linux-kernel - [PATCH 2/3] Bluetooth: hci_h5: btrtl: Maintain flow control if wakeup is enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 14 Jul 2021 15:13:39 +0800
From:   Archie Pusaka <apusaka@...gle.com>
To:     linux-bluetooth <linux-bluetooth@...r.kernel.org>,
        Marcel Holtmann <marcel@...tmann.org>
Cc:     CrosBT Upstreaming <chromeos-bluetooth-upstreaming@...omium.org>,
        Archie Pusaka <apusaka@...omium.org>,
        Abhishek Pandit-Subedi <abhishekpandit@...omium.org>,
        Hilda Wu <hildawu@...ltek.com>,
        Johan Hedberg <johan.hedberg@...il.com>,
        Luiz Augusto von Dentz <luiz.dentz@...il.com>,
        linux-kernel@...r.kernel.org
Subject: [PATCH 2/3] Bluetooth: hci_h5: btrtl: Maintain flow control if wakeup
 is enabled

From: Archie Pusaka <apusaka@...omium.org>

For chips that doesn't reset on suspend, we need to provide the correct
value of flow_control when it resumes. Therefore, store the flow
control value when reading from the config file to be reused upon
suspend.

Signed-off-by: Archie Pusaka <apusaka@...omium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
Reviewed-by: Hilda Wu <hildawu@...ltek.com>

---

 drivers/bluetooth/hci_h5.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 947246569434..67fcf192d5c5 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -54,6 +54,7 @@ enum {
 	H5_RX_ESC,		/* SLIP escape mode */
 	H5_TX_ACK_REQ,		/* Pending ack to send */
 	H5_WAKEUP_DISABLE,	/* Device cannot wake host */
+	H5_HW_FLOW_CONTROL,	/* Use HW flow control */
 };
 
 struct h5 {
@@ -923,6 +924,9 @@ static int h5_btrtl_setup(struct h5 *h5)
 	serdev_device_set_baudrate(h5->hu->serdev, controller_baudrate);
 	serdev_device_set_flow_control(h5->hu->serdev, flow_control);
 
+	if (flow_control)
+		set_bit(H5_HW_FLOW_CONTROL, &h5->flags);
+
 	err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev);
 	/* Give the device some time before the hci-core sends it a reset */
 	usleep_range(10000, 20000);
@@ -1015,7 +1019,11 @@ static int h5_btrtl_resume(struct h5 *h5)
 		queue_work(system_long_wq, &reprobe->work);
 	} else {
 		gpiod_set_value_cansleep(h5->device_wake_gpio, 1);
+
+		if (test_bit(H5_HW_FLOW_CONTROL, &h5->flags))
+			serdev_device_set_flow_control(h5->hu->serdev, true);
 	}
+
 	return 0;
 }
 
-- 
2.32.0.93.g670b81a890-goog