| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YQg5bjYwCCZQ7bR9@robh.at.kernel.org>
Date: Mon, 2 Aug 2021 12:29:02 -0600
From: Rob Herring <robh@...nel.org>
To: Hsin-Yi Wang <hsinyi@...omium.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Enric Balletbo Serra <eballetbo@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...nel.org>,
Andy Teng <andy.teng@...iatek.com>, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/3] dt-bindings: mediatek: convert pinctrl to yaml
On Fri, Jul 30, 2021 at 08:09:37PM +0800, Hsin-Yi Wang wrote:
> Convert mt65xx, mt6796, mt7622, mt8183 bindings to yaml.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
> ---
> v1->v2:
> - fix comments in v1.
> - fix mt7622 where groups is not required for conf node.
> ---
> .../pinctrl/mediatek,mt65xx-pinctrl.yaml | 206 ++++++++
> .../pinctrl/mediatek,mt6797-pinctrl.yaml | 173 +++++++
> .../pinctrl/mediatek,mt7622-pinctrl.yaml | 416 +++++++++++++++
> .../pinctrl/mediatek,mt8183-pinctrl.yaml | 228 ++++++++
> .../bindings/pinctrl/pinctrl-mt65xx.txt | 156 ------
> .../bindings/pinctrl/pinctrl-mt6797.txt | 83 ---
> .../bindings/pinctrl/pinctrl-mt7622.txt | 490 ------------------
> .../bindings/pinctrl/pinctrl-mt8183.txt | 132 -----
> 8 files changed, 1023 insertions(+), 861 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> new file mode 100644
> index 0000000000000..f76c2c9cabe25
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> @@ -0,0 +1,206 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT65xx Pin Controller Device Tree Bindings
> +
> +maintainers:
> + - Andy Teng <andy.teng@...iatek.com>
> +
> +description: |+
> + The Mediatek's Pin controller is used to control SoC pins.
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt2701-pinctrl
> + - mediatek,mt2712-pinctrl
> + - mediatek,mt6397-pinctrl
> + - mediatek,mt7623-pinctrl
> + - mediatek,mt8127-pinctrl
> + - mediatek,mt8135-pinctrl
> + - mediatek,mt8167-pinctrl
> + - mediatek,mt8173-pinctrl
> + - mediatek,mt8516-pinctrl
> +
> + reg:
> + maxItems: 1
> +
> + pins-are-numbered:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + Specify the subnodes are using numbered pinmux to specify pins.
> +
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> + description: |
> + Number of cells in GPIO specifier. Since the generic GPIO
> + binding is used, the amount of cells must be specified as 2. See the below
> + mentioned gpio binding representation for description of particular cells.
> +
> + mediatek,pctl-regmap:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + minItems: 1
> + maxItems: 2
> + description: |
> + Should be phandles of the syscfg node.
> +
> + interrupt-controller: true
> +
> + interrupts:
> + minItems: 1
> + maxItems: 3
> +
> + "#interrupt-cells":
> + const: 2
> +
> +required:
> + - compatible
> + - pins-are-numbered
> + - gpio-controller
> + - "#gpio-cells"
> +
> +patternProperties:
> + '-[0-9]+$':
> + type: object
additionalProperties: false
That's going to cause validation failures as the pattern below doesn't
match 'pins1' or 'pins'.
> + patternProperties:
> + '-pins':
> + type: object
I recommend moving the 'additionalProperties' below to here. Easier to
follow the indentation.
Same issues on the rest of the schemas.
> + description: |
> + A pinctrl node should contain at least one subnodes representing the
> + pinctrl groups available on the machine. Each subnode will list the
> + pins it needs, and how they should be configured, with regard to muxer
> + configuration, pullups, drive strength, input enable/disable and input
> + schmitt.
> + $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> + properties:
> + pinmux:
> + description:
> + integer array, represents gpio pin number and mux setting.
> + Supported pin number and mux varies for different SoCs, and are
> + defined as macros in <soc>-pinfunc.h directly.
> +
> + bias-disable: true
> +
> + bias-pull-up:
> + description: |
> + Besides generic pinconfig options, it can be used as the pull up
> + settings for 2 pull resistors, R0 and R1. User can configure those
> + special pins. Some macros have been defined for this usage, such
> + as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
> + valid arguments.
