linux-kernel - Re: [PATCH] net: bcmgenet: Fix attaching to PYH failed on RPi 4B

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CALeDE9MjRLjTQ1R2nw_rnXsCXKHLMx8XqvG881xgqKz2aJRGfA@mail.gmail.com>
Date:   Mon, 21 Jun 2021 17:56:08 +0100
From:   Peter Robinson <pbrobinson@...il.com>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     Andrew Lunn <andrew@...n.ch>, Jian-Hong Pan <jhp@...lessos.org>,
        Doug Berger <opendmb@...il.com>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux@...lessos.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-rpi-kernel@...ts.infradead.org
Subject: Re: [PATCH] net: bcmgenet: Fix attaching to PYH failed on RPi 4B

On Mon, Jun 21, 2021 at 5:39 PM Florian Fainelli <f.fainelli@...il.com> wrote:
>
> On 6/21/21 6:09 AM, Andrew Lunn wrote:
> > On Mon, Jun 21, 2021 at 06:33:11PM +0800, Jian-Hong Pan wrote:
> >> The Broadcom UniMAC MDIO bus comes too late. So, GENET cannot find the
> >> ethernet PHY on UniMAC MDIO bus. This leads GENET fail to attach the
> >> PHY.
> >>
> >> bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
> >> ...
> >> could not attach to PHY
> >> bcmgenet fd580000.ethernet eth0: failed to connect to PHY
> >> uart-pl011 fe201000.serial: no DMA platform data
> >> libphy: bcmgenet MII bus: probed
> >> ...
> >> unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
> >>
> >> This patch makes GENET try to connect the PHY up to 3 times. Also, waits
> >> a while between each time for mdio-bcm-unimac module's loading and
> >> probing.
> >
> > Don't loop. Return -EPROBE_DEFER. The driver core will then probed the
> > driver again later, by which time, the MDIO bus driver should of
> > probed.
>
> This is unlikely to work because GENET register the mdio-bcm-unimac
> platform device so we will likely run into a chicken and egg problem,
> though surprisingly I have not seen this on STB platforms where GENET is
> used, I will try building everything as a module like you do. Can you
> see if the following helps:

For reference we have mdio_bcm_unimac/genet both built as modules in
Fedora and I've not seen this issue reported using vanilla upstream
kernels if that's a useful reference point.

Regards,
Peter