| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YR053s0EoYrz/RcP@pendragon.ideasonboard.com>
Date: Wed, 18 Aug 2021 19:48:30 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Sakari Ailus <sakari.ailus@....fi>
Cc: Krzysztof Hałasa <khalasa@...p.pl>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4] Driver for ON Semi AR0521 camera sensor
On Wed, Aug 18, 2021 at 07:29:09PM +0300, Sakari Ailus wrote:
> Hi Krzysztof,
>
> Thanks for the patch.
>
> On Fri, Jul 30, 2021 at 09:41:23AM +0200, Krzysztof Hałasa wrote:
> > The driver has been extensively tested in an i.MX6-based system.
> >
> > Signed-off-by: Krzysztof Hałasa <khalasa@...p.pl>
> > ---
> > No changes from v3 here.
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index a61f4f3b78a9..f92b56487fc6 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1331,6 +1331,12 @@ S: Supported
> > W: http://www.aquantia.com
> > F: drivers/net/ethernet/aquantia/atlantic/aq_ptp*
> >
> > +AR0521 ON SEMICONDUCTOR CAMERA SENSOR DRIVER
> > +M: Krzysztof Hałasa <khalasa@...p.pl>
> > +L: linux-media@...r.kernel.org
> > +S: Maintained
> > +F: drivers/media/i2c/ar0521.c
> > +
> > ARASAN NAND CONTROLLER DRIVER
> > M: Miquel Raynal <miquel.raynal@...tlin.com>
> > M: Naga Sureshkumar Relli <nagasure@...inx.com>
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 588f8eb95984..0c41a3c18671 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -729,6 +729,16 @@ config VIDEO_APTINA_PLL
> > config VIDEO_CCS_PLL
> > tristate
> >
> > +config VIDEO_AR0521
> > + tristate "ON Semiconductor AR0521 sensor support"
> > + depends on I2C && VIDEO_V4L2
> > + help
> > + This is a Video4Linux2 sensor driver for the ON Semiconductor
> > + AR0521 camera.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called ar0521.
> > +
> > config VIDEO_HI556
> > tristate "Hynix Hi-556 sensor support"
> > depends on I2C && VIDEO_V4L2
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index 1168fa6b84ed..3351deeb741b 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/
> > obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/
> >
> > obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
> > +obj-$(CONFIG_VIDEO_AR0521) += ar0521.o
>
> Could you arrange this next to other sensors?
>
> > obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
> > obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
> > obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
> > diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c
> > new file mode 100644
> > index 000000000000..0ab10bf2f99f
> > --- /dev/null
> > +++ b/drivers/media/i2c/ar0521.c
> > @@ -0,0 +1,1065 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2021 Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów PIAP
>
> Over 80, please wrap. The same applies to the rest of the driver.
>
> > + * Written by Krzysztof Hałasa
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/clkdev.h>
> > +#include <linux/ctype.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/i2c.h>
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/types.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/math64.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +// External clock (extclk) frequencies
> > +#define AR0521_EXTCLK_RATE (27 * 1000 * 1000)
> > +#define AR0521_EXTCLK_MIN (10 * 1000 * 1000)
> > +#define AR0521_EXTCLK_MAX (48 * 1000 * 1000)
> > +
> > +// PLL and PLL2
> > +#define AR0521_PLL_MIN (320 * 1000 * 1000)
> > +#define AR0521_PLL_MAX (1280 * 1000 * 1000)
> > +
> > +// effective pixel clocks, the registers may be DDR
> > +#define AR0521_PIXEL_CLOCK_MIN (168 * 1000 * 1000)
> > +#define AR0521_PIXEL_CLOCK_MAX (414 * 1000 * 1000)
> > +
> > +#define AR0521_WIDTH_MIN 8u
> > +#define AR0521_WIDTH_MAX 2608u
> > +#define AR0521_HEIGHT_MIN 8u
> > +#define AR0521_HEIGHT_MAX 1958u
> > +
> > +#define AR0521_WIDTH_BLANKING_MIN 572u
> > +#define AR0521_HEIGHT_BLANKING_MIN 28u // must be even
> > +#define AR0521_TOTAL_WIDTH_MIN 2968u
> > +
> > +// AR0521 registers
> > +#define AR0521_REG_VT_PIX_CLK_DIV 0x0300
> > +#define AR0521_REG_FRAME_LENGTH_LINES 0x0340
> > +
> > +#define AR0521_REG_CHIP_ID 0x3000
> > +#define AR0521_REG_COARSE_INTEGRATION_TIME 0x3012
> > +#define AR0521_REG_ROW_SPEED 0x3016
> > +#define AR0521_REG_EXTRA_DELAY 0x3018
> > +#define AR0521_REG_RESET 0x301A
> > +#define AR0521_REG_RESET_DEFAULTS 0x0238
> > +#define AR0521_REG_RESET_GROUP_PARAM_HOLD 0x8000
> > +#define AR0521_REG_RESET_STREAM BIT(2)
> > +#define AR0521_REG_RESET_RESTART BIT(1)
> > +#define AR0521_REG_RESET_INIT BIT(0)
> > +
> > +#define AR0521_REG_GREEN1_GAIN 0x3056
> > +#define AR0521_REG_BLUE_GAIN 0x3058
> > +#define AR0521_REG_RED_GAIN 0x305A
> > +#define AR0521_REG_GREEN2_GAIN 0x305C
> > +#define AR0521_REG_GLOBAL_GAIN 0x305E
> > +
> > +#define AR0521_REG_HISPI_TEST_MODE 0x3066
> > +#define AR0521_REG_HISPI_TEST_MODE_LP11 0x0004
> > +
> > +#define AR0521_REG_TEST_PATTERN_MODE 0x3070
> > +
> > +#define AR0521_REG_SERIAL_FORMAT 0x31AE
> > +#define AR0521_REG_SERIAL_FORMAT_MIPI 0x0200
> > +
> > +#define AR0521_REG_HISPI_CONTROL_STATUS 0x31C6
> > +#define AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE 0x80
> > +
> > +#define be cpu_to_be16
>
> I think you could as well use the original macro.
>
> > +
> > +// regulator supplies
>
> Please use C comments outside SPDX tags. This comment is redundant though.
