[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4e9d536cb6a7cffb829f105183f2bb5bceb4122c.camel@linux.intel.com>
Date: Wed, 04 Aug 2021 16:14:57 -0700
From: Tedd Ho-Jeong An <tedd.an@...ux.intel.com>
To: Marcel Holtmann <marcel@...tmann.org>,
"\"Mark-YW Chen" (陳揚文)"
<Mark-YW.Chen@...iatek.com>
Cc: Johan Hedberg <johan.hedberg@...il.com>, chris.lu@...iatek.com,
will-cy.lee@...iatek.com, Sean Wang <sean.wang@...iatek.com>,
BlueZ <linux-bluetooth@...r.kernel.org>,
linux-mediatek@...ts.infradead.org,
open list <linux-kernel@...r.kernel.org>,
Michael Sun <michaelfsun@...gle.com>, shawnku@...gle.com,
jemele@...gle.com, apusaka@...gle.com, mcchou@...omium.org
Subject: Re: [PATCH v5 1/2] Bluetooth: btusb: Record debug log for Mediatek
Chip.
Hi Mark,
I cannot find the original patch email and CI report, however this patch throws this warning.
drivers/bluetooth/btusb.c: In function ‘btusb_recv_acl_mtk’:
drivers/bluetooth/btusb.c:4033:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
4033 | usb_disable_autosuspend(data->udev);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btusb.c:4034:2: note: here
4034 | case 0x05ff: /* Firmware debug logging 1 */
| ^~~~
Regards,
Tedd
On Wed, 2021-08-04 at 16:48 +0200, Marcel Holtmann wrote:
> Hi Mark,
>
> > Mediatek Bluetooth controller sends the FW log and FW dump via EP2.
> > This patch creates an MTK specified callback(btusb_recv_acl_mtk) to
> > replace the original one (hci_recv_frame) when an MTK controller is
> > detected. The new callback will separate the firmware dump traffics
> > from the ACL data to have them process separately.
> >
> > 1. Add a new field (recv_acl) to the btusb_data struct to store
> > vendor-specific ACL callback handler.
> > 2. Add the MTK-specific ACL callback handler (btusb_recv_acl_mtk) to
> > process ACL data, debug log, and firmware dump.
> > 3. The debug log traces LMP/LL events and connection quality reports.
> > 4. The upper layer can use hci_channel_monitor to receive these
> > packets.
> >
> > Example btmon: firmware debug log.
> > 1. Enable firmware debug log.
> > < HCI Command: Vendor (0x3f|0x005d) plen 4
> > 00 00 02 02 ....
> > > HCI Event: Command Complete (0x0e) plen 8
> > Vendor (0x3f|0x005d) ncmd 1
> > Status: Success (0x00)
> > 00 00 02 02 ....
> > 2. Diagnostic packet from controller
> > = Vendor Diagnostic (len 500)
> > ff 05 f0 01 fd ff 02 0e 08 01 5d fc 00 00 00 02
> > 02 aa aa aa cb e3 f0 15 b0 0c 5f 01 00 d1 0f 33
> > 01 7f 00 08 57 61 0c 00 00 00 00 00 23 37 17 00
> > fd ff 00 00 29 60 ff ff b1 56 e8 00 57 40 0a 40
> > 39 95 f2 00 47 40 43 00 fc f0 16 00 57 61 0c 00
> > 00 00 00 00 23 37 17 00 fd ff 00 00 29 60 ff ff
> > 65 95 f2 00 57 40 0a 40 ec d3 fc 00 47 40 3b 00
> > 2c f1 17 00 57 61 0c 00 00 00 00 00 23 37 17 00
> > fd ff 00 00 29 60 ff ff 19 d4 fc 00 57 40 76 1c
> > b2 61 01 01 47 40 b3 04 0b 63 18 00 fe ff 02 01
> > 04 05 33 8b 9e 08 00 aa aa aa aa aa 27 38 01 02
> > 01 00 00 00 02 e0 10 00 20 00 20 00 2a 08 40 00
> > 20 00 20 08 2a 08 02 00 40 00 00 01 2e 08 40 00
> > 01 67 b0 c2 2e 08 3e 07 ff ff ff ff 40 08 01 00
> > 02 00 00 00 34 08 a3 00 00 00 00 00 34 08 a3 00
> > 00 00 00 00 35 08 45 01 00 00 00 00 2e 08 40 00
> > 01 67 b0 c2 30 35 01 02 00 00 00 00 2c 31 01 00
> > 02 00 00 40 2d 19 03 00 00 40 00 00 fd ff 02 0f
> > 04 00 01 01 04 aa aa aa aa aa aa aa 57 61 0c 00
> > 00 00 00 00 23 46 32 00 01 00 00 00 2f 35 00 02
> > 00 00 00 00 29 35 ff 02 00 22 00 00 2d 31 a6 02
> > 02 00 00 00 31 6c 40 00 14 63 18 1b 31 6c 40 00
> > 14 63 18 23 51 08 53 00 12 63 18 00 2c 35 12 01
> > fe 00 00 00 2b 35 fe 02 02 00 00 00 2f 31 21 00
> > 00 00 02 00 75 61 01 00 4c 1b 93 00 79 61 01 00
> > 00 00 00 00 12 e3 63 18 20 31 86 01 74 61 68 03
> > 00 00 04 00 a1 73 ff 00 b9 01 00 00 a1 73 04 00
> > 00 00 00 00 a1 73 00 00 00 00 00 00 a1 73 00 00
> > 02 00 00 00 31 6c 40 00 16 63 18 0c 31 6c 40 00
> > 16 63 18 1c 77 61 40 00 48 33 40 00 14 e3 63 18
> > 40 31 86 01 00 d1 02 c5 07 23 a1 34 73 61 37 02
> > 02 00 00 a1
> >
> > Signed-off-by: mark-yw.chen <mark-yw.chen@...iatek.com>
> > Reviewed-by: Michael Sun <michaelfsun@...gle.com>
> > Reviewed-by: Archie Pusaka <apusaka@...omium.org>
> > ---
> > drivers/bluetooth/btusb.c | 25 ++++++++++++++++++++++++-
> > 1 file changed, 24 insertions(+), 1 deletion(-)
>
> patch has been applied to bluetooth-next tree.
>
> Regards
>
> Marcel
>
Powered by blists - more mailing lists