lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 26 Jul 2021 07:33:58 -0700
From:   Wesley Cheng <wcheng@...eaurora.org>
To:     Felipe Balbi <balbi@...nel.org>, Ferry Toth <fntoth@...il.com>
Cc:     gregkh@...uxfoundation.org, robh+dt@...nel.org, agross@...nel.org,
        bjorn.andersson@...aro.org, frowand.list@...il.com,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        jackp@...eaurora.org, heikki.krogerus@...ux.intel.com,
        andy.shevchenko@...il.com
Subject: Re: [PATCH v10 0/6] Re-introduce TX FIFO resize for larger EP
 bursting

Hi Ferry,

On 7/25/2021 10:57 PM, Felipe Balbi wrote:
> 
> Hi,
> 
> Ferry Toth <fntoth@...il.com> writes:
>>>>> Ferry Toth <fntoth@...il.com> writes:
>>>>>>>>>> Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542
>>>>>>>>>> 2015.01.21:18.19.48
>>>>>>>>>> RIP: 0010:0x500000000
>>>>>>>>>> Code: Unable to access opcode bytes at RIP 0x4ffffffd6.
>>>>>>>>>> RSP: 0018:ffffa4d00045fc28 EFLAGS: 00010046
>>>>>>>>>> RAX: 0000000500000000 RBX: ffff8cd546aed200 RCX: 0000000000000000
>>>>>>>>>> RDX: 0000000000000000 RSI: ffff8cd547bfcae0 RDI: ffff8cd546aed200
>>>>>>>>>> RBP: ffff8cd547bfcae0 R08: 0000000000000000 R09: 0000000000000001
>>>>>>>>>> R10: ffff8cd541fd28c0 R11: 0000000000000000 R12: ffff8cd547342828
>>>>>>>>>> R13: ffff8cd546aed248 R14: 0000000000000000 R15: ffff8cd548b1d000
>>>>>>>>>> FS:  0000000000000000(0000) GS:ffff8cd57e200000(0000) knlGS:0000000000000000
>>>>>>>>>> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>>>>> CR2: 0000000500000000 CR3: 000000000311e000 CR4: 00000000001006f0
>>>>>>>>>> Call Trace:
>>>>>>>>>>       ? dwc3_remove_requests.constprop.0+0x14d/0x170
>>>>>>>>>>       ? __dwc3_gadget_ep_disable+0x7a/0x160
>>>>>>>>>>       ? dwc3_gadget_ep_disable+0x3d/0xd0
>>>>>>>>>>       ? usb_ep_disable+0x1c/0x
>>>>>>>>>>       ? u_audio_stop_capture+0x79/0x120 [u_audio]
>>>>>>>>>>       ? afunc_set_alt+0x73/0x80 [usb_f_uac2]
>>> So this is triggered by a SetInterface request...
>>>
>>>>>>>>>>       ? composite_setup+0x224/0x1b90 [libcomposite]
>>>>>>>>>>       ? __dwc3_gadget_kick_transfer+0x160/0x400
>>>>>>>>>>       ? dwc3_gadget_ep_queue+0xf3/0x1a0
>>>>>>>>>>       ? configfs_composite_setup+0x6b/0x90 [libcomposite]
>>>>>>>>>>       ? configfs_composite_setup+0x6b/0x90 [libcomposite]
>>>>>>>>>>       ? dwc3_ep0_interrupt+0x459/0xa40
>>>>>>>>>>       ? dwc3_thread_interrupt+0x8ee/0xf40
>>>>>>>>>>       ? __schedule+0x235/0x6c0
>>>>>>>>>>       ? disable_irq_nosync+0x10/0x10
>>>>>>>>>>       ? irq_thread_fn+0x1b/0x60
>>>>>>>>>>       ? irq_thread+0xc0/0x160
>>>>>>>>>>       ? irq_thread_check_affinity+0x70/0x70
>>>>>>>>>>       ? irq_forced_thread_fn+0x70/0x70
>>>>>>>>>>       ? kthread+0x122/0x140
>>>>>>>>>>       ? set_kthread_struct+0x40/0x40
>>>>>>>>>>       ? ret_from_fork+0x22/0x30
>>>>>>>>> Do you mind enabling dwc3 traces and collecting them? Trying to figure
>>>>>>>>> out how we got here.
>>>>>>>>>
>>>>>>>> I'll try if I can get the same error by booting with USB in host mode
>>>>>>>> and then switch to device mode. If so I can enable traces and collect as
>>>>>>>> you explained me before.
>>>>>>>>
>>>>>>>> I'll try before monday, as then I fly for a holiday and will not be
>>>>>>>> available before rc5.
>>>>>>> you can enable all of those with kernel cmdline :-)
>>>>>>>
>>>>>>> https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html
>>>>>>>
>>>>>>> you need ftrace_dump_on_oops=1 and also need the correct options on
>>>>>>> trace_buf_size and trace_event.
>>>>>>>
>>>>>> On Edison-Arduino I have a switch to go to device mode, after which
>>>>>> udev triggers a script configure gadgets through configfs.
>>>>>>
>>>>>> I tried to log following these instructions:
>>>>>>
>>>>>> https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs  <https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs>
>>>>>>
>>>>>> Unfortunately the kernel crashes so badly I can not get to the ` cp
>>>>>> /t/trace /root/trace.txt` line (after a while the watchdog kicks).
>>>>>>
>>>>>> What to do next?
>>>>> Pass ftrace_dump_on_oops to kernel cmdline.
>>>>>