> +
> + bias-pull-down: true
> +
> + input-enable: true
> +
> + input-disable: true
> +
> + output-low: true
> +
> + output-high: true
> +
> + input-schmitt-enable: true
> +
> + input-schmitt-disable: true
> +
> + drive-strength:
> + description: |
> + Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
> + etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
> +
> + required:
> + - pinmux
> +
> + additionalProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + syscfg_pctl_a: syscfg-pctl-a@...05000 {
> + compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
> + reg = <0 0x10005000 0 0x1000>;
> + };
> +
> + syscfg_pctl_b: syscfg-pctl-b@...0c020 {
> + compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
> + reg = <0 0x1020C020 0 0x1000>;
> + };
> +
> + pinctrl@...0800 {
> + compatible = "mediatek,mt8135-pinctrl";
> + reg = <0 0x1000B000 0 0x1000>;
> + mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
> + pins-are-numbered;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> +
> + i2c0_pins_a: i2c0-0 {
> + pins1 {
> + pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
> + <MT8135_PIN_101_SCL0__FUNC_SCL0>;
> + bias-disable;
> + };
> + };
> +
> + i2c1_pins_a: i2c1-0 {
> + pins {
> + pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
> + <MT8135_PIN_196_SCL1__FUNC_SCL1>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + i2c2_pins_a: i2c2-0 {
> + pins1 {
> + pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
> + bias-pull-down;
> + };
> +
> + pins2 {
> + pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
> + bias-pull-up;
> + };
> + };
> +
> + i2c3_pins_a: i2c3-0 {
> + pins1 {
> + pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
> + <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins2 {
> + pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
> + <MT8135_PIN_36_SDA3__FUNC_SDA3>;
> + output-low;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins3 {
> + pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
> + <MT8135_PIN_60_JTDI__FUNC_JTDI>;
> + drive-strength = <32>;
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
> new file mode 100644
> index 0000000000000..55e47c1e42f6c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
> @@ -0,0 +1,173 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6797 Pin Controller Device Tree Bindings
> +
> +maintainers:
> + - Andy Teng <andy.teng@...iatek.com>
> +
> +description: |+
> + The MediaTek's MT6797 Pin controller is used to control SoC pins.
> +
> +properties:
> + compatible:
> + const: mediatek,mt6797-pinctrl
> +
> + reg:
> + minItems: 5
> + maxItems: 5
> +
> + reg-names:
> + items:
> + - const: gpio
> + - const: iocfgl
> + - const: iocfgb
> + - const: iocfgr
> + - const: iocfgt
> +
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> + description: |
> + Number of cells in GPIO specifier. Since the generic GPIO
> + binding is used, the amount of cells must be specified as 2. See the below
> + mentioned gpio binding representation for description of particular cells.
> +
> + interrupt-controller: true
> +
> + interrupts:
> + maxItems: 1
> +
> + "#interrupt-cells":
> + const: 2
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - gpio-controller
> + - "#gpio-cells"
> +
> +patternProperties:
> + '-[0-9]+$':
> + type: object
> + patternProperties:
> + '-pins':
> + type: object
> + description: |
> + A pinctrl node should contain at least one subnodes representing the
> + pinctrl groups available on the machine. Each subnode will list the
> + pins it needs, and how they should be configured, with regard to muxer
> + configuration, pullups, drive strength, input enable/disable and input
> + schmitt.
> + $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> + properties:
> + pinmux:
> + description:
> + integer array, represents gpio pin number and mux setting.
> + Supported pin number and mux varies for different SoCs, and are
> + defined as macros in <soc>-pinfunc.h directly.
> +
> + bias-disable: true
> +
> + bias-pull-up: true
> +
> + bias-pull-down: true
> +
> + input-enable: true
> +
> + input-disable: true
> +
> + output-enable: true
> +
> + output-low: true
> +
> + output-high: true
> +
> + input-schmitt-enable: true
> +
> + input-schmitt-disable: true
> +
> + drive-strength:
> + enum: [2, 4, 8, 12, 16]
> +
> + slew-rate:
> + enum: [0, 1]
> +
> + mediatek,pull-up-adv:
> + description: |
> + Pull up setings for 2 pull resistors, R0 and R1. User can
> + configure those special pins. Valid arguments are described as below:
> + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> + mediatek,pull-down-adv:
> + description: |
> + Pull down settings for 2 pull resistors, R0 and R1. User can
> + configure those special pins. Valid arguments are described as below:
> + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> + mediatek,tdsel:
> + description: |
> + An integer describing the steps for output level shifter duty
> + cycle when asserted (high pulse width adjustment). Valid arguments
> + are from 0 to 15.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + mediatek,rdsel:
> + description: |
> + An integer describing the steps for input level shifter duty cycle
> + when asserted (high pulse width adjustment). Valid arguments are
> + from 0 to 63.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + required:
> + - pinmux
> +
> + additionalProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/mt6797-pinfunc.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pio: pinctrl@...05000 {
> + compatible = "mediatek,mt6797-pinctrl";
> + reg = <0 0x10005000 0 0x1000>,
> + <0 0x10002000 0 0x400>,
> + <0 0x10002400 0 0x400>,
> + <0 0x10002800 0 0x400>,
> + <0 0x10002C00 0 0x400>;
> + reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + uart_pins_a: uart-0 {
> + pins1 {
> + pinmux = <MT6797_GPIO232__FUNC_URXD1>,
> + <MT6797_GPIO233__FUNC_UTXD1>;
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
> new file mode 100644
> index 0000000000000..a01c81895fb95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
> @@ -0,0 +1,416 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT7622 Pin Controller Device Tree Bindings
> +
> +maintainers:
> + - Andy Teng <andy.teng@...iatek.com>
> +
> +description: |+
> + The MediaTek's MT7622 Pin controller is used to control SoC pins.