>
> > +static const char * const ar0521_supply_names[] = {
> > + "vdd_io", // I/O (1.8V) supply
> > + "vdd", // Core, PLL and MIPI (1.2V) supply
> > + "vaa", // Analog (2.7V) supply
> > +};
> > +
> > +#define AR0521_NUM_SUPPLIES ARRAY_SIZE(ar0521_supply_names)
> > +
> > +struct ar0521_ctrls {
> > + struct v4l2_ctrl_handler handler;
> > + struct v4l2_ctrl *exposure;
> > + struct v4l2_ctrl *gain, *red_balance, *blue_balance;
> > + struct v4l2_ctrl *test_pattern;
> > + struct v4l2_ctrl *hblank, *vblank, *pixrate;
> > +};
> > +
> > +struct ar0521_dev {
> > + struct i2c_client *i2c_client;
> > + struct v4l2_subdev sd;
> > + struct media_pad pad;
> > + struct v4l2_fwnode_endpoint ep;
> > + struct clk *extclk;
> > + u32 extclk_freq;
> > +
> > + struct regulator *supplies[AR0521_NUM_SUPPLIES];
> > + struct gpio_desc *reset_gpio;
> > +
> > + // lock to protect all members below
> > + struct mutex lock;
> > +
> > + struct v4l2_mbus_framefmt fmt;
> > + struct v4l2_fract frame_interval, current_frame_interval;
> > + struct ar0521_ctrls ctrls;
> > + u32 pix_clk;
> > + unsigned int power_count;
> > + u16 total_width, total_height, pll_pre, pll_mult, pll_pre2, pll_mult2, extra_delay;
> > + bool streaming;
> > +};
> > +
> > +static int debug;
> > +module_param(debug, int, 0644);
> > +MODULE_PARM_DESC(debug, "Debug level 0-3");
>
> Could you rely on dynamic debug instead?
>
> > +
> > +static inline struct ar0521_dev *to_ar0521_dev(struct v4l2_subdev *sd)
> > +{
> > + return container_of(sd, struct ar0521_dev, sd);
> > +}
> > +
> > +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
> > +{
> > + return &container_of(ctrl->handler, struct ar0521_dev, ctrls.handler)->sd;
> > +}
> > +
> > +static inline unsigned int lanes(struct ar0521_dev *sensor)
> > +{
> > + return sensor->ep.bus.mipi_csi2.num_data_lanes;
> > +}
> > +
> > +static const char *mhz(u32 value)
> > +{
> > + static char buff[32];
> > +
> > + if (value % 1000)
> > + sprintf(buff, "%u.%06u", value / (1000 * 1000), value % (1000 * 1000));
> > + else if (value % (1000 * 1000))
> > + sprintf(buff, "%u.%03u", value / (1000 * 1000), (value / 1000) % 1000);
> > + else
> > + sprintf(buff, "%u", value / (1000 * 1000));
> > + return buff;
>
> Sorry, you can't do that. buff is allocated in the stack and the memory is
> no longer available once the function returns.
It's a static char array, so it won't be allocated on the stack, but
it's still bad practice as it's not thread-safe. Given that it's used in
two debugging messages only, I'd hardcode the %u.06%u format in the
callers.
> > +}
> > +
> > +static u32 div64_round(u64 v, u32 d)
> > +{
> > + return div_u64(v + (d >> 1), d);
> > +}
> > +
> > +static u32 div64_round_up(u64 v, u32 d)
> > +{
> > + return div_u64(v + d - 1, d);
> > +}
> > +
> > +#define HEX_DUMP_WORDS 8
> > +static void dump_i2c(struct ar0521_dev *sensor, const __be16 *data, unsigned int count)
> > +{
> > + char buffer[5 /* " XXXX" */ * HEX_DUMP_WORDS + 1 /* NUL */];
> > + u16 addr;
> > + int i;
> > +
> > + addr = be16_to_cpu(*data++);
> > + count--;
> > + while (count) {
> > + for (i = 0; i < HEX_DUMP_WORDS; i++) {
> > + sprintf(buffer + 5 * i, " %04X", be16_to_cpu(*data++));
> > + addr += 2;
> > + if (!--count)
> > + break;
> > + }
> > + v4l2_dbg(3, debug, &sensor->sd, "WR %04X:%s\n", addr, buffer);
> > + }
> > +}
> > +
> > +// data must be BE16, the first value is the register address
> > +static int ar0521_write_regs(struct ar0521_dev *sensor, const __be16 *data, unsigned int count)
> > +{
> > + struct i2c_client *client = sensor->i2c_client;
> > + struct i2c_msg msg;
> > + int ret;
> > +
> > + if (!sensor->power_count)
> > + return 0;
> > +
> > + if (debug >= 3)
> > + dump_i2c(sensor, data, count);
> > +
> > + msg.addr = client->addr;
> > + msg.flags = client->flags;
> > + msg.buf = (u8 *)data;
> > + msg.len = count * sizeof(*data);
> > +
> > + ret = i2c_transfer(client->adapter, &msg, 1);
> > + if (ret < 0) {
> > + v4l2_err(&sensor->sd, "%s: I2C write error\n", __func__);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int ar0521_write_reg(struct ar0521_dev *sensor, u16 reg, u16 val)
> > +{
> > + __be16 buf[2] = {be(reg), be(val)};
> > +
> > + return ar0521_write_regs(sensor, buf, 2);
> > +}
> > +
> > +static int ar0521_set_geometry(struct ar0521_dev *sensor)
> > +{
> > + // all dimensions are unsigned 12-bit integers
> > + u16 x = (AR0521_WIDTH_MAX - sensor->fmt.width) / 2;
> > + u16 y = ((AR0521_HEIGHT_MAX - sensor->fmt.height) / 2) & ~1;
> > + __be16 regs[] = {
> > + be(AR0521_REG_FRAME_LENGTH_LINES),
> > + be(sensor->total_height),
> > + be(sensor->total_width),
> > + be(x),
> > + be(y),
> > + be(x + sensor->fmt.width - 1),
> > + be(y + sensor->fmt.height - 1),
> > + be(sensor->fmt.width),
> > + be(sensor->fmt.height)
> > + };
> > +
> > + v4l2_dbg(2, debug, &sensor->sd, "%s()\n", __func__);
> > +
> > + return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs));
> > +}
> > +
> > +static int ar0521_set_gains(struct ar0521_dev *sensor)
> > +{
> > + int green = sensor->ctrls.gain->val;
> > + int red = max(green + sensor->ctrls.red_balance->val, 0);
> > + int blue = max(green + sensor->ctrls.blue_balance->val, 0);
> > + unsigned int gain = min(red, min(green, blue));
> > + unsigned int analog = min(gain, 64u); // range is 0 - 127
> > + __be16 regs[5];
> > +
> > + v4l2_dbg(2, debug, &sensor->sd, "%s()\n", __func__);
> > +
> > + red = min(red - analog + 64, 511u);
> > + green = min(green - analog + 64, 511u);
> > + blue = min(blue - analog + 64, 511u);
> > + regs[0] = be(AR0521_REG_GREEN1_GAIN);
> > + regs[1] = be(green << 7 | analog);
> > + regs[2] = be(blue << 7 | analog);
> > + regs[3] = be(red << 7 | analog);
> > + regs[4] = be(green << 7 | analog);
>
> I think I'd use u16 for red, green and blue. Shifting signed integers can
> result in undefined behaviour (MSB).
