linux-kernel - Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210712201125.GA2401230@robh.at.kernel.org>
Date:   Mon, 12 Jul 2021 14:11:25 -0600
From:   Rob Herring <robh@...nel.org>
To:     Corentin Labbe <clabbe@...libre.com>
Cc:     arnd@...db.de, linus.walleij@...aro.org, olof@...om.net,
        soc@...nel.org, ulli.kroll@...glemail.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

On Fri, Jun 18, 2021 at 08:55:33PM +0000, Corentin Labbe wrote:
> The SSI 1328 is a NAS box running a SL3516 SoC.
> 
> Signed-off-by: Corentin Labbe <clabbe@...libre.com>
> ---
>  arch/arm/boot/dts/Makefile           |   1 +
>  arch/arm/boot/dts/gemini-ssi1328.dts | 138 +++++++++++++++++++++++++++
>  2 files changed, 139 insertions(+)
>  create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 806715f3266d..49bf7af72111 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -221,6 +221,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
>  	gemini-rut1xx.dtb \
>  	gemini-sl93512r.dtb \
>  	gemini-sq201.dtb \
> +	gemini-ssi1328.dtb \
>  	gemini-wbd111.dtb \
>  	gemini-wbd222.dtb
>  dtb-$(CONFIG_ARCH_HI3xxx) += \
> diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
> new file mode 100644
> index 000000000000..2b3e7db84fed
> --- /dev/null
> +++ b/arch/arm/boot/dts/gemini-ssi1328.dts
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0

Dual license? No one runs BSD or other OS on these devices?

> +/*
> + * Copyright (C) 2021 Corentin Labbe <clabbe@...libre.com>
> + * Device Tree file for SSI 1328
> + */
> +
> +/dts-v1/;
> +
> +#include "gemini.dtsi"

Though the license should match this file.

> +
> +/ {
> +	model = "SSI 1328";
> +	compatible = "ssi,1328", "cortina,gemini";

Where's ssi,1328 documented?

> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	memory@0 {
> +		/* 128 MB */
> +		device_type = "memory";
> +		reg = <0x00000000 0x8000000>;
> +	};
> +
> +	aliases {
> +		mdio-gpio0 = &mdio0;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> +		stdout-path = &uart0;

Don't need both 'console' and stdout-path. (console should be removed)

> +	};
> +
> +	mdio0: mdio {
> +		compatible = "virtual,mdio-gpio";
> +		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
> +			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* LAN Marvell 88E1118 */
> +		phy0: ethernet-phy@1 {
> +			reg = <1>;
> +			device_type = "ethernet-phy";
> +			/* We lack the knowledge of necessary GPIO to achieve
> +			 * Gigabit
> +			 */
> +			max-speed = <100>;
> +		};
> +		/* WAN ICPlus IP101A */
> +		phy1: ethernet-phy@2 {
> +			reg = <2>;
> +			device_type = "ethernet-phy";
> +		};
> +	};
> +};
> +
> +&ethernet {
> +	status = "okay";
> +	ethernet-port@0 {
> +		phy-mode = "rgmii";
> +		phy-handle = <&phy0>;
> +	};
> +	ethernet-port@1 {
> +		phy-mode = "rgmii";
> +		phy-handle = <&phy1>;
> +	};
> +};
> +
> +&flash {
> +	status = "okay";
> +	/* 32MB of flash */
> +	reg = <0x30000000 0x03200000>;
> +
> +	pinctrl-names = "enabled", "disabled";
> +	pinctrl-0 = <&pflash_default_pins>;
> +	pinctrl-1 = <&pflash_disabled_pins>;
> +
> +	partitions {
> +		compatible = "redboot-fis";
> +		/* Eraseblock at 0xfe0000 */
> +		fis-index-block = <0x7F>;
> +	};
> +};
> +
> +&gpio0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gpio0_default_pins>;
> +};
> +
> +&ide0 {
> +	status = "okay";
> +};
> +
> +&ide1 {
> +	status = "okay";
> +};
> +
> +&sata {
> +	cortina,gemini-ata-muxmode = <0>;
> +	cortina,gemini-enable-sata-bridge;
> +	status = "okay";
> +};
> +
> +&syscon {
> +	pinctrl {
> +		/*
> +		 * gpio0agrp cover line 0-4
> +		 * gpio0bgrp cover line 5
> +		 */
> +		gpio0_default_pins: pinctrl-gpio0 {
> +			mux {
> +				function = "gpio0";
> +				groups = "gpio0agrp", "gpio0bgrp";
> +			};
> +		};
> +		pflash_disabled_pins: pinctrl-pflash-disabled {
> +			mux {
> +				function = "gpio0";
> +				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
> +					 "gpio0kgrp";
> +			};
> +		};
> +		pinctrl-gmii {
> +			/* This platform use both the ethernet ports */
> +			mux {
> +				function = "gmii";
> +				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
> +			};
> +		};
> +	};
> +};
> +
> +&usb0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +};
> -- 
> 2.31.1
> 
>