| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210810180511.8986-1-Larry.Finger@lwfinger.net>
Date: Tue, 10 Aug 2021 13:05:11 -0500
From: Larry Finger <Larry.Finger@...inger.net>
To: gregkh@...uxfoundation.org
Cc: phil@...lpotter.co.uk, linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org,
Larry Finger <Larry.Finger@...inger.net>
Subject: [PATCH v2] staging: r8188eu: Replace BITn with BIT(n)
The driver uses BITn instead of BIT(n). All such usage is converted.
Note that this patch does not address any warnings that checkpatch
will find. These include missing space around operators and lines
that are too long. These problems will be addressed in a separate
patch.
Signed-off-by: Larry Finger <Larry.Finger@...inger.net>
---
v2 - Removed dependency on incorrect patch
Fixed typo n comment noted by Dan Carpenter
---
drivers/staging/r8188eu/core/rtw_ioctl_set.c | 2 +-
drivers/staging/r8188eu/hal/HalPhyRf_8188e.c | 40 +-
drivers/staging/r8188eu/hal/odm.c | 68 +--
drivers/staging/r8188eu/hal/odm_HWConfig.c | 4 +-
drivers/staging/r8188eu/hal/odm_RTL8188E.c | 116 ++---
drivers/staging/r8188eu/hal/rtl8188e_cmd.c | 14 +-
.../staging/r8188eu/hal/rtl8188e_hal_init.c | 66 +--
drivers/staging/r8188eu/hal/rtl8188e_mp.c | 34 +-
drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 8 +-
drivers/staging/r8188eu/hal/rtl8188eu_led.c | 10 +-
drivers/staging/r8188eu/hal/usb_halinit.c | 48 +-
.../staging/r8188eu/include/Hal8188EPhyCfg.h | 14 +-
.../staging/r8188eu/include/Hal8188EPwrSeq.h | 84 ++--
drivers/staging/r8188eu/include/hal_intf.h | 16 +-
drivers/staging/r8188eu/include/odm.h | 106 ++---
drivers/staging/r8188eu/include/odm_reg.h | 2 +-
drivers/staging/r8188eu/include/odm_types.h | 8 +-
.../staging/r8188eu/include/osdep_service.h | 42 --
.../staging/r8188eu/include/rtl8188e_spec.h | 415 ++++++++----------
drivers/staging/r8188eu/include/rtw_sreset.h | 14 +-
drivers/staging/r8188eu/os_dep/ioctl_linux.c | 4 +-
21 files changed, 518 insertions(+), 597 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_ioctl_set.c b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
index 35a4a9e222e6..37e8b076be93 100644
--- a/drivers/staging/r8188eu/core/rtw_ioctl_set.c
+++ b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
@@ -564,7 +564,7 @@ u8 rtw_set_802_11_add_key(struct adapter *padapter, struct ndis_802_11_key *key)
bgroup = false;
} else {
- /* Group key - KeyIndex(BIT30 == 0) */
+ /* Group key - KeyIndex(BIT(30) == 0) */
/* when add wep key through add key and didn't assigned encryption type before */
if ((padapter->securitypriv.ndisauthtype <= 3) &&
(padapter->securitypriv.dot118021XGrpPrivacy == 0)) {
diff --git a/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c b/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
index 68e7c31cc720..643a4d348b2e 100644
--- a/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
+++ b/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
@@ -336,11 +336,11 @@ odm_TXPowerTrackingCallback_ThermalMeter_8188E(
ODM_SetBBReg(dm_odm, rOFDM0_XDTxAFE, bMaskH4Bits, value32);
value32 = ((X * ele_D)>>7)&0x01;
- ODM_SetBBReg(dm_odm, rOFDM0_ECCAThreshold, BIT28, value32);
+ ODM_SetBBReg(dm_odm, rOFDM0_ECCAThreshold, BIT(28), value32);
} else {
ODM_SetBBReg(dm_odm, rOFDM0_XBTxIQImbalance, bMaskDWord, OFDMSwingTable[(u8)OFDM_index[1]]);
ODM_SetBBReg(dm_odm, rOFDM0_XDTxAFE, bMaskH4Bits, 0x00);
- ODM_SetBBReg(dm_odm, rOFDM0_ECCAThreshold, BIT28, 0x00);
+ ODM_SetBBReg(dm_odm, rOFDM0_ECCAThreshold, BIT(28), 0x00);
}
}
}
@@ -392,7 +392,7 @@ phy_PathA_IQK_8188E(struct adapter *adapt, bool configPathB)
regE94 = ODM_GetBBReg(dm_odm, rTx_Power_Before_IQK_A, bMaskDWord);
regE9C = ODM_GetBBReg(dm_odm, rTx_Power_After_IQK_A, bMaskDWord);
- if (!(regeac & BIT28) &&
+ if (!(regeac & BIT(28)) &&
(((regE94 & 0x03FF0000)>>16) != 0x142) &&
(((regE9C & 0x03FF0000)>>16) != 0x42))
result |= 0x01;
@@ -446,7 +446,7 @@ phy_PathA_RxIQK(struct adapter *adapt, bool configPathB)
regE94 = ODM_GetBBReg(dm_odm, rTx_Power_Before_IQK_A, bMaskDWord);
regE9C = ODM_GetBBReg(dm_odm, rTx_Power_After_IQK_A, bMaskDWord);
- if (!(regeac & BIT28) &&
+ if (!(regeac & BIT(28)) &&
(((regE94 & 0x03FF0000)>>16) != 0x142) &&
(((regE9C & 0x03FF0000)>>16) != 0x42))
result |= 0x01;
@@ -495,7 +495,7 @@ phy_PathA_RxIQK(struct adapter *adapt, bool configPathB)
ODM_SetBBReg(dm_odm, rFPGA0_IQK, bMaskDWord, 0x00000000);
ODM_SetRFReg(dm_odm, RF_PATH_A, 0xdf, bRFRegOffsetMask, 0x180);
- if (!(regeac & BIT27) && /* if Tx is OK, check whether Rx is OK */
+ if (!(regeac & BIT(27)) && /* if Tx is OK, check whether Rx is OK */
(((regEA4 & 0x03FF0000)>>16) != 0x132) &&
(((regeac & 0x03FF0000)>>16) != 0x36))
result |= 0x02;
@@ -525,14 +525,14 @@ phy_PathB_IQK_8188E(struct adapter *adapt)
regec4 = ODM_GetBBReg(dm_odm, rRx_Power_Before_IQK_B_2, bMaskDWord);
regecc = ODM_GetBBReg(dm_odm, rRx_Power_After_IQK_B_2, bMaskDWord);
- if (!(regeac & BIT31) &&
+ if (!(regeac & BIT(31)) &&
(((regeb4 & 0x03FF0000)>>16) != 0x142) &&
(((regebc & 0x03FF0000)>>16) != 0x42))
result |= 0x01;
else
return result;
- if (!(regeac & BIT30) &&
+ if (!(regeac & BIT(30)) &&
(((regec4 & 0x03FF0000)>>16) != 0x132) &&
(((regecc & 0x03FF0000)>>16) != 0x36))
result |= 0x02;
@@ -732,9 +732,9 @@ _PHY_MACSettingCalibration(
ODM_Write1Byte(dm_odm, MACReg[i], 0x3F);
for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++) {
- ODM_Write1Byte(dm_odm, MACReg[i], (u8)(MACBackup[i]&(~BIT3)));
+ ODM_Write1Byte(dm_odm, MACReg[i], (u8)(MACBackup[i]&(~BIT(3))));
}
- ODM_Write1Byte(dm_odm, MACReg[i], (u8)(MACBackup[i]&(~BIT5)));
+ ODM_Write1Byte(dm_odm, MACReg[i], (u8)(MACBackup[i]&(~BIT(5))));
}
void
@@ -907,15 +907,15 @@ static void phy_IQCalibrate_8188E(struct adapter *adapt, s32 result[][8], u8 t,
}
/* BB setting */
- ODM_SetBBReg(dm_odm, rFPGA0_RFMOD, BIT24, 0x00);
+ ODM_SetBBReg(dm_odm, rFPGA0_RFMOD, BIT(24), 0x00);
ODM_SetBBReg(dm_odm, rOFDM0_TRxPathEnable, bMaskDWord, 0x03a05600);
ODM_SetBBReg(dm_odm, rOFDM0_TRMuxPar, bMaskDWord, 0x000800e4);
ODM_SetBBReg(dm_odm, rFPGA0_XCD_RFInterfaceSW, bMaskDWord, 0x22204000);
- ODM_SetBBReg(dm_odm, rFPGA0_XAB_RFInterfaceSW, BIT10, 0x01);
- ODM_SetBBReg(dm_odm, rFPGA0_XAB_RFInterfaceSW, BIT26, 0x01);
- ODM_SetBBReg(dm_odm, rFPGA0_XA_RFInterfaceOE, BIT10, 0x00);
- ODM_SetBBReg(dm_odm, rFPGA0_XB_RFInterfaceOE, BIT10, 0x00);
+ ODM_SetBBReg(dm_odm, rFPGA0_XAB_RFInterfaceSW, BIT(10), 0x01);
+ ODM_SetBBReg(dm_odm, rFPGA0_XAB_RFInterfaceSW, BIT(26), 0x01);
+ ODM_SetBBReg(dm_odm, rFPGA0_XA_RFInterfaceOE, BIT(10), 0x00);
+ ODM_SetBBReg(dm_odm, rFPGA0_XB_RFInterfaceOE, BIT(10), 0x00);
if (is2t) {
ODM_SetBBReg(dm_odm, rFPGA0_XA_LSSIParameter, bMaskDWord, 0x00010000);
@@ -1255,21 +1255,21 @@ static void phy_setrfpathswitch_8188e(struct adapter *adapt, bool main, bool is2
if (!adapt->hw_init_completed) {
u8 u1btmp;
- u1btmp = ODM_Read1Byte(dm_odm, REG_LEDCFG2) | BIT7;
+ u1btmp = ODM_Read1Byte(dm_odm, REG_LEDCFG2) | BIT(7);
ODM_Write1Byte(dm_odm, REG_LEDCFG2, u1btmp);
- ODM_SetBBReg(dm_odm, rFPGA0_XAB_RFParameter, BIT13, 0x01);
+ ODM_SetBBReg(dm_odm, rFPGA0_XAB_RFParameter, BIT(13), 0x01);
}
if (is2t) { /* 92C */
if (main)
- ODM_SetBBReg(dm_odm, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x1); /* 92C_Path_A */
+ ODM_SetBBReg(dm_odm, rFPGA0_XB_RFInterfaceOE, BIT(5)|BIT(6), 0x1); /* 92C_Path_A */
else
- ODM_SetBBReg(dm_odm, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x2); /* BT */
+ ODM_SetBBReg(dm_odm, rFPGA0_XB_RFInterfaceOE, BIT(5)|BIT(6), 0x2); /* BT */
} else { /* 88C */
if (main)
- ODM_SetBBReg(dm_odm, rFPGA0_XA_RFInterfaceOE, BIT8|BIT9, 0x2); /* Main */
+ ODM_SetBBReg(dm_odm, rFPGA0_XA_RFInterfaceOE, BIT(8)|BIT(9), 0x2); /* Main */
else
- ODM_SetBBReg(dm_odm, rFPGA0_XA_RFInterfaceOE, BIT8|BIT9, 0x1); /* Aux */
+ ODM_SetBBReg(dm_odm, rFPGA0_XA_RFInterfaceOE, BIT(8)|BIT(9), 0x1); /* Aux */
}
}
diff --git a/drivers/staging/r8188eu/hal/odm.c b/drivers/staging/r8188eu/hal/odm.c
index 99b61a6c3a7a..53198bf92c0f 100644
--- a/drivers/staging/r8188eu/hal/odm.c
+++ b/drivers/staging/r8188eu/hal/odm.c
@@ -426,7 +426,7 @@ void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value)
void odm_CommonInfoSelfInit(struct odm_dm_struct *pDM_Odm)
{
- pDM_Odm->bCckHighPower = (bool) ODM_GetBBReg(pDM_Odm, 0x824, BIT9);
+ pDM_Odm->bCckHighPower = (bool) ODM_GetBBReg(pDM_Odm, 0x824, BIT(9));
pDM_Odm->RFPathRxEnable = (u8) ODM_GetBBReg(pDM_Odm, 0xc04, 0x0F);
if (pDM_Odm->SupportICType & (ODM_RTL8192C|ODM_RTL8192D))
pDM_Odm->AntDivType = CG_TRX_HW_ANTDIV;
@@ -798,8 +798,8 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
if (pDM_Odm->SupportICType & ODM_IC_11N_SERIES) {
/* hold ofdm counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_HOLDC_11N, BIT31, 1); /* hold page C counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT31, 1); /* hold page D counter */
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_HOLDC_11N, BIT(31), 1); /* hold page C counter */
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT(31), 1); /* hold page D counter */
ret_value = ODM_GetBBReg(pDM_Odm, ODM_REG_OFDM_FA_TYPE1_11N, bMaskDWord);
FalseAlmCnt->Cnt_Fast_Fsync = (ret_value&0xffff);
@@ -824,8 +824,8 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
}
/* hold cck counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT12, 1);
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT14, 1);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT(12), 1);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT(14), 1);
ret_value = ODM_GetBBReg(pDM_Odm, ODM_REG_CCK_FA_LSB_11N, bMaskByte0);
FalseAlmCnt->Cnt_Cck_fail = ret_value;
@@ -847,20 +847,20 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
if (pDM_Odm->SupportICType >= ODM_RTL8723A) {
/* reset false alarm counter registers */
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTC_11N, BIT31, 1);
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTC_11N, BIT31, 0);
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT27, 1);
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT27, 0);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTC_11N, BIT(31), 1);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTC_11N, BIT(31), 0);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT(27), 1);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT(27), 0);
/* update ofdm counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_HOLDC_11N, BIT31, 0); /* update page C counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT31, 0); /* update page D counter */
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_HOLDC_11N, BIT(31), 0); /* update page C counter */
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RSTD_11N, BIT(31), 0); /* update page D counter */
/* reset CCK CCA counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT13|BIT12, 0);
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT13|BIT12, 2);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT(13)|BIT(12), 0);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT(13)|BIT(12), 2);
