[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210714210803.GA3522064@robh.at.kernel.org>
Date: Wed, 14 Jul 2021 15:08:03 -0600
From: Rob Herring <robh@...nel.org>
To: Harini Katakam <harini.katakam@...inx.com>
Cc: andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk,
davem@...emloft.net, kuba@...nel.org, steen.hegelund@...rochip.com,
bjarni.jonasson@...rochip.com, ioana.ciornei@....com,
likaige@...ngson.cn, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
harinikatakamlinux@...il.com, michal.simek@...inx.com,
radhey.shyam.pandey@...inx.com
Subject: Re: [PATCH 2/3] dt-bindings: mscc: Add RGMII RX and TX delay tuning
On Tue, Jun 29, 2021 at 03:10:37PM +0530, Harini Katakam wrote:
> Add optional properties to tune RGMII RX and TX delay.
>
> Signed-off-by: Harini Katakam <harini.katakam@...inx.com>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>
> Signed-off-by: Michal Simek <michal.simek@...inx.com>
Your S-o-b should be last as the last one to touch this.
> ---
> .../devicetree/bindings/net/mscc-phy-vsc8531.txt | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> index 87a27d775d48..e201d24d8e27 100644
> --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> @@ -33,7 +33,14 @@ Optional properties:
> VSC8531_DUPLEX_COLLISION (8).
> - load-save-gpios : GPIO used for the load/save operation of the PTP
> hardware clock (PHC).
> -
> +- vsc8531,rx-delay : RGMII RX delay. Allowed values are defined in
'vsc8531' is not a vendor. The form is <vendor>,<propname>.
> + "include/dt-bindings/net/mscc-phy-vsc8531.h".
> + Default value, set by the driver is
> + VSC8531_RGMII_CLK_DELAY_2_0_NS.
> +- vsc8531,tx-delay : RGMII TX delay. Allowed values are defined in
> + "include/dt-bindings/net/mscc-phy-vsc8531.h".
> + Default value, set by the driver is
> + VSC8531_RGMII_CLK_DELAY_2_0_NS.
>
> Table: 1 - Edge rate change
> ----------------------------------------------------------------|
> --
> 2.17.1
>
>
Powered by blists - more mailing lists