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt7622-pinctrl
> + - mediatek,mt7629-pinctrl
> +
> + reg:
> + maxItems: 1
> +
> + reg-names:
> + items:
> + - const: eint
> +
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> + description: |
> + Number of cells in GPIO specifier. Since the generic GPIO
> + binding is used, the amount of cells must be specified as 2. See the below
> + mentioned gpio binding representation for description of particular cells.
> +
> + interrupt-controller: true
> +
> + interrupts:
> + maxItems: 1
> +
> + "#interrupt-cells":
> + const: 2
> +
> +required:
> + - compatible
> + - reg
> + - gpio-controller
> + - "#gpio-cells"
> +
> +if:
> + required:
> + - interrupt-controller
> +then:
> + required:
> + - reg-names
> + - interrupts
> + - "#interrupt-cells"
> +
> +patternProperties:
> + '-[0-9]+$':
> + type: object
> + patternProperties:
> + 'mux':
> + type: object
> + description: |
> + pinmux configuration nodes.
> + $ref: "/schemas/pinctrl/pinmux-node.yaml"
> + properties:
> + function:
> + description: |
> + A string containing the name of the function to mux to the group.
> + enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
> + spi, tdm, uart, watchdog, wifi]
> +
> + groups:
> + description: |
> + An array of strings. Each string contains the name of a group.
> + enum: [emmc, emmc_rst, esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
> + rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio, i2c0, i2c1_0,
> + i2c1_1, i2c1_2, i2c2_0, i2c2_1, i2c2_2, i2s_in_mclk_bclk_ws,
> + i2s1_in_data, i2s2_in_data, i2s3_in_data, i2s4_in_data,
> + i2s_out_mclk_bclk_ws, i2s1_out_data, i2s2_out_data,
> + i2s3_out_data, i2s4_out_data, ir_0_tx, ir_1_tx, ir_2_tx,
> + ir_0_rx, ir_1_rx, ir_2_rx, ephy_leds, ephy0_led, ephy1_led,
> + ephy2_led, ephy3_led, ephy4_led, wled, par_nand, snfi,
> + spi_nor, pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
> + pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
> + pcie0_pad_perst, pcie1_pad_perst, pmic_bus, pwm_ch1_0,
> + pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1, pwm_ch2_2,
> + pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0, pwm_ch4_1,
> + pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1, pwm_ch5_2,
> + pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3, pwm_ch7_0,
> + pwm_ch7_1, pwm_ch7_2, sd_0, sd_1, spic0_0, spic0_1, spic1_0,
> + spic1_1, spic2_0_wp_hold, spic2_0, tdm_0_out_mclk_bclk_ws,
> + tdm_0_in_mclk_bclk_ws, tdm_0_out_data, tdm_0_in_data,
> + tdm_1_out_mclk_bclk_ws, tdm_1_in_mclk_bclk_ws,
> + tdm_1_out_data, tdm_1_in_data, uart0_0_tx_rx, uart1_0_tx_rx,
> + uart1_0_rts_cts, uart1_1_tx_rx, uart1_1_rts_cts,
> + uart2_0_tx_rx, uart2_0_rts_cts, uart2_1_tx_rx,
> + uart2_1_rts_cts, uart2_2_tx_rx, uart2_2_rts_cts,
> + uart2_3_tx_rx, uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
> + uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts, uart4_2_tx_rx,
> + uart4_2_rts_cts, watchdog, i2c_0, i2c_1, wf2g_led, wf5g_led,
> + pcie_pereset, pcie_wake, pcie_clkreq, pwm_0, pwm_1, spi_0,
> + spi_1, spi_wp, spi_hold, uart0_txd_rxd, uart1_0_txd_rxd,
> + uart1_0_cts_rts, uart1_1_txd_rxd, uart1_1_cts_rts,
> + uart2_0_txd_rxd, uart2_0_cts_rts, uart2_1_txd_rxd,
> + uart2_1_cts_rts, wf0_2g, wf0_5g]
You are listing the same strings twice. So I'd drop this one and leave
the if/then schemas below. (Though just the above is good enough.)