/* reset CCK FA counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT15|BIT14, 0);
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT15|BIT14, 2);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT(15)|BIT(14), 0);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11N, BIT(15)|BIT(14), 2);
}
} else { /* FOR ODM_IC_11AC_SERIES */
/* read OFDM FA counter */
@@ -869,11 +869,11 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
FalseAlmCnt->Cnt_all = FalseAlmCnt->Cnt_Ofdm_fail + FalseAlmCnt->Cnt_Cck_fail;
/* reset OFDM FA coutner */
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RST_11AC, BIT17, 1);
- ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RST_11AC, BIT17, 0);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RST_11AC, BIT(17), 1);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_OFDM_FA_RST_11AC, BIT(17), 0);
/* reset CCK FA counter */
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11AC, BIT15, 0);
- ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11AC, BIT15, 1);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11AC, BIT(15), 0);
+ ODM_SetBBReg(pDM_Odm, ODM_REG_CCK_FA_RST_11AC, BIT(15), 1);
}
}
@@ -1000,7 +1000,7 @@ void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal)
}
if (pDM_PSTable->initialize == 0) {
pDM_PSTable->Reg874 = (ODM_GetBBReg(pDM_Odm, 0x874, bMaskDWord)&0x1CC000)>>14;
- pDM_PSTable->RegC70 = (ODM_GetBBReg(pDM_Odm, 0xc70, bMaskDWord)&BIT3)>>3;
+ pDM_PSTable->RegC70 = (ODM_GetBBReg(pDM_Odm, 0xc70, bMaskDWord)&BIT(3))>>3;
pDM_PSTable->Reg85C = (ODM_GetBBReg(pDM_Odm, 0x85c, bMaskDWord)&0xFF000000)>>24;
pDM_PSTable->RegA74 = (ODM_GetBBReg(pDM_Odm, 0xa74, bMaskDWord)&0xF000)>>12;
pDM_PSTable->initialize = 1;
@@ -1031,23 +1031,23 @@ void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal)
/* <tynli_note> 8723 RSSI report will be wrong. Set 0x874[5]=1 when enter BB power saving mode. */
/* Suggested by SD3 Yu-Nan. 2011.01.20. */
if (pDM_Odm->SupportICType == ODM_RTL8723A)
- ODM_SetBBReg(pDM_Odm, 0x874, BIT5, 0x1); /* Reg874[5]=1b'1 */
+ ODM_SetBBReg(pDM_Odm, 0x874, BIT(5), 0x1); /* Reg874[5]=1b'1 */
ODM_SetBBReg(pDM_Odm, 0x874, 0x1C0000, 0x2); /* Reg874[20:18]=3'b010 */
- ODM_SetBBReg(pDM_Odm, 0xc70, BIT3, 0); /* RegC70[3]=1'b0 */
+ ODM_SetBBReg(pDM_Odm, 0xc70, BIT(3), 0); /* RegC70[3]=1'b0 */
ODM_SetBBReg(pDM_Odm, 0x85c, 0xFF000000, 0x63); /* Reg85C[31:24]=0x63 */
ODM_SetBBReg(pDM_Odm, 0x874, 0xC000, 0x2); /* Reg874[15:14]=2'b10 */
ODM_SetBBReg(pDM_Odm, 0xa74, 0xF000, 0x3); /* RegA75[7:4]=0x3 */
- ODM_SetBBReg(pDM_Odm, 0x818, BIT28, 0x0); /* Reg818[28]=1'b0 */
- ODM_SetBBReg(pDM_Odm, 0x818, BIT28, 0x1); /* Reg818[28]=1'b1 */
+ ODM_SetBBReg(pDM_Odm, 0x818, BIT(28), 0x0); /* Reg818[28]=1'b0 */
+ ODM_SetBBReg(pDM_Odm, 0x818, BIT(28), 0x1); /* Reg818[28]=1'b1 */
} else {
ODM_SetBBReg(pDM_Odm, 0x874, 0x1CC000, pDM_PSTable->Reg874);
- ODM_SetBBReg(pDM_Odm, 0xc70, BIT3, pDM_PSTable->RegC70);
+ ODM_SetBBReg(pDM_Odm, 0xc70, BIT(3), pDM_PSTable->RegC70);
ODM_SetBBReg(pDM_Odm, 0x85c, 0xFF000000, pDM_PSTable->Reg85C);
ODM_SetBBReg(pDM_Odm, 0xa74, 0xF000, pDM_PSTable->RegA74);
- ODM_SetBBReg(pDM_Odm, 0x818, BIT28, 0x0);
+ ODM_SetBBReg(pDM_Odm, 0x818, BIT(28), 0x0);
if (pDM_Odm->SupportICType == ODM_RTL8723A)
- ODM_SetBBReg(pDM_Odm, 0x874, BIT5, 0x0); /* Reg874[5]=1b'0 */
+ ODM_SetBBReg(pDM_Odm, 0x874, BIT(5), 0x0); /* Reg874[5]=1b'0 */
}
pDM_PSTable->PreRFState = pDM_PSTable->CurRFState;
}
@@ -1491,7 +1491,7 @@ void odm_TXPowerTrackingCheckCE(struct odm_dm_struct *pDM_Odm)
return;
if (!pDM_Odm->RFCalibrateInfo.TM_Trigger) { /* at least delay 1 sec */
- PHY_SetRFReg(Adapter, RF_PATH_A, RF_T_METER_88E, BIT17 | BIT16, 0x03);
+ PHY_SetRFReg(Adapter, RF_PATH_A, RF_T_METER_88E, BIT(17) | BIT(16), 0x03);
pDM_Odm->RFCalibrateInfo.TM_Trigger = 1;
return;
@@ -1700,10 +1700,10 @@ u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point, u8 initial_gai
ODM_SetBBReg(pDM_Odm, 0x808, 0x3FF, point);
/* Start PSD calculation, Reg808[22]=0->1 */
- ODM_SetBBReg(pDM_Odm, 0x808, BIT22, 1);
+ ODM_SetBBReg(pDM_Odm, 0x808, BIT(22), 1);
/* Need to wait for HW PSD report */
ODM_StallExecution(30);
- ODM_SetBBReg(pDM_Odm, 0x808, BIT22, 0);
+ ODM_SetBBReg(pDM_Odm, 0x808, BIT(22), 0);
/* Read PSD report, Reg8B4[15:0] */
psd_report = ODM_GetBBReg(pDM_Odm, 0x8B4, bMaskDWord) & 0x0000FFFF;
@@ -1805,11 +1805,11 @@ bool ODM_SingleDualAntennaDetection(struct odm_dm_struct *pDM_Odm, u8 mode)
if (pDM_Odm->SupportICType == ODM_RTL8192C) {
/* Which path in ADC/DAC is turnned on for PSD: both I/Q */
- ODM_SetBBReg(pDM_Odm, 0x808, BIT10|BIT11, 0x3);
+ ODM_SetBBReg(pDM_Odm, 0x808, BIT(10)|BIT(11), 0x3);
/* Ageraged number: 8 */
- ODM_SetBBReg(pDM_Odm, 0x808, BIT12|BIT13, 0x1);
+ ODM_SetBBReg(pDM_Odm, 0x808, BIT(12)|BIT(13), 0x1);
/* pts = 128; */
- ODM_SetBBReg(pDM_Odm, 0x808, BIT14|BIT15, 0x0);
+ ODM_SetBBReg(pDM_Odm, 0x808, BIT(14)|BIT(15), 0x0);
}
/* 1 Backup Current RF/BB Settings */
@@ -1831,7 +1831,7 @@ bool ODM_SingleDualAntennaDetection(struct odm_dm_struct *pDM_Odm, u8 mode)
odm_PHY_SaveAFERegisters(pDM_Odm, AFE_REG_8723A, AFE_Backup, 16);
/* Set PSD 128 pts */
- ODM_SetBBReg(pDM_Odm, rFPGA0_PSDFunction, BIT14|BIT15, 0x0); /* 128 pts */
+ ODM_SetBBReg(pDM_Odm, rFPGA0_PSDFunction, BIT(14)|BIT(15), 0x0); /* 128 pts */
/* To SET CH1 to do */
ODM_SetRFReg(pDM_Odm, RF_PATH_A, ODM_CHANNEL, bRFRegOffsetMask, 0x01); /* Channel 1 */
diff --git a/drivers/staging/r8188eu/hal/odm_HWConfig.c b/drivers/staging/r8188eu/hal/odm_HWConfig.c
index 5f29535590cd..343c647a1eaf 100644
--- a/drivers/staging/r8188eu/hal/odm_HWConfig.c
+++ b/drivers/staging/r8188eu/hal/odm_HWConfig.c
@@ -449,7 +449,7 @@ static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
}
}
- pEntry->rssi_stat.PacketMap = (pEntry->rssi_stat.PacketMap<<1) | BIT0;
+ pEntry->rssi_stat.PacketMap = (pEntry->rssi_stat.PacketMap<<1) | BIT(0);
} else {
RSSI_Ave = pPhyInfo->RxPWDBAll;
@@ -478,7 +478,7 @@ static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
pEntry->rssi_stat.ValidBit++;
for (i = 0; i < pEntry->rssi_stat.ValidBit; i++)
- OFDM_pkt += (u8)(pEntry->rssi_stat.PacketMap>>i)&BIT0;
+ OFDM_pkt += (u8)(pEntry->rssi_stat.PacketMap>>i)&BIT(0);
if (pEntry->rssi_stat.ValidBit == 64) {
Weighting = ((OFDM_pkt<<4) > 64) ? 64 : (OFDM_pkt<<4);
diff --git a/drivers/staging/r8188eu/hal/odm_RTL8188E.c b/drivers/staging/r8188eu/hal/odm_RTL8188E.c
index 02e44403fd31..b6b95649f3af 100644
--- a/drivers/staging/r8188eu/hal/odm_RTL8188E.c
+++ b/drivers/staging/r8188eu/hal/odm_RTL8188E.c
@@ -18,24 +18,24 @@ static void odm_RX_HWAntDivInit(struct odm_dm_struct *dm_odm)
if (*dm_odm->mp_mode == 1) {
dm_odm->AntDivType = CGCS_RX_SW_ANTDIV;
- ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT7, 0); /* disable HW AntDiv */
- ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT31, 1); /* 1:CG, 0:CS */
+ ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT(7), 0); /* disable HW AntDiv */
+ ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT(31), 1); /* 1:CG, 0:CS */
return;
}
/* MAC Setting */
value32 = ODM_GetMACReg(dm_odm, ODM_REG_ANTSEL_PIN_11N, bMaskDWord);
- ODM_SetMACReg(dm_odm, ODM_REG_ANTSEL_PIN_11N, bMaskDWord, value32|(BIT23|BIT25)); /* Reg4C[25]=1, Reg4C[23]=1 for pin output */
+ ODM_SetMACReg(dm_odm, ODM_REG_ANTSEL_PIN_11N, bMaskDWord, value32|(BIT(23)|BIT(25))); /* Reg4C[25]=1, Reg4C[23]=1 for pin output */
/* Pin Settings */
- ODM_SetBBReg(dm_odm, ODM_REG_PIN_CTRL_11N, BIT9|BIT8, 0);/* Reg870[8]=1'b0, Reg870[9]=1'b0 antsel antselb by HW */
- ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT10, 0); /* Reg864[10]=1'b0 antsel2 by HW */
- ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT22, 1); /* Regb2c[22]=1'b0 disable CS/CG switch */
- ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT31, 1); /* Regb2c[31]=1'b1 output at CG only */
+ ODM_SetBBReg(dm_odm, ODM_REG_PIN_CTRL_11N, BIT(9)|BIT(8), 0);/* Reg870[8]=1'b0, Reg870[9]=1'b0 antsel antselb by HW */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT(10), 0); /* Reg864[10]=1'b0 antsel2 by HW */
+ ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT(22), 1); /* Regb2c[22]=1'b0 disable CS/CG switch */
+ ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT(31), 1); /* Regb2c[31]=1'b1 output at CG only */
/* OFDM Settings */
ODM_SetBBReg(dm_odm, ODM_REG_ANTDIV_PARA1_11N, bMaskDWord, 0x000000a0);
/* CCK Settings */
- ODM_SetBBReg(dm_odm, ODM_REG_BB_PWR_SAV4_11N, BIT7, 1); /* Fix CCK PHY status report issue */
- ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA2_11N, BIT4, 1); /* CCK complete HW AntDiv within 64 samples */
+ ODM_SetBBReg(dm_odm, ODM_REG_BB_PWR_SAV4_11N, BIT(7), 1); /* Fix CCK PHY status report issue */
+ ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA2_11N, BIT(4), 1); /* CCK complete HW AntDiv within 64 samples */
ODM_UpdateRxIdleAnt_88E(dm_odm, MAIN_ANT);
ODM_SetBBReg(dm_odm, ODM_REG_ANT_MAPPING1_11N, 0xFFFF, 0x0201); /* antenna mapping table */
}
@@ -46,32 +46,32 @@ static void odm_TRX_HWAntDivInit(struct odm_dm_struct *dm_odm)
if (*dm_odm->mp_mode == 1) {
dm_odm->AntDivType = CGCS_RX_SW_ANTDIV;
- ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT7, 0); /* disable HW AntDiv */
- ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT5|BIT4|BIT3, 0); /* Default RX (0/1) */
+ ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT(7), 0); /* disable HW AntDiv */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT(5)|BIT(4)|BIT(3), 0); /* Default RX (0/1) */
return;
}
/* MAC Setting */
value32 = ODM_GetMACReg(dm_odm, ODM_REG_ANTSEL_PIN_11N, bMaskDWord);
- ODM_SetMACReg(dm_odm, ODM_REG_ANTSEL_PIN_11N, bMaskDWord, value32|(BIT23|BIT25)); /* Reg4C[25]=1, Reg4C[23]=1 for pin output */
+ ODM_SetMACReg(dm_odm, ODM_REG_ANTSEL_PIN_11N, bMaskDWord, value32|(BIT(23)|BIT(25))); /* Reg4C[25]=1, Reg4C[23]=1 for pin output */
/* Pin Settings */
- ODM_SetBBReg(dm_odm, ODM_REG_PIN_CTRL_11N, BIT9|BIT8, 0);/* Reg870[8]=1'b0, Reg870[9]=1'b0 antsel antselb by HW */
- ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT10, 0); /* Reg864[10]=1'b0 antsel2 by HW */
- ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT22, 0); /* Regb2c[22]=1'b0 disable CS/CG switch */
- ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT31, 1); /* Regb2c[31]=1'b1 output at CG only */
+ ODM_SetBBReg(dm_odm, ODM_REG_PIN_CTRL_11N, BIT(9)|BIT(8), 0);/* Reg870[8]=1'b0, Reg870[9]=1'b0 antsel antselb by HW */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT(10), 0); /* Reg864[10]=1'b0 antsel2 by HW */
+ ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT(22), 0); /* Regb2c[22]=1'b0 disable CS/CG switch */
+ ODM_SetBBReg(dm_odm, ODM_REG_LNA_SWITCH_11N, BIT(31), 1); /* Regb2c[31]=1'b1 output at CG only */
/* OFDM Settings */
ODM_SetBBReg(dm_odm, ODM_REG_ANTDIV_PARA1_11N, bMaskDWord, 0x000000a0);
/* CCK Settings */
- ODM_SetBBReg(dm_odm, ODM_REG_BB_PWR_SAV4_11N, BIT7, 1); /* Fix CCK PHY status report issue */
- ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA2_11N, BIT4, 1); /* CCK complete HW AntDiv within 64 samples */
