| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFp0O-N79QzHtoaC0+yWvYbTy1mGCjn7wivLvFvJ7_oNiA@mail.gmail.com>
Date: Wed, 4 Aug 2021 13:34:52 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Shaik Sajida Bhanu <sbhanu@...eaurora.org>
Cc: Adrian Hunter <adrian.hunter@...el.com>,
Asutosh Das <asutoshd@...eaurora.org>,
Sahitya Tummala <stummala@...eaurora.org>,
Veerabhadrarao Badiganti <vbadigan@...eaurora.org>,
Ram Prakash Gupta <rampraka@...eaurora.org>,
Sayali Lokhande <sayalil@...eaurora.org>,
Sarthak Garg <sartgarg@...eaurora.org>,
Rajendra Nayak <rnayak@...eaurora.org>, cang@...eaurora.org,
Pradeep P V K <pragalla@...eaurora.org>,
nitirawa@...eaurora.org, linux-mmc <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Stephen Boyd <swboyd@...omium.org>
Subject: Re: [PATCH V4] mmc: sdhci-msm: Update the software timeout value for sdhc
+ Stephen
On Mon, 2 Aug 2021 at 12:41, <sbhanu@...eaurora.org> wrote:
>
> Gentle Reminder
>
> Thanks,
> Sajida
>
> On 2021-07-16 17:16, Shaik Sajida Bhanu wrote:
> > Whenever SDHC run at clock rate 50MHZ or below, the hardware data
> > timeout value will be 21.47secs, which is approx. 22secs and we have
> > a current software timeout value as 10secs. We have to set software
> > timeout value more than the hardware data timeout value to avioid
> > seeing
> > the below register dumps.
> >
> > [ 332.953670] mmc2: Timeout waiting for hardware interrupt.
> > [ 332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP
> > ===========
> > [ 332.966450] mmc2: sdhci: Sys addr: 0x00000000 | Version:
> > 0x00007202
> > [ 332.973256] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt:
> > 0x00000001
> > [ 332.980054] mmc2: sdhci: Argument: 0x00000000 | Trn mode:
> > 0x00000027
> > [ 332.986864] mmc2: sdhci: Present: 0x01f801f6 | Host ctl:
> > 0x0000001f
> > [ 332.993671] mmc2: sdhci: Power: 0x00000001 | Blk gap:
> > 0x00000000
> > [ 333.000583] mmc2: sdhci: Wake-up: 0x00000000 | Clock:
> > 0x00000007
> > [ 333.007386] mmc2: sdhci: Timeout: 0x0000000e | Int stat:
> > 0x00000000
> > [ 333.014182] mmc2: sdhci: Int enab: 0x03ff100b | Sig enab:
> > 0x03ff100b
> > [ 333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int:
> > 0x00000000
> > [ 333.027771] mmc2: sdhci: Caps: 0x322dc8b2 | Caps_1:
> > 0x0000808f
> > [ 333.034561] mmc2: sdhci: Cmd: 0x0000183a | Max curr:
> > 0x00000000
> > [ 333.041359] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]:
> > 0x00000000
> > [ 333.048157] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]:
> > 0x00000000
> > [ 333.054945] mmc2: sdhci: Host ctl2: 0x00000000
> > [ 333.059657] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr:
> > 0x0000000ffffff218
> > [ 333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
> > -----------
> > [ 333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
> > 0x6000642c | DLL cfg2: 0x0020a000
> > [ 333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
> > 0x00000000 | DDR cfg: 0x80040873
> > [ 333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
> > 0xf88218a8 Vndr func3: 0x02626040
> > [ 333.102371] mmc2: sdhci:
> > ============================================
> >
> > So, set software timeout value more than hardware timeout value.
> >
> > Signed-off-by: Shaik Sajida Bhanu <sbhanu@...eaurora.org>
> > Acked-by: Adrian Hunter <adrian.hunter@...el.com>
Applied for fixes and by adding a stable tag, thanks!
Kind regards
Uffe
> > ---
> >
> > Changes since V3:
> > - Addressed minor comments from Adrain Hunter and retained his
> > Acked-by Signed-off.
> >
> > Changes since V2:
> > - Updated 22 with 22LL to avoid compiler warning as
> > suggested by Adrian Hunter.
> > - Added a check to update software data timeout value if its value
> > is less than the calculated hardware data timeout value as suggested
> > by Veerabhadrarao Badiganti.
> > Changes since V1:
> > - Moved software data timeout update part to qcom specific file
> > as suggested by Veerabhadrarao Badiganti.
> > ---
> > drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++
> > 1 file changed, 18 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-msm.c
> > b/drivers/mmc/host/sdhci-msm.c
> > index e44b7a6..290a14c 100644
> > --- a/drivers/mmc/host/sdhci-msm.c
> > +++ b/drivers/mmc/host/sdhci-msm.c
> > @@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct
> > mmc_host *mmc, bool recovery)
> > sdhci_cqe_disable(mmc, recovery);
> > }
> >
> > +static void sdhci_msm_set_timeout(struct sdhci_host *host, struct
> > mmc_command *cmd)
> > +{
> > + u32 count, start = 15;
> > +
> > + __sdhci_set_timeout(host, cmd);
> > + count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL);
> > + /*
> > + * Update software timeout value if its value is less than hardware
> > data
> > + * timeout value. Qcom SoC hardware data timeout value was calculated
> > + * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock.
> > + */
> > + if (cmd && cmd->data && host->clock > 400000 &&
> > + host->clock <= 50000000 &&
> > + ((1 << (count + start)) > (10 * host->clock)))
> > + host->data_timeout = 22LL * NSEC_PER_SEC;
> > +}
> > +
> > static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
> > .enable = sdhci_msm_cqe_enable,
> > .disable = sdhci_msm_cqe_disable,
> > @@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
> > .irq = sdhci_msm_cqe_irq,
> > .dump_vendor_regs = sdhci_msm_dump_vendor_regs,
> > .set_power = sdhci_set_power_noreg,
> > + .set_timeout = sdhci_msm_set_timeout,
> > };
> >
> > static const struct sdhci_pltfm_data sdhci_msm_pdata = {
Powered by blists - more mailing lists