| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1626868353-96475-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com>
Date: Wed, 21 Jul 2021 17:22:33 +0530
From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@...inx.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Michal Simek <michal.simek@...inx.com>,
"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, <git@...inx.com>,
<saikrishna12468@...il.com>,
Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@...inx.com>
Subject: [PATCH 4/4] arm: dts: zynq: Replace 'io-standard' with 'power-source' property
Replace 'io-standard' property with 'power-source' property in all zynq dts
files to be in sync with Zynq pinctrl driver.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@...inx.com>
---
arch/arm/boot/dts/zynq-ebaz4205.dts | 8 ++++----
arch/arm/boot/dts/zynq-microzed.dts | 2 +-
arch/arm/boot/dts/zynq-zc702.dts | 20 ++++++++++----------
arch/arm/boot/dts/zynq-zc706.dts | 18 +++++++++---------
4 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts
index b0b836aedd76..be7eae611fb7 100644
--- a/arch/arm/boot/dts/zynq-ebaz4205.dts
+++ b/arch/arm/boot/dts/zynq-ebaz4205.dts
@@ -57,7 +57,7 @@
conf {
groups = "gpio0_20_grp", "gpio0_32_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
};
@@ -75,7 +75,7 @@
conf {
groups = "sdio0_2_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
bias-disable;
};
@@ -87,7 +87,7 @@
conf-cd {
groups = "gpio0_34_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
bias-high-impedance;
bias-pull-up;
@@ -102,7 +102,7 @@
conf {
groups = "uart1_4_grp";
- io-standard = <3>;
+ power-source = <3>;
slew-rate = <0>;
};
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
index 6ed84fb15902..f44a4464943b 100644
--- a/arch/arm/boot/dts/zynq-microzed.dts
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -71,7 +71,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..cf1e1cc3d132 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -206,7 +206,7 @@
conf {
groups = "can0_9_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -229,7 +229,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -252,7 +252,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -270,7 +270,7 @@
"gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
"gpio0_13_grp", "gpio0_14_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -294,7 +294,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -307,7 +307,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -321,7 +321,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -334,7 +334,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -347,7 +347,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -370,7 +370,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 77943c16d33f..d21e3ae4ebb2 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -150,7 +150,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -173,7 +173,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -187,7 +187,7 @@
conf {
groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -211,7 +211,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -224,7 +224,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -238,7 +238,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -251,7 +251,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -264,7 +264,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -287,7 +287,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
--
2.17.1
Powered by blists - more mailing lists