+ ODM_SetBBReg(dm_odm, ODM_REG_BB_PWR_SAV4_11N, BIT(7), 1); /* Fix CCK PHY status report issue */
+ ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA2_11N, BIT(4), 1); /* CCK complete HW AntDiv within 64 samples */
/* Tx Settings */
- ODM_SetBBReg(dm_odm, ODM_REG_TX_ANT_CTRL_11N, BIT21, 0); /* Reg80c[21]=1'b0 from TX Reg */
+ ODM_SetBBReg(dm_odm, ODM_REG_TX_ANT_CTRL_11N, BIT(21), 0); /* Reg80c[21]=1'b0 from TX Reg */
ODM_UpdateRxIdleAnt_88E(dm_odm, MAIN_ANT);
/* antenna mapping table */
if (!dm_odm->bIsMPChip) { /* testchip */
- ODM_SetBBReg(dm_odm, ODM_REG_RX_DEFUALT_A_11N, BIT10|BIT9|BIT8, 1); /* Reg858[10:8]=3'b001 */
- ODM_SetBBReg(dm_odm, ODM_REG_RX_DEFUALT_A_11N, BIT13|BIT12|BIT11, 2); /* Reg858[13:11]=3'b010 */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_DEFUALT_A_11N, BIT(10)|BIT(9)|BIT(8), 1); /* Reg858[10:8]=3'b001 */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_DEFUALT_A_11N, BIT(13)|BIT(12)|BIT(11), 2); /* Reg858[13:11]=3'b010 */
} else { /* MPchip */
ODM_SetBBReg(dm_odm, ODM_REG_ANT_MAPPING1_11N, bMaskDWord, 0x0201); /* Reg914=3'b010, Reg915=3'b001 */
}
@@ -97,40 +97,40 @@ static void odm_FastAntTrainingInit(struct odm_dm_struct *dm_odm)
/* MAC Setting */
value32 = ODM_GetMACReg(dm_odm, 0x4c, bMaskDWord);
- ODM_SetMACReg(dm_odm, 0x4c, bMaskDWord, value32|(BIT23|BIT25)); /* Reg4C[25]=1, Reg4C[23]=1 for pin output */
+ ODM_SetMACReg(dm_odm, 0x4c, bMaskDWord, value32|(BIT(23)|BIT(25))); /* Reg4C[25]=1, Reg4C[23]=1 for pin output */
value32 = ODM_GetMACReg(dm_odm, 0x7B4, bMaskDWord);
- ODM_SetMACReg(dm_odm, 0x7b4, bMaskDWord, value32|(BIT16|BIT17)); /* Reg7B4[16]=1 enable antenna training, Reg7B4[17]=1 enable A2 match */
+ ODM_SetMACReg(dm_odm, 0x7b4, bMaskDWord, value32|(BIT(16)|BIT(17))); /* Reg7B4[16]=1 enable antenna training, Reg7B4[17]=1 enable A2 match */
/* Match MAC ADDR */
ODM_SetMACReg(dm_odm, 0x7b4, 0xFFFF, 0);
ODM_SetMACReg(dm_odm, 0x7b0, bMaskDWord, 0);
- ODM_SetBBReg(dm_odm, 0x870, BIT9|BIT8, 0);/* Reg870[8]=1'b0, Reg870[9]=1'b0 antsel antselb by HW */
- ODM_SetBBReg(dm_odm, 0x864, BIT10, 0); /* Reg864[10]=1'b0 antsel2 by HW */
- ODM_SetBBReg(dm_odm, 0xb2c, BIT22, 0); /* Regb2c[22]=1'b0 disable CS/CG switch */
- ODM_SetBBReg(dm_odm, 0xb2c, BIT31, 1); /* Regb2c[31]=1'b1 output at CG only */
+ ODM_SetBBReg(dm_odm, 0x870, BIT(9)|BIT(8), 0);/* Reg870[8]=1'b0, Reg870[9]=1'b0 antsel antselb by HW */
+ ODM_SetBBReg(dm_odm, 0x864, BIT(10), 0); /* Reg864[10]=1'b0 antsel2 by HW */
+ ODM_SetBBReg(dm_odm, 0xb2c, BIT(22), 0); /* Regb2c[22]=1'b0 disable CS/CG switch */
+ ODM_SetBBReg(dm_odm, 0xb2c, BIT(31), 1); /* Regb2c[31]=1'b1 output at CG only */
ODM_SetBBReg(dm_odm, 0xca4, bMaskDWord, 0x000000a0);
/* antenna mapping table */
if (AntCombination == 2) {
if (!dm_odm->bIsMPChip) { /* testchip */
- ODM_SetBBReg(dm_odm, 0x858, BIT10|BIT9|BIT8, 1); /* Reg858[10:8]=3'b001 */
- ODM_SetBBReg(dm_odm, 0x858, BIT13|BIT12|BIT11, 2); /* Reg858[13:11]=3'b010 */
+ ODM_SetBBReg(dm_odm, 0x858, BIT(10)|BIT(9)|BIT(8), 1); /* Reg858[10:8]=3'b001 */
+ ODM_SetBBReg(dm_odm, 0x858, BIT(13)|BIT(12)|BIT(11), 2); /* Reg858[13:11]=3'b010 */
} else { /* MPchip */
ODM_SetBBReg(dm_odm, 0x914, bMaskByte0, 1);
ODM_SetBBReg(dm_odm, 0x914, bMaskByte1, 2);
}
} else if (AntCombination == 7) {
if (!dm_odm->bIsMPChip) { /* testchip */
- ODM_SetBBReg(dm_odm, 0x858, BIT10|BIT9|BIT8, 0); /* Reg858[10:8]=3'b000 */
- ODM_SetBBReg(dm_odm, 0x858, BIT13|BIT12|BIT11, 1); /* Reg858[13:11]=3'b001 */
- ODM_SetBBReg(dm_odm, 0x878, BIT16, 0);
- ODM_SetBBReg(dm_odm, 0x858, BIT15|BIT14, 2); /* Reg878[0],Reg858[14:15])=3'b010 */
- ODM_SetBBReg(dm_odm, 0x878, BIT19|BIT18|BIT17, 3);/* Reg878[3:1]=3b'011 */
- ODM_SetBBReg(dm_odm, 0x878, BIT22|BIT21|BIT20, 4);/* Reg878[6:4]=3b'100 */
- ODM_SetBBReg(dm_odm, 0x878, BIT25|BIT24|BIT23, 5);/* Reg878[9:7]=3b'101 */
- ODM_SetBBReg(dm_odm, 0x878, BIT28|BIT27|BIT26, 6);/* Reg878[12:10]=3b'110 */
- ODM_SetBBReg(dm_odm, 0x878, BIT31|BIT30|BIT29, 7);/* Reg878[15:13]=3b'111 */
+ ODM_SetBBReg(dm_odm, 0x858, BIT(10)|BIT(9)|BIT(8), 0); /* Reg858[10:8]=3'b000 */
+ ODM_SetBBReg(dm_odm, 0x858, BIT(13)|BIT(12)|BIT(11), 1); /* Reg858[13:11]=3'b001 */
+ ODM_SetBBReg(dm_odm, 0x878, BIT(16), 0);
+ ODM_SetBBReg(dm_odm, 0x858, BIT(15)|BIT(14), 2); /* Reg878[0],Reg858[14:15])=3'b010 */
+ ODM_SetBBReg(dm_odm, 0x878, BIT(19)|BIT(18)|BIT(17), 3);/* Reg878[3:1]=3b'011 */
+ ODM_SetBBReg(dm_odm, 0x878, BIT(22)|BIT(21)|BIT(20), 4);/* Reg878[6:4]=3b'100 */
+ ODM_SetBBReg(dm_odm, 0x878, BIT(25)|BIT(24)|BIT(23), 5);/* Reg878[9:7]=3b'101 */
+ ODM_SetBBReg(dm_odm, 0x878, BIT(28)|BIT(27)|BIT(26), 6);/* Reg878[12:10]=3b'110 */
+ ODM_SetBBReg(dm_odm, 0x878, BIT(31)|BIT(30)|BIT(29), 7);/* Reg878[15:13]=3b'111 */
} else { /* MPchip */
ODM_SetBBReg(dm_odm, 0x914, bMaskByte0, 0);
ODM_SetBBReg(dm_odm, 0x914, bMaskByte1, 1);
@@ -144,13 +144,13 @@ static void odm_FastAntTrainingInit(struct odm_dm_struct *dm_odm)
}
/* Default Ant Setting when no fast training */
- ODM_SetBBReg(dm_odm, 0x80c, BIT21, 1); /* Reg80c[21]=1'b1 from TX Info */
- ODM_SetBBReg(dm_odm, 0x864, BIT5|BIT4|BIT3, 0); /* Default RX */
- ODM_SetBBReg(dm_odm, 0x864, BIT8|BIT7|BIT6, 1); /* Optional RX */
+ ODM_SetBBReg(dm_odm, 0x80c, BIT(21), 1); /* Reg80c[21]=1'b1 from TX Info */
+ ODM_SetBBReg(dm_odm, 0x864, BIT(5)|BIT(4)|BIT(3), 0); /* Default RX */
+ ODM_SetBBReg(dm_odm, 0x864, BIT(8)|BIT(7)|BIT(6), 1); /* Optional RX */
/* Enter Traing state */
- ODM_SetBBReg(dm_odm, 0x864, BIT2|BIT1|BIT0, (AntCombination-1)); /* Reg864[2:0]=3'd6 ant combination=reg864[2:0]+1 */
- ODM_SetBBReg(dm_odm, 0xc50, BIT7, 1); /* RegC50[7]=1'b1 enable HW AntDiv */
+ ODM_SetBBReg(dm_odm, 0x864, BIT(2)|BIT(1)|BIT(0), (AntCombination-1)); /* Reg864[2:0]=3'd6 ant combination=reg864[2:0]+1 */
+ ODM_SetBBReg(dm_odm, 0xc50, BIT(7), 1); /* RegC50[7]=1'b1 enable HW AntDiv */
}
void ODM_AntennaDiversityInit_88E(struct odm_dm_struct *dm_odm)
@@ -181,13 +181,13 @@ void ODM_UpdateRxIdleAnt_88E(struct odm_dm_struct *dm_odm, u8 Ant)
}
if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV) {
- ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT5|BIT4|BIT3, DefaultAnt); /* Default RX */
- ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT8|BIT7|BIT6, OptionalAnt); /* Optional RX */
- ODM_SetBBReg(dm_odm, ODM_REG_ANTSEL_CTRL_11N, BIT14|BIT13|BIT12, DefaultAnt); /* Default TX */
- ODM_SetMACReg(dm_odm, ODM_REG_RESP_TX_11N, BIT6|BIT7, DefaultAnt); /* Resp Tx */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT(5)|BIT(4)|BIT(3), DefaultAnt); /* Default RX */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT(8)|BIT(7)|BIT(6), OptionalAnt); /* Optional RX */
+ ODM_SetBBReg(dm_odm, ODM_REG_ANTSEL_CTRL_11N, BIT(14)|BIT(13)|BIT(12), DefaultAnt); /* Default TX */
+ ODM_SetMACReg(dm_odm, ODM_REG_RESP_TX_11N, BIT(6)|BIT(7), DefaultAnt); /* Resp Tx */
} else if (dm_odm->AntDivType == CGCS_RX_HW_ANTDIV) {
- ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT5|BIT4|BIT3, DefaultAnt); /* Default RX */
- ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT8|BIT7|BIT6, OptionalAnt); /* Optional RX */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT(5)|BIT(4)|BIT(3), DefaultAnt); /* Default RX */
+ ODM_SetBBReg(dm_odm, ODM_REG_RX_ANT_CTRL_11N, BIT(8)|BIT(7)|BIT(6), OptionalAnt); /* Optional RX */
}
}
dm_fat_tbl->RxIdleAnt = Ant;
@@ -204,9 +204,9 @@ static void odm_UpdateTxAnt_88E(struct odm_dm_struct *dm_odm, u8 Ant, u32 MacId)
TargetAnt = MAIN_ANT_CG_TRX;
else
TargetAnt = AUX_ANT_CG_TRX;
- dm_fat_tbl->antsel_a[MacId] = TargetAnt&BIT0;
- dm_fat_tbl->antsel_b[MacId] = (TargetAnt&BIT1)>>1;
- dm_fat_tbl->antsel_c[MacId] = (TargetAnt&BIT2)>>2;
+ dm_fat_tbl->antsel_a[MacId] = TargetAnt&BIT(0);
+ dm_fat_tbl->antsel_b[MacId] = (TargetAnt&BIT(1))>>1;
+ dm_fat_tbl->antsel_c[MacId] = (TargetAnt&BIT(2))>>2;
}
void ODM_SetTxAntByTxInfo_88E(struct odm_dm_struct *dm_odm, u8 *pDesc, u8 macId)
@@ -300,20 +300,20 @@ void ODM_AntennaDiversity_88E(struct odm_dm_struct *dm_odm)
return;
if (!dm_odm->bLinked) {
if (dm_fat_tbl->bBecomeLinked) {
- ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT7, 0); /* RegC50[7]=1'b1 enable HW AntDiv */
- ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA1_11N, BIT15, 0); /* Enable CCK AntDiv */
+ ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT(7), 0); /* RegC50[7]=1'b1 enable HW AntDiv */
+ ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA1_11N, BIT(15), 0); /* Enable CCK AntDiv */
if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV)
- ODM_SetBBReg(dm_odm, ODM_REG_TX_ANT_CTRL_11N, BIT21, 0); /* Reg80c[21]=1'b0 from TX Reg */
+ ODM_SetBBReg(dm_odm, ODM_REG_TX_ANT_CTRL_11N, BIT(21), 0); /* Reg80c[21]=1'b0 from TX Reg */
dm_fat_tbl->bBecomeLinked = dm_odm->bLinked;
}
return;
} else {
if (!dm_fat_tbl->bBecomeLinked) {
/* Because HW AntDiv is disabled before Link, we enable HW AntDiv after link */
- ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT7, 1); /* RegC50[7]=1'b1 enable HW AntDiv */
- ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA1_11N, BIT15, 1); /* Enable CCK AntDiv */
+ ODM_SetBBReg(dm_odm, ODM_REG_IGI_A_11N, BIT(7), 1); /* RegC50[7]=1'b1 enable HW AntDiv */
+ ODM_SetBBReg(dm_odm, ODM_REG_CCK_ANTDIV_PARA1_11N, BIT(15), 1); /* Enable CCK AntDiv */
if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV)
- ODM_SetBBReg(dm_odm, ODM_REG_TX_ANT_CTRL_11N, BIT21, 1); /* Reg80c[21]=1'b1 from TX Info */
+ ODM_SetBBReg(dm_odm, ODM_REG_TX_ANT_CTRL_11N, BIT(21), 1); /* Reg80c[21]=1'b1 from TX Info */
dm_fat_tbl->bBecomeLinked = dm_odm->bLinked;
}
}
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_cmd.c b/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
index 02eda8fae25c..6cbda9ab6e3f 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
@@ -598,7 +598,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Do not set TSF again here or vWiFi beacon DMA INT will not work. */
/* Set REG_CR bit 8. DMA beacon by SW. */
- haldata->RegCR_1 |= BIT0;
+ haldata->RegCR_1 |= BIT(0);
rtw_write8(adapt, REG_CR+1, haldata->RegCR_1);
/* Disable Hw protection for a time which revserd for Hw sending beacon. */
@@ -607,14 +607,14 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)|BIT(4));
- if (haldata->RegFwHwTxQCtrl&BIT6) {
+ if (haldata->RegFwHwTxQCtrl&BIT(6)) {
DBG_88E("HalDownloadRSVDPage(): There is an Adapter is sending beacon.\n");
bSendBeacon = true;
}
/* Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. */
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl&(~BIT6)));
- haldata->RegFwHwTxQCtrl &= (~BIT6);
+ rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl&(~BIT(6))));
+ haldata->RegFwHwTxQCtrl &= (~BIT(6));
/* Clear beacon valid check bit. */
rtw_hal_set_hwreg(adapt, HW_VAR_BCN_VALID, NULL);
@@ -656,8 +656,8 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* the beacon cannot be sent by HW. */
/* 2010.06.23. Added by tynli. */
if (bSendBeacon) {
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl|BIT6));
- haldata->RegFwHwTxQCtrl |= BIT6;
+ rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl|BIT(6)));