>>>> No sure if I did this right, on oops everything is pushed to console
>>>> (115k2 serial), I hope nothing essential is lost.
>>>>
>>>> I copied the screen buffer to file see attached.
>>> Thank you, I bet it took quite a some time :-) Anyway, looking at
>>> the logs around Set Interface requests, we can track every endpoint
>>> that's disabled. I'll take a guess and assume we're failing at the last
>>> Set Interface, that means we should have something odd with ep6in, but
>>> everything looks fine in the trace output:
>>>
>>> [   75.823107] irq/14-d-596       0d... 42789194us : dwc3_gadget_ep_enable: ep6in: mps 192/346 streams 16 burst 0 ring 0/0 flags E:swbp:<
>>> [   75.835472] irq/14-d-596       0d... 42789198us : dwc3_alloc_request: ep6in: req 0000000002c71409 length 0/0 zsI ==> 0
>>> [   75.846416] irq/14-d-596       0d... 42789202us : dwc3_ep_queue: ep6in: req 0000000002c71409 length 0/192 zsI ==> -115
>>> [   75.857360] irq/14-d-596       0d... 42789204us : dwc3_alloc_request: ep6in: req 00000000a324f5d0 length 0/0 zsI ==> 0
>>> [   75.868301] irq/14-d-596       0d... 42789206us : dwc3_ep_queue: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -115
>>> [   75.879244] irq/14-d-596       0d... 42789209us : dwc3_event: event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
>>> [   75.891880] irq/14-d-596       0d... 42789211us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c33 (HLcs:SC:status2)
>>> [   75.989131] irq/14-d-596       0d... 42789224us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>> [   76.096261] irq/14-d-596       0d... 42789272us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
>>> [   76.107834] irq/14-d-596       0d... 42789275us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c32 (hLcs:SC:status2)
>>> [   76.122944] irq/14-d-596       0d... 42789277us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 0/0 zsI ==> 0
>>> [   76.134160] irq/14-d-596       0d... 42789280us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 8 ctrl 00000c23 (HLcs:SC:setup)
>>> [   76.231322] irq/14-d-596       0d... 42789292us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>> [   76.297418] kworker/-23        0d... 42789670us : dwc3_ep_queue: ep3in: req 0000000029586135 length 0/96 ZsI ==> -115
>>> [   76.308278] kworker/-23        0d... 42789695us : dwc3_prepare_trb: ep3in: trb 00000000b81213d6 (E1:D0) buf 0000000003b7a800 size 96 ctrl 00000811 (Hlcs:sC:normal)
>>> [   76.395294] kworker/-23        0d... 42789707us : dwc3_gadget_ep_cmd: ep3in: cmd 'Update Transfer' [60007] params 00000000 00000000 00000000 --> status: Successful
>>> [   76.471900] irq/14-d-596       0d... 42789842us : dwc3_event: event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
>>> [   76.489308] irq/14-d-596       0d... 42789845us : dwc3_ctrl_req: Set Interface(Intf = 5, Alt.Setting = 0)
>>> [   76.505650] irq/14-d-596       0d... 42789851us : dwc3_ep_dequeue: ep6in: req 0000000002c71409 length 0/192 zsI ==> -115
>>> [   76.523315] irq/14-d-596       0d... 42789854us : dwc3_gadget_giveback: ep6in: req 0000000002c71409 length 0/192 zsI ==> -104
>>> [   76.541427] irq/14-d-596       0d... 42789857us : dwc3_free_request: ep6in: req 0000000002c71409 length 0/192 zsI ==> -104
>>> [   76.559267] irq/14-d-596       0d... 42789859us : dwc3_ep_dequeue: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -115
>>> [   76.576937] irq/14-d-596       0d... 42789861us : dwc3_gadget_giveback: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -104
>>> [   76.595046] irq/14-d-596       0d... 42789862us : dwc3_free_request: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -104
>>> [   76.612892] irq/14-d-596       0d... 42789865us : dwc3_gadget_ep_disable: ep6in: mps 192/346 streams 16 burst 0 ring 0/0 flags E:swbp:<
>>> [   76.665535] irq/14-d-596       0d... 42789873us : dwc3_event: event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
>>> [   76.684716] irq/14-d-596       0d... 42789875us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c33 (HLcs:SC:status2)
