[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJpob=TpXiJozac-5sKJzE71ddWRFDj7D2-F=W=a2mgKvxA@mail.gmail.com>
Date: Thu, 1 Jul 2021 19:39:29 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Ulf Hansson <ulf.hansson@...aro.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Taniya Das <tdas@...eaurora.org>,
Jonathan Marek <jonathan@...ek.ca>,
Michael Turquette <mturquette@...libre.com>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>,
"Bryan O'Donoghue" <bryan.odonoghue@...aro.org>,
Mark Brown <broonie@...nel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx
power domain
On Thu, 1 Jul 2021 at 19:17, Ulf Hansson <ulf.hansson@...aro.org> wrote:
>
> On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov
> <dmitry.baryshkov@...aro.org> wrote:
> >
> > On sm8250 dispcc requires MMCX power domain to be powered up before
> > clock controller's registers become available. For now sm8250 was using
> > external regulator driven by the power domain to describe this
> > relationship. Switch into specifying power-domain and required opp-state
> > directly.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> > ---
> > .../bindings/clock/qcom,dispcc-sm8x50.yaml | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > index 0cdf53f41f84..48d86fb34fa7 100644
> > --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > @@ -55,6 +55,16 @@ properties:
> > reg:
> > maxItems: 1
> >
> > + power-domains:
> > + description:
> > + A phandle and PM domain specifier for the MMCX power domain.
> > + maxItems: 1
> > +
>
> Should you perhaps state that this is a parent domain? Or it isn't?
>
> Related to this and because this is a power domain provider, you
> should probably reference the common power-domain bindings somewhere
> here. Along the lines of this:
>
> - $ref: power-domain.yaml#
>
> As an example, you could have a look at
> Documentation/devicetree/bindings/power/pd-samsung.yaml.
I'll take a look.
>
> > + required-opps:
> > + description:
> > + Performance state to use for MMCX to enable register access.
> > + maxItems: 1
>
> According to the previous discussions, I was under the assumption that
> this property belongs to a consumer node rather than in the provider
> node, no?
It is both a consumer and a provider. It consumes SM8250_MMCX from
rpmhpd and provides MMSC_GDSC.
>
> > +
> > required:
> > - compatible
> > - reg
> > @@ -64,6 +74,15 @@ required:
> > - '#reset-cells'
> > - '#power-domain-cells'
> >
> > +# Either both properties are present or both are absent
> > +dependencies:
> > + power-domains:
> > + required:
> > + - required-opps
> > + required-opps:
> > + required:
> > + - power-domains
> > +
> > additionalProperties: false
> >
> > examples:
> > --
> > 2.30.2
> >
>
> Kind regards
> Uffe
--
With best wishes
Dmitry
Powered by blists - more mailing lists