[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210814194916.GB22278@shell.armlinux.org.uk>
Date: Sat, 14 Aug 2021 20:49:17 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>
Cc: Song Yoong Siang <yoong.siang.song@...el.com>,
Marek BehĂșn <kabel@...nel.org>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 1/1] net: phy: marvell10g: Add WAKE_PHY support
to WOL event
On Sat, Aug 14, 2021 at 08:04:55PM +0200, Andrew Lunn wrote:
> Agreed. If the interrupt register is being used, i think we need this
> patchset to add proper interrupt support. Can you recommend a board
> they can buy off the shelf with the interrupt wired up? Or maybe Intel
> can find a hardware engineer to add a patch wire to link the interrupt
> output to a SoC pin that can do interrupts.
The only board I'm aware of with the 88x3310 interrupt wired is the
Macchiatobin double-shot. :)
I forget why I didn't implement interrupt support though - I probably
need to revisit that. Sure enough, looking at the code I was tinkering
with, adding interrupt support would certainly conflict with this
patch.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists