| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+HBbNFj5+6sLKxmL8XtsZQ48ch8OjTbJ1bwkDC8dfRiOyWY1Q@mail.gmail.com>
Date: Sun, 18 Jul 2021 11:15:38 +0200
From: Robert Marko <robert.marko@...tura.hr>
To: Rob Herring <robh@...nel.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Lee Jones <lee.jones@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Luka Perkov <luka.perkov@...tura.hr>, jmp@...phyte.org,
Paul Menzel <pmenzel@...gen.mpg.de>,
Donald Buczek <buczek@...gen.mpg.de>
Subject: Re: [PATCH v6 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings
On Wed, Jul 14, 2021 at 12:25 AM Rob Herring <robh@...nel.org> wrote:
>
> On Fri, Jun 25, 2021 at 01:46:08PM +0200, Robert Marko wrote:
> > On Mon, Jun 7, 2021 at 2:33 PM Robert Marko <robert.marko@...tura.hr> wrote:
> > >
> > > Add binding documents for the Delta TN48M CPLD drivers.
> > >
> > > Signed-off-by: Robert Marko <robert.marko@...tura.hr>
> > > ---
> > > Changes in v3:
> > > * Include bindings for reset driver
> > >
> > > Changes in v2:
> > > * Implement MFD as a simple I2C MFD
> > > * Add GPIO bindings as separate
> > >
> > > .../bindings/gpio/delta,tn48m-gpio.yaml | 42 +++++++++
> > > .../bindings/mfd/delta,tn48m-cpld.yaml | 90 +++++++++++++++++++
> > > .../bindings/reset/delta,tn48m-reset.yaml | 35 ++++++++
> > > 3 files changed, 167 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
> > > create mode 100644 Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
> > > create mode 100644 Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
> > > new file mode 100644
> > > index 000000000000..aca646aecb12
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
> > > @@ -0,0 +1,42 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/gpio/delta,tn48m-gpio.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Delta Networks TN48M CPLD GPIO controller
> > > +
> > > +maintainers:
> > > + - Robert Marko <robert.marko@...tura.hr>
> > > +
> > > +description: |
> > > + This module is part of the Delta TN48M multi-function device. For more
> > > + details see ../mfd/delta,tn48m-cpld.yaml.
> > > +
> > > + GPIO controller module provides GPIO-s for the SFP slots.
> > > + It is split into 3 controllers, one output only for the SFP TX disable
> > > + pins, one input only for the SFP present pins and one input only for
> > > + the SFP LOS pins.
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - delta,tn48m-gpio-sfp-tx-disable
> > > + - delta,tn48m-gpio-sfp-present
> > > + - delta,tn48m-gpio-sfp-los
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + "#gpio-cells":
> > > + const: 2
> > > +
> > > + gpio-controller: true
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - "#gpio-cells"
> > > + - gpio-controller
> > > +
> > > +additionalProperties: false
> > > diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
> > > new file mode 100644
> > > index 000000000000..2c6e2adf73ca
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
> > > @@ -0,0 +1,90 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Delta Networks TN48M CPLD controller
> > > +
> > > +maintainers:
> > > + - Robert Marko <robert.marko@...tura.hr>
> > > +
> > > +description: |
> > > + Lattice CPLD onboard the TN48M switches is used for system
> > > + management.
> > > +
> > > + It provides information about the hardware model, revision,
> > > + PSU status etc.
> > > +
> > > + It is also being used as a GPIO expander for the SFP slots and
> > > + reset controller for the switch MAC-s and other peripherals.
> > > +
> > > +properties:
> > > + compatible:
> > > + const: delta,tn48m-cpld
> > > +
> > > + reg:
> > > + description:
> > > + I2C device address.
> > > + maxItems: 1
> > > +
> > > + "#address-cells":
> > > + const: 1
> > > +
> > > + "#size-cells":
> > > + const: 0
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - "#address-cells"
> > > + - "#size-cells"
> > > +
> > > +patternProperties:
> > > + "^gpio(@[0-9a-f]+)?$":
> > > + $ref: ../gpio/delta,tn48m-gpio.yaml
> > > +
> > > + "^reset-controller?$":
> > > + $ref: ../reset/delta,tn48m-reset.yaml
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + i2c {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + cpld@41 {
> > > + compatible = "delta,tn48m-cpld";
> > > + reg = <0x41>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + gpio@31 {
> > > + compatible = "delta,tn48m-gpio-sfp-tx-disable";
> > > + reg = <0x31>;
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > + };
> > > +
> > > + gpio@3a {
> > > + compatible = "delta,tn48m-gpio-sfp-present";
> > > + reg = <0x3a>;
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > + };
> > > +
> > > + gpio@40 {
> > > + compatible = "delta,tn48m-gpio-sfp-los";
> > > + reg = <0x40>;
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > + };
> > > +
> > > + reset-controller {
> > > + compatible = "delta,tn48m-reset";
> > > + #reset-cells = <1>;
> > > + };
> > > + };
> > > + };
> > > diff --git a/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
> > > new file mode 100644
> > > index 000000000000..0e5ee8decc0d
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
> > > @@ -0,0 +1,35 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/reset/delta,tn48m-reset.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Delta Networks TN48M CPLD reset controller
> > > +
> > > +maintainers:
> > > + - Robert Marko <robert.marko@...tura.hr>
> > > +
> > > +description: |
> > > + This module is part of the Delta TN48M multi-function device. For more
> > > + details see ../mfd/delta,tn48m-cpld.yaml.
> > > +
> > > + Reset controller modules provides resets for the following:
> > > + * 88F7040 SoC
> > > + * 88F6820 SoC
> > > + * 98DX3265 switch MAC-s
> > > + * 88E1680 PHY-s
> > > + * 88E1512 PHY
> > > + * PoE PSE controller
> > > +
> > > +properties:
> > > + compatible:
> > > + const: delta,tn48m-reset
> > > +
> > > + "#reset-cells":
> > > + const: 1
> > > +
> > > +required:
> > > + - compatible
> > > + - "#reset-cells"
> > > +
> > > +additionalProperties: false
> > > --
> > > 2.31.1
> > >
> >
> > Are there any issues with the bindings?
>
> Yes. Primarily the GPIO function being part of the compatible. I'm
> surprised Linus W is okay with that.
I think I already explained this before, having a single compatible
won't work here.
Then there would not be anything to know whether its input or output
only as the pins
have specific purpose.
And knowing the capabilites is a requirment of the GPIO regmap driver
and the GPIO
core itself as it exposes that information in a generic manner and
driver like for the
SFP bus use that.
Maybe Linus W can chime in here as well.
>
> > The patch series is depending on this as the rest has been reviewed.
>
> The bindings have been reviewed too, you just didn't like my comments...
Sorry, I did not pick that up as after my replies there was no further
discussion.
I am really hoping that we can find a middle ground here and get this
merged as the driver code itself has been revied and ACK-ed.
Regards,
Robert
>
> Rob
--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@...tura.hr
Web: www.sartura.hr
Powered by blists - more mailing lists