+ haldata->RegFwHwTxQCtrl |= BIT(6);
}
/* Update RSVD page location H2C to Fw. */
@@ -668,7 +668,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
/* Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
- haldata->RegCR_1 &= (~BIT0);
+ haldata->RegCR_1 &= (~BIT(0));
rtw_write8(adapt, REG_CR+1, haldata->RegCR_1);
}
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index 732d42ab3e0d..588520d28097 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -351,7 +351,7 @@ void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter *Adapter, int data_len)
rtw_usleep_os(2);
loop = 0;
do {
- rstatus = (reg_140 = rtw_read32(Adapter, REG_PKTBUF_DBG_CTRL)&BIT24);
+ rstatus = (reg_140 = rtw_read32(Adapter, REG_PKTBUF_DBG_CTRL)&BIT(24));
if (rstatus) {
fifo_data = rtw_read32(Adapter, REG_PKTBUF_DBG_DATA_L);
memcpy(pbuf+(addr*8), &fifo_data, 4);
@@ -495,8 +495,8 @@ void _8051Reset88E(struct adapter *padapter)
u8 u1bTmp;
u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
- rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2));
- rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2));
+ rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT(2)));
+ rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT(2)));
DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n");
}
@@ -1077,7 +1077,7 @@ static u8 Hal_EfuseWordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr,
memset((void *)tmpdata, 0xff, PGPKT_DATA_SIZE);
- if (!(word_en&BIT0)) {
+ if (!(word_en&BIT(0))) {
tmpaddr = start_addr;
efuse_OneByteWrite(pAdapter, start_addr++, data[0], bPseudoTest);
efuse_OneByteWrite(pAdapter, start_addr++, data[1], bPseudoTest);
@@ -1085,9 +1085,9 @@ static u8 Hal_EfuseWordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr,
efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[0], bPseudoTest);
efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[1], bPseudoTest);
if ((data[0] != tmpdata[0]) || (data[1] != tmpdata[1]))
- badworden &= (~BIT0);
+ badworden &= (~BIT(0));
}
- if (!(word_en&BIT1)) {
+ if (!(word_en&BIT(1))) {
tmpaddr = start_addr;
efuse_OneByteWrite(pAdapter, start_addr++, data[2], bPseudoTest);
efuse_OneByteWrite(pAdapter, start_addr++, data[3], bPseudoTest);
@@ -1095,9 +1095,9 @@ static u8 Hal_EfuseWordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr,
efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[2], bPseudoTest);
efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[3], bPseudoTest);
if ((data[2] != tmpdata[2]) || (data[3] != tmpdata[3]))
- badworden &= (~BIT1);
+ badworden &= (~BIT(1));
}
- if (!(word_en&BIT2)) {
+ if (!(word_en&BIT(2))) {
tmpaddr = start_addr;
efuse_OneByteWrite(pAdapter, start_addr++, data[4], bPseudoTest);
efuse_OneByteWrite(pAdapter, start_addr++, data[5], bPseudoTest);
@@ -1105,9 +1105,9 @@ static u8 Hal_EfuseWordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr,
efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[4], bPseudoTest);
efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[5], bPseudoTest);
if ((data[4] != tmpdata[4]) || (data[5] != tmpdata[5]))
- badworden &= (~BIT2);
+ badworden &= (~BIT(2));
}
- if (!(word_en&BIT3)) {
+ if (!(word_en&BIT(3))) {
tmpaddr = start_addr;
efuse_OneByteWrite(pAdapter, start_addr++, data[6], bPseudoTest);
efuse_OneByteWrite(pAdapter, start_addr++, data[7], bPseudoTest);
@@ -1115,7 +1115,7 @@ static u8 Hal_EfuseWordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr,
efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[6], bPseudoTest);
efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[7], bPseudoTest);
if ((data[6] != tmpdata[6]) || (data[7] != tmpdata[7]))
- badworden &= (~BIT3);
+ badworden &= (~BIT(3));
}
return badworden;
}
@@ -1493,18 +1493,18 @@ static bool wordEnMatched(struct pgpkt *pTargetPkt, struct pgpkt *pCurPkt,
u8 match_word_en = 0x0F; /* default all words are disabled */
/* check if the same words are enabled both target and current PG packet */
- if (((pTargetPkt->word_en & BIT0) == 0) &&
- ((pCurPkt->word_en & BIT0) == 0))
- match_word_en &= ~BIT0; /* enable word 0 */
- if (((pTargetPkt->word_en & BIT1) == 0) &&
- ((pCurPkt->word_en & BIT1) == 0))
- match_word_en &= ~BIT1; /* enable word 1 */
- if (((pTargetPkt->word_en & BIT2) == 0) &&
- ((pCurPkt->word_en & BIT2) == 0))
- match_word_en &= ~BIT2; /* enable word 2 */
- if (((pTargetPkt->word_en & BIT3) == 0) &&
- ((pCurPkt->word_en & BIT3) == 0))
- match_word_en &= ~BIT3; /* enable word 3 */
+ if (((pTargetPkt->word_en & BIT(0)) == 0) &&
+ ((pCurPkt->word_en & BIT(0)) == 0))
+ match_word_en &= ~BIT(0); /* enable word 0 */
+ if (((pTargetPkt->word_en & BIT(1)) == 0) &&
+ ((pCurPkt->word_en & BIT(1)) == 0))
+ match_word_en &= ~BIT(1); /* enable word 1 */
+ if (((pTargetPkt->word_en & BIT(2)) == 0) &&
+ ((pCurPkt->word_en & BIT(2)) == 0))
+ match_word_en &= ~BIT(2); /* enable word 2 */
+ if (((pTargetPkt->word_en & BIT(3)) == 0) &&
+ ((pCurPkt->word_en & BIT(3)) == 0))
+ match_word_en &= ~BIT(3); /* enable word 3 */
*pWden = match_word_en;
@@ -1786,10 +1786,10 @@ static void hal_notch_filter_8188e(struct adapter *adapter, bool enable)
{
if (enable) {
DBG_88E("Enable notch filter\n");
- rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
+ rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT(1));
} else {
DBG_88E("Disable notch filter\n");
- rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
+ rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT(1));
}
}
void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc)
@@ -2008,7 +2008,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF;
} else {
pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
- if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -2016,7 +2016,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_OFDM_DIFF;
} else {
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
- if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
}
pwrInfo24G->CCK_Diff[rfPath][TxCount] = 0;
@@ -2026,7 +2026,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
- if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -2034,7 +2034,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
- if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
}
eeAddr++;
@@ -2043,7 +2043,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
- if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -2051,7 +2051,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
- if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0;
}
eeAddr++;
@@ -2121,13 +2121,13 @@ void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoL
/* hw power down mode selection , 0:rf-off / 1:power down */
if (padapter->registrypriv.hwpdn_mode == 2)
- padapter->pwrctrlpriv.bHWPowerdown = (hwinfo[EEPROM_RF_FEATURE_OPTION_88E] & BIT4);
+ padapter->pwrctrlpriv.bHWPowerdown = (hwinfo[EEPROM_RF_FEATURE_OPTION_88E] & BIT(4));
else
padapter->pwrctrlpriv.bHWPowerdown = padapter->registrypriv.hwpdn_mode;
/* decide hw if support remote wakeup function */
/* if hw supported, 8051 (SIE) will generate WeakUP signal(D+/D- toggle) when autoresume */
- padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT1) ? true : false;
+ padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT(1)) ? true : false;
DBG_88E("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) , bSupportRemoteWakeup(%x)\n", __func__,
padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown, padapter->pwrctrlpriv.bSupportRemoteWakeup);
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_mp.c b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
index f6d4029eae22..b5fb3aedc000 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_mp.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
@@ -400,11 +400,11 @@ void Hal_SetAntenna(struct adapter *pAdapter)
/* We need to close RFB by SW control */
if (pHalData->rf_type == RF_2T2R) {
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1);
- PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT(10), 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT(26), 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT(10), 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT(1), 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT(17), 0);
}
break;
case ANTENNA_B:
@@ -425,11 +425,11 @@ void Hal_SetAntenna(struct adapter *pAdapter)
/* 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table. */
/* 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control */
if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R) {
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1);
- PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT(10), 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT(10), 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT(26), 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT(1), 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT(17), 1);
}
break;
case ANTENNA_AB: /* For 8192S */
@@ -449,10 +449,10 @@ void Hal_SetAntenna(struct adapter *pAdapter)
/* cosa r_ant_select_ofdm_val = 0x3321333; */
/* 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control */
if (pHalData->rf_type == RF_2T2R) {
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
- PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT(10), 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT(26), 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT(1), 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT(17), 1);
}
break;
default:
@@ -527,7 +527,7 @@ s32 Hal_SetThermalMeter(struct adapter *pAdapter, u8 target_ther)
void Hal_TriggerRFThermalMeter(struct adapter *pAdapter)
{
- _write_rfreg(pAdapter, RF_PATH_A, RF_T_METER_88E, BIT17 | BIT16, 0x03);
+ _write_rfreg(pAdapter, RF_PATH_A, RF_T_METER_88E, BIT(17) | BIT(16), 0x03);
}
u8 Hal_ReadRFThermalMeter(struct adapter *pAdapter)
@@ -617,7 +617,7 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
if (is92C) {
- _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01);
+ _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT(19), 0x01);
rtw_usleep_os(100);
if (rfPath == RF_PATH_A)
write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); /* PAD all on. */
@@ -648,7 +648,7 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
if (is92C) {
- _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00);
+ _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT(19), 0x00);
rtw_usleep_os(100);
write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); /* PAD all on. */
write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); /* PAD all on. */
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
index 58d8e0113490..f7b6402e1cd2 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
@@ -178,9 +178,9 @@ phy_RFSerialRead(
udelay(10);/* PlatformStallExecution(10); */
if (eRFPath == RF_PATH_A)
- RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1, BIT8);
+ RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1, BIT(8));
else if (eRFPath == RF_PATH_B)
- RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1, BIT8);
+ RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1, BIT(8));
if (RfPiEnable) { /* Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF */
retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData);
@@ -582,7 +582,7 @@ PHY_BBConfig8188E(
/* Enable BB and RF */
RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN);
- rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1));
+ rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT(13)|BIT(0)|BIT(1)));
/* 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. */
@@ -1011,7 +1011,7 @@ _PHY_SetBWMode92C(
/* Set Control channel to upper or lower. These settings are required only for 40MHz */
PHY_SetBBReg(Adapter, rCCK0_System, bCCKSideBand, (pHalData->nCur40MhzPrimeSC>>1));
PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0xC00, pHalData->nCur40MhzPrimeSC);
- PHY_SetBBReg(Adapter, 0x818, (BIT26 | BIT27),
+ PHY_SetBBReg(Adapter, 0x818, (BIT(26) | BIT(27)),
(pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_led.c b/drivers/staging/r8188eu/hal/rtl8188eu_led.c
index 2c573e86d3f8..75ec97107add 100644
--- a/drivers/staging/r8188eu/hal/rtl8188eu_led.c
+++ b/drivers/staging/r8188eu/hal/rtl8188eu_led.c
@@ -20,10 +20,10 @@ void SwLedOn(struct adapter *padapter, struct LED_871x *pLed)
LedCfg = rtw_read8(padapter, REG_LEDCFG2);
switch (pLed->LedPin) {
case LED_PIN_LED0:
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /* SW control led0 on. */
+ rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT(5)|BIT(6)); /* SW control led0 on. */
break;
case LED_PIN_LED1:
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x0f)|BIT5); /* SW control led1 on. */
+ rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x0f)|BIT(5)); /* SW control led1 on. */
break;
default:
break;
@@ -48,17 +48,17 @@ void SwLedOff(struct adapter *padapter, struct LED_871x *pLed)
if (pHalData->bLedOpenDrain) {
/* Open-drain arrangement for controlling the LED) */
LedCfg &= 0x90; /* Set to software control. */
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
+ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT(3)));
LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG);
LedCfg &= 0xFE;
rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);
} else {
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6));
+ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT(3)|BIT(5)|BIT(6)));
}
break;
case LED_PIN_LED1:
LedCfg &= 0x0f; /* Set to software control. */
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
+ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT(3)));
break;
default:
break;
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index 2bce4334ba68..9305d97fd54d 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -611,7 +611,7 @@ static void _InitBeaconParameters(struct adapter *Adapter)
static void _BeaconFunctionEnable(struct adapter *Adapter,
bool Enable, bool Linked)
{
- rtw_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1));
+ rtw_write8(Adapter, REG_BCN_CTRL, (BIT(4) | BIT(3) | BIT(1)));
rtw_write8(Adapter, REG_RD_CTRL+1, 0x6F);
}
@@ -636,8 +636,8 @@ static void _InitAntenna_Selection(struct adapter *Adapter)
return;
DBG_88E("==> %s ....\n", __func__);
- rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0)|BIT23);
- PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
+ rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0)|BIT(23));
+ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT(13), 0x01);
if (PHY_QueryBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == Antenna_A)
haldata->CurAntenna = Antenna_A;
@@ -668,13 +668,13 @@ enum rt_rf_power_state RfOnOffDetect(struct adapter *adapt)
if (adapt->pwrctrlpriv.bHWPowerdown) {
val8 = rtw_read8(adapt, REG_HSISR);
- DBG_88E("pwrdown, 0x5c(BIT7)=%02x\n", val8);
- rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
+ DBG_88E("pwrdown, 0x5c(BIT(7))=%02x\n", val8);
+ rfpowerstate = (val8 & BIT(7)) ? rf_off : rf_on;
} else { /* rf on/off */
- rtw_write8(adapt, REG_MAC_PINMUX_CFG, rtw_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT3));
+ rtw_write8(adapt, REG_MAC_PINMUX_CFG, rtw_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT(3)));
val8 = rtw_read8(adapt, REG_GPIO_IO_SEL);
DBG_88E("GPIO_IN=%02x\n", val8);
- rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
+ rfpowerstate = (val8 & BIT(3)) ? rf_on : rf_off;
}
return rfpowerstate;
} /* HalDetectPwrDownMode */
@@ -836,7 +836,7 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
/* Enable TX Report */
/* Enable Tx Report Timer */
value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
- rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT1|BIT0));
+ rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT(1)|BIT(0)));
/* Set MAX RPT MACID */
rtw_write8(Adapter, REG_TX_RPT_CTRL+1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */
/* Tx RPT Timer. Unit: 32us */
@@ -965,7 +965,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
- rtw_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));
+ rtw_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT(1)));
/* stop rx */
rtw_write8(Adapter, REG_CR, 0x0);
@@ -989,16 +989,16 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* YJ,add,111212 */
/* Disable 32k */
val8 = rtw_read8(Adapter, REG_32K_CTRL);
- rtw_write8(Adapter, REG_32K_CTRL, val8&(~BIT0));
+ rtw_write8(Adapter, REG_32K_CTRL, val8&(~BIT(0)));
/* Card disable power action flow */
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
- rtw_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT3)));
+ rtw_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT(3))));
val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
- rtw_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3);
+ rtw_write8(Adapter, REG_RSV_CTRL+1, val8|BIT(3));
/* YJ,test add, 111207. For Power Consumption. */
val8 = rtw_read8(Adapter, GPIO_IN);
@@ -1016,7 +1016,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
static void rtl8192cu_hw_power_down(struct adapter *adapt)
{
/* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */
- /* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */
+ /* Then enable power down control bit of register 0x04 BIT(4) and BIT(15) as 1. */
/* Enable register area 0x0-0xc. */
rtw_write8(adapt, REG_RSV_CTRL, 0x0);
@@ -1235,10 +1235,10 @@ static void ResumeTxBeacon(struct adapter *adapt)
/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
/* which should be read from register to a global variable. */
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) | BIT6);
- haldata->RegFwHwTxQCtrl |= BIT6;
+ rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) | BIT(6));
+ haldata->RegFwHwTxQCtrl |= BIT(6);
rtw_write8(adapt, REG_TBTT_PROHIBIT+1, 0xff);
- haldata->RegReg542 |= BIT0;
+ haldata->RegReg542 |= BIT(0);
rtw_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
}
@@ -1249,10 +1249,10 @@ static void StopTxBeacon(struct adapter *adapt)
/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
/* which should be read from register to a global variable. */
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) & (~BIT6));
- haldata->RegFwHwTxQCtrl &= (~BIT6);
+ rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) & (~BIT(6)));
+ haldata->RegFwHwTxQCtrl &= (~BIT(6));
rtw_write8(adapt, REG_TBTT_PROHIBIT+1, 0x64);
- haldata->RegReg542 &= ~(BIT0);
+ haldata->RegReg542 &= ~(BIT(0));
rtw_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
/* todo: CheckFwRsvdPageContent(Adapter); 2010.06.23. Added by tynli. */
@@ -1303,7 +1303,7 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)
/* reset TSF */
rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
- /* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */
+ /* BIT(3) - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */
rtw_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM) | BIT(3) | BIT(4));
/* enable BCN0 Function for if1 */
@@ -1867,8 +1867,8 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
rtl8188e_set_FwMediaStatus_cmd(Adapter, (*(__le16 *)val));
break;
case HW_VAR_BCN_VALID:
- /* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */
- rtw_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0);
+ /* BCN_VALID, BIT(16) of REG_TDECTRL = BIT(0) of REG_TDECTRL+2, write 1 to clear, Clear by sw */
+ rtw_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT(0));
break;
default:
break;
@@ -1889,8 +1889,8 @@ static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
val[0] = rtw_read8(Adapter, REG_TXPAUSE);
break;
case HW_VAR_BCN_VALID:
- /* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2 */
- val[0] = (BIT0 & rtw_read8(Adapter, REG_TDECTRL+2)) ? true : false;
+ /* BCN_VALID, BIT(16) of REG_TDECTRL = BIT(0) of REG_TDECTRL+2 */
+ val[0] = (BIT(0) & rtw_read8(Adapter, REG_TDECTRL+2)) ? true : false;
break;
case HW_VAR_DM_FLAG:
val[0] = podmpriv->SupportAbility;
diff --git a/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
index 63b068fa9f4d..96888d66d28c 100644
--- a/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
+++ b/drivers/staging/r8188eu/include/Hal8188EPhyCfg.h
@@ -67,13 +67,13 @@ enum rf_radio_path {
enum wireless_mode {
WIRELESS_MODE_UNKNOWN = 0x00,
- WIRELESS_MODE_A = BIT2,
- WIRELESS_MODE_B = BIT0,
- WIRELESS_MODE_G = BIT1,
- WIRELESS_MODE_AUTO = BIT5,
- WIRELESS_MODE_N_24G = BIT3,
- WIRELESS_MODE_N_5G = BIT4,
- WIRELESS_MODE_AC = BIT6
+ WIRELESS_MODE_A = BIT(2),
+ WIRELESS_MODE_B = BIT(0),
+ WIRELESS_MODE_G = BIT(1),
+ WIRELESS_MODE_AUTO = BIT(5),
+ WIRELESS_MODE_N_24G = BIT(3),
+ WIRELESS_MODE_N_5G = BIT(4),
+ WIRELESS_MODE_AC = BIT(6)
};
enum phy_rate_tx_offset_area {
diff --git a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
index 43f41e77a939..a73bd1a5d57b 100644
--- a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
+++ b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
@@ -42,70 +42,70 @@
#define RTL8188E_TRANS_CARDEMU_TO_ACT \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1},/* wait till 0x04[17] = 1 power ready*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, /* 0x02[1:0] = 0 reset BB*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, /*0x04[8] = 1 polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, /*wait till 0x04[8] = 0*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*LDO normal mode*/ \
- {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*SDIO Driving*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},/* wait till 0x04[17] = 1 power ready*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0}, /* 0x02[1:0] = 0 reset BB*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, /*0x04[8] = 1 polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, /*wait till 0x04[8] = 0*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/ \
+ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/ \
#define RTL8188E_TRANS_ACT_TO_CARDEMU \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*LDO Sleep mode*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