>>> [   76.819195] irq/14-d-596       0d... 42789886us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>> [   76.926324] irq/14-d-596       0d... 42789930us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
>>> [   76.937892] irq/14-d-596       0d... 42789933us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c32 (hLcs:SC:status2)
>>> [   76.953003] irq/14-d-596       0d... 42789935us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 0/0 zsI ==> 0
>>> [   76.964217] irq/14-d-596       0d... 42789938us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 8 ctrl 00000c23 (HLcs:SC:setup)
>>> [   77.061379] irq/14-d-596       0d... 42789950us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>> [   77.168595] irq/14-d-596       0d... 42790509us : dwc3_event: event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
>>> [   77.180159] irq/14-d-596       0d... 42790512us : dwc3_ctrl_req: Get String Descriptor(Index = 18, Length = 255)
>>> [   77.190578] irq/14-d-596       0d... 42790537us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 0000000003b68000 size 36 ctrl 00000c53 (HLcs:SC:data)
>>> [   77.287648] irq/14-d-596       0d... 42790550us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>> [   77.333107] irq/14-d-596       0d... 42790557us : dwc3_event: event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
>>> [   77.407223] irq/14-d-596       0d... 42790575us : dwc3_event: event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
>>> [   77.480985] irq/14-d-596       0d... 42790588us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
>>> [   77.492376] irq/14-d-596       0d... 42790590us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 0000000003b68000 size 0 ctrl 00000c52 (hLcs:SC:data)
>>> [   77.507221] irq/14-d-596       0d... 42790595us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 36/36 ZsI ==> 0
>>> [   77.518609] irq/14-d-596       0d... 42790597us : dwc3_event: event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
>>> [   77.531332] irq/14-d-596       0d... 42790598us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c43 (HLcs:SC:status3)
>>> [   77.628669] irq/14-d-596       0d... 42790609us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>>
>>> Do you mind adding a few prints in dwc3_remove_requests to tell us which
>>> endpoint is being processed? Then we'll know for sure which one caused
>>> the crash.
>>>
>> I wouldn't mind but am leaving on a holiday, won't have time until 6 aug.
> 
> not a problem, we'll still be here when you're back :-)
> 
>> But as I am using configfs (excerpt follows) and just disabling the
>> last 2 line resolves the issue, I'm guessing uac2 is the issue. Or
>> exceeding the available resources.
>>
>> # Create directory structure
>> mkdir "${GADGET_BASE_DIR}"
>> cd "${GADGET_BASE_DIR}"
>> mkdir -p configs/c.1/strings/0x409
>> mkdir -p strings/0x409
>>
>> # Serial device
>> mkdir functions/gser.usb0
>> ln -s functions/gser.usb0 configs/c.1/
>> ###
>>
>> # Ethernet device
>> mkdir functions/eem.usb0
>> echo "${DEV_ETH_ADDR}" > functions/eem.usb0/dev_addr
>> echo "${HOST_ETH_ADDR}" > functions/eem.usb0/host_addr
>> ln -s functions/eem.usb0 configs/c.1/
>>
>> # Mass Storage device
>> mkdir functions/mass_storage.usb0
>> echo 1 > functions/mass_storage.usb0/stall
>> echo 0 > functions/mass_storage.usb0/lun.0/cdrom
>> echo 0 > functions/mass_storage.usb0/lun.0/ro
>> echo 0 > functions/mass_storage.usb0/lun.0/nofua
>> echo "${USBDISK}" > functions/mass_storage.usb0/lun.0/file
>> ln -s functions/mass_storage.usb0 configs/c.1/
>>
>> # UAC2 device
>> mkdir functions/uac2.usb0
>> ln -s functions/uac2.usb0 configs/c.1
> 
> Right, either there's an actual bug in uac2, or we're running out of
> FIFO space.
> 

Are you enabling the TXFIFO flag here again?  If we suspect that we're
running out of FIFO space, then:
- First, making sure we're explicitly enabling the TXFIFO resize flag.
- Second, we should see the same warning we saw previously:
	dwc3 dwc3.0.auto: Fifosize(2154) > RAM size(2022) ep5in
depth:115540359


Thanks
Wesley Cheng

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