TX4939IDE_Int_Ctl);
-
- /* get DMA command mode */
- dma_cmd = tx4939ide_readb(base, TX4939IDE_DMA_Cmd);
- /* stop DMA */
- tx4939ide_writeb(dma_cmd & ~ATA_DMA_START, base, TX4939IDE_DMA_Cmd);
-
- /* read and clear the INTR & ERROR bits */
- dma_stat = tx4939ide_clear_dma_status(base);
-
-#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR)
-
- /* verify good DMA status */
- if ((dma_stat & CHECK_DMA_MASK) == 0 &&
- (ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) ==
- (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST))
- /* INT_IDE lost... bug? */
- return 0;
- return ((dma_stat & CHECK_DMA_MASK) !=
- ATA_DMA_INTR) ? 0x10 | dma_stat : 0;
-}
-
-/* returns 1 if DMA IRQ issued, 0 otherwise */
-static int tx4939ide_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- void __iomem *base = TX4939IDE_BASE(hwif);
- u16 ctl, ide_int;
- u8 dma_stat, stat;
- int found = 0;
-
- ctl = tx4939ide_check_error_ints(hwif);
- ide_int = ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST);
- switch (ide_int) {
- case TX4939IDE_INT_HOST:
- /* On error, XFEREND might not be asserted. */
- stat = tx4939ide_readb(base, TX4939IDE_AltStat_DevCtl);
- if ((stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) == ATA_ERR)
- found = 1;
- else
- /* Wait for XFEREND (Mask HOST and unmask XFEREND) */
- ctl &= ~TX4939IDE_INT_XFEREND << 8;
- ctl |= ide_int << 8;
- break;
- case TX4939IDE_INT_HOST | TX4939IDE_INT_XFEREND:
- dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat);
- if (!(dma_stat & ATA_DMA_INTR))
- pr_warn("%s: weird interrupt status. "
- "DMA_Stat %#02x int_ctl %#04x\n",
- hwif->name, dma_stat, ctl);
- found = 1;
- break;
- }
- /*
- * Do not clear XFEREND, HOST now. They will be cleared by
- * clearing bit2 of DMA_Stat.
- */
- ctl &= ~ide_int;
- tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl);
- return found;
-}
-
-#ifdef __BIG_ENDIAN
-static u8 tx4939ide_dma_sff_read_status(ide_hwif_t *hwif)
-{
- void __iomem *base = TX4939IDE_BASE(hwif);
-
- return tx4939ide_readb(base, TX4939IDE_DMA_Stat);
-}
-#else
-#define tx4939ide_dma_sff_read_status ide_dma_sff_read_status
-#endif
-
-static void tx4939ide_init_hwif(ide_hwif_t *hwif)
-{
- void __iomem *base = TX4939IDE_BASE(hwif);
-
- /* Soft Reset */
- tx4939ide_writew(0x8000, base, TX4939IDE_Sys_Ctl);
- /* at least 20 GBUSCLK (typ. 100ns @ GBUS200MHz, max 450ns) */
- ndelay(450);
- tx4939ide_writew(0x0000, base, TX4939IDE_Sys_Ctl);
- /* mask some interrupts and clear all interrupts */
- tx4939ide_writew((TX4939IDE_IGNORE_INTS << 8) | 0xff, base,
- TX4939IDE_Int_Ctl);
-
- tx4939ide_writew(0x0008, base, TX4939IDE_Lo_Burst_Cnt);
- tx4939ide_writew(0, base, TX4939IDE_Up_Burst_Cnt);
-}
-
-static int tx4939ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- hwif->dma_base =
- hwif->extra_base + tx4939ide_swizzleb(TX4939IDE_DMA_Cmd);
- /*
- * Note that we cannot use ATA_DMA_TABLE_OFS, ATA_DMA_STATUS
- * for big endian.
- */
- return ide_allocate_dma_engine(hwif);
-}
-
-static void tx4939ide_tf_load_fixup(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- void __iomem *base = TX4939IDE_BASE(hwif);
- u16 sysctl = hwif->select_data >> (drive->dn ? 16 : 0);
-
- /*
- * Fix ATA100 CORE System Control Register. (The write to the
- * Device/Head register may write wrong data to the System
- * Control Register)
- * While Sys_Ctl is written here, dev_select() is not needed.
- */
- tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl);
-}
-
-static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf,
- u8 valid)
-{
- ide_tf_load(drive, tf, valid);
-
- if (valid & IDE_VALID_DEVICE)
- tx4939ide_tf_load_fixup(drive);
-}
-
-#ifdef __BIG_ENDIAN
-
-/* custom iops (independent from SWAP_IO_SPACE) */
-static void tx4939ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long port = drive->hwif->io_ports.data_addr;
- unsigned short *ptr = buf;
- unsigned int count = (len + 1) / 2;
-
- while (count--)
- *ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
- __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
-}
-
-static void tx4939ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long port = drive->hwif->io_ports.data_addr;
- unsigned short *ptr = buf;
- unsigned int count = (len + 1) / 2;
-
- while (count--) {
- __raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
- ptr++;
- }
- __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
-}
-
-static const struct ide_tp_ops tx4939ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = tx4939ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = tx4939ide_input_data_swap,
- .output_data = tx4939ide_output_data_swap,
-};
-
-#else /* __LITTLE_ENDIAN */
-
-static const struct ide_tp_ops tx4939ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = tx4939ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-#endif /* __LITTLE_ENDIAN */
-
-static const struct ide_port_ops tx4939ide_port_ops = {
- .set_pio_mode = tx4939ide_set_pio_mode,
- .set_dma_mode = tx4939ide_set_dma_mode,
- .clear_irq = tx4939ide_clear_irq,
- .cable_detect = tx4939ide_cable_detect,
-};
-
-static const struct ide_dma_ops tx4939ide_dma_ops = {
- .dma_host_set = tx4939ide_dma_host_set,
- .dma_setup = tx4939ide_dma_setup,
- .dma_start = ide_dma_start,
- .dma_end = tx4939ide_dma_end,
- .dma_test_irq = tx4939ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_sff_read_status = tx4939ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info tx4939ide_port_info __initconst = {
- .init_hwif = tx4939ide_init_hwif,
- .init_dma = tx4939ide_init_dma,
- .port_ops = &tx4939ide_port_ops,
- .dma_ops = &tx4939ide_dma_ops,
- .tp_ops = &tx4939ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- .chipset = ide_generic,
-};
-
-static int __init tx4939ide_probe(struct platform_device *pdev)
-{
- struct ide_hw hw, *hws[] = { &hw };
- struct ide_host *host;
- struct resource *res;
- int irq, ret;
- unsigned long mapbase;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -ENODEV;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), MODNAME))
- return -EBUSY;
- mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!mapbase)
- return -EBUSY;
- memset(&hw, 0, sizeof(hw));
- hw.io_ports.data_addr =
- mapbase + tx4939ide_swizzlew(TX4939IDE_Data);
- hw.io_ports.error_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_Error_Feature);
- hw.io_ports.nsect_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_Sec);
- hw.io_ports.lbal_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_LBA0);
- hw.io_ports.lbam_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_LBA1);
- hw.io_ports.lbah_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_LBA2);
- hw.io_ports.device_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_DevHead);
- hw.io_ports.command_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_Stat_Cmd);
- hw.io_ports.ctl_addr =
- mapbase + tx4939ide_swizzleb(TX4939IDE_AltStat_DevCtl);
- hw.irq = irq;
- hw.dev = &pdev->dev;
-
- pr_info("TX4939 IDE interface (base %#lx, irq %d)\n", mapbase, irq);
- host = ide_host_alloc(&tx4939ide_port_info, hws, 1);
- if (!host)
- return -ENOMEM;
- /* use extra_base for base address of the all registers */
- host->ports[0]->extra_base = mapbase;
- ret = ide_host_register(host, &tx4939ide_port_info, hws);
- if (ret) {
- ide_host_free(host);
- return ret;
- }
- platform_set_drvdata(pdev, host);
- return 0;
-}
-
-static int __exit tx4939ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
-
- ide_host_remove(host);
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int tx4939ide_resume(struct platform_device *dev)
-{
- struct ide_host *host = platform_get_drvdata(dev);
- ide_hwif_t *hwif = host->ports[0];
-
- tx4939ide_init_hwif(hwif);
- return 0;
-}
-#else
-#define tx4939ide_resume NULL
-#endif
-
-static struct platform_driver tx4939ide_driver = {
- .driver = {
- .name = MODNAME,
- },
- .remove = __exit_p(tx4939ide_remove),
- .resume = tx4939ide_resume,
-};
-
-module_platform_driver_probe(tx4939ide_driver, tx4939ide_probe);
-
-MODULE_DESCRIPTION("TX4939 internal IDE driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:tx4939ide");
diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c
deleted file mode 100644
index cf996f788292..000000000000
--- a/drivers/ide/umc8672.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1995-1996 Linus Torvalds & author (see below)
- */
-
-/*
- * Principal Author/Maintainer: PODIEN@...2.atlas.de (Wolfram Podien)
- *
- * This file provides support for the advanced features
- * of the UMC 8672 IDE interface.
- *
- * Version 0.01 Initial version, hacked out of ide.c,
- * and #include'd rather than compiled separately.
- * This will get cleaned up in a subsequent release.
- *
- * Version 0.02 now configs/compiles separate from ide.c -ml
- * Version 0.03 enhanced auto-tune, fix display bug
- * Version 0.05 replace sti() with restore_flags() -ml
- * add detection of possible race condition -ml
- */
-
-/*
- * VLB Controller Support from
- * Wolfram Podien
- * Rohoefe 3
- * D28832 Achim
- * Germany
- *
- * To enable UMC8672 support there must a lilo line like
- * append="ide0=umc8672"...