> +
> + required:
> + - groups
> + - function
> +
> + allOf:
> + - if:
> + properties:
> + functions:
function or functions?
> + contains:
> + const: emmc
It's only a single string entry, right? So drop 'contains'
> + then:
> + properties:
> + groups:
> + enum: [emmc, emmc_rst]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: eth
> + then:
> + properties:
> + groups:
> + enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
> + rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: i2c
> + then:
> + properties:
> + groups:
> + enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
> + i2c2_1, i2c2_2]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: i2s
> + then:
> + properties:
> + groups:
> + enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
> + i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
> + i2s1_out_data, i2s2_out_data, i2s3_out_data,
> + i2s4_out_data]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: ir
> + then:
> + properties:
> + groups:
> + enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: led
> + then:
> + properties:
> + groups:
> + enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
> + ephy4_led, wled, wf2g_led, wf5g_led]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: flash
> + then:
> + properties:
> + groups:
> + enum: [par_nand, snfi, spi_nor]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: pcie
> + then:
> + properties:
> + groups:
> + enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
> + pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
> + pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
> + pcie_wake, pcie_clkreq]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: pmic
> + then:
> + properties:
> + groups:
> + enum: [pmic_bus]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: pwm
> + then:
> + properties:
> + groups:
> + enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
> + pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
> + pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
> + pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
> + pwm_ch7_0, pwm_0, pwm_1]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: sd
> + then:
> + properties:
> + groups:
> + enum: [sd_0, sd_1]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: spi
> + then:
> + properties:
> + groups:
> + enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
> + spic2_0, spi_0, spi_1, spi_wp, spi_hold]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: tdm
> + then:
> + properties:
> + groups:
> + enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
> + tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
> + tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: uart
> + then:
> + properties:
> + groups:
> + enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
> + uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
> + uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
> + uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
> + uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
> + uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
> + uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
> + uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
> + uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
> + uart2_1_txd_rxd, uart2_1_cts_rts]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: watchdog
> + then:
> + properties:
> + groups:
> + enum: [watchdog]
> + - if:
> + properties:
> + functions:
> + contains:
> + const: wifi
> + then:
> + properties:
> + groups:
> + enum: [wf0_2g, wf0_5g]
> +
> + 'conf':
> + type: object
> + description: |
> + pinconf configuration nodes.
> + $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> + properties:
> + groups:
> + description: |
> + An array of strings. Each string contains the name of a group.
> + Valid values are the same as the pinmux node.
> +
> + pins:
> + description: |
> + An array of strings. Each string contains the name of a pin.
> + enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
> + RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
> + I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
> + I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
> + G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
> + G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
> + NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
> + MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
> + MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
> + MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
> + MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
> + PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
> + GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
> + PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
> + AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
> + PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
> + WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
> + WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
> + EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
> + EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
> + WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
> + UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
> + UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
> + PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
> + GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
> + TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
> + WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
> +
> + bias-disable: true
> +
> + bias-pull-up: true
> +
> + bias-pull-down: true
> +
> + input-enable: true
> +
> + input-disable: true
> +
> + output-enable: true
> +
> + output-low: true
> +
> + output-high: true
> +
> + input-schmitt-enable: true
> +
> + input-schmitt-disable: true
> +
> + drive-strength:
> + enum: [4, 8, 12, 16]
> +
> + slew-rate:
> + enum: [0, 1]
> +
> + mediatek,tdsel:
> + description: |
> + An integer describing the steps for output level shifter duty
> + cycle when asserted (high pulse width adjustment). Valid arguments
> + are from 0 to 15.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + mediatek,rdsel:
> + description: |
> + An integer describing the steps for input level shifter duty cycle
> + when asserted (high pulse width adjustment). Valid arguments are
> + from 0 to 63.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + required:
> + - pins
> +
> + additionalProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pio: pinctrl@...11000 {
> + compatible = "mediatek,mt7622-pinctrl";
> + reg = <0 0x10211000 0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + pinctrl_eth_default: eth-0 {
> + mux-mdio {
> + groups = "mdc_mdio";
> + function = "eth";
> + drive-strength = <12>;
> + };
> +
> + mux-gmac2 {
> + groups = "rgmii_via_gmac2";
> + function = "eth";
> + drive-strength = <12>;
> + };
> +
> + mux-esw {
> + groups = "esw";
> + function = "eth";
> + drive-strength = <8>;
> + };
> +
> + conf-mdio {
> + pins = "MDC";
> + bias-pull-up;
> + };
> + };
> + };
> + };
Powered by blists - more mailing lists