>
> > +
> > + return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs));
> > +}
> > +
> > +static int ar0521_write_mode(struct ar0521_dev *sensor)
> > +{
> > + __be16 pll_regs[] = {
> > + be(AR0521_REG_VT_PIX_CLK_DIV),
> > + /* 0x300 */ be(4), // vt_pix_clk_div = number of bits / 2
> > + /* 0x302 */ be(1), // vt_sys_clk_div
> > + /* 0x304 */ be((sensor->pll_pre2 << 8) | sensor->pll_pre),
> > + /* 0x306 */ be((sensor->pll_mult2 << 8) | sensor->pll_mult),
> > + /* 0x308 */ be(8), // op_pix_clk_div = 2 * vt_pix_clk_div
> > + /* 0x30A */ be(1) // op_sys_clk_div
> > + };
> > + u32 num = sensor->current_frame_interval.numerator;
> > + u32 denom = sensor->current_frame_interval.denominator;
> > + int ret;
> > +
> > + v4l2_dbg(2, debug, &sensor->sd, "%s()\n", __func__);
> > +
> > + // stop streaming for just a moment
> > + ret = ar0521_write_reg(sensor, AR0521_REG_RESET, AR0521_REG_RESET_DEFAULTS);
> > + if (ret)
> > + return ret;
> > +
> > + ret = ar0521_set_geometry(sensor);
> > + if (ret)
> > + return ret;
> > +
> > + ret = ar0521_write_regs(sensor, pll_regs, ARRAY_SIZE(pll_regs));
> > + if (ret)
> > + return ret;
> > +
> > + ret = ar0521_write_reg(sensor, AR0521_REG_COARSE_INTEGRATION_TIME, sensor->ctrls.exposure->val);
> > + if (ret)
> > + return ret;
> > +
> > + ret = ar0521_write_reg(sensor, AR0521_REG_EXTRA_DELAY, sensor->extra_delay);
> > + if (ret)
> > + return ret;
> > +
> > + ret = ar0521_write_reg(sensor, AR0521_REG_RESET, AR0521_REG_RESET_DEFAULTS | AR0521_REG_RESET_STREAM);
> > + if (ret)
> > + return ret;
> > +
> > + ret = ar0521_write_reg(sensor, AR0521_REG_TEST_PATTERN_MODE, sensor->ctrls.test_pattern->val);
> > + if (ret)
> > + return ret;
> > +
> > + dev_info(&sensor->i2c_client->dev,
> > + "AR0521: %ux%u, total %ux%u, pixel clock %s MHz, %u (%u/%u) FPS\n",
> > + sensor->fmt.width, sensor->fmt.height, sensor->total_width, sensor->total_height,
> > + mhz(sensor->pix_clk), (num + denom / 2) / denom, num, denom);
>
> dev_dbg() would seem more appropriate.
>
> Could you simply print the frequency in Hz?
>
> > + return 0;
> > +}
> > +
> > +static int ar0521_set_stream(struct ar0521_dev *sensor, bool on)
> > +{
> > + int ret;
> > +
> > + v4l2_dbg(2, debug, &sensor->sd, "%s(%u)\n", __func__, on);
> > +
> > + ret = ar0521_write_mode(sensor);
> > + if (ret)
> > + return ret;
> > +
> > + if (on) {
> > + ret = ar0521_set_gains(sensor);
> > + if (ret)
> > + return ret;
> > +
> > + // normal output on clock and data lanes
> > + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS, 0);
> > + if (ret)
> > + return ret;
> > + } else {
> > + // reset gain, the sensor may produce all white pixels without this
> > + ret = ar0521_write_reg(sensor, AR0521_REG_GLOBAL_GAIN, 0x2000);
> > + if (ret)
> > + return ret;
> > +
> > + // set LP-11 on clock and data lanes
> > + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS,
> > + AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + // start streaming (possibly with LP-11 on all lines)
> > + return ar0521_write_reg(sensor, AR0521_REG_RESET,
> > + AR0521_REG_RESET_DEFAULTS |
> > + AR0521_REG_RESET_RESTART |
> > + AR0521_REG_RESET_STREAM);
> > +}
> > +
> > +static u32 calc_pll(struct ar0521_dev *sensor, int num, u32 freq, u16 *pre_ptr, u16 *mult_ptr)
> > +{
> > + u16 pre = 1, mult = 1, new_pre;
> > + u32 pll = AR0521_PLL_MAX + 1;
> > +
> > + for (new_pre = 1; new_pre < 64; new_pre++) {
> > + u32 new_pll;
> > + u32 new_mult = div64_round_up((u64)freq * new_pre, sensor->extclk_freq);
> > +
> > + if (new_mult < 32)
> > + continue; // minimum value
> > + if (new_mult > 254)
> > + break; // maximum, larger pre won't work either
> > + if (sensor->extclk_freq * (u64)new_mult < AR0521_PLL_MIN * new_pre)
> > + continue;
> > + if (sensor->extclk_freq * (u64)new_mult > AR0521_PLL_MAX * new_pre)
> > + break; // larger pre won't work either
> > + new_pll = div64_round_up(sensor->extclk_freq * (u64)new_mult, new_pre);
> > + if (new_pll < pll) {
> > + pll = new_pll;
> > + pre = new_pre;
> > + mult = new_mult;
> > + }
> > + }
> > +
> > + pll = div64_round(sensor->extclk_freq * (u64)mult, pre);
> > + *pre_ptr = pre;
> > + *mult_ptr = mult;
> > + return pll;
> > +}
> > +
> > +static void ar0521_adj_fmt(struct v4l2_mbus_framefmt *fmt)
> > +{
> > + fmt->width = clamp(ALIGN(fmt->width, 4), AR0521_WIDTH_MIN, AR0521_WIDTH_MAX);
> > + fmt->height = clamp(ALIGN(fmt->height, 4), AR0521_HEIGHT_MIN, AR0521_HEIGHT_MAX);
> > + fmt->code = MEDIA_BUS_FMT_SGRBG8_1X8;
> > + fmt->field = V4L2_FIELD_NONE;
> > + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> > + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> > + fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> > + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> > +}
> > +
> > +#define DIV 4
>
> What does DIV signify?