#define RTL8188E_TRANS_CARDEMU_TO_SUS \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01enable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT7}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
- {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)}, /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
#define RTL8188E_TRANS_SUS_TO_CARDEMU \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
- {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
#define RTL8188E_TRANS_CARDEMU_TO_PDN \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/* 0x04[16] = 0*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7},/* 0x04[15] = 1*/
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/
#define RTL8188E_TRANS_PDN_TO_CARDEMU \
/* format */ \
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0},/* 0x04[15] = 0*/
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/
/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
#define RTL8188E_TRANS_ACT_TO_LPS \
@@ -116,11 +116,11 @@
{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/*CCK and OFDM are disabled,and clock are gated*/ \
{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/ \
{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/ \
- {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5},/*Respond TxOK to scheduler*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/ \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},/*Respond TxOK to scheduler*/ \
#define RTL8188E_TRANS_LPS_TO_ACT \
/* format */ \
@@ -129,12 +129,12 @@
{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\
{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\
{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*. 0x08[4] = 0 switch TSF to 40M*/\
- {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, /*Polling 0x109[7]=0 TSF in 40M*/\
- {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, /*. 0x29[7:6] = 2b'00 enable BB clock*/\
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*. 0x101[1] = 1*/\
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*. 0x08[4] = 0 switch TSF to 40M*/\
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, /*Polling 0x109[7]=0 TSF in 40M*/\
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, /*. 0x29[7:6] = 2b'00 enable BB clock*/\
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, /*. 0x101[1] = 1*/\
{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, /*. 0x02[1:0] = 2b'11 enable BB macro*/\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)}, /*. 0x02[1:0] = 2b'11 enable BB macro*/\
{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
#define RTL8188E_TRANS_END \
diff --git a/drivers/staging/r8188eu/include/hal_intf.h b/drivers/staging/r8188eu/include/hal_intf.h
index 8f62cbe9ba37..37ddb9745350 100644
--- a/drivers/staging/r8188eu/include/hal_intf.h
+++ b/drivers/staging/r8188eu/include/hal_intf.h
@@ -9,10 +9,10 @@
#include "Hal8188EPhyCfg.h"
enum RTL871X_HCI_TYPE {
- RTW_PCIE = BIT0,
- RTW_USB = BIT1,
- RTW_SDIO = BIT2,
- RTW_GSPI = BIT3,
+ RTW_PCIE = BIT(0),
+ RTW_USB = BIT(1),
+ RTW_SDIO = BIT(2),
+ RTW_GSPI = BIT(3),
};
enum _CHIP_TYPE {
@@ -264,10 +264,10 @@ enum rt_eeprom_type {
};
#define RF_CHANGE_BY_INIT 0
-#define RF_CHANGE_BY_IPS BIT28
-#define RF_CHANGE_BY_PS BIT29
-#define RF_CHANGE_BY_HW BIT30
-#define RF_CHANGE_BY_SW BIT31
+#define RF_CHANGE_BY_IPS BIT(28)
+#define RF_CHANGE_BY_PS BIT(29)
+#define RF_CHANGE_BY_HW BIT(30)
+#define RF_CHANGE_BY_SW BIT(31)
enum hardware_type {
HARDWARE_TYPE_RTL8180,
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
index 2a6fd4072e00..a1f8c7fe595c 100644
--- a/drivers/staging/r8188eu/include/odm.h
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -409,28 +409,28 @@ enum odm_common_info_def {
enum odm_ability_def {
/* BB ODM section BIT 0-15 */
- ODM_BB_DIG = BIT0,
- ODM_BB_RA_MASK = BIT1,
- ODM_BB_DYNAMIC_TXPWR = BIT2,
- ODM_BB_FA_CNT = BIT3,
- ODM_BB_RSSI_MONITOR = BIT4,
- ODM_BB_CCK_PD = BIT5,
- ODM_BB_ANT_DIV = BIT6,
- ODM_BB_PWR_SAVE = BIT7,
- ODM_BB_PWR_TRA = BIT8,
- ODM_BB_RATE_ADAPTIVE = BIT9,
- ODM_BB_PATH_DIV = BIT10,
- ODM_BB_PSD = BIT11,
- ODM_BB_RXHP = BIT12,
+ ODM_BB_DIG = BIT(0),
+ ODM_BB_RA_MASK = BIT(1),
+ ODM_BB_DYNAMIC_TXPWR = BIT(2),
+ ODM_BB_FA_CNT = BIT(3),
+ ODM_BB_RSSI_MONITOR = BIT(4),
+ ODM_BB_CCK_PD = BIT(5),
+ ODM_BB_ANT_DIV = BIT(6),
+ ODM_BB_PWR_SAVE = BIT(7),
+ ODM_BB_PWR_TRA = BIT(8),
+ ODM_BB_RATE_ADAPTIVE = BIT(9),
+ ODM_BB_PATH_DIV = BIT(10),
+ ODM_BB_PSD = BIT(11),
+ ODM_BB_RXHP = BIT(12),
/* MAC DM section BIT 16-23 */
- ODM_MAC_EDCA_TURBO = BIT16,
- ODM_MAC_EARLY_MODE = BIT17,
+ ODM_MAC_EDCA_TURBO = BIT(16),
+ ODM_MAC_EARLY_MODE = BIT(17),
/* RF ODM section BIT 24-31 */
- ODM_RF_TX_PWR_TRACK = BIT24,
- ODM_RF_RX_GAIN_TRACK = BIT25,
- ODM_RF_CALIBRATION = BIT26,
+ ODM_RF_TX_PWR_TRACK = BIT(24),
+ ODM_RF_RX_GAIN_TRACK = BIT(25),
+ ODM_RF_CALIBRATION = BIT(26),
};
/* ODM_CMNINFO_INTERFACE */
@@ -443,13 +443,13 @@ enum odm_interface_def {
/* ODM_CMNINFO_IC_TYPE */
enum odm_ic_type {
- ODM_RTL8192S = BIT0,
- ODM_RTL8192C = BIT1,
- ODM_RTL8192D = BIT2,
- ODM_RTL8723A = BIT3,
- ODM_RTL8188E = BIT4,
- ODM_RTL8812 = BIT5,
- ODM_RTL8821 = BIT6,
+ ODM_RTL8192S = BIT(0),
+ ODM_RTL8192C = BIT(1),
+ ODM_RTL8192D = BIT(2),
+ ODM_RTL8723A = BIT(3),
+ ODM_RTL8188E = BIT(4),
+ ODM_RTL8812 = BIT(5),
+ ODM_RTL8821 = BIT(6),
};
#define ODM_IC_11N_SERIES \
@@ -475,16 +475,16 @@ enum odm_fab_Version {
};
/* ODM_CMNINFO_RF_TYPE */
-/* For example 1T2R (A+AB = BIT0|BIT4|BIT5) */
+/* For example 1T2R (A+AB = BIT(0)|BIT(4)|BIT(5)) */
enum odm_rf_path {
- ODM_RF_TX_A = BIT0,
- ODM_RF_TX_B = BIT1,
- ODM_RF_TX_C = BIT2,
- ODM_RF_TX_D = BIT3,
- ODM_RF_RX_A = BIT4,
- ODM_RF_RX_B = BIT5,
- ODM_RF_RX_C = BIT6,
- ODM_RF_RX_D = BIT7,
+ ODM_RF_TX_A = BIT(0),
+ ODM_RF_TX_B = BIT(1),
+ ODM_RF_TX_C = BIT(2),
+ ODM_RF_TX_D = BIT(3),
+ ODM_RF_RX_A = BIT(4),
+ ODM_RF_RX_B = BIT(5),
+ ODM_RF_RX_C = BIT(6),
+ ODM_RF_RX_D = BIT(7),
};
enum odm_rf_type {
@@ -515,33 +515,33 @@ enum odm_bt_coexist {
/* ODM_CMNINFO_OP_MODE */
enum odm_operation_mode {
- ODM_NO_LINK = BIT0,
- ODM_LINK = BIT1,
- ODM_SCAN = BIT2,
- ODM_POWERSAVE = BIT3,
- ODM_AP_MODE = BIT4,
- ODM_CLIENT_MODE = BIT5,
- ODM_AD_HOC = BIT6,
- ODM_WIFI_DIRECT = BIT7,
- ODM_WIFI_DISPLAY = BIT8,
+ ODM_NO_LINK = BIT(0),
+ ODM_LINK = BIT(1),
+ ODM_SCAN = BIT(2),
+ ODM_POWERSAVE = BIT(3),
+ ODM_AP_MODE = BIT(4),
+ ODM_CLIENT_MODE = BIT(5),
+ ODM_AD_HOC = BIT(6),
+ ODM_WIFI_DIRECT = BIT(7),
+ ODM_WIFI_DISPLAY = BIT(8),
};
/* ODM_CMNINFO_WM_MODE */
enum odm_wireless_mode {
ODM_WM_UNKNOW = 0x0,
- ODM_WM_B = BIT0,
- ODM_WM_G = BIT1,
- ODM_WM_A = BIT2,
- ODM_WM_N24G = BIT3,
- ODM_WM_N5G = BIT4,
- ODM_WM_AUTO = BIT5,
- ODM_WM_AC = BIT6,
+ ODM_WM_B = BIT(0),
+ ODM_WM_G = BIT(1),
+ ODM_WM_A = BIT(2),
+ ODM_WM_N24G = BIT(3),
+ ODM_WM_N5G = BIT(4),
+ ODM_WM_AUTO = BIT(5),
+ ODM_WM_AC = BIT(6),
};
/* ODM_CMNINFO_BAND */
enum odm_band_type {
- ODM_BAND_2_4G = BIT0,
- ODM_BAND_5G = BIT1,
+ ODM_BAND_2_4G = BIT(0),
+ ODM_BAND_5G = BIT(1),
};
/* ODM_CMNINFO_SEC_CHNL_OFFSET */
@@ -801,7 +801,7 @@ struct odm_dm_struct {
u64 *pNumTxBytesUnicast;
/* RX Unicast byte count */
u64 *pNumRxBytesUnicast;
- /* Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3 */
+ /* Wireless mode B/G/A/N = BIT(0)/BIT(1)/BIT(2)/BIT(3) */
u8 *pWirelessMode; /* ODM_WIRELESS_MODE_E */
/* Frequence band 2.4G/5G = 0/1 */
u8 *pBandType;
diff --git a/drivers/staging/r8188eu/include/odm_reg.h b/drivers/staging/r8188eu/include/odm_reg.h
index 81e633fcc0ac..78d7e904947c 100644
--- a/drivers/staging/r8188eu/include/odm_reg.h
+++ b/drivers/staging/r8188eu/include/odm_reg.h
@@ -84,6 +84,6 @@
/* Bitmap Definition */
/* */
-#define BIT_FA_RESET BIT0
+#define BIT_FA_RESET BIT(0)
#endif
diff --git a/drivers/staging/r8188eu/include/odm_types.h b/drivers/staging/r8188eu/include/odm_types.h
index 53a2fee55e35..6f4a4bd37ec1 100644
--- a/drivers/staging/r8188eu/include/odm_types.h
+++ b/drivers/staging/r8188eu/include/odm_types.h
@@ -7,10 +7,10 @@
/* */
/* Define Different SW team support */
/* */
-#define ODM_AP 0x01 /* BIT0 */
-#define ODM_ADSL 0x02 /* BIT1 */
-#define ODM_CE 0x04 /* BIT2 */
-#define ODM_MP 0x08 /* BIT3 */
+#define ODM_AP 0x01 /* BIT(0) */
+#define ODM_ADSL 0x02 /* BIT(1) */
+#define ODM_CE 0x04 /* BIT(2) */
+#define ODM_MP 0x08 /* BIT(3) */
#define RT_PCI_INTERFACE 1
#define RT_USB_INTERFACE 2
diff --git a/drivers/staging/r8188eu/include/osdep_service.h b/drivers/staging/r8188eu/include/osdep_service.h
index 7e002009f9a0..6399f645cd40 100644
--- a/drivers/staging/r8188eu/include/osdep_service.h
+++ b/drivers/staging/r8188eu/include/osdep_service.h
@@ -143,48 +143,6 @@ static inline void rtw_netif_stop_queue(struct net_device *pnetdev)
netif_tx_stop_all_queues(pnetdev);
}
-#ifndef BIT
- #define BIT(x) ( 1 << (x))
-#endif
-
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-#define BIT32 0x0100000000
-#define BIT33 0x0200000000
-#define BIT34 0x0400000000
-#define BIT35 0x0800000000
-#define BIT36 0x1000000000
-
extern int RTW_STATUS_CODE(int error_code);
/* flags used for rtw_update_mem_stat() */
diff --git a/drivers/staging/r8188eu/include/rtl8188e_spec.h b/drivers/staging/r8188eu/include/rtl8188e_spec.h
index 85e66d6ca2ba..5fdc6aac917c 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_spec.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_spec.h
@@ -4,43 +4,6 @@
#ifndef __RTL8188E_SPEC_H__
#define __RTL8188E_SPEC_H__
-#ifndef BIT
-#define BIT(x) (1 << (x))
-#endif
-
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
/* 8192C Regsiter offset definition */
#define HAL_PS_TIMER_INT_DELAY 50 /* 50 microseconds */
@@ -465,14 +428,14 @@
#define MAX_MSS_DENSITY_1T 0x0A
/* EEPROM enable when set 1 */
-#define CmdEEPROM_En BIT5
+#define CmdEEPROM_En BIT(5)
/* System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 */
-#define CmdEERPOMSEL BIT4
-#define Cmd9346CR_9356SEL BIT4
+#define CmdEERPOMSEL BIT(4)
+#define Cmd9346CR_9356SEL BIT(4)
/* 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) */
#define GPIOSEL_GPIO 0
-#define GPIOSEL_ENBT BIT5
+#define GPIOSEL_ENBT BIT(5)
/* 8192C GPIO PIN Control Register (offset 0x44, 4 byte) */
/* GPIO pins input value */
@@ -485,18 +448,18 @@
#define GPIO_MOD (REG_GPIO_PIN_CTRL+3)
/* 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) */
-#define HSIMR_GPIO12_0_INT_EN BIT0
-#define HSIMR_SPS_OCP_INT_EN BIT5
-#define HSIMR_RON_INT_EN BIT6
-#define HSIMR_PDN_INT_EN BIT7
-#define HSIMR_GPIO9_INT_EN BIT25
+#define HSIMR_GPIO12_0_INT_EN BIT(0)
+#define HSIMR_SPS_OCP_INT_EN BIT(5)
+#define HSIMR_RON_INT_EN BIT(6)
+#define HSIMR_PDN_INT_EN BIT(7)
+#define HSIMR_GPIO9_INT_EN BIT(25)
/* 8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) */
-#define HSISR_GPIO12_0_INT BIT0
-#define HSISR_SPS_OCP_INT BIT5
-#define HSISR_RON_INT_EN BIT6
-#define HSISR_PDNINT BIT7
-#define HSISR_GPIO9_INT BIT25
+#define HSISR_GPIO12_0_INT BIT(0)
+#define HSISR_SPS_OCP_INT BIT(5)
+#define HSISR_RON_INT_EN BIT(6)
+#define HSISR_PDNINT BIT(7)
+#define HSISR_GPIO9_INT BIT(25)
/* 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) */
/*
@@ -521,51 +484,51 @@ Default: 00b.
