[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210618061516.662-50-jslaby@suse.cz>
Date: Fri, 18 Jun 2021 08:14:55 +0200
From: Jiri Slaby <jslaby@...e.cz>
To: gregkh@...uxfoundation.org
Cc: linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
Jiri Slaby <jslaby@...e.cz>
Subject: [PATCH 49/70] mxser: cleanup mxser_process_txrx_fifo
Rename process_txrx_fifo to mxser_process_txrx_fifo and:
* remove useless parentheses
* return from the 'if's true branch and process the rest in normal code
flow (shift the code one level left)
All this to make the code more readable.
Signed-off-by: Jiri Slaby <jslaby@...e.cz>
---
drivers/tty/mxser.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index bb4110d466cb..1e54e94a7ca6 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -398,22 +398,24 @@ static enum mxser_must_hwid mxser_must_get_hwid(unsigned long io)
return MOXA_OTHER_UART;
}
-static void process_txrx_fifo(struct mxser_port *info)
+static void mxser_process_txrx_fifo(struct mxser_port *info)
{
- int i;
+ unsigned int i;
- if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
+ if (info->type == PORT_16450 || info->type == PORT_8250) {
info->rx_high_water = 1;
info->rx_low_water = 1;
info->xmit_fifo_size = 1;
- } else
- for (i = 0; i < UART_INFO_NUM; i++)
- if (info->board->must_hwid == Gpci_uart_info[i].type) {
- info->rx_low_water = Gpci_uart_info[i].rx_low_water;
- info->rx_high_water = Gpci_uart_info[i].rx_high_water;
- info->xmit_fifo_size = Gpci_uart_info[i].fifo_size;
- break;
- }
+ return;
+ }
+
+ for (i = 0; i < UART_INFO_NUM; i++)
+ if (info->board->must_hwid == Gpci_uart_info[i].type) {
+ info->rx_low_water = Gpci_uart_info[i].rx_low_water;
+ info->rx_high_water = Gpci_uart_info[i].rx_high_water;
+ info->xmit_fifo_size = Gpci_uart_info[i].fifo_size;
+ break;
+ }
}
static int mxser_carrier_raised(struct tty_port *port)
@@ -1149,7 +1151,7 @@ static int mxser_set_serial_info(struct tty_struct *tty,
info->type = ss->type;
- process_txrx_fifo(info);
+ mxser_process_txrx_fifo(info);
}
if (tty_port_initialized(port)) {
@@ -1895,7 +1897,7 @@ static void mxser_initbrd(struct mxser_board *brd, bool high_baud)
info->type = PORT_16550A;
- process_txrx_fifo(info);
+ mxser_process_txrx_fifo(info);
info->port.close_delay = 5 * HZ / 10;
info->port.closing_wait = 30 * HZ;
--
2.32.0
Powered by blists - more mailing lists