>
> > +static void ar0521_calc_mode(struct ar0521_dev *sensor)
> > +{
> > + unsigned int speed_mod = 4 / lanes(sensor); // 1 with 4 DDR lanes
> > + u64 pix_clk; // for calculations
> > + u32 pixels, num, denom, new_total_height, new_pixels;
> > + u16 total_width, total_height;
> > +
> > + total_width = max(sensor->fmt.width + AR0521_WIDTH_BLANKING_MIN, AR0521_TOTAL_WIDTH_MIN);
> > + total_height = sensor->fmt.height + AR0521_HEIGHT_BLANKING_MIN;
> > +
> > + pixels = total_width * total_height;
> > + num = sensor->frame_interval.numerator;
> > + denom = sensor->frame_interval.denominator;
> > +
> > + // calculate approximate pixel clock first
> > + pix_clk = div64_round_up(pixels * (u64)num, denom);
> > + if (pix_clk > AR0521_PIXEL_CLOCK_MAX) {
> > + u32 cnt;
> > + // have to recalculate FPS
> > + num = pix_clk = AR0521_PIXEL_CLOCK_MAX;
> > + denom = pixels;
> > + // try to reduce the numbers a bit
> > + for (cnt = 2; cnt * cnt < denom; cnt++)
>
> Braces would be nice here.
>
> > + while (num % cnt == 0 && denom % cnt == 0) {
> > + num /= cnt;
> > + denom /= cnt;
> > + }
> > + } else if (pix_clk < AR0521_PIXEL_CLOCK_MIN)
> > + // we will compensate with total_height and extra_delay
> > + pix_clk = AR0521_PIXEL_CLOCK_MIN;
> > +
> > + sensor->current_frame_interval.numerator = num;
> > + sensor->current_frame_interval.denominator = denom;
> > +
> > + // PLL1 drives pixel clock - dual rate
> > + pix_clk = calc_pll(sensor, 1, pix_clk * (DIV / 2), &sensor->pll_pre, &sensor->pll_mult);
> > + pix_clk = div64_round(pix_clk, (DIV / 2));
> > + calc_pll(sensor, 2, pix_clk * (DIV / 2) * speed_mod, &sensor->pll_pre2, &sensor->pll_mult2);
> > +
> > + // let's see if we can do better
> > + new_total_height = (div64_round((u64)pix_clk * denom, num) / total_width) & ~1; // must be even
> > + if (new_total_height > total_height) {
> > + total_height = new_total_height;
> > + pixels = total_width * total_height;
> > + }
> > +
> > + // maybe there is still room for improvement
> > + new_pixels = div64_round(pix_clk * denom, num);
> > + sensor->extra_delay = 0;
> > + if (new_pixels > pixels)
> > + sensor->extra_delay = new_pixels - pixels;
> > +
> > + sensor->pix_clk = pix_clk;
> > + sensor->total_width = total_width;
> > + sensor->total_height = total_height;
> > +}
> > +
> > +static int ar0521_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > + struct v4l2_mbus_framefmt *fmt;
> > +
> > + if (format->pad)
> > + return -EINVAL;
>
> The caller has already checked for this as I understand you have a single
> pad only (0).
>
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s(%u)\n", __func__, format->which);
> > +
> > + mutex_lock(&sensor->lock);
> > +
> > + if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> > + fmt = v4l2_subdev_get_try_format(&sensor->sd, sd_state, 0 /* pad */);
> > + else
> > + fmt = &sensor->fmt;
> > +
> > + format->format = *fmt;
> > +
> > + mutex_unlock(&sensor->lock);
> > + return 0;
> > +}
> > +
> > +static int ar0521_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > + int ret = 0;
> > +
> > + if (format->pad)
> > + return -EINVAL;
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s(%u)\n", __func__, format->which);
> > +
> > + ar0521_adj_fmt(&format->format);
> > +
> > + mutex_lock(&sensor->lock);
> > +
> > + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> > + struct v4l2_mbus_framefmt *fmt;
> > +
> > + fmt = v4l2_subdev_get_try_format(sd, sd_state, 0 /* pad */);
> > + *fmt = format->format;
> > + } else {
> > + sensor->fmt = format->format;
> > + ar0521_calc_mode(sensor);
> > + ret = ar0521_write_mode(sensor);
> > + }
> > +
> > + mutex_unlock(&sensor->lock);
> > + return ret;
> > +}
> > +
> > +static int ar0521_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > + int ret;
> > +
> > + // v4l2_ctrl_lock() locks our own mutex
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s(0x%X)\n", __func__, ctrl->id);
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_HBLANK:
> > + case V4L2_CID_VBLANK:
> > + sensor->total_width = sensor->fmt.width + sensor->ctrls.hblank->val;
> > + sensor->total_height = sensor->fmt.width + sensor->ctrls.vblank->val;
> > + ret = ar0521_set_geometry(sensor);
> > + break;
> > + case V4L2_CID_GAIN:
> > + case V4L2_CID_RED_BALANCE:
> > + case V4L2_CID_BLUE_BALANCE:
> > + ret = ar0521_set_gains(sensor);
> > + break;
> > + case V4L2_CID_EXPOSURE:
> > + ret = ar0521_write_reg(sensor, AR0521_REG_COARSE_INTEGRATION_TIME, ctrl->val);
> > + break;
> > + case V4L2_CID_TEST_PATTERN:
> > + ret = ar0521_write_reg(sensor, AR0521_REG_TEST_PATTERN_MODE, ctrl->val);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops ar0521_ctrl_ops = {
> > + .s_ctrl = ar0521_s_ctrl,
> > +};
> > +
> > +static const char * const test_pattern_menu[] = {
> > + "Disabled",
> > + "Solid color",
> > + "Color bars",
> > + "Faded color bars"
> > +};
> > +
> > +static int ar0521_init_controls(struct ar0521_dev *sensor)
> > +{
> > + const struct v4l2_ctrl_ops *ops = &ar0521_ctrl_ops;
> > + struct ar0521_ctrls *ctrls = &sensor->ctrls;
> > + struct v4l2_ctrl_handler *hdl = &ctrls->handler;
> > + int ret;
> > +
> > + v4l2_ctrl_handler_init(hdl, 32);
> > +
> > + // we can use our own mutex for the ctrl lock
> > + hdl->lock = &sensor->lock;
> > +
> > + // manual gain
> > + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, 0, 511, 1, 0);
> > + ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, -512, 511, 1, 0);
> > + ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, -512, 511, 1, 0);
> > +
> > + // alternate for frame interval
> > + ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, AR0521_WIDTH_BLANKING_MIN, 4094, 1, AR0521_WIDTH_BLANKING_MIN);
> > + ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK, AR0521_HEIGHT_BLANKING_MIN, 4094, 2, AR0521_HEIGHT_BLANKING_MIN);
> > + // Read-only
> > + ctrls->pixrate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE, AR0521_PIXEL_CLOCK_MIN, AR0521_PIXEL_CLOCK_MAX, 1, AR0521_PIXEL_CLOCK_MIN);
> > +
> > + // manual exposure time
> > + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, 0, 65535, 1, 0);
> > +
> > + ctrls->test_pattern = v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
> > + ARRAY_SIZE(test_pattern_menu) - 1,
> > + 0, 0, test_pattern_menu);
> > +
> > + if (hdl->error) {
> > + ret = hdl->error;
> > + goto free_ctrls;
> > + }
> > +
> > + sensor->sd.ctrl_handler = hdl;
> > + return 0;
> > +
> > +free_ctrls:
> > + v4l2_ctrl_handler_free(hdl);
> > + return ret;
> > +}
> > +
> > +static const struct initial_reg {
> > + u16 addr, value;
> > +} initial_regs[] = {
> > + // corrections_recommended_bayer
> > + {0x3042, 0x0004}, // RNC:enable b/w rnc mode
> > + {0x3044, 0x4580}, // RNC:enable row noise correction
> > + {0x30EE, 0x1136}, // RNC:rnc scaling factor-->initial recommended setting
> > + {0x3120, 0x0001}, // recommended setting for dither
> > + {0x3F2C, 0x442E}, // GTH_THRES_RTN: 7max,7min filtered out of every 46
> > + {0x30D2, 0x0000}, // CRM/CC: enable crm on Visible and CC rows
> > + {0x30D4, 0x0000}, // CC: CC enabled with 16 samples per column
> > + {0x30D6, 0x2FFF}, // CC: bw mode enabled/12 bit data resolution/bw mode
> > + {0x30DA, 0x0FFF}, // CC: column correction clip level 2 is 0
> > + {0x30DC, 0x0FFF}, // CC: column correction clip level 3 is 0
> > + {0x30DE, 0x0000}, // CC: Group FPN correction
> > + {0x31E0, 0x0781}, // Fuse/2DDC: enable 2ddc
> > + {0x3180, 0x9434}, // FDOC:fdoc settings with fdoc every frame turned of
> > + {0x3172, 0x0206}, // txlo clk divider options
> > + {0x3F00, 0x0017}, // BM_T0
> > + {0x3F02, 0x02DD}, // BM_T1
> > + {0x3F04, 0x0020}, // if Ana_gain less than 2, use noise_floor0, multipl
> > + {0x3F06, 0x0040}, // if Ana_gain between 4 and 7, use noise_floor2 and
> > + {0x3F08, 0x0070}, // if Ana_gain between 4 and 7, use noise_floor2 and
> > + {0x3F0A, 0x0101}, // Define noise_floor0(low address) and noise_floor1
> > + {0x3F0C, 0x0302}, // Define noise_floor2 and noise_floor3
> > + {0x3F1E, 0x0022},
> > + {0x3F1A, 0x01FF}, // cross factor 2
> > + {0x3F14, 0x0505}, // single k factor 2
> > + {0x3F44, 0x0707}, // couple k factor 2
> > + {0x3F18, 0x01FF}, // cross factor 1
> > + {0x3F12, 0x0505}, // single k factor 1
> > + {0x3F42, 0x1511}, // couple k factor 1
> > + {0x3F16, 0x01FF}, // cross factor 0
> > + {0x3F10, 0x0505}, // single k factor 0
> > + {0x3F40, 0x1511}, // couple k factor 0
> > +
> > + // analog_setup_recommended_12bit
> > + {0x3EB6, 0x004C}, // ECL
> > + {0x3EBA, 0xAAAA},
> > + {0x3EBC, 0x0086}, // Bias currents for FSC/ECL
> > + {0x3EC0, 0x1E00}, // SFbin/SH mode settings
> > + {0x3EC2, 0x100B}, // CLK divider for ramp for 12 bit 400MHz mode only
> > + {0x3EC4, 0x3300}, // FSC clamps for HDR mode and adc comp power down co
> > + {0x3EC6, 0xEA44}, // VLN and clk gating controls
> > + {0x3EC8, 0x6F6F}, // Txl0 and Txlo1 settings for normal mode
> > + {0x3ECA, 0x2F4A}, // CDAC/Txlo2/RSTGHI/RSTGLO settings
> > + {0x3ECC, 0x0506}, // RSTDHI/RSTDLO/CDAC/TXHI settings
> > + {0x3ECE, 0x203B}, // Ramp buffer settings and Booster enable (bits 0-5)
> > + {0x3ED0, 0x13F0}, // TXLO from atest/sf bin settings
> > + {0x3ED2, 0x9A3D}, // Booster settings for reference rows/columns
> > + {0x3ED4, 0x862F}, // TXLO open loop/row driver settings
> > + {0x3ED6, 0x4081}, // Txlatch fr cfpn rows/vln bias
> > + {0x3ED8, 0x4003}, // Ramp step setting for 12 bit 400 Mhz mode