/* 88E Driver Initialization Offload REG_FDHM0(Offset 0x88, 8 bits) */
/* IOL config for REG_FDHM0(Reg0x88) */
-#define CMD_INIT_LLT BIT0
-#define CMD_READ_EFUSE_MAP BIT1
-#define CMD_EFUSE_PATCH BIT2
-#define CMD_IOCONFIG BIT3
-#define CMD_INIT_LLT_ERR BIT4
-#define CMD_READ_EFUSE_MAP_ERR BIT5
-#define CMD_EFUSE_PATCH_ERR BIT6
-#define CMD_IOCONFIG_ERR BIT7
+#define CMD_INIT_LLT BIT(0)
+#define CMD_READ_EFUSE_MAP BIT(1)
+#define CMD_EFUSE_PATCH BIT(2)
+#define CMD_IOCONFIG BIT(3)
+#define CMD_INIT_LLT_ERR BIT(4)
+#define CMD_READ_EFUSE_MAP_ERR BIT(5)
+#define CMD_EFUSE_PATCH_ERR BIT(6)
+#define CMD_IOCONFIG_ERR BIT(7)
/* 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) */
/* 8192C Response Rate Set Register (offset 0x181, 24bits) */
-#define RRSR_1M BIT0
-#define RRSR_2M BIT1
-#define RRSR_5_5M BIT2
-#define RRSR_11M BIT3
-#define RRSR_6M BIT4
-#define RRSR_9M BIT5
-#define RRSR_12M BIT6
-#define RRSR_18M BIT7
-#define RRSR_24M BIT8
-#define RRSR_36M BIT9
-#define RRSR_48M BIT10
-#define RRSR_54M BIT11
-#define RRSR_MCS0 BIT12
-#define RRSR_MCS1 BIT13
-#define RRSR_MCS2 BIT14
-#define RRSR_MCS3 BIT15
-#define RRSR_MCS4 BIT16
-#define RRSR_MCS5 BIT17
-#define RRSR_MCS6 BIT18
-#define RRSR_MCS7 BIT19
+#define RRSR_1M BIT(0)
+#define RRSR_2M BIT(1)
+#define RRSR_5_5M BIT(2)
+#define RRSR_11M BIT(3)
+#define RRSR_6M BIT(4)
+#define RRSR_9M BIT(5)
+#define RRSR_12M BIT(6)
+#define RRSR_18M BIT(7)
+#define RRSR_24M BIT(8)
+#define RRSR_36M BIT(9)
+#define RRSR_48M BIT(10)
+#define RRSR_54M BIT(11)
+#define RRSR_MCS0 BIT(12)
+#define RRSR_MCS1 BIT(13)
+#define RRSR_MCS2 BIT(14)
+#define RRSR_MCS3 BIT(15)
+#define RRSR_MCS4 BIT(16)
+#define RRSR_MCS5 BIT(17)
+#define RRSR_MCS6 BIT(18)
+#define RRSR_MCS7 BIT(19)
/* 8192C Response Rate Set Register (offset 0x1BF, 8bits) */
/* WOL bit information */
-#define HAL92C_WOL_PTK_UPDATE_EVENT BIT0
-#define HAL92C_WOL_GTK_UPDATE_EVENT BIT1
+#define HAL92C_WOL_PTK_UPDATE_EVENT BIT(0)
+#define HAL92C_WOL_GTK_UPDATE_EVENT BIT(1)
/* 8192C BW_OPMODE bits (Offset 0x203, 8bit) */
-#define BW_OPMODE_20MHZ BIT2
-#define BW_OPMODE_5G BIT1
+#define BW_OPMODE_20MHZ BIT(2)
+#define BW_OPMODE_5G BIT(1)
/* 8192C CAM Config Setting (offset 0x250, 1 byte) */
-#define CAM_VALID BIT15
+#define CAM_VALID BIT(15)
#define CAM_NOTVALID 0x0000
-#define CAM_USEDK BIT5
+#define CAM_USEDK BIT(5)
#define CAM_CONTENT_COUNT 8
@@ -582,69 +545,69 @@ Default: 00b.
#define CAM_CONFIG_USEDK true
#define CAM_CONFIG_NO_USEDK false
-#define CAM_WRITE BIT16
+#define CAM_WRITE BIT(16)
#define CAM_READ 0x00000000
-#define CAM_POLLINIG BIT31
+#define CAM_POLLINIG BIT(31)
#define SCR_UseDK 0x01
#define SCR_TxSecEnable 0x02
#define SCR_RxSecEnable 0x04
/* 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF) */
-#define WOW_PMEN BIT0 /* Power management Enable. */
-#define WOW_WOMEN BIT1 /* WoW function on or off. */
-#define WOW_MAGIC BIT2 /* Magic packet */
-#define WOW_UWF BIT3 /* Unicast Wakeup frame. */
+#define WOW_PMEN BIT(0) /* Power management Enable. */
+#define WOW_WOMEN BIT(1) /* WoW function on or off. */
+#define WOW_MAGIC BIT(2) /* Magic packet */
+#define WOW_UWF BIT(3) /* Unicast Wakeup frame. */
/* 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) */
/* 8188 IMR/ISR bits */
#define IMR_DISABLED_88E 0x0
/* IMR DW0(0x0060-0063) Bit 0-31 */
-#define IMR_TXCCK_88E BIT30 /* TXRPT interrupt when CCX bit of the packet is set */
-#define IMR_PSTIMEOUT_88E BIT29 /* Power Save Time Out Interrupt */
-#define IMR_GTINT4_88E BIT28 /* When GTIMER4 expires, this bit is set to 1 */
-#define IMR_GTINT3_88E BIT27 /* When GTIMER3 expires, this bit is set to 1 */
-#define IMR_TBDER_88E BIT26 /* Transmit Beacon0 Error */
-#define IMR_TBDOK_88E BIT25 /* Transmit Beacon0 OK */
-#define IMR_TSF_BIT32_TOGGLE_88E BIT24 /* TSF Timer BIT32 toggle indication interrupt */
-#define IMR_BCNDMAINT0_88E BIT20 /* Beacon DMA Interrupt 0 */
-#define IMR_BCNDERR0_88E BIT16 /* Beacon Queue DMA Error 0 */
-#define IMR_HSISR_IND_ON_INT_88E BIT15 /* HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) */
-#define IMR_BCNDMAINT_E_88E BIT14 /* Beacon DMA Interrupt Extension for Win7 */
-#define IMR_ATIMEND_88E BIT12 /* CTWidnow End or ATIM Window End */
-#define IMR_HISR1_IND_INT_88E BIT11 /* HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) */
-#define IMR_C2HCMD_88E BIT10 /* CPU to Host Command INT Status, Write 1 clear */
-#define IMR_CPWM2_88E BIT9 /* CPU power Mode exchange INT Status, Write 1 clear */
-#define IMR_CPWM_88E BIT8 /* CPU power Mode exchange INT Status, Write 1 clear */
-#define IMR_HIGHDOK_88E BIT7 /* High Queue DMA OK */
-#define IMR_MGNTDOK_88E BIT6 /* Management Queue DMA OK */
-#define IMR_BKDOK_88E BIT5 /* AC_BK DMA OK */
-#define IMR_BEDOK_88E BIT4 /* AC_BE DMA OK */
-#define IMR_VIDOK_88E BIT3 /* AC_VI DMA OK */
-#define IMR_VODOK_88E BIT2 /* AC_VO DMA OK */
-#define IMR_RDU_88E BIT1 /* Rx Descriptor Unavailable */
-#define IMR_ROK_88E BIT0 /* Receive DMA OK */
+#define IMR_TXCCK_88E BIT(30) /* TXRPT interrupt when CCX bit of the packet is set */
+#define IMR_PSTIMEOUT_88E BIT(29) /* Power Save Time Out Interrupt */
+#define IMR_GTINT4_88E BIT(28) /* When GTIMER4 expires, this bit is set to 1 */
+#define IMR_GTINT3_88E BIT(27) /* When GTIMER3 expires, this bit is set to 1 */
+#define IMR_TBDER_88E BIT(26) /* Transmit Beacon0 Error */
+#define IMR_TBDOK_88E BIT(25) /* Transmit Beacon0 OK */
+#define IMR_TSF_BIT32_TOGGLE_88E BIT(24) /* TSF Timer BIT32 toggle indication interrupt */
+#define IMR_BCNDMAINT0_88E BIT(20) /* Beacon DMA Interrupt 0 */
+#define IMR_BCNDERR0_88E BIT(16) /* Beacon Queue DMA Error 0 */
+#define IMR_HSISR_IND_ON_INT_88E BIT(15) /* HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) */
+#define IMR_BCNDMAINT_E_88E BIT(14) /* Beacon DMA Interrupt Extension for Win7 */
+#define IMR_ATIMEND_88E BIT(12) /* CTWidnow End or ATIM Window End */
+#define IMR_HISR1_IND_INT_88E BIT(11) /* HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) */
+#define IMR_C2HCMD_88E BIT(10) /* CPU to Host Command INT Status, Write 1 clear */
+#define IMR_CPWM2_88E BIT(9) /* CPU power Mode exchange INT Status, Write 1 clear */
+#define IMR_CPWM_88E BIT(8) /* CPU power Mode exchange INT Status, Write 1 clear */
+#define IMR_HIGHDOK_88E BIT(7) /* High Queue DMA OK */
+#define IMR_MGNTDOK_88E BIT(6) /* Management Queue DMA OK */
+#define IMR_BKDOK_88E BIT(5) /* AC_BK DMA OK */
+#define IMR_BEDOK_88E BIT(4) /* AC_BE DMA OK */
+#define IMR_VIDOK_88E BIT(3) /* AC_VI DMA OK */
+#define IMR_VODOK_88E BIT(2) /* AC_VO DMA OK */
+#define IMR_RDU_88E BIT(1) /* Rx Descriptor Unavailable */
+#define IMR_ROK_88E BIT(0) /* Receive DMA OK */
/* IMR DW1(0x00B4-00B7) Bit 0-31 */
-#define IMR_BCNDMAINT7_88E BIT27 /* Beacon DMA Interrupt 7 */
-#define IMR_BCNDMAINT6_88E BIT26 /* Beacon DMA Interrupt 6 */
-#define IMR_BCNDMAINT5_88E BIT25 /* Beacon DMA Interrupt 5 */
-#define IMR_BCNDMAINT4_88E BIT24 /* Beacon DMA Interrupt 4 */
-#define IMR_BCNDMAINT3_88E BIT23 /* Beacon DMA Interrupt 3 */
-#define IMR_BCNDMAINT2_88E BIT22 /* Beacon DMA Interrupt 2 */
-#define IMR_BCNDMAINT1_88E BIT21 /* Beacon DMA Interrupt 1 */
-#define IMR_BCNDERR7_88E BIT20 /* Beacon DMA Error Int 7 */
-#define IMR_BCNDERR6_88E BIT19 /* Beacon DMA Error Int 6 */
-#define IMR_BCNDERR5_88E BIT18 /* Beacon DMA Error Int 5 */
-#define IMR_BCNDERR4_88E BIT17 /* Beacon DMA Error Int 4 */
-#define IMR_BCNDERR3_88E BIT16 /* Beacon DMA Error Int 3 */
-#define IMR_BCNDERR2_88E BIT15 /* Beacon DMA Error Int 2 */
-#define IMR_BCNDERR1_88E BIT14 /* Beacon DMA Error Int 1 */
-#define IMR_ATIMEND_E_88E BIT13 /* ATIM Window End Ext for Win7 */
-#define IMR_TXERR_88E BIT11 /* Tx Err Flag Int Status, write 1 clear. */
-#define IMR_RXERR_88E BIT10 /* Rx Err Flag INT Status, Write 1 clear */
-#define IMR_TXFOVW_88E BIT9 /* Transmit FIFO Overflow */
-#define IMR_RXFOVW_88E BIT8 /* Receive FIFO Overflow */
+#define IMR_BCNDMAINT7_88E BIT(27) /* Beacon DMA Interrupt 7 */
+#define IMR_BCNDMAINT6_88E BIT(26) /* Beacon DMA Interrupt 6 */
+#define IMR_BCNDMAINT5_88E BIT(25) /* Beacon DMA Interrupt 5 */
+#define IMR_BCNDMAINT4_88E BIT(24) /* Beacon DMA Interrupt 4 */
+#define IMR_BCNDMAINT3_88E BIT(23) /* Beacon DMA Interrupt 3 */
+#define IMR_BCNDMAINT2_88E BIT(22) /* Beacon DMA Interrupt 2 */
+#define IMR_BCNDMAINT1_88E BIT(21) /* Beacon DMA Interrupt 1 */
+#define IMR_BCNDERR7_88E BIT(20) /* Beacon DMA Error Int 7 */
+#define IMR_BCNDERR6_88E BIT(19) /* Beacon DMA Error Int 6 */
+#define IMR_BCNDERR5_88E BIT(18) /* Beacon DMA Error Int 5 */
+#define IMR_BCNDERR4_88E BIT(17) /* Beacon DMA Error Int 4 */
+#define IMR_BCNDERR3_88E BIT(16) /* Beacon DMA Error Int 3 */
+#define IMR_BCNDERR2_88E BIT(15) /* Beacon DMA Error Int 2 */
+#define IMR_BCNDERR1_88E BIT(14) /* Beacon DMA Error Int 1 */
+#define IMR_ATIMEND_E_88E BIT(13) /* ATIM Window End Ext for Win7 */
+#define IMR_TXERR_88E BIT(11) /* Tx Err Flag Int Status, write 1 clear. */
+#define IMR_RXERR_88E BIT(10) /* Rx Err Flag INT Status, Write 1 clear */
+#define IMR_TXFOVW_88E BIT(9) /* Transmit FIFO Overflow */
+#define IMR_RXFOVW_88E BIT(8) /* Receive FIFO Overflow */
#define HAL_NIC_UNPLUG_ISR 0xFFFFFFFF /* The value when the NIC is unplugged for PCI. */
@@ -680,40 +643,40 @@ Current IOREG MAP
/* the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2,
* and BK - Bit3. */
/* 8723 and 88E may be not correct either in the earlier version. */
-#define StopBecon BIT6
-#define StopHigh BIT5
-#define StopMgt BIT4
-#define StopBK BIT3
-#define StopBE BIT2
-#define StopVI BIT1
-#define StopVO BIT0
+#define StopBecon BIT(6)
+#define StopHigh BIT(5)
+#define StopMgt BIT(4)
+#define StopBK BIT(3)