- * To set the speed according to the abilities of the hardware there must be a
- * line like
- * #define UMC_DRIVE0 11
- * in the beginning of the driver, which sets the speed of drive 0 to 11 (there
- * are some lines present). 0 - 11 are allowed speed values. These values are
- * the results from the DOS speed test program supplied from UMC. 11 is the
- * highest speed (about PIO mode 3)
- */
-#define REALLY_SLOW_IO /* some systems can safely undef this */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "umc8672"
-
-/*
- * Default speeds. These can be changed with "auto-tune" and/or hdparm.
- */
-#define UMC_DRIVE0 1 /* DOS measured drive speeds */
-#define UMC_DRIVE1 1 /* 0 to 11 allowed */
-#define UMC_DRIVE2 1 /* 11 = Fastest Speed */
-#define UMC_DRIVE3 1 /* In case of crash reduce speed */
-
-static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3};
-static const u8 pio_to_umc [5] = {0, 3, 7, 10, 11}; /* rough guesses */
-
-/* 0 1 2 3 4 5 6 7 8 9 10 11 */
-static const u8 speedtab [3][12] = {
- {0x0f, 0x0b, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1},
- {0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1},
- {0xff, 0xcb, 0xc0, 0x58, 0x36, 0x33, 0x23, 0x22, 0x21, 0x11, 0x10, 0x0}
-};
-
-static void out_umc(char port, char wert)
-{
- outb_p(port, 0x108);
- outb_p(wert, 0x109);
-}
-
-static inline u8 in_umc(char port)
-{
- outb_p(port, 0x108);
- return inb_p(0x109);
-}
-
-static void umc_set_speeds(u8 speeds[])
-{
- int i, tmp;
-
- outb_p(0x5A, 0x108); /* enable umc */
-
- out_umc(0xd7, (speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
- out_umc(0xd6, (speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
- tmp = 0;
- for (i = 3; i >= 0; i--)
- tmp = (tmp << 2) | speedtab[1][speeds[i]];
- out_umc(0xdc, tmp);
- for (i = 0; i < 4; i++) {
- out_umc(0xd0 + i, speedtab[2][speeds[i]]);
- out_umc(0xd8 + i, speedtab[2][speeds[i]]);
- }
- outb_p(0xa5, 0x108); /* disable umc */
-
- printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
- speeds[0], speeds[1], speeds[2], speeds[3]);
-}
-
-static void umc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- ide_hwif_t *mate = hwif->mate;
- unsigned long flags;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
- drive->name, pio, pio_to_umc[pio]);
- if (mate)
- spin_lock_irqsave(&mate->lock, flags);
- if (mate && mate->handler) {
- printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n");
- } else {
- current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
- umc_set_speeds(current_speeds);
- }
- if (mate)
- spin_unlock_irqrestore(&mate->lock, flags);
-}
-
-static const struct ide_port_ops umc8672_port_ops = {
- .set_pio_mode = umc_set_pio_mode,
-};
-
-static const struct ide_port_info umc8672_port_info __initconst = {
- .name = DRV_NAME,
- .chipset = ide_umc8672,
- .port_ops = &umc8672_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
-};
-
-static int __init umc8672_probe(void)
-{
- unsigned long flags;
-
- if (!request_region(0x108, 2, "umc8672")) {
- printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n");
- return 1;
- }
- local_irq_save(flags);
- outb_p(0x5A, 0x108); /* enable umc */
- if (in_umc (0xd5) != 0xa0) {
- local_irq_restore(flags);
- printk(KERN_ERR "umc8672: not found\n");
- release_region(0x108, 2);
- return 1;
- }
- outb_p(0xa5, 0x108); /* disable umc */
-
- umc_set_speeds(current_speeds);
- local_irq_restore(flags);
-
- return ide_legacy_device_add(&umc8672_port_info, 0);
-}
-
-static bool probe_umc8672;
-
-module_param_named(probe, probe_umc8672, bool, 0);
-MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
-
-static int __init umc8672_init(void)
-{
- if (probe_umc8672 == 0)
- goto out;
-
- if (umc8672_probe() == 0)
- return 0;
-out:
- return -ENODEV;
-}
-
-module_init(umc8672_init);
-
-MODULE_AUTHOR("Wolfram Podien");
-MODULE_DESCRIPTION("Support for UMC 8672 IDE chipset");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
deleted file mode 100644
index 63a3aca506fc..000000000000
--- a/drivers/ide/via82cxxx.c
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * VIA IDE driver for Linux. Supported southbridges:
- *
- * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
- * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
- * vt8235, vt8237, vt8237a
- *
- * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
- *
- * Based on the work of:
- * Michel Aubry
- * Jeff Garzik
- * Andre Hedrick
- *
- * Documentation:
- * Obsolete device documentation publicly available from via.com.tw
- * Current device documentation available under NDA only
- */
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/dmi.h>
-
-#ifdef CONFIG_PPC_CHRP
-#include <asm/processor.h>
-#endif
-
-#define DRV_NAME "via82cxxx"
-
-#define VIA_IDE_ENABLE 0x40
-#define VIA_IDE_CONFIG 0x41
-#define VIA_FIFO_CONFIG 0x43
-#define VIA_MISC_1 0x44
-#define VIA_MISC_2 0x45
-#define VIA_MISC_3 0x46
-#define VIA_DRIVE_TIMING 0x48
-#define VIA_8BIT_TIMING 0x4e
-#define VIA_ADDRESS_SETUP 0x4c
-#define VIA_UDMA_TIMING 0x50
-
-#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */
-#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */
-#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */
-#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */
-#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */
-#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */
-#define VIA_SATA_PATA 0x80 /* SATA/PATA combined configuration */
-
-enum {
- VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */
-};
-
-/*
- * VIA SouthBridge chips.
- */
-
-static struct via_isa_bridge {
- char *name;
- u16 id;
- u8 rev_min;
- u8 rev_max;
- u8 udma_mask;
- u8 flags;
-} via_isa_bridges[] = {
- { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
- { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
- { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
- { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
- { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
- { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
- { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
- { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
- { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
- { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
- { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
- { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
- { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { NULL }
-};
-
-static unsigned int via_clock;
-static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
-
-struct via82cxxx_dev
-{
- struct via_isa_bridge *via_config;
- unsigned int via_80w;
-};
-
-/**
- * via_set_speed - write timing registers
- * @dev: PCI device
- * @dn: device
- * @timing: IDE timing data to use
- *
- * via_set_speed writes timing values to the chipset registers
- */
-
-static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- u8 t;
-
- if (~vdev->via_config->flags & VIA_BAD_AST) {
- pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
- pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
- }
-
- pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
- ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
-
- pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
- ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
- case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
- case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
- case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
- }
-
- /* Set UDMA unless device is not UDMA capable */
- if (vdev->via_config->udma_mask) {
- u8 udma_etc;
-
- pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc);
-
- /* clear transfer mode bit */
- udma_etc &= ~0x20;
-
- if (timing->udma) {
- /* preserve 80-wire cable detection bit */
- udma_etc &= 0x10;
- udma_etc |= t;
- }
-
- pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc);
- }
-}
-
-/**
- * via_set_drive - configure transfer mode
- * @hwif: port
- * @drive: Drive to set up
- *
- * via_set_drive() computes timing values configures the chipset to
- * a desired transfer mode. It also can be called by upper layers.
- */
-
-static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- ide_drive_t *peer = ide_get_pair_dev(drive);
- struct ide_host *host = dev_get_drvdata(hwif->dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- struct ide_timing t, p;
- unsigned int T, UT;
- const u8 speed = drive->dma_mode;
-
- T = 1000000000 / via_clock;
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA2: UT = T; break;
- case ATA_UDMA4: UT = T/2; break;
- case ATA_UDMA5: UT = T/3; break;
- case ATA_UDMA6: UT = T/4; break;
- default: UT = T;
- }
-
- ide_timing_compute(drive, speed, &t, T, UT);
-
- if (peer) {
- ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
- ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
- }
-
- via_set_speed(hwif, drive->dn, &t);
-}
-
-/**
- * via_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * A callback from the upper layers for PIO-only tuning.
- */
-
-static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- via_set_drive(hwif, drive);
-}
-
-static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
-{
- struct via_isa_bridge *via_config;
-
- for (via_config = via_isa_bridges;
- via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++)
- if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
- !!(via_config->flags & VIA_BAD_ID),
- via_config->id, NULL))) {
-
- if ((*isa)->revision >= via_config->rev_min &&
- (*isa)->revision <= via_config->rev_max)
- break;
- pci_dev_put(*isa);
- }
-
- return via_config;
-}
-
-/*
- * Check and handle 80-wire cable presence
- */
-static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
-{
- int i;
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA4:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> (i & 16)) & 8) &&
- ((u >> i) & 0x20) &&
- (((u >> i) & 7) < 2)) {
- /*
- * 2x PCI clock and
- * UDMA w/ < 3T/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA5:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 4))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA6:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 6))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
- }
-}
-
-/**
- * init_chipset_via82cxxx - initialization handler
- * @dev: PCI device
- *
- * The initialization callback. Here we determine the IDE chip type
- * and initialize its drive independent registers.
