lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 24 Jun 2021 09:28:59 +0200
From:   Johan Hovold <johan@...nel.org>
To:     Stefan Brüns <stefan.bruens@...h-aachen.de>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Daniele Palmas <dnlplm@...il.com>,
        Bjørn Mork <bjorn@...k.no>
Subject: Re: [PATCH v2] USB: serial: qcserial: Support for SDX55 based Sierra
 Wireless 5G modules

[ +CC: Daniele and Bjørn ]

On Fri, Jun 11, 2021 at 03:58:41PM +0200, Stefan Brüns wrote:
> The devices exposes two different interface compositions:
> - QDL mode, single interface
> - MBIM mode, MBIM class compliant plus AT/DM(/ADB)
> 
> Current firmware versions (up to 01.07.19) do not expose an NMEA port.

We already have at least one SDX55 based modem (FN980) supported by the
option driver. Any particular reason why you chose to add it to qcserial
instead of option?

Note that the FN980 also needs the ZLP flag set in QDL (flashing) mode,
I'd assume this one needs it too.

Could you please also post the output of usb-devices (or lsusb -v) for
this device in MBIM mode?

> Signed-off-by: Stefan Brüns <stefan.bruens@...h-aachen.de>
> ---
>  drivers/usb/serial/qcserial.c | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
> index 83da8236e3c8..4ff325a14c98 100644
> --- a/drivers/usb/serial/qcserial.c
> +++ b/drivers/usb/serial/qcserial.c
> @@ -26,12 +26,15 @@ enum qcserial_layouts {
>  	QCSERIAL_G1K = 1,	/* Gobi 1000 */
>  	QCSERIAL_SWI = 2,	/* Sierra Wireless */
>  	QCSERIAL_HWI = 3,	/* Huawei */
> +	QCSERIAL_SWI2 = 4,	/* Sierra Wireless */
>  };
>  
>  #define DEVICE_G1K(v, p) \
>  	USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
>  #define DEVICE_SWI(v, p) \
>  	USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
> +#define DEVICE_SWI2(v, p) \
> +	USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI2
>  #define DEVICE_HWI(v, p) \
>  	USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
>  
> @@ -181,6 +184,10 @@ static const struct usb_device_id id_table[] = {
>  	{DEVICE_SWI(0x413c, 0x81d1)},   /* Dell Wireless 5818 */
>  	{DEVICE_SWI(0x413c, 0x81d2)},   /* Dell Wireless 5818 */
>  
> +	/* SDX55 based Sierra Wireless devices */
> +	{DEVICE_SWI2(0x1199, 0x90d2)},	/* Sierra Wireless EM919x QDL */
> +	{DEVICE_SWI2(0x1199, 0x90d3)},	/* Sierra Wireless EM919x */
> +
>  	/* Huawei devices */
>  	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
>  
> @@ -359,6 +366,28 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
>  			break;
>  		}
>  		break;
> +	case QCSERIAL_SWI2:
> +		/*
> +		 * Sierra Wireless SDX55 in MBIM mode:
> +		 * 0/1: MBIM Control/Data
> +		 * 3: AT-capable modem port
> +		 * 4: DM/DIAG (use libqcdm from ModemManager for communication)
> +		 * 5: ADB
> +		 */
> +		switch (ifnum) {
> +		case 3:
> +			dev_dbg(dev, "Modem port found\n");
> +			sendsetup = true;
> +			break;
> +		case 4:
> +			dev_dbg(dev, "DM/DIAG interface found\n");
> +			break;
> +		default:
> +			/* don't claim any unsupported interface */
> +			altsetting = -1;
> +			break;
> +		}
> +		break;
>  	case QCSERIAL_HWI:
>  		/*
>  		 * Huawei devices map functions by subclass + protocol

Johan

Powered by blists - more mailing lists