+#define StopBE BIT(2)
+#define StopVI BIT(1)
+#define StopVO BIT(0)
/* 8192C (RCR) Receive Configuration Register(Offset 0x608, 32 bits) */
-#define RCR_APPFCS BIT31 /* WMAC append FCS after payload */
-#define RCR_APP_MIC BIT30
-#define RCR_APP_PHYSTS BIT28
-#define RCR_APP_ICV BIT29
-#define RCR_APP_PHYST_RXFF BIT28
-#define RCR_APP_BA_SSN BIT27 /* Accept BA SSN */
-#define RCR_ENMBID BIT24 /* Enable Multiple BssId. */
-#define RCR_LSIGEN BIT23
-#define RCR_MFBEN BIT22
-#define RCR_HTC_LOC_CTRL BIT14 /* MFC<--HTC=1 MFC-->HTC=0 */
-#define RCR_AMF BIT13 /* Accept management type frame */
-#define RCR_ACF BIT12 /* Accept control type frame */
-#define RCR_ADF BIT11 /* Accept data type frame */
-#define RCR_AICV BIT9 /* Accept ICV error packet */
-#define RCR_ACRC32 BIT8 /* Accept CRC32 error packet */
-#define RCR_CBSSID_BCN BIT7 /* Accept BSSID match packet
+#define RCR_APPFCS BIT(31) /* WMAC append FCS after payload */
+#define RCR_APP_MIC BIT(30)
+#define RCR_APP_PHYSTS BIT(28)
+#define RCR_APP_ICV BIT(29)
+#define RCR_APP_PHYST_RXFF BIT(28)
+#define RCR_APP_BA_SSN BIT(27) /* Accept BA SSN */
+#define RCR_ENMBID BIT(24) /* Enable Multiple BssId. */
+#define RCR_LSIGEN BIT(23)
+#define RCR_MFBEN BIT(22)
+#define RCR_HTC_LOC_CTRL BIT(14) /* MFC<--HTC=1 MFC-->HTC=0 */
+#define RCR_AMF BIT(13) /* Accept management type frame */
+#define RCR_ACF BIT(12) /* Accept control type frame */
+#define RCR_ADF BIT(11) /* Accept data type frame */
+#define RCR_AICV BIT(9) /* Accept ICV error packet */
+#define RCR_ACRC32 BIT(8) /* Accept CRC32 error packet */
+#define RCR_CBSSID_BCN BIT(7) /* Accept BSSID match packet
* (Rx beacon, probe rsp) */
-#define RCR_CBSSID_DATA BIT6 /* Accept BSSID match (Data)*/
+#define RCR_CBSSID_DATA BIT(6) /* Accept BSSID match (Data)*/
#define RCR_CBSSID RCR_CBSSID_DATA /* Accept BSSID match */
-#define RCR_APWRMGT BIT5 /* Accept power management pkt*/
-#define RCR_ADD3 BIT4 /* Accept address 3 match pkt */
-#define RCR_AB BIT3 /* Accept broadcast packet */
-#define RCR_AM BIT2 /* Accept multicast packet */
-#define RCR_APM BIT1 /* Accept physical match pkt */
-#define RCR_AAP BIT0 /* Accept all unicast packet */
+#define RCR_APWRMGT BIT(5) /* Accept power management pkt*/
+#define RCR_ADD3 BIT(4) /* Accept address 3 match pkt */
+#define RCR_AB BIT(3) /* Accept broadcast packet */
+#define RCR_AM BIT(2) /* Accept multicast packet */
+#define RCR_APM BIT(1) /* Accept physical match pkt */
+#define RCR_AAP BIT(0) /* Accept all unicast packet */
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
@@ -1181,56 +1144,56 @@ Current IOREG MAP
#define SDIO_HIMR_DISABLED 0
/* RTL8188E SDIO Host Interrupt Mask Register */
-#define SDIO_HIMR_RX_REQUEST_MSK BIT0
-#define SDIO_HIMR_AVAL_MSK BIT1
-#define SDIO_HIMR_TXERR_MSK BIT2
-#define SDIO_HIMR_RXERR_MSK BIT3
-#define SDIO_HIMR_TXFOVW_MSK BIT4
-#define SDIO_HIMR_RXFOVW_MSK BIT5
-#define SDIO_HIMR_TXBCNOK_MSK BIT6
-#define SDIO_HIMR_TXBCNERR_MSK BIT7
-#define SDIO_HIMR_BCNERLY_INT_MSK BIT16
-#define SDIO_HIMR_C2HCMD_MSK BIT17
-#define SDIO_HIMR_CPWM1_MSK BIT18
-#define SDIO_HIMR_CPWM2_MSK BIT19
-#define SDIO_HIMR_HSISR_IND_MSK BIT20
-#define SDIO_HIMR_GTINT3_IND_MSK BIT21
-#define SDIO_HIMR_GTINT4_IND_MSK BIT22
-#define SDIO_HIMR_PSTIMEOUT_MSK BIT23
-#define SDIO_HIMR_OCPINT_MSK BIT24
-#define SDIO_HIMR_ATIMEND_MSK BIT25
-#define SDIO_HIMR_ATIMEND_E_MSK BIT26
-#define SDIO_HIMR_CTWEND_MSK BIT27
+#define SDIO_HIMR_RX_REQUEST_MSK BIT(0)
+#define SDIO_HIMR_AVAL_MSK BIT(1)
+#define SDIO_HIMR_TXERR_MSK BIT(2)
+#define SDIO_HIMR_RXERR_MSK BIT(3)
+#define SDIO_HIMR_TXFOVW_MSK BIT(4)
+#define SDIO_HIMR_RXFOVW_MSK BIT(5)
+#define SDIO_HIMR_TXBCNOK_MSK BIT(6)
+#define SDIO_HIMR_TXBCNERR_MSK BIT(7)
+#define SDIO_HIMR_BCNERLY_INT_MSK BIT(16)
+#define SDIO_HIMR_C2HCMD_MSK BIT(17)
+#define SDIO_HIMR_CPWM1_MSK BIT(18)
+#define SDIO_HIMR_CPWM2_MSK BIT(19)
+#define SDIO_HIMR_HSISR_IND_MSK BIT(20)
+#define SDIO_HIMR_GTINT3_IND_MSK BIT(21)
+#define SDIO_HIMR_GTINT4_IND_MSK BIT(22)
+#define SDIO_HIMR_PSTIMEOUT_MSK BIT(23)
+#define SDIO_HIMR_OCPINT_MSK BIT(24)
+#define SDIO_HIMR_ATIMEND_MSK BIT(25)
+#define SDIO_HIMR_ATIMEND_E_MSK BIT(26)
+#define SDIO_HIMR_CTWEND_MSK BIT(27)
/* RTL8188E SDIO Specific */
-#define SDIO_HIMR_MCU_ERR_MSK BIT28
-#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT29
+#define SDIO_HIMR_MCU_ERR_MSK BIT(28)
+#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT(29)
/* SDIO Host Interrupt Service Routine */
-#define SDIO_HISR_RX_REQUEST BIT0
-#define SDIO_HISR_AVAL BIT1
-#define SDIO_HISR_TXERR BIT2
-#define SDIO_HISR_RXERR BIT3
-#define SDIO_HISR_TXFOVW BIT4
-#define SDIO_HISR_RXFOVW BIT5
-#define SDIO_HISR_TXBCNOK BIT6
-#define SDIO_HISR_TXBCNERR BIT7
-#define SDIO_HISR_BCNERLY_INT BIT16
-#define SDIO_HISR_C2HCMD BIT17
-#define SDIO_HISR_CPWM1 BIT18
-#define SDIO_HISR_CPWM2 BIT19
-#define SDIO_HISR_HSISR_IND BIT20
-#define SDIO_HISR_GTINT3_IND BIT21
-#define SDIO_HISR_GTINT4_IND BIT22
-#define SDIO_HISR_PSTIME BIT23
-#define SDIO_HISR_OCPINT BIT24
-#define SDIO_HISR_ATIMEND BIT25
-#define SDIO_HISR_ATIMEND_E BIT26
-#define SDIO_HISR_CTWEND BIT27
+#define SDIO_HISR_RX_REQUEST BIT(0)
+#define SDIO_HISR_AVAL BIT(1)
+#define SDIO_HISR_TXERR BIT(2)
+#define SDIO_HISR_RXERR BIT(3)
+#define SDIO_HISR_TXFOVW BIT(4)
+#define SDIO_HISR_RXFOVW BIT(5)
+#define SDIO_HISR_TXBCNOK BIT(6)
+#define SDIO_HISR_TXBCNERR BIT(7)
+#define SDIO_HISR_BCNERLY_INT BIT(16)
+#define SDIO_HISR_C2HCMD BIT(17)
+#define SDIO_HISR_CPWM1 BIT(18)
+#define SDIO_HISR_CPWM2 BIT(19)
+#define SDIO_HISR_HSISR_IND BIT(20)
+#define SDIO_HISR_GTINT3_IND BIT(21)
+#define SDIO_HISR_GTINT4_IND BIT(22)
+#define SDIO_HISR_PSTIME BIT(23)
+#define SDIO_HISR_OCPINT BIT(24)
+#define SDIO_HISR_ATIMEND BIT(25)
+#define SDIO_HISR_ATIMEND_E BIT(26)
+#define SDIO_HISR_CTWEND BIT(27)
/* RTL8188E SDIO Specific */
-#define SDIO_HISR_MCU_ERR BIT28
-#define SDIO_HISR_TSF_BIT32_TOGGLE BIT29
+#define SDIO_HISR_MCU_ERR BIT(28)
+#define SDIO_HISR_TSF_BIT32_TOGGLE BIT(29)
#define MASK_SDIO_HISR_CLEAR \
(SDIO_HISR_TXERR | SDIO_HISR_RXERR | SDIO_HISR_TXFOVW |\
@@ -1240,8 +1203,8 @@ Current IOREG MAP
SDIO_HISR_PSTIMEOUT | SDIO_HISR_OCPINT)
/* SDIO HCI Suspend Control Register */
-#define HCI_RESUME_PWR_RDY BIT1
-#define HCI_SUS_CTRL BIT0
+#define HCI_RESUME_PWR_RDY BIT(1)
+#define HCI_SUS_CTRL BIT(0)
/* SDIO Tx FIFO related */
/* The number of Tx FIFO free page */
@@ -1275,33 +1238,33 @@ Current IOREG MAP
/* 2REG_MULTI_FUNC_CTRL(For RTL8723 Only) */
/* Enable GPIO[9] as WiFi HW PDn source */
-#define WL_HWPDN_EN BIT0
+#define WL_HWPDN_EN BIT(0)
/* WiFi HW PDn polarity control */
-#define WL_HWPDN_SL BIT1
+#define WL_HWPDN_SL BIT(1)
/* WiFi function enable */
-#define WL_FUNC_EN BIT2
+#define WL_FUNC_EN BIT(2)
/* Enable GPIO[9] as WiFi RF HW PDn source */
-#define WL_HWROF_EN BIT3
+#define WL_HWROF_EN BIT(3)
/* Enable GPIO[11] as BT HW PDn source */
-#define BT_HWPDN_EN BIT16
+#define BT_HWPDN_EN BIT(16)
/* BT HW PDn polarity control */
-#define BT_HWPDN_SL BIT17
+#define BT_HWPDN_SL BIT(17)
/* BT function enable */
-#define BT_FUNC_EN BIT18
+#define BT_FUNC_EN BIT(18)
/* Enable GPIO[11] as BT/GPS RF HW PDn source */
-#define BT_HWROF_EN BIT19
+#define BT_HWROF_EN BIT(19)
/* Enable GPIO[10] as GPS HW PDn source */
-#define GPS_HWPDN_EN BIT20
+#define GPS_HWPDN_EN BIT(20)
/* GPS HW PDn polarity control */
-#define GPS_HWPDN_SL BIT21
+#define GPS_HWPDN_SL BIT(21)
/* GPS function enable */
-#define GPS_FUNC_EN BIT22
+#define GPS_FUNC_EN BIT(22)
/* 3 REG_LIFECTRL_CTRL */
-#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3
-#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2
-#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1
-#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0
+#define HAL92C_EN_PKT_LIFE_TIME_BK BIT(3)
+#define HAL92C_EN_PKT_LIFE_TIME_BE BIT(2)
+#define HAL92C_EN_PKT_LIFE_TIME_VI BIT(1)
+#define HAL92C_EN_PKT_LIFE_TIME_VO BIT(0)
#define HAL92C_MSDU_LIFE_TIME_UNIT 128 /* in us */
@@ -1311,7 +1274,7 @@ Current IOREG MAP
#define POLLING_LLT_THRESHOLD 20
#define POLLING_READY_TIMEOUT_COUNT 1000
/* GPIO BIT */
-#define HAL_8192C_HW_GPIO_WPS_BIT BIT2
+#define HAL_8192C_HW_GPIO_WPS_BIT BIT(2)
/* 8192C EEPROM/EFUSE share register definition. */
diff --git a/drivers/staging/r8188eu/include/rtw_sreset.h b/drivers/staging/r8188eu/include/rtw_sreset.h
index 9ecd75258310..8fa7aa4abb3f 100644
--- a/drivers/staging/r8188eu/include/rtw_sreset.h
+++ b/drivers/staging/r8188eu/include/rtw_sreset.h
@@ -18,13 +18,13 @@ struct sreset_priv {
#include "rtl8188e_hal.h"
#define WIFI_STATUS_SUCCESS 0
-#define USB_VEN_REQ_CMD_FAIL BIT0
-#define USB_READ_PORT_FAIL BIT1
-#define USB_WRITE_PORT_FAIL BIT2
-#define WIFI_MAC_TXDMA_ERROR BIT3
-#define WIFI_TX_HANG BIT4
-#define WIFI_RX_HANG BIT5
-#define WIFI_IF_NOT_EXIST BIT6
+#define USB_VEN_REQ_CMD_FAIL BIT(0)
+#define USB_READ_PORT_FAIL BIT(1)
+#define USB_WRITE_PORT_FAIL BIT(2)
+#define WIFI_MAC_TXDMA_ERROR BIT(3)
+#define WIFI_TX_HANG BIT(4)
+#define WIFI_RX_HANG BIT(5)
+#define WIFI_IF_NOT_EXIST BIT(6)
void sreset_init_value(struct adapter *padapter);
void sreset_reset_value(struct adapter *padapter);
diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
index 4e21801cbfcf..53dcf31626f2 100644
--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -7092,9 +7092,9 @@ static int rtw_mp_reset_stats(struct net_device *dev,
pmp_priv->rx_crcerrpktcount = 0;
/* reset phy counter */
- write_bbreg(padapter, 0xf14, BIT16, 0x1);
+ write_bbreg(padapter, 0xf14, BIT(16), 0x1);
msleep(10);
- write_bbreg(padapter, 0xf14, BIT16, 0x0);
+ write_bbreg(padapter, 0xf14, BIT(16), 0x0);
return 0;
}
--
2.32.0
Powered by blists - more mailing lists