- */
-
-static int init_chipset_via82cxxx(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- struct via_isa_bridge *via_config = vdev->via_config;
- u8 t, v;
- u32 u;
-
- /*
- * Detect cable and configure Clk66
- */
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-
- via_cable_detect(vdev, u);
-
- if (via_config->udma_mask == ATA_UDMA4) {
- /* Enable Clk66 */
- pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
- } else if (via_config->flags & VIA_BAD_CLK66) {
- /* Would cause trouble on 596a and 686 */
- pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
- }
-
- /*
- * Check whether interfaces are enabled.
- */
-
- pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
-
- /*
- * Set up FIFO sizes and thresholds.
- */
-
- pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
-
- /* Disable PREQ# till DDACK# */
- if (via_config->flags & VIA_BAD_PREQ) {
- /* Would crash on 586b rev 41 */
- t &= 0x7f;
- }
-
- /* Fix FIFO split between channels */
- if (via_config->flags & VIA_SET_FIFO) {
- t &= (t & 0x9f);
- switch (v & 3) {
- case 2: t |= 0x00; break; /* 16 on primary */
- case 1: t |= 0x60; break; /* 16 on secondary */
- case 3: t |= 0x20; break; /* 8 pri 8 sec */
- }
- }
-
- pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
-
- return 0;
-}
-
-/*
- * Cable special cases
- */
-
-static const struct dmi_system_id cable_dmi_table[] = {
- {
- .ident = "Acer Ferrari 3400",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
- DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
- },
- },
- { }
-};
-
-static int via_cable_override(struct pci_dev *pdev)
-{
- /* Systems by DMI */
- if (dmi_check_system(cable_dmi_table))
- return 1;
-
- /* Arima W730-K8/Targa Visionary 811/... */
- if (pdev->subsystem_vendor == 0x161F &&
- pdev->subsystem_device == 0x2032)
- return 1;
-
- return 0;
-}
-
-static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(pdev);
- struct via82cxxx_dev *vdev = host->host_priv;
-
- if (via_cable_override(pdev))
- return ATA_CBL_PATA40_SHORT;
-
- if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0)
- return ATA_CBL_SATA;
-
- if ((vdev->via_80w >> hwif->channel) & 1)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops via_port_ops = {
- .set_pio_mode = via_set_pio_mode,
- .set_dma_mode = via_set_drive,
- .cable_detect = via82cxxx_cable_detect,
-};
-
-static const struct ide_port_info via82cxxx_chipset = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_via82cxxx,
- .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
- .port_ops = &via_port_ops,
- .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_IO_32BIT,
- .pio_mask = ATA_PIO5,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct pci_dev *isa = NULL;
- struct via_isa_bridge *via_config;
- struct via82cxxx_dev *vdev;
- int rc;
- u8 idx = id->driver_data;
- struct ide_port_info d;
-
- d = via82cxxx_chipset;
-
- /*
- * Find the ISA bridge and check we know what it is.
- */
- via_config = via_config_find(&isa);
-
- /*
- * Print the boot message.
- */
- printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
- pci_name(dev), via_config->name, isa->revision,
- via_config->udma_mask ? "U" : "MW",
- via_dma[via_config->udma_mask ?
- (fls(via_config->udma_mask) - 1) : 0]);
-
- pci_dev_put(isa);
-
- /*
- * Determine system bus clock.
- */
- via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
- switch (via_clock) {
- case 33000: via_clock = 33333; break;
- case 37000: via_clock = 37500; break;
- case 41000: via_clock = 41666; break;
- }
-
- if (via_clock < 20000 || via_clock > 50000) {
- printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
- "impossible (%d), using 33 MHz instead.\n", via_clock);
- via_clock = 33333;
- }
-
- if (idx == 1)
- d.enablebits[1].reg = d.enablebits[0].reg = 0;
- else
- d.host_flags |= IDE_HFLAG_NO_AUTODMA;
-
- if (idx == VIA_IDFLAG_SINGLE)
- d.host_flags |= IDE_HFLAG_SINGLE;
-
- if ((via_config->flags & VIA_NO_UNMASK) == 0)
- d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
-
- d.udma_mask = via_config->udma_mask;
-
- vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
- if (!vdev) {
- printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
- pci_name(dev));
- return -ENOMEM;
- }
-
- vdev->via_config = via_config;
-
- rc = ide_pci_init_one(dev, &d, vdev);
- if (rc)
- kfree(vdev);
-
- return rc;
-}
-
-static void via_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
-
- ide_pci_remove(dev);
- kfree(vdev);
-}
-
-static const struct pci_device_id via_pci_tbl[] = {
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415), 1 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, via_pci_tbl);
-
-static struct pci_driver via_pci_driver = {
- .name = "VIA_IDE",
- .id_table = via_pci_tbl,
- .probe = via_init_one,
- .remove = via_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init via_ide_init(void)
-{
- return ide_pci_register_driver(&via_pci_driver);
-}
-
-static void __exit via_ide_exit(void)
-{
- pci_unregister_driver(&via_pci_driver);
-}
-
-module_init(via_ide_init);
-module_exit(via_ide_exit);
-
-MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for VIA IDE");
-MODULE_LICENSE("GPL");
diff --git a/include/linux/ide.h b/include/linux/ide.h
deleted file mode 100644
index 2c300689a51a..000000000000
--- a/include/linux/ide.h
+++ /dev/null
@@ -1,1623 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IDE_H
-#define _IDE_H
-/*
- * linux/include/linux/ide.h
- *
- * Copyright (C) 1994-2002 Linus Torvalds & authors
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/ata.h>
-#include <linux/blk-mq.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/bio.h>
-#include <linux/pci.h>
-#include <linux/completion.h>
-#include <linux/pm.h>
-#include <linux/mutex.h>
-/* for request_sense */
-#include <linux/cdrom.h>
-#include <scsi/scsi_cmnd.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-
-/*
- * Probably not wise to fiddle with these
- */
-#define SUPPORT_VLB_SYNC 1
-#define IDE_DEFAULT_MAX_FAILURES 1
-#define ERROR_MAX 8 /* Max read/write errors per sector */
-#define ERROR_RESET 3 /* Reset controller every 4th retry */
-#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
-
-struct device;
-
-/* values for ide_request.type */
-enum ata_priv_type {
- ATA_PRIV_MISC,
- ATA_PRIV_TASKFILE,
- ATA_PRIV_PC,
- ATA_PRIV_SENSE, /* sense request */
- ATA_PRIV_PM_SUSPEND, /* suspend request */
- ATA_PRIV_PM_RESUME, /* resume request */
-};
-
-struct ide_request {
- struct scsi_request sreq;
- u8 sense[SCSI_SENSE_BUFFERSIZE];
- u8 type;
- void *special;
-};
-
-static inline struct ide_request *ide_req(struct request *rq)
-{
- return blk_mq_rq_to_pdu(rq);
-}
-
-static inline bool ata_misc_request(struct request *rq)
-{
- return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_MISC;
-}
-
-static inline bool ata_taskfile_request(struct request *rq)
-{
- return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_TASKFILE;
-}
-
-static inline bool ata_pc_request(struct request *rq)
-{
- return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_PC;
-}
-
-static inline bool ata_sense_request(struct request *rq)
-{
- return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_SENSE;
-}
-
-static inline bool ata_pm_request(struct request *rq)
-{
- return blk_rq_is_private(rq) &&
- (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND ||
- ide_req(rq)->type == ATA_PRIV_PM_RESUME);
-}
-
-/* Error codes returned in result to the higher part of the driver. */
-enum {
- IDE_DRV_ERROR_GENERAL = 101,
- IDE_DRV_ERROR_FILEMARK = 102,
- IDE_DRV_ERROR_EOD = 103,
-};
-
-/*
- * Definitions for accessing IDE controller registers
- */
-#define IDE_NR_PORTS (10)
-
-struct ide_io_ports {
- unsigned long data_addr;
-
- union {
- unsigned long error_addr; /* read: error */
- unsigned long feature_addr; /* write: feature */
- };
-
- unsigned long nsect_addr;
- unsigned long lbal_addr;
- unsigned long lbam_addr;
- unsigned long lbah_addr;
-
- unsigned long device_addr;
-
- union {
- unsigned long status_addr; /* read: status */
- unsigned long command_addr; /* write: command */
- };
-
- unsigned long ctl_addr;
-
- unsigned long irq_addr;
-};
-
-#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
-
-#define BAD_R_STAT (ATA_BUSY | ATA_ERR)
-#define BAD_W_STAT (BAD_R_STAT | ATA_DF)
-#define BAD_STAT (BAD_R_STAT | ATA_DRQ)
-#define DRIVE_READY (ATA_DRDY | ATA_DSC)
-
-#define BAD_CRC (ATA_ABORTED | ATA_ICRC)
-
-#define SATA_NR_PORTS (3) /* 16 possible ?? */
-
-#define SATA_STATUS_OFFSET (0)
-#define SATA_ERROR_OFFSET (1)
-#define SATA_CONTROL_OFFSET (2)
-
-/*
- * Our Physical Region Descriptor (PRD) table should be large enough
- * to handle the biggest I/O request we are likely to see. Since requests
- * can have no more than 256 sectors, and since the typical blocksize is
- * two or more sectors, we could get by with a limit of 128 entries here for
- * the usual worst case. Most requests seem to include some contiguous blocks,
- * further reducing the number of table entries required.
- *
- * The driver reverts to PIO mode for individual requests that exceed
- * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
- * 100% of all crazy scenarios here is not necessary.
- *
- * As it turns out though, we must allocate a full 4KB page for this,
- * so the two PRD tables (ide0 & ide1) will each get half of that,
- * allowing each to have about 256 entries (8 bytes each) from this.
