[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210811095043.1700061-1-dqfext@gmail.com>
Date: Wed, 11 Aug 2021 17:50:43 +0800
From: DENG Qingfang <dqfext@...il.com>
To: Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Russell King <linux@...linux.org.uk>,
netdev@...r.kernel.org (open list:MEDIATEK SWITCH DRIVER),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Mediatek SoC
support),
linux-mediatek@...ts.infradead.org (moderated list:ARM/Mediatek SoC
support), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net-next] net: dsa: mt7530: fix VLAN traffic leaks again
When a port leaves a VLAN-aware bridge, the current code does not clear
other ports' matrix field bit. If the bridge is later set to VLAN-unaware
mode, traffic in the bridge may leak to that port.
Remove the VLAN filtering check in mt7530_port_bridge_leave.
Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks")
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@...il.com>
---
drivers/net/dsa/mt7530.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 53e6150e95b6..77e0205e4e59 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1315,11 +1315,8 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
/* Remove this port from the port matrix of the other ports
* in the same bridge. If the port is disabled, port matrix
* is kept and not being setup until the port becomes enabled.
- * And the other port's port matrix cannot be broken when the
- * other port is still a VLAN-aware port.
*/
- if (dsa_is_user_port(ds, i) && i != port &&
- !dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
+ if (dsa_is_user_port(ds, i) && i != port) {
if (dsa_to_port(ds, i)->bridge_dev != bridge)
continue;
if (priv->ports[i].enable)
--
2.25.1
Powered by blists - more mailing lists