> > + {0x3EDA, 0x9A80}, // ramp offset for T1/normal and rst under range
> > + {0x3EDC, 0xC000}, // over range for rst and under range for sig
> > + {0x3EDE, 0xC103}, // over range for sig and col dec clk settings
> > + {0x3426, 0x1600}, // ADC offset distribution pulse
> > + {0x342A, 0x0038}, // pulse_config
> > + {0x3F3E, 0x0001}, // Switch ADC from 10 bit to 12 bit mode
> > + {0x341A, 0x6051},
> > + {0x3420, 0x6051},
> > +
> > + // analog_setup_recommended_10bit
> > + {0x3EC2, 0x100A}, // CLK divider for ramp for 10 bit 400MH
> > + {0x3ED8, 0x8003}, // Ramp step setting for 10 bit 400 Mhz
> > + {0x341A, 0x4735}, // Samp&Hold pulse in ADC
> > + {0x3420, 0x4735}, // Samp&Hold pulse in ADC
> > + {0x3426, 0x8A1A}, // ADC offset distribution pulse
> > + {0x342A, 0x0018}, // pulse_config
> > + {0x3ED2, 0xA53D}, // Ramp offset
> > + {0x3EDA, 0xA580}, // Ramp Offset
> > + {0x3EBA, 0xAAAD},
> > + {0x3EB6, 0x004C},
> > + {0x3F3E, 0x0000}, // Switch ADC from 12 bit to 10 bit mode
> > +
> > + // new RNC 10bit
> > + {0x30EE, 0x1136}, // RNC:rnc scaling factor=*54/64 (32/38*64=53.9)
> > + {0x3F2C, 0x442E}, // GTH_THRES_RTN: 4max,4min filtered out of every 46 samples and
> > + // for 10bit mode
> > + {0x301E, 0x00AA}, // PEDESTAL+2 :+2 is a workaround for 10bit mode +0.5 Rounding
> > + {0x3120, 0x0005}, // p1 dither enabled for 10bit mode
> > +
> > + {0x0112, 0x0808}, // 8-bit/8-bit mode
> > + {0x31BC, 0x068C}, // don't use continuous clock mode while shut down
> > + {0x30FA, 0xFD00}, // GPIO0 = flash, GPIO1 = shutter
> > + {0x31B0, 0x008B}, // frame_preamble - FIXME check WRT lanes#
> > + {0x31B2, 0x0050}, // line_preamble - FIXME check WRT lanes#
> > +};
> > +
> > +static __be16 pixel_timing_recommended[] = {
> > + be(0x3D00), // first register address
> > + /* 3D00 */ be(0x043E), be(0x4760), be(0xFFFF), be(0xFFFF), be(0x8000), be(0x0510), be(0xAF08), be(0x0252),
> > + /* 3D10 */ be(0x486F), be(0x5D5D), be(0x8056), be(0x8313), be(0x0087), be(0x6A48), be(0x6982), be(0x0280),
> > + /* 3D20 */ be(0x8359), be(0x8D02), be(0x8020), be(0x4882), be(0x4269), be(0x6A95), be(0x5988), be(0x5A83),
> > + /* 3D30 */ be(0x5885), be(0x6280), be(0x6289), be(0x6097), be(0x5782), be(0x605C), be(0xBF18), be(0x0961),
> > + /* 3D40 */ be(0x5080), be(0x2090), be(0x4390), be(0x4382), be(0x5F8A), be(0x5D5D), be(0x9C63), be(0x8063),
> > + /* 3D50 */ be(0xA960), be(0x9757), be(0x8260), be(0x5CFF), be(0xBF10), be(0x1681), be(0x0802), be(0x8000),
> > + /* 3D60 */ be(0x141C), be(0x6000), be(0x6022), be(0x4D80), be(0x5C97), be(0x6A69), be(0xAC6F), be(0x4645),
> > + /* 3D70 */ be(0x4400), be(0x0513), be(0x8069), be(0x6AC6), be(0x5F95), be(0x5F70), be(0x8040), be(0x4A81),
> > + /* 3D80 */ be(0x0300), be(0xE703), be(0x0088), be(0x4A83), be(0x40FF), be(0xFFFF), be(0xFD70), be(0x8040),
> > + /* 3D90 */ be(0x4A85), be(0x4FA8), be(0x4F8C), be(0x0070), be(0xBE47), be(0x8847), be(0xBC78), be(0x6B89),
> > + /* 3DA0 */ be(0x6A80), be(0x6986), be(0x6B8E), be(0x6B80), be(0x6980), be(0x6A88), be(0x7C9F), be(0x866B),
> > + /* 3DB0 */ be(0x8765), be(0x46FF), be(0xE365), be(0xA679), be(0x4A40), be(0x4580), be(0x44BC), be(0x7000),
> > + /* 3DC0 */ be(0x8040), be(0x0802), be(0x10EF), be(0x0104), be(0x3860), be(0x5D5D), be(0x5682), be(0x1300),
> > + /* 3DD0 */ be(0x8648), be(0x8202), be(0x8082), be(0x598A), be(0x0280), be(0x2048), be(0x3060), be(0x8042),
> > + /* 3DE0 */ be(0x9259), be(0x865A), be(0x8258), be(0x8562), be(0x8062), be(0x8560), be(0x9257), be(0x8221),
> > + /* 3DF0 */ be(0x10FF), be(0xB757), be(0x9361), be(0x1019), be(0x8020), be(0x9043), be(0x8E43), be(0x845F),
> > + /* 3E00 */ be(0x835D), be(0x805D), be(0x8163), be(0x8063), be(0xA060), be(0x9157), be(0x8260), be(0x5CFF),
> > + /* 3E10 */ be(0xFFFF), be(0xFFE5), be(0x1016), be(0x2048), be(0x0802), be(0x1C60), be(0x0014), be(0x0060),
> > + /* 3E20 */ be(0x2205), be(0x8120), be(0x908F), be(0x6A80), be(0x6982), be(0x5F9F), be(0x6F46), be(0x4544),
> > + /* 3E30 */ be(0x0005), be(0x8013), be(0x8069), be(0x6A80), be(0x7000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3E40 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3E50 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3E60 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3E70 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3E80 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3E90 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3EA0 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> > + /* 3EB0 */ be(0x0000), be(0x0000), be(0x0000)};
> > +
> > +static void ar0521_power_off(struct ar0521_dev *sensor)
> > +{
> > + int i;
>
> unsigned int?
>
> Same for the rest of similar loops.