- */
-#define PRD_BYTES 8
-#define PRD_ENTRIES 256
-
-/*
- * Some more useful definitions
- */
-#define PARTN_BITS 6 /* number of minor dev bits for partitions */
-#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
-
-/*
- * Timeouts for various operations:
- */
-enum {
- /* spec allows up to 20ms, but CF cards and SSD drives need more */
- WAIT_DRQ = 1 * HZ, /* 1s */
- /* some laptops are very slow */
- WAIT_READY = 5 * HZ, /* 5s */
- /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
- WAIT_PIDENTIFY = 10 * HZ, /* 10s */
- /* worst case when spinning up */
- WAIT_WORSTCASE = 30 * HZ, /* 30s */
- /* maximum wait for an IRQ to happen */
- WAIT_CMD = 10 * HZ, /* 10s */
- /* Some drives require a longer IRQ timeout. */
- WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */
- /*
- * Some drives (for example, Seagate STT3401A Travan) require a very
- * long timeout, because they don't return an interrupt or clear their
- * BSY bit until after the command completes (even retension commands).
- */
- WAIT_TAPE_CMD = 900 * HZ, /* 900s */
- /* minimum sleep time */
- WAIT_MIN_SLEEP = HZ / 50, /* 20ms */
-};
-
-/*
- * Op codes for special requests to be handled by ide_special_rq().
- * Values should be in the range of 0x20 to 0x3f.
- */
-#define REQ_DRIVE_RESET 0x20
-#define REQ_DEVSET_EXEC 0x21
-#define REQ_PARK_HEADS 0x22
-#define REQ_UNPARK_HEADS 0x23
-
-/*
- * hwif_chipset_t is used to keep track of the specific hardware
- * chipset used by each IDE interface, if known.
- */
-enum { ide_unknown, ide_generic, ide_pci,
- ide_cmd640, ide_dtc2278, ide_ali14xx,
- ide_qd65xx, ide_umc8672, ide_ht6560b,
- ide_4drives, ide_pmac, ide_acorn,
- ide_au1xxx, ide_palm3710
-};
-
-typedef u8 hwif_chipset_t;
-
-/*
- * Structure to hold all information about the location of this port
- */
-struct ide_hw {
- union {
- struct ide_io_ports io_ports;
- unsigned long io_ports_array[IDE_NR_PORTS];
- };
-
- int irq; /* our irq number */
- struct device *dev, *parent;
- unsigned long config;
-};
-
-static inline void ide_std_init_ports(struct ide_hw *hw,
- unsigned long io_addr,
- unsigned long ctl_addr)
-{
- unsigned int i;
-
- for (i = 0; i <= 7; i++)
- hw->io_ports_array[i] = io_addr++;
-
- hw->io_ports.ctl_addr = ctl_addr;
-}
-
-#define MAX_HWIFS 10
-
-/*
- * Now for the data we need to maintain per-drive: ide_drive_t
- */
-
-#define ide_scsi 0x21
-#define ide_disk 0x20
-#define ide_optical 0x7
-#define ide_cdrom 0x5
-#define ide_tape 0x1
-#define ide_floppy 0x0
-
-/*
- * Special Driver Flags
- */
-enum {
- IDE_SFLAG_SET_GEOMETRY = BIT(0),
- IDE_SFLAG_RECALIBRATE = BIT(1),
- IDE_SFLAG_SET_MULTMODE = BIT(2),
-};
-
-/*
- * Status returned from various ide_ functions
- */
-typedef enum {
- ide_stopped, /* no drive operation was started */
- ide_started, /* a drive operation was started, handler was set */
-} ide_startstop_t;
-
-enum {
- IDE_VALID_ERROR = BIT(1),
- IDE_VALID_FEATURE = IDE_VALID_ERROR,
- IDE_VALID_NSECT = BIT(2),
- IDE_VALID_LBAL = BIT(3),
- IDE_VALID_LBAM = BIT(4),
- IDE_VALID_LBAH = BIT(5),
- IDE_VALID_DEVICE = BIT(6),
- IDE_VALID_LBA = IDE_VALID_LBAL |
- IDE_VALID_LBAM |
- IDE_VALID_LBAH,
- IDE_VALID_OUT_TF = IDE_VALID_FEATURE |
- IDE_VALID_NSECT |
- IDE_VALID_LBA,
- IDE_VALID_IN_TF = IDE_VALID_NSECT |
- IDE_VALID_LBA,
- IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF,
- IDE_VALID_IN_HOB = IDE_VALID_ERROR |
- IDE_VALID_NSECT |
- IDE_VALID_LBA,
-};
-
-enum {
- IDE_TFLAG_LBA48 = BIT(0),
- IDE_TFLAG_WRITE = BIT(1),
- IDE_TFLAG_CUSTOM_HANDLER = BIT(2),
- IDE_TFLAG_DMA_PIO_FALLBACK = BIT(3),
- /* force 16-bit I/O operations */
- IDE_TFLAG_IO_16BIT = BIT(4),
- /* struct ide_cmd was allocated using kmalloc() */
- IDE_TFLAG_DYN = BIT(5),
- IDE_TFLAG_FS = BIT(6),
- IDE_TFLAG_MULTI_PIO = BIT(7),
- IDE_TFLAG_SET_XFER = BIT(8),
-};
-
-enum {
- IDE_FTFLAG_FLAGGED = BIT(0),
- IDE_FTFLAG_SET_IN_FLAGS = BIT(1),
- IDE_FTFLAG_OUT_DATA = BIT(2),
- IDE_FTFLAG_IN_DATA = BIT(3),
-};
-
-struct ide_taskfile {
- u8 data; /* 0: data byte (for TASKFILE ioctl) */
- union { /* 1: */
- u8 error; /* read: error */
- u8 feature; /* write: feature */
- };
- u8 nsect; /* 2: number of sectors */
- u8 lbal; /* 3: LBA low */
- u8 lbam; /* 4: LBA mid */
- u8 lbah; /* 5: LBA high */
- u8 device; /* 6: device select */
- union { /* 7: */
- u8 status; /* read: status */
- u8 command; /* write: command */
- };
-};
-
-struct ide_cmd {
- struct ide_taskfile tf;
- struct ide_taskfile hob;
- struct {
- struct {
- u8 tf;
- u8 hob;
- } out, in;
- } valid;
-
- u16 tf_flags;
- u8 ftf_flags; /* for TASKFILE ioctl */
- int protocol;
-
- int sg_nents; /* number of sg entries */
- int orig_sg_nents;
- int sg_dma_direction; /* DMA transfer direction */
-
- unsigned int nbytes;
- unsigned int nleft;
- unsigned int last_xfer_len;
-
- struct scatterlist *cursg;
- unsigned int cursg_ofs;
-
- struct request *rq; /* copy of request */
-};
-
-/* ATAPI packet command flags */
-enum {
- /* set when an error is considered normal - no retry (ide-tape) */
- PC_FLAG_ABORT = BIT(0),
- PC_FLAG_SUPPRESS_ERROR = BIT(1),
- PC_FLAG_WAIT_FOR_DSC = BIT(2),
- PC_FLAG_DMA_OK = BIT(3),
- PC_FLAG_DMA_IN_PROGRESS = BIT(4),
- PC_FLAG_DMA_ERROR = BIT(5),
- PC_FLAG_WRITING = BIT(6),
-};
-
-#define ATAPI_WAIT_PC (60 * HZ)
-
-struct ide_atapi_pc {
- /* actual packet bytes */
- u8 c[12];
- /* incremented on each retry */
- int retries;
- int error;
-
- /* bytes to transfer */
- int req_xfer;
-
- /* the corresponding request */
- struct request *rq;
-
- unsigned long flags;
-
- /*
- * those are more or less driver-specific and some of them are subject
- * to change/removal later.
- */
- unsigned long timeout;
-};
-
-struct ide_devset;
-struct ide_driver;
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-struct ide_acpi_drive_link;
-struct ide_acpi_hwif_link;
-#endif
-
-struct ide_drive_s;
-
-struct ide_disk_ops {
- int (*check)(struct ide_drive_s *, const char *);
- int (*get_capacity)(struct ide_drive_s *);
- void (*unlock_native_capacity)(struct ide_drive_s *);
- void (*setup)(struct ide_drive_s *);
- void (*flush)(struct ide_drive_s *);
- int (*init_media)(struct ide_drive_s *, struct gendisk *);
- int (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
- int);
- ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
- sector_t);
- int (*ioctl)(struct ide_drive_s *, struct block_device *,
- fmode_t, unsigned int, unsigned long);
- int (*compat_ioctl)(struct ide_drive_s *, struct block_device *,
- fmode_t, unsigned int, unsigned long);
-};
-
-/* ATAPI device flags */
-enum {
- IDE_AFLAG_DRQ_INTERRUPT = BIT(0),
-
- /* ide-cd */
- /* Drive cannot eject the disc. */
- IDE_AFLAG_NO_EJECT = BIT(1),
- /* Drive is a pre ATAPI 1.2 drive. */
- IDE_AFLAG_PRE_ATAPI12 = BIT(2),
- /* TOC addresses are in BCD. */
- IDE_AFLAG_TOCADDR_AS_BCD = BIT(3),
- /* TOC track numbers are in BCD. */
- IDE_AFLAG_TOCTRACKS_AS_BCD = BIT(4),
- /* Saved TOC information is current. */
- IDE_AFLAG_TOC_VALID = BIT(6),
- /* We think that the drive door is locked. */
- IDE_AFLAG_DOOR_LOCKED = BIT(7),
- /* SET_CD_SPEED command is unsupported. */
- IDE_AFLAG_NO_SPEED_SELECT = BIT(8),
- IDE_AFLAG_VERTOS_300_SSD = BIT(9),
- IDE_AFLAG_VERTOS_600_ESD = BIT(10),
- IDE_AFLAG_SANYO_3CD = BIT(11),
- IDE_AFLAG_FULL_CAPS_PAGE = BIT(12),
- IDE_AFLAG_PLAY_AUDIO_OK = BIT(13),
- IDE_AFLAG_LE_SPEED_FIELDS = BIT(14),
-
- /* ide-floppy */
- /* Avoid commands not supported in Clik drive */
- IDE_AFLAG_CLIK_DRIVE = BIT(15),
- /* Requires BH algorithm for packets */
- IDE_AFLAG_ZIP_DRIVE = BIT(16),
- /* Supports format progress report */
- IDE_AFLAG_SRFP = BIT(17),
-
- /* ide-tape */
- IDE_AFLAG_IGNORE_DSC = BIT(18),
- /* 0 When the tape position is unknown */
- IDE_AFLAG_ADDRESS_VALID = BIT(19),
- /* Device already opened */
- IDE_AFLAG_BUSY = BIT(20),
- /* Attempt to auto-detect the current user block size */
- IDE_AFLAG_DETECT_BS = BIT(21),
- /* Currently on a filemark */
- IDE_AFLAG_FILEMARK = BIT(22),
- /* 0 = no tape is loaded, so we don't rewind after ejecting */
- IDE_AFLAG_MEDIUM_PRESENT = BIT(23),
-
- IDE_AFLAG_NO_AUTOCLOSE = BIT(24),
-};
-
-/* device flags */
-enum {
- /* restore settings after device reset */
- IDE_DFLAG_KEEP_SETTINGS = BIT(0),
- /* device is using DMA for read/write */
- IDE_DFLAG_USING_DMA = BIT(1),
- /* okay to unmask other IRQs */
- IDE_DFLAG_UNMASK = BIT(2),
- /* don't attempt flushes */
- IDE_DFLAG_NOFLUSH = BIT(3),
- /* DSC overlap */
- IDE_DFLAG_DSC_OVERLAP = BIT(4),
- /* give potential excess bandwidth */
- IDE_DFLAG_NICE1 = BIT(5),
- /* device is physically present */
- IDE_DFLAG_PRESENT = BIT(6),
- /* disable Host Protected Area */
- IDE_DFLAG_NOHPA = BIT(7),
- /* id read from device (synthetic if not set) */
- IDE_DFLAG_ID_READ = BIT(8),
- IDE_DFLAG_NOPROBE = BIT(9),
- /* need to do check_media_change() */
- IDE_DFLAG_REMOVABLE = BIT(10),
- IDE_DFLAG_FORCED_GEOM = BIT(12),
- /* disallow setting unmask bit */
- IDE_DFLAG_NO_UNMASK = BIT(13),
- /* disallow enabling 32-bit I/O */
- IDE_DFLAG_NO_IO_32BIT = BIT(14),
- /* for removable only: door lock/unlock works */
- IDE_DFLAG_DOORLOCKING = BIT(15),
- /* disallow DMA */
- IDE_DFLAG_NODMA = BIT(16),
- /* powermanagement told us not to do anything, so sleep nicely */
- IDE_DFLAG_BLOCKED = BIT(17),
- /* sleeping & sleep field valid */
- IDE_DFLAG_SLEEPING = BIT(18),
- IDE_DFLAG_POST_RESET = BIT(19),
- IDE_DFLAG_UDMA33_WARNED = BIT(20),
- IDE_DFLAG_LBA48 = BIT(21),
- /* status of write cache */
- IDE_DFLAG_WCACHE = BIT(22),
- /* used for ignoring ATA_DF */
- IDE_DFLAG_NOWERR = BIT(23),
- /* retrying in PIO */
- IDE_DFLAG_DMA_PIO_RETRY = BIT(24),
- IDE_DFLAG_LBA = BIT(25),
- /* don't unload heads */
- IDE_DFLAG_NO_UNLOAD = BIT(26),
- /* heads unloaded, please don't reset port */
- IDE_DFLAG_PARKED = BIT(27),
- IDE_DFLAG_MEDIA_CHANGED = BIT(28),
- /* write protect */
- IDE_DFLAG_WP = BIT(29),
- IDE_DFLAG_FORMAT_IN_PROGRESS = BIT(30),
- IDE_DFLAG_NIEN_QUIRK = BIT(31),
-};
-
-struct ide_drive_s {
- char name[4]; /* drive name, such as "hda" */
- char driver_req[10]; /* requests specific driver */
-
- struct request_queue *queue; /* request queue */
-
- bool (*prep_rq)(struct ide_drive_s *, struct request *);
-
- struct blk_mq_tag_set tag_set;
-
- struct request *rq; /* current request */
- void *driver_data; /* extra driver data */
- u16 *id; /* identification info */
-#ifdef CONFIG_IDE_PROC_FS
- struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
- const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
-#endif
- struct hwif_s *hwif; /* actually (ide_hwif_t *) */
-
- const struct ide_disk_ops *disk_ops;
-
- unsigned long dev_flags;
-
- unsigned long sleep; /* sleep until this time */
- unsigned long timeout; /* max time to wait for irq */
-
- u8 special_flags; /* special action flags */
-
- u8 select; /* basic drive/head select reg value */
- u8 retry_pio; /* retrying dma capable host in pio */
- u8 waiting_for_dma; /* dma currently in progress */
- u8 dma; /* atapi dma flag */
-
- u8 init_speed; /* transfer rate set at boot */
- u8 current_speed; /* current transfer rate set */
- u8 desired_speed; /* desired transfer rate set */
- u8 pio_mode; /* for ->set_pio_mode _only_ */
- u8 dma_mode; /* for ->set_dma_mode _only_ */
- u8 dn; /* now wide spread use */
- u8 acoustic; /* acoustic management */
- u8 media; /* disk, cdrom, tape, floppy, ... */
- u8 ready_stat; /* min status value for drive ready */
- u8 mult_count; /* current multiple sector setting */
- u8 mult_req; /* requested multiple sector setting */
- u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
- u8 bad_wstat; /* used for ignoring ATA_DF */
- u8 head; /* "real" number of heads */
- u8 sect; /* "real" sectors per track */
- u8 bios_head; /* BIOS/fdisk/LILO number of heads */
- u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
-
- /* delay this long before sending packet command */
- u8 pc_delay;
-
- unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
- unsigned int cyl; /* "real" number of cyls */
- void *drive_data; /* used by set_pio_mode/dev_select() */
- unsigned int failures; /* current failure count */
- unsigned int max_failures; /* maximum allowed failure count */
- u64 probed_capacity;/* initial/native media capacity */
- u64 capacity64; /* total number of sectors */
-
- int lun; /* logical unit */
- int crc_count; /* crc counter to reduce drive speed */
-
- unsigned long debug_mask; /* debugging levels switch */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
- struct ide_acpi_drive_link *acpidata;
-#endif
- struct list_head list;
- struct device gendev;
- struct completion gendev_rel_comp; /* to deal with device release() */
-
- /* current packet command */
- struct ide_atapi_pc *pc;
-
- /* last failed packet command */
- struct ide_atapi_pc *failed_pc;
-
- /* callback for packet commands */
- int (*pc_callback)(struct ide_drive_s *, int);
-
- ide_startstop_t (*irq_handler)(struct ide_drive_s *);
-
- unsigned long atapi_flags;
-
- struct ide_atapi_pc request_sense_pc;
-
- /* current sense rq and buffer */
- bool sense_rq_armed;
- bool sense_rq_active;
- struct request *sense_rq;
- struct request_sense sense_data;
-
- /* async sense insertion */
- struct work_struct rq_work;
- struct list_head rq_list;
-};
-
-typedef struct ide_drive_s ide_drive_t;
-
-#define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
-
-#define to_ide_drv(obj, cont_type) \
- container_of(obj, struct cont_type, dev)
-
-#define ide_drv_g(disk, cont_type) \
- container_of((disk)->private_data, struct cont_type, driver)
-
-struct ide_port_info;
-
-struct ide_tp_ops {
- void (*exec_command)(struct hwif_s *, u8);
- u8 (*read_status)(struct hwif_s *);
- u8 (*read_altstatus)(struct hwif_s *);
- void (*write_devctl)(struct hwif_s *, u8);
-
- void (*dev_select)(ide_drive_t *);
- void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
- void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
-
- void (*input_data)(ide_drive_t *, struct ide_cmd *,
- void *, unsigned int);
- void (*output_data)(ide_drive_t *, struct ide_cmd *,
- void *, unsigned int);
-};
-
-extern const struct ide_tp_ops default_tp_ops;
-
-/**
- * struct ide_port_ops - IDE port operations
- *
- * @init_dev: host specific initialization of a device
- * @set_pio_mode: routine to program host for PIO mode
- * @set_dma_mode: routine to program host for DMA mode
- * @reset_poll: chipset polling based on hba specifics
- * @pre_reset: chipset specific changes to default for device-hba resets
- * @resetproc: routine to reset controller after a disk reset
- * @maskproc: special host masking for drive selection
- * @quirkproc: check host's drive quirk list
- * @clear_irq: clear IRQ
- *
- * @mdma_filter: filter MDMA modes
- * @udma_filter: filter UDMA modes
- *
- * @cable_detect: detect cable type
- */
-struct ide_port_ops {
- void (*init_dev)(ide_drive_t *);
- void (*set_pio_mode)(struct hwif_s *, ide_drive_t *);
- void (*set_dma_mode)(struct hwif_s *, ide_drive_t *);
- blk_status_t (*reset_poll)(ide_drive_t *);
- void (*pre_reset)(ide_drive_t *);
- void (*resetproc)(ide_drive_t *);
- void (*maskproc)(ide_drive_t *, int);
- void (*quirkproc)(ide_drive_t *);
- void (*clear_irq)(ide_drive_t *);
- int (*test_irq)(struct hwif_s *);
-
- u8 (*mdma_filter)(ide_drive_t *);
- u8 (*udma_filter)(ide_drive_t *);
-
- u8 (*cable_detect)(struct hwif_s *);
-};
-
-struct ide_dma_ops {
- void (*dma_host_set)(struct ide_drive_s *, int);
- int (*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
- void (*dma_start)(struct ide_drive_s *);
- int (*dma_end)(struct ide_drive_s *);
- int (*dma_test_irq)(struct ide_drive_s *);
- void (*dma_lost_irq)(struct ide_drive_s *);
- /* below ones are optional */
- int (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
- int (*dma_timer_expiry)(struct ide_drive_s *);
- void (*dma_clear)(struct ide_drive_s *);
- /*
- * The following method is optional and only required to be
- * implemented for the SFF-8038i compatible controllers.
