| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACC2YF1WCSZqLrCig-O-_wJ9s4x47iTc2Xa0-LnyqLm8EWfUHg@mail.gmail.com>
Date: Thu, 12 Aug 2021 13:21:00 -0700
From: Axel Rasmussen <axel.rasmussen1@...il.com>
To: "ojab //" <ojab@...b.ru>
Cc: Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, ath10k@...ts.infradead.org,
Linux Wireless <linux-wireless@...r.kernel.org>,
netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V2] ath10k: don't fail if IRAM write fails
Sorry again for the slow response time.
I got around to testing this today on my hardware. I tested with a
vanilla 5.13.8 kernel, and then the same kernel with this patch
applied. Long story short, the patch does indeed seem to at least work
around the issue I was seeing in [1]. With this patch applied, I still
get the same "failed to copy target iram contents" error, but the
interface comes up and seems to be functional regardless.
So, for what it's worth (granted I am no wireless expert!), you can take:
Tested-by: Axel Rasmussen <axelrasmussen@...gle.com>
(This issue has nothing to do with my full time job, but I'm meant to
use my @google.com address for any open source contributions, which I
believe applies to commit messages too.)
[1]: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
Here are the two dmesg outputs, for comparison:
# uname -a
Linux router 5.13.8 #1 SMP Wed Aug 11 20:18:51 PDT 2021 x86_64 AMD
GX-412TC SOC AuthenticAMD GNU/Linux
# dmesg | grep ath
[ 12.491747] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 12.613341] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 12.613367] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1
tracing 1 dfs 1 testmode 0
[ 12.615071] ath10k_pci 0000:04:00.0: firmware ver
10.4-3.9.0.2-00131 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery
crc32 23bd9e43
[ 13.846538] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31
crc32 85498734
[ 16.428502] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 16.518692] ath10k_pci 0000:04:00.0: could not init core (-12)
[ 16.518950] ath10k_pci 0000:04:00.0: could not probe fw (-12)
# uname -a
Linux router 5.13.8+ #2 SMP Wed Aug 11 20:28:56 PDT 2021 x86_64 AMD
GX-412TC SOC AuthenticAMD GNU/Linux
# dmesg | grep ath
[ 12.201239] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 12.323354] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 12.323407] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1
tracing 1 dfs 1 testmode 0
[ 12.325162] ath10k_pci 0000:04:00.0: firmware ver
10.4-3.9.0.2-00131 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-reco
very crc32 23bd9e43
[ 13.556748] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31
crc32 85498734
[ 16.155848] ath10k_pci 0000:04:00.0: No hardware memory
[ 16.155873] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 16.267376] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal otp max-sta 512 raw 0 hwcrypto 1
[ 16.382257] ath: EEPROM regdomain sanitized
[ 16.382289] ath: EEPROM regdomain: 0x64
[ 16.382306] ath: EEPROM indicates we should expect a direct regpair map
[ 16.382312] ath: Country alpha2 being used: 00
[ 16.382316] ath: Regpair used: 0x64
[ 16.393599] ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0
[ 41.264025] ath10k_pci 0000:04:00.0: No hardware memory
[ 41.264045] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 41.480677] ath10k_pci 0000:04:00.0: Unknown eventid: 36933
On Sun, Aug 1, 2021 at 7:23 PM Axel Rasmussen <axel.rasmussen1@...il.com> wrote:
>
> On Thu, Jul 22, 2021 at 12:42 PM ojab // <ojab@...b.ru> wrote:
> >
> > See also: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
> >
> > On Thu, 22 Jul 2021 at 22:36, ojab <ojab@...b.ru> wrote:
> > >
> > > After reboot with kernel & firmware updates I found `failed to copy
> > > target iram contents:` in dmesg and missing wlan interfaces for both
> > > of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> > > it, so while I have no idea what's actually happening, I don't see why
> > > we should fail in this case, looks like some optional firmware ability
> > > that could be skipped.
> > >
> > > Also with additional logging there is
> > > ```
> > > [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> > > [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> > > [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> > > [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> > > ```
> > > so exact branch could be seen.
> > >
> > > Signed-off-by: Slava Kardakov <ojab@...b.ru>
> > > ---
> > > Of course I forgot to sing off, since I don't use it by default because I
> > > hate my real name and kernel requires it
>
> Thanks for working on this! And sorry for the slow response. I've been
> unexpectedly very busy lately, but I plan to test out this patch next
> week.
>
> > >
> > > drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> > > 1 file changed, 6 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> > > index 2f9be182fbfb..d9fd5294e142 100644
> > > --- a/drivers/net/wireless/ath/ath10k/core.c
> > > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > > @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > > u32 len, remaining_len;
> > >
> > > hw_mem = ath10k_coredump_get_mem_layout(ar);
> > > - if (!hw_mem)
> > > + if (!hw_mem) {
> > > + ath10k_warn(ar, "No hardware memory");
> > > return -ENOMEM;
> > > + }
> > >
> > > for (i = 0; i < hw_mem->region_table.size; i++) {
> > > tmp = &hw_mem->region_table.regions[i];
> > > @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > > }
> > > }
> > >
> > > - if (!mem_region)
> > > + if (!mem_region) {
> > > + ath10k_warn(ar, "No memory region");
> > > return -ENOMEM;
> > > + }
> > >
> > > for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> > > if (ar->wmi.mem_chunks[i].req_id ==
> > > @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> > > if (status) {
> > > ath10k_warn(ar, "failed to copy target iram contents: %d",
> > > status);
> > > - goto err_hif_stop;
> > > }
> > > }
> > >
> > > --
> > > 2.32.0
Powered by blists - more mailing lists