>
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s()\n", __func__);
> > + clk_disable_unprepare(sensor->extclk);
> > +
> > + if (sensor->reset_gpio)
> > + gpiod_set_value(sensor->reset_gpio, 1); // assert RESET signal
> > +
> > + for (i = AR0521_NUM_SUPPLIES - 1; i >= 0; i--) {
> > + if (sensor->supplies[i])
> > + regulator_disable(sensor->supplies[i]);
> > + }
> > +}
> > +
> > +static int ar0521_power_on(struct ar0521_dev *sensor)
> > +{
> > + int i, ret;
> > + unsigned int nlanes = lanes(sensor);
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s()\n", __func__);
> > + for (i = 0; i < AR0521_NUM_SUPPLIES; i++)
> > + if (sensor->supplies[i]) {
> > + ret = regulator_enable(sensor->supplies[i]);
> > + if (ret < 0)
> > + goto off;
> > +
> > + usleep_range(1000, 1500); // min 1 ms
> > + }
> > +
> > + ret = clk_prepare_enable(sensor->extclk);
> > + if (ret < 0) {
> > + v4l2_err(&sensor->sd, "error enabling sensor clock\n");
> > + goto off;
> > + }
> > + usleep_range(1000, 1500); // min 1 ms
> > +
> > + if (sensor->reset_gpio)
> > + gpiod_set_value(sensor->reset_gpio, 0); // deassert RESET signal
> > + usleep_range(4500, 5000); // min 45000 clocks
> > +
> > + for (i = 0; i < ARRAY_SIZE(initial_regs); i++)
> > + if (ar0521_write_reg(sensor, initial_regs[i].addr, initial_regs[i].value))
> > + goto off;
> > +
> > + ret = ar0521_write_regs(sensor, pixel_timing_recommended, ARRAY_SIZE(pixel_timing_recommended));
> > + if (ret)
> > + goto off;
> > +
> > + ret = ar0521_write_reg(sensor, AR0521_REG_SERIAL_FORMAT, AR0521_REG_SERIAL_FORMAT_MIPI | nlanes);
> > + if (ret)
> > + goto off;
> > +
> > + // set MIPI test mode - disabled for now
> > + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_TEST_MODE,
> > + ((0x40 << nlanes) - 0x40) | AR0521_REG_HISPI_TEST_MODE_LP11);
> > + if (ret)
> > + goto off;
> > +
> > + ret = ar0521_write_reg(sensor, AR0521_REG_ROW_SPEED, 0x110 | 4 / nlanes);
> > + if (ret)
> > + goto off;
> > +
> > + ar0521_calc_mode(sensor);
> > +
> > + ret = ar0521_set_stream(sensor, 0);
> > + if (ret)
> > + goto off;
> > +
> > + return 0;
> > +off:
> > + ar0521_power_off(sensor);
> > + return ret;
> > +}
> > +
> > +static int ar0521_s_power(struct v4l2_subdev *sd, int on)
> > +{
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s(%u, %s)\n", __func__, sensor->power_count, on ? "on" : "off");
> > +
> > + if (on) {
> > + if (!sensor->power_count++) {
> > + int ret = ar0521_power_on(sensor);
>
> Could you instead use runtime PM? See e.g. the imx319 driver for an
> example.
>
> > +
> > + if (ret) {
> > + sensor->power_count = 0; // undo
> > + return ret;
> > + }
> > + }
> > + } else if (!--sensor->power_count)
> > + ar0521_power_off(sensor);
> > +
> > + return 0;
> > +}
> > +
> > +static int ar0521_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > +
> > + if (code->pad || code->index)
> > + return -EINVAL;
> > +
> > + code->code = sensor->fmt.code;
> > + v4l2_dbg(1, debug, &sensor->sd, "%s() = %X\n", __func__, code->code);
> > + return 0;
> > +}
> > +
> > +static int ar0521_g_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi)
> > +{
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > +
> > + mutex_lock(&sensor->lock);
> > + fi->interval = sensor->current_frame_interval;
> > + mutex_unlock(&sensor->lock);
> > + v4l2_dbg(1, debug, &sensor->sd, "%s() = %u/%u\n", __func__,
> > + fi->interval.numerator, fi->interval.denominator);
> > + return 0;
> > +}
>
> Virtually all new sensor drivers use the blanking controls to configure the
> frame rate. Could you do the same?
>
> Also Documentation/driver-api/media/camera-sensor.rst .
>
> > +
> > +static int ar0521_s_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi)
> > +{
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > + int ret;
> > +
> > + if (fi->pad)
> > + return -EINVAL;
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s(%u/%u)\n", __func__,
> > + fi->interval.numerator, fi->interval.denominator);
> > + mutex_lock(&sensor->lock);
> > +
> > + if (sensor->streaming) {
> > + ret = -EBUSY;
> > + goto out;
> > + }
> > +
> > + sensor->frame_interval = fi->interval;
> > + ar0521_calc_mode(sensor);
> > + ret = ar0521_write_mode(sensor);
> > +out:
> > + mutex_unlock(&sensor->lock);
> > + return ret;
> > +}
> > +
> > +static int ar0521_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > + int ret;
> > +
> > + v4l2_dbg(1, debug, &sensor->sd, "%s(%i)\n", __func__, enable);
> > + mutex_lock(&sensor->lock);
> > +
> > + ret = ar0521_set_stream(sensor, enable);
> > + sensor->streaming = enable;
> > +
> > + mutex_unlock(&sensor->lock);
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_subdev_core_ops ar0521_core_ops = {
> > + .log_status = v4l2_ctrl_subdev_log_status,
> > + .s_power = ar0521_s_power,
> > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> > + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> > +};
> > +
> > +static const struct v4l2_subdev_video_ops ar0521_video_ops = {
> > + .g_frame_interval = ar0521_g_frame_interval,
> > + .s_frame_interval = ar0521_s_frame_interval,
> > + .s_stream = ar0521_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops ar0521_pad_ops = {
> > + .enum_mbus_code = ar0521_enum_mbus_code,
> > + .get_fmt = ar0521_get_fmt,
> > + .set_fmt = ar0521_set_fmt,
> > +};
> > +
> > +static const struct v4l2_subdev_ops ar0521_subdev_ops = {
> > + .core = &ar0521_core_ops,
> > + .video = &ar0521_video_ops,
> > + .pad = &ar0521_pad_ops,
> > +};
> > +
> > +static int ar0521_probe(struct i2c_client *client, const struct i2c_device_id *id)
> > +{
> > + struct device *dev = &client->dev;
> > + struct fwnode_handle *endpoint;
> > + struct ar0521_dev *sensor;
> > + unsigned int cnt, nlanes;
> > + int ret;
> > +
> > + v4l2_dbg(1, debug, client, "%s()\n", __func__);
> > + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
> > + if (!sensor)
> > + return -ENOMEM;
> > +
> > + sensor->i2c_client = client;
> > + sensor->fmt.code = MEDIA_BUS_FMT_SGRBG8_1X8;
> > + sensor->fmt.width = AR0521_WIDTH_MAX;
> > + sensor->fmt.height = AR0521_HEIGHT_MAX;
> > + sensor->fmt.field = V4L2_FIELD_NONE;
> > + sensor->frame_interval.numerator = 30;
> > + sensor->frame_interval.denominator = 1;
> > +
> > + endpoint = fwnode_graph_get_next_endpoint(of_fwnode_handle(dev->of_node), NULL);
> > + if (!endpoint) {
> > + dev_err(dev, "endpoint node not found\n");
> > + return -EINVAL;
> > + }
> > +
> > + ret = v4l2_fwnode_endpoint_parse(endpoint, &sensor->ep);
> > + fwnode_handle_put(endpoint);
> > + if (ret) {
> > + dev_err(dev, "could not parse endpoint\n");
> > + return ret;
> > + }
> > +
> > + if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
>
> Please assign the bus type before parsing the endpoint.