- */
- u8 (*dma_sff_read_status)(struct hwif_s *);
-};
-
-enum {
- IDE_PFLAG_PROBING = BIT(0),
-};
-
-struct ide_host;
-
-typedef struct hwif_s {
- struct hwif_s *mate; /* other hwif from same PCI chip */
- struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
-
- struct ide_host *host;
-
- char name[6]; /* name of interface, eg. "ide0" */
-
- struct ide_io_ports io_ports;
-
- unsigned long sata_scr[SATA_NR_PORTS];
-
- ide_drive_t *devices[MAX_DRIVES + 1];
-
- unsigned long port_flags;
-
- u8 major; /* our major number */
- u8 index; /* 0 for ide0; 1 for ide1; ... */
- u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
-
- u32 host_flags;
-
- u8 pio_mask;
-
- u8 ultra_mask;
- u8 mwdma_mask;
- u8 swdma_mask;
-
- u8 cbl; /* cable type */
-
- hwif_chipset_t chipset; /* sub-module for tuning.. */
-
- struct device *dev;
-
- void (*rw_disk)(ide_drive_t *, struct request *);
-
- const struct ide_tp_ops *tp_ops;
- const struct ide_port_ops *port_ops;
- const struct ide_dma_ops *dma_ops;
-
- /* dma physical region descriptor table (cpu view) */
- unsigned int *dmatable_cpu;
- /* dma physical region descriptor table (dma view) */
- dma_addr_t dmatable_dma;
-
- /* maximum number of PRD table entries */
- int prd_max_nents;
- /* PRD entry size in bytes */
- int prd_ent_size;
-
- /* Scatter-gather list used to build the above */
- struct scatterlist *sg_table;
- int sg_max_nents; /* Maximum number of entries in it */
-
- struct ide_cmd cmd; /* current command */
-
- int rqsize; /* max sectors per request */
- int irq; /* our irq number */
-
- unsigned long dma_base; /* base addr for dma ports */
-
- unsigned long config_data; /* for use by chipset-specific code */
- unsigned long select_data; /* for use by chipset-specific code */
-
- unsigned long extra_base; /* extra addr for dma ports */
- unsigned extra_ports; /* number of extra dma ports */
-
- unsigned present : 1; /* this interface exists */
- unsigned busy : 1; /* serializes devices on a port */
-
- struct device gendev;
- struct device *portdev;
-
- struct completion gendev_rel_comp; /* To deal with device release() */
-
- void *hwif_data; /* extra hwif data */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
- struct ide_acpi_hwif_link *acpidata;
-#endif
-
- /* IRQ handler, if active */
- ide_startstop_t (*handler)(ide_drive_t *);
-
- /* BOOL: polling active & poll_timeout field valid */
- unsigned int polling : 1;
-
- /* current drive */
- ide_drive_t *cur_dev;
-
- /* current request */
- struct request *rq;
-
- /* failsafe timer */
- struct timer_list timer;
- /* timeout value during long polls */
- unsigned long poll_timeout;
- /* queried upon timeouts */
- int (*expiry)(ide_drive_t *);
-
- int req_gen;
- int req_gen_timer;
-
- spinlock_t lock;
-} ____cacheline_internodealigned_in_smp ide_hwif_t;
-
-#define MAX_HOST_PORTS 4
-
-struct ide_host {
- ide_hwif_t *ports[MAX_HOST_PORTS + 1];
- unsigned int n_ports;
- struct device *dev[2];
-
- int (*init_chipset)(struct pci_dev *);
-
- void (*get_lock)(irq_handler_t, void *);
- void (*release_lock)(void);
-
- irq_handler_t irq_handler;
-
- unsigned long host_flags;
-
- int irq_flags;
-
- void *host_priv;
- ide_hwif_t *cur_port; /* for hosts requiring serialization */
-
- /* used for hosts requiring serialization */
- volatile unsigned long host_busy;
-};
-
-#define IDE_HOST_BUSY 0
-
-/*
- * internal ide interrupt handler type
- */
-typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
-typedef int (ide_expiry_t)(ide_drive_t *);
-
-/* used by ide-cd, ide-floppy, etc. */
-typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
-
-extern struct mutex ide_setting_mtx;
-
-/*
- * configurable drive settings
- */
-
-#define DS_SYNC BIT(0)
-
-struct ide_devset {
- int (*get)(ide_drive_t *);
- int (*set)(ide_drive_t *, int);
- unsigned int flags;
-};
-
-#define __DEVSET(_flags, _get, _set) { \
- .flags = _flags, \
- .get = _get, \
- .set = _set, \
-}
-
-#define ide_devset_get(name, field) \
-static int get_##name(ide_drive_t *drive) \
-{ \
- return drive->field; \
-}
-
-#define ide_devset_set(name, field) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
- drive->field = arg; \
- return 0; \
-}
-
-#define ide_devset_get_flag(name, flag) \
-static int get_##name(ide_drive_t *drive) \
-{ \
- return !!(drive->dev_flags & flag); \
-}
-
-#define ide_devset_set_flag(name, flag) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
- if (arg) \
- drive->dev_flags |= flag; \
- else \
- drive->dev_flags &= ~flag; \
- return 0; \
-}
-
-#define __IDE_DEVSET(_name, _flags, _get, _set) \
-const struct ide_devset ide_devset_##_name = \
- __DEVSET(_flags, _get, _set)
-
-#define IDE_DEVSET(_name, _flags, _get, _set) \
-static __IDE_DEVSET(_name, _flags, _get, _set)
-
-#define ide_devset_rw(_name, _func) \
-IDE_DEVSET(_name, 0, get_##_func, set_##_func)
-
-#define ide_devset_w(_name, _func) \
-IDE_DEVSET(_name, 0, NULL, set_##_func)
-
-#define ide_ext_devset_rw(_name, _func) \
-__IDE_DEVSET(_name, 0, get_##_func, set_##_func)
-
-#define ide_ext_devset_rw_sync(_name, _func) \
-__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
-
-#define ide_decl_devset(_name) \
-extern const struct ide_devset ide_devset_##_name
-
-ide_decl_devset(io_32bit);
-ide_decl_devset(keepsettings);
-ide_decl_devset(pio_mode);
-ide_decl_devset(unmaskirq);
-ide_decl_devset(using_dma);
-
-#ifdef CONFIG_IDE_PROC_FS
-/*
- * /proc/ide interface
- */
-
-#define ide_devset_rw_field(_name, _field) \
-ide_devset_get(_name, _field); \
-ide_devset_set(_name, _field); \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-
-#define ide_devset_ro_field(_name, _field) \
-ide_devset_get(_name, _field); \
-IDE_DEVSET(_name, 0, get_##_name, NULL)
-
-#define ide_devset_rw_flag(_name, _field) \
-ide_devset_get_flag(_name, _field); \
-ide_devset_set_flag(_name, _field); \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-
-struct ide_proc_devset {
- const char *name;
- const struct ide_devset *setting;
- int min, max;
- int (*mulf)(ide_drive_t *);
- int (*divf)(ide_drive_t *);
-};
-
-#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
- .name = __stringify(_name), \
- .setting = &ide_devset_##_name, \
- .min = _min, \
- .max = _max, \
- .mulf = _mulf, \
- .divf = _divf, \
-}
-
-#define IDE_PROC_DEVSET(_name, _min, _max) \
-__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
-
-typedef struct {
- const char *name;
- umode_t mode;
- int (*show)(struct seq_file *, void *);
-} ide_proc_entry_t;
-
-void proc_ide_create(void);
-void proc_ide_destroy(void);
-void ide_proc_register_port(ide_hwif_t *);
-void ide_proc_port_register_devices(ide_hwif_t *);
-void ide_proc_unregister_device(ide_drive_t *);
-void ide_proc_unregister_port(ide_hwif_t *);
-void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
-void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
-
-int ide_capacity_proc_show(struct seq_file *m, void *v);
-int ide_geometry_proc_show(struct seq_file *m, void *v);
-#else
-static inline void proc_ide_create(void) { ; }
-static inline void proc_ide_destroy(void) { ; }
-static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
-static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_register_driver(ide_drive_t *drive,
- struct ide_driver *driver) { ; }
-static inline void ide_proc_unregister_driver(ide_drive_t *drive,
- struct ide_driver *driver) { ; }
-#endif
-
-enum {
- /* enter/exit functions */
- IDE_DBG_FUNC = BIT(0),
- /* sense key/asc handling */
- IDE_DBG_SENSE = BIT(1),
- /* packet commands handling */
- IDE_DBG_PC = BIT(2),
- /* request handling */
- IDE_DBG_RQ = BIT(3),
- /* driver probing/setup */
- IDE_DBG_PROBE = BIT(4),
-};
-
-/* DRV_NAME has to be defined in the driver before using the macro below */
-#define __ide_debug_log(lvl, fmt, args...) \
-{ \
- if (unlikely(drive->debug_mask & lvl)) \
- printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \
- __func__, ## args); \
-}
-
-/*
- * Power Management state machine (rq->pm->pm_step).
- *
- * For each step, the core calls ide_start_power_step() first.
- * This can return:
- * - ide_stopped : In this case, the core calls us back again unless
- * step have been set to ide_power_state_completed.
- * - ide_started : In this case, the channel is left busy until an
- * async event (interrupt) occurs.
- * Typically, ide_start_power_step() will issue a taskfile request with
- * do_rw_taskfile().
- *
- * Upon reception of the interrupt, the core will call ide_complete_power_step()
- * with the error code if any. This routine should update the step value
- * and return. It should not start a new request. The core will call
- * ide_start_power_step() for the new step value, unless step have been
- * set to IDE_PM_COMPLETED.
- */
-enum {
- IDE_PM_START_SUSPEND,
- IDE_PM_FLUSH_CACHE = IDE_PM_START_SUSPEND,
- IDE_PM_STANDBY,
-
- IDE_PM_START_RESUME,
- IDE_PM_RESTORE_PIO = IDE_PM_START_RESUME,
- IDE_PM_IDLE,
- IDE_PM_RESTORE_DMA,
-
- IDE_PM_COMPLETED,
-};
-
-int generic_ide_suspend(struct device *, pm_message_t);
-int generic_ide_resume(struct device *);
-
-void ide_complete_power_step(ide_drive_t *, struct request *);
-ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
-void ide_complete_pm_rq(ide_drive_t *, struct request *);
-void ide_check_pm_state(ide_drive_t *, struct request *);
-
-/*
- * Subdrivers support.
- *
- * The gendriver.owner field should be set to the module owner of this driver.
- * The gendriver.name field should be set to the name of this driver
- */
-struct ide_driver {
- const char *version;
- ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
- struct device_driver gen_driver;
- int (*probe)(ide_drive_t *);
- void (*remove)(ide_drive_t *);
- void (*resume)(ide_drive_t *);
- void (*shutdown)(ide_drive_t *);
-#ifdef CONFIG_IDE_PROC_FS
- ide_proc_entry_t * (*proc_entries)(ide_drive_t *);
- const struct ide_proc_devset * (*proc_devsets)(ide_drive_t *);
-#endif
-};
-
-#define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
-
-int ide_device_get(ide_drive_t *);
-void ide_device_put(ide_drive_t *);
-
-struct ide_ioctl_devset {
- unsigned int get_ioctl;
- unsigned int set_ioctl;
- const struct ide_devset *setting;
-};
-
-int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
- unsigned long, const struct ide_ioctl_devset *);
-
-int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
-
-extern int ide_vlb_clk;
-extern int ide_pci_clk;
-
-int ide_end_rq(ide_drive_t *, struct request *, blk_status_t, unsigned int);
-void ide_kill_rq(ide_drive_t *, struct request *);
-void ide_insert_request_head(ide_drive_t *, struct request *);
-
-void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
-void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
-
-void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
- unsigned int);
-
-void ide_pad_transfer(ide_drive_t *, int, int);
-
-ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
-
-void ide_fix_driveid(u16 *);
-
-extern void ide_fixstring(u8 *, const int, const int);
-
-int ide_busy_sleep(ide_drive_t *, unsigned long, int);
-
-int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *);
-int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
-
-ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
-ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
-
-extern ide_startstop_t ide_do_reset (ide_drive_t *);
-
-extern int ide_devset_execute(ide_drive_t *drive,
- const struct ide_devset *setting, int arg);
-
-void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
-int ide_complete_rq(ide_drive_t *, blk_status_t, unsigned int);
-
-void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
-void ide_tf_dump(const char *, struct ide_cmd *);
-
-void ide_exec_command(ide_hwif_t *, u8);
-u8 ide_read_status(ide_hwif_t *);
-u8 ide_read_altstatus(ide_hwif_t *);
-void ide_write_devctl(ide_hwif_t *, u8);
-
-void ide_dev_select(ide_drive_t *);
-void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
-void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
-
-void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
-void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
-
-void SELECT_MASK(ide_drive_t *, int);
-
-u8 ide_read_error(ide_drive_t *);
-void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
-
-int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
-
-int ide_check_atapi_device(ide_drive_t *, const char *);
-
-void ide_init_pc(struct ide_atapi_pc *);
-
-/* Disk head parking */
-extern wait_queue_head_t ide_park_wq;
-ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
- char *buf);
-ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len);
-
-/*
- * Special requests for ide-tape block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-enum {
- REQ_IDETAPE_PC1 = BIT(0), /* packet command (first stage) */
- REQ_IDETAPE_PC2 = BIT(1), /* packet command (second stage) */
- REQ_IDETAPE_READ = BIT(2),
- REQ_IDETAPE_WRITE = BIT(3),
-};
-
-int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
- void *, unsigned int);
-
-int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
-int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
-int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
-void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
-void ide_retry_pc(ide_drive_t *drive);
-
-void ide_prep_sense(ide_drive_t *drive, struct request *rq);
-int ide_queue_sense_rq(ide_drive_t *drive, void *special);
-
-int ide_cd_expiry(ide_drive_t *);
-
-int ide_cd_get_xferlen(struct request *);
-
-ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
-
-ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
-
-void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
-
-void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
-
-int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
-int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
-
-int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
-
-int ide_dev_read_id(ide_drive_t *, u8, u16 *, int);
-
-extern int ide_driveid_update(ide_drive_t *);
-extern int ide_config_drive_speed(ide_drive_t *, u8);
-extern u8 eighty_ninty_three (ide_drive_t *);
-extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
-
-extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
-
-extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
-
-extern void ide_timer_expiry(struct timer_list *t);
-extern irqreturn_t ide_intr(int irq, void *dev_id);
-extern blk_status_t ide_queue_rq(struct blk_mq_hw_ctx *, const struct blk_mq_queue_data *);
-extern blk_status_t ide_issue_rq(ide_drive_t *, struct request *, bool);
-extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq);
-
-void ide_init_disk(struct gendisk *, ide_drive_t *);
-
-#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
-#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
-#else
-#define ide_pci_register_driver(d) pci_register_driver(d)
-#endif
-
-static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
-{
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
- return 1;
- return 0;
-}
-
-void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
- struct ide_hw *, struct ide_hw **);
-void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-int ide_pci_set_master(struct pci_dev *, const char *);
-unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
-int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
-#else
-static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- return -EINVAL;
-}
-#endif
-
-struct ide_pci_enablebit {
- u8 reg; /* byte pci reg holding the enable-bit */
- u8 mask; /* mask to isolate the enable-bit */
- u8 val; /* value of masked reg when "enabled" */
-};
-
-enum {
- /* Uses ISA control ports not PCI ones. */
- IDE_HFLAG_ISA_PORTS = BIT(0),
- /* single port device */
- IDE_HFLAG_SINGLE = BIT(1),
- /* don't use legacy PIO blacklist */
- IDE_HFLAG_PIO_NO_BLACKLIST = BIT(2),
- /* set for the second port of QD65xx */
- IDE_HFLAG_QD_2ND_PORT = BIT(3),
- /* use PIO8/9 for prefetch off/on */
- IDE_HFLAG_ABUSE_PREFETCH = BIT(4),
- /* use PIO6/7 for fast-devsel off/on */
- IDE_HFLAG_ABUSE_FAST_DEVSEL = BIT(5),
- /* use 100-102 and 200-202 PIO values to set DMA modes */
- IDE_HFLAG_ABUSE_DMA_MODES = BIT(6),
- /*
- * keep DMA setting when programming PIO mode, may be used only
- * for hosts which have separate PIO and DMA timings (ie. PMAC)
- */
- IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = BIT(7),
- /* program host for the transfer mode after programming device */
- IDE_HFLAG_POST_SET_MODE = BIT(8),
- /* don't program host/device for the transfer mode ("smart" hosts) */
- IDE_HFLAG_NO_SET_MODE = BIT(9),
- /* trust BIOS for programming chipset/device for DMA */
- IDE_HFLAG_TRUST_BIOS_FOR_DMA = BIT(10),
- /* host is CS5510/CS5520 */
- IDE_HFLAG_CS5520 = BIT(11),
- /* ATAPI DMA is unsupported */
- IDE_HFLAG_NO_ATAPI_DMA = BIT(12),
- /* set if host is a "non-bootable" controller */
- IDE_HFLAG_NON_BOOTABLE = BIT(13),
- /* host doesn't support DMA */
- IDE_HFLAG_NO_DMA = BIT(14),
- /* check if host is PCI IDE device before allowing DMA */
- IDE_HFLAG_NO_AUTODMA = BIT(15),
- /* host uses MMIO */
- IDE_HFLAG_MMIO = BIT(16),
- /* no LBA48 */
- IDE_HFLAG_NO_LBA48 = BIT(17),
- /* no LBA48 DMA */
- IDE_HFLAG_NO_LBA48_DMA = BIT(18),
- /* data FIFO is cleared by an error */
- IDE_HFLAG_ERROR_STOPS_FIFO = BIT(19),
- /* serialize ports */
- IDE_HFLAG_SERIALIZE = BIT(20),
- /* host is DTC2278 */
- IDE_HFLAG_DTC2278 = BIT(21),
- /* 4 devices on a single set of I/O ports */
- IDE_HFLAG_4DRIVES = BIT(22),
- /* host is TRM290 */
- IDE_HFLAG_TRM290 = BIT(23),
- /* use 32-bit I/O ops */
- IDE_HFLAG_IO_32BIT = BIT(24),
- /* unmask IRQs */
- IDE_HFLAG_UNMASK_IRQS = BIT(25),
- IDE_HFLAG_BROKEN_ALTSTATUS = BIT(26),
- /* serialize ports if DMA is possible (for sl82c105) */
- IDE_HFLAG_SERIALIZE_DMA = BIT(27),
- /* force host out of "simplex" mode */
- IDE_HFLAG_CLEAR_SIMPLEX = BIT(28),
- /* DSC overlap is unsupported */
- IDE_HFLAG_NO_DSC = BIT(29),
- /* never use 32-bit I/O ops */
- IDE_HFLAG_NO_IO_32BIT = BIT(30),
- /* never unmask IRQs */
- IDE_HFLAG_NO_UNMASK_IRQS = BIT(31),
-};
-
-#ifdef CONFIG_BLK_DEV_OFFBOARD
-# define IDE_HFLAG_OFF_BOARD 0
-#else
-# define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
-#endif
-
-struct ide_port_info {
- char *name;
-
- int (*init_chipset)(struct pci_dev *);
-
- void (*get_lock)(irq_handler_t, void *);
- void (*release_lock)(void);
-
- void (*init_iops)(ide_hwif_t *);
- void (*init_hwif)(ide_hwif_t *);
- int (*init_dma)(ide_hwif_t *,
- const struct ide_port_info *);
-
- const struct ide_tp_ops *tp_ops;
- const struct ide_port_ops *port_ops;
- const struct ide_dma_ops *dma_ops;
-
- struct ide_pci_enablebit enablebits[2];
-
- hwif_chipset_t chipset;
-
- u16 max_sectors; /* if < than the default one */
-
- u32 host_flags;
-
- int irq_flags;
-
- u8 pio_mask;
- u8 swdma_mask;
- u8 mwdma_mask;
- u8 udma_mask;
-};
-
-/*
- * State information carried for REQ_TYPE_ATA_PM_SUSPEND and REQ_TYPE_ATA_PM_RESUME
- * requests.
- */
-struct ide_pm_state {
- /* PM state machine step value, currently driver specific */
- int pm_step;
- /* requested PM state value (S1, S2, S3, S4, ...) */
- u32 pm_state;
- void* data; /* for driver use */
-};
-
-
-int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
-int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
- const struct ide_port_info *, void *);
-void ide_pci_remove(struct pci_dev *);
-
-#ifdef CONFIG_PM
-int ide_pci_suspend(struct pci_dev *, pm_message_t);
-int ide_pci_resume(struct pci_dev *);
-#else
-#define ide_pci_suspend NULL
-#define ide_pci_resume NULL
-#endif
-
-void ide_map_sg(ide_drive_t *, struct ide_cmd *);
-void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
-
-#define BAD_DMA_DRIVE 0
-#define GOOD_DMA_DRIVE 1
-
-struct drive_list_entry {
- const char *id_model;
- const char *id_firmware;
-};
-
-int ide_in_drive_list(u16 *, const struct drive_list_entry *);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-int ide_dma_good_drive(ide_drive_t *);
-int __ide_dma_bad_drive(ide_drive_t *);
-
-u8 ide_find_dma_mode(ide_drive_t *, u8);
-
-static inline u8 ide_max_dma_mode(ide_drive_t *drive)
-{
- return ide_find_dma_mode(drive, XFER_UDMA_6);
-}
-
-void ide_dma_off_quietly(ide_drive_t *);
-void ide_dma_off(ide_drive_t *);
-void ide_dma_on(ide_drive_t *);
-int ide_set_dma(ide_drive_t *);
-void ide_check_dma_crc(ide_drive_t *);
-ide_startstop_t ide_dma_intr(ide_drive_t *);
-
-int ide_allocate_dma_engine(ide_hwif_t *);
-void ide_release_dma_engine(ide_hwif_t *);
-
-int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
-void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-int config_drive_for_dma(ide_drive_t *);
-int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
-void ide_dma_host_set(ide_drive_t *, int);
-int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
-extern void ide_dma_start(ide_drive_t *);
-int ide_dma_end(ide_drive_t *);
-int ide_dma_test_irq(ide_drive_t *);
-int ide_dma_sff_timer_expiry(ide_drive_t *);
-u8 ide_dma_sff_read_status(ide_hwif_t *);
-extern const struct ide_dma_ops sff_dma_ops;
-#else
-static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
-
-void ide_dma_lost_irq(ide_drive_t *);
-ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
-
-#else
-static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
-static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
-static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
-static inline void ide_dma_off(ide_drive_t *drive) { ; }
-static inline void ide_dma_on(ide_drive_t *drive) { ; }
-static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
-static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
-static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
-static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
-static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
-static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
-static inline int ide_dma_prepare(ide_drive_t *drive,
- struct ide_cmd *cmd) { return 1; }
-static inline void ide_dma_unmap_sg(ide_drive_t *drive,
- struct ide_cmd *cmd) { ; }
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-int ide_acpi_init(void);
-bool ide_port_acpi(ide_hwif_t *hwif);
-extern int ide_acpi_exec_tfs(ide_drive_t *drive);
-extern void ide_acpi_get_timing(ide_hwif_t *hwif);
-extern void ide_acpi_push_timing(ide_hwif_t *hwif);
-void ide_acpi_init_port(ide_hwif_t *);
-void ide_acpi_port_init_devices(ide_hwif_t *);
-extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
-#else
-static inline int ide_acpi_init(void) { return 0; }
-static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
-static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
-static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
-#endif
-
-void ide_check_nien_quirk_list(ide_drive_t *);
-void ide_undecoded_slave(ide_drive_t *);
-
-void ide_port_apply_params(ide_hwif_t *);
-int ide_sysfs_register_port(ide_hwif_t *);
-
-struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
- unsigned int);
-void ide_host_free(struct ide_host *);
-int ide_host_register(struct ide_host *, const struct ide_port_info *,
- struct ide_hw **);
-int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
- struct ide_host **);
-void ide_host_remove(struct ide_host *);
-int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
-void ide_port_unregister_devices(ide_hwif_t *);
-void ide_port_scan(ide_hwif_t *);
-
-static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
-{
- return hwif->hwif_data;
-}
-
-static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
-{
- hwif->hwif_data = data;
-}
-
-u64 ide_get_lba_addr(struct ide_cmd *, int);
-u8 ide_dump_status(ide_drive_t *, const char *, u8);
-
-struct ide_timing {
- u8 mode;
- u8 setup; /* t1 */
- u16 act8b; /* t2 for 8-bit io */
- u16 rec8b; /* t2i for 8-bit io */
- u16 cyc8b; /* t0 for 8-bit io */
- u16 active; /* t2 or tD */
- u16 recover; /* t2i or tK */
- u16 cycle; /* t0 */
- u16 udma; /* t2CYCTYP/2 */
-};
-
-enum {
- IDE_TIMING_SETUP = BIT(0),
- IDE_TIMING_ACT8B = BIT(1),
- IDE_TIMING_REC8B = BIT(2),
- IDE_TIMING_CYC8B = BIT(3),
- IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
- IDE_TIMING_CYC8B,
- IDE_TIMING_ACTIVE = BIT(4),
- IDE_TIMING_RECOVER = BIT(5),
- IDE_TIMING_CYCLE = BIT(6),
- IDE_TIMING_UDMA = BIT(7),
- IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
- IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
- IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
-};
-
-struct ide_timing *ide_timing_find_mode(u8);
-u16 ide_pio_cycle_time(ide_drive_t *, u8);
-void ide_timing_merge(struct ide_timing *, struct ide_timing *,
- struct ide_timing *, unsigned int);
-int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
-
-#ifdef CONFIG_IDE_XFER_MODE
-int ide_scan_pio_blacklist(char *);
-const char *ide_xfer_verbose(u8);
-int ide_pio_need_iordy(ide_drive_t *, const u8);
-int ide_set_pio_mode(ide_drive_t *, u8);
-int ide_set_dma_mode(ide_drive_t *, u8);
-void ide_set_pio(ide_drive_t *, u8);
-int ide_set_xfer_rate(ide_drive_t *, u8);
-#else
-static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
-static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
-#endif
-
-static inline void ide_set_max_pio(ide_drive_t *drive)
-{
- ide_set_pio(drive, 255);
-}
-
-char *ide_media_string(ide_drive_t *);
-
-extern const struct attribute_group *ide_dev_groups[];
-extern struct bus_type ide_bus_type;
-extern struct class *ide_port_class;
-
-static inline void ide_dump_identify(u8 *id)
-{
- print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
-}
-
-static inline int hwif_to_node(ide_hwif_t *hwif)
-{
- return hwif->dev ? dev_to_node(hwif->dev) : -1;
-}
-
-static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
-{
- ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
-
- return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
-}
-
-static inline void *ide_get_drivedata(ide_drive_t *drive)
-{
- return drive->drive_data;
-}
-
-static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
-{
- drive->drive_data = data;
-}
-
-#define ide_port_for_each_dev(i, dev, port) \
- for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
-
-#define ide_port_for_each_present_dev(i, dev, port) \
- for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
- if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
-
-#define ide_host_for_each_port(i, port, host) \
- for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
-
-
-#endif /* _IDE_H */
--
2.30.2
Powered by blists - more mailing lists