>
> > + dev_err(dev, "invalid bus type, must be MIPI CSI2\n");
> > + return -EINVAL;
> > + }
> > +
> > + nlanes = lanes(sensor);
>
> Could you store the number of lanes to the device specific struct instead
> of the entire parsed endpoint, if you only use this information?
>
> > + switch (nlanes) {
> > + case 1:
> > + case 2:
> > + case 4:
> > + break;
> > + default:
> > + dev_err(dev, "invalid number of MIPI data lane%s\n", nlanes > 1 ? "s" : "");
> > + return -EINVAL;
> > + }
> > +
> > + // get master clock (extclk)
> > + sensor->extclk = devm_clk_get(dev, "extclk");
> > + if (IS_ERR(sensor->extclk)) {
> > + dev_err(dev, "failed to get extclk\n");
> > + return PTR_ERR(sensor->extclk);
> > + }
> > +
> > + ret = clk_set_rate(sensor->extclk, AR0521_EXTCLK_RATE);
> > + if (ret < 0) {
> > + dev_err(dev, "error setting clock rate\n");
> > + return ret;
> > + }
> > +
> > + sensor->extclk_freq = clk_get_rate(sensor->extclk);
> > +
> > + if (sensor->extclk_freq < AR0521_EXTCLK_MIN ||
> > + sensor->extclk_freq > AR0521_EXTCLK_MAX) {
>
> This is obviously the frequency range the device supports, but what is
> assumed in the register lists? In other words, you should check for a
> specific frequency.
>
> > + dev_err(dev, "extclk frequency out of range: %u Hz\n", sensor->extclk_freq);
> > + return -EINVAL;
> > + }
> > +
> > + // request optional reset pin (usually active low) and assert it
> > + sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> > +
> > + v4l2_i2c_subdev_init(&sensor->sd, client, &ar0521_subdev_ops);
> > +
> > + sensor->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> > + sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
> > + sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > + ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
> > + if (ret)
> > + return ret;
> > +
> > + for (cnt = 0; cnt < AR0521_NUM_SUPPLIES; cnt++) {
> > + struct regulator *supply = devm_regulator_get(dev, ar0521_supply_names[cnt]);
> > +
> > + if (IS_ERR(supply)) {
> > + dev_info(dev, "no %s regulator found: %li\n", ar0521_supply_names[cnt], PTR_ERR(supply));
> > + return PTR_ERR(supply);
> > + }
> > + sensor->supplies[cnt] = supply;
> > + }
> > +
> > + mutex_init(&sensor->lock);
> > +
> > + ret = ar0521_init_controls(sensor);
> > + if (ret)
> > + goto entity_cleanup;
> > +
> > + ret = v4l2_async_register_subdev(&sensor->sd);
> > + if (ret)
> > + goto free_ctrls;
> > +
> > + ar0521_adj_fmt(&sensor->fmt);
>
> Please call this before registering the async subdev.
>
> > +
> > + dev_info(dev, "AR0521 driver initialized, master clock frequency: %s MHz, %u MIPI data lanes\n",
> > + mhz(sensor->extclk_freq), nlanes);
>
> I'd use dev_dbg(), if anything.
>
> > + return 0;
> > +
> > +free_ctrls:
> > + v4l2_ctrl_handler_free(&sensor->ctrls.handler);
> > +entity_cleanup:
> > + media_entity_cleanup(&sensor->sd.entity);
> > + mutex_destroy(&sensor->lock);
> > + return ret;
> > +}
> > +
> > +static int ar0521_remove(struct i2c_client *client)
> > +{
> > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> > +
> > + v4l2_async_unregister_subdev(&sensor->sd);
> > + media_entity_cleanup(&sensor->sd.entity);
> > + v4l2_ctrl_handler_free(&sensor->ctrls.handler);
> > + mutex_destroy(&sensor->lock);
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id ar0521_id[] = {
> > + {"ar0521", 0},
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(i2c, ar0521_id);
>
> Do you need the I²C device ID table? If not, please remove it.
>
> > +
> > +static const struct of_device_id ar0521_dt_ids[] = {
> > + {.compatible = "onnn,ar0521"},
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, ar0521_dt_ids);
> > +
> > +static struct i2c_driver ar0521_i2c_driver = {
> > + .driver = {
> > + .name = "ar0521",
> > + .of_match_table = ar0521_dt_ids,
> > + },
> > + .id_table = ar0521_id,
> > + .probe = ar0521_probe,
> > + .remove = ar0521_remove,
> > +};
> > +
> > +module_i2c_driver(ar0521_i2c_driver);
> > +
> > +MODULE_DESCRIPTION("AR0521 MIPI Camera subdev driver");
> > +MODULE_AUTHOR("Krzysztof Hałasa <khalasa@...p.pl>");
> > +MODULE_LICENSE("GPL v2");
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists